Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out
niko22225 said:
Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out
Click to expand...
Click to collapse
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
well said sir.
Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2
If i install the bootloader will it work better? The worst problem was that when phone freezed even when trying to play youtube video and I needed to take out battery 4 times a day because of freezes. And If I install all the things which are needed with ROM which would be better xbsall's rom or cm10 / or ThiaiZO3D? I will not act like I know these things I am total noob at this . And Can I brick my phone by changing bootloader or baseband?
Sent from my LG-P920 using xda app-developers app
p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app
Kodaro said:
Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2
Click to expand...
Click to collapse
And what is point of bootloader?
Sent from my LG-P920 using xda app-developers app
niko22225 said:
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Questions should be posted in general section or in a thread about a Rom.
Sent from my LG-P920 using xda app-developers app
Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app
niko22225 said:
Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I have installed Cyanogenmod on Multiple Devices not once has it ever bricked a device infact you're more likely to brick your device flashing official updates xbsall has a a guide to recover from a brick so its not even an issue. please do some more reading ics has root . it has recovery just not a Custom one (CWM/TWRP)thats why wkparks Bootloader exists.
IF you Ain't Devi'N Don't a Start A thread in Dev Section.
@Mod Close thread or move it to General.
actually the root doesn't work because you can't get into recovery.
'waiting for device.'
linuxlol said:
actually the root doesn't work because you can't get into recovery.
'waiting for device.'
Click to expand...
Click to collapse
actually, you should read more carefully
tang097 said:
actually, you should read more carefully
Click to expand...
Click to collapse
nope says 'waiting for device.'
it flashes ICS properly but not recovery.
Power + Vol Down + 3d button does nothing but boot phone normally.
berni987654321 said:
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Is there any guide to set up dualboot? and can I brick my phone with it and does It make phone slow ? I heard about xbsalls rom but it is saying that I first need to install different kernel but I dont know how to do that because my recovery doesnt have that option. And Which 4.1 or 4.2 would you recommend? I already used jb. but camera doesnt work and It would be really pain if I want to take a quick picture and I would need to reboot my phone for different rom with working camera. And If I install kernel will it be set on both of the roms? or I can set different for both of them?. btw Thanks for reply
linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I alreaady tried CM both 7.2 and 10 both didnt bricked my phone and I had CWM recovery working with them...and root too...
CyanogenMod works fine - 100%. The reason it get bricked is BECAUSE whoever installed it didn't even pay attention.
And regarding the CWMR in CM10 - it works. I used ADB-flashable version of OMAP4 BIOS (wkpark V1.25a bootloader), and flashed CWMR at the same time as an option.
P.S. I used SuperSU as original Superuser wasn't properly installed in the nightly distro of CM10. Nevertheless, root works fine.
P.S.S. The reason I bricked my LG Thrill 4G was because I was trying too hard.
Sent from my LG-P920 using XDA
Related
hello guys i flashed http://forum.xda-developers.com/showthread.php?t=1681317 this karnel and it was slow but after half hour my tab is in deep sleep ...nither it wakes up nor it connects and it also not chargeing ....plz help me m in big trouble....
Try to push power button ~8 second, it will be reboot your device.
Sent from my GT-P3110 using xda app-developers app
any way to revert back to stock karnel ????
Sheesh. Some users shouldn't flash. Sorry for being a bofh but rtfm.
Plus you posted in the wrong section.
Yes reflash it but I doubt you made a baackup.
Sent from my DROID X2 using xda premium
Questions should be posted in Q&A forums, not Development forums.
Thread moved.
arn1903 said:
any way to revert back to stock karnel ????
Click to expand...
Click to collapse
Download stock rom and flash through odin. If you don't get this then your pretty much screwed. Next time learn what your doing before you do it. Also learn how to go back
problem solved
i followed first option and flashed codeworkx cm9 rom ...and its performing very well......thanks guys for support
arn1903 said:
i followed first option and flashed codeworkx cm9 rom ...and its performing very well......thanks guys for support
Click to expand...
Click to collapse
Don't forget to make a backup
Hey guys i just bought an Optimus 3D from a friend . He changed stock ROM with an JellyBam 3.2.0. My question is : How can i get it back and use 3D mode , or what ROM is easy to install which supports 3D an all his stuff . My baseband is V21a (don't know very much about this) . If there are anyone who can tell me exactly what steps and which custom ROM i need to use please help me. I got stuck in so much threads didnt understood too much. Thanks
AW: [Q] Need help with an Optimus 3D
First of all, you need to know wich rom you want, because if you want to go back to gb you have to do other steps then if you want to go on ics... if you want 3d and everything try to flash ics, maybe darkroom ones or xbsas rom.
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
First of all, you need to know wich rom you want, because if you want to go back to gb you have to do other steps then if you want to go on ics... if you want 3d and everything try to flash ics, maybe darkroom ones or xbsas rom.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
i've read xbsas's guide but i'm not sure what i need to do. I need to inverse 2 pins on usb cable or something like that , i dont know how to change baseband and stuff , seems preety hard, atm i have jellybam 3.2.0 , was the only one where camera works . In other roms camera was freezing. Anyway if there is an easier way to install that ICS let me know . Thanks again
AW: [Q] Need help with an Optimus 3D
Yes, its very easy, you dont have tpo cross any cable, you have to flash two files via smartflash. Camera is working on ported ics, im using darkrooms rom and so far i dont have problems.
I will search the right thred you need and post it here.
Edit: this is the first step you have to do, the files you need to flash bin and fls is in xbsas thred for first ported rom
This one is for smartflash:
http://forum.xda-developers.com/showthread.php?t=1244490
Edit2: and this thred are for needed files and there are many guides too
http://forum.xda-developers.com/showthread.php?t=1956347
Edit3: the most impotant thing is to learn how to use smartflash, when you canhandle with smartflash, changing baseband is no problem.
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
Yes, its very easy, you dont have tpo cross any cable, you have to flash two files via smartflash. Camera is working on ported ics, im using darkrooms rom and so far i dont have problems.
I will search the right thred you need and post it here.
Edit: this is the first step you have to do, the files you need to flash bin and fls is in xbsas thred for first ported rom
This one is for smartflash:
http://forum.xda-developers.com/showthread.php?t=1244490
Edit2: and this thred are for needed files and there are many guides too
http://forum.xda-developers.com/showthread.php?t=1956347
Edit3: the most impotant thing is to learn how to use smartflash, when you canhandle with smartflash, changing baseband is no problem.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
This is very usefull , thanks man ,, i have 1 more question. Do i need to change baseband first then to flash ROM via smartflash?
And what about darkrooms rom , he has any bugs or stuff? if you have no problems with it i should consider flashing that one
AW: [Q] Need help with an Optimus 3D
Yes you can flash darkroom ones i have no issus so far, everything works great and i use it 2 weeks now. You can flash darkrooms one bit first you need to flash the first ported rom. Then root it and then you can flash darkrooms. At least flash baseband. You can flash basebsnd after you flash ported it doesnt matter
For more questions you can ask me
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
Yes you can flash darkroom ones i have no issus so far, everything works great and i use it 2 weeks now. You can flash darkrooms one bit first you need to flash the first ported rom. Then root it and then you can flash darkrooms. At least flash baseband. You can flash basebsnd after you flash ported it doesnt matter
For more questions you can ask me
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
So i dont need to change baseband first or something like this . Just like i said mine is V21a. So it should work right w/o problems right? And other thing: i use win7 . I might have problems with drivers ?
AW: [Q] Need help with an Optimus 3D
No, with drivers no problem and whnen you flash the new ported rom, your baseband will be overflashed with another baseband, because when you flash ported rom you flash two files bin and fls, try this baseband when everything works is goid if not change baseband its the same thing like flashing the bin and the fls file but this time you add only fls file you will understand this betterwhen you tried to flash ported rom first time
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
No, with drivers no problem and whnen you flash the new ported rom, your baseband will be overflashed with another baseband, because when you flash ported rom you flash two files bin and fls, try this baseband when everything works is goid if not change baseband its the same thing like flashing the bin and the fls file but this time you add only fls file you will understand this betterwhen you tried to flash ported rom first time
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
i have some problems with drivers. even if i hold power up button i get other than omap4430.
AW: [Q] Need help with an Optimus 3D
But your computer sends a sound when you plug in you smartphone, if yes, then open devoce manaher it will show up you smartphone, you must be fast click on it and install the right driver like in tutorial
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
But your computer sends a sound when you plug in you smartphone, if yes, then open devoce manaher it will show up you smartphone, you must be fast click on it and install the right driver like in tutorial
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
yes it shows up , imma try more today , hope it works ,
tried on windows xp and only way to install omap is to go to add new hardware , have disk , and when i install it it shows yellow sign and says that hardware couldnt start . dunno what to do
even if i follow steps it doesnt install omap , it installs other things like composite devices etc
AW: [Q] Need help with an Optimus 3D
You have too choose the right driver, when it shows up you smartphone click on it fast and install driver manually.
Sent from my LG-SU760 using xda app-developers app
Imma try more but when i try to choose it manualy it say something that not suitable fir 64 bit bla bla bla
Sent from my LG-P920 using xda app-developers app
AW: [Q] Need help with an Optimus 3D
Hmm i used 32bit system.... i dont know if it is a problem try this on a 32 bit system... im not a home now, when iam at home i will watch on my computer if there is another driver for 64 bit system..
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
Hmm i used 32bit system.... i dont know if it is a problem try this on a 32 bit system... im not a home now, when iam at home i will watch on my computer if there is another driver for 64 bit system..
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
thanks bro. meanwhile imma try a virtual win 7 32 bit
fuegen said:
thanks bro. meanwhile imma try a virtual win 7 32 bit
Click to expand...
Click to collapse
nah i cant get it done , on xp i cant install omap (i get yellow sign) and on win 7 32 bit i get omap driver but i cant get other ones this sucks
AW: [Q] Need help with an Optimus 3D
Omap is the right one, if you had installed omap, then everything is right. In the next step you have to change comport from omapdriver.
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
Omap is the right one, if you had installed omap, then everything is right. In the next step you have to change comport from omapdriver.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
so i dont need to get other drivers. in ports i cannot find that lge thing where i 'm suposed to change port to 41 like in pic
AW: [Q] Need help with an Optimus 3D
Ok pay attention, when you installed the driver, put out battery from your smartphone, and everything else. Afzer that, connect usbcable with your pc ( not with your o3d) only woth pc. Then connect it with your o3d and hold vol up button in the time you connect your smartphone. DONT RELESE THE VOL UP BUTTON IN THIS PROCESS. Your pc do a sound that the phone is connected, then it does the sound that it is disconnected, when your pc made the 3rd sound that you smartphone is connected put fast the battery in your phone, DONT RELESE THE VOL UP. wait until you get sw mode on screen. After that you can configure the port 41 in device manager. I made a pic for you..
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
Ok pay attention, when you installed the driver, put out battery from your smartphone, and everything else. Afzer that, connect usbcable with your pc ( not with your o3d) only woth pc. Then connect it with your o3d and hold vol up button in the time you connect your smartphone. DONT RELESE THE VOL UP BUTTON IN THIS PROCESS. Your pc do a sound that the phone is connected, then it does the sound that it is disconnected, when your pc made the 3rd sound that you smartphone is connected put fast the battery in your phone, DONT RELESE THE VOL UP. wait until you get sw mode on screen. After that you can configure the port 41 in device manager. I made a pic for you..
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
ok so i suceeded with OMAP driver but in windows xp keeps beeping , i mean it apears then dissapears and so on
your phone is booting to recovery only ,after installing custom recovery
here is the solution.
1.if you want to install custom rom and gapps, install twrp recovery
and install rom,gapps,and other mods
2.now your phone will not boot to system
3.after installing custom rom you need to install this
http://forum.xda-developers.com/attachment.php?attachmentid=928219&d=1330695090
see the video it is explained
if you are stuck in recovery mode you need to flash bootloader
you are saying that you need to flash again stock recovery( if i want to have custom recovery and i'm stuck in custom recovery and after i flash stock recovery what's the deal ?? ).. you're wrong in my opinion
here it is the solution: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
edit: i also think this thread is useless because in i9001 wiki page you'll find th solution for this problem and much more and even in some OP you'll see
edit 2: your video it's really cool.. i've just learned so much from it ))))
Here is the Proper fix
http://forum.xda-developers.com/showpost.php?p=32614896&postcount=2
Thanks for your effort but this is already known for a long time by almost everyone.
I had use today odin for a long time. Probably haven't flashed anything via odin at least in 6 months or more.
I got bootloop to recovery. Now it's working.
Wow, thanks for the effort you've put in making this thread, and even making a video, but next time, use THE SEARCH BOX.
Sent from my GT-I9001 using xda app-developers app
crishurazvi said:
Wow, thanks for the effort you've put in making this thread, and even making a video, but next time, use THE SEARCH BOX.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
hmm... i think you should make a video: How to use search box ...
https://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Haters gonna hate...
Sent from my GT-I9001 using xda app-developers app
crishurazvi said:
https://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Haters gonna hate...
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
hmm.. i don't think that all noobs understand that video :-?? ... but let's not be rude.. a little joking it's ok in my opinion
Before I start I would like to thank you in advance for dedicating your time to help me here (assuming that you did).I couldn't find the answers on the forums even though I searched.
1. Is there any way to backup my 2.2.1 froyo rom along with the kernel and baseband and EVERYTHING to make sure that if I take it back for repairs they can't accuse me of anything?
2. I have P500H and not the normal P500 mentioned in these forums, is there any risk of brick by flashing another rom designed for P500? And if it does work, will all of my cellular connectivity (RIL, calls, sms, 3G) keep working?
Eden3319 said:
Before I start I would like to thank you in advance for dedicating your time to help me here (assuming that you did).I couldn't find the answers on the forums even though I searched.
1. Is there any way to backup my 2.2.1 froyo rom along with the kernel and baseband and EVERYTHING to make sure that if I take it back for repairs they can't accuse me of anything?
2. I have P500H and not the normal P500 mentioned in these forums, is there any risk of brick by flashing another rom designed for P500? And if it does work, will all of my cellular connectivity (RIL, calls, sms, 3G) keep working?
Click to expand...
Click to collapse
1. yes with LGMDP or KDZ, but you need the stock rom that can be found in general LG P500 http://forum.xda-developers.com/showthread.php?t=1824618
2 read here, it was discussed before http://forum.xda-developers.com/showthread.php?t=1830232
the answers are all in this forum, just try to search, read all sticky and FAQ threads and you should find all answers, but if you want to someone confirm you this, you can make a new thread like this just to be sure, cheers
This is all alittle bit complicated coming from the world of Samsung, is it possible to create a nandroid backup of froyo? is KDZ the equivilant of Odin?
Eden3319 said:
This is all alittle bit complicated coming from the world of Samsung, is it possible to create a nandroid backup of froyo? is KDZ the equivilant of Odin?
Click to expand...
Click to collapse
Having used Odin and kdz I can say that KDZ is *RISKY*
It is maybe equivalent to Odin by the reference to the work they both do
And yeah you can create a nandroid backup of froyo
Sent from my GT-I9082 using xda premium
akiratoriyama said:
Having used Odin and kdz I can say that KDZ is *RISKY*
It is maybe equivalent to Odin by the reference to the work they both do
And yeah you can create a nandroid backup of froyo
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
I would not want anything risky (everything is risky, but I prefer to take it to a minimum level ) as this is not my phone. Do you recommend flashing custom recovery through rom manager?
Eden3319 said:
I would not want anything risky (everything is risky, but I prefer to take it to a minimum level ) as this is not my phone. Do you recommend flashing custom recovery through rom manager?
Click to expand...
Click to collapse
ROM manager has resulted in 100s of bricks (maybe more)
Don't use ROM manager on LGp500
You can use https://play.google.com/store/apps/details?id=acr.recovery.installation.utility
Download amonra 3.06 and extract the recovery.IMG
Then use the above app
Sent from my GT-I9082 using xda premium
akiratoriyama said:
ROM manager has resulted in 100s of bricks (maybe more)
Don't use ROM manager on LGp500
You can use https://play.google.com/store/apps/details?id=acr.recovery.installation.utility
Download amonra 3.06 and extract the recovery.IMG
Then use the above app
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Can it be used on froyo? and do I get the recovery image from here http://www.clockworkmod.com/rommanager ?
Eden3319 said:
Can it be used on froyo? and do I get the recovery image from here http://www.clockworkmod.com/rommanager ?
Click to expand...
Click to collapse
Yes the app is compatible with froyo
But I had issues with clockworkmod recovery
Download amonra 3.06 recovery for LGP500
It is the most stable recovery for this phone according to me :thumbup:
Here is the file for your convenience
http://www.mediafire.com/download/iwoygujg0qztoof/AmonRa_3.06_Recovery_ThunderG.zip
Copy the recovery.IMG extracted from the above file to the phones SD card And use the app I gave
Sent from my GT-I9082 using xda premium
akiratoriyama said:
Yes the app is compatible with froyo
But I had issues with clockworkmod recovery
Download amonra 3.06 recovery for LGP500
It is the most stable recovery for this phone according to me :thumbup:
Here is the file for your convenience
http://www.mediafire.com/download/iwoygujg0qztoof/AmonRa_3.06_Recovery_ThunderG.zip
Copy the recovery.IMG extracted from the above file to the phones SD card And use the app I gave
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
For some reason I can't root my device via GingerBreak v1.2 :\ It appears to be stuck, or just rooting forever. USB debugging is on.
Eden3319 said:
For some reason I can't root my device via GingerBreak v1.2 :\ It appears to be stuck, or just rooting forever. USB debugging is on.
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showthread.php?t=833953
Never used gingerbreak
Most say it works
***EDIT***
Just read that gingerbreak only supports 2.2.2 and not 2.2.1
Better use z4root i.e the from the above link
Sent from my GT-I9082 using xda premium
akiratoriyama said:
Try http://forum.xda-developers.com/showthread.php?t=833953
Never used gingerbreak
Most say it works
***EDIT***
Just read that gingerbreak only supports 2.2.2 and not 2.2.1
Better use z4root i.e the from the above link
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
z4root didn't work either, progressed alittle bit, then crashed to the launcher and the app became inaccessible. Tried twice.
EDIT: Superoneclick worked, proceeding now to recovery installation.
Eden3319 said:
z4root didn't work either, progressed alittle bit, then crashed to the launcher and the app became inaccessible. Tried twice.
EDIT: Superoneclick worked, proceeding now to recovery installation.
Click to expand...
Click to collapse
Good luck then
Sent from my GT-I9082 using xda premium
I'm sorry to bump this after so long, I just didn't have the courage to flash the recovery (when I got stuck on the fastboot screen I thought that the device is going to the trash can), I have now CWM v5.0.2.0 but I get a message:
E:Bad boot message
"recovery"
Is it safe to proceed? what does this message mean?
Eden3319 said:
I'm sorry to bump this after so long, I just didn't have the courage to flash the recovery (when I got stuck on the fastboot screen I thought that the device is going to the trash can), I have now CWM v5.0.2.0 but I get a message:
E:Bad boot message
"recovery"
Is it safe to proceed? what does this message mean?
Click to expand...
Click to collapse
That's a standard message which almost everyone gets on booting CWM recovery
Go forward and flash a ROM
Sent from my GT-I9082 using xda premium
akiratoriyama said:
That's a standard message which almost everyone gets on booting CWM recovery
Go forward and flash a ROM
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Do you recommend the builds from Jenkins site? Are they stable enough to flash? http://jenkins.androidarmv6.org/job/android/393/ This for example?
Eden3319 said:
Do you recommend the builds from Jenkins site? Are they stable enough to flash? http://jenkins.androidarmv6.org/job/android/393/ This for example?
Click to expand...
Click to collapse
I don't like *any* of the Jenkins builds as they are pathetically slow for me even on fresh installations
According to me you should either try Oxygen ICS or Rashed97's CM10
Remember the above ROMs are of my personal preference
And if you are inclined to use Jenkins build *try* them
Sent from my GT-I9082 using xda premium
akiratoriyama said:
I don't like *any* of the Jenkins builds as they are pathetically slow for me even on fresh installations
According to me you should either try Oxygen ICS or Rashed97's CM10
Remember the above ROMs are of my personal preference
And if you are inclined to use Jenkins build *try* them
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Isn't jenkins the only one that have 4.2.2? and soon maybe 4.3?
Eden3319 said:
Isn't jenkins the only one that have 4.2.2? and soon maybe 4.3?
Click to expand...
Click to collapse
There are some ROMs based on 4.2.2
One I like is
http://forum.xda-developers.com/showthread.php?t=2213967
Sent from my GT-I9082 using xda premium
akiratoriyama said:
There are some ROMs based on 4.2.2
One I like is
http://forum.xda-developers.com/showthread.php?t=2213967
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
I will use this http://forum.xda-developers.com/showthread.php?t=1811325 for now
And when this gets to the step that it's stable enough I'll use this http://forum.xda-developers.com/showthread.php?t=2382045 from the same developer.
I will let you know after I flash it, now I'm waiting for the battery to charge
Eden3319 said:
I will use this http://forum.xda-developers.com/showthread.php?t=1811325 for now
And when this gets to the step that it's stable enough I'll use this http://forum.xda-developers.com/showthread.php?t=2382045 from the same developer.
I will let you know after I flash it, now I'm waiting for the battery to charge
Click to expand...
Click to collapse
Best of luck
Do remember trimming the ROM before flashing gapps and then thanking my post otherwise you may get possible bootloop
And flash the oldBB fix after flashing the ROM (search it)
More info
http://forum.xda-developers.com/showthread.php?t=2149636
Sent from my GT-I9082 using xda premium
Just trying to be helpful here, here is a faster way to get from stock one-click to JB goodness.....
After you flash to stock with antonx kernel reboot into recovery and flash bhundvens blastoff kernel, reboot recovery, now you should be in blue 5.0.2.8....flash the newest cm9, it will reboot automatically into recovery for you to flash a second time, but don't, instead flash a JB Rom, (I flashed chaos from dao) once it rebooted into recovery...jellybean recovery, I flashed the Rom plus gapps. Rom booted just fine.
So.....save a little time from completely flashing the whole rom, waiting for it to boot and rebooting into recovery just to do it again till you get where you want.....cheers
hopefully it saves you some time
************************just like everyone else says "I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE"*****************
just one-click back and start over hee hee!!!!
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
AnAznBoy9724 said:
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
Click to expand...
Click to collapse
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
ArmyofTracy said:
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Getting back to stock and rooting are totally different subjects and shouldn't be asked in ROM threads anyways. Flashing the ROM are always in the OP.
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
limeaide said:
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
Click to expand...
Click to collapse
If you go back to our early JB ROMs
It was said to flash cm 9 or be on
a ICS ROM first if coming from GB.
Its said to be different now...
I still don't trust it..out of habit and
because it has always worked..
If I one-click back to stock I always
flash cm9 first then flash JB.
Sent from my SGH-T959V using xda premium
ArmyofTracy said:
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
AnAznBoy9724 said:
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
Click to expand...
Click to collapse
Why do we need a mod
to clean up this thread...
Because you made a Remark
and he called you out.
He said thank you...
Relax its all good...
Sent from my SGH-T959V using xda premium
It's a useless arguement no one needs to see.
:banghead:
ArmyofTracy said:
:banghead:
Click to expand...
Click to collapse
\m/