Database Info

bionix 2 overclock

hey guys im having a lil problem getting my 1.5ghz overcloxk to stay.. i deleted cpuspeed, set a profile, enable it to boot on startup in pimpmycpu after lik 5 10 mins it goes bacl to stock yet everything is still enabled under pimpmy cpu anyideas???
G2x 1.5ghz 2.3.3

aspiredude86 said:
hey guys im having a lil problem getting my 1.5ghz overcloxk to stay.. i deleted cpuspeed, set a profile, enable it to boot on startup in pimpmycpu after lik 5 10 mins it goes bacl to stock yet everything is still enabled under pimpmy cpu anyideas???
G2x 1.5ghz 2.3.3
Click to expand...
Click to collapse
Did save the profile?
Set as boot?
Reboot?
Try reading how to use pimpmycpu
Cuz it works for me....
Or try to flash the morfic kernel again
Sent from my LG-P999 using XDA Premium App

yea tried dat.. its weird cuz linpack at 1.5ghz after5 mins goes back to 35flops n my quadrant is da same..mayb a gllitch w linpack..
G2x 1.5ghz 2.3.3

there are still currently some issues with the governor(s) that the tegra chips will use and OC on boot is a little quirky as well... patience my friend...
the great LG gods will hopefully release a nice 2.3.4 build for us with a new baseband and drivers to make our devices number 1!

overclock question 1 to 1,2 ghz

hye folks,
i have rooted my asus transformer and installed prime1,9. I also tested the psx emulator with tekken 3 but the games lags so i thougt to increase the cpu from 1 ghz to 1,2 ghz can some tell what i have to do ..

abati said:
hye folks,
i have rooted my asus transformer and installed prime1,9. I also tested the psx emulator with tekken 3 but the games lags so i thougt to increase the cpu from 1 ghz to 1,2 ghz can some tell what i have to do ..
Click to expand...
Click to collapse
Use the seach button and read the kernel threads.
Rule #1

dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable

dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable

abati said:
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
Click to expand...
Click to collapse
You set the kernel speed to what you want with setcpu or something like it. These kernels tell you what the max is. You can set it however you want.

You obviously have no understanding or concept of what you want to do.
Therefore i suggest you dont do it.

i know exactly want i want, but it is so confusing cus i followed this how to
http://eeepadhacks.net/transformer-hacks/how-to-overclock-your-eeepad-transformer-to-1-6ghz/
after i installed the kernel and rebooted it freezed and i rebooted several times but it kept freezing.
So can you offer me some help so that i can overclock tot 1,2 ghz

flashing kernels is easy, making sure they're compatible can be tough. for you running Prime 1.9 I suggest clemsyns latest kernel. I think he's up to 21 now. you can find his tread in development. just also know that if the kernel flashing doesn't go well you can always reflash your rom to return to a kernel that works. once your new kernel is installed you need to install an app to regulate your CPU frequencies. I recommend setcpu which can be acquired on xda for free. I'm not going to post the link, just search for it, I believe its in android general forums. other than that you can search the market for overclock and choose from the many options available, just know that some programs might not work for the transformer.
EDIT: make sure to get clemsyns "b" kernel unless you have installed voodoo sound separately.

thnxx for the replay i wiil try the other romm

abati said:
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
Click to expand...
Click to collapse
Depends. In my case using Prime 1.9.1 with the "official" overclock kernel I can use in perfect stability 1.6ghz. Last time I gave a try to a clemsyns kernel (v9 maybe?) I could get stability only up to 1.2ghz..... it kinda varies between the kernel, rom and specific machine as some might work better than others.
Also as already said, just get a kernel that works with your rom and set it at the clock you want using SetCPU or another app.

Great work ! you helped me all out, now i overclocked to 1,2 ghz succesfully and i can play tekken 3 without any lag thnx to you !

[A700] [KERNEL] iconiaN - OC-UV

First as always, I am not responsible for any damages caused by using any files I release.
ok, right down to the point of this post.
I built kernel with the help of faux123 with OC/UV & GPU OC and have been asked to release it, so here it is:
Downloads:
iconiaN Kernel for A700 Final version
Currently it only clocks to 1.5GHz (Used SetCPU) more work is still to be done
GPU is OC'd to 520MHz
I welcome feedback and suggestions :fingers-crossed:
Please do NOT package these kernels with a custom ROM, instead point your users to this thread
Massive thanks to faux123 for complying with GPL, as I borrowed the GPU OC & UV from his kernel sources.
GPL States I should provide full source, so here it is: on GitHub

Wow. That's definitely a must have! I hope this will change the experience and launches apps faster.
Aren't the CPU and the GPU put together in one socket?

Will this kernel be packaged in iconiaN 2.2 by any chance?

I wondered why you wrote that the GPU is clocked at 1.5 Ghz. That`s a little bit too high in comparison with the mali 400 and other mobile GPU. Now I looked at your github and I see 520 MHz. A really nice Overclock too. Maybe you have clocked the CPU to 1.5 GHz?
I will test the kernel in a few minutes. Big THX for this

I was tired.
Was thinking CPU lol.
Yes it is a 520MHz sorry
I've not done the cpu oc yet though.
Sent from my EndeavorU using xda app-developers app

Hmmm I`ve downloaded the ZIP file 2 times now from your github and when I try to install it I got "Installation aborted". No detailled error-message :-/.

Ill check it when home
Sent from my EndeavorU using xda app-developers app

Vorbeth said:
This is a quick draft post, I will add more info etc when I have time.
First as always, I am not responsible for any damages caused by using any files I release.
ok, right down to the point of this post.
I built kernel with a GPU OC to 520MHz, and have been asked to release it, so here it is:
Downloads:
iconiaN Kernel for A700 md5:4c721b5e48aac85ca9bb52d1499499f6
iconiaN Kernel for A701 - not yet available, in testing md5:c362485581dd770eebdc85dce2244410
I welcome feedback and suggestions :fingers-crossed:
Please do NOT package these kernels with a custom ROM, instead point your users to this thread
Massive thanks to faux123 for complying with GPL, as I borrowed the GPU OC from his kernel sources.
GPL States I should provide full source, so here it is: on GitHub
Click to expand...
Click to collapse
Vorbeth,
I downloaded and installed this last night. It was stable, but seemed to lag a bit. I think the OC of the GPU helps less than an OC of the CPU. Running the modified kernel OC'd at 1.4 seems to have a greater impact than OC'ing the GPU... it really seems like 1.3 GHz is not fast enough to support the higher clock speed on the GPU...???
Obviously, getting the both ramped up would seem to be the best scenario.
Your work on all of this for the A700 is very much appreciated!
Sent from my A700 using xda premium

This kernel does have the 1.4GHz cpu speed.
I'm going to see if I can push it a bit more.
Aiming for 1.6GHz CPU & 600MHz GPU.
Sent from my EndeavorU using xda app-developers app

Yes Sir! If 600 GPU aren`t stable, I think we can life with 500 too, when the CPU runs fine at 1,6 Ghz.
I`ve tested Wild blood(gameloft game with the Unreal engine 3, that works after I edited the build.prob) with your default kernel, and I think it was around 20 fps so I definitively need more horse-power

Sorry for the Double post, but I have downloaded your new kernel from google docs, and I`ve got no error during the CWM installation. So nothing to worry about Sir

Vorbeth said:
I built kernel with a GPU OC to 520MHz, and have been asked to release it, so here it is:
Click to expand...
Click to collapse
What is the original GPU speed of the A700?
It seems that wiki thinks it's already 520MHz:
http://en.wikipedia.org/wiki/Tegra#Tegra_3

TomONeill said:
What is the original GPU speed of the A700?
It seems that wiki thinks it's already 520MHz:
http://en.wikipedia.org/wiki/Tegra#Tegra_3
Click to expand...
Click to collapse
If you look here https://github.com/iconiaN/android_kernel_acer_a700/commit/b2e3176ae3bd68d38835e776443cb84f82272b7e
You will see that it was 416MHz, the same as the nexus 7 and One X

Thank you for your reply. Seems like iiki doesn't have the correct information, since the One X is also listed there where the GPU says 520MHz.
Holy crap, THIS is getting attention on the friggin homepage, but this thread isn't? What is wrong with xda?

Hi, can I use this kernel with the nightly's build of cm 10?

BonzenPaule said:
Hi, can I use this kernel with the nightly's build of cm 10?
Click to expand...
Click to collapse
You may need to repack it with the CM10 ramdisk, but other than that it should work

Is it easy to implement NTFS write capabilities into the kernel?

Sean09 said:
Is it easy to implement NTFS write capabilities into the kernel?
Click to expand...
Click to collapse
This will be fixed at the weekend, with my current work hours I currently don't have time to compile the kernel and get it uploaded

Thanks Vorbeth - when you do get around to it, is it possible to post a link to a flashable kernel version that we can use with the CM10 nightlies?

This has been out a while now (and I've not had time to try it myself), but has anyone out there been using this this past while? Thoughts? Anyone? Bueller?

Overclocking

Hello, i have a quick question
I have installed CleanROM 3.2.1 odexed, and Unters stock Tf300t OC Kernel. I would like to ask how do you guys feel about overclocking your tab? I have installed SetCPU and limited overclocking to 1,5 ghz in performance mode, do you think i could do any damage to the cpu?

I don't think that kernel has overclocking. But I usually do it. Just don't constantly have it set to the Max CPU or it will shorten the CPU life by a lot.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Triger said:
Hello, i have a quick question
I have installed CleanROM 3.2.1 odexed, and Unters stock Tf300t OC Kernel. I would like to ask how do you guys feel about overclocking your tab? I have installed SetCPU and limited overclocking to 1,5 ghz in performance mode, do you think i could do any damage to the cpu?
Click to expand...
Click to collapse
I have mine overclocked up to 1.8 with Clemsyn's and it also turns the GPU up to 650. I personally love the overclock. It goes good with me running Hydro 6.0 with the cranked GPU, I think it's really only good if you have the GPU power to back it up as well. If you want to overclock it higher, check out Clemsyns!
elesbb said:
I don't think that kernel has overclocking. But I usually do it. Just don't constantly have it set to the Max CPU or it will shorten the CPU life by a lot.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
If his CPU is at 1.5 then it's overclocked, stock runs at 1.3

I think that up to 1,6GHz is harmless

lightitwithfire said:
I have mine overclocked up to 1.8 with Clemsyn's and it also turns the GPU up to 650. I personally love the overclock. It goes good with me running Hydro 6.0 with the cranked GPU, I think it's really only good if you have the GPU power to back it up as well. If you want to overclock it higher, check out Clemsyns!
If his CPU is at 1.5 then it's overclocked, stock runs at 1.3
Click to expand...
Click to collapse
I will try Clemsyns kernel now, but what is the stock frequency of the GPU?
Thank you for the replies, i also thought that overclocking to 1.6ghz will do no harm.
Edit: for some reason i can not boot with Clemsyns 1,6 ghz kernel. I used the kernel installer provided by the OP in the cleanrom thread. Any suggestions?

Triger said:
I will try Clemsyns kernel now, but what is the stock frequency of the GPU?
Thank you for the replies, i also thought that overclocking to 1.6ghz will do no harm.
Edit: for some reason i can not boot with Clemsyns 1,6 ghz kernel. I used the kernel installer provided by the OP in the cleanrom thread. Any suggestions?
Click to expand...
Click to collapse
I honestly can't find the stock frequency of the GPU anywhere, but I know its lower than 500!
Also, don't use the kernel installer in the OP of the CleanRom thread. Go into Clemsyn's thread and download the kernel you want to use.
Clemsyn's Thread: http://forum.xda-developers.com/showthread.php?t=1970704

Stock GPU=416Mhz

I say over clocking is doable until 1.6ghz. After that, I don't think it'll be great for the CPU
Sent from my TF300T using Tapatalk HD

kyokeun1234 said:
I say over clocking is doable until 1.6ghz. After that, I don't think it'll be great for the CPU
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
Mine is at 1.8 and it runs perfectly fine, no issues at all. Got any reasoning to think that it's not good for the CPU?

+1 for overclocking. I'm running the modified Unter kernel for the PA ROM and usually keep mine set at 1.6. Everything just seems to run so much smoother with it turned up.
Sent from my LG- LG855 running MegaTron using Sky blue Tapatalk.

[Q] Overclocking

So I just downloaded an app that will edit my kernel. It supports my phone. At 1.5 ghz it says my clock speed is 1512000. What would I put in to make it 1.7? I assume 1700000 is wrong. lol