Hey all,
I have the Note 10.1 with the deep grey digitizer. Anywho, it went SPLAT and is now shattered. The LCD is fine, just need the glass. Anyone know where I can get the deep grey digitizer replacement? Global Direct already scammed me.
Thanks
chip102 said:
Hey all,
I have the Note 10.1 with the deep grey digitizer. Anywho, it went SPLAT and is now shattered. The LCD is fine, just need the glass. Anyone know where I can get the deep grey digitizer replacement? Global Direct already scammed me.
Thanks
Click to expand...
Click to collapse
I repaired quite a lot of digitizers and I always buy them of ebay. Never had troubles with that. It's quite cheap too
http://www.ebay.com/sch/i.html?_trk...0&_nkw=note+10.1+digitizer&_sacat=0&_from=R40
speedfreak007 said:
I repaired quite a lot of digitizers and I always buy them of ebay. Never had troubles with that. It's quite cheap too
Click to expand...
Click to collapse
Yeah, I had seen those. I am looking for the grey one though. All I can seem to find are the black and white ones. It seems as though the grey and blue digitizers are not available as just glass, you need to buy them paired to the lcd. I guess Ill just have to settle with the black, I was really hoping to keep it grey though
chip102 said:
Yeah, I had seen those. I am looking for the grey one though. All I can seem to find are the black and white ones. It seems as though the grey and blue digitizers are not available as just glass, you need to buy them paired to the lcd. I guess Ill just have to settle with the black, I was really hoping to keep it grey though
Click to expand...
Click to collapse
i didn't know there's a black version of the Note 10.1. the gray is ugly as hell, so maybe I'll change it to black
btw, is the Wacom touch sensor actually in the digitizer? or is it in the screen (like galaxy s3)? how does it work?
speedfreak007 said:
i didn't know there's a black version of the Note 10.1. the gray is ugly as hell, so maybe I'll change it to black
btw, is the Wacom touch sensor actually in the digitizer? or is it in the screen (like galaxy s3)? how does it work?
Click to expand...
Click to collapse
I personally like the blue and gray screens the best. The digitizer is built onto the glass which is independant of the LCD
Hey guys, I shattered my digitizer. Do I need to get one with the adhesive already applied for like $30 or one for $17 that doesn't look like it has the adhesive already applied? Looking at Ebay, unless anyone has any better ideas.
Thanks.
chip102 said:
Hey all,
I have the Note 10.1 with the deep grey digitizer. Anywho, it went SPLAT and is now shattered. The LCD is fine, just need the glass. Anyone know where I can get the deep grey digitizer replacement? Global Direct already scammed me.
Thanks
Click to expand...
Click to collapse
I saw them on ebay a few times but not recently
Related
hey
today my sgs fell out of my car and the screen digitizer is broken just see the photos
do you know any site where i can get in original digitizer???
Dank u
Look in my thread and you find your answer. I bought my digitizer from here: http://cgi.ebay.com/Digitizer-LCD-Display-Screen-f-Samsung-Galaxy-S-i9000-/120595111860?cmd=ViewItem&pt=PDA_Accessories&hash=item1c14075fb4
thank u man
i will check this digitizer immediately could you say how long do you take in get it home ??
and how was the quality sorry for make in new thread i just was looking here but didn't find nothing about the broken screen
yeah, just do it yourself
Same Problem
I had the same experience my phone fell from hands from 3ft height on the ground and it developed crack not as many as yours, one single crack across the face. I just wanna know has your digitizer arrived .and when your screen cracked was it working normally ,because mine is working all right just the crack is there.
U have to pay ~50 .. ~60$
Replacing your own screen... you guys are pretty amazing.
hey i just orden mine in about 10 working day i will get it and you have to orden the full combo cuz the digitizer dont come alone for the moment
LCD and Digitizer Assembly Combo for Samsung i9000 Galaxy S
if you keep this thread you will get bester experience
http://forum.xda-developers.com/showthread.php?t=745262
I just noticed that cnn.cn now has the SGS digitizer on sale.
repairs
I will fix any broken galaxy s screen for £120 or buy the broken phone off you for £150.
The Part is preety much the whole phone you only save the mainboard and backcase.
the vib motor speaker all that sort of stuff is part of the screen.
So if you are buying just the glass or screen of ebay they are fake parts are void the warranty, also the quality will be very different.
ronalgps said:
hey
today my sgs fell out of my car and the screen digitizer is broken just see the photos
do you know any site where i can get in original digitizer???
Dank u
Click to expand...
Click to collapse
My screen is broken to, but the LCD is not. The phone works in 100%, even touch, but the glass is broken. I am not sure, is the digitizer everything that I need or do I have to buy LCD+digitizer to repair it.
tvrtkoq said:
My screen is broken to, but the LCD is not. The phone works in 100%, even touch, but the glass is broken. I am not sure, is the digitizer everything that I need or do I have to buy LCD+digitizer to repair it.
Click to expand...
Click to collapse
Same question.
Sorry for the ress, but didn't find anything saying about just the glass broken.
tvrtkoq said:
My screen is broken to, but the LCD is not. The phone works in 100%, even touch, but the glass is broken. I am not sure, is the digitizer everything that I need or do I have to buy LCD+digitizer to repair it.
Click to expand...
Click to collapse
They come as 1 part, so you'll need to replace both.
I've peaked around eBay and I found a few different digitalizer plus LCD replacements. What's the difference between g23 and 710d? I can seem to find either of those numbers on my phone box. Also how hard is it to replace the entire screen?
I have some experience with this. Either replace the digitizer/lcd assembly or sell the phone and get a new one. It's possible to replace just one, but it will always look like **** when you're done, and it's not just a matter of ungluing the two layers.
If you are willing to buy a new assembly, is actually a lot easier than I thought it would be. Make sure you work in a clean area. Also, be sure to get the att screen. The international one does look cooler with its HTC logo, but it's not a perfect fit. What that means is a lot of light bleed on the edges and capacitive buttons not lighting up at all.
Best of luck either way!
Viper Rom, baby!
I've replaced mine 3 times so far. The first time you replace it , it WILL be a major pain more than likely. I recommend you find a GOOD video on YouTube or something and follow it closely. (Careful there are a lot of videos that are just atrocious..). Also as stated, get the full assembly for LCD+digitizer and to be safe, get the one with at&t logo. I have heard that the international one works but the fit might not be perfect. Anyway, good luck.
Sent from my One X using xda premium
Does anyone have a reliable source for the at&t screen?
Thanks.
sheik124 said:
Does anyone have a reliable source for the at&t screen?
One X AT&T logo replacement screen
etechnotics.com/touch-screen-glass-digitizer-replacement-for-htc-one-x-s720e-htc-at-t-logo.html[/url]
Click to expand...
Click to collapse
shanar585 said:
sheik124 said:
Does anyone have a reliable source for the at&t screen?
One X AT&T logo replacement screen
etechnotics.com/touch-screen-glass-digitizer-replacement-for-htc-one-x-s720e-htc-at-t-logo.html[/url]
Click to expand...
Click to collapse
Unfortunately, that's just the digitizer :/ We need the digitizer + LCD.
I can't find a reliable source of the entire assembly. Debating getting both of these and putting it together myself:
http://www.etradesupply.com/htc-one-x-digitizer-touch-panel-with-at-t-logo.html
http://www.etradesupply.com/htc-one-x-lcd-screen.html
Click to expand...
Click to collapse
htc one x lcd & diditizer
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=170992426980
This one is AT&T and has capacitive light redirection things. The only one I bought that came with that
Also eBay has all the tape u need for LCD to frame, LCD to digitizer, and one for the digitizer to frame
May want to read this thread before buying an lcd. http://forum.xda-developers.com/showthread.php?t=2164760
Sent from my One X using Xparent Green Tapatalk 2
capacitive light
I would really like to figure out what these are called and were to get them.
these came with my LCD&digitizer from eBay. my last post above
billb23ok said:
I would really like to figure out what these are called and were to get them.
these came with my LCD&digitizer from eBay. my last post above
Click to expand...
Click to collapse
Have you installed the screen yet? I'm doubtful that it will fit in the AT&T/Telstra model.
thecoolestcow said:
Have you installed the screen yet? I'm doubtful that it will fit in the AT&T/Telstra model.
Click to expand...
Click to collapse
I havnt tried to turn it on but it says AT&T and the prefit looks nice. I will keep you up to date after I get the other parts and I put it together. The battery is dead at the moment
billb23ok said:
I havnt tried to turn it on but it says AT&T and the prefit looks nice. I will keep you up to date after I get the other parts and I put it together. The battery is dead at the moment
Click to expand...
Click to collapse
Any updates here? If you've installed it, how's the fit, do the capacitive buttons work, and is the contrast/sharpness correct?
thecoolestcow said:
Any updates here? If you've installed it, how's the fit, do the capacitive buttons work, and is the contrast/sharpness correct?
Click to expand...
Click to collapse
OK so the first phone I got wouldn't work with any screen. Problem cause it wouldn't. Turn on from the beginning. The second phone came. I plugged in LCD with green cable said at&t at top from source above and it wouldn't turn on so I plugged in another one from the source above it had a yellow cable said htc and the Sony one that ssid I had also turned on. The HTC ones seem to be slightly smaller but after I put the sticky tape I think it will all be OK. I just have to do it rite. Also, both screens from supplier above look remanufactured cause they both have black tape and the digitize seem to me to be thinner / glass not so thick. But they come with good black paint and light redirect things for soft buttons. So in short. Buying from him is unpredictable. As I got to different. Screen types. I have only bought two from him. I will post a picture after I assemble the phone today
So I got some good news for my Att version. I ordered this one:
http://www.ebay.com/itm/OEM-Full-LC...low-Green-Flex-For-HTC-One-X-XL-/360612529957
1. its not a sony, its a sharp. Its yellow on one side and full green on the other.
2. mine came with a sony screen. I killed my old screen getting it off (just lights up white). I booted my phone with the old sony screen, waited till the phone went to sleep, then swapped the screens. The sharp screen fired up just fine.
3. This was a perfect fit with the HTC logo. the ambient light sensor lined up, and it has light guides that line up. Also there was not the 2mm gap with the international versions.
4. One problem. The "holes" in the touch panel where the misaligned light guides/buttons are still there. So you will see the leds on the botton assembly when they light up. I recommend painting the blank spots over with a few layers of black paint.
I think what is happening is the international version has the buttons directly over top the led bar and does not use light guides.
I have a P6810. It has a broken display inside but the outside glass is good and the digitizer/touch screen still works. I mostly see offered entire assemblies consisting of display, digitizer and sometimes bezel for over $250. This is simply too expensive to repair a P6810. I would like to buy just the AMOLED w/o digitizer. Does anybody know of a source? Are display and digitizer able to be separated?
digitizer
guho said:
I have a P6810. It has a broken display inside but the outside glass is good and the digitizer/touch screen still works. I mostly see offered entire assemblies consisting of display, digitizer and sometimes bezel for over $250. This is simply too expensive to repair a P6810. I would like to buy just the AMOLED w/o digitizer. Does anybody know of a source? Are display and digitizer able to be separated?
Click to expand...
Click to collapse
If you can figure out how to separate the amoled display from the digitizer/touch panel, I would be glad to buy the touch panel from you.. My 6810 still has a great amoled display, but has two cracks in the glass touch panel.
Thanks,
heliosue said:
If you can figure out how to separate the amoled display from the digitizer/touch panel, I would be glad to buy the touch panel from you.. My 6810 still has a great amoled display, but has two cracks in the glass touch panel.
Thanks,
Click to expand...
Click to collapse
For other tablets, I see instructional videos on youtube where they use heat to unglue screen from digitizer. Seems tricky and I have not yet encountered any report of this working on a Galaxy Tab 7.7. That said, if you want to buy my P6810 for parts, please PM me. I've tested it with the multimedia dock using HDMI output, controlling it via the touch screen, so I know it is in working condition, except for the screen.
New Display
guho said:
I have a P6810. It has a broken display inside but the outside glass is good and the digitizer/touch screen still works. I mostly see offered entire assemblies consisting of display, digitizer and sometimes bezel for over $250. This is simply too expensive to repair a P6810. I would like to buy just the AMOLED w/o digitizer. Does anybody know of a source? Are display and digitizer able to be separated?
Click to expand...
Click to collapse
I sent my tab for repair lately at Samsung and they ordered the whole assembly [Digitizer+Bezel+AMOLED Display]. Because there is a portion in my screen that cannot pickup any touch input. They said they will install it with the whole assembly although the only problem is my digitizer. I think they sold it as a whole assembly and it will be risky if you separate the Digitizer from the AMOLED Display.
Digitizer and display
Fulaeetoy said:
I sent my tab for repair lately at Samsung and they ordered the whole assembly [Digitizer+Bezel+AMOLED Display]. Because there is a portion in my screen that cannot pickup any touch input. They said they will install it with the whole assembly although the only problem is my digitizer. I think they sold it as a whole assembly and it will be risky if you separate the Digitizer from the AMOLED Display.
Click to expand...
Click to collapse
Thanks to those of you who replied to my earlier post. I'm just too insecure about trying to take my 6810 apart, so I guess I'll just wait until someone sells one without cracks in it. Darn!
@Fulaeetoy: How much did Samsung charge if you don't mind my asking?
Fulaeetoy said:
I sent my tab for repair lately at Samsung and they ordered the whole assembly [Digitizer+Bezel+AMOLED Display].
Click to expand...
Click to collapse
Sent from my SCH-I535 using Tapatalk 2
guho said:
@Fulaeetoy: How much did Samsung charge if you don't mind my asking?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Nothing. Warranty covers it all. I also requested a new backplate 2 months ago about my backplate getting scratch after they flashed a stock firmware in my tab. They replaced it without asking questions. I think the new backplate cost $60 and $250 for the new display assembly. :good::good: for their customer service!
Hello ,
who can sale a Replacement Lenovo P2 Display LCD OLED or other Replacement for Lenovo P2 .
Sorry i have no other rubrik found for it .
try samsung vendors ! as our displays are made by samsung :|
mad72 said:
Hello ,
who can sale a Replacement Lenovo P2 Display LCD OLED or other Replacement for Lenovo P2 .
Sorry i have no other rubrik found for it .
Click to expand...
Click to collapse
look at aliexpress, search "For Lenovo VIBE P2 P2c72 LCD Display".
Hello and thanks for the answers, with Aliexpress is very often only the display without frame, which it badly attaches as the frame has very thin and little surface to glue
mad72 said:
Hello and thanks for the answers, with Aliexpress is very often only the display without frame, which it badly attaches as the frame has very thin and little surface to glue
Click to expand...
Click to collapse
I've already changed the display, everything is bundled, nothing needs to be glued.
P.S. The case is also sold, it is inexpensive ...
Chukatyi said:
I've already changed the display, everything is bundled, nothing needs to be glued.
P.S. The case is also sold, it is inexpensive ...
Click to expand...
Click to collapse
Yesterday my lenovo p2 had hard landing and front glass crunched. Although, LCD display and digitalizer are working just fine. I've found front glass on ebay for ~30$. Does anyone ever tried to replace only front glass in this model? Does anyone know if it's glued and if digitalizer is bundled with display module, or it's between glass and display?
Thanks in advance!
Chukatyi said:
I've already changed the display, everything is bundled, nothing needs to be glued.
P.S. The case is also sold, it is inexpensive ...
Click to expand...
Click to collapse
its samoled panel, and how much prize
salmanvts said:
its samoled panel, and how much prize
Click to expand...
Click to collapse
Thanks for the clue. I've just checked, and super amoled has integrated digitalizer, so there's hope that it's not the part of front glass. Although, there still possibility, that front glass is integrated part of whole display
I smashed touch panel and display itself, did claim yesterday and has been accepted for repair under Lloyds phone insurance included in silver package. Paid 50 pounds
PetrozPL said:
Yesterday my lenovo p2 had hard landing and front glass crunched. Although, LCD display and digitalizer are working just fine. I've found front glass on ebay for ~30$. Does anyone ever tried to replace only front glass in this model? Does anyone know if it's glued and if digitalizer is bundled with display module, or it's between glass and display?
Thanks in advance!
Click to expand...
Click to collapse
Did you find a solution for this?
My P2 has cracked glass (like others, dropped from a few feet, glass completely shattered).
The LCD and digitizer are still working fine so a new glass should fix it but is it possible to only replace the glass or do you need the complete glass/digitizer/LCD module?
Thanks
dtr2001 said:
Did you find a solution for this?
My P2 has cracked glass (like others, dropped from a few feet, glass completely shattered).
The LCD and digitizer are still working fine so a new glass should fix it but is it possible to only replace the glass or do you need the complete glass/digitizer/LCD module?
Thanks
Click to expand...
Click to collapse
Yes. I've read a lot about this and there's possibility to change only glass. Although it's extreamly riski to do so without proper tools and experience (almost certain to destroy super amoled display). So I've searched for a company who can do this, and found one in my country. They charge for it ~100$ and give 12 month of warranty. I've alredy send them my phone. Although due to shipment of new parts, I need to wait next two weeks for repair.
Not seeing replacement lcd for lenovo p2 anywhere online. Anyone know where to get one?
mankydogg said:
Not seeing replacement lcd for lenovo p2 anywhere online. Anyone know where to get one?
Click to expand...
Click to collapse
I have the same problem, there's an abundance of any other phone screen LCD compared to the one for the Lenovo P2. Are the screens getting discontinued for whatever reason?
Aliexpress should have it!
alese13 said:
Aliexpress should have it!
Click to expand...
Click to collapse
No stock on AliExpress, I have checked.
I can find a replacement glass only but I think the risk of damage to the current digitizer/amoled is high when removing the cracked glass.
Bump
Has anybody got a reliable source? There seems to be a global shortage of these bloody screens and besides the official Lenovo replacement costing 90% of the price of the phone, there are no other options available anywhere. Nothing on AliExpress, BangGood, Alibaba, eBay and anywhere else in my coutry.
for this reason i use a RIGGED CASE on my p2 eheheheheh
atm the screen is difficult to find!! better to use a nice cover......
https://www.youtube.com/watch?v=qQd0zJc9YPA
Maybe you should ask uploader of this movie.
You can currently buy it on AliExpress for $189.99. However, you can buy the entire bloody phone on BangGood for $209.99.
Hi, I have broken my display and as I'm looking on AliExpress, there are displays for something like 20$. And then Lenovo P2 display 190$, WTF?
Do you know if there will be cheaper displays available? Personally, I'm pessimist :/
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
SolarisSixth said:
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
Click to expand...
Click to collapse
According to this: Ali Express
LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the LCD image is either black liquid or cracked you need a complete screen.
Click to expand...
Click to collapse
According to that; If the glass is cracked, I only need the Digitizer replaced.
I am happy to get the whole thing, its just I have already ordered a Digitizer and thought this was all I needed. I could be wrong.
Any recommendation on the type of screen I should purchase for best results?
Ali Express Search
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi there
I got the same Problem. Screen and Touch and everything is OK. Did you manage to replace the broken glas? Was the Ebay thing okei or did u buy something different?
Cheers
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Any update on this? I'm in the same situation, front glass is cracked but phone otherwise fine. Replacement is only $10, but can just the glass even be replaced?
I just bought the whole LCD/Digitizer for $60, not even going to attempt to separate just the glass
emanuel.caesar said:
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Click to expand...
Click to collapse
Hey emanuel.caesar,
thanks for your helpful post. A few further questions from my side:
which lcd did you choose exactly? Are you still satisfied with the quality? And the last question Does the video guide for the Mi Mix 2 work for the Mi Mix 2s as well or are many things different? Thank you in advance for a short reply.
Hello,
Is not a good idea to try to just replace de LCD screen. I did this operation many times in the past and I can confirm that's a long operation (~1h30), there's a lot of risks that you break the digitizer and for a good result, you need LCD glue and a UV machine.
So, I think it's a better idea to replace all the screen: LCD + Digitizer.
Any suggested YouTube videos to replace the glass + LCD + digitizer?
Looking at a used phone with broken glass. It's like $10 for glass or $32 for the whole set and if I recall last time I had glass swapped it was like $60 labor and no guarantee the LCD wouldn't break. I'm pretty technical have repaired plenty of phones Android and iPhone. Anyone have a good link for removing the LCD / digitizer / glass unit? Is this like the Samsung where you need to use a blow dryer to heat the adhesive to get it off? Or like an iPhone where you just take screws out and pry the panel out? Much appreciated