[Q] Help me fixing KT474 kernel's issue - Verizon Samsung Galaxy S III

Hi Guys,
This is my first post.
I've been running AOKP 4.2.2 (aokp d2vzw jb-mr1 milestone-1) for the Verizon Galaxy S3 (d2vzw). I flashed KT747-AOSP-JB-MR1-3.4-VZW-04-19-20, cleared out cache and dalvik, fix permissions and reboot it. It waited for a while but nothing was happened and got a black screen.
Please help me fix KT474 issues.
Thank you,
Sportster007

Sportster007 said:
Hi Guys,
This is my first post.
I've been running AOKP 4.2.2 (aokp d2vzw jb-mr1 milestone-1) for the Verizon Galaxy S3 (d2vzw). I flashed KT747-AOSP-JB-MR1-3.4-VZW-04-19-20, cleared out cache and dalvik, fix permissions and reboot it. It waited for a while but nothing was happened and got a black screen.
Please help me fix KT474 issues.
Thank you,
Sportster007
Click to expand...
Click to collapse
You should check to make sure that your ROM and your custom kernel are both the same version. There are a lot of 3.0 kernel ROMs out there and if you flash a 3.4 kernel then I believe that you're going to have problems.

CrustyMcLovin said:
You should check to make sure that your ROM and your custom kernel are both the same version. There are a lot of 3.0 kernel ROMs out there and if you flash a 3.4 kernel then I believe that you're going to have problems.
Click to expand...
Click to collapse
Yeah, I had checked both of AOKP and KT474 are not matched. My latest AOKP kernel version is 3.4.40 and KT474 kernel version is 3.4.41.
Thanks again.
Sportster007

Related

[Q] Play store not working for tf101 on cm10 rom

I just got the newest rom of cm or cm10 and then I went on the play store and it wouldn't work
Then I re flashed and data reset and the same thing happens
Please help
Josh3556 said:
I just got the newest rom of cm or cm10 and then I went on the play store and it wouldn't work
Then I re flashed and data reset and the same thing happens
Please help
Click to expand...
Click to collapse
Try the older version of gapps and see if that helps did you clear cache and data in setting/apps for the market
Samsung Galaxy S3
AOKP 4.2.2 by Task650
Ktoonz Kernel w/KingBeatz
ASUS TF101
A.R.H.D ICS 3.6
Harmony Kernel w/KingBeatz

Cannot flash new kernels!

I am running cyanogenmod10.1 on my galaxy s2. It is a wild for the night (nightly unofficial ROM) with 4.2.2 jelly bean build. I love the new ROM but can't believe the stock cyanogenmod kernel can't be over clocked. Anyways I've been looking at kernels that support 4.2.2 and tried to flash lean kernel(and a couple others) in recovery mode. It does a couple things in recovery then says install complete but when I reboot I still have stock cm10.1 kernel! Can somebody please help and I am also open to suggestions for kernels because I want one that runs like the one I have but can be OC'd. THANK YOU!
sent from galaxy s2 running CyanogenMod 10.1
AndroiDisCracK said:
I am running cyanogenmod10.1 on my galaxy s2. It is a wild for the night (nightly unofficial ROM) with 4.2.2 jelly bean build. I love the new ROM but can't believe the stock cyanogenmod kernel can't be over clocked. Anyways I've been looking at kernels that support 4.2.2 and tried to flash lean kernel(and a couple others) in recovery mode. It does a couple things in recovery then says install complete but when I reboot I still have stock cm10.1 kernel! Can somebody please help and I am also open to suggestions for kernels because I want one that runs like the one I have but can be OC'd. THANK YOU!
sent from galaxy s2 running CyanogenMod 10.1
Click to expand...
Click to collapse
Are you wiping cache and dalvik cache? There's really no reason to overclock it dude. I owned an s2 and saw no reason to overclock it ran just fine without hiccups
Sent from my CLEAN Note ll
brandonarev said:
Are you wiping cache and dalvik cache? There's really no reason to overclock it dude. I owned an s2 and saw no reason to overclock it ran just fine without hiccups
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
Yea I wiped both but I wanted to have it to maybe save battery at times(like the lean kernel
) where i can OC at other times. But im starting to think they were bad kernel downloads because i flashed dream kernel and it worked. The site said it supports both JB and ICS but an ICS screen came up in recovery and would not allow reboot or restore to CM10 so I restored to origional s2 rom(running ICS) then reflashed rom and Gapps then restored to CM10 backup so at least I got to where I started XD but thanks

CM 10.2 Nightly 20130906 Problems

Since I am not allowed to post in the official development thread: Installing the above nightly (TWRP 2.5) leads to a non booting phone for me. I believe there something wrong with the release. Please be aware.
Use twrp 2.3.3, 2.5 is known to have issues. I've also read 2.6 works for some.
Sent from my HTC One S using xda app-developers app
This build is broken on all devices...
chevydevil said:
Since I am not allowed to post in the official development thread: Installing the above nightly (TWRP 2.5) leads to a non booting phone for me. I believe there something wrong with the release. Please be aware.
Click to expand...
Click to collapse
Same here for both 20130906 and 20130907 ... Tried to flash the kernel with both boot.img but nothing did the trick.
Had to go back to kernel 20130905 and same nightly version
(I have clockworkmod though, latest version for that device - HTC ONE S)
HBOOT 2.15.0000
Radio 1.11.50.05.28
What should I do to get the latest nightly ?
(yep, I'm a noob)
Thanks for your help
They posted something on facebook saying not to install these nightlies because they're boned atm. I'm sure a better one will be out soon.
Grab the 2.6 TWRP! The nightlies are running fine for me, I've been flashing both the CM10.2 nightlies and the Pac-Man Rom 4.3 Nightlies. Pac is using the CM's and it's been good as far as I've known
Nosreves91 said:
Grab the 2.6 TWRP! The nightlies are running fine for me, I've been flashing both the CM10.2 nightlies and the Pac-Man Rom 4.3 Nightlies. Pac is using the CM's and it's been good as far as I've known
Click to expand...
Click to collapse
There were several days of broken nightlies for all devices, including the 9/6, so it has nothing to do with TWRP.

[Q] Help with OSE 4.3.1 and KT747 Kernel

Hey all, after some searching, I have to do 2 things: 1) admit some ignorance, 2) get some help.
Currently I am running OSE 4.3.1 with 3.4.66cm kernel. I REALLY want to put the KT747 kernel in. So is this even possible? I have tried several times, following instructions to the letter, and it just hangs on the KT boot image forever. Oh, the ignorance is knowing if this is ASOP or TW. Thanks for any and all help.
Beej1970 said:
Hey all, after some searching, I have to do 2 things: 1) admit some ignorance, 2) get some help.
Currently I am running OSE 4.3.1 with 3.4.66cm kernel. I REALLY want to put the KT747 kernel in. So is this even possible? I have tried several times, following instructions to the letter, and it just hangs on the KT boot image forever. Oh, the ignorance is knowing if this is ASOP or TW. Thanks for any and all help.
Click to expand...
Click to collapse
Cm 10.2 I believe......AOSP
Sent from my SCH-I535 using Tapatalk
Shallow_1 said:
Cm 10.2 I believe......AOSP
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thanks!
Does anyone know why I cant flash KT747 onto this ROM? I see in the ROM thread, others have, but i dont have the ability to post there yet
Beej1970 said:
Thanks!
Does anyone know why I cant flash KT747 onto this ROM? I see in the ROM thread, others have, but i dont have the ability to post there yet
Click to expand...
Click to collapse
Are you flashing the correct kernel build, 4.3 jellybean aosp? And what is the build date of the OSE ROM? It could be a compatibility issue. Are you doing any wipes when flashing the kernel?
I'm waiting for Android Milky Way
samsgun357 said:
Are you flashing the correct kernel build, 4.3 jellybean aosp? And what is the build date of the OSE ROM? It could be a compatibility issue. Are you doing any wipes when flashing the kernel?
I'm waiting for Android Milky Way
Click to expand...
Click to collapse
I am on OSE build 10/21, and I tried the KT747-AOSP-JB-MR2-3.4-VZW-10-11-2013, then the KT747-AOSP-JB-MR2-3.4-VZW-11-04-2013.
both of them got to KT boot image and just hung there. I have the KT747 in another ROM (4.1.2) and love to have in with ROM, perfect marriage I think
"Are you doing any wipes when flashing the kernel?"
Yep, even tried a full data wipe, cache, & Delvick withou any luck.

[Q] CyanogenMod 10.2 Stable Release.

Hello guys, I need some help! My GT-P3113 which is running stock 4.1.1 rooted, has a problem with WiFi. I checked the modem, network settings but nothing happened. So I wiped data and cache with C.W.M. I booted up succesfully on 4.1.1 (from the beginning), and I followed the usual process:
Choose your country - date and time - add Samsung account (I skipped it) - add Gmail account (ERROR,ERROR,ERROR).
So I thought that I have to flash a custom ROM in order to get my tablet fixed.(not to mention that custom ROMS are better than stocks). I thought of CM 10.2 but I noticed that for GT-P31XX devices, everyone is flashing a nightly and not a stable release of 10.2 . And I would like to ask you, what would happened if I flashed the CyanogenMod 10.2 stable. If it's not bad, can someone tell me how to install it?
A huge thanks to everyone
dimsar2013 said:
Hello guys, I need some help! My GT-P3113 which is running stock 4.1.1 rooted, has a problem with WiFi. I checked the modem, network settings but nothing happened. So I wiped data and cache with C.W.M. I booted up succesfully on 4.1.1 (from the beginning), and I followed the usual process:
Choose your country - date and time - add Samsung account (I skipped it) - add Gmail account (ERROR,ERROR,ERROR).
So I thought that I have to flash a custom ROM in order to get my tablet fixed.(not to mention that custom ROMS are better than stocks). I thought of CM 10.2 but I noticed that for GT-P31XX devices, everyone is flashing a nightly and not a stable release of 10.2 . And I would like to ask you, what would happened if I flashed the CyanogenMod 10.2 stable. If it's not bad, can someone tell me how to install it?
A huge thanks to everyone
Click to expand...
Click to collapse
Stable that's mean it can be use for daily use and have less bugs, maybe there's no bugs
but , i'm not sure if cm10.2 is exist, you can check it on cyanogenmod sites
for instal it, you have to rooted your phone and have installed cwm recovery for instal the rom
CM10.2 Stable not exist for Galaxy Tab 2 at the moment, but the nightlys are much stable.
Maybe take a look on SlimBean 4.3.1 Stable 2.2 - i love it
Single-Step to get a Custom-Recovery and Root: http://forum.xda-developers.com/showthread.php?t=2510669
@dimsar2013
Don't worry about "stable", it is just a label. CM10.2 nightly builds for Tab 2 are already very stable, I use one from October 17th and it is bug-free.
Slimbean 4.3 Stable 2.2 is awesome!!! The device runs very smoothly and the battery life is so big!!!!! It is an amazing ROM. Way more better than the Stock TouchWiz themed ROM.
Sent from my GT-P3110 using XDA Premium 4 mobile app
SlimBean thread closed http://forum.xda-developers.com/showthread.php?t=2430783
so in the past week or so ive seen someone take my ROM, create a thread and released as his own. today i see another cat kang the $hit out of my device trees, and claim "me only" in credits, da fuq?
that was the straw that broke the Tab 2's back, for me anyway
Click to expand...
Click to collapse

Categories

Resources