I just got the newest rom of cm or cm10 and then I went on the play store and it wouldn't work
Then I re flashed and data reset and the same thing happens
Please help
Josh3556 said:
I just got the newest rom of cm or cm10 and then I went on the play store and it wouldn't work
Then I re flashed and data reset and the same thing happens
Please help
Click to expand...
Click to collapse
Try the older version of gapps and see if that helps did you clear cache and data in setting/apps for the market
Samsung Galaxy S3
AOKP 4.2.2 by Task650
Ktoonz Kernel w/KingBeatz
ASUS TF101
A.R.H.D ICS 3.6
Harmony Kernel w/KingBeatz
Related
Hi Guys,
This is my first post.
I've been running AOKP 4.2.2 (aokp d2vzw jb-mr1 milestone-1) for the Verizon Galaxy S3 (d2vzw). I flashed KT747-AOSP-JB-MR1-3.4-VZW-04-19-20, cleared out cache and dalvik, fix permissions and reboot it. It waited for a while but nothing was happened and got a black screen.
Please help me fix KT474 issues.
Thank you,
Sportster007
Sportster007 said:
Hi Guys,
This is my first post.
I've been running AOKP 4.2.2 (aokp d2vzw jb-mr1 milestone-1) for the Verizon Galaxy S3 (d2vzw). I flashed KT747-AOSP-JB-MR1-3.4-VZW-04-19-20, cleared out cache and dalvik, fix permissions and reboot it. It waited for a while but nothing was happened and got a black screen.
Please help me fix KT474 issues.
Thank you,
Sportster007
Click to expand...
Click to collapse
You should check to make sure that your ROM and your custom kernel are both the same version. There are a lot of 3.0 kernel ROMs out there and if you flash a 3.4 kernel then I believe that you're going to have problems.
CrustyMcLovin said:
You should check to make sure that your ROM and your custom kernel are both the same version. There are a lot of 3.0 kernel ROMs out there and if you flash a 3.4 kernel then I believe that you're going to have problems.
Click to expand...
Click to collapse
Yeah, I had checked both of AOKP and KT474 are not matched. My latest AOKP kernel version is 3.4.40 and KT474 kernel version is 3.4.41.
Thanks again.
Sportster007
Hi Guys
Forgive my ignorance whats the difference from EOS3 roms to EOS4 roms
I have just flash my xoom to eos jz054k nightly 155, but would like the very latest stable 4.2.xx the one
that supports panoramic camera, and would to take advantage of using it on forthcoming holidays
looking in EOS4 roms there is lots of nightlys to choose from, would they flash over my EOS3 155 nightly
using TWRP recovery ??
You would have to install a 4.2 ROM on a CLEAN system. Meaning, you need to do a CWM Factory Data Reset prior to flashing the 4.2 ROM along with the correct Gapps.
jelly bean 4.1.2 to 4.2.2 rom
Hi Whats
The latest stable rom on 4.2.xx that I could flash on my xoom , and still have all hardware
working like keyboard etc..???
Mjamocha said:
You would have to install a 4.2 ROM on a CLEAN system. Meaning, you need to do a CWM Factory Data Reset prior to flashing the 4.2 ROM along with the correct Gapps.
Click to expand...
Click to collapse
huey1945 said:
Hi Whats
The latest stable rom on 4.2.xx that I could flash on my xoom , and still have all hardware
working like keyboard etc..???
Click to expand...
Click to collapse
Unfortunately, you will have to search the threads for that answer. I've switched back to 4.1.2 a long time ago, as I don't particularly care for the JB 4.2.x OS. Sorry.
I am running cyanogenmod10.1 on my galaxy s2. It is a wild for the night (nightly unofficial ROM) with 4.2.2 jelly bean build. I love the new ROM but can't believe the stock cyanogenmod kernel can't be over clocked. Anyways I've been looking at kernels that support 4.2.2 and tried to flash lean kernel(and a couple others) in recovery mode. It does a couple things in recovery then says install complete but when I reboot I still have stock cm10.1 kernel! Can somebody please help and I am also open to suggestions for kernels because I want one that runs like the one I have but can be OC'd. THANK YOU!
sent from galaxy s2 running CyanogenMod 10.1
AndroiDisCracK said:
I am running cyanogenmod10.1 on my galaxy s2. It is a wild for the night (nightly unofficial ROM) with 4.2.2 jelly bean build. I love the new ROM but can't believe the stock cyanogenmod kernel can't be over clocked. Anyways I've been looking at kernels that support 4.2.2 and tried to flash lean kernel(and a couple others) in recovery mode. It does a couple things in recovery then says install complete but when I reboot I still have stock cm10.1 kernel! Can somebody please help and I am also open to suggestions for kernels because I want one that runs like the one I have but can be OC'd. THANK YOU!
sent from galaxy s2 running CyanogenMod 10.1
Click to expand...
Click to collapse
Are you wiping cache and dalvik cache? There's really no reason to overclock it dude. I owned an s2 and saw no reason to overclock it ran just fine without hiccups
Sent from my CLEAN Note ll
brandonarev said:
Are you wiping cache and dalvik cache? There's really no reason to overclock it dude. I owned an s2 and saw no reason to overclock it ran just fine without hiccups
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
Yea I wiped both but I wanted to have it to maybe save battery at times(like the lean kernel
) where i can OC at other times. But im starting to think they were bad kernel downloads because i flashed dream kernel and it worked. The site said it supports both JB and ICS but an ICS screen came up in recovery and would not allow reboot or restore to CM10 so I restored to origional s2 rom(running ICS) then reflashed rom and Gapps then restored to CM10 backup so at least I got to where I started XD but thanks
soo i have baked bean rom on my tab right now witch is a unoffical cm10.1 i think and i havent updated it in a long time so i think i should switch to cyangenmod. now i looked at cm10.2 on xda first and i noticed jb bootloaders that you would have to flash with odin, i dont know how to do this, for cm 10.1 should i just have to flash the stable zip and gapps??
I am running the stable release of CyanogenMod 10.1.2_p3100
I downloaded the .zip file and gapps for 4.2.2 and pasted both to my sdcard.
Then I went to CMW mode
cleared the cache,files of previous ROM
flashed the CM10.1.2 stable release for p3100 zip
after that again I flashed the gapps for 4.2.2 zip
and rebooted my device. Now my tab is running it perfectly.
Procedure is same, Be sure to download the correct zip for the correct model number (mine is p3100) and the gapps for 4.3 (because cm10.2 is running 4.3)
You can browse gapps by below link
http://goo.im/gapps/
Go ahead trozzul
Sent from my GT-P3100 using XDA Premium 4 mobile app
Trozzul said:
soo i have baked bean rom on my tab right now witch is a unoffical cm10.1 i think and i havent updated it in a long time so i think i should switch to cyangenmod. now i looked at cm10.2 on xda first and i noticed jb bootloaders that you would have to flash with odin, i dont know how to do this, for cm 10.1 should i just have to flash the stable zip and gapps??
Click to expand...
Click to collapse
If you're coming from Jellybean, there's no need to flash JB bootloaders prior to flashing CM 10.1 or 10.2.
dynospectrum said:
If you're coming from Jellybean, there's no need to flash JB bootloaders prior to flashing CM 10.1 or 10.2.
Click to expand...
Click to collapse
ok thanks xD just recently I got my hands on a galaxy s cappy and in order to get gingerbread and up roms I had to flash gingerbread bootloaders, if I didn't it would screw up the phone so I thought this was the same way with my tab.
Trozzul said:
ok thanks xD just recently I got my hands on a galaxy s cappy and in order to get gingerbread and up roms I had to flash gingerbread bootloaders, if I didn't it would screw up the phone so I thought this was the same way with my tab.
Click to expand...
Click to collapse
10.1 is JB that is why you don't need to flash the JB Booloader for flashing 10.2 which is also JB.
Hello guys, I need some help! My GT-P3113 which is running stock 4.1.1 rooted, has a problem with WiFi. I checked the modem, network settings but nothing happened. So I wiped data and cache with C.W.M. I booted up succesfully on 4.1.1 (from the beginning), and I followed the usual process:
Choose your country - date and time - add Samsung account (I skipped it) - add Gmail account (ERROR,ERROR,ERROR).
So I thought that I have to flash a custom ROM in order to get my tablet fixed.(not to mention that custom ROMS are better than stocks). I thought of CM 10.2 but I noticed that for GT-P31XX devices, everyone is flashing a nightly and not a stable release of 10.2 . And I would like to ask you, what would happened if I flashed the CyanogenMod 10.2 stable. If it's not bad, can someone tell me how to install it?
A huge thanks to everyone
dimsar2013 said:
Hello guys, I need some help! My GT-P3113 which is running stock 4.1.1 rooted, has a problem with WiFi. I checked the modem, network settings but nothing happened. So I wiped data and cache with C.W.M. I booted up succesfully on 4.1.1 (from the beginning), and I followed the usual process:
Choose your country - date and time - add Samsung account (I skipped it) - add Gmail account (ERROR,ERROR,ERROR).
So I thought that I have to flash a custom ROM in order to get my tablet fixed.(not to mention that custom ROMS are better than stocks). I thought of CM 10.2 but I noticed that for GT-P31XX devices, everyone is flashing a nightly and not a stable release of 10.2 . And I would like to ask you, what would happened if I flashed the CyanogenMod 10.2 stable. If it's not bad, can someone tell me how to install it?
A huge thanks to everyone
Click to expand...
Click to collapse
Stable that's mean it can be use for daily use and have less bugs, maybe there's no bugs
but , i'm not sure if cm10.2 is exist, you can check it on cyanogenmod sites
for instal it, you have to rooted your phone and have installed cwm recovery for instal the rom
CM10.2 Stable not exist for Galaxy Tab 2 at the moment, but the nightlys are much stable.
Maybe take a look on SlimBean 4.3.1 Stable 2.2 - i love it
Single-Step to get a Custom-Recovery and Root: http://forum.xda-developers.com/showthread.php?t=2510669
@dimsar2013
Don't worry about "stable", it is just a label. CM10.2 nightly builds for Tab 2 are already very stable, I use one from October 17th and it is bug-free.
Slimbean 4.3 Stable 2.2 is awesome!!! The device runs very smoothly and the battery life is so big!!!!! It is an amazing ROM. Way more better than the Stock TouchWiz themed ROM.
Sent from my GT-P3110 using XDA Premium 4 mobile app
SlimBean thread closed http://forum.xda-developers.com/showthread.php?t=2430783
so in the past week or so ive seen someone take my ROM, create a thread and released as his own. today i see another cat kang the $hit out of my device trees, and claim "me only" in credits, da fuq?
that was the straw that broke the Tab 2's back, for me anyway
Click to expand...
Click to collapse