I bought this on Amazon for $8.99. It is your standard "Book Type" case. It is PU Leather of a good quality and I didn't notice any of the smell a lot of PU Leather has. All the cut outs line up perfectly. The case comes in 5 colors. I chose Black and it looks well enough to pass for leather.
My only gripe with the case is that it has an external elastic loop to hold the pen. (???) It seems that all the cases on Amazon had the loop, which is unneeded. The elastic loop does interfere with the volume rocker and the IR blaster. I plan on cutting it off.
I was only planning on using this inexpensive case until more cases hit the market. After all it's only $8.99. But after using it the past week I see no reason to look any further. It's a well built case that looks good and offers a lot of protection to all the edges...even that protruding camera.
Thanks for the review! The stylus loop is a little silly and just goes to show that they didn't really think about the device when they received the dimensions and started production.
Here's the link if anyone is curious: http://www.amazon.com/dp/B00BR8PX6U/
I think the SD card slots are more useless than the stylus loop (I have a full sized wacom digitizer I plan to use so having a full size pen loop would be nice.)
I have two similar cases and find that one of the SD slots and the pen holder can be useful features;
I use the SD card slot to keep the SD card adapter that the mini SD card came with that's in the Note 8. I will probably never use it, but since I have it, I might as well keep it there.
I use the Pen loop to keep a normal sized S Pen. I don't like using the built in pen for two reasons:
1. Too skinny to be comfortable
2. I'm afraid that repeatedly pulling it in and out will loosen it to the point that I will lose it. At least that was my experience back in the Palm days. I want to keep the S Pen that the Note came with as a back up, but nothing more. Also, one of my cases (Moko) has the pen loop on the back, which doesn't interfere with IR.
I would also love to have a card holder pocket (instead or in addition to the SD card slots), so I could keep my work ID in it. (Where I work, the work badge/ID is used as a key to open doors and would work through the cover. Since I'm always carrying the Note 8, this would allow me to just hold up the Note 8 to open the lock instead of finishing my ID out of my pocket...
But I will probably switch to a thinner case that has none of the above features anyway, just to reduce the bulk... Or I might 'doctor' a slimmer case like the Poetic case and add the above.
Related
I've been looking for a case for my N1 that protects the screen from impact when I'm not using it. I've been using a cheap ebay leather case, which I've noticed a few issues with that I'd like the case I eventually use to not have:
1) The leather surrounding the screen interferes with things like pulling down the notification bar, or hitting buttons on the sides of the screen (q and p on the keyboard especially).
2) When the case is open, the top is open, so if I accidentally hold it upside down while using it, it literally just slips out. I've done this twice already this week - luckily onto carpet
3) The magnet interferes with the compass.
The best I've found so far is Proporta's Aluminium Lined Leather Case (I'd post a link, but new-user-restriction thing. It's pretty easy to find via proporta.com), but I've heard that it's a flimsy fit. And there's a bunch of other leather cases I've seen where I can't tell from the stock photos if there's a slip-out-able edge or not.
Any thoughts/suggestions? Any people with a case that just happens to meet the four criteria ?
I use this:
It's not exactly cheap, but it's built like a tank. I have one for my N900 too, six months and it didn't tear or anything. Sure it scratched a bit, but nothing major.
It doesn't cause me any problem with the screen, in fact I grip the phone in a fashion where the side of my hands touch the sides of the screen, causing all sorts of weird touch problems. With the case, I don't have any of these problems anymore.
You can slip it out if you want to, just push the bottom of the phone up and it'll come out, but not easily.
I'm a big fan of Krusell cases. The orbit is right up your alley. I've been using them osince the BB pearl first came out, and I wouldn't trust my phone to anything else. Leather is phenomenal quality, the front is removable if you like (or you can fold it backwards and it'll work as a kickstand) which combined with the multidapt kit gives you the option to use your phone in one singular case running, biking, driving, or just walking. It comes with a multitude of different style fittings and they all just simply click in and out.
Here's the case.
http://www.krusell.se/products/1/?catid=75&productid=3880
http://www.amazon.com/Krusell-Leath..._1_2?ie=UTF8&s=wireless&qid=1279693603&sr=8-2
And here's the things available for use with the multidapt system
http://www.amazon.com/s/qid=1279693...tidapt&rh=n:301185,k:krusell multidapt&page=1
Hope this helps in your search...I think you'll be hard-pressed to find a better quality more versatile case...though the one the other poster looks pretty good too, I must admit.
Hi everyone,
Post #1!
Some background info about me... I own a company that produces various software and hardware products for the diving industry (dive data trackers, underwater photography optics, marine life ID guides, etc.). As a result, over the years, we have acquired CNC machines and high-resolution 3D printing machines capable of making just about anything we can think of.
Recently, I picked up a Skyrocket (coming from an iPhone... wow, what a difference!), and an Otterbox Defender case for it. The case is robust, but is "just" a case... nothing more. So, over the past week, I drew up some 3D designs for my own case (similar to the Otterbox Defender), and produced it. The case consists of a 2-piece hard shell, screen protector, and a tough/grippy polyurethane rubber sleeve that protects the phone within the hard shell. The rubber sleeve that I made (via custom mold) is black, but I can make them any colour of the rainbow.
The dimensions and general vibe are basically the same as the Otterbox, so I thought to myself "where's the fun in this"? Duplicating designs is simple, but I want to take it to the next level. Here are some of the features that I am toying with:
-The capability to accept a 3800-3900mah extended battery, while still offering the protection of an Otterbox Defender (just ordered a few of these batteries, and will make a design immediately for them, since I'm pretty sure no one else has one on the market)
-A kickstand
-A slot for a credit card, bus pass, work ID, drivers license, or whatever
-A bottle opener
-A slide-out standard USB stick
-A magnifier which swivels over the camera to give better macro photography capability
OK, so some of these features might be a little useless, but I'm trying to come up with the ultimate case.
Attached are renders of the current design (the hard shell only, excluding the polyurethane rubber outer sleeve).
What would make a case ideal for you? Suggestions?
Thanks!
Keri Wilk
ReefNet.ca
Make it waterproof so I can take underwater HD videos while fishing
Wow! A slot for credit cards and ID is such a great idea! Perhaps taking measures to make sure that it's sand-proofed too. Then it would make a great case for taking to the beach or whatever. You have the potential to make alot of money off of this...hahaha.
Make a horizontal belt one that will fit the skyrocket with a siedo active case on it and you will have the market cornered. Even the ones that are out there now and claim to be the right size are not! A silk-like material lining the inside for better protection and extraction would help. Put a strong fastener on it (so it won't open until you want it to) and a finger hole in the botom (again to help with extraction) and it will be good.
ReefNet said:
-The capability to accept a 3800-3900mah extended battery, while still offering the protection of an Otterbox Defender (just ordered a few of these batteries, and will make a design immediately for them, since I'm pretty sure no one else has one on the market)
-A kickstand
-A slide-out standard USB stick
-A magnifier which swivels over the camera to give better macro photography capability
Click to expand...
Click to collapse
Produce these and I'm SURE your case will make some bank. Possibly even make different versions to target different groups too? Like, maybe not EVERYONE wants the bottle opener, or maybe not the magnifying glass. Idk. Just thinking some marketing.
Nice.
But I think you should keep it simple. A bulky case isn't necessarily a good case.
I like the idea of a kickstand and a USB stick, though. You know what would be cool? Make the case attach to the usb port and link the usb stick to the phone.
I would like something that you snap onto the a gps suction cup mount that had a flat piece that would just slide into the back of this phone. All you would have to do is slide it on. As long as the grip on the mount was firm enough you could move turn it on its side.
Case and car mount would be a big plus for me. I dont want to buy a cheap car mount or a car dock that I have to take my case off just to it.
iandr0idos said:
Nice.
But I think you should keep it simple. A bulky case isn't necessarily a good case.
I like the idea of a kickstand and a USB stick, though. You know what would be cool? Make the case attach to the usb port and link the usb stick to the phone.
Click to expand...
Click to collapse
i agree...something thin but sturdy, a kickstand is great. A magnifying glass would be awesome, for the usb, totally useless since the phone is already a thumbdrive. i would love a case that doesnt make my phone 2x thicker but still gives my drop protection. but the best feature would be a matching dock that would allow me to be connected to my power source and habe an extra jack to have a connection to my laptop...a little like the evo docks for gs2 i9100
scott14719 said:
Make a horizontal belt one that will fit the skyrocket with a siedo active case on it and you will have the market cornered.
Click to expand...
Click to collapse
I can definitely design a proper belt holder for the Seidio Active Cases, but is there even a market for them??
iandr0idos said:
Nice.
But I think you should keep it simple. A bulky case isn't necessarily a good case.
I like the idea of a kickstand and a USB stick, though. You know what would be cool? Make the case attach to the usb port and link the usb stick to the phone.
Click to expand...
Click to collapse
I agree that bulky cases are not the most popular, but the problem is that the small one-piece injection molded cases cost pennies to make when produced in the quantities that they are. so they can be sold for just a few dollars.
The manufacturing process that I'm using not meant for MASS production (my machines can produce around 5-10 cases this size per day), but is capable of producing things that is impossible by injection molding. I feel like the "skimpy" case market has already been saturated.
occupational_hazard said:
I would like something that you snap onto the a gps suction cup mount that had a flat piece that would just slide into the back of this phone. All you would have to do is slide it on. As long as the grip on the mount was firm enough you could move turn it on its side.
Case and car mount would be a big plus for me. I dont want to buy a cheap car mount or a car dock that I have to take my case off just to it.
Click to expand...
Click to collapse
Excellent suggestion! Thanks!
polish_pat said:
i agree...something thin but sturdy, a kickstand is great. A magnifying glass would be awesome, for the usb, totally useless since the phone is already a thumbdrive. i would love a case that doesnt make my phone 2x thicker but still gives my drop protection. but the best feature would be a matching dock that would allow me to be connected to my power source and habe an extra jack to have a connection to my laptop...a little like the evo docks for gs2 i9100
Click to expand...
Click to collapse
Don't you need a micro-usb/standard usb cable in order to use the phone as a thumbdrive? The idea would be that if you're away from home, you'll always have a universal usb stick with you to toss data onto. Then when you get home and have your cable handy, you can transfer the info to the phone/PC.
As for the dock with a splitter - have you seen the MHL adapters that are available? This cable does basically exactly what you're asking already - it is a micro-usb to HDMI cable, which has a second micro usb slot for connecting the phone's power source. Or am I missing your point? Here's a link to what I'm talking about:
[DOUBLE-U DOUBLE-U DOUBLE-U DOT] tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=1499515&CatId=5773
[I can't post links yet since I'm a new user... hopefully you can figure out the link above. Or just do a search for "MHL Adapter Samsung" and you should find several of them available]
Uncle Irish said:
Make it waterproof so I can take underwater HD videos while fishing
Click to expand...
Click to collapse
Aside from being a mechanical engineer, I'm actually an underwater photographer/videographer, so trust me, I'd LOVE to do this (and might just make one for myself...). But waterproofing a case would add a fair amount of bulk, and would require o-rings... not to mention that the plastic that I'm using is partially porous, so would let water diffuse through it eventually anyway. Thanks for the suggestion though!
This is all good stuff folks - keep the ideas coming!
Keri
Are you just planning on designing one case or do you plan to offer options.
The Lifecase for the iphone is a waterproof case. It's very thin and ads little to no extra bulk. It's actually thinner than most of the snap together hard cases on the market. It added about the thickness of a nickle to the overall bulk of the phone. Sitting next to an iphone in an otterbox, the waterproof case looked like an actual phone while the otterbox looked like a small black rubber brick.
This case would surely be the ultimate, I must admit!
I know that some people like those kind of cases, but I don't, I like the feel of the phone. I can't stand bulk, I wish more bumper-type cases were made.
I know this has really nothing to do with this phone but would you be willing to make cases for other phones. I'd be really interested if you'd be able to make one for my dhd .
Sent from my HTC Desire HD using xda premium
hey, def exactly looking for what you are making!
however the question for you is this:
what kind of cnc/manufacturing process would you use. The reason i ask is because a great sturdy case with the features you want would need to use different types of material (hard plastic and rubber mainly) fused together. as far as i am aware common cnc machines can only carve out of a single piece/material and then perhaps you can manually put it together...
this manufacturing works great if you want a case entirely made out of hard plastic but i tend to argue that a good protective and grippy case needs a combination of several soft and hard materials.
for example:
the inside would preferable be a hard rubber for shock absorption and grip to the unit itself. Same materials could be used for the edges.
The credit card holder would need ideally one side grippy the other sidy hard/smooth plastic so you can easily slide out the cards but they dont fall out by themselves (my speck iphone 4 case is an excellent example!
i have tried skinnier credit card cases for my iphone 4 but after prolonged use the clip that is supposed to keep the cards in looses its "push" and the cards will start to fall out. (this could be easily fixed by using better polycarbonate materials but would probably quadruple the price.
One of the biggest problems i face personally is the fact that when using a good skin there are no compatible docks yet.
i had the following combo on my iphone 4 and absolutely loved it with the only downside that i had to dremel out some of the case's bottom side to make it fit my car mout and iphone alarm clock.
Speck Products CandyShell Card Case
Magellan Premium Car Kit
Personally i would be willing to pay north of the $100 mark for a good combo like this and i am sure there many people wanting the same thing. given that this is a fairly new product there is still money to be made. my cad/catia experience is limited but maybe ill draw something up and see if you can manufacture it as a prototype.
gl phil
Cad file for case
Hello OP! I was wondering if you ever built a cad model of your case. We have a 3d printer at out facility too and I would love to try out your case design if you don't mind sharing it. I would of course be willing to pay what you see fit. Thanks!
UI would be fibbing if I said I am not totally interested. I would really like an otterbox style commuter case that has a kickstand, a card holder (I would stick my rfid bus pass in it). The rest sounds interesting but I am not sure I would want to add a lot of bulk.
I cannot wait to you a sales link and some good pictures of the final product.
Oh, dear. Kudos on the first case; it looks awesome. I've had my skyrocket for about a month or so now and I can not find a case that I like. The kickstand and credit card holder on the same case would make me pay $50-$100 for it. The only thing I would be worried about is my phone getting scratched up on the inside of the hard case, you should try adding in some sort of material like otter boxes have on the inside. And will you post a couple pics of how it looks on your phone with the outside rubber shell on it so we can get a feel of how it looks on your phone. Thanks and good luck bro.
I would be extremely interested in a case that fit my seidio extended battery with a kickstand and a place to put credit cards I would pay 50-100
TAPD on my Skyrocket using 2.0 beta
I think you design a case for people who still want a really thin phone but with like scratch protection like as thin as possible
I've been a follower here for many years now and I want to give thanks for those who have helped me and now I hope to return the favor to all of you. I purchased this Pro Clip mount for my 2013 Honda Accord when I had my note 3. Now that I have the note 4 I was able to use the same mount.
This was used with the Spigen Armor Case...( I LOVE IT)
The mount is a Generic (Adjustable) by adjusting the (2) screws you can move the sides in or move them out and then tighten them according to the Width of your phone.
Here are the part numbers for the mount and Clip which had to be purchased separately from Pro Clip. All together this ran me $86.00 for both parts
854820 Pro Clip Center Mount (This will Vary by Vehicle This was the one for my 2013 Honda Accord)
246827 Large Universal Adjustable Holder for Devices with a Case (THIS IS THE PHONE HOLDER)
Pro's:
1. Keep's Your eyes on the Road for GPS Navigation.
2. Keeps Your Phone Secure (In case of hard braking your phone won't fly across the car or dash.
Cons: Expensive $86.00 Total
Clip Without Phone
Top Angle
Phone in Mount
Top View
Side View
Side View. (DOES NOT AFFECT TURN INDICATOR KNOB)
Part Numbers
http://www.proclipusa.com/
Hope this Helps Guys:angel:
Brian
thanks for posting but that really doesn't look factory and in my car would never fly.. it has to be stock looking, no wires, no side clips..
Great review @kg6bki!
I've used Pro Clip for years and love them, best I've seen so far!
Nice write up but this has got to be the most expensive mount ever made.
Verizon N4 : Thank me if I helped ya
J3ff said:
thanks for posting but that really doesn't look factory and in my car would never fly.. it has to be stock looking, no wires, no side clips..
Click to expand...
Click to collapse
Good to know?
I thought about about Proclip, but the Kenu Airframe + has been working well for me. It's very small, unobtrusive, and holds my Note 4 with Spigen Slim Armor case. It's expensive for what it is (much less than Proclip), but I'm very happy with it. http://www.amazon.com/Kenu-Airframe-Car-Mount-Phablets/dp/B00LU5LWQK/ref=sr_1_1?s=wireless&ie=UTF8&qid=1414591766&sr=1-1&keywords=Kenu+Airframe%2B
I use the Mountek nGroove Snap that just has a magnet you can slip in your case that holds the phone like it's floating (I inserted the holder in the groove of my console but it'll also work with the cd slot. It has no issues holding my Note 4 with Slim Armor case: http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00MNXAFQ6/?tag=server7070f-20
Nice to see so many fans.
If anyone is interested in saving some money, I've been a ProClip reseller since I designed holsters for them for Palm and Windows Mobile phones. Just migrated here from Sprint with the Note 4 and my old 87214 adjustable still works as long as I don't put a thick case on the Note.
All I can tell you here is I can save you 10% since they have MAP's in place. But if you send me a PM I can do a little better. And any questions you have, feel free to ask. I'm also on ebay as crogs571 (god if anyone remembers that handle from pdaphonehome.com days where it all started.) Haven't created an auction for the Note 4 yet (or even the iPhone 6...gotta get hopping.)
This may be super particular, but has anyone found a wallet-style case that holds at least 2 credit cards (1 id 1 credit card), some cash, kicks up for media watching, AND has a full TPU-type housing on the inside of it? I don't care if it shows the "edge" or if it has a clasp. I've had a wallet case for my Note 4 that didn't have a full housing inside of it and the bezels were completely scratched because of that. I can't seem to find one with all of the specifications, they're all missing something
I ended up finding one!
http://www.amazon.com/gp/product/B00PYIBY3K/ref=gno_cart_title_1?ie=UTF8&psc=1&smid=A3VODXGBJ323R7
Has a TPU interior that covers the entire bezel, slots for money and cards, and pops up.
Now that I think about it...would it be possible to purchase a bumper case and use it with the official samsung flip wallet case?
With a little modification, I would assume so. That's what I did with my note 2. My edge will be here Saturday and oem wallet cover as well. As soon as I can get my hands on everything I'll report back.
awesome! looking forward to your report
gotzta said:
I ended up finding one!
http://www.amazon.com/gp/product/B00PYIBY3K/ref=gno_cart_title_1?ie=UTF8&psc=1&smid=A3VODXGBJ323R7
Has a TPU interior that covers the entire bezel, slots for money and cards, and pops up.
Click to expand...
Click to collapse
Ordered one from UK ebay and once you insert a couple of credit cards the flap does not close. Also occasionally the flap causes the front home button to be pressed which can switch on the Edge.
Can someone recommend a bike mount compatible note 4, preferably under 20$ ?
I bought this one from Ebay, but the phone fell twice. The mount itself is very sturdy, but phone grip is poor. Fortunately the phone was inside Samsung protective case, so no harm done.
Many bike mounts are not big enough for large phones like note 4, so looking for suggestion if anybody is using a good quality one, which can hold the phone securely even on bumpy roads.
I've been looking for one too, and there are options on Amazon, but I'm considering just fab-ing my own with some metal I've got lying around.
sonicdh said:
I've been looking for one too, and there are options on Amazon, but I'm considering just fab-ing my own with some metal I've got lying around.
Click to expand...
Click to collapse
Seidio:
http://www.seidioonline.com/hl4-holster-bike-mount-p/mb1-hl4.htm
But you'd have to be using one of their case/holster combinations, or get the holster for the caseless Note 4:
http://www.seidioonline.com/samsung-galaxy-note-4-spring-clip-holster-black-p/hlssgt4as.htm
and assuming you'd want the phone 'face out' you'd need to check that it can be secured in the holster that way round, as I believe these are designed for 'face in' usage.
Kinsman-UK said:
Seidio:
http://www.seidioonline.com/hl4-holster-bike-mount-p/mb1-hl4.htm
But you'd have to be using one of their case/holster combinations, or get the holster for the caseless Note 4:
http://www.seidioonline.com/samsung-galaxy-note-4-spring-clip-holster-black-p/hlssgt4as.htm
and assuming you'd want the phone 'face out' you'd need to check that it can be secured in the holster that way round, as I believe these are designed for 'face in' usage.
Click to expand...
Click to collapse
Seidio is pure garbage. I had their Convert case w/ belt clip holster and the holster detached from the belt clip at the slightest pressure falling to the ground. Seidio Customer Service stated it was due to the size of the N4, funny I have no such problems w/ my Otterbox Defender. The Convert case itself is pure garbage too, the rubber outercover that goes over the Surface case is designed so poorly designed every time you use the fingerprint scanner it moves off the lip of the phone & the composition of the way too soft rubber is a dirt/lint magnet.
As far as buying anything from Seidio's online store read the thread I started about it. Worst experience I've ever had by far purchasing anything online. I paid for the freight to send back my Convert Add On Kit & Seidio refunded zero so now I have to initiate a chargeback w/ the bank that issued the credit card used to pay for it. And that was after I jumped through all the hoops they require to return something and after they issued an RMA.
http://forum.xda-developers.com/note-4/accessories/dont-want-to-buy-seidios-webstore-t3036913
Seidio has pure garbage products & the worst imaginable customer treatment and hassle to try to return something.
I used this Arkon Mega Grip in my car for several years/phones (incl. N4) and they make a bike mount for it. I can't vouch for the bike mount but I can say the spring loaded Mega Grip arms do hold the phone securely & I would think the elastic bungee would make certain the phone stays on the mount. It will be cheaper on Amazon.
http://www.arkon.com/megagrip/megagrip-bike-mount.html
I use one of these on my motorcycle
http://www.slipgripcarmounts.com/
I have always used the German made Herbert Richter brand of car holders. They are well made and last forever though I have never used their bike mount
After trying couple of them from from Ebay, I decided to make one of my own using some plastic and parts salvaged from the ebay ones.
It looks a bit ugly but does its job.
suhridkhan said:
After trying couple of them from from Ebay, I decided to make one of my own using some plastic and parts salvaged from the ebay ones.
It looks a bit ugly but does its job.
Click to expand...
Click to collapse
Lol. Worlds first ever Bike Phaser! Hope its set to stun!!!
Seriously though that is awesome job dude. I'm thinking of making my own as well because all the other ones just don't look that safe to me for mountain biking.
Jammol said:
Lol. Worlds first ever Bike Phaser! Hope its set to stun!!!
Seriously though that is awesome job dude. I'm thinking of making my own as well because all the other ones just don't look that safe to me for mountain biking.
Click to expand...
Click to collapse
I didn't see it that way before, but now that you mentioned, it looks a lot something like that.
I feel a lot safer biking with this one. I dropped my phone twice with other commercial mounts.
although they have been sold out for a while, this one from amazon works really well. i've fallen off my road bike 3 times and it held up 100%. the case is easily detachable. and touch screen works well with the clear cover.
the only thing i wish it did, was to have a slot for the light sensor so that i can answer phone calls on speakerphone and not have the screen always go black. besides that, it's great.
I use this one:
http://www.amazon.com/GreatShield-Clip-Grip-Handlebar-BlackBerry-Smartphones/dp/B00FA892IS/
Don't ride a very rough route to work but have not had my phone fall out. I also have just a flip case on the phone.
Slip Grip is the best, I have used them since my Droid Incredible days. They are custom molded to each phone and each case available for it. If the case is not listed email them and they will let you know which one has the precise dimensions to fit like a glove.
Slip Grip Galaxy Note 4
Note: I am paranoid and still use a bit of velcro to double secure the phone when mountain biking.
Here is a pic of my setup
View attachment 3349789
I'm still looking for a better option
mlee0921 said:
although they have been sold out for a while, this one from amazon works really well. i've fallen off my road bike 3 times and it held up 100%. the case is easily detachable. and touch screen works well with the clear cover.
the only thing i wish it did, was to have a slot for the light sensor so that i can answer phone calls on speakerphone and not have the screen always go black. besides that, it's great.
Click to expand...
Click to collapse
I use my note with the samsung original protective cover http://www.amazon.com/Samsung-Galaxy-Note-Protective-Cover/dp/B00NP3K8Y2 and I'm looking for a better option than the ones I have (see below). The Ibera case seems large enough, but its still sold out and I can´t find in any of the amazon European locations - but it does seem like a very good option.
I have something like this, which works well, but ist as little on the tight side.
http://www.ebay.com/itm/Bicycle-Fro...amsung-/201295830059?var=&hash=item2ede2a9c2b
and recently bought this, but this case is tighter than the pannier bag, so I'll be selling it
http://www.ebay.com/itm/360-Waterpr...Phones-/181813369752?var=&hash=item2a54ebdb98
I use the topeak 6" drybag
http://www.topeak.com/products/bags/smartphone_drybag_6in_bk
Fully waterproof, allows use of the screen, power button and home button. Also allows me to keep my phone in the Spigen slim armour case inside the drybag. There are several fixing types available, I've got mine strapped to the stem with the fixing which came with the bag.
Been looking for similar products. Thanks for these product ideas!