Stock rooted 2.2, hboot 1.14, bootloader unlocked, S-Off, TWRP 2.3.3
I'm going to update to a newer ROM (Scott's CleanROM maybe, I like Sense) and I'd like to get the latest firmware and it seems that the easiest way to do that is to just run an RUU once rather than flashing multiple zips.
I've not run an RUU before so I'm a bit unclear what it does. I know it returns the phone to "stock" but some of the ancillary details aren't clear. Will it relock my bootloader? (Do I need to relock it before running the RUU?) Will it overwrite my recovery?
Should I run the latest RUU (3.18) before flashing a new ROM to get the lasted radios and other firmware? Or should I worry about that stuff after a new ROM? If I don't update the firmware and just flash a 4.1/4.2 ROM will that cause issues or instability?
No you don't need to relock sence you are s-off yes it will overwrite your recovery so after it is done you will need to fastboot a recovery with s-off you can run any ruu but I would recommend the newest one if you are going to run jb roms but you will need to downgrade your touchscreen firmware if you use aosp roms and older version of twrp there is a thread for that in original development
Sent from my HTC One X using Tapatalk 2
Related
Hi this is my first android phone, so I want to make sure I do this right.
Do I need to relock my bootloader after unlocking it to run 1.85 ruu?
If yes what am I actually upgrading in this step? If not, I can just flash 4.0.4/2.20 clean rom 4.5 after I have unlocked the bootloader?
Would the steps be like this?
1. 1 click change CID
2. Unlock from HTCdev
3. Flash TWRP recovery
4. Flash ROM?
Thanks!
Yep. If you're rooted then you have the right procedure. Skip 1.85
I believe that the only things that remain untouched by rooting, unlocking, and loading a custom rom are the radio (need to flash separately) and hboot (untouchable until we get s-off). (Someone correct me if I'm wrong here.)
I RUU'd to 1.82 when I unlocked but haven't done anything else since.
The newest roms incorporate the latest software versions. You don't want to update hboot to the latest version because they've change the security.
Thanks.
Should I flash the newer radio too? I can't seem to find it.
Rosen615 said:
Thanks.
Should I flash the newer radio too? I can't seem to find it.
Click to expand...
Click to collapse
Radios are here:
http://forum.xda-developers.com/showthread.php?t=1694012
I would start with the one that matches your rom. You may feel like experimenting with others, as people have reported different results with different combinations. I am using the 2.20 radio with a 2.23-based rom.
Hello All,
Sorry for my lack of knowledge. I've been searching for answers for quite some time but all was getting a bit vague. So I have to put my questions here.
1. I have HTC One S S4, 4.1.1 stock, HBOOT 2.15.0000, Rooted with bootloader unlocked, CID = BM_001 (Bell Mob Canada), Software No. 3.16.666.9, TWRP Recovery, made a backup of System and Boot using TWRP
*Rooted and bootloader unlocked using AIO Tool by Hasoon
Now I have some questions regarding stock and custom ROM flashing.
2. If I have to "unroot" or revert to stock ROM, do I have to do the following?
- Lock Bootloader
- Flash stock recovery (I suppose extracting it from the OTA zip?)
- Flash the OTA zip (I downloaded stock OTA_Ville_U_JB_45_S_BM_3.16.666.9_1.11.50.05.28_10.27.50.08L_release_308167fun0bzhoz2tch0mh.zip, there was no RUU for this carrier)
- OR flashing the firmware.img from the OTA zip?
I am all confused about how I will flash stock firmware as there is no RUU for Bell Mobility JB, just the OTA which is 600+ MB.
Will that be all?
3. Can I flash a Stock ROM other than BM?
- Is there an International carrier free version that I can flash?
- Any drawbacks of this process?
4. If I want to go with flashing a custom ROM, will I have to something further? E.g
- S-off
- SuperCID (Not possible with HBOOT 2.15)
5. Other than battery Issue, I believe there’s this Camera issue which don’t understand in particular. Is there no ROM which can provide the same Camera functionality as Stock? What’s the ROM that provides the closest functionality to that of the Stock?
khan.orak said:
Hello All,
Sorry for my lack of knowledge. I've been searching for answers for quite some time but all was getting a bit vague. So I have to put my questions here.
1. I have HTC One S S4, 4.1.1 stock, HBOOT 2.15.0000, Rooted with bootloader unlocked, CID = BM_001 (Bell Mob Canada), Software No. 3.16.666.9, TWRP Recovery, made a backup of System and Boot using TWRP
*Rooted and bootloader unlocked using AIO Tool by Hasoon
Now I have some questions regarding stock and custom ROM flashing.
2. If I have to "unroot" or revert to stock ROM, do I have to do the following?
- Lock Bootloader
- Flash stock recovery (I suppose extracting it from the OTA zip?)
- Flash the OTA zip (I downloaded stock OTA_Ville_U_JB_45_S_BM_3.16.666.9_1.11.50.05.28_10.27.50.08L_release_308167fun0bzhoz2tch0mh.zip, there was no RUU for this carrier)
- OR flashing the firmware.img from the OTA zip?
I am all confused about how I will flash stock firmware as there is no RUU for Bell Mobility JB, just the OTA which is 600+ MB.
Will that be all?
3. Can I flash a Stock ROM other than BM?
- Is there an International carrier free version that I can flash?
- Any drawbacks of this process?
4. If I want to go with flashing a custom ROM, will I have to something further? E.g
- S-off
- SuperCID (Not possible with HBOOT 2.15)
5. Other than battery Issue, I believe there’s this Camera issue which don’t understand in particular. Is there no ROM which can provide the same Camera functionality as Stock? What’s the ROM that provides the closest functionality to that of the Stock?
Click to expand...
Click to collapse
-you cant flash ota trough twrp, you have to wait for a ruu
(or get s-off, then you can flash older ruu and do normal ota trough stock rom)
first flash recovery then lock
your CID allows what you can flash + if no s-off you can go lower than your current state/hboot
for flashing only custom roms s-off of supercid is not needed, you might need an updated firmware for the new kernel on asop.
if you want only stock, there are also stock custom roms (with/without bloatware) that are recovery flashable
try facepalm or moonshine if you want soff.
real187 said:
-you cant flash ota trough twrp, you have to wait for a ruu
(or get s-off, then you can flash older ruu and do normal ota trough stock rom)
first flash recovery then lock
your CID allows what you can flash + if no s-off you can go lower than your current state/hboot
for flashing only custom roms s-off of supercid is not needed, you might need an updated firmware for the new kernel on asop.
if you want only stock, there are also stock custom roms (with/without bloatware) that are recovery flashable
try facepalm or moonshine if you want soff.
Click to expand...
Click to collapse
Thanks. Maybe S-Off is the last resort.
Hey guys i'm fairly new to the one x and i've done some reading, i've rooted, unlocked the bootloader and s-off i just have a couple of questions.
I see for aosp roms that you have to update the ruu to 3.18 how exactly do i do that? What would happen if i didn't update to the latest ruu and flashed the aosp rom anyway? I'm guess like status 7 recovery error?
and would the unlock, root and s-off stay? also, is it safe to ruu?
For aosp roms do you have to downgrade the touchpanel firmware?
Sorry for all the questions but coming from an s3 this stuff can get to be a lot and i just want to make sure i'm doing everything correctly.
y0yerrj0sh said:
Hey guys i'm fairly new to the one x and i've done some reading, i've rooted, unlocked the bootloader and s-off i just have a couple of questions.
I see for aosp roms that you have to update the ruu to 3.18 how exactly do i do that? What would happen if i didn't update to the latest ruu and flashed the aosp rom anyway? I'm guess like status 7 recovery error?
and would the unlock, root and s-off stay? also, is it safe to ruu?
For aosp roms do you have to downgrade the touchpanel firmware?
Sorry for all the questions but coming from an s3 this stuff can get to be a lot and i just want to make sure i'm doing everything correctly.
Click to expand...
Click to collapse
Download the 3.18 RUU here. Put your phone into fastboot mode and connect to pc. Run the exe file. It's that simple. Just make sure no other programs are running, and screen saver/hibernation are disabled. If you don't do the RUU first, the ROMs will not boot.
Your unlocked bootloader and s-off status will survive the process. You will just need to flash TWRP recovery again.
You don't need to downgrade your ts firmware for the latest aosp ROMs. If you want to run an older aosp ROM, then yes you do.
Sent from my Evita
ok so I have a ATT one x phone that I just RUUed to 2.20. I am successfully unlocked and rooted, twrp is installed and I am ready to flash a custom ROM. right now I am S-on.
Can I accept the OTA to 3.18 without consequence? should I S-off and then update? I would like the new firmware and radio and then just flash a custom jellybean ROM, or I can just do it manually afterward.
I have no problem just applying anew ROM but if I can get the newest radio/firmware first it would just save a few steps.
Don't take the OTA, you can't install an OTA on a modified device. Plus, even if it did work it would undo all the work you've done. The best way to update your firmware is via the 3.18 RUU, but you must get s-off first or you'll brick. So get s-off then run the RUU. Don't worry about relocking your bootloader, that isn't required. Once you've run the RUU just flash TWRP again and you'll be good to flash a ROM.
Sent from my Evita.
Its been a while since I've done anything on my AT&T HTC One. I'm still on 1.14 unlocked bootloader and an old ViperVL 3.2.2 Rom. I want to upgrade to Lollipop CM12 so I've done a lot of research and I wanted to make sure I'm doing it right before starting.
This is what I believe I need to do:
1. Update TWRP to v2.7.1.0 or higher to support new ROM
2. Get s-off in the bootloader using firewater
3. Once S-OFF is done, put phone in fastboot mode and run the RUU 3.18 JellyBean update (Its my understanding we need the JB bootloader for Lollipop custom ROM to work?)
4. Flash TWRP v2.7.1.0 back via fastboot
5. Go into recovery and flash New Rooted CM12 Rom
Before I start this method I also have a few questions:
1. Does my above steps seem right?
2. I'm having a hard time finding a working 3.18 RUU link. Most of the links on here are dead now. Is the RUU update a required step to jump from ViperXL 3.2 (bootloader v1.14) to Lollipop based roms? If its required, I found the OTA JB 3.18 update. Can I use the OTA version instead?
3. I've read that as long as the bootloader is already unlocked with S-OFF, I won't lose S-off or the unlocked bootloader from the RUU. Is this correct or will I need to unlock bootloader (Via HTC's dev site) and root again after using the JB RUU?
Thanks in advanced for the help with my questions.