I was wondering if anyone could post a guide for rogers users to flash custom roms since they are all based of att roms. I have read it involves changing the Super CID or something. Anyhelp would be appreciated.
Thanks
same here, need rogers guide for help
sm625614 said:
I was wondering if anyone could post a guide for rogers users to flash custom roms since they are all based of att roms. I have read it involves changing the Super CID or something. Anyhelp would be appreciated.
Thanks
Click to expand...
Click to collapse
it is recommended to change your CID to SuperCID, however, for rogers users we don't need to..since our bootloader is unlockable from htcdev straight.
for custom roms.
1. unlock your bl if you havent
2. flash the custom recovery image, cwm or trwp..
3. put ur custom roms in your internel sdcard, and go from there.
niceppl said:
it is recommended to change your CID to SuperCID, however, for rogers users we don't need to..since our bootloader is unlockable from htcdev straight.
for custom roms.
1. unlock your bl if you havent
2. flash the custom recovery image, cwm or trwp..
3. put ur custom roms in your internel sdcard, and go from there.
Click to expand...
Click to collapse
do we need to be on 1.85 ATT RUUs? if we want to use cleanroom 2.1
qiandongyq said:
do we need to be on 1.85 ATT RUUs? if we want to use cleanroom 2.1
Click to expand...
Click to collapse
yes, then you need to change to supercid and then relock your bootloader.
flash 1.85 ruu
unlock your bootloader
flash cwm
then flash cleanrom 2.1
niceppl said:
yes, then you need to change to supercid and then relock your bootloader.
flash 1.85 ruu
unlock your bootloader
flash cwm
then flash cleanrom 2.1
Click to expand...
Click to collapse
This is the part that is confusing...we do or do not need to have SuperCID? For one, I have been holding off on installing any of the custom ROMs as im not sure about this step. I've been unable to successfully get SuperCID on my rooted/unlocked/CWM installed Rogers HOX. Would love to try some of the new ROMs. A Rogers specific guide would be awesome. Anyone up to it?
rpritch said:
This is the part that is confusing...we do or do not need to have SuperCID? For one, I have been holding off on installing any of the custom ROMs as im not sure about this step. I've been unable to successfully get SuperCID on my rooted/unlocked/CWM installed Rogers HOX. Would love to try some of the new ROMs. A Rogers specific guide would be awesome. Anyone up to it?
Click to expand...
Click to collapse
I'm pretty sure you only need SuperCID if you plan on using any of the other region's RUUs.
I think that the normal CID should be fine for just flashing CWM ROMs
rohan32 said:
I'm pretty sure you only need SuperCID if you plan on using any of the other region's RUUs.
I think that the normal CID should be fine for just flashing CWM ROMs
Click to expand...
Click to collapse
That clears things up...So I just copy a ROM to the phone memory, enter CWM and select it?
rpritch said:
That clears things up...So I just copy a ROM to the phone memory, enter CWM and select it?
Click to expand...
Click to collapse
Read the top post of the ROM thread you want to flash. It will usually tell you if there are any extra steps.
In particular, some ROMs may require that your kernel be from a certain firmware version. For example, many of the ROMs right now are based on the 1.85 kernel. But you can often flash the newer kernel by pushing the boot.img for the custom ROM using fastboot. But it should say in the particular ROM thread you are looking at.
This should help: http://forum.xda-developers.com/showthread.php?t=1676869
kilo89 said:
This should help: http://forum.xda-developers.com/showthread.php?t=1676869
Click to expand...
Click to collapse
This is what I was following...the instruction include installing SuperCID, which I have been unable to do.
rpritch said:
This is what I was following...the instruction include installing SuperCID, which I have been unable to do.
Click to expand...
Click to collapse
What ROM do you want to flash? CleanROM 2.2 and Xi40 now have flashable boot images (boot.img). So no need to update to 1.85 first.
Sweet...gonna give it a try!
I know with Hboot 1.13, I can't flash radio in recovery. I've heard I've to do supercid or relock the phone to RUU or somethings like that?
Could ne1 kinda give me any information or links on how to do it step by step?
Thanks
1. Do that SuperCID thing
2. Go to Recovery, install the 1.74 ( I think ) RUU
Your phone will be re-locked now and be pretty much vanilla.
3. Install 2.12 Update
4. Unlock again
5. Have fun
http://forum.xda-developers.com/showthread.php?t=1671643
I just found the relative thread of how to do supercid on One S. After doing supercid... I have to go to recovery mode and run the 1.78 RUU? and OTA to 2.21? After all, Unlock it again and root.
My Question is do I need to flash stock recovery, stock boot and relock bootloader myself before run the 1.78 RUU?
Did you try to root the 2.21 RUU?
After installing 2.21 RUU, I've unlocked my bootloader, reinstalled CWM recovery, rooted my phone (everything was on that thread http://forum.xda-developers.com/showthread.php?t=1583427) and reinstalled my CM10 backup (without forgetting to flash boot.img via fastboot) and everything is OK!
Thanks everyone. I just successfully updated my radio with 2.21 RUU now. After that, I unlocked my bootloader again and install clockwork recovery and SU.
I just flashed trickdroid V7.1, everything works great. Actually, the procedure isn't difficult but extremely troublesome ... damn the HTC doesn't give us S-Off.
I don't remember, but will booting into recovery allow you to flash radio without flashing the ruu first. Don't know if cwr or twrp would be better for that. It worked on kernels, I believe, as the htc restrictions did not then apply.
It depends on your actual hboot, since 1.13 hboot you can't directly flash radio throught recovery and you have to install the latest RUU but if you are still on an older hboot you can flash the radio via CWM or TWRP (follow this thread http://forum.xda-developers.com/showthread.php?t=1684477).
I am familiar with that link and have used it. As I am on .06 hboot I have no issues flashing radios.
Was just trying to determine for others if that method would work on .13 and higher and why not. I personally am not 100% sure if it will or will not--
Since I have not seen any posts on doing that, it probably won't--not sure
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor. Currently service provider is Koodo - a division of Telus (in Canada).
CID: ROGER001
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
arjundas86 said:
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor.
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
Click to expand...
Click to collapse
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
LS.xD said:
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
Click to expand...
Click to collapse
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
arjundas86 said:
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
Click to expand...
Click to collapse
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
LS.xD said:
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
Click to expand...
Click to collapse
Thanks for the toolkit.
cid: ROGER001
Btw, what's the purpose of going SuperCID?
Also, I don't want to install lower hboot. I am on hboot 1.08 and I think I need to install hboot 2.15. Right?
I guess S-OFF isn't absolutely necessary, but would be nice to have. Would you recommend using the S-OFF command from the toolkit you linked?
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
With superCID you can switch to other CIDs e.g. for unbranding your device Also it's needed for "Facepalm S-OFF" (Was the only working method for me)
Sent from my loved HTC One S using (most time buggy) Tapatalk
LS.xD said:
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29
I would appreciate any insights into what would be the applicable RUU?
Thanks.
arjundas86 said:
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29
I would appreciate any insights into what would be the applicable RUU?
Thanks.
Click to expand...
Click to collapse
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
LS.xD said:
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
Click to expand...
Click to collapse
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
arjundas86 said:
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
Click to expand...
Click to collapse
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
LS.xD said:
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
Click to expand...
Click to collapse
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
arjundas86 said:
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
Click to expand...
Click to collapse
To run a RUU NOT MATCHING your stock CID you need S-OFF // SuperCID. You cant install TMobile RUU at first :/
I would act like this:
Run latest Rogers RUU --> READ FACEPALM GUIDE CAREFULLY. There is how to gain SuperCID and then S-OFF. Once done you can change CID to whatever you want and run a (unbranded) RUU with HBoot 2.15.
But that is just what i thought about it. I suggest to let someone else CONFIRM the way suggested by me first.
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
@Rapier
thank you for the provided help as usual
Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
LS.xD said:
...Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
Click to expand...
Click to collapse
For you? NO. You're better than me
The story is like this. I bought the phone in 2012. At that time, the highest hboot was 1.14 I believe (don't remember exactly) and there was no S-Off method available (they appeared later). There was something else tho. The lower hboots (1.09 and lower) permitted to write in the kernel partition or radio partition like an S-Off device. HTC then covered this in the higher hboots. So even if there was no S-Off method, there was a downgrade method that was used to downgrade the hboot from whatever you had to 1.09 or below. I downgraded mine to 1.06...don't ask why I didn't choose 1.09, I thought that was the RUU I considered to be fine for me at that time.
Now being on hboot 1.06 I can do anything except I cannot flash firmwares directly. So I cannot flash a new hboot with red letters removed for example. But I don't care about this...I can flash radios or kernels or splash screens like any S-Off user. The procedure for getting latest firmware and S-Off seems a little bit risky and I've read about alot of issues or problems from people who failed or tried countless times to reach that. So I've asked myself why should I do that if I don't need it?
Then it came the rumor and there were some brick cases of devices that were having some Android 4.3 ROMs and were not on latest firmware (in the meantime 2.13 and 2.15 hboots arise and also the S-Off method). It proved to be not the firmware fault after all. But CM team has included a check in the updater script of the ROM ZIP, to validate if the hboot was 2.13 or 2.15...if not, the flash won't happen. It's a simple assert command present there at the beginning of the script that do the check. As CM team was the pioneer in having the newest Android version ROMs available, everybody based initially their ROMs/builds on CM...so the check in the script was automatically carried over to all the ROMs out there. And it's still here.
As I've tested and I could run fine those ROM's (by removing the check before flash), I noticed that this requirement does not apply to everyone. Some could run fine the ROMs even if they're not on the "latest" firmware.
So that's why I am on 1.06...cause I don't know why should I go through some risky procedures when I don't need to.
Rapier said:
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
Click to expand...
Click to collapse
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
Rapier said:
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
Click to expand...
Click to collapse
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
LS.xD said:
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
Just IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
Click to expand...
Click to collapse
Yes, you're right. That's what I meant. I will delete the updater-script lines that Rapier mentioned before trying to install CM11.
If it doesn't work, at least I can restore to my backup, without risk of bricking.
Then I can try the hboot update and s-off if required.
Thanks.
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444....
Click to expand...
Click to collapse
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't want
arjundas86 said:
...I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
It's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
BUT, if you're NOT going to upgrade your firmware and you'll be lucky to have the ROM working, you won't need to S-Off since your current hboot is lower than 1.09 and allows you to flash radios and kernels directly from recovery.
And at this point, as you said, it worth a try like you are now and only if it's not working like this you should upgrade and do S-Off. I guess is much easier and less risky to remove 4 lines from that script and flash the ROM to see if it's working, than to go through the firmware upgrade & S-Off procedures
Rapier said:
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't wantIt's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
Click to expand...
Click to collapse
Hey Rapier,
I'm having trouble doing getting the zip signed.
I tried the zip signer you had in your guide, as well as a bunch of other zip signing programs, but none of them seem to do the job. I keep getting Error: Status 7.
Not getting bootloops or anything like that, so I was able to restore to my backup. No harm done.