Related
free photo hosting
photo sharing sites
New Jelly Bean update for QMobile Noir A10 (14-03-2013)
Guys ! The Auto Rotate Issue Has Been Fixed in Jelly Bean Rom u Can Download it from the following link.
Download Link: QMobile_A10_JellyBean_Update(13-03-2013).zip
Update Features:
Auto Rotate Issue Fixed
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
How to install:
DO AT YOUR OWN RISK!!!
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
Old ROM Link
Download Link: QMobile_A10_JellyBean_Rom.zip
Features:
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
Bugs:
Auto Rotate Not Working....
How to install:
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
All the info shared here comes from my blog here http://qmobilea10.blogspot.com
Sent from my A10 using Tapatalk 2
Your instructions are a bit wrong.
For this tool to work, the device needs to be detectable in ADB (you can check by typing 'adb devices' in command prompt).
If you follow STEP 5, this won't be possible and the rooting process won't be able to start.
Step 5 needs to be ignored. You need to put the device into USB Storage mode for this process to work.
bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
i have already root my a10 and come to xda post the mathod and find ur post u already done as i buy this phone some days before u posted the method for macromax a110 the same spec every t same as qmobile noir a10 and thx for it em happi tht peoples working this kinda stuf in pakistan and i need som devolper who devolp sum custom roooms for a10 and micromax as well..
for noir 10 follow my post..
fisrt of all thx brother for ur post follow 1st post of bahiwala
1 download the file Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging(as it should be enabled but check it if u disabled it...)
3.. just ignore tht driver download step and install QMobilePCTool its provided in cd wid box install it and connect ur phone with usb cable and dropdown the notification bar and select the connect 2 media storage if its a usb storage then leave it now open ur QMobilePCTool and then choice ur devic click on refresh now a10 comes up selct it and install the drivers for a10..
4..extraxt the Root_with_Restore_by_Bin4ry_v15.7z with winrar aur 7 zip u like then run the file runme.bat and type 1 from keyboard and entr it
and then follow the instuction for restore and phone must be restart atleast 2 tyme..... and its done now youre rooted
Why we need 2 rooot we can instaal custum rooms backup the orignal stock room and over clock the processor and use sum apps like screenshot apps for take the screeen shot and etc enjoy msg me if any problem......
can we run jelly bean on QMobile Noia A-10
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???
Farri i dnt think so tht we can yeah in a way we can update it as we if flash custum room of jely bean it will take some tyme but i think we dnt have radio framw as 4.0 custum rooms when i flash one its work grat sum extra animation goood battry more battry bakup more fast but my signals was vaishd sooo i restore my stock room sooo the problm is radio as this rooot mathod is for micromax in india they use 3g network mostly and there frequency are not same like pakistan as i googled it sooo tht make signal go ad i seaching for a long tyme for radio but em not able 2 find there is sym light for 4.1 but sum problems...........................
Any custom rom for qmobile noir a6?
Sent from my Qmobile A6 using xda app-developers app
Any way to install custom rom on Qmobile A2?
Hi.. I want to ask some questions.. If I only root my my phone nd do not install clockward mode.. then can i unroot my phone? and it will be unrooted as like was original?
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
When u root ur phone it displays two options, one is root and second option is to unroot ur device. Even after installing cwm u can revert back to stock recovery anytime.
Sent from my Micromax Canvas 2 using Tapatalk 2
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
farri613 said:
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???
Click to expand...
Click to collapse
No update yet for our qmobile a10. But there is a jelly bean update on the way for micromax a110.
Sent from my Micromax Canvas 2 using Tapatalk 2
gps
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
salluhassan said:
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...
Click to expand...
Click to collapse
Bro!
t first time GPS fix takes some time. Try it with all options selected under location settings
Sent from my Nexus 7 using Tapatalk HD
Stock rom
bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
CAN YOU PLEASE PROVIDE ME WITH THE STOCK ROM (cwm backup) I HAVE MESSED UP MY CAMERA AND REALLY NEED THE STOCK ROM
Can somebody please upload the stock backup files so that i can restore from it(my phone is messed up) or please upload your "system" folder pleae
System.img and nandroid.md5 required, please upload these files, get from gscript or cwm backup
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*
well now i dont need the full backup, please anybody just go into your system folder and inside there is "lib" folder. I just need the lib folder please
---------- Post added at 02:26 PM ---------- Previous post was at 02:14 PM ----------
shantam said:
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*
Click to expand...
Click to collapse
bro i want to remain on stock qmobile, would you be kind enough to use root browser to navigate to your system folder and then share your "lib" folder
"system\lib" it is required to bring my camera to life
please
Need help please
I have problem in step 4
When i extract the Root_with_Restore_by_Bin4ry_v15.7z and run cmd command open and when i select 1 the problem occurred says " THE SYSTEM CANNOT FIND THE PATH SPECIFIED"
PLEASE HELP ME
i try every possible way to work this out but it couldn't i even install pdanet but still didnt work.
I need a possible solution that where did i go wrong.
Thanks
Jelly Bean Update for QMobile Noir A10
Good News for all Qmobile A10 users!!
Jelly Bean Update is available for QMobile Noir A10. Link added in first post.
Download from first Post & update your phone.:good::good:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2
kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.
sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.
kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2
Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956
Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT
violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery
Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!
Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.
Hi Guys,
Here i share Root/Unroot and Stock Rom about Micromax A110Q how to root Canvas Plus. So i just share, what i learnt about this phone.This thread will be updated when updates are available........
All replies of this forum's should be posted here..
Also if anyone copy this thread's information should be credited to this thread.
I have got many Pm, that i can't root my mobile, so I checked the problem n the result is because of memory issue in v 2 can't root by both of methods.so who wants to use root, kindly downgrade to firmware v 1.
Micromax A110Q Canvas Plus Root by Bin4ry_V30 root tool. The Rooting procedure is really easy, and you should follow these steps: -
1) Rooting & Unrooting
First of all install Driver Micromax A116 Driver then follow these steps:-
1. Enable USB debugging on your device.
2. Go to Settings-- > Development-- > USB debugging check it.
3. Connect MMX A110Q using storage mode to PC & Install driver.
4. Stop Firewall & Antivirus During root process.
5. Change phone connection to Media device.
6. Download Tools -:- Root_with_Restore_by_Bin4ry_v30 thanks to link provider
7. Unzip Bin4ry the root tool.
8. Run RunMe.bat file (Do not Run as Administrator)
9. Follow the on screen instructions carefully. You will need to type "1" for root and press enter.
10. If you ever want to Unroot your Micromax A110 then type "x" and press enter.
11. Your device will reboot during the process,after the reboot Bin4ry will copy some files to your device. Now you have fully rooted your device.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
2) Only for rooting (Auto Root Method)
Thanks to John
What should U do:
1) Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging,
2) Download AND Install MTK Drivers,
3) Extract the MTK6589 Auto Root folder from the .rar,
4) Connect your phone to PC visa USB and changa it into (MTP) mode.(USB) mode Won't work,
5) Run run.bat from the extracted MTK6589 Auto Root folder,
6) Press any key and wait while it roots your phone,
7) After finished, now reboot,
Wow, you’re rooted now.
Note = This method will work for all of MTK6589 Quadcore phones....
Do it at Your OWN Risk
Stock Rom V2
This is first update of Micromax A110Q Canvas 2 Plus. Micromax release stock Rom V2 for this phone. This update comes in software & improves hardware performance of Micromax A110Q Canvas 2 Plus.
Software release notes:
1. Quadband support, software is also backward compatible with dual band.
2. M! Live app, Hoops, Game hub, Kingston office suite applications are integrated in software.
3. New SAR values (Basis on Quadband) are integrated in software.
4. GMS is updated.
Hardware release notes:
1. Quadband hardware is introduced so Hardware version will be changed. Please share the new labels with new SAR values and new HW ver.
2. TP (BYD) is changed. BYD make is introduced.
3. Front camera (Sunwin) is changed. Sunwin make is introduced.
Follow these steps to Install stock Rom V2:-
1. Install Drivers (driver in your phone)
2. Download and Extract SP tool & Micromax Stock Rom V2 folder. Open Sp Tool folder and click & Rum sptool.exe Run as Administrator if you are using Windows vista/7/8
3. Select ' MT6589_Android_scatter_emmc.txt file inside the ROM folder.
4. Now Switch off Canvas 2 Plus.
5. Click Download Button in Sp tool.
6. Connect Phone {Switched off} to PC via USB Cable.
7. If every things right, flashing will precede
8. Wait till it finishes….. A green ring is displayed on completion.
9. Now Close SP tool….. Remove Phone from PC.
10. Switch ON the phone...It is successfully Flashed...
Note: I am not responsible if you make Mistakes and Bricked Devices.
Thanks to Abhishek.Sharma
Downloads ROM
Tool for flashing = Download Here
Stock V2 = Download Here
Rooting tools
Tool for Root & Unroot (1st Method) = Download Here
Tool = Download Here
Driver For Both Methods = Download Here
Custom Roms for A110Q
1) LEWO ROM
2)MIUI
3)SGalaxy
4)Xperia Fusion
5)Color Os Rom
6)Xtreme Rom
Tutorials For A110Q
1)Increasing System Partition
2)Increasing Extra Ram in A110Q
3)Increasing Apps Storage Partition In Mediatek Devices
4)Permanent Solution Of IMEI In A110Q
Bro,This is A110 Forum not A110Q one...This should be At Miscellouns Android Development for now
what r the new SAR VALUES of a110q after quadband update ???
lavadepa said:
Micromax A110Q Canvas Plus Root by Bin4ry_V30 root tool. The Rooting procedure is really easy, and you should follow these steps: -
Thanks to Abhishek.Sharma
Click to expand...
Click to collapse
who is "Abhishek.Sharma" ???
hariraj96 said:
who is "Abhishek.Sharma" ???
Click to expand...
Click to collapse
i have micromax canvas2 plus and i flashed canxperia rom on it which was a custom rom for micromax canvas 2 , i flashed it through recovery and then the device went in to the bootloop. i tried to flash the stock jellybean rom through sp flash tool but when i connect the mobile it starts and again starts bootlooping so sp flashtool couldnt flash the stock rom even. phone can boot into recovery and fastboot and device battery is below 20% so is there any other way to flash the stock rom so that the device can boot in proper way, please let me know as soon as possible.
hariraj96 said:
who is "Abhishek.Sharma" ???
Click to expand...
Click to collapse
exactly!
who is Abhishek Sharma? and where is official source link that MMX has released stock v2. I called up service center and they said there is no OS update for c2+.
be careful about who u trust on internet.
badshah.mb said:
exactly!
who is Abhishek Sharma? and where is official source link that MMX has released stock v2. I called up service center and they said there is no OS update for c2+.
be careful about who u trust on internet.
Click to expand...
Click to collapse
For more details about Abshik sharma Go here
it's unofficial bro if u want u can test......
hey....guyzz i had built a xperia z themed rom for mmx a110q so for that i need some beta testers so intresred people can private message me for the link:good:
Ok friend send the link I ll test
Sent from my Micromax A110Q using Tapatalk 4 Beta
had someone rooted there phone using this method??? and is there any prove that this method works??:good:
Ya I got rooted of AUTO root method
Sent from my Micromax A110Q using Tapatalk 4
1st method is asking for system restoration when i click on it .it says starting system restoration and nothing happens
and in 2nd method iam getting and error that su/xbin dont have free space does any one knows the solution??
getting thiss error
J.E.abhishek kumar said:
getting thiss error
Click to expand...
Click to collapse
Then try this just take backup of ur current rom,then do Full format & then try second method.the first method didn't work for me but some people got worked so I didn't remove that method from my thread
Sent from my Micromax A110Q using Tapatalk 4
lavadepa said:
Then try this just take backup of ur current rom,then do Full format & then try second method.the first method didn't work for me but some people got worked so I didn't remove that method from my thread
Sent from my Micromax A110Q using Tapatalk 4
Click to expand...
Click to collapse
still not working and now iam thibking of flashing v1 again so the method mentioned for v2 is same for v1 as well??
J.E.abhishek kumar said:
still not working and now iam thibking of flashing v1 again so the method mentioned for v2 is same for v1 as well??
Click to expand...
Click to collapse
Ya the same method for v1 also best of luck
Sent from my Micromax A110Q using Tapatalk 4
thxx...a lot i had flashed v1 successfully and rooted as well
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
http://d-h.st/K6W
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED Must link to the main thread.
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Is It Safe to Flash CWM Recovery ON Canvas Magnus Is It Really Tested I have A Canvas Magnus and I want to Install CWM recovery on it.
sayan8 said:
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
Mod Edit Link Removed
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED - Untested recovery
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Click to expand...
Click to collapse
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Minimilised_MR said:
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Click to expand...
Click to collapse
Hey Bro i didnt copied -_-.
Thread Re-opened
Thread temporarily closed pending XDA investigation.
Thread re-opened. Rom download link re-established.
Links removed for Framawork.apk, as the link should be directed to the apk's XDA thread by the original author.
Especially for the CWM Recovery that the OP has not been tested. If the recovery was not compiled using all correct fstabs, the result will be a corrupted/damaged partition, and possibly a perma-bricked device.
MD
I am also looking for stock rom and stock recovery. How to take back up of these??
So i can go ahead and install cwm and root
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed. Release
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed.
Release note: Integrated ‘foneclay’ in the software.
https://www.adrive.com/public/UvawHB/S9204P_MP_IN_MMX_18_FLASHER_USER.rar
Please support me by hitting the THANKS BUTTON for me
Please regular update forum.....
Sent from my Samsung Galaxy S4 Mini GT-I9505 using XDA Premium 4 mobile app
Check below link for All in One Guide for Canvas Magnus. Regularly updated
http://forum.xda-developers.com/showthread.php?p=48466519
http://forum.xda-developers.com/showthread.php?t=2569049
Q&A for Micromax Unite 2 Root and Custom Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Micromax Unite 2 lock screen app misbehaving after root
Sudeep Duhoon said:
Don't mix this guide with some other as i will not help in that case.
First of all, use read back to get rom dump (backup) as there is no stock rom available on net.
Go here and follow the guide.
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download and copy/move KingUser to your memory card. (Fix provided by sagarwep:op)
3. Download any kitkat recovery from here and place it in pc.
4. Open SP Flash tools and load this MT6582_Android_scatter.txt in it. (alternative download link of sp flash tools)
5. Click on 'recovery' in sp flash tools and select the downloaded Recovery .
6. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
7. Insert battery and press volume up+down+power on, then press volume up to select recovery.
Note: in ctr recovery you can swipe right to go forward and swipe back to go backward, use it to navigate, save volume buttons.
8. Tap on install from sd card and swipe right on screen to go forward, select Unite_2_4.4.2_Proper root......zip and say yes to flash.
9. Reboot, Done.
In case any one wants working MTK droid tools, here or here
Please subscribe, rate and like this thread.
Any problem, ask in fb group or pm me on facebook.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've rooted my Micromax Unite 2 as per your root guide line, just after finishing root my lock screen app started misbehaving. after I restart my phone it first shows me the launcher and then after approx 20-30 seconds it shows lock screen. also I see an error message every time it boots which says that the process "system" is not responding -> kill or wait, choosing kill restores the normal phone function until next restart. restoring my backup of stock rom fixes the problem. could you please guide me how to solve this problem?
Not working
I did every single step correctly but idk why its showing no root access on my unite2 ...
then i tried rooting through mtk droid tools n im getting this error
ERROR:file abdb not install
the file isn't chosen
PLEASEEE HELP ... what to do
recovery mode problem
hey,
i have downgraded my micromax a106 to jeallybean of myphone aqua rio lite. now my recovery mode option is not working. on choosing recovery mode phone doesn't entering to recovery mode and it is booting to desktop. my phone is rooted. please help how to fix this
mmx unite 2 sd card mount/detect issue
Have recently bought micromax unite A106 june 2014 through flipkart. unable to detect/ mount external sd card .
tried with different sd cards which are working well in other phones.
Kindly help !!
Rooting Micromax unite 2- Problems
Hi Sudeep Duhoon,
I tried to root the Micromax Unite 2 using the software you have listed and followed the process to the T using the CTR 2..2 as recovery of choice.
1 When i try to activate the Root Explorer option on it gives me message"Sorry Test Failed, This feature can not run on your device"
2 When I connectbot i still get the $ sign in root
Please help.
Sadanand
Micromax Unite 2 Root and Custom Recover
Hi Sudeep ,
I had use the Tools and Rom given you to Root my Micromax Unite 2 . I had followed all the processes as shown.
Later on today When I tried to install Titanium It asked for SU Permission and It failed to get access and further message is its not rooted.
please help......
Use King Root ... 100 % success
Sent from my Micromax A106 using xda app-developers app
micromax unite 2 root
sir im unable to root my micromax unite 2. sp flash tools shows nothing n phone shows nothing but pc recognizes my device. developer is on plz help me
I want to upgrade to kit kat from jelly bean (mmx a106), but want to have flip to mute functionality of jelly bean
Can anyone guide me step by step for above 2 questions please
Sent from my Micromax Unite 2 using XDA Free mobile app
No command screen
I am using micromax unite 2
when i go to recovery mode i can see a no command screen... whenever i do something. any solution?
Recover Not Working Micromax Unite 2 After Flashing Stock Rom Of Android One?????
I have flashed rom of Micromax Canvas A1 on my Micromax Unite 2 By useing SP Flash tools. I thought it will work since both has almosh same specification (MTK 6582). And I will get new version of android on my Micromax Unite 2. Now my phone is not working. It is not even detected by SP flash tools. Otherwise i would have flashed the stock rom of my phone on it to make it work. Please help me with some guite by which i can recover my device.
Rooting Issue
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
HELP PLZ
pmt changed for the rom it must be downloaded
what to do now plz help me guys
tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Presuming you are referring to error in sp flash tool while flashing :
1)If you are flashing same Rom (jb to jb or kk to kk) then that means the partitions are changed, if you have changed ebrs then restore them first, then the error will go
2)if you are flashing jb to kk or kk to jb then use format all & download option.
---------- Post added at 12:12 PM ---------- Previous post was at 11:42 AM ----------
Sumit Mandal said:
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
Click to expand...
Click to collapse
Use any custom recovery and flash koushik datta's superuser zip for rooting (he is the founder of cwm) to root your a106
tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Thnks sir now my device is successfully rooted
Root Micromax Canvas 4
In the 5th step you said :
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
But I have to backup my Micromax Canvas 4 [ A210 ]. What numbers should I enter there ?
Please tell me asap. Or any other link or post about Canvas 4 [ A210 ]
Thanks in advance.
this error is coming bro
PMT changed for the ROM; it must be downloaded
Rooting Micromax Unite 2
Hello Guys I followed Sudeep Duhoon and was successfull in installing TWRP custom Recovery and flashing superuser [it installed as system app and I wonder how to remove it now!!!], but still my phone doesn't seem rooted as Root Checker app says "This device doesnt have proper root access". I want to root this anyway please help.
No emmc backup
Hello. I have a wiko bloom (same phone as micromax unite 2 and myphonerio lite), I have flashed TWRP on kitkat, I couldn´t use the scatter file provided in the post so I used the one that I had from my phone. Once I flashed the recovery, I tried to backup my phone, but I have an error saying Error: couldn´t mount /emmc
I have looked for that folder with root explorer but there is no /eemc folder but some files intead (like [email protected], [email protected])
Before trying anything by myself I would like to know it there is any way to fix that. I would like to install roms and that things but I´m not sure they would work if the architecture of the software is not the same :/
TThank you in advance