[Q] Touch screen not working after software upgrade - LG Optimus 3D

I have an LG P920 and after I tried out the official 4.04 (installed with LG flashtools) and after the upgrade (which was a success) my touch screen is not working.
I tried the following instructions:
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1942836
I eve tried this one: http://forum.xda-developers.com/showthread.php?t=1629307
It is common that I was able to do the recoveries as they are in the guides, so all three recovery attempts was successful, but after the first boot the touchscreen was not working with any version. For the last time I used LG Mobile Phone Update tool and used phone recovery mode to get back the official SW version for my IMEI. The process was a success, my phone recovered to the original SW version, but the touch screen is still not working.
If someone has an idea what to do or try it, it would be highly appreciated.
MOD: because there is no answer yet I just ask: it is possible that some software elements which are not part of the upgrading or recovering image is the reason why my touch screen is not working? For example the bootloader or the recovery or fastboot, or anything? Maybe there is a part of the phone which is not recovered properly, but I just guessing.
Dchard

Re:
I tried out latest CM10 with ICS bootloader and recovery, the installation was a success, the CM10 boots up fine, but the touchscreen is still not working...
I really exhausted all my options, did all the recovery and resurrection guides, all of it was a success but my touch screen is still not working.
Dchard

dchard said:
I tried out latest CM10 with ICS bootloader and recovery, the installation was a success, the CM10 boots up fine, but the touchscreen is still not working...
I really exhausted all my options, did all the recovery and resurrection guides, all of it was a success but my touch screen is still not working.
Dchard
Click to expand...
Click to collapse
Your display isn't working whatever you do, right?
Maybe it's the obvious.
I mean if all of your flashing was a success than there must be a hardware problem.
I hope I'm wrong...
Try ressurection guide to go back to GB and if that doesn't work...
Money=new display
Ediy:
The cheapest digitizer on ebay is 17$ so it's not that much as a last resort.
www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=lg+p920+digitizer&_sop=15
Sent from my LG-P920 using xda app-developers app

jocazmaj said:
Try ressurection guide to go back to GB and if that doesn't work...
Click to expand...
Click to collapse
I'am doing it the second time but now after successfully flashing V21E and after that using V21E recovery (as in the guide) I got constant bootloop (LG logo), and I cannot get it out from bootloop with flashing the same V21E to it the third and forth time. I know bootloop means reflash the device but I don't think this is going to solve the problem.

Factory reset.
Sent from my LG-P925g using xda app-developers app

xbsall said:
Factory reset.
Sent from my LG-P925g using xda app-developers app
Click to expand...
Click to collapse
Did that too still bootlooping.
MOD: I did everything according to your guide, all of the steps were done successfully, but after it, there is only bootloop and the recovery is not accessible either.
MOD2: it is interesting because I tried to install several GB versions beside the v21E and it seems all of it has the same bootloop issue after flashing. If I put up an ICS variant like CM10 or one of the official roms (with ICS bootloader) they all boot up but the touchscreen is not working even with the official ROMs.
Dchard

Here I have the same problem. No touch screen on ICS.
To downgrade to GB I had to flash a corean froyo v10g .bat first. For example w.ww.wuala.com/Xafalo/LG%20P92...est%20Bin.rar
After I flashed v21e, all OK.
I updated with the oficial LG software and all was successful to install ICS, but my touch screen is not working...
Additionaly, in the TWRP recovery on ICS bootloader, the touch screen is not working
Josemi

simply a duplicate touch change your touch....

I have identical problem. No touch screen. I try a new glass digitizer touch screen, but no work. My lg is not for sale

look
dchard said:
I have an LG P920 and after I tried out the official 4.04 (installed with LG flashtools) and after the upgrade (which was a success) my touch screen is not working.
I tried the following instructions:
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1942836
I eve tried this one: http://forum.xda-developers.com/showthread.php?t=1629307
It is common that I was able to do the recoveries as they are in the guides, so all three recovery attempts was successful, but after the first boot the touchscreen was not working with any version. For the last time I used LG Mobile Phone Update tool and used phone recovery mode to get back the official SW version for my IMEI. The process was a success, my phone recovered to the original SW version, but the touch screen is still not working.
If someone has an idea what to do or try it, it would be highly appreciated.
MOD: because there is no answer yet I just ask: it is possible that some software elements which are not part of the upgrading or recovering image is the reason why my touch screen is not working? For example the bootloader or the recovery or fastboot, or anything? Maybe there is a part of the phone which is not recovered properly, but I just guessing.
Dchard
Click to expand...
Click to collapse
Try to flash this rom
with the same tools in this Thread http://forum.xda-developers.com/showthread.php?t=2337545

Related

[Q] Touchscreen dead [A700]

Hope someone can help please, i have been using the Iconian rom since release and everything has been fine, i have been running on the unlocked a700 ics bootloader, today i tried to be to darn smart and flashed the iconian firmware update (to jellybean bootloader) now the a700 reboots but my touchscreen is dead. ive tried restoring my nandroid backup but it does nothing and the jb bootloader is still showing and touchscreen still dead. help please.
oxide32 said:
Hope someone can help please, i have been using the Iconian rom since release and everything has been fine, i have been running on the unlocked a700 ics bootloader, today i tried to be to darn smart and flashed the iconian firmware update (to jellybean bootloader) now the a700 reboots but my touchscreen is dead. ive tried restoring my nandroid backup but it does nothing and the jb bootloader is still showing and touchscreen still dead. help please.
Click to expand...
Click to collapse
i'd just flash the official firmware for JB via sd card.
If that fails to fix the screen see if any points work as it may be the touch bug where it needs a large amount of force to acknowledge anything till you go > sett > display > touch sensetivity > high
oxide32 said:
Hope someone can help please, i have been using the Iconian rom since release and everything has been fine, i have been running on the unlocked a700 ics bootloader, today i tried to be to darn smart and flashed the iconian firmware update (to jellybean bootloader) now the a700 reboots but my touchscreen is dead. ive tried restoring my nandroid backup but it does nothing and the jb bootloader is still showing and touchscreen still dead. help please.
Click to expand...
Click to collapse
I updated to 2.0 and flashed the new firmware....All went well for me. Maybe flash the whole thing again? Possibly do a wipe?
Thanks for taking time to look all, I changed from cwm touch to non touch and reflashed the iconian firmware and upon reboot it showed updating ebt . not sure why it made a difference but its now working again. Thanks again all.

[Q] DaFu* did I just do? ( I Bet I divided by Zero )

OK LG P925. Custom ROM ICS 4.0.3 It was Korean
Went to downgrade because of the camera and could not
connect to T-mobile reliably.
Boot in to recovery wiped dalvic cache and installed
Said It went fine and now this:
Any Suggestions?
have you tryed some Un-Brick Guides http://forum.xda-developers.com/showthread.php?t=1942836 It may work (i am no Dev)
sorry for my bad English /Sioxz
That looks like the firmware/emergency mode. Are you getting booted straight into it constantly? If so, try the LG support tool recovery, that should repair all the damage tho after flashing you might need to do a factory reset in the settings as well (if it nags about no space available)
A week ago i had the same problem LG P920. Custom ROM ICS 4.0.3 It was Korean, I've try all the guide that there is on Xda but none it helped me, So i fix it with LG flash tools update , i update my phone and now its back to normal as it was before everything works great.

[Q] Custom ROM always bricking

Hi there, I have been trying for countless hours to make a custom ROM work on my P920 with no results, always some issues. I've managed to brick my phone in different ways a billion times now, then spent billion hours unbricking it and in the end I'm always back to where I started. I would really love some help please.
My phone is P920.
The android version I'm running is: 2.3.5
Kernel version: 2.6.35.7+
Software version: V21E
Rooting method: megatron
Now I would like a ROM that uses Android 4 and that can still use the 3D features such as 3D camera, the ROM calledthe Darkroom International would be an example I imagine.
While that's one of the ROMs that I would want, I've tried many, and always encountering issues, let me clarify.
First of all my device has to be rooted and since SuperOneClick doesn't work for me as it gets stuck on step 7, I use megatron which works well. I even double check if my phone is rooted with the Root Checker from the Android store. Now according to the guides I've read I need a custom recovery system, so I install Clockworkmod. I then place the ROM on the SD card, in the recovery menu I delete cache, that other cache, format it, format system, data, everything those guides tell me to. Afterwards, I install the ROM by selecting the zip and then I reboot. I've tried like 3 different ROMs, jellybem, cyanogenmod and some other. Yes I know none of them support 3D features - I didn't know at the time. Anyway, the issue was always the same, right after the LG logo there would be a screen with some weird colors showing the display of what happened before the phone crashed. Before it crashed? Yes, the phone would actually boot into the ROM but only for a few minutes, crashing afterwards. The next time I would boot, it would show that weird screen with those fancy colors with what happened just before it crashed. So I followed some steps and I got back to the original 2.3.5 ROM, everything back to normal.
I tried doing some more research and I came across the Darkroom Intentional ROM which had a bit different instructions. It asked me to install TWRP recovery with a bootloader, so I did, successfully, then did all the clean cache etc, installed ROM, bam, wouldn't boot at all. Oh boy have I had issues here, I couldn't even get it back to the default 2.3.5 stock ROM because my phone wasn't even recognized in the device manager. So I did some more research, found a solution, managed to flash back to 2.3.5 stock and I'm back to square one.
Now, could someone please help and explain to me what exactly have I done wrong and how I can make it right? I've spent countless hours now trying to install a custom ROM with no success. Sorry about the long read. If you need me to supply some more information please let me know. Thank you.
First of all if u want to use an ICS ROM then u need to update to ICS FIRST u can't flash it directly from 2.3.5 u can use xbsalls thread to update......
Next if cm based Roms are crashing then u need to flash bootloaders which means u should use os_hacking tool to flash ICS bootladers if u wanna update
Or flash GB bootloaders
So first update if u want
Root
Flash bootloaders
Flash recovery
Flash Roms
Sent from my Nexus 4 using xda app-developers app

[Q] How to de-brick rooted P5110 that keeps rebooting after startup animation (boot)

As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Do you have nandroid backup(one that you make with cwm)? If yes go to backup and restore in cwm and hit restore....if not try to reflash rom via cwm or flash stock rom via odin in dowload mode.
emmc is.... http://www.simmtester.com/page/news/showpubnews.asp?num=181
Starojitski said:
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Click to expand...
Click to collapse
If you have nandroid backup.. Just restore it.. Or else download a stock firmware and flash it via odin.. gud luck:good:
flash another rom !!
mythi said:
flash another rom !!
Click to expand...
Click to collapse
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Flash via Odin any stock ROM then root it and flash whatever you like.
This kind of brick may occur easily if you have flashed uncompatible kernel or tried to restore nandroid backup of another ROM or made by uncompatible CWM recovery version.
Sent from my GT-P5110 using XDA Premium HD app
Solved?
dartd27 said:
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Click to expand...
Click to collapse
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
tetakpatak said:
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
Click to expand...
Click to collapse
Thank you for the reply. I had posted a link in here that linked to my thread that explained what i had done and used but it didnt show up for some reason? Anyway I used the below roms(in bold). An update was available for JB and we own two tablets both the P5113 and bought at the same time. One tablet updated fine but the other one would download the package but then would keep failing to install it. So i did a factory reset on the device and then that's when the fun began and it started booting strange.
So I first tried flashing the official JB rom using ODin 3.04.
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
and it still did the same thing so then i tried flashing it back to ICS which is the rom that was on there i think. (It was ICS but not sure if that was the exact version number?)
P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
Im sure the roms are going on there fine as if im not mistaken ICS has a blue battery charge icon and JB a gold one. I noticed that it went from blue to gold when i first loaded the 4.1.1 on there and then back to blue when i put ICS back on there.
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
I tried it anyway and it didnt work
dartd27 said:
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
Click to expand...
Click to collapse
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
tetakpatak said:
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
Click to expand...
Click to collapse
I hear you Its a paper weight right now though so thought id rather try as nothing else is doing the trick.
The tablets are my kids so i preferred to just give them an official stock version. I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics. I now run stock jelly bean on my GS2 but even that has crappy battery life, lucky for it to make it till 4pm and still be on and thats with moderate use. Couple of phone calls and a few text messages and a tiny bit or browsing. I know what is causing it though as it only starts to lose battery when im not on wi fi. It at least doesnt freeze and stop receiving phone calls altogether like PA did though. I used to miss a ton of work calls because the phone had actually frozen.
I love Apex though. I have Apex pro on my GS2 and its much better then the standard launcher. My daughter has the GS3 and it still does not rotate on the home and app screens which i find annoying.
dartd27 said:
I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics.
Click to expand...
Click to collapse
I've got your point, mate. :good:
Same with me: I need all the functions to work. The CM10.1 does it really, but my p5110 is wifi-only device so I'm not sure if CM10.1 is same good for your p5113. CM10.2 seems to be smooth and fast, but many apps aren't yet updated for 4.3 so I will wait a while before I flash it again.
I have cm10.1 on my p5113...it runs amazing...the p5113 owners most of the time have to flash the p5110 version because there is nothing different with the tabs besides the ir port..
Sent from my GT-P5110 using xda app-developers app
help me
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
obeye said:
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
Click to expand...
Click to collapse
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
tetakpatak said:
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
Click to expand...
Click to collapse
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
obeye said:
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
Click to expand...
Click to collapse
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
tetakpatak said:
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
Click to expand...
Click to collapse
Thanks mate!
already done!!
its work!
thank you so much!!
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
Great, I am glad to hear it did charger cable trick help?
Just to make sure: you must be sure to flash a stock ROM first (not JB based custom ROM), after it you will have revived Tab without root. After that normal proceeding: root it, install CWM recovery or custom kernel that fits your ROM (or even whole custom ROM) which already features the CWM recovery.
The stock recovery (3e) checks the signature so of course you can't flash any custom zips. CWM recovery has an option "toggle signature verification" where one can disable signature check. Then you can flash whatever you want, just take care that all you ever flash must be absolutely compatible for your device.
---------- Post added at 03:45 PM ---------- Previous post was at 03:21 PM ----------
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
One more thing mate, look at this video which I've posted on YouTube last January:
http://www.youtube.com/watch?v=0NXBN9Z63TY
It describes how to get rid of the signature verification problem. For the reason that quite many people don't understand english well, I have made a speechless video added by step by step description in the text (video description) so people can just copy the text and paste it into their translators.
If one ROM that you have flashed bootloops on the logo just try another ROM. It happens sometimes. Important is that you should always before flashing another ROM make full wipe: (data/factory reset/cache/dalvik) in your recovery mode.
Did you do it?
Please let me know if you were successful, it should work now! Good luck :fingers-crossed:
It works!
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
After that i rooted it again, installed another recovery and now have the latest stock rom working perfectly.
For those who get the same problem and the tabled keeps rebooting - just plug it into recharger and keep the on/off button until it turns off. Then you can fully charge it before you attempt to flash rom.
Once again, thanks a lot!
PS. now i am considering installing CM10.1
Starojitski said:
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
PS. now i am considering installing CM10.1
Click to expand...
Click to collapse
Great! Congratulations
Yes, install CM10.1.1 with gapps for 4.2.2 it works great, all the functions. Just mind that you can not restore nandroid backups made with other kernel, (sometimes also not if done with older CWM recovery version) and also apps backups made by Titanium backups in older systems aren't good idea to restore once you upgrade to CM10x
If you want to return for any reason to your old (current) ROM, do the same procedure like by unbricking

[Q] Boot loop

Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!
First install ICS V30A baseband use this video (you may need to go in to the stock recovery after flashing and do a factory reset is a problem arises during flashing)
https://www.youtube.com/watch?v=FqC5qw6WRaY&feature=youtube_gdata_player
secound install WKparts bootloader and TWRP you can use a tool om this forum named simple tool can be found here everything you need is in the tool
https://www.dropbox.com/sh/p959msww1ol04s4/BUlrkRLEs7
and then load a rom on to the external SD card and flash it in TWRP or CWM touch i recomend
http://forum.xda-developers.com/showthread.php?t=2164367
if you want the newest CM although it's a bit more hassle with this 4.2.2 pacman rom as you need to delete the first line in updater script for it to work properly on ICS
@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.
@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.
This what I have flashed:
Kernel-versie
3.0.21-CM+
CyanogenMod versie
10-20130908-NIGHTLY-p920
Build datum
Sun Sep 8 11:42:08 PDT 2013
Buil-nummer
cm-920-userdebug 4.1.2 JZO54K eng.
jenkins.20130908.114141 test-keys
i don't know where you can flash only the base band but the V30A haves baseband in it and it makes to that you have to flash the custom bootloader which works really good (can boot anything)
You can flash baseband with LG Flash Tool.
drastic00 said:
You can flash baseband with LG Flash Tool.
Click to expand...
Click to collapse
Can you please tell me how, step-by-step. I've read some tutorials here but they are so not easy to read because they always use so many different colors and fonts it becomes hard for me to understand what they are saying.
Mine is about as clear and detailed as you will find
http://forum.xda-developers.com/showthread.php?t=2195753
CyanogenMod NIGHTLY-p920 unstable
Gilbertvanhaasen said:
Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!
Click to expand...
Click to collapse
CyanogenMod NIGHTLY-p920 unstable .
look & flash this rom http://forum.xda-developers.com/showthread.php?t=2337545

Categories

Resources