[Q] DaFu* did I just do? ( I Bet I divided by Zero ) - LG Optimus 3D

OK LG P925. Custom ROM ICS 4.0.3 It was Korean
Went to downgrade because of the camera and could not
connect to T-mobile reliably.
Boot in to recovery wiped dalvic cache and installed
Said It went fine and now this:
Any Suggestions?

have you tryed some Un-Brick Guides http://forum.xda-developers.com/showthread.php?t=1942836 It may work (i am no Dev)
sorry for my bad English /Sioxz

That looks like the firmware/emergency mode. Are you getting booted straight into it constantly? If so, try the LG support tool recovery, that should repair all the damage tho after flashing you might need to do a factory reset in the settings as well (if it nags about no space available)

A week ago i had the same problem LG P920. Custom ROM ICS 4.0.3 It was Korean, I've try all the guide that there is on Xda but none it helped me, So i fix it with LG flash tools update , i update my phone and now its back to normal as it was before everything works great.

Related

Optimus 3D SU-760 Users (Pls. Contribute Here) Upgrading, Rooting, etc

Hi!
(Mods, please correct me if this thread must not be placed here.)
My motive is to gain people to help us with this Korean Device. I'm located in the Philippines (I'm a Filipino) and bought the unit with a Korean Friend. I spent hours of searching the net hoping to avail help from developers. I found only few. Most of them in Korean/Chinese language translated using Google translator.
Its been several months now since i bought this, I'm still enjoying my phone despite of it being different (atleast for me who lives in the Philippines and in XDA-Community), compared to P920 who are in this forum. I struggled from upgrading it from Froyo (2.2) to Gingerbread (2.3.5 v20e), believe me, my fingers are crossed when i have the guts to update it, for i couldn't manage to fix it in case it bricked. I Really envy guys who uses P920, they have all the resources from great people here in this forum.
If you are a User of this phone or atleast know something how to upgrade or develop it for the benefit of us noob people (atleast me). Please help a user like me by posting your contribution here.
My contributions: (Problems and the help i found)
If you have a better solutions, please contribute. These are based on my noob experience, please don't laugh at me..
1. Upgrading
There was a thread here who used P920 flash for their SU760, it bricked their phone. I dont know if it was unbricked, how he did that? thats why we need a thread like this. In english.. he he..
As for me, I used the official LG Software Update Agent. It worked like a charm. As a precaution, i backed up all my data, but to my surprise after the upgrade, All programs remained intact! That was from Froyo 2.2 to Gingerbread 2.3.5 v20C...
I have to admit, for me, the 2.2 runs faster and had few problems as a comparison to the 2.3.5. Last week, a Root worked for the v20C, so i Rooted mine. Too exited noob as i was, i accidentally uninstalled minor system app. This drive me to update again using LG Software Update Agent again. And it did! now my software version is 2.3.5 v20e, official software.
If anyone who has a better experience than this or who has an upgraded software than i have, please help me.
2. Rooting
As i mentioned, A week ago, from korean/chinese site (i almost learned their language! lol!) they said in the past they were not successful in rooting v20c or v20e. The Rooting software was capable of rooting v20C and v20E (among others)
The Post for SU-760 came from here.
http://bbs.gfan.com/android-3717040-1-1.html
but then soon, i read from xda developers that it came from this Author
http://vulnfactory.org/blog/2012/02/26/rooting-the-lg-thrill-optimus-3d/
3. 80 Character SMS
This is what drives me crazy about this phone. In my usage, it only sends 80 Characters not the standard 160. I must limit my SMS to 80 characters or else, the message will be broken. I used Go SMS in this setting. I learned that Korean system uses 2 bits compared to our single bit, that's why it only sends 80.
Handset SMS miraculously solved this problem. (i wish it will be the same with GoSMS)
4. Stock Aps
These are killing the RAM usage! This what motivated me to root my device in the first place, and what drove me to accidentally remove system apps. I used the System App Remover to remove them. Maybe Ill use other app next time.
TV w/ Antenna
It never worked here, I also tried it in Manila (the major city in the Philippines), did'nt worked. I wonder if anyone managed to make this work!
Someone Please Help Me:
How to put/upgrade to a custom rom. (So i will be freed from stock apps)
How to Upgrade or Change Baseband. I really dont know much about this but i have a feeling i need to match it for Philippine usage. I wish to have an H instead of 3g connection. a Getril app didnt worked as of the time i posted this. I emailed the author, if i get help, ill post it here.
So far, these are the major issues I encountered, ill just add later if i have more time and recalled some more problem i fixed.
My helps came from Korean and Chinese forum, the translation is very very hard to understand! If there are Korean / Chinese people in this forum who could help us, please do so, atleast in English Language please.
hey dude! you can root official V20E ,right now no rom better than official V20E for poor LG SU760.
@tiger
hey dude! you can root official V20E ,right now no rom better than official V20E for poor LG SU760.
Thanks... yap, i was able to root the official 20E.. pity my SU760.. i wish there would be more user of this phone to surface around this thread..
tiger, you are from china... is there any cooked rom you could recommend just to free myself from the logo and other pre installed app of the "T mobile?"
Thanks alot for posting, atleast im not alone (using SU760) in the universe of XDA-Developers.
LG su760 upgrade 2.2 to 2.3
hi, i'm rasel from bangladesh, using lg su760 for about 3 months. my firmware ver is 2.2. its came from south korea, its sk telecom.
i want to upgrade to 2.3, but i dont know what to do.
there is 2 way. one is lg support tool via pc. other is via wifi through my handset.
which is better i dont know. is 2.3 better for my su760?
rasel
01680063556
I have an issue with SMS and restart phone
Sir Im a Filipino, have an SU760,
My problem is even i use Go SMS or Handcent, my text only limits to 80 to 100 characters only, what should I do?
Second problem is my phone always automatically restart/reboot itself. this happen 1-3 times a day.
PLEASE HELP ME WITH THIS ISSUE. THANKSOMUCH
raselahmed said:
hi, i'm rasel from bangladesh, using lg su760 for about 3 months. my firmware ver is 2.2. its came from south korea, its sk telecom.
i want to upgrade to 2.3, but i dont know what to do.
there is 2 way. one is lg support tool via pc. other is via wifi through my handset.
which is better i dont know. is 2.3 better for my su760?
rasel
01680063556
Click to expand...
Click to collapse
-rasel..
i used the software from lg tool via windows pc when i upgraded my phone. the software checked the phone version then downloaded the latest software automatically installed it.. just make sure to install all the proper drivers in doing it.
thanks..
sellingsumthing said:
Sir Im a Filipino, have an SU760,
My problem is even i use Go SMS or Handcent, my text only limits to 80 to 100 characters only, what should I do?
Second problem is my phone always automatically restart/reboot itself. this happen 1-3 times a day.
PLEASE HELP ME WITH THIS ISSUE. THANKSOMUCH
Click to expand...
Click to collapse
-selling...
about the messaging.. what telecom are you using? try to use Smart telecom, and use handset. i hope it will resolve the problem.
about the automatic start/reboot. this should not happen.. Please try to upgrade to the latest version available for the SU760. Im a hard user of the unit, mine dont restart, (by saying hard, i mean, using GPS, 3G and bluetooth at the same time. my unit gets really hot, i got used to it.. but never restart)
Hello all,
I recently asked a friend to get an optimus 3d from china , he got it for me but it was not p920 but SU760 , i dont care really but when i inserted my dutch sim card the network signal was coming and going often , also the phone was already rooted with clockworkmod rom i tried to reset the phone y going into privacy > delete all data > but clockwork mod rom was still there and the signal was coming and going , so i connected my device into recovery mode to hard reset to latest stock firmware using recovery phone option using samsung tool.
It downloaded 430 mb file and installed the firmware and said completed , but when i powered on the phone i got LG logo and later T world logo like the logo which is on the back pannel and colours changing all the time like a pattern and it was like that for 30 - 40 mins later the screen went lack but all there buttons at the bottom , home entrer and options were illuminated .... no android OS .....
I? tried to recover the phone again via LG software but did not help same result , i am really seperate to get the phone working as it's my first android phone in my life , i really wanted to use it but now i cannot ....
also on all over the internet they talk about o3d p920 and not 03d su760 ...
Please can someone tell me where to find su760 stock firmware and how do i flash it to the lg phone ,,, i cannot even enter hard reset mode using volume key combination and home and power button ,,, seems phone is stuck in a cycle .... please HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!
xbsall and I worked really hard to get it up and running over teamviwer session but still even after flashing for 5 times still t world logo with orange screen ....
Suhail
suhailpuri said:
Hello all,
I recently asked a friend to get an optimus 3d from china , he got it for me but it was not p920 but SU760 , i dont care really but when i inserted my dutch sim card the network signal was coming and going often , also the phone was already rooted with clockworkmod rom i tried to reset the phone y going into privacy > delete all data > but clockwork mod rom was still there and the signal was coming and going , so i connected my device into recovery mode to hard reset to latest stock firmware using recovery phone option using samsung tool.
It downloaded 430 mb file and installed the firmware and said completed , but when i powered on the phone i got LG logo and later T world logo like the logo which is on the back pannel and colours changing all the time like a pattern and it was like that for 30 - 40 mins later the screen went lack but all there buttons at the bottom , home entrer and options were illuminated .... no android OS .....
I? tried to recover the phone again via LG software but did not help same result , i am really seperate to get the phone working as it's my first android phone in my life , i really wanted to use it but now i cannot ....
also on all over the internet they talk about o3d p920 and not 03d su760 ...
Please can someone tell me where to find su760 stock firmware and how do i flash it to the lg phone ,,, i cannot even enter hard reset mode using volume key combination and home and power button ,,, seems phone is stuck in a cycle .... please HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!
xbsall and I worked really hard to get it up and running over teamviwer session but still even after flashing for 5 times still t world logo with orange screen ....
Suhail[/QUOTE
Hi,you need to wipe your phone after recover your phone
Click to expand...
Click to collapse
How to get to the Service Menu? I want to set SMSC and activate 3G.
*#*#4636#*#* doesn't work, dials instead of showing Service Menu
How to root SU-760 and what preinstalled T-labeled software could be removed without spoiling the overall perfomance?
lg su760
hi there i m a silent user of XDA ......well i m using LG su760 Korean version from last three months and i have come to know that these mobile sets are hard to understand...i m android user from last 3 years and the first thing i do with my android mobile is to root it and that i have done with the lg su760...
initially i have 2.2.2 which i manage to root with superoneclick root method and i also manage to delete the stock applications regarding T-logo....with ROOT TOOLS software.....now i have updated to 2.3.5 v21f stock and also rooted with megatron method...and again mange to delete T-logo apps now my lg su760 is rooted and have CWM recovery image installed 5.0.2.7 but unfortunately spending several hours on net i wont get any custom rom for this set.....if anyone knows plz tell me
aliwa said:
hi there i m a silent user of XDA ......well i m using LG su760 Korean version from last three months and i have come to know that these mobile sets are hard to understand...i m android user from last 3 years and the first thing i do with my android mobile is to root it and that i have done with the lg su760...
initially i have 2.2.2 which i manage to root with superoneclick root method and i also manage to delete the stock applications regarding T-logo....with ROOT TOOLS software.....now i have updated to 2.3.5 v21f stock and also rooted with megatron method...and again mange to delete T-logo apps now my lg su760 is rooted and have CWM recovery image installed 5.0.2.7 but unfortunately spending several hours on net i wont get any custom rom for this set.....if anyone knows plz tell me
Click to expand...
Click to collapse
Can you guide me as well on this? how to root it and get rid of T mobiles n all PLEASE?
Its not working for me the rooting process, can someone guide me on the roms as well that can be used on this mobile? :crying:
LGSU760
Theri0n said:
How to get to the Service Menu? I want to set SMSC and activate 3G.
*#*#4636#*#* doesn't work, dials instead of showing Service Menu
Click to expand...
Click to collapse
Dear All, I also Have same problem, But I Have something else also, I can able to control the no service issue by using v10L-00.kdz which is LG P920 rom for Swisscom you can download it from lg-phone-firmware.com/index.php?id_mod=2 , after this all things working except internal memory card is not showing, it gives format option but cant format it, It is also change my IMEI No, But at least in working condition
LGSU760 All Problems Solved
datamanonline said:
Dear All, I also Have same problem, But I Have something else also, I can able to control the no service issue by using v10L-00.kdz which is LG P920 rom for Swisscom you can download it from lg-phone-firmware.com/index.php?id_mod=2 , after this all things working except internal memory card is not showing, it gives format option but cant format it, It is also change my IMEI No, But at least in working condition
Click to expand...
Click to collapse
Alhamdulillah ( Very Very Thanks To Our Almighty God)
I Got it, After V10L I Tried V20F it is still working all things, Then I Try V30b of Original SU760 it hangs on T logo of SK Telecom , Then I extract the V30b and install it again via Smart flash Tool, Then every thing works Fine, Internal Memory is automatically correct
Thanks Again to Almighty God,
---------- Post added at 06:01 AM ---------- Previous post was at 05:57 AM ----------
Theri0n said:
How to get to the Service Menu? I want to set SMSC and activate 3G.
*#*#4636#*#* doesn't work, dials instead of showing Service Menu
Click to expand...
Click to collapse
Dear All, I also Have same problem, But I Have something else also, I can able to control the no service issue by using v10L-00.kdz which is LG P920 rom for Swisscom you can download it from { lg-phone-firmware.com/index.php?id_mod=2} , after this all things working except internal memory card is not showing, it gives format option but cant format it, It is also change my IMEI No, But at least in working condition
Alhamdulillah ( Very Very Thanks To Our Almighty God)
I Got it, After V10L I Tried V20F it is still working all things, Then I Try V30b of Original SU760 it hangs on T logo of SK Telecom , Then I extract the V30b and install it again via Smart flash Tool, Then every thing works Fine, Internal Memory is automatically correct
Thanks Again to Almighty God,
Good to know
Hi All you Guys,
Heres my experience..
Jump Start
As you see I'm also from Philippines too and just had this Device as gift for my Wife almost a month ago (its around my budget that time and its 3D). I got it first using GB and I just updated it using V30B.kdz that I found floating around the web - Here (if you happen to cant download it you can use any proxy known to man to by pass limitations) using LG Flashtool (pretty much automagically and easy) - Here. Back then my Wife is as happy as child. But all has its limit. After update my Wife noticed performance issues, lagging and too much wait times. So I decided to root it using - This but be sure to use v1.6 and to open it use 7zip app for Windows (Google it). After Rooting first off to do was to Install Busybox and try out V6supercharger, w/c eventually made progress and made the phone quite snappy. No problems, redraws and slowdowns encountered from my Wife except that I cant stop to look at the Custom Roms available for SU760 and personally I still think its still too slow from a device having good Dualcore CPU and decent GPU.
Customization
Reviewed a while, talked to some people and downloaded necessary tools and apps. Target was to flash XBSAv5.2 - Here (yes this works on our SU760). First I got many Bricks and Bootloops but able to resurrect my device using this guide - Here and then found out that it would be safe and easier having the x-loader and u-boot made by wkpark, download this (the loaders were inside /files and /resigned, but if you have trouble locating those you could try this pack - Here) and follow this Guide and use this recovery Pesach85 gave me - Here. After all those stuffs I finally able to boot at recovery anytime during bootup, simply press Vol Down while on the Silver LG Logo boot screen and it will launch TWRP, from there you could flash XBSA v5.2 and if you want to try PH85 Kernel on SU760 download this version Pesach85 gave me - Here. Final touch was to apply the build.prop patch located at XBSA ROM's OP and to use the Original V30B Camera - Here. Thats all I did on my O3D SU760 and now somehow it became fast enough having Camera load for just 5 seconds.
Note: My Wife's setup is
Launcher: Go Launcher
Locker: Go Locker
Sms: Go SMS
Social Apps: Facebook, FB Messenger, Tweeter, YouTube
Settings: 3G when needed, WiFi at Home, All Social Apps Notifier ON, All Sync are ON
She get those setup and ask me why her phone slows down.. Tsk women..
Internal SD Card memory is still working after flashing XBSA v5.2 rom?
My experience was not good with that rom so I never tried again even after 30B official upgrade.
hackenggr said:
Internal SD Card memory is still working after flashing XBSA v5.2 rom?
My experience was not good with that rom so I never tried again even after 30B official upgrade.
Click to expand...
Click to collapse
Yes its working. So far I got good results with that ROM + PH85 Kernel. Just remember to flash wkspark's latest bootloader.
upgrade
hi please i need help. i upgrade my lg-su760 with lgmobile support tools but after completion the is no more responding it will blink 3time with lg logo and than off, i dont no what to do. please i need you guys help on what to do. here is my [email protected] god bless

[Q] Samsung Captivate (i897) very weird problem when going to any JB ROM. please help

Hey there XDA,
I have a weird problem when using a Samsung Captivate (ATT i897)
I was running CM9 and i wanted to flash Paranoid Android JB rom, so i followed the instructions to the letter(factory reset, and format cache, etc) and a weird problem occurred, everything works perfectly except:
1) i have no lock screen (even though it is check on (slide))
2) no notifications arrive, (i hear the ringtone and all, but it doesnt tell me anything)
3) i hold the home button and no recent menu comes)
i flashed back to cm9 and the problem came with me.
So i OdIn back to stock and followed this link (http://forum.xda-developers.com/show....php?t=1350266 ) to get root and CWR and went to CM9, it works.
Fast forward one month and i decided to flash Lanight V6.5DD Jelly bean Rom.
The Same exact problem happened, i went back to CM9 and it followed me.
So i want to format everything on my phone using CWR (including /BOOT) and then going in to download mode and using the same method as above as a fresh start ( i have GB boot-loader from Kf1, and two ATT flashes come up whenever i boot my phone up)
maybe if i flash the ginger bread boot-loader again and cleanly (clean format of /boot) then install it will fix it.
.
(QUICK Q: if i format the /boot in CWR can i go into download mode????????)
Hopefully that will fix the problem
i would like to see what is your opinion and expert help.
Sincerely,
Thatguy2007

[Q] Touch screen not working after software upgrade

I have an LG P920 and after I tried out the official 4.04 (installed with LG flashtools) and after the upgrade (which was a success) my touch screen is not working.
I tried the following instructions:
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1942836
I eve tried this one: http://forum.xda-developers.com/showthread.php?t=1629307
It is common that I was able to do the recoveries as they are in the guides, so all three recovery attempts was successful, but after the first boot the touchscreen was not working with any version. For the last time I used LG Mobile Phone Update tool and used phone recovery mode to get back the official SW version for my IMEI. The process was a success, my phone recovered to the original SW version, but the touch screen is still not working.
If someone has an idea what to do or try it, it would be highly appreciated.
MOD: because there is no answer yet I just ask: it is possible that some software elements which are not part of the upgrading or recovering image is the reason why my touch screen is not working? For example the bootloader or the recovery or fastboot, or anything? Maybe there is a part of the phone which is not recovered properly, but I just guessing.
Dchard
Re:
I tried out latest CM10 with ICS bootloader and recovery, the installation was a success, the CM10 boots up fine, but the touchscreen is still not working...
I really exhausted all my options, did all the recovery and resurrection guides, all of it was a success but my touch screen is still not working.
Dchard
dchard said:
I tried out latest CM10 with ICS bootloader and recovery, the installation was a success, the CM10 boots up fine, but the touchscreen is still not working...
I really exhausted all my options, did all the recovery and resurrection guides, all of it was a success but my touch screen is still not working.
Dchard
Click to expand...
Click to collapse
Your display isn't working whatever you do, right?
Maybe it's the obvious.
I mean if all of your flashing was a success than there must be a hardware problem.
I hope I'm wrong...
Try ressurection guide to go back to GB and if that doesn't work...
Money=new display
Ediy:
The cheapest digitizer on ebay is 17$ so it's not that much as a last resort.
www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=lg+p920+digitizer&_sop=15
Sent from my LG-P920 using xda app-developers app
jocazmaj said:
Try ressurection guide to go back to GB and if that doesn't work...
Click to expand...
Click to collapse
I'am doing it the second time but now after successfully flashing V21E and after that using V21E recovery (as in the guide) I got constant bootloop (LG logo), and I cannot get it out from bootloop with flashing the same V21E to it the third and forth time. I know bootloop means reflash the device but I don't think this is going to solve the problem.
Factory reset.
Sent from my LG-P925g using xda app-developers app
xbsall said:
Factory reset.
Sent from my LG-P925g using xda app-developers app
Click to expand...
Click to collapse
Did that too still bootlooping.
MOD: I did everything according to your guide, all of the steps were done successfully, but after it, there is only bootloop and the recovery is not accessible either.
MOD2: it is interesting because I tried to install several GB versions beside the v21E and it seems all of it has the same bootloop issue after flashing. If I put up an ICS variant like CM10 or one of the official roms (with ICS bootloader) they all boot up but the touchscreen is not working even with the official ROMs.
Dchard
Here I have the same problem. No touch screen on ICS.
To downgrade to GB I had to flash a corean froyo v10g .bat first. For example w.ww.wuala.com/Xafalo/LG%20P92...est%20Bin.rar
After I flashed v21e, all OK.
I updated with the oficial LG software and all was successful to install ICS, but my touch screen is not working...
Additionaly, in the TWRP recovery on ICS bootloader, the touch screen is not working
Josemi
simply a duplicate touch change your touch....
I have identical problem. No touch screen. I try a new glass digitizer touch screen, but no work. My lg is not for sale
look
dchard said:
I have an LG P920 and after I tried out the official 4.04 (installed with LG flashtools) and after the upgrade (which was a success) my touch screen is not working.
I tried the following instructions:
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1942836
I eve tried this one: http://forum.xda-developers.com/showthread.php?t=1629307
It is common that I was able to do the recoveries as they are in the guides, so all three recovery attempts was successful, but after the first boot the touchscreen was not working with any version. For the last time I used LG Mobile Phone Update tool and used phone recovery mode to get back the official SW version for my IMEI. The process was a success, my phone recovered to the original SW version, but the touch screen is still not working.
If someone has an idea what to do or try it, it would be highly appreciated.
MOD: because there is no answer yet I just ask: it is possible that some software elements which are not part of the upgrading or recovering image is the reason why my touch screen is not working? For example the bootloader or the recovery or fastboot, or anything? Maybe there is a part of the phone which is not recovered properly, but I just guessing.
Dchard
Click to expand...
Click to collapse
Try to flash this rom
with the same tools in this Thread http://forum.xda-developers.com/showthread.php?t=2337545

[Q] Custom ROM always bricking

Hi there, I have been trying for countless hours to make a custom ROM work on my P920 with no results, always some issues. I've managed to brick my phone in different ways a billion times now, then spent billion hours unbricking it and in the end I'm always back to where I started. I would really love some help please.
My phone is P920.
The android version I'm running is: 2.3.5
Kernel version: 2.6.35.7+
Software version: V21E
Rooting method: megatron
Now I would like a ROM that uses Android 4 and that can still use the 3D features such as 3D camera, the ROM calledthe Darkroom International would be an example I imagine.
While that's one of the ROMs that I would want, I've tried many, and always encountering issues, let me clarify.
First of all my device has to be rooted and since SuperOneClick doesn't work for me as it gets stuck on step 7, I use megatron which works well. I even double check if my phone is rooted with the Root Checker from the Android store. Now according to the guides I've read I need a custom recovery system, so I install Clockworkmod. I then place the ROM on the SD card, in the recovery menu I delete cache, that other cache, format it, format system, data, everything those guides tell me to. Afterwards, I install the ROM by selecting the zip and then I reboot. I've tried like 3 different ROMs, jellybem, cyanogenmod and some other. Yes I know none of them support 3D features - I didn't know at the time. Anyway, the issue was always the same, right after the LG logo there would be a screen with some weird colors showing the display of what happened before the phone crashed. Before it crashed? Yes, the phone would actually boot into the ROM but only for a few minutes, crashing afterwards. The next time I would boot, it would show that weird screen with those fancy colors with what happened just before it crashed. So I followed some steps and I got back to the original 2.3.5 ROM, everything back to normal.
I tried doing some more research and I came across the Darkroom Intentional ROM which had a bit different instructions. It asked me to install TWRP recovery with a bootloader, so I did, successfully, then did all the clean cache etc, installed ROM, bam, wouldn't boot at all. Oh boy have I had issues here, I couldn't even get it back to the default 2.3.5 stock ROM because my phone wasn't even recognized in the device manager. So I did some more research, found a solution, managed to flash back to 2.3.5 stock and I'm back to square one.
Now, could someone please help and explain to me what exactly have I done wrong and how I can make it right? I've spent countless hours now trying to install a custom ROM with no success. Sorry about the long read. If you need me to supply some more information please let me know. Thank you.
First of all if u want to use an ICS ROM then u need to update to ICS FIRST u can't flash it directly from 2.3.5 u can use xbsalls thread to update......
Next if cm based Roms are crashing then u need to flash bootloaders which means u should use os_hacking tool to flash ICS bootladers if u wanna update
Or flash GB bootloaders
So first update if u want
Root
Flash bootloaders
Flash recovery
Flash Roms
Sent from my Nexus 4 using xda app-developers app

[Q] Boot loop

Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!
First install ICS V30A baseband use this video (you may need to go in to the stock recovery after flashing and do a factory reset is a problem arises during flashing)
https://www.youtube.com/watch?v=FqC5qw6WRaY&feature=youtube_gdata_player
secound install WKparts bootloader and TWRP you can use a tool om this forum named simple tool can be found here everything you need is in the tool
https://www.dropbox.com/sh/p959msww1ol04s4/BUlrkRLEs7
and then load a rom on to the external SD card and flash it in TWRP or CWM touch i recomend
http://forum.xda-developers.com/showthread.php?t=2164367
if you want the newest CM although it's a bit more hassle with this 4.2.2 pacman rom as you need to delete the first line in updater script for it to work properly on ICS
@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.
@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.
This what I have flashed:
Kernel-versie
3.0.21-CM+
CyanogenMod versie
10-20130908-NIGHTLY-p920
Build datum
Sun Sep 8 11:42:08 PDT 2013
Buil-nummer
cm-920-userdebug 4.1.2 JZO54K eng.
jenkins.20130908.114141 test-keys
i don't know where you can flash only the base band but the V30A haves baseband in it and it makes to that you have to flash the custom bootloader which works really good (can boot anything)
You can flash baseband with LG Flash Tool.
drastic00 said:
You can flash baseband with LG Flash Tool.
Click to expand...
Click to collapse
Can you please tell me how, step-by-step. I've read some tutorials here but they are so not easy to read because they always use so many different colors and fonts it becomes hard for me to understand what they are saying.
Mine is about as clear and detailed as you will find
http://forum.xda-developers.com/showthread.php?t=2195753
CyanogenMod NIGHTLY-p920 unstable
Gilbertvanhaasen said:
Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!
Click to expand...
Click to collapse
CyanogenMod NIGHTLY-p920 unstable .
look & flash this rom http://forum.xda-developers.com/showthread.php?t=2337545

Categories

Resources