Related
I've been playing around with a Nexus S 4G that I have lying around and never used, and I've ran into a few problems, but you've all been helpful. I rooted all my old EVO 4G's without any problem, but the other day I rooted my NS4G using a one click/simple root and downloaded ClockWorkMod etc. But now for some reason It seems like I've almost lost my root? Is that possible? I still have the little unlocked symbol when booting up.
I've searched this forum and Google and haven't found anything, which could possibly be because I don't know what to look for. I've never had this happen :/
Currently running the stock 2.3.7
Nobody? I just need a little help.
Did you flash a superuser.zip after you installed clockworkmod?
SeeNah said:
Did you flash a superuser.zip after you installed clockworkmod?
Click to expand...
Click to collapse
I thought I had... But no lol
Thank you. Sorry for pretty much making a useless thread :/
Its the Q&A forum ask away! Lol
Did flashing it work for you though?
SeeNah said:
Its the Q&A forum ask away! Lol
Did flashing it work for you though?
Click to expand...
Click to collapse
Yes, it did. Thank you!
Now I just need to re figure out how to backup my stock rom on rom manager. I need to do that if I'm going to flash a custom rom onto my NS4G correct? I've never actually gone that far with my phones lol.
Slap-Yourself :) said:
Yes, it did. Thank you!
Now I just need to re figure out how to backup my stock rom on rom manager. I need to do that if I'm going to flash a custom rom onto my NS4G correct? I've never actually gone that far with my phones lol.
Click to expand...
Click to collapse
Okay lol hold on so just go make sure you
1. Unlocked the bootloader right?
2. Flashed a custom recovery (clockworkmod)?
3. Flashed superuser for root access?
4. Now you have a stock rooted ROM?
If you have/did all that then yeah you could backup your stock rooted ROM, you don't need to back it up but its helpful just incase you mess something you could always restore it to start all over
And you could backup any ROM you install incase you didn't know, just remember when you install different ROMS make sure to do a proper full wipe which includes data/factory reset/wiping DALVIK cache, and formatting system and boot in the "mount" option in CWM. And now I think your good lol
SeeNah said:
Okay lol hold on so just go make sure you
1. Unlocked the bootloader right?
2. Flashed a custom recovery (clockworkmod)?
3. Flashed superuser for root access?
4. Now you have a stock rooted ROM?
If you have/did all that then yeah you could backup your stock rooted ROM, you don't need to back it up but its helpful just incase you mess something you could always restore it to start all over
And you could backup any ROM you install incase you didn't know, just remember when you install different ROMS make sure to do a proper full wipe which includes data/factory reset/wiping DALVIK cache, and formatting system and boot in the "mount" option in CWM. And now I think your good lol
Click to expand...
Click to collapse
Unlocked Bootloader? If I boot in fastboot it says Unlocked. Is this what you mean?
I have ClockWorkMod, but I haven't done anything with it.
I have superuser from the root
and I was working with a stock ROM the whole time....
I think I'm ok lol
So I'll back up my ROM, and flash a Nightly CM9? And back that up as well? Just perform a factory data reset before doing so, right?
Slap-Yourself :) said:
Unlocked Bootloader? If I boot in fastboot it says Unlocked. Is this what you mean?
I have ClockWorkMod, but I haven't done anything with it.
I have superuser from the root
and I was working with a stock ROM the whole time....
I think I'm ok lol
So I'll back up my ROM, and flash a Nightly CM9? And back that up as well? Just perform a factory data reset before doing so, right?
Click to expand...
Click to collapse
Yeah if it says unlocked your good to go. The super user.zip you first flashed won't be needed once you flash different ROMS, it was only needed for stock because you didn't install a ROM you just unlocked the boot loader and super user just gave you root access that didn't come with stock.
Yeah backup your stock ROM JUST in case you encounter a boot loop so you can just restore and start over, you don't need to back up CM9 that's completely your choice if you want . Its convenient though if you like CM9 but still like to flash other ROMS that way you can just go back if you miss CM9 without doing the whole setup process.
And a full wipe is
Data/factory reset
Then wipe dalvik under "advanced"
Then wipe system and boot under the "mount" option in CWM
stellar said:
Yeah if it says unlocked your good to go. The super user.zip you first flashed won't be needed once you flash different ROMS, it was only needed for stock because you didn't install a ROM you just unlocked the boot loader and super user just gave you root access that didn't come with stock.
Yeah backup your stock ROM JUST in case you encounter a boot loop so you can just restore and start over, you don't need to back up CM9 that's completely your choice if you want . Its convenient though if you like CM9 but still like to flash other ROMS that way you can just go back if you miss CM9 without doing the whole setup process.
And a full wipe is
Data/factory reset
Then wipe dalvik under "advanced"
Then wipe system and boot under the "mount" option in CWM
Click to expand...
Click to collapse
I'm not sure if I'm supposed to post links to videos or not. But I'm in love with some of the features this guy has on his NS4G
https://www.youtube.com/watch?v=IKdyAm3CgHc
He said it was a nightly etc.
The hidden status bar and bottom menu hidden is amazing. I also like the inverted G-Mail and Facebook. Is this all separate from the Nightly ROM?
Hey guys, its my first post and I tried searching the forums and google for the answer but didn't seem to find any.
I have the s3 SCHi535-VRLHE firmware and rooted my phone with through Noxious Ninja's walkthrough. During the process (Win7 4bit) after installing the drivers I let windows update update my drivers and cause a conflict with the 1.4.6 drivers. Should of stopped there but went through with rooting anyway (I know I'm a noob).
I have not flashed any custom ROMs after I rooted so my question is what's the difference between a factory reset vs. flashing the stock rom back onto my phone now?
Looking forward to reading and hopefully learning something from your responses!
Malik
A factory reset will just clear out your user data. You should probably put a stock ROM on your exSDcard, boot into recovery, wipe data, then flash the ROM. That will put you back to stock. Though you'll still be rooted and unlocked.
e90driver said:
A factory reset will just clear out your user data. You should probably put a stock ROM on your exSDcard, boot into recovery, wipe data, then flash the ROM. That will put you back to stock. Though you'll still be rooted and unlocked.
Click to expand...
Click to collapse
If I already did a factory wipe/reset is it safe to flash the stock rom onto that or do I have to root again?
HI, i have been having isues with my asus tf101 baterry, about one month ago it suddenly charge and discharges, like: 10%-25%-40%-70%-80%-100%...I made a factory reset but nothing. 2 weeks ago, it solved alone, without do anything, and was ok for 2 weeks, now again i have the problem..
i have installed cwm recovery, i want to change to android revolution rom, to see if the problem finish:
1 question: How i change from cwm to twrp recovery? installing twrp from cwm using a zip? is there no problem?? or downloading goomanager, installing recovery script?? Is there any problem to use cwm or twrp( i have read, to instal kk i dont use cwm)?
2 question, what rom is stable to try to solve this? i see kk 4.3 etc, but i just one my baterry works ok...
3 question, is there any way to clean absolutely the stock rom? i tried wipe cache, dalvik, factory reset(again) but nothing solve.
4 question, is possible to wipe ALL including system, and install the asus stock rom using zip¿?
Thanks for your atention, please be the most specifically possible because i am new on this, and i just one my tablet for study(read books).
I have a asus tf101 b70 root, with CWM recovery is a old version 5.0.26 something..
cesar_cjx said:
HI, i have been having isues with my asus tf101 baterry, about one month ago it suddenly charge and discharges, like: 10%-25%-40%-70%-80%-100%...I made a factory reset but nothing. 2 weeks ago, it solved alone, without do anything, and was ok for 2 weeks, now again i have the problem..
i have installed cwm recovery, i want to change to android revolution rom, to see if the problem finish:
1 question: How i change from cwm to twrp recovery? installing twrp from cwm using a zip? is there no problem?? or downloading goomanager, installing recovery script?? Is there any problem to use cwm or twrp( i have read, to instal kk i dont use cwm)?
2 question, what rom is stable to try to solve this? i see kk 4.3 etc, but i just one my baterry works ok...
3 question, is there any way to clean absolutely the stock rom? i tried wipe cache, dalvik, factory reset(again) but nothing solve.
4 question, is possible to wipe ALL including system, and install the asus stock rom using zip¿?
Thanks for your atention, please be the most specifically possible because i am new on this, and i just one my tablet for study(read books).
I have a asus tf101 b70 root, with CWM recovery is a old version 5.0.26 something..
Click to expand...
Click to collapse
Q1: I think you can just flash the new recovery via the current recovery if you have the new recover zip file.
Q2: Kat Kiss works fine for me.
Q3: If you want to completely return to stock, you would have to use NVFlash. There are tons of instructions on the Dev thread. I primarily use Tubuntu for flashing with NVFlash. [http://forum.xda-developers.com/showthread.php?t=1995157]
You can find other images as well. I used a stock image once to RMA the tablet but now I'm not sure where I got it. This method will ensure that every bit in your memory is exactly as it left the factory. Including the bootloader, recovery partition and everything else.
Q4: Refer Q3.
Download flashable TWRP 2.6.3.11 zip for TF101:
http://forum.xda-developers.com/devd...ct/dl/?id=3280
You should use TWRP for KatKiss ROMs, do not use CWM
Flash that Zip from CWM then reboot fully into your current ROM, then reboot into Recovery to check it has flashed properly
From TWRP you can wipe everything and flash KatKiss & Gapps
*Detection* said:
Download flashable TWRP 2.6.3.11 zip for TF101:
http://forum.xda-developers.com/devd...ct/dl/?id=3280
You should use TWRP for KatKiss ROMs, do not use CWM
Flash that Zip from CWM then reboot fully into your current ROM, then reboot into Recovery to check it has flashed properly
From TWRP you can wipe everything and flash KatKiss & Gapps
Click to expand...
Click to collapse
Is this the same process for going from TWRP to TWRP? just "install" the newest version from recovery and do the reboots?
stache12 said:
Is this the same process for going from TWRP to TWRP? just "install" the newest version from recovery and do the reboots?
Click to expand...
Click to collapse
Yep, so long as you reboot into your ROM after flashing the new TWRP before booting back into recovery
Thanks for your reply, i will tray soon. So i want to clean the asus stock room to see if battery goes ok, i tried wipe data, cache, dalvik, with cwm, but nothing.
If i install twrp what more options can i try before change the rom? what more wipe do i need?? and finally, if i change the rom, is possible to go back to asus stock just flashing from recovery? or how should i do?
Apart from wiping the ROM (SYSTEM) there's not much else you can wipe, you could try wiping the same as you have already done, but from TWRP, see if that makes any difference, maybe the battery is coming to the end of its life
You can flash stock ASUS ROMs back again from TWRP yes, but you will wipe your recovery & ROM back to 100% stock by doing it
Best thing to do is to make a full Nandroid Backup from TWRP before flashing any custom ROMs, save it to MicroSD Card, then if you want to go back to the way it is now, just restore the backup from TWRP
That way you keep TWRP and can switch between as many ROMs as you like and always have your stock backup to go back to whenever you want
46999589
*Detection* said:
Apart from wiping the ROM (SYSTEM) there's not much else you can wipe, you could try wiping the same as you have already done, but from TWRP, see if that makes any difference, maybe the battery is coming to the end of its life
You can flash stock ASUS ROMs back again from TWRP yes, but you will wipe your recovery & ROM back to 100% stock by doing it
Best thing to do is to make a full Nandroid Backup from TWRP before flashing any custom ROMs, save it to MicroSD Card, then if you want to go back to the way it is now, just restore the backup from TWRP
That way you keep TWRP and can switch between as many ROMs as you like and always have your stock backup to go back to whenever you want
Click to expand...
Click to collapse
Thanks!! I will try, but apart from wipe system(rom) what more wipes can i try without erase the rom?..I think not, because a week ago the battery was perfect working...i hope so.
CACHE,
DALVIK CACHE,
FACTORY RESET,
INTERNAL STORAGE,
FORMAT DATA
Only other 2 options are SYSTEM & EXTERNAL STORAGE
So my cousin had the this tablet she hadn't us for a while and she asked to to fix it up. Root it put some apps on it blah blah blah. So i rooted it using this: http://forum.xda-developers.com/showthread.php?t=1681155/
Everything was fine and it went smoothly, I had root access, TWRP recovery that it came with and it was working fine.
I wanted to put a ROM on it for my cousin to match her phone so I found this: http://forum.xda-developers.com/showthread.php?t=2584265
So, I flashed the Rom and it was fine. Then I flashed the Gapps and it said that the system partion didn't have enough space.
Here is where I screwed up (I think). TWRP said that I lost root access and i had to fix it BUT i had to swipe a bar at the bottom to fix it. My dumbass pressed the button in the middle of the screen which was to ignore it. I didn't see what i was doing and i messed up
So I lost root or something and when i turn on the device and try to boot into recovery by holding the Power + Vol Down keys it does not work!
Now I have a tablet with android 4.4.3, no Gapps, no root, no recovery. I have tried to factory reset it but the one in settings do not work.
I'm stuck and I need help from someone smarter. Thank you for anything.
Id start again, sounds like something in recovery got messed up if it thinks the system partition is not big enough for gapps
Flash TWRP with Easyflasher
http://forum.xda-developers.com/showthread.php?t=1688012
Download ROM & Gapps to MicroSD Card
I suggest KatKiss #29 & Gapps from this link
http://forum.xda-developers.com/showthread.php?t=2592890
Factory reset & Wipe everything except External Storage from TWRP
Flash ROM
Flash Gapps
Wipe Cache & Dalvik Cache
Reboot
Nothing more nothing less is needed, so if it doesn't work by doing the above, there are other problems
ok so i installed the drivers it easyflasher was asking for and now it asks whether the device is SBK1 or SBK2, how do i find out whether the device is B70 or above... I feel dumb again... It also asks if its in APX mode... i need help again
ok i figured out the easyflasher and i get the recovery but, when im done flashing all the files and boot the device it says that i have to repair root, like before and even if i say to do so i lose the recovery every time meaning i have to go and put the recovery back onto it and do everything again.....
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
RoughRunner said:
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
Click to expand...
Click to collapse
KatKiss is already rooted by default, you should not flash an additionnal supersu zip.
Just Flash the rom then gapps from the KatKiss thread
wipe cache + dalvik-cache
then reboot.
If you're coming from another rom version, a full wipe / factory reset is recommended before flashing too.
RoughRunner said:
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
Click to expand...
Click to collapse
QUOTE:
Nothing more nothing less is needed, so if it doesn't work by doing the above, there are other problems
--
As Tim says, and as I said, if you had just followed my instructions and not tried adding your own section of the process, you would have had no problems
timduru said:
KatKiss is already rooted by default, you should not flash an additionnal supersu zip.
Just Flash the rom then gapps from the KatKiss thread
wipe cache + dalvik-cache
then reboot.
If you're coming from another rom version, a full wipe / factory reset is recommended before flashing too.
Click to expand...
Click to collapse
ok thanks theres the problem all fixed thanks
Hi guys, can somebody help me? I received the stagefright update this morning and after downloading it and rebooting, the phone stopped working. It shows the logo animation for a few seconds then the screen goes black. It's a rooted and unlocked phone so i don't know if thats the cause. Also, i can access the recovery mode pressing power and down. Other than that nothing.
If you were rooted and updated ya..the rooting may be the reason
So as you can access the bootloader just flash the stock rom back and you will be done with it..
Jaydeep123 said:
So as you can access the bootloader just flash the stock rom back and you will be done with it..
Click to expand...
Click to collapse
I always forget how peacefull people with knowledge can be. Thanks mate, will do that.
But, just for curiosity: rooted phones tends to have problems after updates?
Yes It may get error or Somthing Else Thats Why I prefer if a update is avaiable flash back to stock and then proceed
Just a quick update. Flashed stock, worked fine. Thanks all.
Also, sorry for posting under general, i was so worried that i forgot to put this under HELP TROUBLESHOOTING.
Also, if I went there before i would find this thread here with the same problem and solution
http://forum.xda-developers.com/2015-moto-g/help/ota-caused-boot-loop-t3202322/
Thanks all again.
reinaldojr said:
Just a quick update. Flashed stock, worked fine. Thanks all.
Also, sorry for posting under general, i was so worried that i forgot to put this under HELP TROUBLESHOOTING.
Also, if I went there before i would find this thread here with the same problem and solution
http://forum.xda-developers.com/2015-moto-g/help/ota-caused-boot-loop-t3202322/
Thanks all again.
Click to expand...
Click to collapse
Mod will move or merge.
Sent from my MotoG3 using XDA Free mobile app
Technically, it should not install at all if it's been rooted. It's interesting that Moto has let this slip by.
In the future, if you have made a single change in the system partition...root, build.prop edit....anything...even custom recovery or kernel...you should reflash your current factory image, reboot, then flash your updated factory image. It's VERY IMPORTANT you reboot between flashing one factory image and the next, though. You may have more issues if you don't.
hp420 said:
Technically, it should not install at all if it's been rooted. It's interesting that Moto has let this slip by.
In the future, if you have made a single change in the system partition...root, build.prop edit....anything...even custom recovery or kernel...you should reflash your current factory image, reboot, then flash your updated factory image. It's VERY IMPORTANT you reboot between flashing one factory image and the next, though. You may have more issues if you don't.
Click to expand...
Click to collapse
Hello HP429; reflashin full factory image would effectively wipe phone
sunandoghosh said:
Hello HP429; reflashin full factory image would effectively wipe phone
Click to expand...
Click to collapse
Not if you only flash the system, boot and recovery image files
Recover the factory
I did the update and as mentioned previously on the thread stales after the logo. (bootloader is unlocked)
I can not find my oem backup. I tried twrp on recovery and was able to backup other stuff. Is there a way to generate the OEM so that i can flash or any other roms that are compatible with Moto G 3rd generation?
Try wiping cache, dalvik cache and data with TWRP. Don't use stock recovery for the data wipe or you will lose all the files stored on your internal partition, as well.