Database Info

Cuts my hand?

Hi all,
I got my Nexus one and ever since I am bugged with this "defect"?. I checked with one of my friends and his N1 got this defect too. Do you all have it?
The defect is that; Right above the volume control buttons, the back cover doesn't fit. Part of the front casing (being hard and all) cuts my fingers when i try to hold this thing in my right hand. And that's my hand I use for reading stuff..
My questions are:
- do you have the same problem?
- if not, how can I order a back cover that fits perfectly? since I am really really annoyed with this?
- if there's another way of fixing this issue, what would that be?
best,
kirpi
I am from Turkey and one of my friends brought this n1 to me by the way, so rma is not an option [and I actually unlocked the bootloader already anyways]

mine does not have this defect
http://www.htc.com/www/support/nexusone/
they might still get you a replacement part for a hardware defect that cut you.. id call or email them and ask

Mine is fine.

My first Nexus One did not have this defect. My replacement does.
Call HTC and have them send you a replacement battery cover. If the replacement doesn't fit, have them send you a new phone.

Yes, I noticed it too and looked all over the web to see if it was normal. Seeing as others have noticed it to and some have even had one that fits properly and one that doesn't I think I'll try to call HTC and have them send a free cover. Has anyone tried this and been successful?

well, apparently it is not normal. so I asked htc how can i replace the cover.
i actually wait for any vendor /chinese etc/ to produce spare parts so that i can buy one in case htc cannot provide the cover to turkey

The back cover is off for me as well, however, I would suggest manual labor to toughen up your hands.

kirpi said:
well, apparently it is not normal. so I asked htc how can i replace the cover.
i actually wait for any vendor /chinese etc/ to produce spare parts so that i can buy one in case htc cannot provide the cover to turkey
Click to expand...
Click to collapse
Did you speak to someone at HTC? Did they offer to send a replacement cover? The thing is I can't tell if it's the cover that is off or if the phone part is off.

The back case is a little off. And from all the pictures of nexus one... it seems to be the case for everyone. However, nothing that will cut finger. I rubbed my finger on it for 2-3 minutes..nothing.
Everyone else.. look closely.. the metal part between volume and power is slightly visible as compared to smooth side of left. It is very slight and looks like a design change HTC made for placing volume and power key.

Called HTC and they agreed to send out a replacement battery cover so we'll see if that changes anything.

My first phone did not have this. My second did. I am now on my third and it has the slightest of a lip. You couldn't even notice it unless it was up to your eye. However my issue is with the screen. The right side of the screen is not flush with the phone, and there is a jagged lip that is horrid. I've been waiting for them to close my current ticket ( It's been 2 weeks, and have my money back in my back, but it still says testing phone ( yes , it was unlocked =) )). My old phone had massive dust under the screen.
Anyone else have this screen to phone edge problem? I almost regret selling my iPhone as the quality control seemed better. But I love my openess

I have no edge issues on the back cover...

muncheese said:
The back cover is off for me as well, however, I would suggest manual labor to toughen up your hands.
Click to expand...
Click to collapse
yeah if that cut him WOW!!! hahahaha

What kind of moisturizer do you use? Your hands must be silky smooth! Like buttah!

I just noticed this defect today! I only noticed it after dropping it though (while sitting on the toilet it fell out of my pocket) so no damage of course but didn't notice before hand

well i am not that silky smooth but my skin may be a little too sensitive, i admit (allergetic person here)
However, the off part is not that much small in my casing.
Also it might be related to how I handle the phone. I use my right hand to hold it and my index finger and middle finger hovers around that problematic edge all the time while using it. I changed my handling (since i cannot change jobs for a manual labor that easily )
anyways, HTC has agreed to send me a back cover without even asking too many questions (obviously to a friend of mine in america) It made me think that, this is a well known issue. If that defect is with the chassis than I'll just wait for HTC desire sell mine after that

I received my replacement battery cover today and unfortunately it also does not fit. I called HTC and they are escalating the issue to the accessories department to have them investigate the battery covers not fitting the recently built Nexus Ones.

cekle
it is saddening to hear that.. the rma life cycle is like hell for me (since i reside in turkey) well, please let us know if ever a fitting cover is sent to you and i will re apply.

I think all the N1s have this defect. Mine is about a quarter of a millimeter off just above the battery. It is actually common in electronics for covers to not fit perfectly.
Do I really care about something being .25 mm off? No.
The better question is, should that be enough to cut your hand or even scratch it?
In any manufactoring there is a "tolarence" that defects have to be under in order to be shipped out. In reality, everything has a defect.
The amount this cover is off is certiantly within most manufactoring tolarences. The N1 isn't going on a space shuttle so there is no need to have a tolarence of .001 mm.
There, you learned somethhing amount engineering and manufactoring.
In all honesty, do I think the tolarence for the cover was a big too high? Yes, but you are building something that costs $175 to make and then turning around and selling it $179 already, some corners must be cut.

arkavat said:
The back case is a little off. And from all the pictures of nexus one... it seems to be the case for everyone. However, nothing that will cut finger. I rubbed my finger on it for 2-3 minutes..nothing.
Everyone else.. look closely.. the metal part between volume and power is slightly visible as compared to smooth side of left. It is very slight and looks like a design change HTC made for placing volume and power key.
Click to expand...
Click to collapse
Mine does not have a gap.
It looks the same on both sides for me.

Aluminum locking case

Ran across this today searching for cases for the Epic. Anyone using one? Its interesting in that it locks the slider during normal use and hinges open if you want to use the keyboard.
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001061&products_id=31414

Now this looks like quite a nice case for functionality.
Now if they just took off the whole part in the back for the clip and form fit the corners a bit more and offered it in more colors that'd be nice.

This may be the best thing I can do for now, I have been scouring for a jelly case to slip over the epic, since I never use the keyboard

Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?

bitbang3r said:
Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?
Click to expand...
Click to collapse
There are videos on you tube. The bottom looks like a very snug press fit. Top must be looser to allow for the hinge to work.
Sent from my SPH-D700 using Tapatalk

...
I had a similar case for my old HTC Titan. I LOVED it. Being a pretty serious phone abuser, that case kept my phone together!
-Rob

I used to have a similar case for my Treo and they are extremely well made. I irregularly dropped my phone from about 5 feet in the air onto hard linoleum and it never suffered any indignities. These come in both black and silver so if you want a different color you would want the silver so you could send it out to be powder coated.
I just ordered one.

Mine came last night.
The good: locks the slider firmly closed. No wobble or "play" at all when pressing the power button. Phone easy to remove (for GameGripper purposes).
The bad: Feels terrifyingly slippery compared to the Seidio ActiveX. Obstructs "slide down" gesture for notifications.
The seemingly fatal (a big one): my "back" fake hardkey keeps randomly going berserk... but ONLY that specific one. The foam in the top half seems to be confusing the capacitive sensor.
Sent from my SPH-D700 using XDA App

Update: I've had the 'search' fake hardkey freak out a few times on me, too.
Another problem: it's definitely affecting reception. 4G and GPS barely work with the case in place.
Sigh. So close. So agonizingly close. It's awesome to not have the phone shear and jiggle apart every time I hit the power button, and the fact that it allows the phone to be easily removed for the Game Gripper without really compromising the slide-out keyboard's usability is very cool.
I'm really convinced that this case went straight from plastic prototype to mass production before anyone actually tried to use it in an area with 4G service, high humidity (presumably what's screwing up the foam and touchscreen), and who didn't just assume that the GPS was dysfunctional because Samsung sucks.
Sigh. Too expensive to throw away, and really nice in ways that ultimately don't matter because the touchscreen-button problem makes it totally unusable

The plot thickens: more touchscreen observations:
* Oddly, there's NO FOAM around the lower part of the screen where the phantom-pressed fake hardkeys are.
* Last night, it went completely berserk with phantom button presses on cue when I rubbed the latch a certain way.
This suggests that the problem's root cause might extend to the electrical conductivity of the case itself. It's strange, because I wasn't able to find reports of the same problem for users of Monaco cases for other phones (like the Droid). Lots of complaints about signal attenuation, but no reports of touchscreen problems.
I'm seriously tempted to buy some liquid electrical tape and coat the inside of the lid to see whether it helps. The problem DOES seem to go away when the lid is no longer in contact with the screen. However, if it's happening because the sensor is acting kind of like a Hall Effect sensor and the case is acting like a Faraday cage, nothing short of making the case (or at least the top lid) out of plastic is likely to fix the problem. Still, it's worth a try since I really like the case itself, and my alternative is to basically chuck it.

Update: as an experiment, I wrapped black electrical tape around the bottom lip of the top part. It helped a lot. I think I might have also found a contributing cause: cat fur. I think wisps of cat fur might be bridging the metal case & screen and carrying static electricity to the sensor. Oddly, though, some of its *worst* back-arrow spasams have occurred with the phone laying on the desk, untouched, 3 feet away.
I'm still trying to think of a good way to plastic-coat the case without making it look bad & get a nice, even black rubbery coating on it.
Sent from my SPH-D700 using XDA App

How thin is it compared to the other plastic cases?

Very interested in getting the Monaco Aluminum Case, which is very similar to this one. My last concern, how thin is it compared to Seidio Innocase Surface?

Bezel Repair

I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.

My recommendation is to buy a case that covers the phone completely, you'll forget about it...

I have a Diztronic case arriving Wednesday, but need to use it with my car dock without the case. It's not a big deal, but given that its trivial to do (except for finding the right paint) I would like to do it.

Well you're definately right, a simple cosmetic fix would be best, here's your part...
Not sure what to tell you man, maybe someone will chime in with some info or similar experience... It's just cheap plastic...
I found this on eHow:
How to Repair Chipped Plastic

You can actually get the bezel separately for $17, but the screen needs to be heated to come off - not easy. Plastic repair is easier (as you pointed out) but a good job requires good paint. Hopefully someone has already tried.
Thanks for the suggestions.

I remembered this thread from cappy section... With people making modifications to their housings... possibly you can msg one of them...

dblevitan said:
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
Click to expand...
Click to collapse
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...

littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
It's all kitted up into one part... the solution is a $250 front part of the phone...

Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250

emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
thanks for repeating exactly what i said an hour before...

emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
Make it easier on yourself next time, kid. Just copy/paste...
Sent from my rooted Mayan calendar

littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
I looked in some drug stores for some nail polish that would match, but never found anything. It's currently in a case, so I rarely notice it. Maybe sometime when I have energy, I'll try to replace the bezel, but not for now.

Well I cracked the glass on my Galaxy S3 and there is some other superficial damage around the bezel. As I am going to be getting another phone shortly anyway I was thinking about this problem and how I could get my phone as possible to "new." After consideration I'm leaning to using an automotive paint/scratch repair pen as opposed to nailpolish. Depending on how it turns out, I'll upload my process, materials, and pictures.

Case-Mate Tough Frame Case

Does anyone else who has one of these cases have a problem with accidentally powering the phone off or hitting the volume rocker? I've always preferred a bumper case (especially for this fatty - anything with a back would just make this thing too thick) but didn't realize until now how important cut-outs are rather than buttons on the case. Every once in a while I feel my phone vibrate in my pocket and pull it out only to see that it is restarting. This never happened with the cheap OEM case which had cut-outs. I'm about to take an exacto knife to it and cut those raised buttons out, but am afraid it'll be too hard to reach the buttons.

Maybe try shaving the case buttons down a bit.

I've had the Case-mate naked tough on since day one, haven't had a single problem with it. Although when I first installed it I had to reinstall it twice to make sure the buttons line up.. Awesome case, just a lil slippery on the back side, but overall I'm very happy with it.

phony01 said:
Maybe try shaving the case buttons down a bit.
Click to expand...
Click to collapse
Actually, I can press the power button just by pressing the case near the power button. It appears they didn't recess the case enough near the button, so shaving off the outside isn't going to help. It would probably be best to shave it down on the inside, but that would be very difficult. I think I'm just going to cut the button out.
wtjra70 said:
I've had the Case-mate naked tough on since day one, haven't had a single problem with it. Although when I first installed it I had to reinstall it twice to make sure the buttons line up.. Awesome case, just a lil slippery on the back side, but overall I'm very happy with it.
Click to expand...
Click to collapse
That's a totally different case than this one.

I have the Vena and liking it. It shows scuffs and scratches but still shows off my custom back fine. No issues with buttons. They work flawlessly.

I don't have your issue above. The side of the case with the buttons is kind of loose, so I emailed the company and never got a response. Then I emailed them back and still didn't get a response. Then about a week or two later I randomly got a brand new case in the mail. They never contacted me, but gave me a brand new case. So I'm happy about it lol. I would suggest contacting them because that should not be happening.

Have your problem in spades.
MrTwo94 said:
Does anyone else who has one of these cases have a problem with accidentally powering the phone off or hitting the volume rocker? I've always preferred a bumper case (especially for this fatty - anything with a back would just make this thing too thick) but didn't realize until now how important cut-outs are rather than buttons on the case. Every once in a while I feel my phone vibrate in my pocket and pull it out only to see that it is restarting. This never happened with the cheap OEM case which had cut-outs. I'm about to take an exacto knife to it and cut those raised buttons out, but am afraid it'll be too hard to reach the buttons.
Click to expand...
Click to collapse
Whenever I touch the phone, I always seem to brush the power or rocker and either turn it or crank the volume. Time for a little surgery. Love it otherwise.

Good cover that works well with the HTC One M9's buttons

Hi All,
I have a relatively rugged cover on my HTC One M9. The cover is great for protecting the phone, but it isn't particularly 'button friendly'. Half the time when I try to turn the volume up on my phone (using the volume up button) the volume goes down, or the volume 'bounces' between going up and down. Many times when I have attempted to turn the volume down (using the volume down button) I have inadvertently turned the screen off, due to accidentally engaging the power button. Ultimately I don't think that the button placement on this phone is particularly well thought out. On future phones I will always check to make sure that the power button is nowhere near the volume buttons. This being said for the foreseeable future I will be using my new HTC One M9 phone so I am wondering if anyone can suggest a good cover that won't cause my buttons to 'play up'. My preference is for a gel cover, or similar, essentially anything that doesn't cover the screen (e.g.: flip covers).
Any suggestions will be greatly appreciated.
Kind Regards,
Davo

Hello there, i would suggest you forget the ugly gel cases and try this one: https://youtu.be/xAqf6hsQ2yQ

After doing a bit of research (I just picked up this phone the other day), I decided to order the Spigen Neo Hybrid, I was going to go with a casemate because I had one a while back and really liked it, anyway. On their site it runs about $35 but I ordered this one yesterday from Amazon for about $20, pretty much everyone has good things to say, even a few people on here recommended it:
https://www.amazon.com/Spigen®-META...+One+M9++case&refinements=p_72:2491149011#Ask
After plenty of searching for "Best Case for HTC One M9", it pretty much boils down to a handful and what you decide will probably be based on your preference. Just looking at the first page of google search results spits back plenty of choices: https://www.google.com/webhp?source...=1&espv=2&ie=UTF-8#q=best case for htc one m9

Hi Guys,
Thanks for the suggestions.
casperlt1 - Can you please leave some feedback on how you found the 'Spigen' cover?
Kind Regards,
Davo

I've had my M9 for nearly a year and have the Spigen Thin Fit cast on it. I don't drop my phones regularly and have never shattered a screen, so my criteria was just to get something that would give better grip, add as little thickness as possible, and let me use the buttons without issue, and this case has been the perfect solution.
Amazon link to Spigen Thin Fit

This case with ice view app. http://cover-discount.ch/htc-one/ht...e-m9-rock-invisible-smart-view-flip-case-gold

Mr Davo said:
Hi All,
I have a relatively rugged cover on my HTC One M9. The cover is great for protecting the phone, but it isn't particularly 'button friendly'. Half the time when I try to turn the volume up on my phone (using the volume up button) the volume goes down, or the volume 'bounces' between going up and down. Many times when I have attempted to turn the volume down (using the volume down button) I have inadvertently turned the screen off, due to accidentally engaging the power button. Ultimately I don't think that the button placement on this phone is particularly well thought out. On future phones I will always check to make sure that the power button is nowhere near the volume buttons. This being said for the foreseeable future I will be using my new HTC One M9 phone so I am wondering if anyone can suggest a good cover that won't cause my buttons to 'play up'. My preference is for a gel cover, or similar, essentially anything that doesn't cover the screen (e.g.: flip covers).
Any suggestions will be greatly appreciated.
Kind Regards,
Davo
Click to expand...
Click to collapse
I had that problem (the volume 'bounces' between going up and down) with the spigen ultra hybrid case, it has some bump to reach the buttons, all did was to cut those bumps with an x-acto and now it's perfect

I've used many cases with mine. The ice view always tears at the hinge, the rugged ones were very cumbersome and one led to my phone dying from water damage (rain collecting in the top part of the case and leaching through the irda blaster)
Spigen neo is my current case and I really like it apart from its far too easy to press the buttons. While driving with the phone in my pocket it often turns itself up or down but I like the case

bonesy said:
I've used many cases with mine. The ice view always tears at the hinge, the rugged ones were very cumbersome and one led to my phone dying from water damage (rain collecting in the top part of the case and leaching through the irda blaster)
Spigen neo is my current case and I really like it apart from its far too easy to press the buttons. While driving with the phone in my pocket it often turns itself up or down but I like the case
Click to expand...
Click to collapse
Cut a little the inside of the case , the buttons in the inside have a little rubber to reach the phone but it's too much. I did that to mine

I have M9 since a week and i have bought Baseus case for it .
Fits perfectly with my M9 . It is also very thin and smooth .
.
I suggest you try this baseus case , which is better than the one i have bought

The best
Ballistics Tough Jacket.

Any recommendations for one with a kick-stand?
Which screen protector do you use?
I hear some types of protectors can cause problems.