Related
My phone has been working fine, up till last night. All of a sudden when I plug it into USB I get an error that there was a device malfunction. In dev man there's a Microsoft WPD FileSystem Volume that windows says cannot start properly, and a unknown device under USB.
I've system restored, I've power drained, I've tried on 3 pc's. Same thing. All pc's are running windows 7 64 bit.
Any ideas?
Maybe reinstalling the samsung drivers from the website. Maybe a driver got corrupted. Other than that I don't know. Bring the phone back get a new one faulty device.
Tried reinstalling drivers. Problem is I can't even reflash because I can't get the phone recognized to use the stock rom.....
if you are getting the same result on multiple PC's then the odds favor that your phone is the problem, and not the computer or drivers.
Have you tried different USB modes?
Have you tried a factory reset?
Trying the reset, we'll see. I'm desperate now. Yes, I've tried Kies and mass storage. I don't even need to select one though. (I have it set to ask) I get the error as soon as I hook it up..
Update: Reset didn't do it.
The Same thing happened to me, i tried Factory Reset but it did not work.
Good luck, I'm about at the point of giving up. I'm trying my work PC tomorrow and if it doesn't work, I'm off to the ATT store.
I called ATT cust Care, the lady did not understand what the problem was and said that i should contact Samsung rather than calling ATT to resolve the issue.
bhanuteja said:
I called ATT cust Care, the lady did not understand what the problem was and said that i should contact Samsung rather than calling ATT to resolve the issue.
Click to expand...
Click to collapse
thats some good troubleshooting right there
Driver issues, I had the same problem with windows 7. Use that usb view program and disable the htc drivers and samsung something usb bla bla drivers. Then replug and use the notifications to mount the sd card. It's hit or miss for me too.
Downloaded USBdeview?? Seems to be what you're talking about. Disabled, all samsung devices, there were 2. Plugged phone in. (I know longer get the mount options) soon as I hit mass storage on the phone though it throws the same error.
Then uninstalled the two devices, same thing. So I uninstalled ALL non HID devices, same thing. Gives me the error, throws an unknown device in dev manager, if I try to update/reinstall the driver it tells me the best one is already installed. Tried uninstalling it and reinstalling from add/remove. Same thing.
I'm thinking this is something with the device, not windows. It seems like the OS is somehow corrupted and not allowing windows to see it/load it.??? Sounds weird but 3 computers and 2 days solid of trying to fix this have gotten me no where.
Are you guys using Win7 x64 or 32?
I've had nothing but trouble with x64 and the samsung drivers. I can get the device to mount as a mass storage device if I uninstall all of samsung's drivers, and I have never been able to get the phone running in debugging mode (drivers always fail, adb shows nothing is connected). I can't even get the drivers working properly under WinXP 32bit running in vmware on my Win7 x64 computer.
The drivers work perfectly fine on my laptop running 32bit Vista, though. Installed the drivers, plugged in the phone, everything runs great.
Have not tested with a linux livecd, but I suspect it will also work fine.
I've only tried on 64 bit so far. I do have an Ubuntu box I could try it on I guess. Let's see....
Well... Nothing. I can't figure out how to get it to work in Ubuntu. Not sure it will. Honestly I just installed it and have yet to spend any time with it.
I use Win7 64 bit, tried it on Win XP but still have the same issue.
I'm wondering if it's the cable now. If I turn the phone off, then plug it in, as soon as the battery icon pops up I get the message. Nothing in DM though.
32 bit, used samsung drivers from their site, all the ones from here. As long as I get a connect once in a while I'm fine. I use my method which works for me. Oh well nothings perfect.
I grew up with rabbit ears and 4 head VCR's with bad tracking.
Yeah, unfortunatey I can't even get it to work once in a while......
So I'm ready to return this phone and switch to Verizon and a Droid X
Problem 1: No matter what I try I cannot get this phone to connect to my laptop or PC I have probably spent almost 6-10 Hours trying to do this.
Problem 2: This is no where near the concern of problem one but it's annoying as hell, following many of the users advice in order to sync my contacts I used a gmail account and it synced 750 of my "contacts" while most of those 750 are worthless to me I have about 210 or so I actually need. So in order to fix this I created a new gmail account and only copied the contacts I needed as a .csv and synced now I can't get rid of the contacts from the original sync without restoring the phone or so it says.
Setup 1: Laptop Dell Lattitude D630 with Windows XP 32bit SP3 and .net frame work 4. I have tried almost everything. Tried using Kies, Updating Kies, Reinstalling Kies, Reinstalling Drivers, Tried ever driver out there, backdating and redoing it all over again etc. tried different USB Cables the closest I ever got was where it would say Connecting ( displayed in KIES ) and would eventually time out.
Setup 2: Desktop Windows XP SP3 32 Bit .net frame work 4 basically ran down the same thing on the desktop as well except for trying the original USB cable going to try that tomorrow
With both setups I can't get either to connect or even mount the drive in debug mode so I can;t even root this piece of garbage.
IS it me? Am I doing something wrong? If so call me an idiot and tell me how to fix it. I'm open to try anything at this point as this is more frustrating then using that piece of garbage Tilt 2 I had before this.
Please oh geniuses of XDA HALP!
If you have any questions please ask or if you think I left something Important out as well
This may or may not help you; however I had to get the official drivers from Samsung and not the ones that people were using - the Galaxy S drivers caused more problems for me. Uninstall, reinstall the proper drivers, reboot. Then reconnect, expand the drivers installation "balloon" and make sure the four drivers necessary install correctly. I kept having a problem with the USB Mass Storage Driver - but the second time got it.
On the phone, switching from Samsung Kies to USB Mass Storage then enabling USB Debugging and connecting directly to my machine(s) solved most of my probs. I'm using the original USB cable; but to be honest not too sure that would make a difference - just don't go too cheap - I'm also using the Nokia N810 microUSB cable without issues.
Not 100% sure that will help you, but I also had some troubles initially. Don't fret. And good luck.
I just went through exactly the same ordeal you describe with a Win XP machine.
I eventually got it to work, here's what I did:
1. I Downloaded and installed in the following order:
A. Windows Installer 4.5 ... reboot
B. .NET Compact Framework 3.5 redistributable ... reboot
C. .NET Framework 4.0 redistibutable ... reboot
D. Windows XP sp3 ... reboot
After that I downloaded the drivers from the Samsung site, installed them and prepped my phone by putting it in mass storage mode, and turning debugging on.
After another reboot, I connected my phone, waited and prayed ... and it worked. It was a rather long wait as I watched it install the drivers ... be patient.
I think the prayer is what eventually worked ...
ekasey said:
So I'm ready to return this phone and switch to Verizon and a Droid X
Problem 1: No matter what I try I cannot get this phone to connect to my laptop or PC I have probably spent almost 6-10 Hours trying to do this.
Problem 2: This is no where near the concern of problem one but it's annoying as hell, following many of the users advice in order to sync my contacts I used a gmail account and it synced 750 of my "contacts" while most of those 750 are worthless to me I have about 210 or so I actually need. So in order to fix this I created a new gmail account and only copied the contacts I needed as a .csv and synced now I can't get rid of the contacts from the original sync without restoring the phone or so it says.
Setup 1: Laptop Dell Lattitude D630 with Windows XP 32bit SP3 and .net frame work 4. I have tried almost everything. Tried using Kies, Updating Kies, Reinstalling Kies, Reinstalling Drivers, Tried ever driver out there, backdating and redoing it all over again etc. tried different USB Cables the closest I ever got was where it would say Connecting ( displayed in KIES ) and would eventually time out.
Setup 2: Desktop Windows XP SP3 32 Bit .net frame work 4 basically ran down the same thing on the desktop as well except for trying the original USB cable going to try that tomorrow
With both setups I can't get either to connect or even mount the drive in debug mode so I can;t even root this piece of garbage.
IS it me? Am I doing something wrong? If so call me an idiot and tell me how to fix it. I'm open to try anything at this point as this is more frustrating then using that piece of garbage Tilt 2 I had before this.
Please oh geniuses of XDA HALP!
If you have any questions please ask or if you think I left something Important out as well
Click to expand...
Click to collapse
You're better off with an iPhone iOS4. Getting the Droid X is just as complicated, it's just how a Android is. You got to learn to use it before it gets powerful.
On a side note, if you do what the above posters are telling you to do, then I hope you love your Captivate as much as I love mine.
Best damn phone I have ever had. Have not had one real problem with it.
But please, read through the android development stickies, there are so many tutorials you just need to follow.
Download the Drivers you need, 32 or 64 bit what ever you need.
gerbick said:
This may or may not help you; however I had to get the official drivers from Samsung and not the ones that people were using - the Galaxy S drivers caused more problems for me. Uninstall, reinstall the proper drivers, reboot. Then reconnect, expand the drivers installation "balloon" and make sure the four drivers necessary install correctly. I kept having a problem with the USB Mass Storage Driver - but the second time got it.
On the phone, switching from Samsung Kies to USB Mass Storage then enabling USB Debugging and connecting directly to my machine(s) solved most of my probs. I'm using the original USB cable; but to be honest not too sure that would make a difference - just don't go too cheap - I'm also using the Nokia N810 microUSB cable without issues.
Not 100% sure that will help you, but I also had some troubles initially. Don't fret. And good luck.
Click to expand...
Click to collapse
Can you link me to the Driver set you used? I have tried the captivate drivers, the T mobile Versions as well, along with a the generic Galaxy S drivers
Battlehymn said:
I just went through exactly the same ordeal you describe with a Win XP machine.
I eventually got it to work, here's what I did:
1. I Downloaded and installed in the following order:
A. Windows Installer 4.5 ... reboot
B. .NET Compact Framework 3.5 redistributable ... reboot
C. .NET Framework 4.0 redistibutable ... reboot
D. Windows XP sp3 ... reboot
After that I downloaded the drivers from the Samsung site, installed them and prepped my phone by putting it in mass storage mode, and turning debugging on.
After another reboot, I connected my phone, waited and prayed ... and it worked. It was a rather long wait as I watched it install the drivers ... be patient.
I think the prayer is what eventually worked ...
Click to expand...
Click to collapse
Will Give it a Try
SlimJ87D said:
You're better off with an iPhone iOS4. Getting the Droid X is just as complicated, it's just how a Android is. You got to learn to use it before it gets powerful.
On a side note, if you do what the above posters are telling you to do, then I hope you love your Captivate as much as I love mine.
Best damn phone I have ever had. Have not had one real problem with it.
But please, read through the android development stickies, there are so many tutorials you just need to follow.
Download the Drivers you need, 32 or 64 bit what ever you need.
Click to expand...
Click to collapse
I don't use Apple products, but thanks.
It's not that the Software or procedures are beyond my scope of intellect. It seems that every stickied thread I have read on here has 11 different ways of doing the same thing, and not one process works the same for everyone.
Like I said I'm not opposed to trying anything at this point or starting from scratch I just figured it would be a little bit less confusing.
I guess I assumed it would be
DL Software > Install Drivers and Software > plug in phone and magic it works haha.
So far I love the phone besides the fact that it had an SMS error the other day and Deleted all of my texts, the audio jack has become flakey, and the gmail app has consistent errors. OH and I'm missing text messages from people
Drivers are here: http://www.samsung.com/us/consumer/...ATT/index.idx?pagetype=prd_detail&tab=support
Battlehymn said:
Drivers are here: http://www.samsung.com/us/consumer/...ATT/index.idx?pagetype=prd_detail&tab=support
Click to expand...
Click to collapse
Thanks wanted to be sure, I had tried those on the laptop, I will try them tomorrow along with the other suggestions. Wish I had an office job like I used to then I would screw with it at work.
To fix the contacts, turn off the contact syncing, dowload Contact Remover from Market, run Contact Remover and select all contacts then delete. Now you can turn contact sync back on and you should be all set.
Sent from my SAMSUNG-SGH-I897 using XDA App
you could try simpler first - try to connect without Kies;
1. Phone ->settings->applications->usb settings -> ask on connection
2. Install drivers - I installed the AT&T captivate drivers, then the Samsung Drivers
3. Connect phone - if the screen is unlocked, you should see an option for which USB setting you want
4. Pick Mass storage
5. You should see one or two new drive letters on your machine (internal and SD card if you have one)
6. Pull down notification bar on phone, click USB, use for files, Mount drive
This will validate that you have the drivers installed without doing everything else that is involved with .Net stuff
You really only need the Captivate AT&T drivers for this part to work.
I have 2 XP machines and I have full functionality without installing Kies.
I probably tried everything as well..... if not more, but kept trying on my Win 7 64bit.
Don't know of which step finally worked but in using the updated version of Kies (Kies_1.5.1.10074_2_6), Samsung cable (non-motherboard port?), Samsung official 64bit USB drivers, unmounting External SD, setting Captivate to "ask preference for USB", and a final deep breath.
I ended up copying the Samsung USB driver folder to an easy to find location (desktop) and while in Kies(probably not necess.) I opened Windows device manager and asked each device error message to search that folder for correct driver one by one. It finally worked. I used Kies for Outlook Contacts, selected and used Media Center for music(had to remount SD before it would be recognized). Haven't used, but tried mass storage, modem(tether) and they were correctly recognized. Good luck!
What finally did it for me, after getting all the drivers to install with the phone in debug mode, was to set it to always ask on connection. It refused to install the mtp driver if I just set it to mass storage and left it there. I have no idea why, as mass storage is what I click when it connects, but it seems happier this way.
Sent from my SAMSUNG-SGH-I897 using XDA App
I had problems with kies and launcher pro. Had to switch back to original launcher for kies to work. Haven't tried in awhile.with both programs getting updates, it may be fixed now. My .02.
Sent from my SAMSUNG-SGH-I897 using XDA App
I had the same problem. .. actually I still have the same problem, however, there are ways to root and enable sideloading without ever hooking up to the computer. Try that out. If you can't find out how to do it, let me know and I'll do a write up.
Rooted Capivate Galaxy S
naplesbill said:
To fix the contacts, turn off the contact syncing, dowload Contact Remover from Market, run Contact Remover and select all contacts then delete. Now you can turn contact sync back on and you should be all set.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks Will do this today.
everything else I will try tonight and let you guys know how it goes I will do it on both my laptop and on my PC at the same time.
Thanks so much for all the suggestions guys
I had the same problem with launcher pro, no matter how I tried to connect, unless I was in debug. Switching to the always prompt or whatever took care of that for me.
Sent from my SAMSUNG-SGH-I897 using XDA App
i knw this isnt really helpful but dont throw it out the window send it to me hehehe
I just tried the older cable that was party to all the unsuccessful Kies attempts and got the same error. Tried Samsung cable.....no issues. Odd because that same cable worked fine for EVO 4G and a Motorola device and Moto Phone Tools.
Could be fluke?
Well first off I want to thank everyone for the words of encouragement. I was able to finally get the phone rooted. not 110% sure how I did it but it's now done.
My second issue is now getting Kies to work, all it does is sit there and say connecting device
Thanks again everyone
After spending my entire Saturday trying in vain to get my win 7 laptop to recognize my captivate I've decided I need to reach out for some help.
Right when I gore my phone, without too much hassle I did the superoneclick root via my pc with great success. Did the lagfix after that and all was well. Go me right?
I used my phone for a little bit and decided that it was time to but sonera music and pictures on it. This is where it all went wrong.
For background, I have done up to this Point: tried both driver sets that are floating around (and exe and the version most often linked to in help threads with a simple setup file), Ive tried kies, I've tried going into device manager to manually locate the divers. Nada.
At this point the drivers with the setup file will no longer install because the install of the exe screwed up at some point. Windows is only showing the device as us composite hub or as a unknown device. I can sometimes get it to say Samsung android usbb device but it shows that it is in error and it still wot see the phone. Someone else asked me if I had used the mount option when I comes up in my notifications bar which I haven't because it never gives me the option. I've tried disabling launcherpro, undoing the root, undoing the lagfix, formatting and wiping user data on the phone, still nada. I've tried all usb modes. Nada.
First things first, can someone explain to me exactly what I should do in device manager to get the drivers in order? I'm pretty sure this is the root of my problem. Any idea on how to get rid of the erroneous drivers that are causing the driver setup to fail?
Any help would be great :S
Need to try and manually remove three old drivers, then try and re install. Id suggest using the ones design gears posted on his one click back to stock post
Sent from my SAMSUNG-SGH-I897 using XDA App
I snipped this from one of my old posts in the Vibrant section...
For those of you having a problem with Windows 7 recognizing your Vibrant ... here is how I fixed it on my system.
*Note: You do not need to load any special USB drivers for your phone to be recognized in Mass Storage mode in Windows 7.
*Warning: You follow these instructions at your own risk ... no screaming at me if you try it and something gets screwed up!
1) Navigate your way into the Device Manager / Universal Serial Bus Controller
2) Uninstall the device(s) "USB Root Hub" (My system had 2 listed)
3) You will lose mouse and keyboard control (because you just removed the USB Hubs)
4) Reset your PC and allow Windows to boot normally.
5) Go back to the device manager and wait for all of the "!" marks to go away as windows re-installs the USB Hubs and reinitializes all of your devices.
6) Make sure your Vibrant is in mass storage mode and has USB debugging OFF
7) Plug in your Vibrant via the USB cable and be amazed as windows recognizes your device and assigns the drive letters. After you select the mount option on your phone you will have normal access via windows explorer.
Hope this helps some of you out there !!!
~Stresa
Sent from Samsung Vibrant
thanks for the good responses guys but both of those have failed. Odin cant even see my phone, same issue with superoneclick root. I even just tried on an enitrely different PC and got the same "device could not start" message.
tried deleting all the drivers for the USB devices. nada. still no connection
Subrock said:
After spending my entire Saturday trying in vain to get my win 7 laptop to recognize my captivate I've decided I need to reach out for some help.
Right when I gore my phone, without too much hassle I did the superoneclick root via my pc with great success. Did the lagfix after that and all was well. Go me right?
I used my phone for a little bit and decided that it was time to but sonera music and pictures on it. This is where it all went wrong.
For background, I have done up to this Point: tried both driver sets that are floating around (and exe and the version most often linked to in help threads with a simple setup file), Ive tried kies, I've tried going into device manager to manually locate the divers. Nada.
At this point the drivers with the setup file will no longer install because the install of the exe screwed up at some point. Windows is only showing the device as us composite hub or as a unknown device. I can sometimes get it to say Samsung android usbb device but it shows that it is in error and it still wot see the phone. Someone else asked me if I had used the mount option when I comes up in my notifications bar which I haven't because it never gives me the option. I've tried disabling launcherpro, undoing the root, undoing the lagfix, formatting and wiping user data on the phone, still nada. I've tried all usb modes. Nada.
First things first, can someone explain to me exactly what I should do in device manager to get the drivers in order? I'm pretty sure this is the root of my problem. Any idea on how to get rid of the erroneous drivers that are causing the driver setup to fail?
Any help would be great :S
Click to expand...
Click to collapse
kies or mass storage?
for kies debugging in settings>aplications must be disabled. i dont remember what works better ask on connection or to have connection type preset in settings>applications>usbsettings. im on froyo which works a million times better, kies on jf6 was like a 90% fail rate. it just didn't work for me.
for mass storage you need to mount the phone from a message in the notification bar, even if it asks the connection type and you tick mass storage it will not be mounted, you still need to mount from the notification bar.
you can also mount the sdcards from the notification bar in debugging mode which bypasses the connection type setting in settings>applications>usbsettings.
i tend to leave debugging on in case i need adb to fix my phone, i only turn it off to use kies which is useful to fix my contacts when i have multiples (it's alot easier to fix 200+ contacts on a computer screen using a mouse and keyboard), or install an update if i choose to run the phone stock.
tried in every combination of modes, cant get it connect any possible way. I also dont get the option to mount it from the notification bar so perhaps I have a hardware issue.
Are you using the stock usb cable? I've had problems with some but not all generic cables.
Sent from my SAMSUNG-SGH-I897 using XDA App
may not be what you want to hear
I actually had a similar problem, though not the same. My phone charges and I can use mass storage without issue, but I could not get Odin One Click updaters to ever "see" my phone. I tried every USB port on my box, tried several different driver sets (including the ones DG recommends). Eventually, I tried on a different computer. Odin saw it fine, updated no problems, first time out of the gate.
I know, I know, not everyone has access to two computers, and furthermore there "should" be no reason it can't work on a particular one, but for me, short of formatting my PC and reinstalling OS, I tried everything else I could think of.
Good luck, either way!
post moved to new thread
I don't think there should be a logical reason as to why this would ever work, but Windows (and computers in general sometimes) has a tendency to surprise me like that... but what if you try removing the drivers by whatever automatic means you are provided with, and then check and remove them manually (if necessary), and finally run CCleaner or some other program with registry cleaning capabilities to give your PC that last little enema.
Then use DG's drivers and install them in whatever way he recommends (been a while since I installed the drivers). That's really all I can think of on the PC side... maybe putting a cheap little USB hub between your phone and your PC if you have one laying around as another mostly futile attempt.
Fair warning, it is possible for CCleaner to mess up your PC... any program that messes with the registry can potentially do so. I've never seen the program cause harm, but it is possible.
I've had the same problem with my Crappy from day one. I still somehow got SuperOneClick to Root my phone through multiple attempts. But if all you need to do is transfer files from your phone to PC, and vice versa. I would recommend Android Sync Manager. It can read most of the file systems in the phone, and transfers at a decent speed.
same here
One of my PCs recognizes Cappy with the same cable, OS, drivers. Other one doesn't.
So I ended up using "ADB Wireless" from Market. It works pretty good, slower than USB, but works.
Also - if you are willing to make your PC work - try fresh reinstall of Windows 7SP1 and disable driver update from Internet.
Since your just trying to put music and pictures on the phone, try Kies Air from the market. Install it on your phone then you can transfer files wirelessly with the browser from your computer.
USB Cable
gbrown2036 said:
Are you using the stock usb cable? I've had problems with some but not all generic cables.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Definitely check the USB cable. I had this exact issue before. I checked drivers, did a bunch of un-installing and manual installing of drivers. Finally I tried my stock USB cable and all worked perfectly!
Searched many a thread and can't find an answer to this. I've been able to successfully switch back and forth between USB charging and mounting the phone as a disk drive. I literally haven't changed anything important on my phone or computer today; I think I remember uninstalling a task manager this morning but that's about it. But this afternoon plugged it in, and the pop up asking what method to use (charging/sync/disk mount etc) came up as usual, (I have charging as default) and selected USB disk drive, and nothing changed! My laptop made the usual disconnecting/plugging in noise it makes when you put something in the USB ports, but this time my disk drive didn't automatically pop up. Instead, I was greeted with a "USB Device not recognized" message. What the hell?
Tried restarting the computer and phone several times, same results. Tried with debugging mode enabled and disabled; tried pulling the battery/sim/sd card out; the pop-up asking which USB method to use comes up everytime on my phone when I plug it in, but if I have disk drive selected it only charges.
Using Win7 64bit, I then tried to try uninstall and reinstall the HTC Sync drivers by going into "Uninstall Programs" on my computer and manually uninstalling both the "HTC BMP USB Driver" and the "HTC Driver Installer" that remain on my computer from when I rooted. When I tried clicking on and uninstalling either of them, I get a pop up error saying "Error opening installation log file. Verify that the specified log file location exists and is writable." No idea what that means. I decided to try re-installing HTC sync, and then uninstalling HTC sync, hoping that the reinstallation would fix the drivers. Well now, I have HTC sync on my computer and that too now is uninstallable, it too gives me the "error opening installation log file" error when I try and uninstall it.
PLEASE HELP ANYONE?!!?
ManImCool said:
Searched many a thread and can't find an answer to this. I've been able to successfully switch back and forth between USB charging and mounting the phone as a disk drive. I literally haven't changed anything important on my phone or computer today; I think I remember uninstalling a task manager this morning but that's about it. But this afternoon plugged it in, and the pop up asking what method to use (charging/sync/disk mount etc) came up as usual, (I have charging as default) and selected USB disk drive, and nothing changed! My laptop made the usual disconnecting/plugging in noise it makes when you put something in the USB ports, but this time my disk drive didn't automatically pop up. Instead, I was greeted with a "USB Device not recognized" message. What the hell?
Tried restarting the computer and phone several times, same results. Tried with debugging mode enabled and disabled; tried pulling the battery/sim/sd card out; the pop-up asking which USB method to use comes up everytime on my phone when I plug it in, but if I have disk drive selected it only charges.
Using Win7 64bit, I then tried to try uninstall and reinstall the HTC Sync drivers by going into "Uninstall Programs" on my computer and manually uninstalling both the "HTC BMP USB Driver" and the "HTC Driver Installer" that remain on my computer from when I rooted. When I tried clicking on and uninstalling either of them, I get a pop up error saying "Error opening installation log file. Verify that the specified log file location exists and is writable." No idea what that means. I decided to try re-installing HTC sync, and then uninstalling HTC sync, hoping that the reinstallation would fix the drivers. Well now, I have HTC sync on my computer and that too now is uninstallable, it too gives me the "error opening installation log file" error when I try and uninstall it.
PLEASE HELP ANYONE?!!?
Click to expand...
Click to collapse
So you tried reinstalling it without trying to uninstall first, as in, installing *over* the current installation?
Is the version you're trying to install the newest one available?
You're logged in/running as admin, right?
Have you tried tracking down the installation log file it's having a problem with, as in, where it's looking for it/why it's not finding it in whatever location it's expecting it?
Sounds like the typical cryptic Windows bull**** that drives me nuts when it happens.
Just throwing some other ideas out there. I haven't run into this type of trouble since I've been on win 7 64bit, its actually been better with these types of problems than previous versions of Windows.
I have had this happen once. A restart of the phone solved it for me. If you have a card reader for the SD card, you could see if your computer will recognize it through the reader. It's also possible removing and re-installing the card will fix your issue.
Sent from my Inspire 4G using the power of the dark side.
I was able to finally uninstall HTC Sync, and the two HTC drivers. Then I installed HTC Sync that I downloaded from this site
http://www.htc.com/us/support/inspire-att/downloads
So now my computer has sync and the 2 HTC drivers installed again. Logged in as admin. Have restarted my phone a billion times. It recognizes the micro SD card if I remove it from the phone and put it in a reader.
Have you tried other ports on the laptop? Have you tried other devices in the port you plugged the phone into like a digital camera? Do you have access to a desktop to load the drivers in and see if it mounts? When you load the drivers it will load drivers first then ask you if you want to install htc sync. You can cancel out there and it won't install sync and the drivers will be installed just fine. Find another cable and see if that helps. Those would be what I would try.
Well when something like this happens I resort to rolling the system back to when it worked to see if that fixes things.
If you have system restore enabled roll it back a day and see if that helps. Open control panel in the search type system restore and there you can select it and see if you have any restore points. Restore the system back and see if it fixes it. If not and you tested the ports with another device and tried a different cable there very well could be an issue with the device.
Get a dropbox account and backup what ever you need to that and do a factory reset on the phone would be a last resort. I would keep the phone plugged in to a charger and use wifi for that if it comes down to it. If you are just needing to get something on the phone you can always use dropbox and then a file manager on the phone in the mean time till things get sorted.
I have used an app like this in the past and it works wonders. I hope you have a wifi connection at the house.
https://market.android.com/details?id=com.lyy.softdatacable&feature=search_result
These are all the steps I would have taken if an issue like this arose for me.
Tried all 4 of my USB ports, none of them work. All four of them work with other USB devices. I don't have access to another computer right now to try and see it it'll mount there yet. If it DOES work on another computer, is that better or worse than if it DOESNT? System restore isn't an option, unfortunately.
I'll try a factory reset as a last resort if it doesn't work on another computer. As far as using dropbox, what's wrong with using Titanium backup? Isn't dropbox just for data (which is stored on my SD card, and therefore not affected by a factory wipe/reset?) Or are you saying I need to wipe both my phone and reformat my microSD?
I tried using a different microSD card (that works in a reader) in the Inspire, and it too doesn't recognize the disk drive. Does this narrow down the problem to the phone? Is this a physical problem, or is it something that could potentially be fixed with a wipe and hard reset?
If your computer recognizes the SD cards, then it would seem to be the phone. A full wipe and hard reset is probably the next step. Good luck.
Sent from my Inspire 4G using the power of the dark side.
Tried a hard reset. Well, I went to Settings --> SD & Phone Storage --> Factory data reset --> Reset phone (erase SD card was unchecked)
Same problems. Was this method thorough enough? Or do I need to tinker with completely erasing everything off of the phone including the rom, via clockwork mod recovery?
ManImCool said:
Tried a hard reset. Well, I went to Settings --> SD & Phone Storage --> Factory data reset --> Reset phone (erase SD card was unchecked)
Same problems. Was this method thorough enough? Or do I need to tinker with completely erasing everything off of the phone including the rom, via clockwork mod recovery?
Click to expand...
Click to collapse
I have seen this very issue onllnot only on the Inspire but the captivate as well. Seems windows 7 has an issue with these drivers. What I did to fix it was this. 1. Uninstall all diver related software. 2. Reboot PC. 3. download the driver package from HTC. 4. plug in phone and go to device manager. 5. Manually select the drivers for it. Not saying it will work for you but it did for me when I was running Windows 7 premium 64
zelendel said:
I have seen this very issue onllnot only on the Inspire but the captivate as well. Seems windows 7 has an issue with these drivers. What I did to fix it was this. 1. Uninstall all diver related software. 2. Reboot PC. 3. download the driver package from HTC. 4. plug in phone and go to device manager. 5. Manually select the drivers for it. Not saying it will work for you but it did for me when I was running Windows 7 premium 64
Click to expand...
Click to collapse
Thank you, but can you please elaborate and be a little more specific on steps 3-5? I don't want to download the wrong driver package... is it this one? http://www.htc.com/us/support/inspire-att/downloads
And how do I manually select the drivers in device manager... how do I know what drivers to select? Thanks!
By any chance have you tried a different cable?
I've had this issue when I used cheap cable I got on eBay. It would still charge the phone but my laptop wouldn't see it. Tried a different cable and issue was gone.
Sent from my Inspire 4G using XDA App
I actually haven't been able to test the simplest solution by trying a different cable yet, since this is my first phone with microUSB ( I have approximately 759247892 miniUSB cables lying around the house from my past 10 HTC phones) so I only have the one microUSB cable. It is the OEM cable that comes with the wall charger though, but it would be sweet if it was just a faulty cable. Are you strongly recommending that I don't buy a cheap one off of ebay, and instead go to a brick and mortar store and buy a ATT/BestBuy/Fry's Electronics/Wherever one for twenty bucks or whatever they are charging these days? I will if I have to, but I'd obviously rather not... would you recommend a specific cable brand off of newegg?
ManImCool said:
I actually haven't been able to test the simplest solution by trying a different cable yet, since this is my first phone with microUSB ( I have approximately 759247892 miniUSB cables lying around the house from my past 10 HTC phones) so I only have the one microUSB cable. It is the OEM cable that comes with the wall charger though, but it would be sweet if it was just a faulty cable. Are you strongly recommending that I don't buy a cheap one off of ebay, and instead go to a brick and mortar store and buy a ATT/BestBuy/Fry's Electronics/Wherever one for twenty bucks or whatever they are charging these days? I will if I have to, but I'd obviously rather not... would you recommend a specific cable brand off of newegg?
Click to expand...
Click to collapse
I think a cheap cable should be fine though the shipping was a little long. I needed a new car charger when I switched from the iPhone and it came with 5 cables. Only one gave me that issue. One note to take into account well maybe it was just the ones I bought but the phone always charged at USB speeds with the cheap cables. If I used the OEM itwould read it as AC and charge much faster
Sent from my Inspire 4G using XDA App
Yeah I had a cheap car charger for this phone for about a week while waiting for the oem htc one to arrive in the mail, and it would charge at usb speeds, it'd ask me if I wanted to disk drive/charge only/etc...plugged into a car. Since then I received my oem car charger and it works great and that slow charging/prompt went away. I guess I'll invest in another cable, I'm bound to need more anyway. Hopefully it's that simple.
Sent from my Desire HD using XDA Premium App
Well, I got a new OEM HTC micro USB cable to test, and I am having the same problems, so it's not the cable.... any other suggestions? Is there any difference in doing a data reset vs going into clockword mod and doing a FULL erase of the device and then reinstalling a rom? I have yet to try testing if it'll work on another computer as well...
I suggest doing a full wipe in cw. Find another computer and load the drivers on that and try it. If it doesn't mount then its the phone and you will have seek att for a replacement
I have this problem and I don't even care anymore...lol gave up on it. Nothing fixed this problem. So I just try insertting the plug multiple times to make it work.
EDIT:
I've tried
Reformatting my computer
Trying it on different operating systems(XP, vista, 7)
3 Different USB cables for smartphones.
Reinstall HTC DRIVER
New SD card and reformatted SD card.
Tried multiple roms
completely re-root the phone.
All these never fixed it. Somethigg must be wrong inside of my phone.
Sent from my Desire HD using XDA App
I would definitely try another computer first. Still does it, full erase on cwm. Still persists, factory reset the darn thing. Finish the process of elimination before factory reset. As I have worked at 2 different Toyota dealers in Memphis, if a car had a problem that had multiple solutions, they would try all the easy solutions first before using the last resort solution. Imo, a factory reset is a last resort solution. If that still doesn't help, restore to stock and s-on the punk, and warranty the thing out. It sounds more like a phone hardware problem than anything else. Hope it helps!
Sent from my Inspire 4G using XDA App
ZeroRilix said:
I would definitely try another computer first. Still does it, full erase on cwm. Still persists, factory reset the darn thing. Finish the process of elimination before factory reset. As I have worked at 2 different Toyota dealers in Memphis, if a car had a problem that had multiple solutions, they would try all the easy solutions first before using the last resort solution. Imo, a factory reset is a last resort solution. If that still doesn't help, restore to stock and s-on the punk, and warranty the thing out. It sounds more like a phone hardware problem than anything else. Hope it helps!
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Its been 5 months since I got this phone, do I still get my warranty if I S-ON and stock rom. Best to use Hack kit v11 to return to stock?
Sent from my Desire HD using XDA App
I may have found one more thing you could try...
After trying EVERYTHING I could find here on XDA, as well as across the web, I still couldn't get my S3 to connect to my computer. While trying to get mine to work, I discovered that my husband's S3 connected just fine, nixing the thought that it was computer related. I exchanged mine for a new phone, got it home, and it still didn't connect.
Several hours of troubleshooting later, I had it narrowed down that it worked immediately after a factory reset (while still connected to the computer), but BEFORE the setup wizard got to the Backup Assistant (where it was no longer visible in My Computer). SO, I reset it again, skipped out of the setup wizard as soon as I could, and bada-bing! It works! I discovered after the fact that my husband (whose connected so beautifully from the get go) had backed out of his setup wizard during initial setup, so it definitely could be more than just a one phone fix.
I'll be the first to admit that I'm a total newb to pretty much everything in this forum, so there may be a more knowledgeable person who could be able to pinpoint exactly why the setup wizard would prevent the MTP driver from working properly. At this point, I'm just happy it works, and wanted to put this out there in case there may be anyone else at their wits end.
I had to install kies before it worked properly for me and now i still have to plug in phone then unplug and plug back in before pc see's my phone.
Sent from my SPH-L710 using xda premium
jbadboy2007 said:
I had to install kies before it worked properly for me and now i still have to plug in phone then unplug and plug back in before pc see's my phone.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Yeah, installing, uninstalling and re-installing Kies did nothing for my phones (first or second). I tried it all -- different usb ports on the computer, battery pull, reboot the phone, reboot the computer, install the drivers, uninstall the drivers, try it with usb debugging checked, try it all again with usb debugging unchecked, with an sd card, without one, with a sim card, without one, factory reset not connected and then factory reset connected. Even tried it all again on a separate computer running Windows 7 vs Vista. Finally, in the middle of a factory reset, I saw the magic words "Installed Successfully", but then it stopped working after I finished the setup wizard. Again, I have NO idea why the setup wizard would cause it not to work, but that was what I had narrowed it down to. I'm just glad to have it working!
Verizon Galaxy S3 USB Solution for Win 7 32bit
Micheliu said:
I may have found one more thing you could try...
After trying EVERYTHING I could find here on XDA, as well as across the web, I still couldn't get my S3 to connect to my computer. While trying to get mine to work, I discovered that my husband's S3 connected just fine, nixing the thought that it was computer related. I exchanged mine for a new phone, got it home, and it still didn't connect.
Several hours of troubleshooting later, I had it narrowed down that it worked immediately after a factory reset (while still connected to the computer), but BEFORE the setup wizard got to the Backup Assistant (where it was no longer visible in My Computer). SO, I reset it again, skipped out of the setup wizard as soon as I could, and bada-bing! It works! I discovered after the fact that my husband (whose connected so beautifully from the get go) had backed out of his setup wizard during initial setup, so it definitely could be more than just a one phone fix.
I'll be the first to admit that I'm a total newb to pretty much everything in this forum, so there may be a more knowledgeable person who could be able to pinpoint exactly why the setup wizard would prevent the MTP driver from working properly. At this point, I'm just happy it works, and wanted to put this out there in case there may be anyone else at their wits end.
Click to expand...
Click to collapse
Well, after reading about a dozen posts and so-called fixes. It all boiled down to uninstalling the Samsung Driver & Kies (if you installed separately). This def works for Verizon SCH-I535 Galaxy S3 16MB with 4.0.4 load.
1. Uninstall Kies, Uninstall Samsung Driver, reboot. Reboot your phone just to be safe.
2. On your S3 select Settings-->Developer-->Enable USB Debugging (hit ok at the prompt). Don't tweak anything else here. You MUST have the Debugging turned on for phone to connect to PC.
3. Plug-in the Samsung USB cable to PC (there was some discussion on which USBs work and which don't ... so you can try different USB ports if #4 fails to work below)
4. Windows will then install whatever driver(s) it needs and whala, you can now access your S3 via Explorer...it will show up as a phone, not an actual drive.
Hope this helps and saves you the time and frustration I experienced. I never saw the little USB icon on the S3 until I wiped all the Samsung and Kies drivers from my Win 7 system & enabled debugging on phone. So the issue lies with Samsung and their crappy Kies tool...their driver does not work for S3 (i.e., the standalone download that Version posts on their site). Go with the Windows Update driver (which is auto) and you should now be able to connect via USB to your S3. Again, this works for Win 7 32bit with Android 4.0.4.
-Cheers!
I have an old pc running xp. Nothing worked until I installed kies on both the phone and the pc. YMMV.
Sent from my SCH-I535 using xda app-developers app