Database Info

[Q] Ready to toss Captivate out the window HEEEEEEELPPPPP Please!!!!!

So I'm ready to return this phone and switch to Verizon and a Droid X
Problem 1: No matter what I try I cannot get this phone to connect to my laptop or PC I have probably spent almost 6-10 Hours trying to do this.
Problem 2: This is no where near the concern of problem one but it's annoying as hell, following many of the users advice in order to sync my contacts I used a gmail account and it synced 750 of my "contacts" while most of those 750 are worthless to me I have about 210 or so I actually need. So in order to fix this I created a new gmail account and only copied the contacts I needed as a .csv and synced now I can't get rid of the contacts from the original sync without restoring the phone or so it says.
Setup 1: Laptop Dell Lattitude D630 with Windows XP 32bit SP3 and .net frame work 4. I have tried almost everything. Tried using Kies, Updating Kies, Reinstalling Kies, Reinstalling Drivers, Tried ever driver out there, backdating and redoing it all over again etc. tried different USB Cables the closest I ever got was where it would say Connecting ( displayed in KIES ) and would eventually time out.
Setup 2: Desktop Windows XP SP3 32 Bit .net frame work 4 basically ran down the same thing on the desktop as well except for trying the original USB cable going to try that tomorrow
With both setups I can't get either to connect or even mount the drive in debug mode so I can;t even root this piece of garbage.
IS it me? Am I doing something wrong? If so call me an idiot and tell me how to fix it. I'm open to try anything at this point as this is more frustrating then using that piece of garbage Tilt 2 I had before this.
Please oh geniuses of XDA HALP!
If you have any questions please ask or if you think I left something Important out as well

This may or may not help you; however I had to get the official drivers from Samsung and not the ones that people were using - the Galaxy S drivers caused more problems for me. Uninstall, reinstall the proper drivers, reboot. Then reconnect, expand the drivers installation "balloon" and make sure the four drivers necessary install correctly. I kept having a problem with the USB Mass Storage Driver - but the second time got it.
On the phone, switching from Samsung Kies to USB Mass Storage then enabling USB Debugging and connecting directly to my machine(s) solved most of my probs. I'm using the original USB cable; but to be honest not too sure that would make a difference - just don't go too cheap - I'm also using the Nokia N810 microUSB cable without issues.
Not 100% sure that will help you, but I also had some troubles initially. Don't fret. And good luck.

I just went through exactly the same ordeal you describe with a Win XP machine.
I eventually got it to work, here's what I did:
1. I Downloaded and installed in the following order:
A. Windows Installer 4.5 ... reboot
B. .NET Compact Framework 3.5 redistributable ... reboot
C. .NET Framework 4.0 redistibutable ... reboot
D. Windows XP sp3 ... reboot
After that I downloaded the drivers from the Samsung site, installed them and prepped my phone by putting it in mass storage mode, and turning debugging on.
After another reboot, I connected my phone, waited and prayed ... and it worked. It was a rather long wait as I watched it install the drivers ... be patient.
I think the prayer is what eventually worked ...

ekasey said:
So I'm ready to return this phone and switch to Verizon and a Droid X
Problem 1: No matter what I try I cannot get this phone to connect to my laptop or PC I have probably spent almost 6-10 Hours trying to do this.
Problem 2: This is no where near the concern of problem one but it's annoying as hell, following many of the users advice in order to sync my contacts I used a gmail account and it synced 750 of my "contacts" while most of those 750 are worthless to me I have about 210 or so I actually need. So in order to fix this I created a new gmail account and only copied the contacts I needed as a .csv and synced now I can't get rid of the contacts from the original sync without restoring the phone or so it says.
Setup 1: Laptop Dell Lattitude D630 with Windows XP 32bit SP3 and .net frame work 4. I have tried almost everything. Tried using Kies, Updating Kies, Reinstalling Kies, Reinstalling Drivers, Tried ever driver out there, backdating and redoing it all over again etc. tried different USB Cables the closest I ever got was where it would say Connecting ( displayed in KIES ) and would eventually time out.
Setup 2: Desktop Windows XP SP3 32 Bit .net frame work 4 basically ran down the same thing on the desktop as well except for trying the original USB cable going to try that tomorrow
With both setups I can't get either to connect or even mount the drive in debug mode so I can;t even root this piece of garbage.
IS it me? Am I doing something wrong? If so call me an idiot and tell me how to fix it. I'm open to try anything at this point as this is more frustrating then using that piece of garbage Tilt 2 I had before this.
Please oh geniuses of XDA HALP!
If you have any questions please ask or if you think I left something Important out as well
Click to expand...
Click to collapse
You're better off with an iPhone iOS4. Getting the Droid X is just as complicated, it's just how a Android is. You got to learn to use it before it gets powerful.
On a side note, if you do what the above posters are telling you to do, then I hope you love your Captivate as much as I love mine.
Best damn phone I have ever had. Have not had one real problem with it.
But please, read through the android development stickies, there are so many tutorials you just need to follow.
Download the Drivers you need, 32 or 64 bit what ever you need.

gerbick said:
This may or may not help you; however I had to get the official drivers from Samsung and not the ones that people were using - the Galaxy S drivers caused more problems for me. Uninstall, reinstall the proper drivers, reboot. Then reconnect, expand the drivers installation "balloon" and make sure the four drivers necessary install correctly. I kept having a problem with the USB Mass Storage Driver - but the second time got it.
On the phone, switching from Samsung Kies to USB Mass Storage then enabling USB Debugging and connecting directly to my machine(s) solved most of my probs. I'm using the original USB cable; but to be honest not too sure that would make a difference - just don't go too cheap - I'm also using the Nokia N810 microUSB cable without issues.
Not 100% sure that will help you, but I also had some troubles initially. Don't fret. And good luck.
Click to expand...
Click to collapse
Can you link me to the Driver set you used? I have tried the captivate drivers, the T mobile Versions as well, along with a the generic Galaxy S drivers
Battlehymn said:
I just went through exactly the same ordeal you describe with a Win XP machine.
I eventually got it to work, here's what I did:
1. I Downloaded and installed in the following order:
A. Windows Installer 4.5 ... reboot
B. .NET Compact Framework 3.5 redistributable ... reboot
C. .NET Framework 4.0 redistibutable ... reboot
D. Windows XP sp3 ... reboot
After that I downloaded the drivers from the Samsung site, installed them and prepped my phone by putting it in mass storage mode, and turning debugging on.
After another reboot, I connected my phone, waited and prayed ... and it worked. It was a rather long wait as I watched it install the drivers ... be patient.
I think the prayer is what eventually worked ...
Click to expand...
Click to collapse
Will Give it a Try
SlimJ87D said:
You're better off with an iPhone iOS4. Getting the Droid X is just as complicated, it's just how a Android is. You got to learn to use it before it gets powerful.
On a side note, if you do what the above posters are telling you to do, then I hope you love your Captivate as much as I love mine.
Best damn phone I have ever had. Have not had one real problem with it.
But please, read through the android development stickies, there are so many tutorials you just need to follow.
Download the Drivers you need, 32 or 64 bit what ever you need.
Click to expand...
Click to collapse
I don't use Apple products, but thanks.
It's not that the Software or procedures are beyond my scope of intellect. It seems that every stickied thread I have read on here has 11 different ways of doing the same thing, and not one process works the same for everyone.
Like I said I'm not opposed to trying anything at this point or starting from scratch I just figured it would be a little bit less confusing.
I guess I assumed it would be
DL Software > Install Drivers and Software > plug in phone and magic it works haha.
So far I love the phone besides the fact that it had an SMS error the other day and Deleted all of my texts, the audio jack has become flakey, and the gmail app has consistent errors. OH and I'm missing text messages from people

Drivers are here: http://www.samsung.com/us/consumer/...ATT/index.idx?pagetype=prd_detail&tab=support

Battlehymn said:
Drivers are here: http://www.samsung.com/us/consumer/...ATT/index.idx?pagetype=prd_detail&tab=support
Click to expand...
Click to collapse
Thanks wanted to be sure, I had tried those on the laptop, I will try them tomorrow along with the other suggestions. Wish I had an office job like I used to then I would screw with it at work.

To fix the contacts, turn off the contact syncing, dowload Contact Remover from Market, run Contact Remover and select all contacts then delete. Now you can turn contact sync back on and you should be all set.
Sent from my SAMSUNG-SGH-I897 using XDA App

you could try simpler first - try to connect without Kies;
1. Phone ->settings->applications->usb settings -> ask on connection
2. Install drivers - I installed the AT&T captivate drivers, then the Samsung Drivers
3. Connect phone - if the screen is unlocked, you should see an option for which USB setting you want
4. Pick Mass storage
5. You should see one or two new drive letters on your machine (internal and SD card if you have one)
6. Pull down notification bar on phone, click USB, use for files, Mount drive
This will validate that you have the drivers installed without doing everything else that is involved with .Net stuff
You really only need the Captivate AT&T drivers for this part to work.
I have 2 XP machines and I have full functionality without installing Kies.

I probably tried everything as well..... if not more, but kept trying on my Win 7 64bit.
Don't know of which step finally worked but in using the updated version of Kies (Kies_1.5.1.10074_2_6), Samsung cable (non-motherboard port?), Samsung official 64bit USB drivers, unmounting External SD, setting Captivate to "ask preference for USB", and a final deep breath.
I ended up copying the Samsung USB driver folder to an easy to find location (desktop) and while in Kies(probably not necess.) I opened Windows device manager and asked each device error message to search that folder for correct driver one by one. It finally worked. I used Kies for Outlook Contacts, selected and used Media Center for music(had to remount SD before it would be recognized). Haven't used, but tried mass storage, modem(tether) and they were correctly recognized. Good luck!

What finally did it for me, after getting all the drivers to install with the phone in debug mode, was to set it to always ask on connection. It refused to install the mtp driver if I just set it to mass storage and left it there. I have no idea why, as mass storage is what I click when it connects, but it seems happier this way.
Sent from my SAMSUNG-SGH-I897 using XDA App

I had problems with kies and launcher pro. Had to switch back to original launcher for kies to work. Haven't tried in awhile.with both programs getting updates, it may be fixed now. My .02.
Sent from my SAMSUNG-SGH-I897 using XDA App

I had the same problem. .. actually I still have the same problem, however, there are ways to root and enable sideloading without ever hooking up to the computer. Try that out. If you can't find out how to do it, let me know and I'll do a write up.
Rooted Capivate Galaxy S

naplesbill said:
To fix the contacts, turn off the contact syncing, dowload Contact Remover from Market, run Contact Remover and select all contacts then delete. Now you can turn contact sync back on and you should be all set.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks Will do this today.
everything else I will try tonight and let you guys know how it goes I will do it on both my laptop and on my PC at the same time.
Thanks so much for all the suggestions guys

I had the same problem with launcher pro, no matter how I tried to connect, unless I was in debug. Switching to the always prompt or whatever took care of that for me.
Sent from my SAMSUNG-SGH-I897 using XDA App

i knw this isnt really helpful but dont throw it out the window send it to me hehehe

I just tried the older cable that was party to all the unsuccessful Kies attempts and got the same error. Tried Samsung cable.....no issues. Odd because that same cable worked fine for EVO 4G and a Motorola device and Moto Phone Tools.
Could be fluke?

Well first off I want to thank everyone for the words of encouragement. I was able to finally get the phone rooted. not 110% sure how I did it but it's now done.
My second issue is now getting Kies to work, all it does is sit there and say connecting device
Thanks again everyone

need help connecting to pc before I go insane

After spending my entire Saturday trying in vain to get my win 7 laptop to recognize my captivate I've decided I need to reach out for some help.
Right when I gore my phone, without too much hassle I did the superoneclick root via my pc with great success. Did the lagfix after that and all was well. Go me right?
I used my phone for a little bit and decided that it was time to but sonera music and pictures on it. This is where it all went wrong.
For background, I have done up to this Point: tried both driver sets that are floating around (and exe and the version most often linked to in help threads with a simple setup file), Ive tried kies, I've tried going into device manager to manually locate the divers. Nada.
At this point the drivers with the setup file will no longer install because the install of the exe screwed up at some point. Windows is only showing the device as us composite hub or as a unknown device. I can sometimes get it to say Samsung android usbb device but it shows that it is in error and it still wot see the phone. Someone else asked me if I had used the mount option when I comes up in my notifications bar which I haven't because it never gives me the option. I've tried disabling launcherpro, undoing the root, undoing the lagfix, formatting and wiping user data on the phone, still nada. I've tried all usb modes. Nada.
First things first, can someone explain to me exactly what I should do in device manager to get the drivers in order? I'm pretty sure this is the root of my problem. Any idea on how to get rid of the erroneous drivers that are causing the driver setup to fail?
Any help would be great :S

Need to try and manually remove three old drivers, then try and re install. Id suggest using the ones design gears posted on his one click back to stock post
Sent from my SAMSUNG-SGH-I897 using XDA App

I snipped this from one of my old posts in the Vibrant section...
For those of you having a problem with Windows 7 recognizing your Vibrant ... here is how I fixed it on my system.
*Note: You do not need to load any special USB drivers for your phone to be recognized in Mass Storage mode in Windows 7.
*Warning: You follow these instructions at your own risk ... no screaming at me if you try it and something gets screwed up!
1) Navigate your way into the Device Manager / Universal Serial Bus Controller
2) Uninstall the device(s) "USB Root Hub" (My system had 2 listed)
3) You will lose mouse and keyboard control (because you just removed the USB Hubs)
4) Reset your PC and allow Windows to boot normally.
5) Go back to the device manager and wait for all of the "!" marks to go away as windows re-installs the USB Hubs and reinitializes all of your devices.
6) Make sure your Vibrant is in mass storage mode and has USB debugging OFF
7) Plug in your Vibrant via the USB cable and be amazed as windows recognizes your device and assigns the drive letters. After you select the mount option on your phone you will have normal access via windows explorer.
Hope this helps some of you out there !!!
~Stresa
Sent from Samsung Vibrant

thanks for the good responses guys but both of those have failed. Odin cant even see my phone, same issue with superoneclick root. I even just tried on an enitrely different PC and got the same "device could not start" message.
tried deleting all the drivers for the USB devices. nada. still no connection

Subrock said:
After spending my entire Saturday trying in vain to get my win 7 laptop to recognize my captivate I've decided I need to reach out for some help.
Right when I gore my phone, without too much hassle I did the superoneclick root via my pc with great success. Did the lagfix after that and all was well. Go me right?
I used my phone for a little bit and decided that it was time to but sonera music and pictures on it. This is where it all went wrong.
For background, I have done up to this Point: tried both driver sets that are floating around (and exe and the version most often linked to in help threads with a simple setup file), Ive tried kies, I've tried going into device manager to manually locate the divers. Nada.
At this point the drivers with the setup file will no longer install because the install of the exe screwed up at some point. Windows is only showing the device as us composite hub or as a unknown device. I can sometimes get it to say Samsung android usbb device but it shows that it is in error and it still wot see the phone. Someone else asked me if I had used the mount option when I comes up in my notifications bar which I haven't because it never gives me the option. I've tried disabling launcherpro, undoing the root, undoing the lagfix, formatting and wiping user data on the phone, still nada. I've tried all usb modes. Nada.
First things first, can someone explain to me exactly what I should do in device manager to get the drivers in order? I'm pretty sure this is the root of my problem. Any idea on how to get rid of the erroneous drivers that are causing the driver setup to fail?
Any help would be great :S
Click to expand...
Click to collapse
kies or mass storage?
for kies debugging in settings>aplications must be disabled. i dont remember what works better ask on connection or to have connection type preset in settings>applications>usbsettings. im on froyo which works a million times better, kies on jf6 was like a 90% fail rate. it just didn't work for me.
for mass storage you need to mount the phone from a message in the notification bar, even if it asks the connection type and you tick mass storage it will not be mounted, you still need to mount from the notification bar.
you can also mount the sdcards from the notification bar in debugging mode which bypasses the connection type setting in settings>applications>usbsettings.
i tend to leave debugging on in case i need adb to fix my phone, i only turn it off to use kies which is useful to fix my contacts when i have multiples (it's alot easier to fix 200+ contacts on a computer screen using a mouse and keyboard), or install an update if i choose to run the phone stock.

tried in every combination of modes, cant get it connect any possible way. I also dont get the option to mount it from the notification bar so perhaps I have a hardware issue.

Are you using the stock usb cable? I've had problems with some but not all generic cables.
Sent from my SAMSUNG-SGH-I897 using XDA App

may not be what you want to hear
I actually had a similar problem, though not the same. My phone charges and I can use mass storage without issue, but I could not get Odin One Click updaters to ever "see" my phone. I tried every USB port on my box, tried several different driver sets (including the ones DG recommends). Eventually, I tried on a different computer. Odin saw it fine, updated no problems, first time out of the gate.
I know, I know, not everyone has access to two computers, and furthermore there "should" be no reason it can't work on a particular one, but for me, short of formatting my PC and reinstalling OS, I tried everything else I could think of.
Good luck, either way!

post moved to new thread

I don't think there should be a logical reason as to why this would ever work, but Windows (and computers in general sometimes) has a tendency to surprise me like that... but what if you try removing the drivers by whatever automatic means you are provided with, and then check and remove them manually (if necessary), and finally run CCleaner or some other program with registry cleaning capabilities to give your PC that last little enema.
Then use DG's drivers and install them in whatever way he recommends (been a while since I installed the drivers). That's really all I can think of on the PC side... maybe putting a cheap little USB hub between your phone and your PC if you have one laying around as another mostly futile attempt.
Fair warning, it is possible for CCleaner to mess up your PC... any program that messes with the registry can potentially do so. I've never seen the program cause harm, but it is possible.

I've had the same problem with my Crappy from day one. I still somehow got SuperOneClick to Root my phone through multiple attempts. But if all you need to do is transfer files from your phone to PC, and vice versa. I would recommend Android Sync Manager. It can read most of the file systems in the phone, and transfers at a decent speed.

same here
One of my PCs recognizes Cappy with the same cable, OS, drivers. Other one doesn't.
So I ended up using "ADB Wireless" from Market. It works pretty good, slower than USB, but works.
Also - if you are willing to make your PC work - try fresh reinstall of Windows 7SP1 and disable driver update from Internet.

Since your just trying to put music and pictures on the phone, try Kies Air from the market. Install it on your phone then you can transfer files wirelessly with the browser from your computer.

USB Cable
gbrown2036 said:
Are you using the stock usb cable? I've had problems with some but not all generic cables.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Definitely check the USB cable. I had this exact issue before. I checked drivers, did a bunch of un-installing and manual installing of drivers. Finally I tried my stock USB cable and all worked perfectly!

[Q] Trouble connecting with usb to computer

First of all, my wife and I have the same phones, both stock infuse, bought the same day. I can connect her's to computer via usb and computer immediately will recognize it as an additional drive, including the sd card as another. I am able to do anything I want with it (with or without debugging enabled). So drivers and everything else is ok. When I plug mine in, (same cable, same port), it only charges and does not even acknowledge it is there, even in device manager, not there, with or without debugging enabled). I have disabled my Lookout and AVG. Any suggestions on changing any of the setting on the phone that I could have tinkered with and not realized it? Both are stock unrooted phones. I called ATT who advised to do a master reset. I would really like to try about anything else first. Any help appreciated. Thanks.

emrmcrn said:
First of all, my wife and I have the same phones, both stock infuse, bought the same day. I can connect her's to computer via usb and computer immediately will recognize it as an additional drive, including the sd card as another. I am able to do anything I want with it (with or without debugging enabled). So drivers and everything else is ok. When I plug mine in, (same cable, same port), it only charges and does not even acknowledge it is there, even in device manager, not there, with or without debugging enabled). I have disabled my Lookout and AVG. Any suggestions on changing any of the setting on the phone that I could have tinkered with and not realized it? Both are stock unrooted phones. I called ATT who advised to do a master reset. I would really like to try about anything else first. Any help appreciated. Thanks.
Click to expand...
Click to collapse
Is everything on the two phones the same?
Is there an app that you are running that did something to USB recognition?
Sometime a simple reboot may clear the issue. I did not see you listed that.
Have you tried taking our a microSD and reboot to see if that fixes the problem?
You can also boot into Samsung 3e recovery (see my sig link) and clear just the cache, then reboot.
Obviously, if you do a master reset, take off your photos and important data by copying then using my files to a microsd and take it out before the reset. Reseting in the phone will erase everything.
I think yours may be a hardware issue though, try brushing the USB contact with a toothbrush or some sort of minimal rubbing alcohol
If nothing works, i think you'll be getting a new phone

I do have some extra apps that she doesn't, handcent, flashlight, scanner radio slacker, soundhound, and a few more, but nothing that should affect the usb. I have tried rebooting with and without sd card. Even tried to reboot while holding in vol up and down button at same time and cleared cache that way then rebooted. I searched for Samsung 3e recovery, but didn't find anything that really relates to what I'm looking for. All I found dealt with if phone was rooted. I did try cleaning out the port also. So far, no luck. But thanks for the suggestions.

I am sure this will sound odd... but have you tried it on another PC? It may be a recognition issue with the device drivers and the phone that isn't working.
Just my 2¢

[Verizon] If you're still having MTP driver/USB connection problems...

I may have found one more thing you could try...
After trying EVERYTHING I could find here on XDA, as well as across the web, I still couldn't get my S3 to connect to my computer. While trying to get mine to work, I discovered that my husband's S3 connected just fine, nixing the thought that it was computer related. I exchanged mine for a new phone, got it home, and it still didn't connect.
Several hours of troubleshooting later, I had it narrowed down that it worked immediately after a factory reset (while still connected to the computer), but BEFORE the setup wizard got to the Backup Assistant (where it was no longer visible in My Computer). SO, I reset it again, skipped out of the setup wizard as soon as I could, and bada-bing! It works! I discovered after the fact that my husband (whose connected so beautifully from the get go) had backed out of his setup wizard during initial setup, so it definitely could be more than just a one phone fix.
I'll be the first to admit that I'm a total newb to pretty much everything in this forum, so there may be a more knowledgeable person who could be able to pinpoint exactly why the setup wizard would prevent the MTP driver from working properly. At this point, I'm just happy it works, and wanted to put this out there in case there may be anyone else at their wits end.

I had to install kies before it worked properly for me and now i still have to plug in phone then unplug and plug back in before pc see's my phone.
Sent from my SPH-L710 using xda premium

jbadboy2007 said:
I had to install kies before it worked properly for me and now i still have to plug in phone then unplug and plug back in before pc see's my phone.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Yeah, installing, uninstalling and re-installing Kies did nothing for my phones (first or second). I tried it all -- different usb ports on the computer, battery pull, reboot the phone, reboot the computer, install the drivers, uninstall the drivers, try it with usb debugging checked, try it all again with usb debugging unchecked, with an sd card, without one, with a sim card, without one, factory reset not connected and then factory reset connected. Even tried it all again on a separate computer running Windows 7 vs Vista. Finally, in the middle of a factory reset, I saw the magic words "Installed Successfully", but then it stopped working after I finished the setup wizard. Again, I have NO idea why the setup wizard would cause it not to work, but that was what I had narrowed it down to. I'm just glad to have it working!

Verizon Galaxy S3 USB Solution for Win 7 32bit
Micheliu said:
I may have found one more thing you could try...
After trying EVERYTHING I could find here on XDA, as well as across the web, I still couldn't get my S3 to connect to my computer. While trying to get mine to work, I discovered that my husband's S3 connected just fine, nixing the thought that it was computer related. I exchanged mine for a new phone, got it home, and it still didn't connect.
Several hours of troubleshooting later, I had it narrowed down that it worked immediately after a factory reset (while still connected to the computer), but BEFORE the setup wizard got to the Backup Assistant (where it was no longer visible in My Computer). SO, I reset it again, skipped out of the setup wizard as soon as I could, and bada-bing! It works! I discovered after the fact that my husband (whose connected so beautifully from the get go) had backed out of his setup wizard during initial setup, so it definitely could be more than just a one phone fix.
I'll be the first to admit that I'm a total newb to pretty much everything in this forum, so there may be a more knowledgeable person who could be able to pinpoint exactly why the setup wizard would prevent the MTP driver from working properly. At this point, I'm just happy it works, and wanted to put this out there in case there may be anyone else at their wits end.
Click to expand...
Click to collapse
Well, after reading about a dozen posts and so-called fixes. It all boiled down to uninstalling the Samsung Driver & Kies (if you installed separately). This def works for Verizon SCH-I535 Galaxy S3 16MB with 4.0.4 load.
1. Uninstall Kies, Uninstall Samsung Driver, reboot. Reboot your phone just to be safe.
2. On your S3 select Settings-->Developer-->Enable USB Debugging (hit ok at the prompt). Don't tweak anything else here. You MUST have the Debugging turned on for phone to connect to PC.
3. Plug-in the Samsung USB cable to PC (there was some discussion on which USBs work and which don't ... so you can try different USB ports if #4 fails to work below)
4. Windows will then install whatever driver(s) it needs and whala, you can now access your S3 via Explorer...it will show up as a phone, not an actual drive.
Hope this helps and saves you the time and frustration I experienced. I never saw the little USB icon on the S3 until I wiped all the Samsung and Kies drivers from my Win 7 system & enabled debugging on phone. So the issue lies with Samsung and their crappy Kies tool...their driver does not work for S3 (i.e., the standalone download that Version posts on their site). Go with the Windows Update driver (which is auto) and you should now be able to connect via USB to your S3. Again, this works for Win 7 32bit with Android 4.0.4.
-Cheers!

I have an old pc running xp. Nothing worked until I installed kies on both the phone and the pc. YMMV.
Sent from my SCH-I535 using xda app-developers app

Wont connect to PC and other odd issues

Ok, so I have been having a very annoying issue(s) recently with my SGH-I997R, ( Firmware version 2.3.3, Baseband version I997RUXKG3, Kernel Ver: 2.6.32.7-I997RUXKG3-CL366622)
This all started out of the blue about a month ago, I used to connect my phone to my PC all the time for transferring items via Mass Storage, and then on day when I went to connect it to my same PC, I got " USB Device Not Recognized". It will charge the phone but will not connect or show any option on the phone to connect. I have tried 2 Samsung cables and a generic Micro USB cable, No change. I tried connecting to my laptop, same issue. I re-downloaded the drivers from Samsung onto both my usual PC and Laptop, no change. Very very frustrating.
Other issues, I don't know if their related in any way but they all started at the same time.
a) if I place my phone in airplane mode i cannot get it out of that mode without rebooting my phone
b) if i shut my phone down (doesn't matter if battery shows 100% or 25%) I cannot get the phone to turn on without plugging in the USB cable.
c) When I leave my phone charging overnight and look at it in the morning, battery shows 100% but also shows "NO SERVICE" , I reboot the phone with the cable still connected, service restored.
IF anyone has had these issues Especially the connecting to PC issue, Please PLEASE help. I am going nuts. And of course this all happened 3 months after the warranty expired, so both Rogers and Samsung will not help without $$$$$.

have you tried to back up your data, take out any micro sd card and perform a factory reset under /settings/privacy/reset ?
or open it up and look inside for any problems like corrosion?

qkster said:
have you tried to back up your data, take out any micro sd card and perform a factory reset under /settings/privacy/reset ?
or open it up and look inside for any problems like corrosion?
Click to expand...
Click to collapse
I have done a factory reset numerous times from both the /settings/privacy/reset, and from booting it up holding the volume keys and doing a reset that way.
And I have had my phone since day one in a Ballistic Hard Core Series case, I take it out once a week to ensure its clean and free of dust/moisture (I work in construction so I try to keep it a clean as possible.) and my phone still looks like its brand new.
Thanks for the response though,

Update:
So just as an update for anyone out there who may be able to assist me with this very annoying issue, the Phone is still doing the same things, and since the last post i've also replaced the battery to see if for some strange reason it might help.
But to no avail.
As well I dont think i mentioned that this phone is rooted. I want to try unrooting it to see if that will correct the issue, but with not being able to connect the phone via usb to the computer, I have NO IDEA on how I can accomplish this. Any help???