Hello, I'm using v970 4.1.1 v1.1 MOD by Bruno Martins.
I try to flash it to reorganize partitions (merge cache and phone storage to 2,5 GB and set "external memory" to trully microSD card). Somethings goes wrong :/
After plug in to USB (no battery), it looks like Mediatek Preloader for...2 seconds, after that "device is unplugged". I cant flash phone properly in 2 seconds :/
Any ideas? I'm really tired for installing new drivers, looking for help on polish android support (forum.android.com.pl). Any suggestions welcome
Greetings!
Wat version of windows you're using?
Related
Hello everyone!!! (1st post here, though I sometimes read around)...
I lost my flash disk in my Navman S50 (actually, I messed it up myself: low level formatted it and didn't repartition before restarting S50).
My S50 starts with the little WinCE 5.0 core it has. I can have access to the SD card within my PC (via USB) and within WinCE (via FilemanCE or TotalCommander), but I don't have access to the Flash disk..
How can I recover that (if anyhow)?
No one can help?
I guess nobody can help this time
I guess you can try to do a rom update if you know how..
best of luck with that!
Hy everybody!
I installed the TeamDRH ROM and now i install the G-Harmony, but happening the same problem in the storage and
I follow the guide of TeamDRH. The problems:
1 - In Definitions -> Storage i can't acess all my memory, just the 2GB, the same partition made in NVflash for install the Rom. App2Sd not work, but that's no the bigger problem.
2 - In Definitions -> Storage i can't mount my MicroSd, just not work
3 - My GTablet not was identified in USB on my computer, not acess to Sdcard.
All this problemn just happenig in Rom ICS. I used FlashBack Rom and all storage is right.
I try much times re-install and install NVflash again, I tried all ways but not work
Please if anyone has had this problem or can help me thank you very much.
i did an CWM update and m unable to install stuff from the SD card.
is it somehow possible to force a recovery install from the SD card ?i didn't find a way to do this without a cable....
rootkited said:
i did an CWM update and m unable to install stuff from the SD card.
is it somehow possible to force a recovery install from the SD card ?i didn't find a way to do this without a cable....
Click to expand...
Click to collapse
-----------------------------------------------
i have a similar problem...................
i have stupidly installed aurora V3 screen patch .zip for aurora instead of the ADVANCE ii patch .zip and now i have a white screen which i cannot see anything. :-S
I also have NO mini usb port, i damaged it weeks ago when i dropped tablet off my desk while being plugged in.and the port had snapped pins so i totally removed the otg port and have been using extsd to install my stuff...but now i cannot see the screen to do anything.
What my question is is....CAN WE BOOT OR RESTORE FROM THE EXTSDcard with novo 7 advanced 2?
I have read on another site that the aurora, fire and some other ainol tablets can do this i read something about putting uboot and some other files into extsd and it will do a system format then install new os upon totally on its own without any user input.
This maybe done by a.script being activated from the extsd on startup but im not sure.
I even went and bought a miniHDMI lead to see if i could see the sxreen on my tv. But the firmware probably doesnt support hdmi output because my tv shows " no signal"
Like i said any help would be greatly appreciated.
Ps THIS SITE Kicks *arse!! :-o
Hello I do not necessarily need Zte Nubia Z5S and I accidentally deleted the entire phone so that the phone just stayed CWM based Recovery v6.0.3.7 and still do not have root. I need advice on how to get the rom to sd memory so I can install or talk to do it all over .. I will be grateful for any advice thanks. Sorry for my English .
BigFat271 said:
Hello I do not necessarily need Zte Nubia Z5S and I accidentally deleted the entire phone so that the phone just stayed CWM based Recovery v6.0.3.7 and still do not have root. I need advice on how to get the rom to sd memory so I can install or talk to do it all over .. I will be grateful for any advice thanks. Sorry for my English .
Click to expand...
Click to collapse
In CWM goto mounts and storage and mount usb there, now connect usb with your phone and pc and move the custom rom of your mobile or backup to your sdcard. unmount usb and unplug the usb now install the zip as instructions given by its developer and done!
Sent from my A2 using XDA Free mobile app
Hell_X said:
In CWM goto mounts and storage and mount usb there, now connect usb with your phone and pc and move the custom rom of your mobile or backup to your sdcard. unmount usb and unplug the usb now install the zip as instructions given by its developer and done!
Sent from my A2 using XDA Free mobile app
Click to expand...
Click to collapse
Unfortunately this does not work because cmw based Recovery v6.0.3.7 does not support USB mass storage.
try this is spanish but use a traductor:
http://www.htcmania.com/showthread.php?t=843119
i have a tablet Lenovo ideaTab a1000l-f
512 mb ram
i damaged system files experimental
then the tablet goes to bootloop
i must flash the rom
i read all the ininstructions at xda
i download all the files
the main problem is that
when i connect tablet to the pc there is no reaction at the device management
i can go in recovery mod --> factory reset but bootloops again because i damaged system files
i can go in factory mode --> ?? i can do nothing ??
so how can i solve the main problem
the cable is tested with other devices and the cable is ok
and i am using windows 7 64bit