When I turn on my phone sometimes non of the physical buttons will work, including the power button, so when the screen turns off I have no way to turn it back on. All I can do is pull the battery and wait to see if the next time it starts up it'll work. Using the slide will sometimes turn off the screen but the phone will still act as if the screen is on, so I have to turn it off and back on. And, still, sometimes opening the slide will disable all the physical buttons and I have to pull the battery and hope it will work. And sometimes I don't have to open the slide at all and the buttons will still stop working after a day or a few hours.
I know there has to be a physical problem, but why would the power button work every time when it's already off, but (today) 1 of 6 times after the phone booted up?
Thanks in advance.
GiftigDegen said:
When I turn on my phone sometimes non of the physical buttons will work, including the power button, so when the screen turns off I have no way to turn it back on. All I can do is pull the battery and wait to see if the next time it starts up it'll work. Using the slide will sometimes turn off the screen but the phone will still act as if the screen is on, so I have to turn it off and back on. And, still, sometimes opening the slide will disable all the physical buttons and I have to pull the battery and hope it will work. And sometimes I don't have to open the slide at all and the buttons will still stop working after a day or a few hours.
I know there has to be a physical problem, but why would the power button work every time when it's already off, but (today) 1 of 6 times after the phone booted up?
Thanks in advance.
Click to expand...
Click to collapse
Check your water damage indicator. I've had similar experiences with other phones, specifically one that went for a swim in the toilet. Water damage could explain it.
My other thought was the connector used for the keyboard, but i don't think that would affect the power button or the buttons below the screen.
If you dig through some of the posts, i believe you will find a guide on tearing this phone down. It may give you a good idea of how the device is put together and where to potentially look for failure.
*ninja edit*
Found the teardown guide: http://forum.xda-developers.com/showthread.php?t=1586028
The front buttons (home, menu, back, search and trackpad) are on one ribon cable
The power, volume buttons are on a different ribbon cable
and last the camera button is on it's own cable.
I suspect you have a rom problem if you are lossing all button functionality at once. Have you tried the keyboard home, menu, back, search buttons when it locks up?
I would do a factory reset if you are on the stock rom or reflash the rom you are using.
And if changing firmware/software dosent help know all buttons come down to the main flex
Sent from my Nexus One using xda app-developers app
I was able to buy a used phone and from its and this phone's parts made a working phone. There was a problem with the flex cable that was causing the buttons to stop working when I slid the phone open.
Sent from my myTouch_4G_Slide using xda app-developers app
Related
Searched around for a few hours and I haven't been able to find a solution, so I'm turning to XDA as always.
I was using my phone earlier today, and like always, tried to "sleep" the phone by tapping the power button at the top of my phone. My screen stayed lit and for whatever reason it wouldn't sleep, so I'm trying to figure it out.
I can't deduce if it is a hardware issue or something weird with the software or ROM that I am using. I've never had this issue before, and I'm not sure how to diagnose/fix the issue.
Sliding the keyboard awakes the phone, and I am able to use the touchscreen and keyboard with full functionality, but I am not able to turn off/sleep the phone with the power button. Any and all possible help would be greatly appreciated. Thank you all so much.
does the power button work?
does the phone drift off the sleep when you set it to sleep after 1 min of inactivity?
take out your battery put it in see if u can turn the phone on with the button if u cant its broken.
My Sensation has the Revolution HD3.6.2 by Mike. I started having issues with my sleep button where it would stop responding occasionally until eventually it would stop responding altogether when the phone was on and I could not put to sleep or wake up at all. Now, if I plug into charger with battery out then install battery it will not boot automatically or with holding power button at all. When removing charger it will boot automatically because the phone thinks the power button is always depressed. I have taken the phone case off and cleaned the area many times and it physically clicks normal with no response. I was going to try an updated ROM to see if this was a programming issue however since the phone thinks the power button is always depressed I can not use ROM manager, right when I click down or up it automatically loads that option. The rest of the phone works perfectly and do not want to replace due to a failed sleep/power button, are there options to working around the power button or anything else I should be doing?
Thanks
So I have a bricked Sensation?
ChillOutWayne said:
So I have a bricked Sensation?
Click to expand...
Click to collapse
ok then
It's not bricked. Don't worry software is fine. Sounds like a hardware fault that the power button contact has worn out.
Since the last update it seems that when I try to wake my surface from sleep, often the first press of the power button doesn't wake it and I have to press it again. Doesn't seem to be based on how hard or where I press on the button, and I'm extremely careful with my electronics so it hasn't been dropped or damaged.
Anyone else having this problem?
I've noticed this too, I just assumed it was my device being odd. I've actually thought it was dead and went to plug it in only to have it come on with like 70% battery.
reset it
go to settings->change PC settings->General->Refresh your PC without affecting your files.
i deleted the filed windows.old later and it is all good
pfroo40 said:
Since the last update it seems that when I try to wake my surface from sleep, often the first press of the power button doesn't wake it and I have to press it again. Doesn't seem to be based on how hard or where I press on the button, and I'm extremely careful with my electronics so it hasn't been dropped or damaged.
Anyone else having this problem?
Click to expand...
Click to collapse
its the new firmware...
After the recent upgrade you have to a long press to turn it on...
Same thing happening for me too. Not all the time but some time.
I noticed that it actually works on the first press, but takes some time to do. You just press it a second time before it can start the screen. May be caused by the new update though.
EDIT:
It takes about the same time to wake up like opening the touch/type cover. Maybe it got something to do with that?
1. Could be you're not pressing it firmly enough
2. Are you doing it right after you hibernate/sleep/shut it down? Because it takes a while if you do that.
3. Could be a faulty power button
4. I've had / noticed no problems in delay with the power button (could be it's such a insignificant thing to me that I don't seem to notice it)
I have de same problem since last update
Same Problem here.
I've occasionally seen this on my surface pro too. I think it mainly happens when I close the device and it goes to sleep or whatever and I try to turn it on again pretty quickly. But when you think about it, this is the same way a regular notebook would respond because it is still shutting itself down while you are trying to start it back up. We have just been spoiled with phones and tablets and expect an instant response.
If it is happening from a cold boot, then there might be some type of mechanical issue with your surface, because I've never had that problem.
it depends for me, if it is in sleep mode, clicking it once will wake it immediately, if it is hibernated, you need to hold it a little bit longer, it just behaves exactly like laptop's power button, if it is plugged, pressing once will turn it on too.
I have noticed the power button issue since the last update, I've also noticed my keyboard seems to disconnect as well if I use the device flat..
Same for me, but only if I didn't use it for some time.
Trig0r said:
I have noticed the power button issue since the last update, I've also noticed my keyboard seems to disconnect as well if I use the device flat..
Click to expand...
Click to collapse
This! Sometimes my keyboard goes wild and starts writing the last letter I typed in an endless loop (until I disconnect the touchtype keyboard
me too. to wake the device from deep sleep need a long press.
just a short press or use windows button is required if screen just turned black.
i called microsoft customer care and their devices did it too.
must be result of a recent patch
Do they consider it to be a bug though?
I appear to have trouble with my device's power button. I have a Pantech Sky Vega Racer 2 A830S which I took out of the box after a month in storage. It seemed okay the first few hours, but I started to notice that I could NOT put the phone into sleep when pressing on the power button once. It works like 1/10 presses. Sometimes, it even seems to do an extended hold even after just pressing once since the "power off, restart and sound profiles" popup appears.
Thankfully, the power button isn't doesn't seem to have a problem when the phone is off. When the phone is off, I can turn on the phone 100% of the time. Heck, when I remove the battery for a few minutes and turn on the phone again, the power button functions perfectly and I can sleep and wake with just a single press, no matter how fast I do it. Half an hour later it starts going haywire again. It appears this problem is truly isolated to when the phone is turned on. What could the problem be? It doesn't appear to be the physical power button mechanism. Could it be the battery or something power related shorting the buttons or something? The problem seems to be electrical in nature and I'm at the end of my wits here.
Any advice is appreciated. Thanks in advance.
SymphonyX7 said:
I appear to have trouble with my device's power button. I have a Pantech Sky Vega Racer 2 A830S which I took out of the box after a month in storage. It seemed okay the first few hours, but I started to notice that I could NOT put the phone into sleep when pressing on the power button once. It works like 1/10 presses. Sometimes, it even seems to do an extended hold even after just pressing once since the "power off, restart and sound profiles" popup appears.
Thankfully, the power button isn't doesn't seem to have a problem when the phone is off. When the phone is off, I can turn on the phone 100% of the time. Heck, when I remove the battery for a few minutes and turn on the phone again, the power button functions perfectly and I can sleep and wake with just a single press, no matter how fast I do it. Half an hour later it starts going haywire again. It appears this problem is truly isolated to when the phone is turned on. What could the problem be? It doesn't appear to be the physical power button mechanism. Could it be the battery or something power related shorting the buttons or something? The problem seems to be electrical in nature and I'm at the end of my wits here.
Any advice is appreciated. Thanks in advance.
Click to expand...
Click to collapse
hw button got jammed!!
try cleaning it up
be carefull!!!
Yeah I'd get some can air for computers and spray it. You may just have a piece of dirt lodged in there. In the mean time you could download an app that can put your device to sleep when you click on it I believe.
Sent from my YP-G1 using xda app-developers app
hi
is it possible for the galaxy s3 powre button to stop working? i used a aftermarket battery not sure if it play any part in the dead power button. but want to tell you that too. the power button seem dead to me or something is wrong with it, i take out the battery and put it back and the phone vibrate and a quick flash of the word "samsung" and stay fully dead. it turn on by itself when i insert the battery without pressing the power button. i can do that many times and sometime the phone work and it get to the home screen and all buttons work except for the power button. no matter how hard i press it it wont turn off the screen or anything. anytime i got lucky and it boot to home screen, i plugged in the charger so that way everytime the screen shut off i can turn it back on by unplugging the charger, and that turn it back on... otherwise i cannot turn it back on with the power button...
anyone solved a problem like this power button issue? what could be wrong? i know the phone is not dead ,, so could the powwer button issue trigger multiple issues for the phone?
tainle said:
hi
is it possible for the galaxy s3 powre button to stop working? i used a aftermarket battery not sure if it play any part in the dead power button. but want to tell you that too. the power button seem dead to me or something is wrong with it, i take out the battery and put it back and the phone vibrate and a quick flash of the word "samsung" and stay fully dead. it turn on by itself when i insert the battery without pressing the power button. i can do that many times and sometime the phone work and it get to the home screen and all buttons work except for the power button. no matter how hard i press it it wont turn off the screen or anything. anytime i got lucky and it boot to home screen, i plugged in the charger so that way everytime the screen shut off i can turn it back on by unplugging the charger, and that turn it back on... otherwise i cannot turn it back on with the power button...
anyone solved a problem like this power button issue? what could be wrong? i know the phone is not dead ,, so could the powwer button issue trigger multiple issues for the phone?
Click to expand...
Click to collapse
Seems like I just got this exact same problem! dunno what the deal is. Weird.
tainle said:
hi
is it possible for the galaxy s3 powre button to stop working? i used a aftermarket battery not sure if it play any part in the dead power button. but want to tell you that too. the power button seem dead to me or something is wrong with it, i take out the battery and put it back and the phone vibrate and a quick flash of the word "samsung" and stay fully dead. it turn on by itself when i insert the battery without pressing the power button. i can do that many times and sometime the phone work and it get to the home screen and all buttons work except for the power button. no matter how hard i press it it wont turn off the screen or anything. anytime i got lucky and it boot to home screen, i plugged in the charger so that way everytime the screen shut off i can turn it back on by unplugging the charger, and that turn it back on... otherwise i cannot turn it back on with the power button...
anyone solved a problem like this power button issue? what could be wrong? i know the phone is not dead ,, so could the powwer button issue trigger multiple issues for the phone?
Click to expand...
Click to collapse
i got the phone to work by using app to auto detect sensor and turn on the phone for now
antiseen said:
Seems like I just got this exact same problem! dunno what the deal is. Weird.
Click to expand...
Click to collapse
if you can get it to turn on u can use a app to wake it up by sensor.
Could be related to the 3rd party battery but hard to tell without checking out the internals to see if anything on the PBA got fried.
If you're able to get it to turn on with an app and not able to unlock the screen without use of the charger it may just be somethin to do with your power button itself.
Did anything happen around the time of the issue starting? (New apps, physical or liquid damage, software updates, etc)
Have you tried a known working OEM battery?
Sent from CM 10.2 optimized sph-l710