Database Info

HTC Thunderbolt Issues - Stuck at HTC Logo... Recovery not working, etc...

here is my issue.
2 weeks ago, i rooted my phone. all was well. flashed CWM Recovery 5.0.2.1 for my Thunderbolt. I made a backup just before i rooted so that in case ANYTHING went wrong, it would unroot me and fix any problems. So, here i am, backing up apps with Titanium Backup, and it backed up fine. The next thing i did was start to uninstall HTC Bloatware... I knew which ones were the ones i could remove, plus even if i removed the wrong one, i could just restore using my image backup. After removal, the phone instantly ran better. i had over 65% free memory space... This was all well and good, until i rebooted the phone. the instant i rebooted my phone, i was getting the flashing HTC Quietly Brilliant screen. i had done NOTHING to it to cause this. It would alternate from HTC splash to Thunderbolt animation.
So, knowing what was wrong, (UI not loading) i went to recover my image from CWM. that went fine. but things just got worse. After a successful recovery (according to CWM) i rebooted, but to my surprise, now its worse. its stuck at the HTC boot logo. ALL MANNER OF ROMS DO NOT WORK!!! recoveries, new OS, anything, all the same result. AT LEAST with the thunderstick full blown ROM, i can get back to the looping splash screen, but not any further. i DONT KNOW what is wrong but i am hoping one of you mad phone geniuses out there can get my phone working. i tried getting s-off with revolutionary, but it failed because the phone has to be booted up for it to work, and is something i obviously cant do at this point... relocking the phone made things worse too because i unlocked using the HTCdev method.
This is not a boot loop, as it doesnt loop. it just sits there. i have tried every available resource on this, and other sites. i must have read over 1,000 posts in the past week to try and gather what the devil happened to my phone... If its any help, i did accidently delete the settings storage APK file, but a restore should have fixed that. i want to lock up the phone to send it in for repair but i cant gain s-off to flash a new radio with the phone in its current state. i know how to do all if these things but the phone wont let me.

Reformat the sd card to fat32 and flash an RUU file to put you back to stock.
Sent from my ADR6400L using xda premium

Does your computer recognize your device?
Sent from my ADR6400L using xda app-developers app

i am nearly pulling my hair out...
smtom said:
Reformat the sd card to fat32 and flash an RUU file to put you back to stock.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
any RUU downloads that would have been available on multiupload.com are disabled and redirects to to "the internet vs., holywood". besides, as i said, any attempt to flash any rom no matter what it is fails. Well, technically it FLASHES ok, but doesnt actually work. as far as i know, the phone has 2 bootloaders in any given android phone. There is the primary HTC Bootloader (Hboot) and a secondary ROM UI Bootloader. (Android Boot) i think what has happened is that this part has become corrupted and i wanted to know how to access this and reformat that. supposedly you cant because its partitioned, and formatting the partitions would fix my issue. problem is that i have done all of this. to answer the second reply, yes, i can get the phone to be recognized in any mode as long as its fastboot, or recovery. Fastboot.exe works, and adb recognizes it in recovery as being IN recovery mode. unfortunately, with my device still locked, i cannot flash a new bootloader, which might solve my problem. this is not like any issue currently on XDA so far as i read, so this is why i created a new thread.
I am sure the Moderators will agree that my problem seems to be unique. After reading what seems to be hundreds of forums, i cannot solve the issue. While technically i am a newbie here, i am no stranger to modding phones. i have been at it for over 4 years now. THIS problem is absolutely a first for me. At least before i could restore using CWM, but even that failed. i checked my MD5 Sum for CWM backup and it checked out.
If someone can provide me a link to an ORIGINAL, unmodded, RUU that shipped with the phone, (PRE OTA 2012) that ISNT that stupid file-factory corrupted crap, i would be extremely indebted to that person. last time i used File-factory, it took THREE hours and the download was corrupted according to CWM. it refused to flash the phone even though Chrome said it completely downloaded (Error: Bad - Installation Aborted). There was no MD5 SUM to compare with so thats also another problem. i absolutely need that info to properly flash the phone. All the other ROMS i downloaded like TSGB and Lightning Rom technically flashed fine after a full wipe, but refused to go past their own "Open Mobile" splash screen.
So you see, i am at a loss with this phone, as all i did was reboot after rooting it, and nothing i did could have possibly caused this kind of failure...

cyberkeeper1 said:
any RUU downloads that would have been available on multiupload.com are disabled and redirects to to "the internet vs., holywood". besides, as i said, any attempt to flash any rom no matter what it is fails. Well, technically it FLASHES ok, but doesnt actually work. as far as i know, the phone has 2 bootloaders in any given android phone. There is the primary HTC Bootloader (Hboot) and a secondary ROM UI Bootloader. (Android Boot) i think what has happened is that this part has become corrupted and i wanted to know how to access this and reformat that. supposedly you cant because its partitioned, and formatting the partitions would fix my issue. problem is that i have done all of this. to answer the second reply, yes, i can get the phone to be recognized in any mode as long as its fastboot, or recovery. Fastboot.exe works, and adb recognizes it in recovery as being IN recovery mode. unfortunately, with my device still locked, i cannot flash a new bootloader, which might solve my problem. this is not like any issue currently on XDA so far as i read, so this is why i created a new thread.
I am sure the Moderators will agree that my problem seems to be unique. After reading what seems to be hundreds of forums, i cannot solve the issue. While technically i am a newbie here, i am no stranger to modding phones. i have been at it for over 4 years now. THIS problem is absolutely a first for me. At least before i could restore using CWM, but even that failed. i checked my MD5 Sum for CWM backup and it checked out.
If someone can provide me a link to an ORIGINAL, unmodded, RUU that shipped with the phone, (PRE OTA 2012) that ISNT that stupid file-factory corrupted crap, i would be extremely indebted to that person. last time i used File-factory, it took THREE hours and the download was corrupted according to CWM. it refused to flash the phone even though Chrome said it completely downloaded (Error: Bad - Installation Aborted). There was no MD5 SUM to compare with so thats also another problem. i absolutely need that info to properly flash the phone. All the other ROMS i downloaded like TSGB and Lightning Rom technically flashed fine after a full wipe, but refused to go past their own "Open Mobile" splash screen.
So you see, i am at a loss with this phone, as all i did was reboot after rooting it, and nothing i did could have possibly caused this kind of failure...
Click to expand...
Click to collapse
https://dl.dropbox.com/u/61129367/Stock-ROM.zip
013CBDD3A9B28BC894631008FA2148E2

will this really work??!? lol
trter10 said:
https://dl.dropbox.com/u/61129367/Stock-ROM.zip
013CBDD3A9B28BC894631008FA2148E2
Click to expand...
Click to collapse
If this works, i will be forever grateful. and something that mere Custom ROMS wont do, is repair any boot issues and lock up my phone again right? i hope at least it fixes the issue.

new problem... i think...
cyberkeeper1 said:
If this works, i will be forever grateful. and something that mere Custom ROMS wont do, is repair any boot issues and lock up my phone again right? i hope at least it fixes the issue.
Click to expand...
Click to collapse
ok. so the download finished fine so far as i know, but now CWM says ITS bad too. i will try again but i cant seem to flash any stock rom no matter if its OTA or pre-OTA from CWM. is there a way to flash a rom from the PC via adb or something?

Ohh! They're not flashed through CWM. They're flashed through hboot. Just rename it to PG05IMG.zip and put on SD card and boot to hboot it will ask you to flash
Sent from my ADR6400L using Tapatalk 2

i will try that. previous hboot flashes always fail. it reads the archive, but never goes to "checking zip". it loads, checks, and then parses. i was successful with my evo shift earlier today, but that thing is ancient compared to my thunderbolt. With the Shift, i was able to gain root AND s-off with an old bootloader and i dont even need a new one.
i wanted to do the same with my bootloader in case another disaster hits because then i can flash whatever RUU i want with s-off. i will make sure the MD5 SUM matches before flashing. i forgot to do that anyhow.

Hboot flash failed. went through the motions of scanning it and it scanned the whole thing and then did nothing. it returned me to Boot Choices. Like Fastboot, recovery, etc... i tried twice. are you absolutely certain that is the shipping firmware that formats the entire phone, and not just updates it? i cant send it to verizon even though they know it was illegal to lock up my phone... Anyhow, i realy need this thing working and i have racked my brain enough to damage it already... lol. if it fails again i will try to redownload it. So far it loads and does NOT ask me to start the update. could be a version issue because it does not complain about anything else.

Have you tried following the instructions in the return to stock thread in the android development section stickies? This may help you.
Sent from my ADR6400L using xda app-developers app

lemew said:
Have you tried following the instructions in the return to stock thread in the android development section stickies? This may help you.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
yes i have. i cannot do what it asks because it requires my phone to be functional to flash it using hboot. i need a signed copy of an older RUU. hboot doesnt do anything with it. its a valid copy, and i can see all the images and contents in windows and linux, but all i can get hboot to do is read it, then it doesnt ask me to update. i dont know what to do now.

I believe there is a ruu image without hoot download there.
Sent from my ADR6400L using xda app-developers app
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
Try http://shipped-roms.com/index.php?category=android&model=Mecha
Sent from my ADR6400L using xda app-developers app

ok well i will literally try ALL of the signed images. i will see if hboot will update it.

If your hboot is flashed with revolutionary I believe you have to unlock it before anything thing else can be flashed over that. Hboot or emmc could be corrupted as well.
Sent from my ADR6400L using xda app-developers app

How i fixed my tbolt stuck at the white HTC screen
I had this exact same problem literally yesterday (stuck at HTC screen) with some different cwm symptoms. I'm guessing my cwm was corrupted because the phone would reboot after about 30 seconds being in cwm, preventing me from flashing any roms. oh, and my backup image was corrupted as well. awesome. Flashing other CWMs did not fix the CWM problem.
Your problem sounds similar in the fact the CWM won't flash properly. You're trying to fix it by trying to flash a rom in HBOOT that isn't configured to be flashed that way. for example, i put the skyraider rom (named properly) in the root folder and tried to flash with HBOOT. it scanned and parsed but didn't give me the option to flash.
What I did was go here and grab a stock like image:
androidforums.com/thunderbolt-all-things-root/418539-thunderbolt-root-unroot-thread.html
(won't let me make a link, i'm too new)
Go to the "Putting current stock firmware and s-on back onto the phone" section.
Download file 1 and flash it using HBOOT. I had to pull my sd card to get the file on there since cwm was crashing. Only flash that rom and nothing else. It flashed for me; if it doesn't flash for you then maybe your HBOOT is corrupted, and if so i don't know if you can fix it.
Once that flashes, reboot the phone and it should return to some level of functionality. You'll have S-off but no recovery or root tools installed. I ran revolutionary at this point, which recognized i already had S-off...then it offered to load CWM. This i did. in the meantime i deleted the unrooted image and put the image of the rom i wanted on the sd card. i then booted into recovery(it won't flash in HBOOT) and loaded that rom (skyraider zeus). That worked fine and the cwm didn't crash out.
I hope this works for you. I was getting ready to fire back up my OG droid before i did this.

mpcapps said:
I had this exact same problem literally yesterday (stuck at HTC screen) with some different cwm symptoms. I'm guessing my cwm was corrupted because the phone would reboot after about 30 seconds being in cwm, preventing me from flashing any roms. oh, and my backup image was corrupted as well. awesome. Flashing other CWMs did not fix the CWM problem.
Your problem sounds similar in the fact the CWM won't flash properly. You're trying to fix it by trying to flash a rom in HBOOT that isn't configured to be flashed that way. for example, i put the skyraider rom (named properly) in the root folder and tried to flash with HBOOT. it scanned and parsed but didn't give me the option to flash.
What I did was go here and grab a stock like image:
androidforums.com/thunderbolt-all-things-root/418539-thunderbolt-root-unroot-thread.html
(won't let me make a link, i'm too new)
Go to the "Putting current stock firmware and s-on back onto the phone" section.
Download file 1 and flash it using HBOOT. I had to pull my sd card to get the file on there since cwm was crashing. Only flash that rom and nothing else. It flashed for me; if it doesn't flash for you then maybe your HBOOT is corrupted, and if so i don't know if you can fix it.
Once that flashes, reboot the phone and it should return to some level of functionality. You'll have S-off but no recovery or root tools installed. I ran revolutionary at this point, which recognized i already had S-off...then it offered to load CWM. This i did. in the meantime i deleted the unrooted image and put the image of the rom i wanted on the sd card. i then booted into recovery(it won't flash in HBOOT) and loaded that rom (skyraider zeus). That worked fine and the cwm didn't crash out.
I hope this works for you. I was getting ready to fire back up my OG droid before i did this.
Click to expand...
Click to collapse
I have read that post you provided probably 100 times its not working for me. flashing a custom rom actually got me past the HTC white screen and into a splash screen loop (Open Mobile). Also, I havent even been able to use the REV tool because my phone is not recognized by it without it being fully functional. you have to be fully booted up for the REV tool to use adb and start the process. thats why i need a signed copy of an older ROM with hboot flashing capability so i can fully restore my phone. i am 100% sure its a corruption issue, but i am out of clues as to how to actually get it to flash over while being s-on. with the evo shift it worked perfectly. it only took me 20 minutes to root, s-off and flash a custom rom. this phone has been a thorn in my side ever since i accepted that STUPID FOTA... i regret not knowing before hand what that OTA was and what it prevented. Now i know, too little / too late.
without s-off, i cant unlock hboot to flash it, and the fastboot mw whatever command failed also because its locked tight.

lemew said:
If your hboot is flashed with revolutionary I believe you have to unlock it before anything thing else can be flashed over that. Hboot or emmc could be corrupted as well.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
thats what i thought. is there a way to change out that eMMC, or remove it to format it manually? i mean based on the description, its technically external which implies removable.

Yes you can format emmc I do not know if this will solve your problem. You wipe abd format through adb but need to see if it is being mounted first.
Sent from my ADR6400L using xda app-developers app

lemew said:
Yes you can format emmc I do not know if this will solve your problem. You wipe abd format through adb but need to see if it is being mounted first.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
too bad i cannot repartition it to allow for more RAM instead of app space. i dont care about app space because i have a 32gb card... lol. i just want that phone to be faster than what it is currently once i finally get it running.

RDS Lite Phone return FAIL

RDS lite used stock rom install Error:
falied flashing process.3/20 flash mbmloader ''mbmloader.bin''.Phone return FAIL
Help Please
Thanks

tr.sertac said:
RDS lite used stock rom install Error:
falied flashing process.3/20 flash mbmloader ''mbmloader.bin''.Phone return FAIL
Help Please
Thanks
Click to expand...
Click to collapse
Too little information and rds lite does not exist.

Post the full details here including your base firmware version which rom you tried to flash etc etc
Sent from my MB865 using xda app-developers app

Mui ICS rom install after reboot fail.
RSD tlie used stock rom,error Phone Return Fail
My Phone fastboot Screen
Battery OK
Ok to Program
Transfer Mode:
USB Connected

tr.sertac said:
Mui ICS rom install after reboot fail.
RSD tlie used stock rom,error Phone Return Fail
My Phone fastboot Screen
Battery OK
Ok to Program
Transfer Mode:
USB Connected
Click to expand...
Click to collapse
u tried to flash miui? thats not even for rsd

Was you stock 2.3.5, 2.3.6 or on the ics leak before trying to fxz?
Sent from my MB865 using xda app-developers app

Please search!
Ok, so this is how you fix your issue:
If you want to flash the MiUI ROM you NEED TO BE ON ICS (4.0.4) FIRST!
If you are on Gingerbread (2.3.5 or 2.3.6) the install the ICS leak for YOUR CARRIER.
There are a couple of different types of ICS leaks out there depending on your carrier, install the proper one for your phone.
Once you get on ICS the MiUI ROM is installed the BOOTMENU NOT RSD LITE. It's not even the right file type for RSD lite.
I will not give links as you can find them your self with the search bar. I would personally advise against the MiUI ROM as it is VERY buggy right now, and honestly man, if you don't know what I'm talking about you SHOULDN'T BE MESSING WITH YOUR PHONE.
Especially if you were trying to flash the damn thing through RSD lite... for pete's sake.
READ. SEARCH. RESEARCH.
THEN REPEAT.

+1 well put and agreed.
Sent from my MB865 using xda app-developers app

One thing that I've found...be sure that your USB cable is plugged directly into the computer, and not into a hub. I can do everything through a hub with mine EXCEPT fxz back to stock...and so when I tried and it stuck on the same step that you're on, I (and pretty much everyone else that I asked) was stumped. With all the crap that I tried, it really was something that easy, and yeah, I'll admit it: dumb. There really is a reason that tech support people ask dumb questions to start off with.

I've tried everything but I can not friends.
I installed the ICS Mui and format / Webtop after having had this error please help
"Invalid CG Version" with the stock rom try to install rsd lite Phone Return'' failed'' error.
I do not know what to do

Breathe Fall....
Okay mate, one question at a time.
What are you trying to install? RSD lite is ONLY used for installing fxz files and other various file types.
Sent from my MB865 using xda premium

Sounds like he tried to fxz back and is getting the cg error Jim has a fix for in the stickies.
Sent from my MB865 using xda app-developers app

I bricked my A2 need help plz, ve
hi, Last night i install update file which make me stuck in boot animation, I tried to flash FZX files by RSDlite5.6 but cant proced after satge 2 out of 18, i tried every thing i knew to flash it back but i couldn't, and also I tried to install a rom from recovery ( by holding volume UP and down and press power then recovery then again volume up +down and from option apply update from sccard, and it give me "E:signature verification failed install aborted". please can anyone help me, please.
my device is atrix 2 mb685 ATT
my rom is SCv5

Holy font sizes, Batman.

[Q] maybe i brick my phone

i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?

This whole mess started when you tried to flash MEARET firmware on your AT&T phone. NEVER mix firmware!
And trying recovery at this point is not going to work, as the ICS zip is just a large patch file for 2.3.6. And since it failed on the fxz, a portion of your system is missing so ICS won't install. You need to fxz back.
What step is the script falling at? A screenshot would be helpful.
And for the future, please post questions in the Q&A form.
Sent from my SAMSUNG-SGH-I727 using xda premium

you mean at 3rd step?
sorry.please move this thread at q&a

Yes the script from step three is what's going to save you here.
But we need to know where it's failing at.
Sent from my SAMSUNG-SGH-I727 using xda premium

i can see that problem is with cbt, recovey and cdrom partition.

Uh oh.
Which ICS version did you install? Please show need the thread.
I need to know which leak it was.
Sent from my SAMSUNG-SGH-I727 using xda premium

Blur_Version.55.13.25.MB865.ATT.en.US.zip

Well I hate to tell you man. But you are soft bricked until we find an fxz for ICS.
Recovery and cdrom are failing because cdt.bin isn't flashing. And we haven't found a fix for this yet.
Although the strange thing is that this shouldn't be happening on the first leak... but it is...
So you're bricked mate.
Sent from my SAMSUNG-SGH-I727 using xda premium

ok, i will wait.
thanks.
but please explain to me.i had a motorola a1200 and a siemens sx1.when i flashed a firmware, all the flash memory erased and new data wrote at flash.if i had bootloader, all was fine.the only method to brick a phone was to replace the battery when flash the bootloader(or flash false bootloader).
at A2, why when i write a new bootloader and new mbr(and partition table?) is necessary to flash the same or newer edition of firmware?this is because bootloader is locked?
i thought when i flash a new firmware, all the flash memory erased and writes new data(at the begining the bootloader, after mbr with partition table, after the image(i think this is the kernel of linux) and all other the data)

macnick said:
i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?
Click to expand...
Click to collapse
Use rsdlite and flash the Asian or Chinese stock firmware worked for me when I had this issue now I'm running 4.1.1 cm10 jb and its awesome!
If this works for you hit my thanks button
P.s phone must be in fast boot mode
Sent from my MB865 using XDA Premium HD app

Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...

macnick said:
Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app

macnick said:
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
whiteboi-hakz said:
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!

Fall of Enosis said:
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!
Click to expand...
Click to collapse
Dude it works and he can then reflash his fw so what's the big deal the one I bricked was at&t non international and that method worked great but I'll take your advice man
Sent from my MB865 using XDA Premium HD app

i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)

macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
OK well was worth a try I guess ay try his method and let's us know
Sent from my MB865 using XDA Premium HD app

macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.

Fall of Enosis said:
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.
Click to expand...
Click to collapse
Thanked you as earned it man
Sent from my MB865 using XDA Premium HD app

Bricked....Ugh

Ok so I've been rooted and unlocked for a while now, but stayed with the stock rom as when I tried out Synergy Nightlies it gave me some errors. So I went to try out CleanRom 2.1, people liked it and I didn't notice any flashing errors. So I flashed it through CWM 6.0.1 and it gave me the yellow exclamation mark saying I had unauthorized data on my phone. So I followed the sticky on how to unbrick my phone using the 2 boot loaders and the root66 stock image. My issue is that when running the root66 stock image through Odin it fails at _XmitData_Read, which seems to be somewhere in system.img.ext4. I've tried rebooting the computer, the phone, Odin, it just doesn't work. So when I reboot my phone after the failure I get Odin auto loading saying:
Odin Mode
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Then an image of a phone, 2 dots, a yellow exclamation, 2 dots and a computer are shown with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Anyone able to help me?

can you still get to odin mode? also if you have kies installed on the computer erase it.

kidhudi said:
can you still get to odin mode? also if you have kies installed on the computer erase it.
Click to expand...
Click to collapse
Kies isn't installed on the computer and yes I am still able to get into Odin Mode.

I'm under the impression that "unauthorized software" message comes from the locked bootloader (if I'm wrong about that someone plese correct me.)
Sounds like you're functional enough to be able to Odin back to stock and go from there - that's what I'd try. See the stickied thread in the Q&A forum.

I would run the FULL VRALF stock image through ODIN to return to stock. That is always the safest way out of a sticky situation.

Thanks guys, according to another post the version of EZ-Unlock I used most likely gave a false report and never actually unlocked my phone. The problem with going back to stock, which if what I'm trying to do, is that it fails.

Could be an USB issue - an intermittent connection would be most likely to cause problems while sending the system partition since that's the biggest. I've had problems using adb from time to time if I plug into one of the front-panel ports on my PC but no trouble with one on the back.
Maybe try switching ports or try a different cable ...

Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app

Strange.... i was able to flash syergy on thefirst try. Never used odin during the whole process....
If youre rooted you need to make sure you have a custom recovery in place like cwm or twrp. Make sure you make a nand-backup.
I used casual to flash unsecure bootloader, with that and recovery in place you should be able to flash roms without any hitches....
I could never find a comprehensive guide on using odin so i never got around to testing it

kintwofan said:
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So far I've tried 3 different USB cables and both a desktop, both front and back ports and a laptop, each one fails on the write of XmitData under system.img.ext4
I had a custom recovery installed and Odin is only being used to get me back to a stock rom, otherwise I did all my flashing under CWM 6.0.1 or twrp. I think the whole fake unlocked bootloader just hard bricked the software.
EDIT: Come to think of it I remember waking up to my phone in download mode. I think Verizon tried to install the update to my phone while I was sleeping. Granted it failed at the end, but I'm wondering if that did something to brick me now.

If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app

kintwofan said:
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yea, I'm currently downloading at the speed of slug the newest update from the forums, will probably just redownload at home, since it's going to take over an hour >.<
EDIT:
Does anyone have a link for an older EZ-Unlocker, that is known to work, so that I don't get this problem yet again.

FIXED!
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.

LlirasChosen said:
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
Click to expand...
Click to collapse
I personally suggest not using the app if you already had trouble. Just root your phone using the Debug Root method in Development, download the aboot.img from Adam Outlers thread HERE to your phone, and run the commands at the very bottom in Terminal Emulater app (from the market).
That way you know for sure your bootloader is unlocked. This is what I have done and never had an issue.
Edit: Glad you got your issue resolved!

[Q] Atrix 2 help!

Hi guys!
I tried searching for a similar problem that I have but wasn't able too. So I need your help here.
So I lost my CID, didn't back it up so was using bptools for it when I was on JB leak3.
1) I flashed CM11, 4.4.2 dated 14 Dec after flashing gapps, it removed my recovery and was bootlooping
2) I reflash the same leak3 which used to work earlier using RSDlite. Now the rom isn't booting i.e. it is stuck in it's "pumping logo".
3) I again try reflashing using RSDlite, only this time, it fails and status is shown as battery low in fastboot. Now I connect charger, it boots, stuck in the white screen which is expected since I lost my CID.
So, does this mean that it's charging? If not, am I screwed??

shubham1120 said:
Hi guys!
I tried searching for a similar problem that I have but wasn't able too. So I need your help here.
So I lost my CID, didn't back it up so was using bptools for it when I was on JB leak3.
1) I flashed CM11, 4.4.2 dated 14 Dec after flashing gapps, it removed my recovery and was bootlooping
2) I reflash the same leak3 which used to work earlier using RSDlite. Now the rom isn't booting i.e. it is stuck in it's "pumping logo".
3) I again try reflashing using RSDlite, only this time, it fails and status is shown as battery low in fastboot. Now I connect charger, it boots, stuck in the white screen which is expected since I lost my CID.
So, does this mean that it's charging? If not, am I screwed??
Click to expand...
Click to collapse
If fastboot says low battery then u cant RSD.....
Google Mcgruyver method or externally charge ur battery....( ie if you get a white led )
If your in india it shouldn't be a problem finding an external universal battery charger in any cell shop....

darth_nihar said:
If fastboot says low battery then u cant RSD.....
Google Mcgruyver method or externally charge ur battery....( ie if you get a white led )
If your in india it shouldn't be a problem finding an external universal battery charger in any cell shop....
Click to expand...
Click to collapse
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?

shubham1120 said:
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?
Click to expand...
Click to collapse
Dude if fast boot says low battery RSD wont flash it............whether or not it was charging with a white screen
So u have to externally charge the battery
And from what i know u can't flash ICS once ur on the JB leak ie u can't downgrade so u will have to flash the same leak again......

shubham1120 said:
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?
Click to expand...
Click to collapse
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
darth_nihar said:
Dude if fast boot says low battery RSD wont flash it............whether or not it was charging with a white screen
So u have to externally charge the battery
And from what i know u can't flash ICS once ur on the JB leak ie u can't downgrade so u will have to flash the same leak again......
Click to expand...
Click to collapse
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.

1BadWolf said:
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
I din know u can never tried the leaks coz of AT&T but i read somewhere that it changes or updates
the recovery or bootloader ??
Edit: My bad you can downgrade back to ICS
wangs cn leak said u might not so thats where i read it .....

Deja vu!!
1BadWolf said:
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
Hey!
IDK what was I thinking but I flashed pa 4.4.2 gapps on CM11 by altered and BOOM! Lost recovery and bootloop.
So I re-flashed leak 3 it's now stuck in boot animation("pumping"--again what was I thinking lol!) meaning a softbrick. Why is it happening? I mean is it a bad flash?
Or does it have something to do with leak 3? If so, I can't seem to find ics fxz. The superthread links are dead. My another question is-
Will I be able to us AT&T fxz? Since I've already lost my CID, it shouldn't be a problem right?
PROBLEMS PROBLEMS PROBLEMS!:silly:
Also, can anyone give me the link for asian version of ICS?
EDIT- Was able to boot! went to stock recovery, wiped data and cache partition. Thanks for help guys

shubham1120 said:
Hey!
IDK what was I thinking but I flashed pa 4.4.2 gapps on CM11 by altered and BOOM! Lost recovery and bootloop.
So I re-flashed leak 3 it's now stuck in boot animation("pumping"--again what was I thinking lol!) meaning a softbrick. Why is it happening? I mean is it a bad flash?
Or does it have something to do with leak 3? If so, I can't seem to find ics fxz. The superthread links are dead. My another question is-
Will I be able to us AT&T fxz? Since I've already lost my CID, it shouldn't be a problem right?
PROBLEMS PROBLEMS PROBLEMS!:silly:
Also, can anyone give me the link for asian version of ICS?
EDIT- Was able to boot! went to stock recovery, wiped data and cache partition. Thanks for help guys
Click to expand...
Click to collapse
If you ever want to use the JB leaks again, DO NOT flash the AT&T FXZ. Just a forewarning just in case you get stuck again and start considering it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.

1BadWolf said:
If you ever want to use the JB leaks again, DO NOT flash the AT&T FXZ. Just a forewarning just in case you get stuck again and start considering it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
OMG you're right! Never thought of that! Thank God I acted patiently here. I was gonna flash AT&T ics just before trying that wiping data thing!
Thanks! Will keep that in mind.
One more question though(and hopefully the last..)
Can I flash PA Gapps on slimkat? Since both are based on AOSP right?

i guess i've a problem . by mistake while i was supposed to backup cid , i chose the option erase cid and it s deleted, no backup either. now whenever i reboot, my phone shows some error. since i've bmm i am being able to load into ics in system 1 . is there any possible way to get rid of this error message about cid during startup?? because it is really annoying.