Related
I moved from latest cm9 which caused some troubles when I want to call, unknown phone call appear and was unable to cancel it, only reboot helps. Then I found another ICS rom which look attractive for me - MIU in newest version because not all roms support GSM which i'm using as a carrier (european O2). After flashing I got message phone proces fails every 5sec, so I decide to do same as by cm9 to clear both cache and than flash again rom. After clear of all cache I was unable to install any rom, because I had message, it is not signed (tryied cm7.1/2, cm9, miu, some verizon roms).
I decide to sbf this phone.I take rsd lite v5.4.4 and try to flash 2.4.33 rom, but first time, I deplete my batery, ok, I have second one, change it and try again, everything goes like a charm but after 100% of proceed I get message there is some failure, I'm asked for driver to qhsusb_dload and bootloader writes
bootlader d0.11
code corrupt
and don't recognize cable is connected.
Is there some hope?
Maybe newer rsd lite http://forum.xda-developers.com/showthread.php?t=1348587 also try newer drivers http://androidevolved.com/forums/dr...orola-droid-2-global-usb-driver-download.html
some device bricked like that for about 1 month in China , but no one solved this problem. . .
Sent from my DROID2 GLOBAL using xda premium
kew1701 said:
Maybe newer rsd lite http://forum.xda-developers.com/showthread.php?t=1348587 also try newer drivers http://androidevolved.com/forums/dr...orola-droid-2-global-usb-driver-download.html
Click to expand...
Click to collapse
guys in China that phone bricked like this tried different rsd, drivers, computer,USB cable ,sbf(.29,.33,.608,.629),no luck
Sent from my DROID2 GLOBAL using xda premium
jararak said:
After clear of all cache I was unable to install any rom, because I had message, it is not signed (tryied cm7.1/2, cm9, miu, some verizon roms).
Click to expand...
Click to collapse
Were you getting this message in ClockworkMod Recovery, or were you trying to flash custom ROMs in stock recovery?
As for the other, it sounds like you either have a corrupted SBF or your phone's internal flash memory has become damaged. If it is a problem with the internal flash, your only options are replacing the phone or trying to convince VZW or Motorola it should qualify for warranty replacement.
it looks that there is some problem with step by step from CM
http://forum.xda-developers.com/showthread.php?t=1637429 same issue
on other hand I have win xp 32b and battery was fully charged before I start with "games"
I will try those new drivers, I will see if something differs
on other hand, I bought this phone on ebay without any paper, so probably without possibility to try reclamation on verizon/motorola.
edit : to question which recovery I used, I think it was stock recovery (x+power button, than both volume button after ! showed up)
jararak said:
it looks that there is some problem with step by step from CM
http://forum.xda-developers.com/showthread.php?t=1637429 same issue
Click to expand...
Click to collapse
What step-by-step are you referring to?
jararak said:
edit : to question which recovery I used, I think it was stock recovery (x+power button, than both volume button after ! showed up)
Click to expand...
Click to collapse
You can't flash ROMs in stock recovery, only signed update.zip files from Motorola. To flash non-Motorola ROMs you need ClockworkMod Recovery.
If you manage to SBF successfully, you will need to install a root exploit first, then follow these instructions to install CWM: http://droid.koumakan.jp/wiki/ClockworkMod_Recovery
Hi
I tryied this step by step for sbf, it looks this currently is corrupted http://wiki.cyanogenmod.com/wiki/Motorola_Droid_2_Global:_Full_Update_Guide
To my current problem, it looks I have newer driver revision - 5.4.0, but this rsdlite looks like helpfull (now red icon instead of blue one before). phone was recognized. downloading sbf file from http://www.droidknows.com/showthread.php/364-Gingerbread-Full-SBF-4-5-608 , i hope it will be successfull
about original rescue mode, i don't have this knoweledge, it works only with signed rom, but it is good to know to future. I've already bid for some new d3, but some guy beat me by 1$, when I run for one shot of vodka ;D
i will update shortly if this help me or not, but it does not matter, thanks for help
edit : process failed, After 100% of flashing image to phone, it was unable to find qhsusb driver, it is possible somewhere to download it to win xp 32bit?
Failed flashing process. Phone(0000) Error switching phone to BP Pass through mode (0x70BE); phone disconnected.
http://droid.koumakan.jp/wiki/SBF
Read the How-To section.
I think is something wrong with the phone
Sent from my DROID2 GLOBAL using xda premium
zyy757 said:
I think is something wrong with the phone
Click to expand...
Click to collapse
I think you just replied without thinking.
I posted a link to a wiki article that explains what this error is, and a way to fix it.
Gasai Yuno said:
I think you just replied without thinking.
I posted a link to a wiki article that explains what this error is, and a way to fix it.
Click to expand...
Click to collapse
sorry，is the way in wiki work？
Sent from my DROID2 GLOBAL using xda premium
try search cynogen.wikipedia..
follow this instruction
Sent from my DROID2 GLOBAL using xda premium
I tried it my way
cut some mini usb cable which I have, you need red and brown wire, red is + so you need to connect it to the left pin and brown is ground to righ pin, two in a middle is just for checking state of battery - so now I have a charger for both of dead battery (facing screen to bottom and power button up)
than I created bootable usb via this instruction http://www.droidforums.net/forum/droid-2-global-hacks/170060-tool-ezsbf-d2g.html
now my jedy droid which cut apple is changed with red motorola logo, I get rid of code corrupt message and also have bootloader.
now I'm trying again rsd lite to flash 4.5.608 sbf image. I hope this will help someone in future, at least as one step or kind of fallback from state which I found.
I tried sbflite, sbf_flash but still no progress, I still have only red M logo, after that I get bootlader. as I understand, sbf phone shoul install also OS to phone, doesn't?
I also try to cler cache (/data) via recovery mode (default), but not help.
Should I try to install some rom via recovery? i asume i will need some differ rom than sbf
Gasai Yuno said:
I think you just replied without thinking.
I posted a link to a wiki article that explains what this error is, and a way to fix it.
Click to expand...
Click to collapse
The way to fix that in wiki is for windows 7 or vista, but xp?
Sent from my DROID2 GLOBAL using xda premium
I have a theory of a possible way to fix this, but don't know if it will actually work.
From the sounds of what you are describing, it sounds like everything is flashing except the radio in rsdlite, and that the radio is possibly corrupted by the process.
If this is the case, and you still have access to Motorola recovery (booting with X pressed), maybe you could put the OTA update from 2.4.33 to Gingerbread on the SD card, and try installing the update from zip. The reason for doing this would be to flash the radio without using rsdlite. EzSbf does not flash the radio, so if a corrupt radio is your problem, it will be no help. Just a thought, hope it is helpful.
meon_69 said:
try search cynogen.wikipedia..
follow this instruction
Click to expand...
Click to collapse
Do not follow any instructions for the D2G from the CyanogenMod website if you have ever had a stock Gingerbread firmware (versions 4.6.x) on your D2G. Everything on the official CM site assumes your D2G is running stock Froyo (firmware version 2.4.x) and will not work with a Gingerbread kernel.
---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ----------
zyy757 said:
The way to fix that in wiki is for windows 7 or vista, but xp?
Click to expand...
Click to collapse
The wiki article G.Y. linked says "Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly." This means that the problem is more likely to occur under Vista or 7, not that the fix only applies to those versions. If the same problem occurs in Windows XP, the same fix should solve it.
bhigham said:
I have a theory of a possible way to fix this, but don't know if it will actually work.
From the sounds of what you are describing, it sounds like everything is flashing except the radio in rsdlite, and that the radio is possibly corrupted by the process.
If this is the case, and you still have access to Motorola recovery (booting with X pressed), maybe you could put the OTA update from 2.4.33 to Gingerbread on the SD card, and try installing the update from zip. The reason for doing this would be to flash the radio without using rsdlite. EzSbf does not flash the radio, so if a corrupt radio is your problem, it will be no help. Just a thought, hope it is helpful.
Click to expand...
Click to collapse
Tried flash .608 sbf and ota .629,error when update bp
Sent from my DROID2 GLOBAL using xda premium
jabberwockish said:
Do not follow any instructions for the D2G from the CyanogenMod website if you have ever had a stock Gingerbread firmware (versions 4.6.x) on your D2G. Everything on the official CM site assumes your D2G is running stock Froyo (firmware version 2.4.x) and will not work with a Gingerbread kernel.
---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ----------
The wiki article G.Y. linked says "Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly." This means that the problem is more likely to occur under Vista or 7, not that the fix only applies to those versions. If the same problem occurs in Windows XP, the same fix should solve it.
Click to expand...
Click to collapse
Tried, no luck.I'll try again later
Sent from my DROID2 GLOBAL using xda premium
Ok everyone the leak is here!
I have tested it all day and it works very well, very smooth.
Don't post here if you are having issues with this leak itself. If you have issues with the process then by all means post in here with the issue.
So this is a how to with all the files needed being posted in here as well.
1) FXZ back to full 100% stock 2.3.6, ONLY if you were ON GB to begin with!!! If you started on the ICS OTA, then do not attempt this, you will Brick!!!
2) Download the file below called Blur_Version.55.13.25.MB865.ATT.en.US.zip and copy it to the root of your SDcard (it does not matter how it gets there)
3) Boot into stock recovery (power off, then while the phone is off hold both the Vol up and Vol down button, right in the middle, then hold the power button until you see the boot menu, then highlight recovery with the Vol down button, and select with the Vol up button).
4) Get to the recovery menu (you should see an android with an exclamation point, at this point) by holding the Vol up and Vol down button, then the menu will pop up, select install from /sdcard, then select the Blur file from the root of your sdcard, and tell it to flash it. You will flash a new recovery and see a droid laying down with it's belly open and red exclamation point, this is normal, just hit both Vol up and Vol down again to get the menu and select to flash from sdcard again and choose the same Blur file as before.
5) Boot into ICS, and root using the zip below, you will connect the phone to your computer and use the root.bat (unzip this folder to your desktop) for windows and root.sh for linux/mac.
Files:
ICS OTA:
http://www.androidfilehost.com/main...man/Blur_Version.55.13.25.MB865.ATT.en.US.zip
MD5sum: 5bd615584406ba726ad7d49a225dd6f1
ICS root:
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/jimbridgman/A2_ICS_root.zip
MD5sum: 7cd5a0896a8be580b5a379dff408d0ad
Fxz back to 2.3.5 from ICS, ONLY USE THIS METOD:
http://forum.xda-developers.com/showthread.php?t=1805975
Please do not post anything in this thread but install issues. DO NOT ASK IF YOU SHOULD UN-ROOT OR IF YOU CAN STAY ROOTED, OR IF YOU DID THE FXZ YESTERDAY ARE YOU OK. Follow the instructions above, or don't if you don't you will NOT get support.
Note: I am not responsible if you bootloop. brick or wreck your phone, or if your girl leaves you cause you play with your phone too much because of this. You are doing this of your own free will!
You will most likely not be able to get the "real" OTA while on this leak, and since the BL is going to be the same, you may not be able to install the "real" OTA at all, so when it comes out you will need to give the devs time to make it work for anyone who installed this. Again no complaints about this either, your dev team will find a way to make it work. You just need to give us the time needed when it comes out if there are any issues.
Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!
WOO! Awesome!
farshad525hou said:
Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!
Click to expand...
Click to collapse
Here try this one:
http://sbf.droid-developers.org/edison/list.php
THANKS! Also should the OTA be bigger than 29mb? NEVER MIND
After install this ICS leak, can we come back to 2.3.6 using Atrix2Bootstrap?
Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?
farshad525hou said:
Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?
Click to expand...
Click to collapse
I FXZ'd from 2.3.6 to 2.3.5 so I don't know about such a problem.
Sent from my MB865 using xda app-developers app
@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.
sjc807 said:
@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.
Click to expand...
Click to collapse
THANK YOU!!!! Lo lI would thank you but, i've already hit my 8 thanks daily limit....
How do we get it on our phone if we are running stock 2.3.6? (Unrooted)
Sent from my MB865 using xda premium
question
Done:
Thank you so much Jim. You are the best.
Now if only I could get my Nexus 7 on Thursday , on my day off, I would have everything
Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1
PhoenixNghi said:
Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1
Click to expand...
Click to collapse
You are not 100% stock.... follow my directions, or it will not work... and don't install bootstrap, that is why your logwrap failed verification.
Sent from my SAMSUNG-SGH-I747 using xda premium
I can't wait till I get my phone back! ICS, FTW!!!!
283ish MB
Sent from my MB865 using xda app-developers app
Oooohhh....yeahhh baby,that's what I am talking about,got it :good::good: I wiped it and I did not come across any issues at all.
Thanks so much.
Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.
DX2Trip said:
Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=1396650
There is a section on the fxz in the above noob thread, also look just a little lower there is also a patch zip file to apply to the fxz.
Sent from my SAMSUNG-SGH-I747 using xda premium
Dx, you can find very good instructions on how to flash the fxz in this thread: http://forum.xda-developers.com/showthread.php?t=1396650
Sent from my MB865 using xda premium
i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?
This whole mess started when you tried to flash MEARET firmware on your AT&T phone. NEVER mix firmware!
And trying recovery at this point is not going to work, as the ICS zip is just a large patch file for 2.3.6. And since it failed on the fxz, a portion of your system is missing so ICS won't install. You need to fxz back.
What step is the script falling at? A screenshot would be helpful.
And for the future, please post questions in the Q&A form.
Sent from my SAMSUNG-SGH-I727 using xda premium
you mean at 3rd step?
sorry.please move this thread at q&a
Yes the script from step three is what's going to save you here.
But we need to know where it's failing at.
Sent from my SAMSUNG-SGH-I727 using xda premium
i can see that problem is with cbt, recovey and cdrom partition.
Uh oh.
Which ICS version did you install? Please show need the thread.
I need to know which leak it was.
Sent from my SAMSUNG-SGH-I727 using xda premium
Blur_Version.55.13.25.MB865.ATT.en.US.zip
Well I hate to tell you man. But you are soft bricked until we find an fxz for ICS.
Recovery and cdrom are failing because cdt.bin isn't flashing. And we haven't found a fix for this yet.
Although the strange thing is that this shouldn't be happening on the first leak... but it is...
So you're bricked mate.
Sent from my SAMSUNG-SGH-I727 using xda premium
ok, i will wait.
thanks.
but please explain to me.i had a motorola a1200 and a siemens sx1.when i flashed a firmware, all the flash memory erased and new data wrote at flash.if i had bootloader, all was fine.the only method to brick a phone was to replace the battery when flash the bootloader(or flash false bootloader).
at A2, why when i write a new bootloader and new mbr(and partition table?) is necessary to flash the same or newer edition of firmware?this is because bootloader is locked?
i thought when i flash a new firmware, all the flash memory erased and writes new data(at the begining the bootloader, after mbr with partition table, after the image(i think this is the kernel of linux) and all other the data)
macnick said:
i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?
Click to expand...
Click to collapse
Use rsdlite and flash the Asian or Chinese stock firmware worked for me when I had this issue now I'm running 4.1.1 cm10 jb and its awesome!
If this works for you hit my thanks button
P.s phone must be in fast boot mode
Sent from my MB865 using XDA Premium HD app
Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
macnick said:
Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app
macnick said:
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
whiteboi-hakz said:
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!
Fall of Enosis said:
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!
Click to expand...
Click to collapse
Dude it works and he can then reflash his fw so what's the big deal the one I bricked was at&t non international and that method worked great but I'll take your advice man
Sent from my MB865 using XDA Premium HD app
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
OK well was worth a try I guess ay try his method and let's us know
Sent from my MB865 using XDA Premium HD app
macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.
Fall of Enosis said:
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.
Click to expand...
Click to collapse
Thanked you as earned it man
Sent from my MB865 using XDA Premium HD app
Whenver I tried to flash stock gb 2.3.6 to ICS 4.0.4 searet or mearet using RSD, I get error like mbmloader flashing error then flashing process stop. What is mbmloader? I tried flashing error using moto fastboot command then I get INFOimage and IC type differ-EMU vs. HS
Pls give me detail how to get success flashing to ICS I tried every possible way found in internet for whole 1 month. I tried ot from 2.3.6 searet same thing?? Any advice
You are on GB, and you want to go to ICS?
Do you know if you are trying to flash the correct firmware?
brianmoyano said:
You are on GB, and you want to go to ICS?
Do you know if you are trying to flash the correct firmware?
Click to expand...
Click to collapse
Device from india,
I confirmed from motrolla using imei , they said asia retail
So i flashed searet
amritn said:
Whenver I tried to flash stock gb 2.3.6 to ICS 4.0.4 searet or mearet using RSD, I get error like mbmloader flashing error then flashing process stop. What is mbmloader? I tried flashing error using moto fastboot command then I get INFOimage and IC type differ-EMU vs. HS
Pls give me detail how to get success flashing to ICS I tried every possible way found in internet for whole 1 month. I tried ot from 2.3.6 searet same thing?? Any advice
Click to expand...
Click to collapse
you can't fxz from gb to ICS. you must update normally.
Sent from my MB865 using xda premium
lkrasner said:
you can't fxz from gb to ICS. you must update normally.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Thnx lkrasner for quick reply. I tried to take ota update, stuck in android is upgrading for half an hour, restarted the phone , did factory reset and wipe cache . stuck in M logo. I tried this 5 times. I can easily go back to gb of any region but cannot be upgraded by any means always soft brick.
I'm stuck in gb for more than 1 months.
3 days ago I tried to upgrade to ics leak cheesecake,searet one, it booted fine, but camera didn't work. So i restarted the phone and then the phone stuck in m logo. Within 1 month time i've tried every way and only 1 time it booted to ics and when i tried the same method next time it was soft brick.
Next is can we have stock ics kernel like other device do? How can i extract kernel from firmware zip folder. It is very easy in other decice but couldnot find kernel.img in any firmware.
amritn said:
Thnx lkrasner for quick reply. I tried to take ota update, stuck in android is upgrading for half an hour, restarted the phone , did factory reset and wipe cache . stuck in M logo. I tried this 5 times. I can easily go back to gb of any region but cannot be upgraded by any means always soft brick.
I'm stuck in gb for more than 1 months.
3 days ago I tried to upgrade to ics leak cheesecake,searet one, it booted fine, but camera didn't work. So i restarted the phone and then the phone stuck in m logo. Within 1 month time i've tried every way and only 1 time it booted to ics and when i tried the same method next time it was soft brick.
Next is can we have stock ics kernel like other device do? How can i extract kernel from firmware zip folder. It is very easy in other decice but couldnot find kernel.img in any firmware.
Click to expand...
Click to collapse
You cannot flash a kernel on this device, which is why you cannot just fxz to ICS. it odes all these security checks in the upgrade. Not sure why that fails, but half an hour is not that long for it to hang, I remember mine taking at least an hour to finish.
My guess is, since you flashed different firmwares other than the specific one for your phone, something might be screwed up.
Give it to service and ask them to fix it.
If they can't make it, they might give you another phone. ( under warranty)
amritn said:
3 days ago I tried to upgrade to ics leak cheesecake,searet one, it booted fine, but camera didn't work.
Click to expand...
Click to collapse
Just a thought:If you can get to the ICS leak 1 successfully, you should try OTA'ing from there as it will take you to the official ICS and hopefully everything will work from there.
BTW did you remove any bloatware or in any way modify any system files?coz that is the primary reason for OTA to fail.
Also check out the last_log file in cache/recovery,it might throw some insight as to what is causing the update to fail.
lkrasner said:
you can't fxz from gb to ICS. you must update normally.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Are you sure???
Coz many have followed the fxz route when the update via other methods failed.
And technically why wouldn't the fxz work it will flash the new bootloader which is the main hurdle and other things.
Any insights as to why specifically can't we fxz from GB to ICS.
Not trying to be rude just trying to learn if i've missed anything.
Sent from my MB865 using xda premium
Thanks xda's. May be my device screwed up.
why i'm getting error mbmloader failed?
Even though the device is asia retail, I can flash chinese and hk/tw firmware easily but always fails
searet and mearet firmware which has mbmloader.bin.
deveshmanish said:
Just a thought:If you can get to the ICS leak 1 successfully, you should try OTA'ing from there as it will take you to the official ICS and hopefully everything will work from there.
BTW did you remove any bloatware or in any way modify any system files?coz that is the primary reason for OTA to fail.
Also check out the last_log file in cache/recovery,it might throw some insight as to what is causing the update to fail.
Are you sure???
Coz many have followed the fxz route when the update via other methods failed.
And technically why wouldn't the fxz work it will flash the new bootloader which is the main hurdle and other things.
Any insights as to why specifically can't we fxz from GB to ICS.
Not trying to be rude just trying to learn if i've missed anything.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Well you can flash ICS directly from GB. At least on retail phones. Don't know much about att.
Sent from my ME865 using Tapatalk 2
Ravikirancg said:
Well you can flash ICS directly from GB. At least on retail phones. Don't know much about att.
Sent from my ME865 using Tapatalk 2
Click to expand...
Click to collapse
That's what I said....
Sent from my MB865 using xda premium
Hey guys!
Was trying to solve the restart loop problem by installing a MIUI rom, but I am now stuck on this screen that says..
Stuck on AP Fastboot Flash Mode (S) (Boot Failure)
Battery OK
OK to Program
Transfer Mode:
USB Connected
Invalid CG OTV(CG: webtop): Invalid SP Data
Invalid CG Version (CG: webtop)
Invalid CG OTV (CG: webtop)
Any thoughts or help would be highly appreciated
Did you find the proper fxz for your base firmware and flash it?
Need more info about where you are coming from, what you did to get this problem, and what you have tried..
Sent from my MB865 using xda app-developers app
I am not sure what fxz is...but from what I know, it was on 2.3.6 and next update was failing and it was restarting..so I rooted the phone, installed the bootstrap...tried installing miui from there.. it restarted and now I am on that screen...
Have not tried anything else after that... I was looking around and it seems, I should flash something from fastboot mode? I am currenty downloading the ics fastboot files... planing to use RSD lite to install it...
Is that right approach?
Thanks for your help through...much appreciated.
EDIT: Its an AT&T Atrix 2 if that helps..
So, you were on 2.3.6? The 4.0.4 update failed?
If so, then you should probably be using the 2.3.6 fxz/sbf/fastboot/firmware files - flash those to go back to stock GB, then ota update to ICS the normal way (unless returning to GB is important to you - if so, find ICS leak #1 and install that instead of the ota update after restoring stock 2.3.6).
And yea, you need to be on ICS base to install miui (unless there's a GB version I didn't know about).
Sent from my MB865 using xda app-developers app
Edit: you seen this thread? http://forum.xda-developers.com/showthread.php?p=32113181
Links to the att-us 2.3.6 and 4.0.4 fastboot files are there.. Just read carefully and ask if you're not sure.
It's important to know if you were on 2.3.6 or 4.0.4.. and if you just tried to install a new ROM (system only) through custom recovery, or if you flashed something else through fastboot.
I was surely on 2.3.6, but it was not stable and was rebooting quite often ...it was also trying to download the next update, each time the phone was on...but it would just restart before the download could ever finish...
I rooted the phone after that, installed bootstrap.apk to get into clockwork recovery, then tried installing the MIUI which was based on 4.xx something .... but that failed and I got stuck in that screen....
So, basically, I should download AT&T 2.3.6
http://sbf.droid-developers.org/edison/InlineFlashing_edison_5.5.175.25_cfc_p3_APBP.xml.zip
use fastboot and follow these steps?
Fastboot erase system
Fastboot erase userdata
Fastboot update romfilename.zip
Fastboot reboot
OR
Try to use RSD lite instead?
One more problem though...I tried using the fastboot erase system command...and it tells me Battery low...
I have the phone on charger now, but the Fastboot screen comes up again and I am not sure if it will charge this way?
Any thoughts?
Thanks in advance.
You need to charge somehow (wall charger, macgyver method, another battery, friend's phone, at&t store, etc).. It doesn't charge in fastboot mode.
Then try RSD lite..
Otherwise, you would need to use moto-fastboot commands. See the files in the zip package here for examples (you can look at the .bat files for the proper commands): http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
Sent from my MB865 using xda app-developers app
alteredlikeness said:
You need to charge somehow (wall charger, macgyver method, another battery, friend's phone, at&t store, etc).. It doesn't charge in fastboot mode.
Then try RSD lite..
Otherwise, you would need to use moto-fastboot commands. See the files in the zip package here for examples (you can look at the .bat files for the proper commands): http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Thanks for that, I was able to do all that and now the phone is on 2.3.6 ..but the original problem is still there...the phone keep on restarting.. any ideas what the issue might be?
jackdowsan said:
Thanks for that, I was able to do all that and now the phone is on 2.3.6 ..but the original problem is still there...the phone keep on restarting.. any ideas what the issue might be?
Click to expand...
Click to collapse
So it just reboots at random? Or it boots to Fastboot mode everytime?
If it's random reboots, you might have a hardware issue in your phone.. And you could ask AT&T for a replacement (they will most likely just give you a new Atrix HD since our A2 has been EOL'd).
If it boots straight to fastboot everytime, then there's something else.. not sure what, but I have seen others post of that issue.
alteredlikeness said:
So it just reboots at random? Or it boots to Fastboot mode everytime?
If it's random reboots, you might have a hardware issue in your phone.. And you could ask AT&T for a replacement (they will most likely just give you a new Atrix HD since our A2 has been EOL'd).
If it boots straight to fastboot everytime, then there's something else.. not sure what, but I have seen others post of that issue.
Click to expand...
Click to collapse
It reboots every 3-4 mins or so... Also noticed, it says under settings, that radio if Off and there is no IMEI number...also I cannot seem to turn off the Airplane mode..
Does that indicate something?
jackdowsan said:
It reboots every 3-4 mins or so... Also noticed, it says under settings, that radio if Off and there is no IMEI number...also I cannot seem to turn off the Airplane mode..
Does that indicate something?
Click to expand...
Click to collapse
Hmm.. Yea.. What the heck did you do to it? Did you erase your cid? Do you have a backup of it? If not, sorry to say, but you may be out of luck...
Sent from my MB865 using xda app-developers app
alteredlikeness said:
Hmm.. Yea.. What the heck did you do to it? Did you erase your cid? Do you have a backup of it? If not, sorry to say, but you may be out of luck...
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
I was only doing a OTA update and I ended up in this mess of reboots, then I tried installing the 4.something MIUI, then fastboot files of 2.3.6...and now in this mess
I dont have any backup files or anything...if there any way I can go to stock maybe? or maybe if I can somehow manage to go to ICS, this might be fixed? No ideas :crying:
jackdowsan said:
I was only doing a OTA update and I ended up in this mess of reboots, then I tried installing the 4.something MIUI, then fastboot files of 2.3.6...and now in this mess
I dont have any backup files or anything...if there any way I can go to stock maybe? or maybe if I can somehow manage to go to ICS, this might be fixed? No ideas :crying:
Click to expand...
Click to collapse
You did go back to stock 2.3.6 (the fxz should have flashed all stock images/files)... but if your cid is gone (not positive though that that is your problem), there's no getting it back (it is specific to each device).
You could try forcing the update to 4.0.4 by following this: http://forum.xda-developers.com/showthread.php?t=1779968 - but not sure it will install the update if it can't recognize your phone. You are sure it is an AT&T phone, right?
Unless some other members here have some ideas, not sure what else to try... except calling AT&T for a replacement if you bought it under contract. Just tell them that an over-the-air update failed and the phone keeps rebooting..
So, I wonder, did the OTA update start installing, then fail (a while after installation started)? Maybe that messed things up.. Usually, if it fails right away at the beginning of installation during the system checks, then it should be no issue.. But if it was interrupted later during the install, then that can cause major issues.
alteredlikeness said:
You did go back to stock 2.3.6 (the fxz should have flashed all stock images/files)... but if your cid is gone (not positive though that that is your problem), there's no getting it back (it is specific to each device).
You could try forcing the update to 4.0.4 by following this: http://forum.xda-developers.com/showthread.php?t=1779968 - but not sure it will install the update if it can't recognize your phone. You are sure it is an AT&T phone, right?
Unless some other members here have some ideas, not sure what else to try... except calling AT&T for a replacement if you bought it under contract. Just tell them that an over-the-air update failed and the phone keeps rebooting..
So, I wonder, did the OTA update start installing, then fail (a while after installation started)? Maybe that messed things up.. Usually, if it fails right away at the beginning of installation during the system checks, then it should be no issue.. But if it was interrupted later during the install, then that can cause major issues.
Click to expand...
Click to collapse
tried updating to 4.0.4 but it fails ...I have attached the screenshot.. what can this be?