Database Info

[Q] Stuck in boot loop!

I'm stuck inn boot loop on my note 10.1 because of LCD density modder.
I have done a full factory reset without any result and i am unable to access any file on the device. But i can get into odin/download mode and recovery.
i do not have CMW installed and the device in NOT debugged
Can anyone help me or is it bricked?

zacreor said:
I'm stuck inn boot loop on my note 10.1 because of LCD density modder.
I have done a full factory reset without any result and i am unable to access any file on the device. But i can get into odin/download mode and recovery.
i do not have CMW installed and the device in NOT debugged
Can anyone help me or is it bricked?
Click to expand...
Click to collapse
It sounds like you're going to have to re-flash stock or some other ROM. Use the toolkit (in another post in our forums) and flash TWRP recovery and then flash whatever ROM you want.
Also....do a backup in TWRP after everything is working. Most important thing you'll ever do as it will save you from having to do this kind of thing again.

I would flash a recovery Philz or TWRP boot to recovery format sdcard system data cache and preload .
Phone empty flash stock rom via Odin

seedoubleyou said:
It sounds like you're going to have to re-flash stock or some other ROM. Use the toolkit (in another post in our forums) and flash TWRP recovery and then flash whatever ROM you want.
Also....do a backup in TWRP after everything is working. Most important thing you'll ever do as it will save you from having to do this kind of thing again.
Click to expand...
Click to collapse
and how do i do this when my device is not debugged?

zacreor said:
and how do i do this when my device is not debugged?
Click to expand...
Click to collapse
If you can get into recovery mode - holding power+volume down , then pressing volume up to get into download mode , if so, flash a stock rom through odin & you will be good to go.

Did it :victory: Thank you soo much!!

zacreor said:
and how do i do this when my device is not debugged?[/QUOTE
Not required is why .
Click to expand...
Click to collapse

[Q] Device wont turn on after booting recovery

Hi, I wanted to root. Instead of flashing the custom recovery I only wanted to boot into it and then apply the supersu.zip.
But something went wrong and now I can't turn the device on.
Please help me. :crying: Here is the screenshot, what happened. (attachment)
EDIT: I couldn't turn on the device, but I could start the stock revovery via volume down+ power. And now?
EDIT2: After entering the stock recovery I could boot normally. Why did it behave so strange? This is the correct file openrecovery-twrp-2.7.1.0-bacon.img?

I had the same issue, now I'm on flashed CWM recovery.
Try this img file, this one worked for me. It's from the "OnePlus Easy Toolkit". You can also try it through it... but if you want to do it manually you cann extract the archive and use the provided twrp img file

I took the CWM.img which is in this zip file http://forum.xda-developers.com/showthread.php?t=2779976
And it worked. I could do "fastboot boot [cwm recovery.img]" Thanks for the hint to try CWM instead of TWRP

Can't flash custom recovery on a XT925

Hi,
My wife just got a new phone and gave up her old XT925 so I thought I would try to put CM or SlimKat on it and let my daughter play around with it. But I'm having trouble putting a custom recovery on it. I've unlocked the bootloader. I've used fastboot to write the recovery image...but when I try to reboot directly into recovery so the binary update can complete, it pauses for a couple of minutes and then reboots the OS normally. If I try entering reovery after that, I end up with the dead android with a red exclamation point in him and "no command" written below.
The phone currently has 4.4.2 and System 181.46.3.XT925.RCI.en.CA. Am I out of luck with this device and stuck on 4.4.2?
Thanks!

What recovery did you try to flash ?
Use this one, it worked for me :
http://forum.xda-developers.com/showthread.php?t=2747535

Thanks. That one worked. I wonder why I had trouble with twrp.

Orionbell37 said:
What recovery did you try to flash ?
Use this one, it worked for me :
http://forum.xda-developers.com/showthread.php?t=2747535
Click to expand...
Click to collapse
pls update the link pls

Pausky said:
pls update the link pls
Click to expand...
Click to collapse
Its because you need to rename the stock recovery to .bak at the end of the file name. The stock recovery is getting in the way of you rebooting to TWRP or what ever custom recovery you are trying to use.
If you cant figure out how to do that or don't know where in system the stock recovery is just hit me up and ill give you the path to the file. After you rename the file just go back into fastboot and reflash the custom recovery and you should be able to reboot into TWRP or what ever custom recovery you want.

Bricked my phone need help please!

Today I accidently wiped my internal and external sd card from twrp recovery mode. I was on Lolipop 5.1.
As I wanted to install Cyanogenmod Rom I tried to reflash CWM recovery. Ater doing that I was not able to enter the twrp recovery anymore. I had accecs to the unlocked bootloader and tried to reinstall the boot, recovery and system via fastboot but without any success. The phone did not boot and I couldnt enter recovery mode anymrore.
Now I accidently flashed via fastboot a wrong boot and recovery firmware (4.1) and since that I can not even enter fastboot. The pictre shows where I am stuck. On the bootloader page it says:
Error
Func NO: 10 (FUNC_BOOT_RECOVERY)
Error NO: 2
Can somebody help me to repair my device? Its brandnew.
What can I do without a recovery, without a system and without fastboot.
Here is the picture:
hxxp://s21.postimg.org/tqzu1wlhj/IMG_0191.jpg

balpem said:
Today I accidently wiped my internal and external sd card from twrp recovery mode. I was on Lolipop 5.1.
As I wanted to install Cyanogenmod Rom I tried to reflash CWM recovery. Ater doing that I was not able to enter the twrp recovery anymore. I had accecs to the unlocked bootloader and tried to reinstall the boot, recovery and system via fastboot but without any success. The phone did not boot and I couldnt enter recovery mode anymrore.
Now I accidently flashed via fastboot a wrong boot and recovery firmware (4.1) and since that I can not even enter fastboot. The pictre shows where I am stuck. On the bootloader page it says:
Error
Func NO: 10 (FUNC_BOOT_RECOVERY)
Error NO: 2
Can somebody help me to repair my device? Its brandnew.
What can I do without a recovery, without a system and without fastboot.
Here is the picture:
hxxp://s21.postimg.org/tqzu1wlhj/IMG_0191.jpg
Click to expand...
Click to collapse
So (Vol-) + (Power) w/ usb plugged in doesn't bring it to recovery mode? Have you tried with HiSuite?

jfer671 said:
So (Vol-) + (Power) w/ usb plugged in doesn't bring it to recovery mode? Have you tried with HiSuite?
Click to expand...
Click to collapse
No because I had twrp recovery installed and tried to flash cwm over it. After that I had no recovery at all. But I made some progress now... I am able to flash the same newest twrp 2.8.7.0 recovery to the phone and I managed also to flash the 5.1 stock recovery. I flashed BOOT.img from 5.1 and SYSTEM.img from 5.1 and I got rid of the error in fastboot menu.
Stock recovery I can flash via installer_r24.4.1-windows from acbka.
http://forum.xda-developers.com/mate-7/orig-development/tool-android-4-4-5-1-pc-t3186984
And these two recoveries seems to be the only one that work on my phone....? Currently I have stock recovery installed and i put MT7-L09C900B324 on my sd card (dload/UPDATE.app) and did the three buttons rescue. It seemed to work but It stoped at 90% and still no luck. What am I doing wrong this time?
Hi Suite does not recognitze the phone. When I abort the istallation and reboot the phone starts with the Huawei Logo and goes black and starts to the Huawei logo and goes black and so on...
Here is a picture of where i am stuck at 90% right now, so close...:
hxxp://s13.postimg.org/p093toz5z/IMG_0192.jpg

SOLVED
After a 36 hour marathon my mate 7 is back and working. the trick was to flash the stock recovery for all Lollipop versions wich can be foudn here: http://forum.xda-developers.com/mat...8-7-0-mate7-android-5-1-t3156779/post61958212 via linux. I somehow seem to have had trouble over wndows.
And after that do the three button rescue with the newest B 324 firmware which I have had installed before I destroyed my OS..
and my camera is now running normaly which was the initial reason i tried to install a other firmare.
:laugh:

balpem said:
...the trick was to flash the stock recovery for all Lollipop versions
Click to expand...
Click to collapse
When you say flash stock recovery for all LP versions, did you flash and then reboot each time? or flash over and when complete, flash over again still on fastboot?
Can you briefly describe in steps? Tnx! and Glad you were able to recover

jfer671 said:
When you say flash stock recovery for all LP versions, did you flash and then reboot each time? or flash over and when complete, flash over again still on fastboot?
Can you briefly describe in steps? Tnx! and Glad you were able to recover
Click to expand...
Click to collapse
I flashed via fastboot the stock recovery which you can download via the link above. the provider (user rowihel2012) claims, that this recovery works for all lolipop stock roms.
After that I made a reboot and pressed (power button and volume+) to check if its installed.
Than I downloaded the lollipop version I have had previously installed. In my case this was the B324 European version.
I put it on my sd card (dload/UPDATE.app) and launched the phone with the three button rescue method. The recovery recognized the rom on the sdcard and started to flash the OS.
After less than 5 min, my phone was restored.
I have made the experience, when using certain roms (B324, B308 etc..) with certain stock recoveries, I was not able to flash the OS and the recovery stoped always at 90%.
The recovery linked above seems to work great for the B324 version, I haven't tried any other stock roms with it.

I wonder if this will work for B327? Seems the actual last update for LP was B324, now I can't seem to get out of this firmware to go back to KK. When I flash transition B300, it's successful...but for some odd reason, when I flash 137, 143, 145 or 148...I auto go back to B327. This, after the fact I'm flashing those firmware's recoveries. Any ideas what I might do to get out of 327?
---------- Post added at 01:42 PM ---------- Previous post was at 01:38 PM ----------
Also, what's this Vol+ and Power technique?, all I get is the three menu screen (reboot, factory reset and format cache).

jfer671 said:
I wonder if this will work for B327? Seems the actual last update for LP was B324, now I can't seem to get out of this firmware to go back to KK. When I flash transition B300, it's successful...but for some odd reason, when I flash 137, 143, 145 or 148...I auto go back to B327. This, after the fact I'm flashing those firmware's recoveries. Any ideas what I might do to get out of 327?
---------- Post added at 01:42 PM ---------- Previous post was at 01:38 PM ----------
Also, what's this Vol+ and Power technique?, all I get is the three menu screen (reboot, factory reset and format cache).
Click to expand...
Click to collapse
You can try this recovery above which should work for all lollipop roms but I have no better idea as I have had basicly the same problem and could only flash the former rom i had installed whch was B324.
The Vol+ and Power i do to get into the recovery menu (the three menu screen) to check if the recovery was flashed successfully. I have had often the problem after flashing a recovery that it did not work. this is to check if the recovery works.
When i tried to flash a cwm recovery, i couldnt enter any recovery mode after that anymore. I panicked at this point but than i realised that not all recoveries did work for me. For example I could never flash a CWM recovery, not sure why. Maybe because I tried to flash a 4.4 recovery and I had a 5.1 BOOT.img installed?

balpem said:
After a 36 hour marathon my mate 7 is back and working. the trick was to flash the stock recovery for all Lollipop versions wich can be foudn here: http://forum.xda-developers.com/mat...8-7-0-mate7-android-5-1-t3156779/post61958212 via linux. I somehow seem to have had trouble over wndows.
And after that do the three button rescue with the newest B 324 firmware which I have had installed before I destroyed my OS..
and my camera is now running normaly which was the initial reason i tried to install a other firmare.
:laugh:
Click to expand...
Click to collapse
balpem said:
You can try this recovery above which should work for all lollipop roms but I have no better idea as I have had basicly the same problem and could only flash the former rom i had installed whch was B324.
The Vol+ and Power i do to get into the recovery menu (the three menu screen) to check if the recovery was flashed successfully. I have had often the problem after flashing a recovery that it did not work. this is to check if the recovery works.
When i tried to flash a cwm recovery, i couldnt enter any recovery mode after that anymore. I panicked at this point but than i realised that not all recoveries did work for me. For example I could never flash a CWM recovery, not sure why. Maybe because I tried to flash a 4.4 recovery and I had a 5.1 BOOT.img installed?
Click to expand...
Click to collapse
I see, so then it seems like some recoveries did in fact work with fastboot on me, because the Vol+ and Power worked, but it either only put me in V100R001C900B300 OR MT7-L09C900B300. I've read that I can't just flash KK over LP, that I needed to flash the B300 which is why I flashed transition package first. Should I not have done this?
Once in transition mode though (I booted up and checked, then went back into recovery), if I flashed 4.4 (recovery), it oddly put me back to B327...strange even though the recovery flashed was B137 or B145.
Let me see this link above. I'm back again at 5.1.1 LP B327. I'll do instead fastboot and flash above the recovery and so on, and I'll post the results, if any. Oddly enough, if I flashed boot, recovery and system images of 4.4, I get an "Android" boot screen that hangs, no Huawei.
I really like LP because of some of the features not found in KK like the dual windows, camera tweaks, etc. But no root yet available. TWRP doesn't seem to work as well, fails in fastboot.

balpem said:
After a 36 hour marathon my mate 7 is back and working. the trick was to flash the stock recovery for all Lollipop versions wich can be foudn here: http://forum.xda-developers.com/mat...8-7-0-mate7-android-5-1-t3156779/post61958212 via linux. I somehow seem to have had trouble over wndows.
And after that do the three button rescue with the newest B 324 firmware which I have had installed before I destroyed my OS..
and my camera is now running normaly which was the initial reason i tried to install a other firmare.
:laugh:
Click to expand...
Click to collapse
Okay...so I was able to flash down to B324, but not via the link provided. What I did was, flash B300 cust.img on (fastboot) then flash boot/recovery/cust/system.img (fastboot). Rebooted with VolumeUp + Power to check for recovery (success), performed a wipe and done! Back to B324.
Now I gotta figure how to go back down to B145, which is where I was at with Root and with no problems at all. If I flash B300 again and then B145...I get the "Android" logo (instead of Huawei) and then the HAM7 reboots and recovers itself back to B324.

How to Get stock recovery back on letv 1s??

i had rooted my phone and installed TWRP recovery. but as now marshmallow update is on the way i want my phone clean as new so can u please tell me steps of how to get my stock recovery back. I have unrooted my phone. but only stock recovery is remaining.. Please help me out..

dhwanil728 said:
i had rooted my phone and installed TWRP recovery. but as now marshmallow update is on the way i want my phone clean as new so can u please tell me steps of how to get my stock recovery back. I have unrooted my phone. but only stock recovery is remaining.. Please help me out..
Click to expand...
Click to collapse
Just flash the le recovery from fast boot mode and you will be back to your stock recovery

sagarjais said:
Just flash the le recovery from fast boot mode and you will be back to your stock recovery
Click to expand...
Click to collapse
Thanks for the advice..
But now while the phone is turned on, it says the device is untrusted. The device is working perfectly but i think i have void the warranty.. can i get it back again??

dhwanil728 said:
Thanks for the advice..
But now while the phone is turned on, it says the device is untrusted. The device is working perfectly but i think i have void the warranty.. can i get it back again??
Click to expand...
Click to collapse
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208

sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
Thank You.. So much..

dhwanil728 said:
Thank You.. So much..
Click to expand...
Click to collapse
Have you done it??? Press thanks if I helped

dhwanil728 said:
Thank You.. So much..
Click to expand...
Click to collapse
Does it worked?
I have to get back to stock recovery and ROM.

sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
Hi, tried this. recovery flashed successfully. when booted to recovery, found that its in Chinese.
renamed given rom and placed in memory, but while update got some error (could not read, as it is in Chinese).
when rebooted I was in old Rom.
Now I have 'orange state', stock recovery(in Chinese ) and a custom Rom.
what to do to remove 'orange state', stock recovery+ stock rom?

surajak said:
Hi, tried this. recovery flashed successfully. when booted to recovery, found that its in Chinese.
renamed given rom and placed in memory, but while update got some error (could not read, as it is in Chinese).
when rebooted I was in old Rom.
Now I have 'orange state', stock recovery(in Chinese ) and a custom Rom.
what to do to remove 'orange state', stock recovery+ stock rom?
Click to expand...
Click to collapse
Hey u were in orange state.....i came back from red state

May be try flashing using the smartphone flash tool?

stock recovery is not working.... actually its corrupted.
how could i remove TWRP recovery from my mobile...
pls help me ...!

sagarjais said:
Just flash the le recovery from fast boot mode and you will be back to your stock recovery
Click to expand...
Click to collapse
Hey i was just thinking that cant we flash a rom other than stock?

sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
Stock update link not working.

sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
I almost bricked my phone because of that stupid userdata.img inside the Twrp recovery
For 2 days I've been trying to install a rom with the twrp recovery, which always worked nice although a bit slow, but since the installed rom always had issues, this time I put not only the twrp recovery in flashboot, but also the userdata.img, which by the way there's no reference about it in any doc of the zip
As a result my phone didn't pass forward the coloured Leeco splash screen in chinese, (the one that cames before the twrp spashscreen).
I shut it down and put it on charge, but it didn't even seem to be charging! the red led was always on and the battery had no progress bar, just a 'sparkle' symbol. If that thing isn't even charging, how the hell would I enter fastboot?
Thankfully I got back the normal recovery and bootloader.
So, anyone reading, DO NOT flash userdata.img in fastboot!