Related
Installing ROMS & Such on the A700/701
For Extreme A700/Android Neophytes
Read It All BEFORE Beginning!
Important Links:
http://forum.xda-developers.com/showthread.php?t=1710755 ← Unlock Bootloader
http://forum.xda-developers.com/showthread.php?t=1791165 ← CWM
http://forum.xda-developers.com/showthread.php?t=1806980 ← CM10 Official Thread
http://forum.xda-developers.com/showthread.php?t=2056964 ← CM10.1 Official Thread
http://forum.xda-developers.com/showthread.php?t=2489708 ← CM10.2 Official Thread
-----http://get.cm/?device=a700 ← CM10 Download
-----http://goo.im/gapps ← Google Apps 4.1.2
http://forum.xda-developers.com/showthread.php?t=1995981 ← AOSP 4.2
http://forum.xda-developers.com/showthread.php?t=1952124 ← iconiaN
http://forum.xda-developers.com/showthread.php?t=1953917 ← Vorbeth’s EasyRoot ← Do This to Root!
http://forum.xda-developers.com/showthread.php?t=2004441 ← Vorbeth’s OC GPU Kernel
http://forum.xda-developers.com/showthread.php?t=1994294 ← CoolOne700
http://forum.xda-developers.com/showthread.php?t=2196266 ← IcOdiv for A701 & A700 based on CyanogenMod 10.1
http://forum.xda-developers.com/showthread.php?t=2219575 ← Evil Alex Purgatory A701
http://forum.xda-developers.com/showthread.php?t=2232411 ← 7comp based on RootBox
http://forum.xda-developers.com/showthread.php?t=2510004 ← Official PAC-man 4.3
Software You Will Use/Need (depending on your root method):
http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=4318 ← Acer USB Drivers
http://developer.android.com/sdk/index.html ← Android SDK
General Information:
First off, this was never made adequately clear for new users (without going through a hundred different posts with hundreds of replies): You will be using the Android SDK and the Windows Command Prompt. When installing the Android SDK, change the directory to something easy like C:\SDK because you will be typing it a lot. The directory in that folder you will be using exclusively for this process is the “platform-tools” directory. This is where adb and fastboot are found.
In addition, you will need to activate ADB Debugging on your tablet. This is found by going to Settings -> Developer Options -> USB Debugging. If this isn’t done, you will get nothing accomplished. Yes, you will need to have your tablet connected through USB to your PC for this to work. I know there are other ways, but I’m writing this with brand new users in mind.
After you’ve got that set, you should go ahead and install the Acer USB Drivers. None of my computers could properly identify the tablet without the drivers. Speaking of quirks, 64GB microsd cards are not generally very friendly with CM10 or CWM even when formatted as Fat32. There are lots of issues I can’t find a workaround to. Consider using a 32GB until the kinks are worked out.
I’m also assuming you are currently running the JB OTA that was pushed worldwide in October 2012. If you are not, then there are a few extra steps when installing IconiaN. Although I compiled the instructions you’re reading, I had nothing to do with anything else. In fact, I didn’t write the codes used to install things through the command prompt….I just compiled all the information into one easy-ish to follow paper.
As usual, if anything in this causes a brick to your tablet, it was your decision. I’m just providing the information that has worked for me (repeatedly). Also, as I’m not a developer, nor am I very handy with editing files or trouble shooting things without actually handling them…….Ask your specific questions directly to those people in charge of the files (pawitp, Vorbeth, Moscow Desire, meier2009, odiv81 and alx5962). They’re the gurus at this..I am a plebe in their shadow.
TL;DR:
Install Android SDK to an easy directory.
Install Acer USB Drivers.
Unlock Your Bootloader: (codes from alx5962)
1. Open a command prompt in windows and navigate to the directory where adb is stored. For the sake of conversation, I’m going to call it “C:\SDK\platform-tools”
2. Plug your tablet into your computer through USB. It should automatically mount because you’ve installed the Acer USB Drivers and didn’t skip that step above. J
3. At the command prompt, enter the following:
Code:
adb reboot-bootloader
-- Allow the device to reboot.
4. Type Code:
Code:
fastboot oem unlock
5. Press the + Volume button to select Unlock then - Volume button to confirm.
6. Restart :
Code:
fastboot reboot-bootloader
----- I had issues on step 6. I tried that, and it rebooted to the bootloader screen. To be on the safe side without hard rebooting (not knowing what was going on), I used the command from Step 3. to reboot. This works for ICS and for JB bootloaders, I confirm I used the above steps on both.-----7. Confirmation of your unlocked status will be seen in the upper left hand corner of the screen.
Install Clockwork Mod Recovery: (all work & codes from pawitp)
Somehow I wasn’t able to install this properly (permanently) until last night (11/09/12). I’m still not entirely sure what I did differently, but I’ll try to document it here. The safest version of CWM is 6.0.1.5. Don’t attempt anything without that version or better. I’ve heard that at this time the touch version isn’t working properly, so be sure to download the original style CWM.
To navigate CWM, the following bit of information will come in handy (especially if you’ve never used it before.) Use the ‘Vol-‘ and ‘Vol+’ buttons to navigate up and down and the ‘Power’ button to select your choice. When you have made a choice it will sometimes give a screen with a ton of “NO” options with only one “YES” option (usually near the bottom). Like any good video game, if you scroll upwards, you can get to the bottom of the screen faster.
1. Place the CWM file you downloaded into your “platform-tools” directory. For the sake of being easy to install, I changed the file name to ‘recovery.img.’
2. Open a command prompt in windows and navigate to the directory where adb is stored. For the sake of conversation, I’m going to call it “C:\SDK\platform-tools”
3. Plug your tablet into your computer through USB.
4. At the command prompt, enter the following:
Code:
fastboot flash recovery recovery.img
5. At this point, you have flashed CWM to the system, BUT you will now need to boot into CWM using :
Code:
fastboot boot recovery.img
The caveat here is that you will need to install either a custom ROM or unencumbered boot.img (kernel) NOW. If you do not install one, flashing CWM was pointless because stock recovery will overwrite it at next reboot. When prompted at reboot (leaving CWM after flashing a ROM) you should choose to keep CWM. This was sort of a miscommunication between the devs and myself, but meier2009 and Moscow Desire cleared it up.
-----Step 5. does NOT install recovery, but forces your system to boot into CWM by pushing the file to your A700 from your ‘platform-tools’ directory.-----
For Future Reference: Enter recovery…(JB):
a. With system powered off, press and hold ‘Power’ and ‘Vol -‘
b. When the system vibrates, release the ‘Power’ button.
c. When the system vibrates a second time, slide your finger from ‘Vol-‘ to ‘Vol+.”
d. When the system vibrates a third time, release that button.
Install pawitp’s CM10.1 OR IcOdiv (A701): (all work & codes from pawitp)
Download the CM10 nightly from the official Cyanogen page and grab the Google Apps file (optional, but you won’t have market without it) listed in the links section. Despite what people say, I have always been unable to install from my external SD card. Instead, I save the zip files to the root/main directory of the internal SD. Save BOTH FILES to internal SD at this time. This has always worked for me, but your mileage may vary. You do this at your own risk, blah, blah, blah.
1. Boot your A700 into CWM using the steps outlined in Step 5. (or 6) from “Install Clockwork Recovery Mod.”
2. Backup your system by navigating to “backup and restore” by using the ‘Vol-‘ and ‘Vol+’ buttons to navigate up and down and the ‘Power’ button to select your choice.
3. At this point, there are two options for you. “backup” and “backup to external_sdcard”…. I have never been able to mount my 64GB Fat32 external_sd in CWM. Try a smaller card if you have one available (I don’t). If you can backup to external, that is probably necessary when coming from stock. I would only backup to internal if you are just updating from an older nightly or previous rom.
4. On the main screen, assuming you’re coming from stock JB or ICS, you will need to do a couple of wipes. I’m positive the first is necessary, and have read in other parts of threads and other forums that the other two wipes are needed, but as they’re both called “cache,” I went ahead and did both (with no ill effects).
Select “wipe data/factory reset”
Select “wipe cache partition”
Select “advanced” and navigate to “wipe dalvik cache”
Go back to the main menu.
5. From the main menu, select “install zip from sdcard”.
6. Select “choose zip from sdcard” and scroll down to the CM10 zip file. Press the ‘Power’ button to select and confirm.
After this has successfully installed, you can choose to install Google Apps or not. I’m assuming you will want to install them because…well…who doesn’t?
7. To install Google Apps, follow Steps 3 and 4 from above, but this time you will choose the gapps zip file instead of the CM10 zip.
8. Reboot Device & Enjoy well sorted Jelly Beans.
Install iconiaN: (all work & codes from Vorbeth)
At the moment this is my favorite. It is one version number (4.1.1) behind CM10 (4.1.2), BUT it is compatible with my SD card, and is similar to the stock experience …. only faster and without the bloatware. The only reason it is second in this guide is because of the alphabet (C before I & P before V).
The latest updates to the ROM bring the latest GAPPS and firmware. meier2009’s 4Way Reboot Mod is also included (and rocks).
1. Boot your A700 into CWM.
2. Follow Steps 2-6 from above if coming from stock JB (or CM10, or CoolOne700) with the exception that you’re installing the iconiaN zip (not CM10, duh). Also, iconiaN comes with v4.2 Google Apps pre-installed, so no need for Step 7.
-----2.a. If coming from stock ICS, you will need to install the Jelly Bean Firmware (Found in the Aroma Setup of the ROM)
3. If coming from an older version of iconiaN, you shouldn’t need to do the wipes, but go ahead and do the backup just to be safe.
4. Reboot Device & Enjoy well sorted Jelly Beans.
-----On a side note, I went ahead and installed BusyBox (https://play.google.com/store/apps/details?id=stericson.busybox) not sure if this was necessary, but I am suffering no ill effects from having it running on my tablet. -----
Install Vorbeth's OC GPU Kernel: (all work & codes from Vorbeth)
This is a custom kernel (as of this writing available only for the A700) that overclocks the Tegra 3 from 1.3Ghz to 1.5Ghz. There has been a noted improvement in gaming performance using this kernel.
1. Boot your A700 into CWM.
2. From the main menu, select “install zip from sdcard”.
3. Select “choose zip from sdcard” and scroll down to the iconiaN Kernel zip file. Press the ‘Power’ button to select and confirm.
4. Reboot Device PLAY SOME GAMES! WEE!
Install Vorbeth’s EasyRoot: (all work & codes from Vorbeth)
If for some reason you’re happy with stock and just want a very simple way to ROOT, then this is for you. Using this kernel will cause OTA to stop working (or you will have to edit the updater-script) and remove all the file checks. The latest update has made all previous instructions null, and it is now exceedingly easy to install ROOT on your A700. Awesome! Still, this does require an unlocked bootloader.
1. Download and extract the EasyRoot ZIP on your computer.
2. Locate and double click the file 'easyroot.bat'.
3. Follow all onscreen instructions.
4. Profit.
CoolOne700: (all work & codes from meier2009)
This is the new kid on the block. meier2009 has included three different install options in this ROM including Full (rooted stock), Small (all the Acer bloatware removed), and Custom (Choose what you want.) It’s definitely one to keep an eye on. Custom install is very handy. He’s also got his 4Way Reboot Mod which adds all our favorite reboot/recovery features. Sweet! Also, BusyBox and SuperSU are included on install, so you don’t need to worry about that.
1. Boot your A700 into CWM.
2. Follow Steps 2-6 from CM10 Install if coming from stock JB (or CM10, or iconiaN) with the exception that you’re installing the CoolOne700 zip (not CM10, duh). Also, CoolOne700 comes with Google Apps pre-installed, so no need for Step 7.
-----2. a. If coming from stock ICS, you will need to install the Jelly Bean Firmware (Found in the Aroma Setup of the ROM)
3. If updating from an older version of CoolOne700, you won’t need to do any of the wipes, but it is always a great idea to do the backup.
4. Reboot Device & Enjoy well sorted Jelly Beans.
Code:
6. If upon reboot, you hit the old system recovery, you will need to reflash the recovery.img OR just work around it by doing:
Code:
fastboot boot recovery.img
-----Step 6. does NOT install recovery, but forces your system to boot into CWM by pushing the file to your A700 from your ‘platform-tools’ directory. I had to use this method to install CM10 because I was never able to get CWM to install. Your luck may be different.-----
THAT´s the Trick my Friend !
Install recovery with
Code:
fastboot flash recovery recovery.img
AND THEN
Code:
fastboot boot recovery.img
Install any ROM and if you´re rebooting and asked to FIX Recovery, answer YES, then it will be leaved there !!!
With this way your also able to start CWM Recovery temporary
only use
Code:
fastboot boot recovery.img
then CWM will start, you can flash anything and after that CWM is gone, because the Stock Recovery is always inside the Recovery Partition
Makes sense then how I finally ended up with CWM actually installed on my tablet. Were the original instructions from pawitp mistaken, or just incomplete?
ExtremeRyno said:
Makes sense then how I finally ended up with CWM actually installed on my tablet. Were the original instructions from pawitp mistaken, or just incomplete?
Click to expand...
Click to collapse
Lost in translation...
ROFLMAO
Added more info last night and have now included the AOSP 4.2 to the links. Keepin' this bumped & updated.
Thanks for posting this excellent How To! I used it to install CM10.
I can confirm the backup to external backup functionality does work with a 8 GB MicroSDHC card. One thing you could do to bypass the external vs internal SD card discussion is to use sideloading. I used it to both install CM10 and the Google Apps and it works nicely. Just select Update through sideload in CWM and then enter 'adb sideload <filename>' on the command line and everything works nicely.
Also for the real beginner you could may be suggest backing up all user applications using Titanium Backup in order to easily restore them after flashing a mod.
Bumping thread back near the top. Lots of people got an A700 for the holiday and it seems many of them are bricking or at least screwing things up using outdated methods or strange new forms of CWM from other forums.
Also, thanks for the info, SanjuroE. Appreciated, and I can honestly say I never knew how to do the sideloading thing. I didn't actually realize that was what it was as on my old tablet (three years ago) sideloading was always in reference to installing from the external SD.
This guide was awesome. Many thanks for this.
I flashed CWM 6.0.3.1 via fastboot.
After that I tried fastboot boot recovery.img but it doesn't work.
On the display:
Booting downloaded image.
But nothing happens ??
Can anyone help me ??
schlex2010 said:
I flashed CWM 6.0.3.1 via fastboot.
After that I tried fastboot boot recovery.img but it doesn't work.
On the display:
Booting downloaded image.
But nothing happens ??
Can anyone help me ??
Click to expand...
Click to collapse
Loot at
http://forum.xda-developers.com/showthread.php?t=1791165
Post #166 to end of thread.
cfgh said:
Loot at
http://forum.xda-developers.com/showthread.php?t=1791165
Post #166 to end of thread.
Click to expand...
Click to collapse
Thanks mate!
I tried another recovery.img and than everything went fine!! :good:
USB driver link is not working.
papars said:
USB driver link is not working.
Click to expand...
Click to collapse
Check this : http://forum.xda-developers.com/showpost.php?p=58172023
Many files available, including Drivers
I can't connect my iconia a700 to PC (Windows 10) is say: device not found. Any help?
I install USB Driver, but in Device managers shows Acer Iconia Tab a700 with yellow worming sign.
Driver Issues WIN10
goralpm said:
I can't connect my iconia a700 to PC (Windows 10) is say: device not found. Any help?
I install USB Driver, but in Device managers shows Acer Iconia Tab a700 with yellow worming sign.
Click to expand...
Click to collapse
Hi,
I have the same issue and it took me hours to even find a driver from ACER. But even after the installation I cannot get the tablet to work stable. I installed general MTP drivers which gave me access to the "adb reboot-bootloader" command but during the reboot the tablet gets stuck on the Acer logo screen and does not boot into the bootloader. I have to unplug the tablet and only then I get the white text in the top left corner of the screen saying "starting Fastboot USB download protocol". But that is it. I assume that fastboot would use the Acer drivers to access the tablet but I don't have any for windows 10.
My question: Could somebody post drivers for Windows 10 for the A700/A701?
Thanks
realshadow
realShadow said:
Hi,
... ...
My question: Could somebody post drivers for Windows 10 for the A700/A701?
Thanks
realshadow
Click to expand...
Click to collapse
I had exactly the same problem. The solution was give here: https://forum.xda-developers.com/showthread.php?p=48915118
You don not need Acer driver.
- Wayne
free photo hosting
photo sharing sites
New Jelly Bean update for QMobile Noir A10 (14-03-2013)
Guys ! The Auto Rotate Issue Has Been Fixed in Jelly Bean Rom u Can Download it from the following link.
Download Link: QMobile_A10_JellyBean_Update(13-03-2013).zip
Update Features:
Auto Rotate Issue Fixed
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
How to install:
DO AT YOUR OWN RISK!!!
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
Old ROM Link
Download Link: QMobile_A10_JellyBean_Rom.zip
Features:
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
Bugs:
Auto Rotate Not Working....
How to install:
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
All the info shared here comes from my blog here http://qmobilea10.blogspot.com
Sent from my A10 using Tapatalk 2
Your instructions are a bit wrong.
For this tool to work, the device needs to be detectable in ADB (you can check by typing 'adb devices' in command prompt).
If you follow STEP 5, this won't be possible and the rooting process won't be able to start.
Step 5 needs to be ignored. You need to put the device into USB Storage mode for this process to work.
bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
i have already root my a10 and come to xda post the mathod and find ur post u already done as i buy this phone some days before u posted the method for macromax a110 the same spec every t same as qmobile noir a10 and thx for it em happi tht peoples working this kinda stuf in pakistan and i need som devolper who devolp sum custom roooms for a10 and micromax as well..
for noir 10 follow my post..
fisrt of all thx brother for ur post follow 1st post of bahiwala
1 download the file Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging(as it should be enabled but check it if u disabled it...)
3.. just ignore tht driver download step and install QMobilePCTool its provided in cd wid box install it and connect ur phone with usb cable and dropdown the notification bar and select the connect 2 media storage if its a usb storage then leave it now open ur QMobilePCTool and then choice ur devic click on refresh now a10 comes up selct it and install the drivers for a10..
4..extraxt the Root_with_Restore_by_Bin4ry_v15.7z with winrar aur 7 zip u like then run the file runme.bat and type 1 from keyboard and entr it
and then follow the instuction for restore and phone must be restart atleast 2 tyme..... and its done now youre rooted
Why we need 2 rooot we can instaal custum rooms backup the orignal stock room and over clock the processor and use sum apps like screenshot apps for take the screeen shot and etc enjoy msg me if any problem......
can we run jelly bean on QMobile Noia A-10
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???
Farri i dnt think so tht we can yeah in a way we can update it as we if flash custum room of jely bean it will take some tyme but i think we dnt have radio framw as 4.0 custum rooms when i flash one its work grat sum extra animation goood battry more battry bakup more fast but my signals was vaishd sooo i restore my stock room sooo the problm is radio as this rooot mathod is for micromax in india they use 3g network mostly and there frequency are not same like pakistan as i googled it sooo tht make signal go ad i seaching for a long tyme for radio but em not able 2 find there is sym light for 4.1 but sum problems...........................
Any custom rom for qmobile noir a6?
Sent from my Qmobile A6 using xda app-developers app
Any way to install custom rom on Qmobile A2?
Hi.. I want to ask some questions.. If I only root my my phone nd do not install clockward mode.. then can i unroot my phone? and it will be unrooted as like was original?
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
When u root ur phone it displays two options, one is root and second option is to unroot ur device. Even after installing cwm u can revert back to stock recovery anytime.
Sent from my Micromax Canvas 2 using Tapatalk 2
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
farri613 said:
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???
Click to expand...
Click to collapse
No update yet for our qmobile a10. But there is a jelly bean update on the way for micromax a110.
Sent from my Micromax Canvas 2 using Tapatalk 2
gps
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
salluhassan said:
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...
Click to expand...
Click to collapse
Bro!
t first time GPS fix takes some time. Try it with all options selected under location settings
Sent from my Nexus 7 using Tapatalk HD
Stock rom
bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
CAN YOU PLEASE PROVIDE ME WITH THE STOCK ROM (cwm backup) I HAVE MESSED UP MY CAMERA AND REALLY NEED THE STOCK ROM
Can somebody please upload the stock backup files so that i can restore from it(my phone is messed up) or please upload your "system" folder pleae
System.img and nandroid.md5 required, please upload these files, get from gscript or cwm backup
Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*
well now i dont need the full backup, please anybody just go into your system folder and inside there is "lib" folder. I just need the lib folder please
---------- Post added at 02:26 PM ---------- Previous post was at 02:14 PM ----------
shantam said:
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*
Click to expand...
Click to collapse
bro i want to remain on stock qmobile, would you be kind enough to use root browser to navigate to your system folder and then share your "lib" folder
"system\lib" it is required to bring my camera to life
please
Need help please
I have problem in step 4
When i extract the Root_with_Restore_by_Bin4ry_v15.7z and run cmd command open and when i select 1 the problem occurred says " THE SYSTEM CANNOT FIND THE PATH SPECIFIED"
PLEASE HELP ME
i try every possible way to work this out but it couldn't i even install pdanet but still didnt work.
I need a possible solution that where did i go wrong.
Thanks
Jelly Bean Update for QMobile Noir A10
Good News for all Qmobile A10 users!!
Jelly Bean Update is available for QMobile Noir A10. Link added in first post.
Download from first Post & update your phone.:good::good:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2
kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.
sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.
kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2
Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956
Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT
violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery
Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!
Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.
Fast JB v2.5 for Swipe Float X78
Do at your own risk, I am not responsible for any damage.
Source-Here
Credits- Toxicro for this jb port
Requiresments
PC with Android SDK and platform tools installed.
Root access and CWM Recovery( for nandroid back up). Install here
Backup First-MANDATORY
1. Backup Bootloader by this adb shell or terminal command
su
cat /dev/block/nanda > /sdcard/bootloader.img
OR
backup the Script.bin from bootloader by Script.bin-backup folder attached below,no need to backup full bootloader.
2. Make a nandroid backup with CWM recovery.
3. Copy all the backup folder and files in your pc..
Now the steps to install Jelly Bean 4.2.2
1. Download the FaaastJB-v2.5 rar parts from this link.
2. Extract the .img file and install via LiveSuit.
3. Wait for tablet to boot and start.
Credits- toxicro
Now you will see Touch screen , Gsensor , camera will not work
So here is the fix of all these by me for our Swipe Float X78 Tablet.
1. Download the 2nd attachment and extract FastJBv2.5 folder anywhere in pc
2. Connect your Swipe tab with pc( though TS, Gsensor will not work then).
3. Run run.bat as Administrator in FastJBv2.5 Folder and follow.
4. After complete , it will restart your tab automically.
5. Enjoy JB 4.2.2.
HD game working after signing google account, tested Batman TDKR,The amazing spiderman, N.O.V.A 3, MC4 (little laggy), MC3,Asphalt 8, AVP, NFS Most wanted,GTA 3, GTA vc,Gangstar vegas etc.
Can't wait to get this
Where do I download the Android SDK and platform tools?
Download android sdk from here
Disclaimer: Flash at your own risk, I added tutorial so if something gone wrong to your phone, don't blame me.
Click to expand...
Click to collapse
New QMobile i9 Users
Click to expand...
Click to collapse
Click Here First
IMEI / NVRAM Backup
Click to expand...
Click to collapse
Method 1:
Before Installing the KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
Method 2 (In Case No IMEI Backup):
1.Be patient and it will fix your imei
2.Download the IMEI_WINDOWS.zip from here
3.Extract the contents to C:\Users\Username (Current User)
4.Open command promp and cd to the IMEI_WINDOWS folder
5.Now type "imei.exe 123456789111111 123456789111111" without quotes
6.Just replace both the 15 digit numbers with your IMEI 1 and IMEI 2 respectively
7.Now a file named "MP0B_001_NEW" will be generated in your IMEI_WINDOWS folder
8.Just rename it to "MP0B_001"
9.Now download the IMEI_FLASHABE.zip from here
10.Extract this zip and go to "/data/nvram/md/NVRAM/NVD_IMEI/"
11.Delete the placehere file and paste your "MP0B_001" file here
12.Now zip the META-INF and data folder and flash it with recovery
13.You have to flash this after you see imei error on your 1st boot
14.Don't flash directly after the ROM, just do your first boot then flash it.
Method 3 (In Case No IMEI Backup):
1.Download IMEI Repair Tool
2.Download Support Files
3.Instructions To Follow
QMobile KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Download Scatter File From Attachments And Add It In Firmware Folder Now Load It, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Official Noir i9 KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" or "subbinst-signed.zip" Via Recovery.
MyPhone KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Trust yourself you can do it!. :laugh:
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" Via Recovery.
MMX KitKat Release
Click to expand...
Click to collapse
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "subbinst-signed.zip" Via Recovery.
Custom ROM "Classic Kat" by Me
Click to expand...
Click to collapse
Click Here
Custom Rom Based On MMX
Click to expand...
Click to collapse
Custom Rom v3
1.Place ROM Zip File in your sdcard
2.Wipe data/factory reset
3.Wipe dalvik cache
4.Flash ROM from sdcard
5.Flash subbinst-signed.zip from attachment to get root access.
6.Enjoy a Proper and Stable KitKat
7.Download and Flash FILE_MANAGER.zip to remove error in the File Manager. :good:
8.If no engineering mode in your cell phone then download engineermode.apk and copy/paste in system app via Root Explorer
Increase App Storage
Click to expand...
Click to collapse
Use it only on MMX KitKat Release and on Custom ROM based on MMX. Not with MyPhone KitKat Release.
Step 1: Download "Internal APP storage (4GB MMXKK).zip" from bellow
Step 2: Extract the file
Step 3: Open SP Flash tools
Step 4: Add scatter file
Step 5:Select EBR1 and EBR2
Step 6: Click on Download
Step 7:Remove the battery from your Canvas 2 colors
Step 8:Connect your phone to pc via data cable
Step 9:wait for the completion of Flashing Process
Step 10:Reboot your Phone
Step 11ull down Notification panel and tap on the msg "Damaged Internal SD card"
Step 12: Tap on Format ...
Now Enjoy 2.1 GB app storage with 410MB Mass storage....
Revert Back To JellyBean i9 Official
Click to expand...
Click to collapse
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips. 1 file is missing in the firmware zip which is attached below named secro.img, add it in the firmware folder before proceed.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, wait till all files to load.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Stock JellyBean.
Add-ons
Click to expand...
Click to collapse
Click Here
Plese Hit thanks button if I helped you!
Click to expand...
Click to collapse
Frequently Asked Question (FAQ)
Click to expand...
Click to collapse
1. After I upgrade into kitkat firmware, can I downgrade again to Jellybean?
-Just flash dump rom of jellybean using spft.
2. I back up in CWM, Can I restore this in Kitkat version?
-No!
3.May I ask if we have custom recovery available for our kitkat version?
-Yes CTR
Credits
INCPAK
Biswajyoti
CallMeX!!
umangleekha
More Custom KitKat ROMs
You Must Be On KitKat To Flash These ROMs
Click to expand...
Click to collapse
ROM Links JellyBean 4.2
Click to expand...
Click to collapse
1. Huawei Honor 3C
2. Galaxy s5
ROM Links KitKat 4.4
Click to expand...
Click to collapse
1. KitKat Fresh v3 (4.4.2)
2. KitKat Emotion UI (4.4.2)
3. SlimKat Themed KitKat (4.4.4)
4. AOSP KitKat ROW (4.4.2)
5. Lenovo KitKat (4.4.2)
6. Android L Themed ROM
Procedure of Installation
Click to expand...
Click to collapse
1.Place Any ROM Zip File in your sdcard.
2.Wipe data/factory reset.
3.Wipe dalvik cache.
4.Flash ROM from sdcard.
5.Flash 4.4 Root.zip from attachment to get root access.
6.Enjoy.
Add-ons
Click to expand...
Click to collapse
Click Here
Note: Replace the boot.img in Fresh v3 to use Memory Card as default.
Click to expand...
Click to collapse
Credits
4pda.ru
Have you tried using titanium backup, go backup or lucky patcher after root genius because when i earlier flashed kitkat these apps weren't working and i had to revert back to jelly bean.
Edit: Thanks brother, all these apps are working after root genius. You've solved a big problem for me.
Add-ons
Add-ons
Click to expand...
Click to collapse
1.Best Keyboard In Town.
2a.Best Music Player In Town
2b.Music Player Add-on Patch
3.Best Camera App In Town
4.QMobile Stock Logo i9
5.Battery & Performance Patch
Procedure
Click to expand...
Click to collapse
1.Place Zip File in your SDCard.
2.Reboot Into Recovery.
3.Flash zip from sdcard.
4.Enjoy.
root genius failed.....when I flash CWM recovery it says PMT changed for rom
I alreay told in the post that flash the recovery with the ROM by replacing the included recovery
sorry my bad...tnks 4 reply
Always welcome
If you want to ask any question please ask on this forum only. Thanks
New i9 users must check this link
http://forum.xda-developers.com/showthread.php?t=2836748
Screen shots
qwerfaseeh said:
Before Installing the Official KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
7. IMEI backup is a must thing.
8. Enjoy Official Release.
[/B]
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
1. Just Install PDA.Net+ Driver
2. Use the Genuine Root method.
3. No need to install the root.zip first
4. Just attach cell phone and run genuine root and click on Root button.
Click to expand...
Click to collapse
provide screen shots of whole phone
Root method has been updated, and a new custom ROM named CleanKat is added in the thread, check the first and 2nd post for the easiest and most proper working root.
Mustafa Chaudhry said:
provide screen shots of whole phone
Click to expand...
Click to collapse
added now check the 2nd post
qwerfaseeh said:
added now check the 2nd post
Click to expand...
Click to collapse
I flashed the attached file but root checker says not proper root what to do?
Is there any superuser app in the app drawer?
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
qwerfaseeh said:
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
Click to expand...
Click to collapse
Yes, there is and I reflashed the zip file again and its resolved and root checker is happy with it
So r u happy with this easy and proper root?
Also comment about the easiest IMEI backup method
if any one want to increase App storage which is almost 700 MB see first post
Use it only on Official KitKat and 2nd Custom ROM. Not with 1st custom ROM or with Official Leak on 1st Post.