Related
Tried installing different roms and it still reboots back into recovery and have also tried flashing other recoveries any help?
http://forum.xda-developers.com/showthread.php?p=17258229
Sent from my LG-P999 using Tapatalk 2
djvoleur said:
http://forum.xda-developers.com/showthread.php?p=17258229
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
im actually on that right now lol hope it works
I tried it and it worked was able to boot into device into stock however I flashed CW and tried to install a custom rom on it and it just reboots into cm again
Of course it works... because it happened to me too
Sent from my LG-P999 using Tapatalk 2
My device was working just fine in the A.M. as I flashed from Genesis (ICS) back to Lezo OS (GB) over to Joy OS (also GB). When I tried to restore a backup of my Genesis ROM I was more than delighted to see that upon trying to reboot I was unable to boot out of recovery. Now I've done everything in the linked post up to about step 10 where I kinda get stuck. I run the Flash but get nothing. At this point I'm just hoping for a Solid solution. Someone PLEASE assist
Boot_Derran said:
My device was working just fine in the A.M. as I flashed from Genesis (ICS) back to Lezo OS (GB) over to Joy OS (also GB). When I tried to restore a backup of my Genesis ROM I was more than delighted to see that upon trying to reboot I was unable to boot out of recovery. Now I've done everything in the linked post up to about step 10 where I kinda get stuck. I run the Flash but get nothing. At this point I'm just hoping for a Solid solution. Someone PLEASE assist
Click to expand...
Click to collapse
Try this way. Anytime I soft brick my G2x, this is how I rebuild it.
You'll need that ROM you got from previous thread, I do believe.
It will push a fresh recovery, than you can just go back to flashing the ROM.
justjackyl said:
Try this way. Anytime I soft brick my G2x, this is how I rebuild it.
You'll need that ROM you got from previous thread, I do believe.
It will push a fresh recovery, than you can just go back to flashing the ROM.
Click to expand...
Click to collapse
Edit: I have then since followed the directions EXACTLY and now I'm back in business. Much appreciated
Boot_Derran said:
Edit: I have then since followed the directions EXACTLY and now I'm back in business. Much appreciated
Click to expand...
Click to collapse
Your welcome. Glad i could steer you in the right direction and it worked for you!
Sent via Acer Iconia A100 on CM10_Build090212; godmachine v2.0 kernel, Smooth, Stable, Fast
if rebooting loop caused by installing new soft, try looking at this thread. its helped me
http://forum.xda-developers.com/showthread.php?t=2451696
i have rooted my infuse 4g using odin using this thread http://forum.xda-developers.com/showthread.php?t=1613523. but after installing this my phone was okay, then after i took backup thru cwm, after that i installed rom of jellybean and after installing it my phone cant start, so i took battery out and again go to recovery mod and try to restore it but i m facing same problem, my phone not starting, even usb mount also not working,
i have format my infuse again and try to do it with odin again but it shows that
E: failed to mount/dbdata(file exist)
E: copy_dbdate_media:cant mount /dbdate
your storage not prepared yet, please use UI menu for format and reboot action.
media files copy failed.
please help me. i m worried about it coz just yesterday i bought it new. so please please help me.
i dont know what is UI menu also.
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Truckerglenn said:
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Click to expand...
Click to collapse
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
read this, should help
http://forum.xda-developers.com/showthread.php?t=1776129
This too
http://forum.xda-developers.com/showthread.php?t=1437548
Thank you thank you thank you
andros11 said:
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
The first link I posted for you will walk you through it. Read all the instructions, re-read, look up anything you don't understand, and then follow the directions.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Thank you thank you thank you
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, i have flashed JB successfully and GAPPs also. thank you once again. i followed your method and its very easy. first CWM was red i flash JB and after that i pull battery and start CWM at that time it was Blue and i flashed, now its installed.
One more HAPPY INFUSE OWNER.
Is this forum group great, or what!!!!!!
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you ...
Click to expand...
Click to collapse
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Smokestack360 said:
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Click to expand...
Click to collapse
+ 100... right on, Smoke !!
Hi,
I am new to this, my infuse is running stock everything. Firmware 2.3.6, build number: Gingerbread UCKL2.
I would like to upgrade to the latest Jellybean version. I tried to read all tutorials but cant make heads or tails. I was hoping someone could walk me through it all step by step. maybe by messenger or email?
any help would be greatly appreciated.
Okay, first you need to get yourself a cwm recovery.
To do that, flash Entropy's dd kernel.
Qkster has a heimdall one-click which you can use to flash it in download mode.
You will probably also need the GB bootloaders. Qkster also has one for that.
Now you just flash ICS, then a JB rom and you should be done.
There's a guide on my signature which explains all this step by step, with links and everything. I suggest you take a look at it.
andros11 said:
Okay, first you need to get yourself a cwm recovery.
To do that, flash Entropy's dd kernel.
Qkster has a heimdall one-click which you can use to flash it in download mode.
You will probably also need the GB bootloaders. Qkster also has one for that.
Now you just flash ICS, then a JB rom and you should be done.
There's a guide on my signature which explains all this step by step, with links and everything. I suggest you take a look at it.
Click to expand...
Click to collapse
After doing all this, are there any apps that wont work??
mrekimf said:
After doing all this, are there any apps that wont work??
Click to expand...
Click to collapse
OK, after following the "[GUIDE] How to flash JB " on andros11 signature, on the install I) GB to ICS, I used method B. After step 2 in method B, when do I do step 3? It is sitting at title screen that shows, "Galaxy S cyanogen(mod). I did the step 3 then and selected boot recovery, and it just stays on the "Galaxy S cyanogen(mod)" screen. Is it frozen? What did I do wrong?
PLEASE HELP
Yea, it is supposed to hang at that screen.
Take out the battery and boot into recovery with the 3 finger combo (hold both volume buttons and the power button, and let go of power once the samsung logo pops up
andros11 said:
Yea, it is supposed to hang at that screen.
Take out the battery and boot into recovery with the 3 finger combo (hold both volume buttons and the power button, and let go of power once the samsung logo pops up
Click to expand...
Click to collapse
So how long is it suppose to hang like that? Minutes, hour?
Also when in recovery it say on bottom of screen(log I guess) cache couldn't mount?
It hangs because you now have an ICS kernel with a GB system, so it won't boot.
If you do the 3-finger combo correctly it should boot to the recovery. Now you just need to flash a JB Rom and the corresponding gapps
Hi all,
I had a rooted GB 2.3.6 done with the Odin method here and I just upgraded to ICS and CM9 via the Entropy and everything worked ok, including making phone calls.
Then I went ahead and installed SlimBean 3.0/SlimGapps and I seem to be unable to make phone calls because it says Broadband version: Unknown. I'm now on JB 4.2.2 on SGH-1997
I am on Samsung Infuse 4G with ATT and I am not sure how to restore my mobile radio network. Can someone help me how to restore my phone calling feature and HSPA+ data network? Do I need to flash something?
Thanks,
Fanirama, try flashing cm10. That usually restores the IMEI.
Then flash back to slim and hopefully you'll be good
andros11 said:
Fanirama, try flashing cm10. That usually restores the IMEI.
Then flash back to slim and hopefully you'll be good
Click to expand...
Click to collapse
Great! That did the trick... I flashed CM10.1 and IMEI is back along with everything else.
Maybe I'll stick with CM10 for sometime and see how it goes. I kinda preferred Slimrom from what I saw of it - it was very zippy, very polished with very few bugs from limited testing I did on main features.
Sadly in all this fiasco, I lost all my contacts which is a major bummer. Hopefully Titanium Backup which I did kept my contacts.
Thank you very much for your help. I was planning on flashing Carbon next but I think CM was a better suggestion.
Can I upgrade my wifes Samsung i897(captivate) with the same stuff as I did with Infuse. Is it upgradable to JB?
Nope.. You'll want to visit the captivate forums to see what is available. Many good devs over there.
Sent from my SAMSUNG-SGH-I997 using xda premium
Zen Arcade said:
Nope.. You'll want to visit the captivate forums to see what is available. Many good devs over there.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
thank you , heading that way now!
Hello everyone,
It's my first time witnessing this issue, I do have a Samsung Galaxy S 4G. So I decided to upgraded Eclairs to Gingerbread. Which I did.
Somehow I downloaded the CM7 ROM in the SGS 4G section, I have flashed it and now everytime I click "reboot system now", it's just putting me back to CWM Recovery over and over again. Now I got tired of it, so I tried flashing the SlimBean in hopes of making my device work the way they should, but it's the same result. When I cleared data, flashed the ROM and Gapps and when I click "reboot system now", It shows the boot screen but then it transferred me back to recovery. I don't really know what to do.
Urgent help needed. Thank you all.
can you acess into download mode?
PuNeTZzZ said:
can you acess into download mode?
Click to expand...
Click to collapse
Yes I can, also tried it with CM9, same results it shows recovery everytime. I need some help. :crying:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
You are missing the boot loader if you went straight to Gingerbread. Use Heimdall One Click to flash to Gingerbread. Also click on the bootloader option as well when you flash.
Sent from my SGH-T959V using xda premium
Theraze said:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
Click to expand...
Click to collapse
Can you give me the names of the GB one-click?
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
champ1919 said:
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
Click to expand...
Click to collapse
Can anyone tell me this guide works on starting from a CM7 Rom. I don't get it at all. Since it started from Stock Froyo.
tried to root my Skyrocket, tried to put on latest cm10.1 nightly, got system 7 error, someone said to format. Did so, now it won't go past the samsung screen. Can someone help me fix my newb-ness?
Noobs have no business messing with nightlies.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Noobs have no business messing with nightlies.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
thanks for stoppin' by
lookslikescreech said:
thanks for stoppin' by
Click to expand...
Click to collapse
Np, enjoy the skyrocket!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
lookslikescreech said:
tried to root my Skyrocket, tried to put on latest cm10.1 nightly, got system 7 error, someone said to format. Did so, now it won't go past the samsung screen. Can someone help me fix my newb-ness?
Click to expand...
Click to collapse
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Fall of Enosis said:
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Click to expand...
Click to collapse
Uh status 7 is assert protection so its a mismatch usually in device info typically model numbers, and has nothing to do with bad downloads.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Fall of Enosis said:
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Click to expand...
Click to collapse
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
lookslikescreech said:
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
Click to expand...
Click to collapse
Yeah, stay stock until you have a clue on what you're doing.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
lookslikescreech said:
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
Click to expand...
Click to collapse
In this section (q&a), read through "the ultimate newb guide" by vincom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
btm fdr said:
In this section (q&a), read through "the ultimate newb guide" by vincom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thanks, on it now. Just need to get it back to stock with Odin then I'll try again when I understand what I'm doing more.
Anyone feeling charitable and want to tell me how to flash the stock rom with Odin? I'd appreciate it.
lookslikescreech said:
thanks, on it now. Just need to get it back to stock with Odin then I'll try again when I understand what I'm doing more.
Anyone feeling charitable and want to tell me how to flash the stock rom with Odin? I'd appreciate it.
Click to expand...
Click to collapse
It's in the guide bro
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Best of luck mate, reply here if you have any issues. And for pete's sake, next time, instead of watching a YouTube video, read read read and re-read the forums. Once that's done, read them again. Only then, start flashing.
Fall of Enosis said:
Best of luck mate, reply here if you have any issues. And for pete's sake, next time, instead of watching a YouTube video, read read read and re-read the forums. Once that's done, read them again. Only then, start flashing.
Click to expand...
Click to collapse
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
lookslikescreech said:
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
Click to expand...
Click to collapse
Bro, you're going to end up with a paperweight. That guide is step by step. Read it, read it again.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
lookslikescreech said:
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
Click to expand...
Click to collapse
That's an alternate form of DL mode. Odin a stock ROM from that screen. Read the Noobs Guide. Odin is finicky so pay attention to the guide. Then read it again. Once you've read and comprehend it all spin in a circle saying "I deserve this" three times and Odin will grant your wish. lol
hechoen said:
That's an alternate form of DL mode. Odin a stock ROM from that screen. Read the Noobs Guide. Odin is finicky so pay attention to the guide. Then read it again. Once you've read and comprehend it all spin in a circle saying "I deserve this" three times and Odin will grant your wish. lol
Click to expand...
Click to collapse
hahaha thanks
Got it working, used TWRP to flash the latest RC CM 10.1
Got it all going now after a minor heart attack and a few more grey hairs. Just gotta figure out why the wifi isn't working at all now. Can't get it to turn on.
Your original 'system error 7' problem was most likely caused by trying to flash a newer ROM with an older version of CWM or TWRP. Glad you got the phone up, can't help you with the wifi problem, sorry. Although, what modem did you flash, if any? System Settings -> About phone -> Baseband version?
Tom
rpr69 said:
Your original 'system error 7' problem was most likely caused by trying to flash a newer ROM with an older version of CWM or TWRP. Glad you got the phone up, can't help you with the wifi problem, sorry. Although, what modem did you flash, if any? System Settings -> About phone -> Baseband version?
Tom
Click to expand...
Click to collapse
I flashed the UXUMA7 radio, didnt really do much, it worked before.
Still can't figure out the Wifi though :-/ just straight up won't turn on.
If you are on a newer CM 10.1 , the only supported radio is UCMC1, UXUMA7 is really old. That may be why wifi is not working.
UXUMA7 and UCMC1 are very similar. First one is the Rogers and second is att's release which is usually late by a month or so after rogers. Bottom line both will work.
Have your radiofile.zip, cm10.1.zip, and gapps from 20130301 all on your SD card.
Do you have a back up, nandroid? If not do it now.
Go to recovery and Clean up well:
Go to mounts and format data, system, cach twice or three times. Go to advanced and clean dalvik cache. Don't reboot
Now installing in this order:
- radio
-cm10.1
-gapps
Now reboot your phone.
Wait until it is finished and leave it untouched for 10 minutes to settle down and do its thing.
Then turn it off back on and enjoy.
Your noob status will start to fade if you do a clean install :thumbup:
Sent from my SAMSUNG-SGH-I727 using xda app-developers app