Tried installing different roms and it still reboots back into recovery and have also tried flashing other recoveries any help?
http://forum.xda-developers.com/showthread.php?p=17258229
Sent from my LG-P999 using Tapatalk 2
djvoleur said:
http://forum.xda-developers.com/showthread.php?p=17258229
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
im actually on that right now lol hope it works
I tried it and it worked was able to boot into device into stock however I flashed CW and tried to install a custom rom on it and it just reboots into cm again
Of course it works... because it happened to me too
Sent from my LG-P999 using Tapatalk 2
My device was working just fine in the A.M. as I flashed from Genesis (ICS) back to Lezo OS (GB) over to Joy OS (also GB). When I tried to restore a backup of my Genesis ROM I was more than delighted to see that upon trying to reboot I was unable to boot out of recovery. Now I've done everything in the linked post up to about step 10 where I kinda get stuck. I run the Flash but get nothing. At this point I'm just hoping for a Solid solution. Someone PLEASE assist
Boot_Derran said:
My device was working just fine in the A.M. as I flashed from Genesis (ICS) back to Lezo OS (GB) over to Joy OS (also GB). When I tried to restore a backup of my Genesis ROM I was more than delighted to see that upon trying to reboot I was unable to boot out of recovery. Now I've done everything in the linked post up to about step 10 where I kinda get stuck. I run the Flash but get nothing. At this point I'm just hoping for a Solid solution. Someone PLEASE assist
Click to expand...
Click to collapse
Try this way. Anytime I soft brick my G2x, this is how I rebuild it.
You'll need that ROM you got from previous thread, I do believe.
It will push a fresh recovery, than you can just go back to flashing the ROM.
justjackyl said:
Try this way. Anytime I soft brick my G2x, this is how I rebuild it.
You'll need that ROM you got from previous thread, I do believe.
It will push a fresh recovery, than you can just go back to flashing the ROM.
Click to expand...
Click to collapse
Edit: I have then since followed the directions EXACTLY and now I'm back in business. Much appreciated
Boot_Derran said:
Edit: I have then since followed the directions EXACTLY and now I'm back in business. Much appreciated
Click to expand...
Click to collapse
Your welcome. Glad i could steer you in the right direction and it worked for you!
Sent via Acer Iconia A100 on CM10_Build090212; godmachine v2.0 kernel, Smooth, Stable, Fast
if rebooting loop caused by installing new soft, try looking at this thread. its helped me
http://forum.xda-developers.com/showthread.php?t=2451696
Related
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
DX2Trip said:
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
Click to expand...
Click to collapse
Hey, and sort of welcome back...
But I hate to be the bearer of bad, bad news... you have a softbrick, and there is NOTHING you can do.
Next time, read everything in an OP... LOL, look who I am telling this to....
The CM10 installs come with their own CWM built in, and flashing bootstrap is what bootlooped you, so after you get another warranty replacement (yes, you HAVE to do this), I would install leak #1 ONLY, then flash cm10 with bootstrap, then do not reinstall any boot hijacks or CWM "like" recovery (bootmenu), because all you have to do it hit the vol down button right as you see the blue led flash during the M dual core logo.
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
tcf38012 said:
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
Click to expand...
Click to collapse
he can't, he installed bootstrap while on cm10m, so he can't get to cwm anymore.
Scratch that ----- Deleted
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
DX2Trip said:
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
Click to expand...
Click to collapse
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
jimbridgman said:
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
Click to expand...
Click to collapse
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
lkrasner said:
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You know, I was seeing in recovery how youbcan flash an update through sd AND system which has a lost and found folder and recovery folder. Dont know if this is of any info but either way because I wouldnt know how to put anything in system since I cant seem to get adb to recognize or moto-fastboot...I'm in a very confused state of mind and almost came to the point of hard brick but I refuse. I'll leave it up to ya devs. Thanks againg everyone.
Sent from my MB870 using xda premium
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
justdrew said:
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
First Softbrick it seems In Trouble
jimbridgman said:
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
Click to expand...
Click to collapse
Guys need your urgent help i am into a trouble what is it called technically may be a Soft brick but this is what has happened.
I was trying the Magic mod the installation went superb booted the phone it worked properly and then i used the bootstrap :silly: and tried starting the phone in recovery after which my phone is now stuck at magic mod boot animation. PLEASE HELP.
I am upto a point where have installed drivers latest rsd lite 6.0 ready with the extracted fxz 6.7.2_EDEM-18-SEARET_cfc.xml but phone is not showing up in rsd lite so that i can flash my phone. Phone says USB connected in AP Fastboot mode have a look at the attachment of my desktop. Please HELP guys....
Thanks & Regards,
Beginner Android (Ravi D)
havent you just posted this in the any question answered here thread and getting help there ??
Wow, almost forgot I made this thread lol. But sounds like your drivers need a good updating. Reboot PC after updating and try again is all I can say. Hope this helps.
Sent from my MB865 using xda premium
Hello,
I'm truly hoping someone can help me. I spent all night installing new roms on my phone. Ok let me back up. This is bout the tenth phone I've rooted. I rooted my blaze about 2 months ago using a one step(I think can't remember.) I never really installed a custom Rom until last night. The first Rom I installed was cm10, which I liked. Only problem was I couldn't mount my sd card because I am no where near a computer. So I decided to install the baked Rom. I was ecstatic to find that everything worked. However, the cm10 Rom seemed to be running at the same time. I found that very weird. So I tried to figure out a way to get the cm10 off my phone. For hours I tried wiping and reformatting different things from recovery. My problem is the last time I rebooted my blaze out wouldn't go past the Samsung screen. I've tried all combos of the volume up down and power key and it never goes past Samsung. I'm assuming I've bricked my. It will show the battery charging screen. 1st it'll show the stock screen then the baked screen for charging. Please help me. I've searched xda for help and can't find anything to help.
Ps. I'm not at a computer now but please list help for when I'm able to get to one. And yes I've only gotten about 3hrs of sleep in the last 20hrs from messing with my phone.
Sorry for posting in development first meant to post here.
Odin to stock uvlh5. From sammobile.com/firmware
Edited... because I speak without thinking
^ what he means is download the stock ICS ulvh5 firmware from sammobile.com/firmware for the blaze/sgh-t769 and flash it on Odin.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Thats why I have the sammobile firmware and odin on a backed up. I've tried to learn from my mistakes well that's what I have learned a lot here hahahaha
Oh i remember reading you are not around a PC a lot... you need a PC for ODIN sounds like you can't get into recovery so PC only other way I know of. If I helped push thanks
how do you flash it exactly
myssdion said:
how do you flash it exactly
Click to expand...
Click to collapse
Dude just Google your quote plus a few more words and follow instructions.
Or this http://forum.xda-developers.com/showthread.php?t=1591601 . If your soft bricked you need to go back to gingerbread. Than upgrade accordingly ICS than jelly whatever. Hope works out for you
jbats said:
Dude just Google your quote plus a few more words and follow instructions.
Or this http://forum.xda-developers.com/showthread.php?t=1591601 . If your soft bricked you need to go back to gingerbread. Than upgrade accordingly ICS than jelly whatever. Hope works out for you
Click to expand...
Click to collapse
Yeah, I thought about that right after I asked. Thanks for the help. Got my phone back to working with a custom rom I'm too happy
myssdion said:
Yeah, I thought about that right after I asked. Thanks for the help. Got my phone back to working with a custom rom I'm too happy
Click to expand...
Click to collapse
Glad to hear that
I'm trying to get Mazout360's dual booting to work on my phone, but it just gets stuck bootloop-ing. I'm trying to boot his ROM and EaglesBlood 2.3.3
mlmacias123 said:
I'm trying to get Mazout360's dual booting to work on my phone, but it just gets stuck on the second LG boot screen. I'm trying to boot his ROM and EaglesBlood 2.3.3
Click to expand...
Click to collapse
Make sure to follow the instructions to the letter. Double check you'll be doing each step correctly before going through the process. I read through the post several times before I felt comfortable going for it, and still ran into problems. I seem to remember getting it stuck after using system switcher in the jelly bean rom to go back to the gingerbread rom. If this is your issue, make sure your boot1.img is set up correctly and try reflashing in cwm. If this is not your issue, please elaborate about what's going on and what you did to get to where you are.
Sent from my LG-P999
adamiscool said:
Make sure to follow the instructions to the letter. Double check you'll be doing each step correctly before going through the process. I read through the post several times before I felt comfortable going for it, and still ran into problems. I seem to remember getting it stuck after using system switcher in the jelly bean rom to go back to the gingerbread rom. If this is your issue, make sure your boot1.img is set up correctly and try reflashing in cwm. If this is not your issue, please elaborate about what's going on and what you did to get to where you are.
Sent from my LG-P999
Click to expand...
Click to collapse
Im going to try with the Cyanogenmod 7.2 rom from their site, i'll get back to you when i finish it, which shouldn't take long
adamiscool said:
Make sure to follow the instructions to the letter. Double check you'll be doing each step correctly before going through the process. I read through the post several times before I felt comfortable going for it, and still ran into problems. I seem to remember getting it stuck after using system switcher in the jelly bean rom to go back to the gingerbread rom. If this is your issue, make sure your boot1.img is set up correctly and try reflashing in cwm. If this is not your issue, please elaborate about what's going on and what you did to get to where you are.
Sent from my LG-P999
Click to expand...
Click to collapse
I got it to work with the cyanogenmod 7.2 rom i went ahead and thanked you for your help
Hello everyone,
It's my first time witnessing this issue, I do have a Samsung Galaxy S 4G. So I decided to upgraded Eclairs to Gingerbread. Which I did.
Somehow I downloaded the CM7 ROM in the SGS 4G section, I have flashed it and now everytime I click "reboot system now", it's just putting me back to CWM Recovery over and over again. Now I got tired of it, so I tried flashing the SlimBean in hopes of making my device work the way they should, but it's the same result. When I cleared data, flashed the ROM and Gapps and when I click "reboot system now", It shows the boot screen but then it transferred me back to recovery. I don't really know what to do.
Urgent help needed. Thank you all.
can you acess into download mode?
PuNeTZzZ said:
can you acess into download mode?
Click to expand...
Click to collapse
Yes I can, also tried it with CM9, same results it shows recovery everytime. I need some help. :crying:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
You are missing the boot loader if you went straight to Gingerbread. Use Heimdall One Click to flash to Gingerbread. Also click on the bootloader option as well when you flash.
Sent from my SGH-T959V using xda premium
Theraze said:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
Click to expand...
Click to collapse
Can you give me the names of the GB one-click?
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
champ1919 said:
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
Click to expand...
Click to collapse
Can anyone tell me this guide works on starting from a CM7 Rom. I don't get it at all. Since it started from Stock Froyo.
I've been trying to flash CyanogenMod using the instructions on their website for a good week or so in collaboration with a general search of the internet. So far all I've managed to do is soft brick my tablet multiple times.
Here are the problems I've seen so far
ClockworkMod Recovery doesn't work on this tablet anymore
TWRP should be able to install cyanogenMod but for whatever reason just wipes the whole of the system folder
I can't seem to find directions on how to manually install cyanogenMod anywhere on the internet (the stock asus rom can be flashed fairly simply using fastboot)
Sorry about not being able to post a link!
Has anyone been able to install CM10 on their TF300T and if so can they link me to the directions they followed?
Thanks!
Have a look in the Development forum
http://forum.xda-developers.com/showthread.php?p=44823836
Sent from my NookColor using Tapatalk 4
Thanks!
kozmo2k4 said:
Have a look in the Development forum
http://forum.xda-developers.com/showthread.php?p=44823836
Sent from my NookColor using Tapatalk 4
Click to expand...
Click to collapse
Worked like a charm in the way that it installed and I got the cyanogenMod boot screen to show up. Now I am thinking it is stuck on the boot screen and looping. Any ideas for a fix?
harend said:
Worked like a charm in the way that it installed and I got the cyanogenMod boot screen to show up. Now I am thinking it is stuck on the boot screen and looping. Any ideas for a fix?
Click to expand...
Click to collapse
Wipe Data, Dalvik, and Cache before flashing CM. Usually bootloops for me if not.
That did the trick!! Thank you so much! Now running android 4.3.1 on my TF300T!!!