[APP][ROOT]Zram & Swap Ctrl V2.5.5[14.4.13]>>Zram|cache|Partition NEW!FAST CACHE SWP!
Features:
Slider Controls for:
>>> Zram virtual disk size selection slider
>>> Cache based Soft swap using a swap file in the fast cache partition. With is own size selection slider.
>>> Swappiness selection slider with instant setting.
>>> Hard swap via a swap partition if available on your ExtSD card.
>>> Independent ON/OFF toggles for the three supported types... ( yes you can try combinations!! )
>>> Immediate set button and a save whichever configuration is current to init.d boot scripts.
>>> Requirements a kernel with swap support and zram but you can use the other features without zram support.
This was developed for Perseus but should work with any kernel that supports Zram/swap.
V2.1 -fixed swappiness not setting correctly.
V2.2
-Made with tasker V4
-Set on boot will now disable zram on boot if zram is disabled when boot button tapped.
V2.3.2
-Running dialogs
-Now with internal memory cache file situated Swap option.
-improved Boot-set init.d support.
-fixed init.d creation bug and other minor bugs
V2.5
-swap priority setting with custom busybox install
-FASTER cache based swap with 4 parallel swap files set with equal priority
- revamped UI
---------------------------------------
This was developed for Siyah and Perseus but should work with any kernel that supports Zram/swap.
IMPORTANT: please make sure super su app re-grants permissions after install!!
---------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------------
This was developed for Siyah and Perseus but should work with any kernel that supports Zram/swap.
IMPORTANT: please make sure super su app re-grants permissions after install!!
---------------------------------------
Thanks to mattiadj (best multitasking fix) for the concept of cache file-based swap
And Gokhan Moral for his ongoing help as I learn shell scripting
---------------------------------------
---------------------------------------
UPDATE: Zram & Swap Ctrl V2.5.5
>>2.5.5 Tweaked 'dd' command which makes the swap files. should eliminate wrong size creation.
>>2.5.5 Cache size detection should work on CM10.1 roms and limit slider to 100MB less than the total free space.
>>2.5.5 Scrapped timeout and auto-rotate settings. will make landscape scenes eventually.
DOWNLOAD: http://db.tt/cQcrOM3C
CWM busybox install if app install fails:
http://db.tt/BPJPR8jI
(NOTE: the busybox will not affect your rom busybox and will only be used by this app)
---------------------------------------
---------------------------------------
>>>UPDATE: Zram & Swap Control V2.5.1<<<
DOWNLOAD: http://db.tt/rG1B0WVu
-Bug fix: 2.5>>2.5.1 App will now make the data folder: /sdcard/Android/data/siyahmods/ if not present.
EXCLUSIVE NEW FEATURE!!
- Swap PRIORITY settings made possible via a custom busybox which the app will download and Auto-install.
---------------------------------------
NOTE!! This custom busybody WILL NOT replace your main busybox. So don't panic. Only this app will use it. It will reside in /system/bbsiyahmods/
---------------------------------------
- Q: Why is a custom busybox necessary?
A: Because the pared down version of busybox used in CM and many other ROMs does not have the ability to set swap priorities.
- Q: What is so special about being able to set swap priorities?
A: Linux sets the priority in order that to make them active. So to activate a Hard swap partition for example it is necessary to first turn off zram and turn it on again after to ensure it has the highest swap otherwise it won't be used properly.
- Swap activation is much faster now!
A2: Secondly it is now possible to set several swaps with THE SAME priority. So you can have several swaps used equally. I had a theory that perhaps using several swap files in /Cache might make the overall swap work faster... AND IT DOES!!
- CACHE BASED HARD SWAP IS NOW MUCH FASTER!.... (using 4 parallel swap files set with equal priority)
Please before anyone disses this claim please try it for yourself. I don't know the technical reason why but there is no doubt it improves performance markedly!
Re: [APP][ROOT] Zram & Swap Ctrl V2.3.2 [2.4.13] >>Zram|cache|Partition
Reserved...
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Reserved...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man for this really useful app which is the only one of its kind till now.
I just have 2 bugs to report. The first one is that after enabling file swap and setting it to the max, everythig goes well. But after opening your app after a while, I find it disabled again for no apparent reason.
The second bug which I have no idea how it relates to your app is that my s3 screen stopped rotating and did not timeout. I found that the auto rotate option was unchecked and the screen timout was set to 10 mintues. I never had this issue before and the only thing that I was working with when this happened was the zram control.
Thanks again.
Re: [APP][ROOT] Zram & Swap Ctrl V2.3.2 [2.4.13] >>Zram|cache|Partition
Yazan76 said:
Thanks man for this really useful app which is the only one of its kind till now.
I just have 2 bugs to report. The first one is that after enabling file swap and setting it to the max, everythig goes well. But after opening your app after a while, I find it disabled again for no apparent reason.
The second bug which I have no idea how it relates to your app is that my s3 screen stopped rotating and did not timeout. I found that the auto rotate option was unchecked and the screen timout was set to 10 mintues. I never had this issue before and the only thing that I was working with when this happened was the zram control.
Thanks again.
Click to expand...
Click to collapse
Thanks for the bug report. Yes the auto rotate and timeout changes are supposed to revert back but it's broken it seems
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Thanks for the bug report. Yes the auto rotate and timeout changes are supposed to revert back but it's broken it seems
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
+1
after reboot the settings gone.
Xperia P / ICS!
4rch0 said:
+1
after reboot the settings gone.
Xperia P / ICS!
Click to expand...
Click to collapse
OK please look in your init.d folder and make sure you have files there.
You have to tap set on boot after changes made... But there could be some other bug
Sent from my GT-I9300 using Tapatalk 2
Will try to sgy..
edit-
Cant installing min sdk ver 14.. can u build with min sdk ver 10 ??
Thanks
savie said:
Will try to sgy..
edit-
Cant installing min sdk ver 14.. can u build with min sdk ver 10 ??
Thanks
Click to expand...
Click to collapse
Sure!
Sent from my GT-I9300 using Tapatalk 2
•°•♡ⓣⓗⓐⓝⓚⓢ♡ •°•
for sharing.
Testing on SGM
Sent from my GT-S5570 using Tapatalk 2
rlorange said:
Sure!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Guys I can't build with compatibility below 14 with the new tasker V4... However I have dual boot on my phone so I will install the old version of tasker on my other ROM to do this for this thread... In the mean time everyone can follow the main version on my SGS3 app thread...
http://forum.xda-developers.com/showthread.php?p=39650148
[APP][12/4/13]Zram & Swap Control [CACHE & PARTITION] V 2.4.1 FIXED 2.4!
Update: V2.4.1
Big improvements!
>> faster load new style
>> info popups and swap active data info button
>> fixed busybox issue... Basically only some versions of busybox support swap priority settings and my detection system was CRAP! So now if you have hard or soft swap already active and set zram to have both active. All active swaps are first switched off so zram can bev switched on first guaranteeing it has the highest priority OTHERWISE IT WON'T BE USED UNTIL YOUR OTHER SWAP IS FULL!!
this is complicated to please use the new "i" button to check swap status and report any problems with this... Remember if zram is active it should always have a priority of -1 or it won't be active until other swaps are full.
I hope I have got all possible combinations accounted for... Argh hurt my brain this one
Sent from my GT-I9300 using Tapatalk 2
Bugfix update: V2.5.1
http://db.tt/rG1B0WVu
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Bugfix update: V2.5.1
http://db.tt/rG1B0WVu
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
thanks sir.. really great job ! will try it
rlorange said:
Bugfix update: V2.5.1
http://db.tt/rG1B0WVu
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
rlorange,
Although I used your app successfully on my s3, I had an issue using it on my xoom related to the app interface problem running in landscape mode. I however managed to overcome this issue by using a rotate lock app to force your app to run in portrait mode.
I still have one problem left is that hard swap is not working since it can't detect the swap partition. My xoon sd card second partition is a primary linux swap partition, and hard swap worked fine on the same sd card on my s3.
The xoom is running Android 4.2.2 and the s3 is running 4.1.2
What are your thoughts on this?
Yazan76 said:
rlorange,
Although I used your app successfully on my s3, I had an issue using it on my xoom related to the app interface problem running in landscape mode. I however managed to overcome this issue by using a rotate lock app to force your app to run in portrait mode.
I still have one problem left is that hard swap is not working since it can't detect the swap partition. My xoon sd card second partition is a primary linux swap partition, and hard swap worked fine on the same sd card on my s3.
The xoom is running Android 4.2.2 and the s3 is running 4.1.2
What are your thoughts on this?
Click to expand...
Click to collapse
OK glad you got it working on your zoom!
I'm sure it will be hit and miss using on a device other than an S3...
This is what I use to detect swap:
fdisk -l /dev/block/mmcblk1| grep swap | awk '{print $1}'
So I guess the SD card Mount terminology is dissent l different for the zoom.
Do you know which block is your extSD?
Sent from my GT-I9300 using Tapatalk 2
I'm getting missing library error when installing the apk file. Tried installing the usual and using the terminal.
Running on a MIUI based rom.. JB 4.1.2. Would love to get zram up and running as my phone only has 512 mb ram
rlorange said:
OK glad you got it working on your zoom!
I'm sure it will be hit and miss using on a device other than an S3...
This is what I use to detect swap:
fdisk -l /dev/block/mmcblk1| grep swap | awk '{print $1}'
So I guess the SD card Mount terminology is dissent l different for the zoom.
Do you know which block is your extSD?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I think it is /dev/block/mmcblk0p2
But how can I know for sure?
Put this into terminal emulator
fdisk -l /dev/block/mmcblk0| grep swap | awk '{print}'
Sent from my GT-I9300 using Tapatalk 2
UPDATE: Zram & Swap Ctrl V2.5.5 [/B]
>>2.5.5 Tweaked 'dd' command which makes the swap files. should eliminate wrong size creation.
>>2.5.5 Cache size detection should work on CM10.1 roms and limit slider to 100MB less than the total free space.
>>2.5.5 Scrapped timeout and auto-rotate settings. will make landscape scenes eventually.
DOWNLOAD: http://db.tt/cQcrOM3C
CWM busybox install if app install fails:
http://db.tt/BPJPR8jI
(NOTE: the busybox will not affect your rom busybox and will only be used by this app)
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Put this into terminal emulator
fdisk -l /dev/block/mmcblk0| grep swap | awk '{print}'
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
This is what i get.
[email protected]:/ $ su
[email protected]:/ # fdisk -l /dev/block/mmcblk0| grep swap | awk '{print}'
/dev/block/mmcblk0p2 85121 121216 1155072 82 Linux swap
[email protected]:/ #
Thank you a lot for the last update. Hard swap seems to be working correctly. When I hit 'i' it shows hard swap size of 1 GB although the app interface shows that hard swap is on with size of 0.
Can this damage our internal memory of the phone , s3 already suffers from a emmc bug so i dont want to speed the brick time .
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EAGLESBLOOD™ "ICE CREAM SANDWICH" 4.0.3
BASED OFF CM9 UNRELEASED SOURCE.THIS IS NOT A KANG OF "Arcee's ROM" ...BUT WITHOUT HIM NONE OF THIS COULD
HAVE BEEN DONE, 'THANK YOU' FROM ALL OF US.
Click to expand...
Click to collapse
Also BIG THANKS TO CM-TEAM for they're amazing work without these guys hard work and great features none of this would be possible for me and other developers building Roms.
Who is EAGLESBLOOD ?
[*] doniqcc
[*] Boxer
[*] cellsafemode aka CSM
SPECIAL THANKS TO "B0XeR" FOR ALL OF HIS WORK AND DESIGN ON THIS BUILD.
THANK YOU TO EVERYONE ELSE WHO HAS HELPED AND SUPPORTED US.
SCREENSHOOTS :
PLEASE READ THE F.A.Q. BY Deadstyle HERE
Features:
Code:
*4.0.3 ICS/IML74K
*Based off the Unofficial CM9 source
*EB performance/Tweaks/Scripts
*Fully optimized
*Zipalign on each boot
*Smother/Faster UI
*Ext4 tuneup
*Ganoptimizer
*UMS-USB Mass Storage (csm)
*Added IO scheduler under performance settings (cellsafemod)
5 different settings to choose from :
noop
anticipatory
deadline
cfq
bfq
*Mark all read option to email.apk
*Added quiet hours under sound settings
*EB launcher2 Tweaked built off cm9 (fast no lag)
now you can access launcher settings by pressing menu in home screen
*EB boot animation/splash screen (Boxer)
*EB wallpapers(Boxer)
*Distinguishable data between 3G/H
*Added EBloodmod version/about phone
*Added FB Sync (RomanB)
*Added option for restoring all your apps soon as you sign
*Added profiles settings
*Removed Themes under settings since it's useless for now looks clean
CHANGELOG
Code:
[CENTER][INDENT]
[SIZE="4"]
[COLOR="Red"][B]Build 3[/B][/COLOR][/SIZE]
*UMS-USB Mass Storage (csm)
Lets you access your SD card on a computer
like a flash drive coded from scratch by csm
the very first ics rom that supports it
*Fixed Mute from not functioning at all (csm)
*Modified Trinity kernel (Morfic/Csm)
This is a modified Trinity kernel by Csm
flashing a different will cause an infinite boot loops
plus you'll loose UMS feature
*Added profiles
*Removed Cfq & Bfq schedulers under performance
Deadline is now default
*Always recommended a full wipe but flashing over bld 2 should be fine
*Updated gapps
*Trinity + EB = butter :)
[SIZE="4"]
[COLOR="Red"][B]Build 2[/B][/COLOR][/SIZE]
*EB performance/Tweaks/Scripts
*Fully optimized
*Zipalign on each boot
*Smother/Faster UI
*Ext4 tuneup
*Ganoptimizer
*Added IO scheduler under performance settings (cellsafemod)
5 different settings to choose from :
noop
anticipatory
deadline
cfq
bfq
*Mark all read option to email.apk
*Added quiet hours under sound settings
*EB launcher2 Tweaked built off cm9 (fast no lag)
now you can access launcher settings by pressing menu in home screen
*EB boot animation/splash screen (Boxer)
*EB wallpapers(Boxer)
*Distinguishable data between 3G/H
*Added EBloodmod version/about phone
*Added FB Sync (RomanB)
*Added option for restoring all your apps soon as you sign in
*Removed Themes under settings since it's useless for now looks clean
Profiles it's there will add setting in build 3
[SIZE="4"]
[COLOR="Red"][B]Build 2[/B][/COLOR][/SIZE]
*Initial release
[/INDENT][/CENTER]
=======================================
IMPORTANT NOTES:
=======================================
These Builds are built off unofficial source of the current state of CyanogenMod 9
CM 9 is based on latest AOSP sources plus some usefull tweaks and features.
=======================================
SOURCECODE:
=======================================
https://github.com/CyanogenMod
=======================================
EAGLESBLOOD™ ROM INSTALL INSTRUCTIONS:
=======================================
**IMPORTANT** - MUST READ CAREFULLY AND FOLLOW COMPLETELY
1. Make a full backup of your current ROM. Then copy it over to PC if you wish.
2. Reboot into ClockworkMod Recovery (CWM). *Note* You should always flash CWM using a USB Cable and NVflash; do not 'flash CWM from the ROM Manager app'.
3. To begin start by clicking "Wipe User Data/Factory Reset", this will wipe all data off of the phone's memory (not SD card though).
4. Now click "Wipe cache partition".
5. Then go down to "Advanced > Wipe Dalvik cache".
6. Choose Install zip from "External SD Card". Wait for that to complete and confirm you see an "Installation Complete" message.
7. Now, you must flash the correct Google Apps - GApps ICS (gapps-20120212-ics.zip) ...link below.
Once the gapps are installed you can now click "Reboot System". Failing to complete all of these instructions precisely can potentially leave you stuck in
CWM Recovery until you manage to build your way back out. This is not fun, trust us.
9. Done. Enjoy your new ROM!
=======================
DOWNLOAD LINKS:
=======================
== EAGLESBLOOD™ ICS ROM bld 3
== GAPPS FOR ICS
=======================
=======================
CHECKOUT OUR POST IN THE "THEMES" FORUM FOR ALL KINDS OF GREAT DOWNLOADS!
VISIT HERE
EAGLESBLOOD™ ROM TEAM:
EB ROM DEVELOPER | Doniqcc
EB GRAPHIC DESIGNER | IB IO IX IE IR
========== ATTENTION: SHOW YOUR SUPPORT FOR EAGLESBLOOD™ ==========
Everyone, feel free to show your support by using our FREE signature banner designed just for you!
ANYONE CAN USE THIS CUSTOM SIGNATURE!:
EaglesBlood by doniqcc. Get it
[HERE].
BOOT ANIMATIONS:
Bootanimation UPDATE for EaglesBlood™ 4.0.x (Current Release)
===========
HOW TO CHANGE BOOT ANIMATION INSTRUCTIONS:
1. Download the posted ZIP file either using your device, PC & USB, or however you'd like and save the bootanimation.zip file to the root of your SD CARD (i.e. /sdcard).
2. OTD, using "Root Explorer" navigate to /system/media and mount as "Read/Write" (r/w).
3. In that folder, rename existing bootanimation.zip to "bootanimation.zip.orig" and save. This is now your backup file.
4. Press "back" twice to get out of those folders and navigate again into /sdcard and find your bootanimation.zip that you already downloaded above.
5. Long-press the .zip file and select "Move", then navigate back into the /system/media folder and "Paste" it there.
6. Now long-press the new bootanimation.zip file that you just pasted and select "Permissions." Check/Uncheck the boxes to match this image below, then click Save:
7. Then click (R/O) to mount /system/media back to Read Only (r/o) then you exit Root Explorer.
8. Reboot and enjoy.
*TO REVERT BACK TO ORIGINAL BOOT ANIMATION: To revert to original bootanimation, (1)Go back into /system/media and mount (r/w). (2)Then delete the new bootanimation.zip file you previously added. (3)Rename "bootanimation.zip.orig" back to "bootanimation.zip", click Save. (5)Remount (r/o), then exit and reboot.
________________
DOWNLOAD EB ICS UPDATED BOOTANIMATION HEREhttp://www.mediafire.com/?el2ecgf855o5mw7.
(MD5SUM: B56AD68A5E264FAF5046AEB1A384F36F)
**This update only has slight animation/frame speed changes and minor cleanups.**
PREVIEW:
One more for me just in case
First
Thanks, going to try will report any bugs asap.
super.... thanks
Must flash! Thanks
Sent from my LG-P999 using xda premium
Omg omg, thanks for this and for being so awesome, one question, does this have wifi calling or can u get it implemented? Where i live is a dead zone but i want to run this mod,
Thanks
Awesome Job Don! It's really smooth and the battery life doesn't drain too fast! However I have a question, how would I mount emmc? I go to CWM and go to "Mounts and Storage" and once I mount emmc, I can see all of my files but once I boot to the ROM, emmc is empty...
Hope any of you know a fix! Thanks
EDIT: The fix for this is pretty simple. Props to the other fellas who found out how to do it. Simply get a Root Browser, go to System/Etc/vold.fstab then change the number 9 to an 8. That's all! This will mount your EMMC Partition
EDIT 2: Our video overview of EaglesBlood ICS Build 1.0...Sorry for the slightly bad audio, this happened because the mic got busted and we are currently looking for a replacement filming device...so yea I apologize in advance!
Build 1 Overview:
Build 2 Beta Overview:
Build 2 Full Version Overview:
Build 3 Review (March 24th):
Hope you liked it! If you did, please Comment and Subscribe on our Channel and if it's too much hassle to do that, simply press the Thanks Button we'd really appreciate it
FeloHFP said:
Omg omg, thanks for this and for being so awesome, one question, does this have wifi calling or can u get it implemented? Where i live is a dead zone but i want to run this mod,
Thanks
Click to expand...
Click to collapse
Yes it does this is just straight unofficial cm9 source a lots more to come on coming builds
AllAboutAndroids said:
Awesome Job Don! It's really smooth and the battery life doesn't drain too fast! However I have a question, how would I mount emmc? I go to CWM and go to "Mounts and Storage" and once I mount emmc, I can see all of my files but once I boot to the ROM, emmc is empty...
Hope any of you know a fix! Thanks
Click to expand...
Click to collapse
thanks for this
I appreciate it even though didn't show all features lol
to answer your question idk ICS uses different mounting points i soft bricked my phone couple of times lol when i was building source since partitions don't mount like GB, but did you try via root explorer under mnt/emmc and then copy/paste to SD ?
Thanks again for the video
doniqcc said:
thanks for this http://www.youtube.com/watch?v=C8zb294iedE I appreciate it even though didn't show all features lol
to answer your question idk ICS uses different mounting points i soft bricked my phone couple of times lol when i was building source since partitions don't mount like GB, but did you try via root explorer under mnt/emmc and then copy/paste to SD ?
Thanks again for the video
Click to expand...
Click to collapse
Haha thanks
As for the video to display all of the features...you have too many!
For the mnt/emmc, I have checked under the root browser...and it's empty but again through CWM I can view all the files, no biggie but it would be cool if someone knew the fix. Perhaps a few cmd commands in the terminal may fix this...anyway I'll do some research and see
I was getting this com.android.phone error at the begging when u sign up not now tho and the screen like goes black when I m writing something in the browser
I was tapping around on the screen and accidentally confirmed an error message while waiting for the splash screen to pass, but I briefly read something that contained com and media (I know that doesn't help much.)
No other error messages so far.
Everything is good so far except settings>battery doesn't show anything using it. I've only had it on the charger so far but it should still be showing something, correct me if I'm wrong.
Sent from my LG-P999 using xda premium
rasdabess said:
First
Thanks, going to try will report any bugs asap.
Click to expand...
Click to collapse
This release is pretty darn solid bud... Already spent the last 4 days trying to break anything I could... aside from a few known issues there really isn't anything buggy. ...and its only getting better from here folks!
wgrant said:
Everything is good so far except settings>battery doesn't show anything using it. I've only had it on the charger so far but it should still be showing something, correct me if I'm wrong.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
You stand corrected
Sent from my LG-P999 using xda premium
shovelhead83 said:
You stand corrected
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Wow that was helpful. Since I don't have anything under my meter (this being the only ics rom not showing something) I figured it was an issue. Has yours shown apps using battery since you installed it?
I've fixed permissions and restarted several times. If that's the only issue then oh well lol.
Sent from my LG-P999 using xda premium
oOo B0XeR oOo said:
This release is pretty darn solid bud... Already spent the last 4 days trying to break anything I could... aside from a few known issues there really isn't anything buggy. ...and its only getting better from here folks!
Click to expand...
Click to collapse
What about your SD cards? Can you see both? Do your pics show up in the gallery?
Sent from my LG-P999 using xda premium
shovelhead83 said:
What about your SD cards? Can you see both? Do your pics show up in the gallery?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Mine don't... just checked that.
OK I changed the option at the top a couple times from albums to people etc etc then back to albums. Now its good, very strange.
Sent from my LG-P999 using xda premium
wgrant said:
Everything is good so far except settings>battery doesn't show anything using it. I've only had it on the charger so far but it should still be showing something, correct me if I'm wrong.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
This DOES work... have you rebooted yet since you flashed? Give it some time to marinate...
IMPORTANT: If you updated your system to Android 4.1.2, *DO NOT* flash either _motley kernel, as they are built on 4.1.1 and contain the wrong interface to the power management chip. This will result in a bootloop at the least, and possibly much much worse
What we're doing, here, is turning your n7 into a multitasking muscle-machine, and giving it the I/O throughput to match. These instructions are for the stock ROM, but can be applied to any ROM with a little modification. Enjoy!
Do the OTA update to 4.1.1 (if you're stock and haven't, already), and then......
[KERNEL][GPL][Linaro][OC 1.6GHz][UV][GPU+][ZRAM][SIO+V(R)] 2012-08-10 motley 1.1.1
From that thread, you need:
a) the 1.1.1 kernel of your choice
b) the 1.0.5b kernel with ramdisk (if you're already running a custom ROM with init.d support, you don't need this, nor do you need to create /system/etc/init.d in a future step)
You'll also need:
a) root
b) cwm
c) busybox (absolute must, make sure your symlinks are proper)
d) some type of root-enabled text editor (I use root explorer)
e) a full featured cpu/sd management app (I use System Tuner)
BEYOND THIS POINT, THERE BE DRAGONS. I'm not responsible if you FUBAR your device, but if you follow my instructions to the letter, you won't
0.5) READ THIS ENTIRE POST BEFORE PROCEEDING
1) install cwm and root your tab (if you haven't already)
2) reboot into CWM, flash the 1.0.5b kernel with ramdisk (if you're on stock or a stock-based ROM without init.d support), then immediately flash the 1.1.1 kernel you chose (gpu overclocking is nice and all, but I haven't found a game that doesn't run perfectly with the stock GPU speed of 416MHz..Looks great on benchmarks, though)
3) reboot back into JB, fire up root explorer, remount /system rw, create a folder in /system/etc called init.d (permissions rwxr-xr-x), create a file in it called S90zRAMandSpeedTweaks (permissions rwxrwxrwx), and long-press to open it in a text editor
4) make it look like this:
Code:
#!/system/bin/sh
#remount /data for faster i/o
mount -o remount,noauto_da_alloc /data /data
#disable fsync (controversial, I've been doing it for years with no real issues)
echo 0 > /sys/class/misc/fsynccontrol/fsync_enabled
#set zRAM size (recommended sizes are 64 and 128, as this compresses an actual block of RAM. Setting it higher will likely impede performance)
echo $((1024*1024*128)) > /sys/block/zram0/disksize
#use busybox to create and activate zram0, if busybox is not in /system/xbin, modify accordingly
/system/xbin/busybox mkswap /dev/block/zram0
/system/xbin/busybox swapon /dev/block/zram0
It's important to leave at least one trailing line in scripts. Just trust me, it's a linux thing.
*NOTE* The above script does NOT check to see if it was successful, but if you copied it directly and installed busybox to /system/xbin then it will work. Once you reboot in a few minutes, you can check by using the command "busybox free" from a terminal emulator or adb shell
5) Save the file, delete the .bak now in that folder, and close root explorer.
6) Open System Tuner, tap on the SD option, change cache to 1024 and scheduler to deadline
7) Tap the Voltage option and hit -25 4 times and save the settings as voltage_table_uv
8) Tap the CPU option and tap Boot Settings. For CPU and SD, set the method to init.d
9) Close System Tuner and reboot your device.
10 Profit/consume butter
It seems like a lot, but it really only takes about 15 minutes if you're a complete rooting n00b, and the end result is a buttery-smooth multitasking powerhouse (that blows iOS *away*). The 100mV undervolt also greatly extends battery life. I haven't had ANY issues at -100mV, but if you do, just increase it by hitting +25 on the voltage tab of System Tuner until you have something that works for you (in fact, you might want to start at -25mV and slowly grow it to -100mV, playing games and checking for instablity along the way)
It's also worth mentioning that if you're currently completely stock, you will need to unlock your bootloader to root and install CWM, and unlocking the bootloader wipes your device (no way around it, unfortunately. Hook your N7 up to your computer and backup the entire contents of /storage/sdcard0 to make restoring your data as painless as possible)
farmerbb's scripts - If you're having trouble getting your scripts to stick, or just don't want to be assed with installing System Tuner, use these! There are three different packages, for 64MB, 128MB, and 256MB zRam setups. Thanks, farmerbb!!
------- Revisions as of 9/1/12 -------
Fixed first line of script so it will actually run
Fixed zRam settings, as zRam is a block of actual RAM, not written to storage
Removed JRummy busybox installer as recommended. Use whichever you like, just make sure your symlinks are good
Awesome guide. Can't wait to try this out!
Thanks for the share..
Sounds good, will try this out tomorrow.
Dont suppose anyone has a copy if 1.0.5? Removed from Motleys OP
Nvm, went on web version and it was there
Sent from my Nexus 7 using xda app-developers app
Nice to see your thread here.
Sent from my GT-I9100 using xda premium
Copied this over from the other thread to show that it works:
clankfu said:
Here's my Androbench after applying the zRAM and fsync tweaks that Jay Aristide posted on page 6. I didn't really have a problem with lag but now my N7 is absolutely flying! Only minor annoyance is that my System Tuner settings won't stick after a reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here's my Androbench before I did the tweaks for comparison:
Click to expand...
Click to collapse
I'm out of thanks for the next few hours, so here's a ^5! Glad it's working well for you
Jay Aristide said:
*NOTE* The above script does NOT check to see if it was successful, but if you copied it directly and installed busybox to /system/xbin then it will work. Once you reboot in a few minutes, you can check by using the command "busybox free" from a terminal emulator or adb shell
/QUOTE]
What should it say here if it worked? Thanks for the guide
Click to expand...
Click to collapse
ChrisJ951 said:
What should it say here if it worked? Thanks for the guide
Click to expand...
Click to collapse
For the last line, you'll see numbers next to "Swap" instead of just zeroes.
Thank you very much for gathering and presenting all that information. One question though. Does any of this impacts battery life?
sotoskawasaki said:
Thank you very much for gathering and presenting all that information. One question though. Does any of this impacts battery life?
Click to expand...
Click to collapse
The undervolting increases your battery life.
so just to make sure before attempting this mod:
im on stock 4.1.1 rooted with cwm
i need :???????
motley_nexus7_with_stock_ramdisk_v1.0.5_build_39.zip
and witch one of those??
motley_anykernel_nexus7_1.1.1_NoGPUOC_build_220.zip (GPU stock 416GHz)
motley_anykernel_nexus7_1.1.1_GPU484_build_219.zip (GPU OC 484MHz)
motley_anykernel_nexus7_1.1.1_GPU520_build_218.zip (GPU OC 520MHz)
thanx
guinnes.s said:
so just to make sure before attempting this mod:
im on stock 4.1.1 rooted with cwm
i need :???????
motley_nexus7_with_stock_ramdisk_v1.0.5_build_39.zip
and witch one of those??
motley_anykernel_nexus7_1.1.1_NoGPUOC_build_220.zip (GPU stock 416GHz)
motley_anykernel_nexus7_1.1.1_GPU484_build_219.zip (GPU OC 484MHz)
motley_anykernel_nexus7_1.1.1_GPU520_build_218.zip (GPU OC 520MHz)
thanx
Click to expand...
Click to collapse
Yes to the first one and take your pick with the second ones the only difference is the GPU overclock, stock works just fine so try that first
Sent from my CM9 TouchPad using Tapatalk 2
guinnes.s said:
so just to make sure before attempting this mod:
im on stock 4.1.1 rooted with cwm
i need :???????
motley_nexus7_with_stock_ramdisk_v1.0.5_build_39.zip
and witch one of those??
motley_anykernel_nexus7_1.1.1_NoGPUOC_build_220.zip (GPU stock 416GHz)
motley_anykernel_nexus7_1.1.1_GPU484_build_219.zip (GPU OC 484MHz)
motley_anykernel_nexus7_1.1.1_GPU520_build_218.zip (GPU OC 520MHz)
thanx
Click to expand...
Click to collapse
The middle one works best IMO, but they will all do what you seek
Sent from my Nexus 7 using xda app-developers app
BIGSimon said:
Yes to the first one and take your pick with the second ones the only difference is the GPU overclock, stock works just fine so try that first
Sent from my CM9 TouchPad using Tapatalk 2
Click to expand...
Click to collapse
done, it seems is not working i still have no numbers next to "Swap" instead of just zeroes
guinnes.s said:
done, it seems is not working i still have no numbers next to "Swap" instead of just zeroes
Click to expand...
Click to collapse
Did you run the busybox installer you downloaded from the play store and have it install busybox to /system/xbin?
From terminal emulator, type
busybox which busybox
If it says anything other than /system/xbin/busybox you'll need to modify the script accordingly
Sometime in the next couple days, I'm going to make a cwm-flashable zip that does everything.. I just need to read up on how
Jay Aristide said:
Did you run the busybox installer you downloaded from the play store and have it install busybox to /system/xbin?
From terminal emulator, type
busybox which busybox
If it says anything other than /system/xbin/busybox you'll need to modify the script accordingly
Sometime in the next couple days, I'm going to make a cwm-flashable zip that does everything.. I just need to read up on how
Click to expand...
Click to collapse
Yes is installed in the right place and typing the busybox command it gives that directory. I jus copy and paste ur code when creating the file? ?is that OK, I have the 16gb model.
guinnes.s said:
done, it seems is not working i still have no numbers next to "Swap" instead of just zeroes
Click to expand...
Click to collapse
Mind didn't work until I ran the script via Script Manager. Download the app, find that zRAM script file you created in the init.d folder, select it, choose script, press the SU & boot icon up top and press Run. You'll see it run in command and say zRAM successful. Press Back and then save it.
For some reason, System Tuner doesn't seem to want to play nice with this script - at least for me.
guinnes.s said:
Yes is installed in the right place and typing the busybox command it gives that directory. I jus copy and paste ur code when creating the file? ?is that OK, I have the 16gb model.
Click to expand...
Click to collapse
If you're doing it in notepad, that's the problem. Notepad++ works if you choose Unix encoding
I AM CURRENTLY WORKING ON A TOTAL REVAMP OF THIS TOOL, SO ANY VERSION IN OP IS A NON WORKING VERSION, BECAUSE SIMPLY THE SCRIPT REFUSES TO RUN IN RECOVERY MODE!
Disclaimer:
This mod is meant to be used in every single device that exists in the market in a worldwide basis despite providers and so on!
THIS MOD IS TO BE CONSIDERED A WIP aka Work In Progress!
Click to expand...
Click to collapse
AUTOMAGIC zInternal 2 zExternal Memory 2.2
The main purpose of this mod:
To all people out there that use our beautiful devices, there is a thing that i hate and that is: LIMITED MEMORY in our device!
Then i had the idea along with my coder and friend zeppelinrox to make a UNIVERSAL memory switcher and along with it being able to use the microSDXC cards of 64Gb as INTERNAL MEMORY!
Click to expand...
Click to collapse
What does this MOD do after all?
This mod switches the internal memory of your device with the external SDCard, and when your rom boots Android will "think" that your external SDCard is actually the internal memory and will use it to install data and so on!
Click to expand...
Click to collapse
Screenshots of this MOD working:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
2.2:(non-funcional):
zExternal2InternalCard_zwitcher_2.2_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.2_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.2_CWM-signed.zip
Click to expand...
Click to collapse
2.0(non-funcional):
zExternal2InternalCard_zwitcher_2.0_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.0_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.0_CWM-signed.zip
2.1(non-funcional):
zExternal2InternalCard_zwitcher_2.1_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.1_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.1_CWM-signed.zip
Click to expand...
Click to collapse
This MOD it was tested in several devices as follows:
Samsung Galaxy S
Samsung Galaxy S2 (all brands)
Samsung Galaxy S3 (all brands)
Samsung Galaxy Note (all brands)
Samsung Galaxy Note II (all brands)
Samsung Galaxy Note 10.1
Samsung Galaxy Tab
Samsung Tab 2
Samsung Tab 10.1
Micromax A110
Sony Xperia Sola
Sony Xperia T
HTC Amaze 4G
Sony Xperia Go
Sony Xperia Miro
and many more that i don't remember right now!
it should be compatible with every device that exists in the market!
Click to expand...
Click to collapse
The base of this MOD came from an already posted mod which was considered to be NOT N00B FRIENDLY:
http://forum.xda-developers.com/showthread.php?t=1991583
FAQ's
Changelog's
ToDo's and improvements!
Credits:
zeppelinrox for being my coder and my sidekick! :highfive:
droidiser for the initial idea that he gave me and for the images!
And thanks to all community that helped me to learn how to make stuff by my own :victory:
FAQ:
1) Whoaaaaa my device is not supported because i get an error when i try to flash the mod via recovery... what now?
Go to: /system/etc and post your vold.fstab and we will make it work with your device!
2) Cool it works but i wanted to change it back to it's original form... how can i do so?
Just flash the zip again and it will reverse the changes!
Changelog:
1.0 alpha:
New: Initial idea for the script and i wrote a very simple script, but didn't do what i intended!
1.1 alpha
Fixed: Script was searching for the file in the wrong folder, without the right permissions!
Fixed: Permissions fixed and now searches for the right file in the right directory!
1.4 alpha
Fixed: Permissions (again lol)
New: Added error if script finds a non working file that can be modded!
1.6 beta
Fixed: Script works but was changing the mounting points to the wrong point of volume mounter inside Android
2.0 stable release!
New: Added feature to detect non working volume mounter in a non working device!
Fixed: Detected right mounting and if there are spaces or wrong lines only the right ones are detected and properly edited now!
2.1 stable
New: Capability of creating a binary on init.d so a developer can include this script in a ROM!
New: The script does now create a backup of the original vold.fstab!
New: Capability of in case of existence of backup, it restores to the original vold.fstab that comes with the ROM that you are using!
New: The script on init.d checks if the MOD was installed already and in case it was it won't change all the time you reboot your device, so the change is only done once you flash the zip
New: Possibility of running this MOD thru terminal with: su -c zwitcher
Fix: Typo in installation script where it was supposed to say 2.0 and it said 1.0 (ups)
2.2:
Major fix: Permissions correctly implemented in recovery to run the script!
To Do List:
Currently nothing but i will add new features because i have many changes in mind!
Ah... I was gonna say "FIRST!"
But I'll settle for...
FIFTH!
lol
Of course I'll be available for increasing compatibilty... because there is always stuff changing
Oh yeah, if users have a vold.conf file as well it may not work "as is".
In that case they should post both vold.fstab and vold.conf
Well i have edited the first topic to be a little bit more interesting and i hope people find it useful
Thanks a lot my friend :good:
Version 2.1 is OUT with many addictions and a little fix for a typo!
Changelog:
2.1 stable
New: Capability of creating a binary on init.d so a developer can include this script in a ROM!
New: The script does now create a backup of the original vold.fstab!
New: Capability of in case of existence of backup, it restores to the original vold.fstab that comes with the ROM that you are using!
New: The script on init.d checks if the MOD was installed already and in case it was it won't change all the time you reboot your device, so the change is only done once you flash the zip
New: Possibility of running this MOD thru terminal with: su -c zwitcher
Fix: Typo in installation script where it was supposed to say 2.0 and it said 1.0 (ups)
Well so far i tried to flash today the MOD that we were creating and came to the conclusion:
Lack of permissions to run the script thru recovery! (major UPS )
And i didn't made the correct command to run the script without errors!
Don't try to flash 2.1 and neither 2.0 because both builds are broken due to a lack of permissions to run the script in recovery!
Will fix ASAP! :good:
Errors happen and since we are humans and we make mistakes here is 2.2 release!
Changelog for 2.2:
Major fix: Permissions correctly implemented in recovery to run the script!
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.1]
I fashed u r mod on my neo v
No change after rebooting help needed
And I don't hve internal sd I only hve
Internel mem and external sd card
Sent from my MT11i using xda premium
praveenpgeb said:
I fashed u r mod on my neo v
No change after rebooting help needed
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Don't flash 2.2 because it's still broken!
A NEW VERSION IS BEING WORKED ON! :laugh:
Zep i've come to a conclusion and now i need your help because i need two things:
First of all i have discovered why the script was refused to run in recovery:
Not an edify script (DUH) so it needed to be run like this:
Code:
run_program("/sbin/busybox", "sh", "/tmp/mod_vold.fstab.sh");
But i need you to do two things for me that will be:
Making the main script to edit ONLY the vold.fstab
And the binary that goes on xbin and the init need to be different files, cannot be created from recovery!
So:
Script to edit vold.fstab with a temporary directory for example: /tmp_vold/
the binary already compiled to run from xbin
and init.d script!
Can you do it my good friend?
:good::highfive:
Before doing anything drastic, test with a blank line at the end of the script
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
zeppelinrox said:
Before doing anything drastic, test with a blank line at the end of the script
Click to expand...
Click to collapse
Will do
Sent from my GT-N7000 using Tapatalk 2
No changes on recovery :S
Can you do what i told you? Just edit the vold.fstab and the binary is a different file?
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
I have a Doubt. if the SD card becomes the internal storage then where will we store music and other stuff?
karan128 said:
I have a Doubt. if the SD card becomes the internal storage then where will we store music and other stuff?
Click to expand...
Click to collapse
Wherever you want?
This is just the memory for storage, doesn't affect the internal partitions!
I mean for example:
For Galaxy Note /system is and always will be: mmcblk0p9
And so on!
It only edits the mounter to switch the mounting of the partition of storage between: /sdcard and /external_sd
So when you access inside Android to a file manager
/external_sd is actually phisically speaking your internal memory (device memory)
And /sdcard is the SDCard (your microSD card)
got it?
It's just to improve the space to store the data for huge games like gameloft games
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
Does it really work on neo v
Sent from my MT11i using xda premium
praveenpgeb said:
Does it really work on neo v
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Running thru script manager yes, but currently we were trying to make it run in recovery mode to spare the user two reboots!
But tomorrow i will post a new version (ALL THE VERSIONS included in OP are BROKEN so flashing won't do nothing to your phone lol)
I will post a new version that is to be flashed via script manager with root and it will install a binary and in case you wanna undo or include this in your own rom all you have to do is pickup zwitch from /system/xbin and give it the proper permissions!
For now this script is useless LOL
Tomorrow i will post a totally revamped version because only using recovery for now it's impossible since i am currently working on it!
:good:
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
if I have 16gb SD card then will I get all of the 16gb as internal space?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mounts2SD - Storage & Memory Management
Mounts2SD started out as a simple sd-ext script which only difference between it an others like it, was that it did not use symlinks to create links between /data and /sd-ext. To day it has grown to be so much more. It now comes packed with an Application for controlling the script, viewing current states and more. The script itself has grown to become a large storage and management script with features that controlls SWAP, ZRAM, mount optimization, storage thresholds, different external and internal MMC configurations, cache and more. The content management is able to move a lot more different content between /data and /sd-ext, including the new internal storage, which on some devices, is placed in /data/media, and it also contains more than one option for storing system content on both /data and /sd-ext.
Mounts2SD is no longer just a script for devices with low storage capabilities. It can be used for a lot of things and is useful on almost any device, even those without external sdcard.
Links
The Source -> Go There
Documentation and Important Information -> Go There
Supported Languages
English
Danish
French (By @PerfectSlayer)
Dutch (By @Skippernl)
Portuguese (By @_MarcoMarinho_)
Italian (By @GMagician)
Hungarian (By @@steveboy25)
Upcoming Features
Since DevDB has future requests capabilities, I will keep a list here of planned/deciding features to avoid repeating requests.
Application Manager with fallowing options:
Convert/Revert regular applications to/from system applications
Status: Done
View and Clear Application Caches
Status: Pending
Manually kill the application
Status: Deciding (does not fit the Storage and Memory management category)
Downloads
Google Play
Install directly from Play Store
===========================
3.4.8 (6.0.20) APK (Nov 01, 2013)
[Default Mirror] SourceForge.net
This is the Application which can be installed directly on the phone
-------------------------------------------------
3.4.8 (6.0.20) Recovery ZIP (Nov 01, 2013)
[Default Mirror] SourceForge.net
This is the Recovery Package for when updating the ROM on an M2SD configured device
Older Downloads
2.2.0 (5.5.0) APK (Jan 26, 2013) (MD5: dd54ace01d9b17c72081a06cd1d072c7)
[Default Mirror] SourceForge.net
[Default Mirror] MediaFire.com
This is the Application which can be installed directly on the phone
-------------------------------------------------
2.2.0 (5.5.0) Ext4 ZIP (Jan 26, 2013) (MD5: 80c218ff53009c8a0ccde1927361def2)
[Default Mirror] SourceForge.net
[Default Mirror] MediaFire.com
This will provide you with an recovery ZIP for newer Ext4 devices
Does not have the file /proc/mtd
-------------------------------------------------
2.2.0 (5.5.0) MTD ZIP (Jan 26, 2013) (MD5: 4762d7d85c9cd934f97ba3ba36294fdd)
[Default Mirror] SourceForge.net
[Default Mirror] MediaFire.com
This will provide you with an recovery ZIP for older MTD devices
Will have the file /proc/mtd
Change Log
Version: 3.4.8
Added Hungarian translation by @steveboy25
Preferences: Fix nullPointerException issue
Upstart Script: Fix boot issues on a few devices
Older Change Log
Version: 3.4.6
Update RootFW
Script/App: Add busybox fail-safe
Tab Controller: Do not crash on IllegalStateException
Update Italian messages translation by @GMagician
Version: 3.4.4
Startup Script: Try default busybox as fallback if the runner selected one fails
Preferences: Fix another reported crash while loading configurations
EventHandler: Fix reported crash
Preferences: Fix reported crash while loading configurations
Fix internal busybox being restored on boot even thought it was removed
Upstart Script: Only unmount pre-mounted sd-ext if not on /data
Update Italian messages translation by @GMagician
Version: 3.4.2
Fix bug when sd-ext is not mounted
Fix typo which breaks IMMC configs on MTD devices
Fix reported nullPointerException crashes
RootFW: Fix nullPointerException crash on extensive loading
RootFW: Do not try to destroy a null property
Version: 3.4.1
Major rewrite
Complete rewrite of the entire application
Updated RootFW (Library)
Updated TaskManager (Library)
Added Debug File builder to the log tab
Added separate configure option for converted system applications
Minor typo fix in default locale by @GMagician
Italian translation updated to 3.3.2 by @GMagician
Version: 3.3.4
Fix sqlite3 installer to avoid boot loops
Replaced the binary and removed replacment of the libraries (They are kernel specific)
Handle old reversed mount from within the application
Is also handled by the script, but in case someone changes the configurations before rebooting after upgrading from the 2.x app, we need to have this handled before that
Version: 3.3.2
Fix reported crashes
Version: 3.3.0
Settings: Fix a few small bugs
Translated V3.2.0 new messages+some improvements by @GMagician
Add new App Manager
Used to convert apps into system apps and revert them back. No apps are moved to /system, but instead moved between /data/app and /data/app-system
Note that this feature is a paid feature. The downloads at XDA are unlocked, but installs and updates from Play Store is not
Settings: Add fallback installs for S-On devices
Uses the recovery as a fallback installer for the script and sqlite in case of HTC S-On protection
RootFW: Rebuild Instance Extender
Fixes a small issue where the shell was not always connected after boot on the first app launch
Version: 3.2.0
Add Italian translation by @GMagician
Preferences: Avoid using RootFW.Filesystem.statFstab if possible
RootFW.Filesystem.statMount is faster
Upstart Script: Fix a few shell bugs in environment setup
Possible boot loop cause
Settings: Cleanup script installer
Should fix the issue with the script not always getting installed
Settings: Add SQLite3 installer
New feature to install and/or fix the SQLite3 binary
RootFW: Do not use goldfish files on non-emulator devices
Avoid having wrong partitions located and recovery cleaned
Version: 3.1.8
Add Portuguese translation by @_MarcoMarinho_
Allow translating tab names for tablet layout
In tablet layout, there is text displayed for each tab. This should also be translated
Update English language file
Small corrections
Add missing tablet layout tab names strings
Add Danish translation
Settings: Allow translating upstart script info
Also display words like 'Versions', 'Bundled' and 'Installed' in Application Settings
Upstart Script: Fix not detecting folder suppport
Fix issue where the Application alerts about some Data folders not being moved
RootFW: Fix nullPointerException when no SWAPS are active
Issue where the Application would crash if no SWAP or ZRAM device was activated
RootFW: Fix hanging issues with Kutch SuperUser Daemon mode for Android 4.3
Bug in the SuperUser Daemon which would make some Shell types hang randomly
Version: 3.1.4
Added Dutch translation by @Skippernl
Upstart Script: Handle empty values better
Reset properties if their values are empty
Better log entry structure to better detect empty property values
RootFW: Fix write() not working
Bug in the write() method was causing empty values to be written to the property files
RootFW: Fix ArrayIndexOutOfBoundsException issue
Would sometimes cause a crash when getting stats on none existing directories
Version: 3.1.2
Update french locale and fix default one by @PerfectSlayer
Use the correct strings in the infobox
Display a log announcment instead of safe-mode information when there are warnings/errors in the log
RootFW - Fix java divide by zero Exception
Was causing crash when calculating usage percentage on partitions with 0 bytes used
Make better compatibility between different devices and ROM's
Revert Busybox binary
Create a more controlled environment to have the script executed in
Better variable export feature
Change temp dir /tmp ~> /mounts2sd-tmp
To fix issues where a ROM clears /tmp after boot
Generate more logging to help debug issues
Now generates both the regular /mounts2sd-tmp/log.txt and /data/local/mounts2sd.log which is not deleted on device shutdown
Click to expand...
Click to collapse
XDA:DevDB Information
Mounts2SD, a App for the No Device
Contributors
dk_zero-cool, PerfectSlayer, Skippernl, _MarcoMarinho_, GMagician
Version Information
Status: Stable
Current Stable Version: 3.4.8
Stable Release Date: 2013-11-01
Created 2013-09-04
Last Updated 2013-11-01
Reserved
Good job. And by the way u made small mistake. Stable version should be 3.1.8
Sent from my HTC Explorer A310e using Tapatalk 4
@rcane said:
Good job. And by the way u made small mistake. Stable version should be 3.1.8
Click to expand...
Click to collapse
Thanks, it has been corrected
When i try to install the script. Error popup that it failed to move 10mounts2sd.sh to system/etc/.
using galaxy note, jelly bean 4.1.3
jasonkhoo87 said:
When i try to install the script. Error popup that it failed to move 10mounts2sd.sh to system/etc/.
using galaxy note, jelly bean 4.1.3
Click to expand...
Click to collapse
Same problem here.
jasonkhoo87 said:
When i try to install the script. Error popup that it failed to move 10mounts2sd.sh to system/etc/.
using galaxy note, jelly bean 4.1.3
Click to expand...
Click to collapse
Okay, could you instead post this as an issue (top pane)?
Sent from my GT-I9300 using XDA Premium 4 mobile app
Says I need busybox and int. I should also say rooted sgh-i137 running skyrom 9.3
Sent from my SAMSUNG-SGH-I317 using Xparent Cyan Tapatalk 2
hmmmm....can't use this app on my Xperia Mini Pro (Carbon Rom v4.2.2)....i manage to install the scripts and after change a few in setup i reboot the phone then BAMMMMMMMM.....stuck on bootlogo....
iPusak Gaoq™ said:
hmmmm....can't use this app on my Xperia Mini Pro (Carbon Rom v4.2.2)....i manage to install the scripts and after change a few in setup i reboot the phone then BAMMMMMMMM.....stuck on bootlogo....
Click to expand...
Click to collapse
And I will gladly help you with this problem, but please use the Bug Report feature at the top of the Thread. It makes it much easier to keep track of current reports. Also, can you add a logcat entry of this issue as well?
dk_zero-cool said:
And I will gladly help you with this problem, but please use the Bug Report feature at the top of the Thread. It makes it much easier to keep track of current reports. Also, can you add a logcat entry of this issue as well?
Click to expand...
Click to collapse
Hope you have a copy of that paragraph so that can just paste.. probably need to use it often.
Sent from my OptimusBlack using xda app-developers app
Is it compatible with link2sd?
I'd like to move swap and cache on the second partition.
There's a separate q&a thread...just in case you weren't aware....
http://forum.xda-developers.com/showthread.php?t=1342387
romualdrichard said:
Is it compatible with link2sd?
I'd like to move swap and cache on the second partition.
Click to expand...
Click to collapse
Of cause not. Link2SD is not compatible with Mounts2SD or vise versa. You can't have two sd-ext scripts doing the same things and expect it to work.
using 4ext recovery and have sd-ext set up on sd card. rom boots fine. and i have the latest version of mounts2sd installed, under app settings i have the start up script installed, have green ck dot for applications, but still get insufficent avl, im very green when it comes to apps2sd and mounts2sd, the guides are not too helpful. any help here would be great. thx. jake
jaxenroth said:
using 4ext recovery and have sd-ext set up on sd card. rom boots fine. and i have the latest version of mounts2sd installed, under app settings i have the start up script installed, have green ck dot for applications, but still get insufficent avl, im very green when it comes to apps2sd and mounts2sd, the guides are not too helpful. any help here would be great. thx. jake
Click to expand...
Click to collapse
What does the size information say about your partitions? You can see this in the app. If cache or data is using to much space, it does not help much to have moved the APK's. And also, what about the Threshold, is that displaying more than what is left on data?
If dont check options that move data from /data/data into/sd ext/data/ whether to open the app to be faster?.
My memory card is 4gb class 4.
dejanxxxx said:
If dont check options that move data from /data/data into/sd ext/data/ whether to open the app to be faster?.
My memory card is 4gb class 4.
Click to expand...
Click to collapse
It all depends on the sdcard whether it slows down or not. I have a 16GB Kingston class4, and this card has faster read and write speed than the internal nand on the SGS3, so I actually gain speed by moving content to sd-ext.
The best cards when using sd-ext, is Kingston, Samsung and ScanDisk. The best class value is 2, 4 and 6 (High values is not good when using sd-ext). The worst is class10 (Don't know why). Also, lower readahead is mostly a good thing, but not if you do a lot of PC~>Phone transfers. So if you don't copy much from PC to Phone, I would lower it to 128KB.
Also, you could always try. If you think that your phone get's slower by moving /data/data, then you can just move it back.
dk_zero-cool said:
Kingston class4, so I actually gain speed by moving content to sd-ext.
The best cards when using sd-ext, is Kingston, Samsung and ScanDisk. The best class value is 2, 4 and 6 (High values is not good when using sd-ext). The worst is class10 (Don't know why). Also, lower readahead is mostly a good thing, but not if you do a lot of PC~>Phone transfers. So if you don't copy much from PC to Phone, I would lower it to 128KB.
Also, you could always try. If you think that your phone get's slower by moving /data/data, then you can just move it back.
Click to expand...
Click to collapse
Thanks, my card is Kingston, mean you say that be better that put lower readahead, on me when look on script for readahead is default 512kb, did leave thus?. Some say that be better that be a 2048kb readahead.
For copy from PC to phone, use air droid, I copy litlle much from PC to phone and conversely, and now how would you put in for readahead?
Ok, I do like you say for readahead,and leave on 512kb, it is deafult read.
Now I leave data/ data, on my internal memory,and only 47mb use.I have small internal memory 158mb free wheb flas ROM. On default is 512mb RAM.
dejanxxxx said:
Thanks, my card is Kingston, mean you say that be better that put lower readahead, on me when look on script for readahead is default 512kb, did leave thus?. Some say that be better that be a 2048kb readahead.
For copy from PC to phone, use air droid, I copy litlle much from PC to phone and conversely, and now how would you put in for readahead?
Ok, I do like you say for readahead,and leave on 512kb, it is deafult read.
Now I leave data/ data, on my internal memory,and only 47mb use.I have small internal memory 158mb free wheb flas ROM. On default is 512mb RAM.
Click to expand...
Click to collapse
Many people think that higher number means better performance, but they never take into account the scenarios. Large readahead is great for large file transfers and small readahead is good for many small reads and writes. So if you often copy multiple gb of music, movies etc to your phone, then yes, a large readahead would be better. If the system is constantly writing small amounts of data to the drive, then smaller readahead is better. The best would properly be around 4kb, but since you also use the first partition as a storage device, it is best to find a middle (Around 128kb, 256kb or 512kb depending of how much transfers you make).
It's like people who thinks that a large CPU is better in their computer, without thinking about whether or not their old HDD can actually keep up with that speed. Grater number does not mean better. A perfect balance is what you should go for.
EDIFY CODE FOR ANDROID KITCHEN WITH CORRECT MOUNTING POINTS
So this is our newly created (by me) edify code file specific for our device...
Tested on Raw firmware and now the updater script has correct mounting points...:fingers-crossed::fingers-crossed:
Replace this file in cygwin/home/kitchen/tools/edify_defs folder
File name is delos3geur which has all mounting points and system path and file system formats...specific for our device
If you dont have this file in that directery to replace then just add it to the folder
Now cook roms (anybody) with this in their kitchen..modify and add scripts, theme etc...
http://www.4shared.com/file/VjtKxCcl/delos3geur.html
INIT.D FOLDER SUPPORT
OK GUYS here i present you the method to install init.d folder support without a custom kernel so that we can use any scripts or app2sd etc...
IT WORKED AND TESTED IN MY DEVICE :highfive::highfive::highfive:
Requirements:
#1 You must be rooted
#2 You must have busybox intalled
#3 ADB driver installed in your pc
Procedure to install:
- Download 'Busy Box" and install from playstore {select /system/xbin/
- Download attached 'DOC_INIT.D.zip' file and extract it to your pc {in to C:/} {dont extract in any folder}
- Now run 'runme.bat' file
- Grant permission in phone to ADB Shell then rest it will do by default {Dont Do Anything Else}
- your phone will show the process on screen
After installation complete terminal shows 'All Done' press any key to continue
Check for init.d folder in Root/etc/init.d
How to confirm its working?
Reboot after install
Check u will see root/data/local/temp/init.d_log_text.txt
Open the file in text viewer it will show 'done'
Now you successsfully installed init.d folder
Now its time to test all the scripts available in XDA...
Finally you guys also check the scripts....download Script manager app - put the script file in that init.d folder - select the script through smanager
Screen shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installing busybox
Showing init.d folder in place
Confirmation that it's installed correctly
Confirmation that it's working
Please press thanks button if i helped u
Scripts All are Working for Quattro
| SCRIPT | Supremacy Trilogy
Trilogy Features::
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
HOW TO:
Install:
1. Boot into CWM
2. Wipe dalvik cache
3. Flash zip
4. Reboot
Uninstall:
Didn't work out for you? lag? Freezing?
Flash the uninstaller in the attachments.
Thanks:
EMWNO for this script
Adrenaline™ Boost
Description
This script act like an nitro boost for your Android.
It helps you to clear your system cache, get more free ram for you and gravely boost your phone's performance !
*Best use before gaming !
How it works?
Your phone's ram usage will get higher and higher everyday then you will find your ace become an @SS because it's turtle speed and only reboot fix this problem.
Our android os create system cache everyday, but after one day or so, those old caches are not longer in use but the os continuously create newer cache that's why the ram get heavier and heavier everyday !
Adrenaline Boost help you to clear those caches ! So you won't have to reboot again !
For those who have sharp eyes may find your battery life decreased. WHY?
Adrenaline Boost clear your system cache and your cpu will work harder to build back needed cache.
Some have reported to me that the Opera browser crash after boost when open over 3 tabs.
You system need caches to work , this boost is intended to clear old cache that are no longer using and let the system to build new cache, so if u boost it too often , your cpu will be very busy building needed caches and may consume more battery than normal !
Boost it only when it's needed then there will be no problem !
How To Install ?
1) Download from the attachment below
2) Put into your sdcard
3) Reboot into CWM
4) Mounts /system
5) Flash it
6) Reboot
How to Use It?
1) Open terminal emulator
2) Type :su [hit enter]
:boost [hit enter]
How to uninstall adrenaline boost
just flash uninstaller
Thanks:
IMBAWIND for adrenaline boost script
Note:
Dont use bothe scripts simultaneously please uninstalling the script before u try another one
[SOLUTION] No lockscreen and No power option
Guys most of us encountered a similar problem like this - for no reason the lockscreen and power option menu wont work
sometimes you will get red warning like 'factory mode is on' some features wont work properly
Guys it's because of Corrupted EFS folder
So here is the exact solution to get rid of factory mode into user mode [get back your lockscreen and power option menu]
Its a proven method
You have to root your phone and install Terminal Emulator from Google Play.
Open terminal emulator and type as ;
su
rm /efs/FactoryApp/keystr
rm /efs/FactoryApp/factorymode
echo -n ON >> /efs/FactoryApp/keystr
echo -n ON >> /efs/FactoryApp/factorymode
chown 1000.1000 /efs/FactoryApp/keystr
chown 1000.1000 /efs/FactoryApp/factorymode
chmod 0744 /efs/FactoryApp/keystr
chmod 0744 /efs/FactoryApp/factorymode
reboot
You now should not see the that message anymore. Its because of an EFS corruption.
Hope it helps!!!
Time to enjoy 'hurray' i got my lockscreen and power option menu :fingers-crossed::fingers-crossed::fingers-crossed:
Memory Swap Method
External to Internal Memory Swap method :victory::victory::victory:
please follow the steps carefully :laugh::laugh::laugh:
- Download and install the app that i attached here
- open the app and grant permission
- pop up message will appear press'I dont care'
- go to settings:
1.check 'send rescan'
2. check 'Use per default'
- press original mounting point and change as 'sdcard0'
- press Ext.sdcard device Access and change the value from 179:49 to 179:33 its our device access value
- press back button and come to main screen
- check 'At Boot' box
- Now press External>Internal*
- wait till u get a small fraction popup message like 'Android sdcard permission granted' something like this
- Now go to storage option in settings there u will see your ext sdcard is swaped as internal sdcard
- Reboot device to work properly
Guys it works only on JB 4.1.2 and if you dont like to swap just uninstall app and reboot
Use Class 6 or Class 10 Sdcards...I prefer Class 10 :angel::angel::angel:
Dont worry all your apps data will be swaped to ext sdcard so apps will work normally
I swaped my 8gb sdcard as internal memory:
If u use 16gb - internal will be 16gb
If u use 32gb - internal will be 32gb
Screenshots:
Guys solution for No lockscreen and No power option updated in the thread
Thx doc for the gud work but I have not tested yet
Sent from my GT-I8552 using xda app-developers app
Guys on behalf of our device I sent a form to xda owners requesting for a forum for us and also told that we have been shouting since so many months...I think it will work and waiting for reply.
We have positive signs now to get separate forum.
Sent from my GT-I8552 using Tapatalk 2
Sent from my GT-I8552 using Tapatalk 2
Guys wat ever doubt u have please discuss here in the thread so that this thread will become popular to all and we will have more people to see so don't PM me for doubts and I'll help here rather....
Sent from my GT-I8552 using Tapatalk 2
thanks buddy
thanks bro yesterday i tried ur method of Supremacy Trilogy ,feels good battery back and increased performance. .
Thanks for reporting tony....check this thread it will be updated regularly
Sent from my GT-I8552 using Tapatalk 2
thanks rahul and tony for feedback...its a very good script those who need to increase their phone performance, battery backup and to improve game performance in stock rom
try adrenaline boost when u play games...its totally awesome with 'Zero' lag..
try it guys everybody
Thanks ash for trying and feedback
Sent from my GT-I8552 using Tapatalk 2
Guys updating memory swap (working) method for our device...
With screenshots
Sent from my GT-I8552 using Tapatalk 2
Guys thread updated with memory swap methods have a try those who want to increase thier internal memory :victory::fingers-crossed:
Doc seperated threads will.increase the popularity
Sent from my GT-I8552 using XDA Premium 4 mobile app
rahulsnair said:
Doc seperated threads will.increase the popularity
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok I'll separate it
Sent from my GT-I8552 using Tapatalk 2
Doc busy wood xams till 10 th later a new rom for u guys and aim tryn yr script
Sent from my GT-I8552 using xda premium
Rohit Shrothrium said:
Doc busy wood xams till 10 th later a new rom for u guys and aim tryn yr script
Sent from my GT-I8552 using xda premium
Click to expand...
Click to collapse
Try it rohit it will really boost your phone battery and cpu..
Sent from my GT-I8552 using Tapatalk 2
Doc any costume kernels
Sent from my GT-I8552 using xda premium
No not yet rohit
Sent from my GT-I8552 using Tapatalk now Free