EDIFY CODE FOR ANDROID KITCHEN WITH CORRECT MOUNTING POINTS
So this is our newly created (by me) edify code file specific for our device...
Tested on Raw firmware and now the updater script has correct mounting points...:fingers-crossed::fingers-crossed:
Replace this file in cygwin/home/kitchen/tools/edify_defs folder
File name is delos3geur which has all mounting points and system path and file system formats...specific for our device
If you dont have this file in that directery to replace then just add it to the folder
Now cook roms (anybody) with this in their kitchen..modify and add scripts, theme etc...
http://www.4shared.com/file/VjtKxCcl/delos3geur.html
INIT.D FOLDER SUPPORT
OK GUYS here i present you the method to install init.d folder support without a custom kernel so that we can use any scripts or app2sd etc...
IT WORKED AND TESTED IN MY DEVICE :highfive::highfive::highfive:
Requirements:
#1 You must be rooted
#2 You must have busybox intalled
#3 ADB driver installed in your pc
Procedure to install:
- Download 'Busy Box" and install from playstore {select /system/xbin/
- Download attached 'DOC_INIT.D.zip' file and extract it to your pc {in to C:/} {dont extract in any folder}
- Now run 'runme.bat' file
- Grant permission in phone to ADB Shell then rest it will do by default {Dont Do Anything Else}
- your phone will show the process on screen
After installation complete terminal shows 'All Done' press any key to continue
Check for init.d folder in Root/etc/init.d
How to confirm its working?
Reboot after install
Check u will see root/data/local/temp/init.d_log_text.txt
Open the file in text viewer it will show 'done'
Now you successsfully installed init.d folder
Now its time to test all the scripts available in XDA...
Finally you guys also check the scripts....download Script manager app - put the script file in that init.d folder - select the script through smanager
Screen shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installing busybox
Showing init.d folder in place
Confirmation that it's installed correctly
Confirmation that it's working
Please press thanks button if i helped u
Scripts All are Working for Quattro
| SCRIPT | Supremacy Trilogy
Trilogy Features::
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
HOW TO:
Install:
1. Boot into CWM
2. Wipe dalvik cache
3. Flash zip
4. Reboot
Uninstall:
Didn't work out for you? lag? Freezing?
Flash the uninstaller in the attachments.
Thanks:
EMWNO for this script
Adrenaline™ Boost
Description
This script act like an nitro boost for your Android.
It helps you to clear your system cache, get more free ram for you and gravely boost your phone's performance !
*Best use before gaming !
How it works?
Your phone's ram usage will get higher and higher everyday then you will find your ace become an @SS because it's turtle speed and only reboot fix this problem.
Our android os create system cache everyday, but after one day or so, those old caches are not longer in use but the os continuously create newer cache that's why the ram get heavier and heavier everyday !
Adrenaline Boost help you to clear those caches ! So you won't have to reboot again !
For those who have sharp eyes may find your battery life decreased. WHY?
Adrenaline Boost clear your system cache and your cpu will work harder to build back needed cache.
Some have reported to me that the Opera browser crash after boost when open over 3 tabs.
You system need caches to work , this boost is intended to clear old cache that are no longer using and let the system to build new cache, so if u boost it too often , your cpu will be very busy building needed caches and may consume more battery than normal !
Boost it only when it's needed then there will be no problem !
How To Install ?
1) Download from the attachment below
2) Put into your sdcard
3) Reboot into CWM
4) Mounts /system
5) Flash it
6) Reboot
How to Use It?
1) Open terminal emulator
2) Type :su [hit enter]
:boost [hit enter]
How to uninstall adrenaline boost
just flash uninstaller
Thanks:
IMBAWIND for adrenaline boost script
Note:
Dont use bothe scripts simultaneously please uninstalling the script before u try another one
[SOLUTION] No lockscreen and No power option
Guys most of us encountered a similar problem like this - for no reason the lockscreen and power option menu wont work
sometimes you will get red warning like 'factory mode is on' some features wont work properly
Guys it's because of Corrupted EFS folder
So here is the exact solution to get rid of factory mode into user mode [get back your lockscreen and power option menu]
Its a proven method
You have to root your phone and install Terminal Emulator from Google Play.
Open terminal emulator and type as ;
su
rm /efs/FactoryApp/keystr
rm /efs/FactoryApp/factorymode
echo -n ON >> /efs/FactoryApp/keystr
echo -n ON >> /efs/FactoryApp/factorymode
chown 1000.1000 /efs/FactoryApp/keystr
chown 1000.1000 /efs/FactoryApp/factorymode
chmod 0744 /efs/FactoryApp/keystr
chmod 0744 /efs/FactoryApp/factorymode
reboot
You now should not see the that message anymore. Its because of an EFS corruption.
Hope it helps!!!
Time to enjoy 'hurray' i got my lockscreen and power option menu :fingers-crossed::fingers-crossed::fingers-crossed:
Memory Swap Method
External to Internal Memory Swap method :victory::victory::victory:
please follow the steps carefully :laugh::laugh::laugh:
- Download and install the app that i attached here
- open the app and grant permission
- pop up message will appear press'I dont care'
- go to settings:
1.check 'send rescan'
2. check 'Use per default'
- press original mounting point and change as 'sdcard0'
- press Ext.sdcard device Access and change the value from 179:49 to 179:33 its our device access value
- press back button and come to main screen
- check 'At Boot' box
- Now press External>Internal*
- wait till u get a small fraction popup message like 'Android sdcard permission granted' something like this
- Now go to storage option in settings there u will see your ext sdcard is swaped as internal sdcard
- Reboot device to work properly
Guys it works only on JB 4.1.2 and if you dont like to swap just uninstall app and reboot
Use Class 6 or Class 10 Sdcards...I prefer Class 10 :angel::angel::angel:
Dont worry all your apps data will be swaped to ext sdcard so apps will work normally
I swaped my 8gb sdcard as internal memory:
If u use 16gb - internal will be 16gb
If u use 32gb - internal will be 32gb
Screenshots:
Guys solution for No lockscreen and No power option updated in the thread
Thx doc for the gud work but I have not tested yet
Sent from my GT-I8552 using xda app-developers app
Guys on behalf of our device I sent a form to xda owners requesting for a forum for us and also told that we have been shouting since so many months...I think it will work and waiting for reply.
We have positive signs now to get separate forum.
Sent from my GT-I8552 using Tapatalk 2
Sent from my GT-I8552 using Tapatalk 2
Guys wat ever doubt u have please discuss here in the thread so that this thread will become popular to all and we will have more people to see so don't PM me for doubts and I'll help here rather....
Sent from my GT-I8552 using Tapatalk 2
thanks buddy
thanks bro yesterday i tried ur method of Supremacy Trilogy ,feels good battery back and increased performance. .
Thanks for reporting tony....check this thread it will be updated regularly
Sent from my GT-I8552 using Tapatalk 2
thanks rahul and tony for feedback...its a very good script those who need to increase their phone performance, battery backup and to improve game performance in stock rom
try adrenaline boost when u play games...its totally awesome with 'Zero' lag..
try it guys everybody
Thanks ash for trying and feedback
Sent from my GT-I8552 using Tapatalk 2
Guys updating memory swap (working) method for our device...
With screenshots
Sent from my GT-I8552 using Tapatalk 2
Guys thread updated with memory swap methods have a try those who want to increase thier internal memory :victory::fingers-crossed:
Doc seperated threads will.increase the popularity
Sent from my GT-I8552 using XDA Premium 4 mobile app
rahulsnair said:
Doc seperated threads will.increase the popularity
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok I'll separate it
Sent from my GT-I8552 using Tapatalk 2
Doc busy wood xams till 10 th later a new rom for u guys and aim tryn yr script
Sent from my GT-I8552 using xda premium
Rohit Shrothrium said:
Doc busy wood xams till 10 th later a new rom for u guys and aim tryn yr script
Sent from my GT-I8552 using xda premium
Click to expand...
Click to collapse
Try it rohit it will really boost your phone battery and cpu..
Sent from my GT-I8552 using Tapatalk 2
Doc any costume kernels
Sent from my GT-I8552 using xda premium
No not yet rohit
Sent from my GT-I8552 using Tapatalk now Free
Related
IMPORTANT: If you updated your system to Android 4.1.2, *DO NOT* flash either _motley kernel, as they are built on 4.1.1 and contain the wrong interface to the power management chip. This will result in a bootloop at the least, and possibly much much worse
What we're doing, here, is turning your n7 into a multitasking muscle-machine, and giving it the I/O throughput to match. These instructions are for the stock ROM, but can be applied to any ROM with a little modification. Enjoy!
Do the OTA update to 4.1.1 (if you're stock and haven't, already), and then......
[KERNEL][GPL][Linaro][OC 1.6GHz][UV][GPU+][ZRAM][SIO+V(R)] 2012-08-10 motley 1.1.1
From that thread, you need:
a) the 1.1.1 kernel of your choice
b) the 1.0.5b kernel with ramdisk (if you're already running a custom ROM with init.d support, you don't need this, nor do you need to create /system/etc/init.d in a future step)
You'll also need:
a) root
b) cwm
c) busybox (absolute must, make sure your symlinks are proper)
d) some type of root-enabled text editor (I use root explorer)
e) a full featured cpu/sd management app (I use System Tuner)
BEYOND THIS POINT, THERE BE DRAGONS. I'm not responsible if you FUBAR your device, but if you follow my instructions to the letter, you won't
0.5) READ THIS ENTIRE POST BEFORE PROCEEDING
1) install cwm and root your tab (if you haven't already)
2) reboot into CWM, flash the 1.0.5b kernel with ramdisk (if you're on stock or a stock-based ROM without init.d support), then immediately flash the 1.1.1 kernel you chose (gpu overclocking is nice and all, but I haven't found a game that doesn't run perfectly with the stock GPU speed of 416MHz..Looks great on benchmarks, though)
3) reboot back into JB, fire up root explorer, remount /system rw, create a folder in /system/etc called init.d (permissions rwxr-xr-x), create a file in it called S90zRAMandSpeedTweaks (permissions rwxrwxrwx), and long-press to open it in a text editor
4) make it look like this:
Code:
#!/system/bin/sh
#remount /data for faster i/o
mount -o remount,noauto_da_alloc /data /data
#disable fsync (controversial, I've been doing it for years with no real issues)
echo 0 > /sys/class/misc/fsynccontrol/fsync_enabled
#set zRAM size (recommended sizes are 64 and 128, as this compresses an actual block of RAM. Setting it higher will likely impede performance)
echo $((1024*1024*128)) > /sys/block/zram0/disksize
#use busybox to create and activate zram0, if busybox is not in /system/xbin, modify accordingly
/system/xbin/busybox mkswap /dev/block/zram0
/system/xbin/busybox swapon /dev/block/zram0
It's important to leave at least one trailing line in scripts. Just trust me, it's a linux thing.
*NOTE* The above script does NOT check to see if it was successful, but if you copied it directly and installed busybox to /system/xbin then it will work. Once you reboot in a few minutes, you can check by using the command "busybox free" from a terminal emulator or adb shell
5) Save the file, delete the .bak now in that folder, and close root explorer.
6) Open System Tuner, tap on the SD option, change cache to 1024 and scheduler to deadline
7) Tap the Voltage option and hit -25 4 times and save the settings as voltage_table_uv
8) Tap the CPU option and tap Boot Settings. For CPU and SD, set the method to init.d
9) Close System Tuner and reboot your device.
10 Profit/consume butter
It seems like a lot, but it really only takes about 15 minutes if you're a complete rooting n00b, and the end result is a buttery-smooth multitasking powerhouse (that blows iOS *away*). The 100mV undervolt also greatly extends battery life. I haven't had ANY issues at -100mV, but if you do, just increase it by hitting +25 on the voltage tab of System Tuner until you have something that works for you (in fact, you might want to start at -25mV and slowly grow it to -100mV, playing games and checking for instablity along the way)
It's also worth mentioning that if you're currently completely stock, you will need to unlock your bootloader to root and install CWM, and unlocking the bootloader wipes your device (no way around it, unfortunately. Hook your N7 up to your computer and backup the entire contents of /storage/sdcard0 to make restoring your data as painless as possible)
farmerbb's scripts - If you're having trouble getting your scripts to stick, or just don't want to be assed with installing System Tuner, use these! There are three different packages, for 64MB, 128MB, and 256MB zRam setups. Thanks, farmerbb!!
------- Revisions as of 9/1/12 -------
Fixed first line of script so it will actually run
Fixed zRam settings, as zRam is a block of actual RAM, not written to storage
Removed JRummy busybox installer as recommended. Use whichever you like, just make sure your symlinks are good
Awesome guide. Can't wait to try this out!
Thanks for the share..
Sounds good, will try this out tomorrow.
Dont suppose anyone has a copy if 1.0.5? Removed from Motleys OP
Nvm, went on web version and it was there
Sent from my Nexus 7 using xda app-developers app
Nice to see your thread here.
Sent from my GT-I9100 using xda premium
Copied this over from the other thread to show that it works:
clankfu said:
Here's my Androbench after applying the zRAM and fsync tweaks that Jay Aristide posted on page 6. I didn't really have a problem with lag but now my N7 is absolutely flying! Only minor annoyance is that my System Tuner settings won't stick after a reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here's my Androbench before I did the tweaks for comparison:
Click to expand...
Click to collapse
I'm out of thanks for the next few hours, so here's a ^5! Glad it's working well for you
Jay Aristide said:
*NOTE* The above script does NOT check to see if it was successful, but if you copied it directly and installed busybox to /system/xbin then it will work. Once you reboot in a few minutes, you can check by using the command "busybox free" from a terminal emulator or adb shell
/QUOTE]
What should it say here if it worked? Thanks for the guide
Click to expand...
Click to collapse
ChrisJ951 said:
What should it say here if it worked? Thanks for the guide
Click to expand...
Click to collapse
For the last line, you'll see numbers next to "Swap" instead of just zeroes.
Thank you very much for gathering and presenting all that information. One question though. Does any of this impacts battery life?
sotoskawasaki said:
Thank you very much for gathering and presenting all that information. One question though. Does any of this impacts battery life?
Click to expand...
Click to collapse
The undervolting increases your battery life.
so just to make sure before attempting this mod:
im on stock 4.1.1 rooted with cwm
i need :???????
motley_nexus7_with_stock_ramdisk_v1.0.5_build_39.zip
and witch one of those??
motley_anykernel_nexus7_1.1.1_NoGPUOC_build_220.zip (GPU stock 416GHz)
motley_anykernel_nexus7_1.1.1_GPU484_build_219.zip (GPU OC 484MHz)
motley_anykernel_nexus7_1.1.1_GPU520_build_218.zip (GPU OC 520MHz)
thanx
guinnes.s said:
so just to make sure before attempting this mod:
im on stock 4.1.1 rooted with cwm
i need :???????
motley_nexus7_with_stock_ramdisk_v1.0.5_build_39.zip
and witch one of those??
motley_anykernel_nexus7_1.1.1_NoGPUOC_build_220.zip (GPU stock 416GHz)
motley_anykernel_nexus7_1.1.1_GPU484_build_219.zip (GPU OC 484MHz)
motley_anykernel_nexus7_1.1.1_GPU520_build_218.zip (GPU OC 520MHz)
thanx
Click to expand...
Click to collapse
Yes to the first one and take your pick with the second ones the only difference is the GPU overclock, stock works just fine so try that first
Sent from my CM9 TouchPad using Tapatalk 2
guinnes.s said:
so just to make sure before attempting this mod:
im on stock 4.1.1 rooted with cwm
i need :???????
motley_nexus7_with_stock_ramdisk_v1.0.5_build_39.zip
and witch one of those??
motley_anykernel_nexus7_1.1.1_NoGPUOC_build_220.zip (GPU stock 416GHz)
motley_anykernel_nexus7_1.1.1_GPU484_build_219.zip (GPU OC 484MHz)
motley_anykernel_nexus7_1.1.1_GPU520_build_218.zip (GPU OC 520MHz)
thanx
Click to expand...
Click to collapse
The middle one works best IMO, but they will all do what you seek
Sent from my Nexus 7 using xda app-developers app
BIGSimon said:
Yes to the first one and take your pick with the second ones the only difference is the GPU overclock, stock works just fine so try that first
Sent from my CM9 TouchPad using Tapatalk 2
Click to expand...
Click to collapse
done, it seems is not working i still have no numbers next to "Swap" instead of just zeroes
guinnes.s said:
done, it seems is not working i still have no numbers next to "Swap" instead of just zeroes
Click to expand...
Click to collapse
Did you run the busybox installer you downloaded from the play store and have it install busybox to /system/xbin?
From terminal emulator, type
busybox which busybox
If it says anything other than /system/xbin/busybox you'll need to modify the script accordingly
Sometime in the next couple days, I'm going to make a cwm-flashable zip that does everything.. I just need to read up on how
Jay Aristide said:
Did you run the busybox installer you downloaded from the play store and have it install busybox to /system/xbin?
From terminal emulator, type
busybox which busybox
If it says anything other than /system/xbin/busybox you'll need to modify the script accordingly
Sometime in the next couple days, I'm going to make a cwm-flashable zip that does everything.. I just need to read up on how
Click to expand...
Click to collapse
Yes is installed in the right place and typing the busybox command it gives that directory. I jus copy and paste ur code when creating the file? ?is that OK, I have the 16gb model.
guinnes.s said:
done, it seems is not working i still have no numbers next to "Swap" instead of just zeroes
Click to expand...
Click to collapse
Mind didn't work until I ran the script via Script Manager. Download the app, find that zRAM script file you created in the init.d folder, select it, choose script, press the SU & boot icon up top and press Run. You'll see it run in command and say zRAM successful. Press Back and then save it.
For some reason, System Tuner doesn't seem to want to play nice with this script - at least for me.
guinnes.s said:
Yes is installed in the right place and typing the busybox command it gives that directory. I jus copy and paste ur code when creating the file? ?is that OK, I have the 16gb model.
Click to expand...
Click to collapse
If you're doing it in notepad, that's the problem. Notepad++ works if you choose Unix encoding
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys
Here I am again ( I changed name from deepakjoshid007 to CoD.<D.J.>) this time with a full Rom. Actually I love creeds rom and I was using it till now from the time it was released. But as you can see Pratyush
is busy or something so he is taking time to release an update so I decided to make my own Rom. So big thanks to Pratyush for his awesome Rom and some tutorials.
CoD Rom is based on stock DDLF2.. and the default theme is ICS Trans by me.
and Kernel is kuro kernel (a lil bit modified init.rc file to allow system to handle CPU
I think every kernel developer should add those 6 lines to init.rc so we wont need any 3rd party app.). I like Kuro kernel it is smooth, fast, minimalistic and stable.
So again big thanks to Kurotsugi for this nice kernel.
Features (Main)..
1. Fully transparent UI with JellyBean and ICS feel.
2. Modified stock apps no third party apps at all ( just one xperia launcher)
3. Improved swipe to remove notifications
4. 6 lockscreens
5. Stusbar tweaks + 15 toggles (EDT)
6. Features come from the kernel like governers and frequecy init.d.
7. Bravia Engine integrated
8. Fast and stable
Features miscellaneous..
1. Fully Deodexed , Zipaligned.
2. Removed some bloatwares.
3. Extended Settings app
4. ICS like Dialer and Phone app.
5. Statusbar fully jellybean themed.
6. Transparent MMS app with skins , removed auto SMS to MMS conversion and increased recipents limit.
7. Transparent Gtalk, contacts, music app.
8. New market with wish list and no restrictions ( But you only can see the app downloading not compitible app may or may not work) (credits to original poster)
9. All google apps already updated and market update compatible.
10. Smooth scrolling through disabled scrolling cache.
11. Added init.d scripts for batter performance ( Thanks to Kurotsugi again).
12. Xperia launcher with settings and already integrated Meego Icon theme.
13. Extended Power Menu
14. Multiple language support.
Notes..
1. This Rom doesn't support apps2sd as the kernel doesn't support it .In my opinion Link2SD is the best or you may use kuro script to mount ext partition as "data" .
2. Dont use dynamic range compression on DSP manager it will cause a sudden volume level increase it may harm your ears or earpieces. (Thanks to kurotsugi for this information)
3. Default governor for the cpu is set to conservative so if you fell some lag after installing the rom change the governor. I personally use blackcats for normal use. To change governor go to settings > parts > cpu settings then change the governer and scroll down and tick set on boot option
4. Regarding CSC stuff look at these post By bumslayer and By CarlDeancatabay (in windows we dont have terminal and those commands in bumslayer's method so use magiciso to extract csc.rfs then open rcovery folder you will find sec.csc.zip extract it.
Screen Shots ( you may go here for all screen shots or see Post#3 for some more )
Home screen
Phone and caller ID
Status Bar
Some Apps
Some Features
Download, Updates and instructions are in post#2
Different Mods are in Post#3
Fixes For small Bugs are in Post#4
All files are Flashable Zip files through CWM recovery
Use it at your own risk. me or xda or anyone else are not responsible for any damage to your device. (If you do everything right then there is no chance of somthing going wrong BTW.)
Instructions and Download
Rom is splitted in two parts one is the Rom and other is Google Apps I did it to resolve the issue of update them from market.
1. Download both CoDRomv1.zip and Gapps.zip
2. Put them in the root of your SDcard
3. If you dont have CWM then download it also and put it on the root of your SDcard
4.First backup all your data.(optional)
5.Reboot into recovery then flash the cwm zip and get into cwm recovery and backup your current Rom.(optional)
6. Now go CWM recovery's advance option and reboot the recovery then wipe data and cache from stock recovery.
7. Flash again CWM recovery and wipe data and cache there also.
8. Now select install zip from SDcard and select CoDRoMv1.zip
9. Wait till it gets installed then wipe data and cache(optional) and reboot.
10.It will take time to reboot just wait..............
11. Use the Rom for sometime play around with the settings see if everything is working or not
12. now after using it 15 mins reboot into recovery and flash Gapps.zip and reboot
13 Installation done. :good:
Guys I looked at file downloads on mediafire and found that Rom have nearly double downloads than Gaaps. some people here are PMing me for Gtalk force close and not being able to create a google account so for all the flashers read the instructions and flash the Gapps also. Without it you wont be able to use google services.
>>>> Download links <<<<
>>>> CoDRoM.zip <<<<
>>>> Gapps.zip <<<<
After Installation settings ...(optional)
1. first you should check the cpu settings working or not
2. I have integrated the meego theme you may have it by going to launchers preferences then appearance and select Icon Packs then select built-in Meego.
3. go to launcher preferences and then Home screen then untick Noscreenindicator(portrait)(Its actually auto hide setting) then tick it again its recommended or you will have some problems with widgets.
Click to expand...
Click to collapse
Updates and Patches
Patch 1.1
1. This patch will add EPM ( Extended Power Menu)
2. Removed CodRom text from lockscreen and changed jog dials to blue colors
3. Toast enter, exit animation changed.
Download this Patch
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Patch 1.2
1. This patch will add 4-way boot menu
2. Fixed a small bug in EPM when using non transparent mod
Thanks to ianczarina to make this and evanlocked for the guide
Download this Patch
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Modifications
UI Mods
Click to expand...
Click to collapse
1. Non Transparent
Download Non transparent Mod
Note : Download the AlarmClock fix from post #4
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Lockscreen Mods
Click to expand...
Click to collapse
1. Silver Lockscreen
Download Silver Lockscreen Mod
Click to expand...
Click to collapse
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------
Bug Fixes
Fixes for small bugs
1. Alarm Clock fix in NonTransparent Mod
This will fix the bug (text not showing) in alarmclock when using nontransparent mod
Click to expand...
Click to collapse
Download AlarmClock fix
Click to expand...
Click to collapse
You can't make a post w/o download link (coming soon...)
Sent from my GT-I9300 using xda premium
i wonder what is the 6 line in init.rc...
Its just chown root system for cpu freq and governer files
and chmod 0644 for the same to control them from system app without root access
its a basic kernel feature of CM7
Any ss bro?
Sent from my GT-S5360 using xda premium
ss
ANOTHER ROM??
SIR will u please post ss
screenshot, please !
Guys just wait a bit I am updating the thread it takes a lil bit time..
can you give me your init.rc?I'd like to see it.
screen shots?
Sent from my GT-S5360 using xda premium
@OP
atlast you released your rom
awsome .....now swiching from creeds to CoD RoM
i have a request , will you please add a carrier image to your status bar in left side ( as in repencis rv3.5 )
have a llok at this ...carrier image " ****ED "
here is the systemui.apk of a repensis theme
http://www.mediafire.com/?fzqjt5hw9lial3d
note that in this theme the carrier image is in right side not in left
Click to expand...
Click to collapse
kurotsugi said:
can you give me your init.rc?I'd like to see it.
Click to expand...
Click to collapse
these are the lines
Code:
# chown gps system /data/gps
[COLOR="Blue"] # allow system to modify cpufreq control files
chown root system /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
chmod 0664 /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
chown root system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
chmod 0664 /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
chown root system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
chmod 0664 /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq[/COLOR]
on boot
it looks awesome
want to flash it but waiting a important business call
thus the picture on the rom was a default to the rom?????
ehm...ehm...I hate to say it but could you remove some of the ss? porn n nudity is highly forbidden in XDA. not everyone here is adult. in fact, most of user here is kid n teens. before mod give you any warn or close this thread you'd better remove them.
A doubt
how u took the screen shots?? i cant see any options for screenshots??
-Post deleted-
[APP][ROOT]Zram & Swap Ctrl V2.5.5[14.4.13]>>Zram|cache|Partition NEW!FAST CACHE SWP!
Features:
Slider Controls for:
>>> Zram virtual disk size selection slider
>>> Cache based Soft swap using a swap file in the fast cache partition. With is own size selection slider.
>>> Swappiness selection slider with instant setting.
>>> Hard swap via a swap partition if available on your ExtSD card.
>>> Independent ON/OFF toggles for the three supported types... ( yes you can try combinations!! )
>>> Immediate set button and a save whichever configuration is current to init.d boot scripts.
>>> Requirements a kernel with swap support and zram but you can use the other features without zram support.
This was developed for Perseus but should work with any kernel that supports Zram/swap.
V2.1 -fixed swappiness not setting correctly.
V2.2
-Made with tasker V4
-Set on boot will now disable zram on boot if zram is disabled when boot button tapped.
V2.3.2
-Running dialogs
-Now with internal memory cache file situated Swap option.
-improved Boot-set init.d support.
-fixed init.d creation bug and other minor bugs
V2.5
-swap priority setting with custom busybox install
-FASTER cache based swap with 4 parallel swap files set with equal priority
- revamped UI
---------------------------------------
This was developed for Siyah and Perseus but should work with any kernel that supports Zram/swap.
IMPORTANT: please make sure super su app re-grants permissions after install!!
---------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------------
This was developed for Siyah and Perseus but should work with any kernel that supports Zram/swap.
IMPORTANT: please make sure super su app re-grants permissions after install!!
---------------------------------------
Thanks to mattiadj (best multitasking fix) for the concept of cache file-based swap
And Gokhan Moral for his ongoing help as I learn shell scripting
---------------------------------------
---------------------------------------
UPDATE: Zram & Swap Ctrl V2.5.5
>>2.5.5 Tweaked 'dd' command which makes the swap files. should eliminate wrong size creation.
>>2.5.5 Cache size detection should work on CM10.1 roms and limit slider to 100MB less than the total free space.
>>2.5.5 Scrapped timeout and auto-rotate settings. will make landscape scenes eventually.
DOWNLOAD: http://db.tt/cQcrOM3C
CWM busybox install if app install fails:
http://db.tt/BPJPR8jI
(NOTE: the busybox will not affect your rom busybox and will only be used by this app)
---------------------------------------
---------------------------------------
>>>UPDATE: Zram & Swap Control V2.5.1<<<
DOWNLOAD: http://db.tt/rG1B0WVu
-Bug fix: 2.5>>2.5.1 App will now make the data folder: /sdcard/Android/data/siyahmods/ if not present.
EXCLUSIVE NEW FEATURE!!
- Swap PRIORITY settings made possible via a custom busybox which the app will download and Auto-install.
---------------------------------------
NOTE!! This custom busybody WILL NOT replace your main busybox. So don't panic. Only this app will use it. It will reside in /system/bbsiyahmods/
---------------------------------------
- Q: Why is a custom busybox necessary?
A: Because the pared down version of busybox used in CM and many other ROMs does not have the ability to set swap priorities.
- Q: What is so special about being able to set swap priorities?
A: Linux sets the priority in order that to make them active. So to activate a Hard swap partition for example it is necessary to first turn off zram and turn it on again after to ensure it has the highest swap otherwise it won't be used properly.
- Swap activation is much faster now!
A2: Secondly it is now possible to set several swaps with THE SAME priority. So you can have several swaps used equally. I had a theory that perhaps using several swap files in /Cache might make the overall swap work faster... AND IT DOES!!
- CACHE BASED HARD SWAP IS NOW MUCH FASTER!.... (using 4 parallel swap files set with equal priority)
Please before anyone disses this claim please try it for yourself. I don't know the technical reason why but there is no doubt it improves performance markedly!
Re: [APP][ROOT] Zram & Swap Ctrl V2.3.2 [2.4.13] >>Zram|cache|Partition
Reserved...
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Reserved...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man for this really useful app which is the only one of its kind till now.
I just have 2 bugs to report. The first one is that after enabling file swap and setting it to the max, everythig goes well. But after opening your app after a while, I find it disabled again for no apparent reason.
The second bug which I have no idea how it relates to your app is that my s3 screen stopped rotating and did not timeout. I found that the auto rotate option was unchecked and the screen timout was set to 10 mintues. I never had this issue before and the only thing that I was working with when this happened was the zram control.
Thanks again.
Re: [APP][ROOT] Zram & Swap Ctrl V2.3.2 [2.4.13] >>Zram|cache|Partition
Yazan76 said:
Thanks man for this really useful app which is the only one of its kind till now.
I just have 2 bugs to report. The first one is that after enabling file swap and setting it to the max, everythig goes well. But after opening your app after a while, I find it disabled again for no apparent reason.
The second bug which I have no idea how it relates to your app is that my s3 screen stopped rotating and did not timeout. I found that the auto rotate option was unchecked and the screen timout was set to 10 mintues. I never had this issue before and the only thing that I was working with when this happened was the zram control.
Thanks again.
Click to expand...
Click to collapse
Thanks for the bug report. Yes the auto rotate and timeout changes are supposed to revert back but it's broken it seems
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Thanks for the bug report. Yes the auto rotate and timeout changes are supposed to revert back but it's broken it seems
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
+1
after reboot the settings gone.
Xperia P / ICS!
4rch0 said:
+1
after reboot the settings gone.
Xperia P / ICS!
Click to expand...
Click to collapse
OK please look in your init.d folder and make sure you have files there.
You have to tap set on boot after changes made... But there could be some other bug
Sent from my GT-I9300 using Tapatalk 2
Will try to sgy..
edit-
Cant installing min sdk ver 14.. can u build with min sdk ver 10 ??
Thanks
savie said:
Will try to sgy..
edit-
Cant installing min sdk ver 14.. can u build with min sdk ver 10 ??
Thanks
Click to expand...
Click to collapse
Sure!
Sent from my GT-I9300 using Tapatalk 2
•°•♡ⓣⓗⓐⓝⓚⓢ♡ •°•
for sharing.
Testing on SGM
Sent from my GT-S5570 using Tapatalk 2
rlorange said:
Sure!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Guys I can't build with compatibility below 14 with the new tasker V4... However I have dual boot on my phone so I will install the old version of tasker on my other ROM to do this for this thread... In the mean time everyone can follow the main version on my SGS3 app thread...
http://forum.xda-developers.com/showthread.php?p=39650148
[APP][12/4/13]Zram & Swap Control [CACHE & PARTITION] V 2.4.1 FIXED 2.4!
Update: V2.4.1
Big improvements!
>> faster load new style
>> info popups and swap active data info button
>> fixed busybox issue... Basically only some versions of busybox support swap priority settings and my detection system was CRAP! So now if you have hard or soft swap already active and set zram to have both active. All active swaps are first switched off so zram can bev switched on first guaranteeing it has the highest priority OTHERWISE IT WON'T BE USED UNTIL YOUR OTHER SWAP IS FULL!!
this is complicated to please use the new "i" button to check swap status and report any problems with this... Remember if zram is active it should always have a priority of -1 or it won't be active until other swaps are full.
I hope I have got all possible combinations accounted for... Argh hurt my brain this one
Sent from my GT-I9300 using Tapatalk 2
Bugfix update: V2.5.1
http://db.tt/rG1B0WVu
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Bugfix update: V2.5.1
http://db.tt/rG1B0WVu
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
thanks sir.. really great job ! will try it
rlorange said:
Bugfix update: V2.5.1
http://db.tt/rG1B0WVu
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
rlorange,
Although I used your app successfully on my s3, I had an issue using it on my xoom related to the app interface problem running in landscape mode. I however managed to overcome this issue by using a rotate lock app to force your app to run in portrait mode.
I still have one problem left is that hard swap is not working since it can't detect the swap partition. My xoon sd card second partition is a primary linux swap partition, and hard swap worked fine on the same sd card on my s3.
The xoom is running Android 4.2.2 and the s3 is running 4.1.2
What are your thoughts on this?
Yazan76 said:
rlorange,
Although I used your app successfully on my s3, I had an issue using it on my xoom related to the app interface problem running in landscape mode. I however managed to overcome this issue by using a rotate lock app to force your app to run in portrait mode.
I still have one problem left is that hard swap is not working since it can't detect the swap partition. My xoon sd card second partition is a primary linux swap partition, and hard swap worked fine on the same sd card on my s3.
The xoom is running Android 4.2.2 and the s3 is running 4.1.2
What are your thoughts on this?
Click to expand...
Click to collapse
OK glad you got it working on your zoom!
I'm sure it will be hit and miss using on a device other than an S3...
This is what I use to detect swap:
fdisk -l /dev/block/mmcblk1| grep swap | awk '{print $1}'
So I guess the SD card Mount terminology is dissent l different for the zoom.
Do you know which block is your extSD?
Sent from my GT-I9300 using Tapatalk 2
I'm getting missing library error when installing the apk file. Tried installing the usual and using the terminal.
Running on a MIUI based rom.. JB 4.1.2. Would love to get zram up and running as my phone only has 512 mb ram
rlorange said:
OK glad you got it working on your zoom!
I'm sure it will be hit and miss using on a device other than an S3...
This is what I use to detect swap:
fdisk -l /dev/block/mmcblk1| grep swap | awk '{print $1}'
So I guess the SD card Mount terminology is dissent l different for the zoom.
Do you know which block is your extSD?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I think it is /dev/block/mmcblk0p2
But how can I know for sure?
Put this into terminal emulator
fdisk -l /dev/block/mmcblk0| grep swap | awk '{print}'
Sent from my GT-I9300 using Tapatalk 2
UPDATE: Zram & Swap Ctrl V2.5.5 [/B]
>>2.5.5 Tweaked 'dd' command which makes the swap files. should eliminate wrong size creation.
>>2.5.5 Cache size detection should work on CM10.1 roms and limit slider to 100MB less than the total free space.
>>2.5.5 Scrapped timeout and auto-rotate settings. will make landscape scenes eventually.
DOWNLOAD: http://db.tt/cQcrOM3C
CWM busybox install if app install fails:
http://db.tt/BPJPR8jI
(NOTE: the busybox will not affect your rom busybox and will only be used by this app)
Sent from my GT-I9300 using Tapatalk 2
rlorange said:
Put this into terminal emulator
fdisk -l /dev/block/mmcblk0| grep swap | awk '{print}'
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
This is what i get.
[email protected]:/ $ su
[email protected]:/ # fdisk -l /dev/block/mmcblk0| grep swap | awk '{print}'
/dev/block/mmcblk0p2 85121 121216 1155072 82 Linux swap
[email protected]:/ #
Thank you a lot for the last update. Hard swap seems to be working correctly. When I hit 'i' it shows hard swap size of 1 GB although the app interface shows that hard swap is on with size of 0.
Can this damage our internal memory of the phone , s3 already suffers from a emmc bug so i dont want to speed the brick time .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PROJECT DIRECT INJECT
Exit_Only said:
Welcome to the world of direct injection, Its been unavailable for your android smartphone...UNTIL NOW. This tweak package takes your android device to a whole new level of awesomeness by direct injecting high octane scripts into your turbocharged engine.
This is a collection of scripts from multiple developers repacked into one package. Big thanks to all the developers involved.
Click to expand...
Click to collapse
This mode is incompatible with some devices\firmwares or create various system problems! Make a nandroid backup before installing.
General Q & A Section:
Q.) How can I tell if this is actually working or not?
A.) Open Terminal Emulator and type this command...
Code:
su
directinject
Q.) How can I see if rambooster work properly?
A.) Open Terminal Emulator and type this command.
Code:
su
rambooster
Q.) How cand I see if entropy working properly?
A.) Open Terminal Emulator and type this command...
Code:
su
entro
Q.) How can activate RNGD and entro binaries?
A.) Open Terminal Emulator and type this command...
Code:
su
entropy
Q.) How do I turn on entropy?
A.) Open Terminal Emulator and type this command...
Code:
su
entropy_on
Q.) How can I stop entropy?
A.) Open Terminal Emulator and type this command...
Code:
su
entropy_off
Q.) How do I uninstall it?
A.) Download the uninstall, you put on your card and then flash the file.
Code:
su
uninstall
reboot
Q.) Can I use DirectInject and Crossbreeder?
A.) Yes, you can.In the first time disable entropy (on DirectInject) then install Crossbreeder.
Q.) How do I install NOS Control?
A.) NOS Control installs like any .apk
Q.) How can I get CPU Tuner on my device?
A.) Open Terminal Emulator and type this command...
Code:
su
cputuner
GENERAL WARNING: Do NOT I repeat DO NOT use ANY other tweaks with this package. There are only two approved scripts that are compatible with this, Seeder Entropy and Cross breeder. If you choose to do so after reading this you do so AT YOUR OWN RISK. If you ask bout other tweaks in my thread YOU WILL BE IGNORED.
WHAT IS NEEDED TO INSTALL Project Direct Inject:
1.) Root access (su binary required)
2.) Busybox v1.20.4+ w/ run-part support (busybox required)
3.) Need to be on 2.3.3+ gingerbread or higher
4.) Terminal Emulator app app installed
5.) Enough space in your /system partition (10 mb available minimum)
If you do not meet these requirements then DO NOT USE IT!!!
WHAT IS NEEDED FOR CPU TUNER:
1.) Need a fully unsecured boot.img (Look inside "default.prop", if it says "ro.secure=0" then your kernel meets this requirement, if it says "ro.secure=1" then cputuner WILL NOT work!!!)
2.) Your need a kernel that supports max overclock freq of 1.3ghz and a min freq of 384mhz.
3.) Need a kernel that has these 3 governors (Conservative, Ondemand, and Performance)
4.) On HTC Sense ROMs you need to disable per flock (Setcpu will do this for you)
If you don't meet ALL these requirements then do NOT attempt to use CPU tuner!!!
Installation
1.) Make sure you meet the requirements above
2.) Download the latest version of Project Direct Inject
3.) Boot into recovery (TWRP or CWM doesn't matter)
4.) Make a nandroid backup
5.) Flash inside cwm recovery
6.) Reboot
7.) Press thanks button me and Exit_Only
APK Direct Inject Control
What i need to install this app:
Terminal Emulator
Project Direct Inject
Direct Inject is an application that gathers in one place all orders of Project Direct Inject
Ryuinferno said:
Behold.....
THE NOS Controller!!! Since many of you find it troublesome to key in commands every time, I wrote up a damn simple app to save those finger punches!!! Well, I am currently limited by my knowledge of Java, this is the best I can do for now (Requests? Be prepared, I won't attend to any as I can't add more features yet...more learning to do...sorry... )
But, take note that you will need to install the latest version of 4cyl Turbo v0.5.7_r2 w/ 250 shot NOS first and have Terminal Emulator installed before using this app! Do not be silly and think that this app is gonna do everything for you!
The app is very simple and straightforward, so no instructions will be given here...enjoy!
Click to expand...
Click to collapse
Download Direct Inject Control: Click Here
About the Tweaks:
8 init.d scripts total (11 init.d scripts if you opt for NOS Entropy, zRAM, and Int2Ext)
Zipalign /data & /system apps on each boot ( With detailed Logging of Activities)
Calibrates Battery automatically (make sure your battery is at 100% before flashing)
NOS Entropy with Light, Moderate, and Aggressive Governors (Optional during install, Moderate is default governor)
Ext4 Tweaks
Zero UI Lag
Maxed out speed & Performance
Disables most logging activities
GPS enhancements (USA/CANADA/MEXICO/ALASKA Only)
Sqlite3 for Jellybean (Complied from CM10.1 Source)
4.2.2 Binaries (Better app processing, Complied from CM10.1 Source)
Disables logcats
Get your Privacy back (No internet redirects)
Lots of kernel tweaks (Disabled most kernel sleeps and Adjusted Linux values)
Extended Reboot Commands
VM heap tweaks
Net speed tweaks
Ext4 Perfect Remount
Outstanding battery life
Sqlite3 Reindexed and Vacuumed (If you see errors in db files please ignore, this is normal operation)
RAM booster and Media Server Killer binary (Very Aggressive RAM Recovery tool)
4Cyl Turbo Binary (Exit_Only Exclusive)
Stable relase:
Download v.3.2.6: Click here
Code:
Fixed the three remaining bugs in v3.2.5_t9 and removed the touchscreen tweak as it was causing screen issues on some devices!!!
Download v3.2.4: Click Here
Code:
v3.2.4 - Fixed ALL bootloops on ALL devices
Added seperate flashable zips for Sqlite3 Binaries in SECOND POST BELOW OP
Removed Max Freq mod in CPU Tuner
Removed needed interactive Gov and now using Ondemand Gov
Updater script now backups and restores CronMOD int2ext scripts by default
Updater script now backups and restores CM init.d scripts for Selinux and Userinit
Fixed ALL remaining bugs
Added new entropy scripts for on & off Functions
Updater no longer removes Crossbreeder during install process
Added Sqlite3 Database Optimizer Script (YOU NEED TO FLASH THE REQUIRED SQLITE BINARY IN THE SECOND POST BELOW THE OP)
Fixed Deepsleep script to work correctly without errors
Much more im sure I am forgetting!!!
Download v3.2.2: Click here
Code:
v3.2.2 - Fixed All Boot Looping issues on ALL DEVICEs
Fixed Bootlooping on HTC Sense Devices
Removed Zipalign on boot script and binary
Added BRAND NEW Cpu Tuner script and binary
Pick between three different profiles (Battery, Performance, or Balanced)
Fixed Battery drain on single core devices
Adjusted Minfree values to be more aggressive
Fixed Assert Error from test releases
Read Ahead set to 3072kb
Updated Logging engine
Plenty more I am forgetting!!!
Download v3.2.1: Click here
Code:
Lots of upgrades to cputuner with new CPU core log engine
Added brand new move dalvik script
Much more coming later!!!
Download v.3.0.0: Click here
Code:
v3.0.0: Started over with complete rebuild
Must lighter and much faster
Installs correct busybox to /xbin
Only 2 binaries now 'directinject' & 'rambooster'
Updated rambooster + added init.d script to run ram booster every 45 minutes
Auto runs zipalign every 2 days or 48 hours
Patched rngd binary for better entropy generation without killing battery life
Adjusted Linux values
Brand new interval script
Brand new iptable rebuild script
Much much more!!!
Download v.1.0.2: Click here
Code:
v1.0.2: Fixed image issue
Added newest code to entire project
Added new functions to sqlite scripts
Added new warnings during install
Download v.1.0.0: Click Here
Code:
v.1.0.0. A new world, a new script
[B]FIRST RELEASE OF PROJECT DIRECT INJECT[/B]
Download v0.7.0: Click here
Code:
v0.7.0: Added new and improved DNS caching (Similar to crossbreeder)
New init.d script that automatically activities DNS caching
Added new DNS tweaks for build.prop
My new custom 'dnshelp' binary that will help you use dnsmasq binary
Modified rambooster (Two custom options 'Moderate' & 'Aggressive')
Fixed Adj minfree script to work right
Much much more I am forgetting
Download v0.6.0: Click here
Code:
vo.6.0. Adjusted sysctl values
Made sysctl tweaks optional
Updated 4cylturbo binary to include optional install pieces
Updated install.sh with new code and new backups
Added bash and nano binaries along with bash, nano, & terminfo folders for /etc (Two diff versions)
Added sqlite3 and script (Two diff versions)
Fixed bash and nano not working correctly
Updated uninstall.sh to restore more stock items and delete more stuff
Adjusted hedge values
Added in optimized RAM tweaks (much better ram management vs v0.5.7-r2)
Fixed multiple script errors and adjusted values
Full zip size is much bigger (7.03mb)
Other stuff I'm sure I am forgetting. THIS IS A MAJOR UPDATE.
Download v0.5.7r2: Click here
Code:
v0.5.7r2 Adjust sysctl.conf correctly this time
Removed disable vsync
Removed cron (These newer versions of busybox don't support "ENABLE_CRON" so script is useless)
Fixed logging on scripts
Adjusted vm values slightly
Download v0.5.7r1: Click Here
Code:
v0.5.7r1 - Added extended reboot scripts
Fixed root issues
Fixed greenify issues
Updated install script
Added uninstall script (This will remove nos 100% from your device)
Updated directions inside zip file
Removed some sysctl commits
New performance boosters added
Download v0.5.6: Click her
Code:
v0.5.6: - Reverted back some scripts
Removed Fix Permissions script
Fixed up install.sh script (Thanks Poo)
Fixed root issues on Samsung Galaxy S Advance
Download v0.5.5: Click here
Code:
This version should solve problems with freezes and root loss.
Download v0.5.4_r1: Click here
Code:
v0.5.4_r1: - Fixed random reboots some people were having (myself included)
Made more stuff optional during install
Fixed root access issue some users experience (I never had this issue so I need feedback)
Updated ad blocker
Updated logging engine
Much smoother and zero lag
Download v0.5.4: Click here
Code:
v0.5.4: - THIS IS ONLY EXECUTIBLE VIA TERMINAL EMULATOR OR SCRIPT MANAGER.
THIS IS NOT NOT NOT RECOVERY FLASHABLE
Added init.d script to add init.d support if your ROM/Kernel does not support it already (Optional during Terminal install)
RAMBooster Binary is now much more Aggressive at clearing RAM
Updated 4Cylturbo binary with code changes
Fixed ALL Logs and Script Errors
NOS Entropy Governor is moderate by default instead of light
Removed All Code Errors from Sysctl Config
Added 'S' to beginning of all scripts to support Samsung Galaxy S 1 Owners (You guys are so old skool :P )
Added int2ext script (Thanks to Cronicory for original)(WARNING: YOU MAY HAVE TO FORMAT YOUR SD CARD TO USE THIS SCRIPT. YOU CAN OPT OUT OF THIS DURING INSTALL)
Logcat disabling script is now 100% Optional during install (YOU CAN NOW KEEP LOGCATS ACTIVE)
Added Bash and Nano Shell Binaries (COMES IN HANDY FOR BASH SHELL SCRIPTS LIKE CRON)
Download v0.5.2: Click here
Code:
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
Fixed /data logs for scripts
Fixed most script errors
Adjusted a few things here and there
More to come later
Download v.0.5.1: Clcik here
Code:
v0.5.1: - Fixed logging errors
Fixed ALL install.sh errors
Added Team Kernelizers build.prop injector script (Thanks RErick & Decialman)
Build.prop injector is now a option in install.sh
Added auto reboot to install.sh (SOME DEVICES WILL NOT ALLOW THIS TO WORK, SOME WILL HAVE TO REBOOT MANUALLY)
Fixed all init.d script errors
Updated 4cyl turbo engine logger
Added new directions to README_users.txt
Will add more as I remember it
KNOWN ISSUES & BUGS:
1.) WiFi tethering DOES NOT work when using this tweak package!!! There is no solution to this problem and I am not trying to find a solution, sorry for the inconvenience!!!
CURRENT WORKARUND: Flash the newest crossbreeder!!! This will fix your borked tethering!!!
Uninstal
Code:
su
uninstall
reboot
Standard Disclaimer: Flash at your own risk. Myself nor XDA is responsible for any damage this thing may cause you.
For this wonderful work we must thank Exit_Only
Original thread: Click here
enricogrim said:
Hi,
I have an old version of NOS, before installing a newer version it's better I uninstall the old one or install the new one directly?
thank you very much
Click to expand...
Click to collapse
You can just install the new one (through recovery or terminal depending on the release version) since the installer replaces it's own old/invalid files
Sent from my GT-I9070 using xda premium
enricogrim said:
Hi,
I have an old version of NOS, before installing a newer version it's better I uninstall the old one or install the new one directly?
thank you very much
Click to expand...
Click to collapse
Exactly what he said. 4cyl turbo has implemented a script that deletes all files init.d that you have and replaces them. For a new installation, whether it is installed by CWM or Terminal is not required before uninstallation, just install the new version.
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
Sent from my GT-I9070 using xda app-developers app
kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
this mean don't install this mod correct
just try again and put the folder install on SDCARD or SDCARD0
kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Try v0.5.2 instead since it's flashable and see if it works.
Flash it in TWRP/CWM and I suggest you mount system first before flashing the zip. Also, as always don't forget your nandroid backup If it did work, then you can proceed to install the latest version through terminal if you want to.
Damn mounting/unmounting always confuses me...By mounting the system do u mean mount or unmount..
Coz i think in cwm it shows like this
"A Blue Tick and it shows unmount storage...and a blank box when its shows mount storage"
So just tell which 1 should i go with, tick or untick
And after flashing it, will the terminal command "4cylturbo" respond??
Sent from my GT-I9070 using xda app-developers app
kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
For v0.5.4 follow these instructions
Code:
1.) DOWNLOAD NEWEST VERSION, IF YOU WANT TO USE NOS ENTROPY THEN PLEASE REMOVE SEEDER OR CROSSBREEDER FIRST, YOU CAN FIND THE NEEDED UNINSTALL SCRIPTS IN SEEDERS OR CROSSBREEDERS THREAD. USE XDA SEARCH TO FIND IT.
2.) DOWNLOAD TERMINAL EMULATOR APP FROM GOOGLE PLAY STORE... (IF YOU ALREADY HAVE IT THEN SKIP THIS STEP)
3.) EXTRACT "install" FOLDER FROM /sdcard FOLDER INSIDE ZIP AND PUT IT ON YOUR ACTUAL "/sdcard"...
4.) EXIT OUT OF WHAT EVER FILE EXPLORER YOU ARE USING...
5.) OPEN THE TERMINAL EMULATOR APPLICATION...
6.) TYPE THIS COMMAND IN TERMINAL EMULATOR...
[B]
su
sh /sdcard/install/install.sh
^
There is a space here!!![/B]
FOLLOW THE PROMPTS AND CHOOSE WHAT YOU WANT INSTALLED!!!
7.) REBOOT YOUR DEVICE FOR ALL MODS TO TAKE AFFECT... (Rebooting is a REQUIREMENT, Failure to reboot WILL cause random app force closings)
8.) ENJOY THE SPEED AND PERFORMANCE :D
This script hangs phone and creates problem in phone UI
Sent from my GT-I9070 using xda app-developers app
ramansehra said:
This script hangs phone and creates problem in phone UI
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
What ROM and what version of 4cyl you use?
Very good, Great job
Enviado desde mi GT-I9070 usando Tapatalk 2
I'm currently using LightJB 1.2 with co core 6.0.
. 0.4.2 version of 4cylturbo works good with me, but this version hangs my phone to black screen while using.
Sent from my GT-I9070 using xda app-developers app
kanidevil666 said:
Did what u said...follwed every step..said yes to every promt...still after rebooting when i type su 4cylturbo or rambooster..it says doesnot exist..where did i go wrong...
PS I'M A USER!!
View attachment 1959685
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Have you updated your busybox?
Sent from my GT-I9070 using xda app-developers app
v5.2
not able to flash through recovery method
Bhaji eh recovery naal ni hona,
Tuhanu terminal emulator te jake command type karni paini aa
Sent from my GT-I9070 using xda app-developers app
sarabjit singh said:
not able to flash through recovery method
Click to expand...
Click to collapse
The file is named 'NOT FLASHABLE'.You have to install it via terminal emulator.
Sent from my GT-I9070 using xda premium
flash
ramansehra said:
Bhaji eh recovery naal ni hona,
Tuhanu terminal emulator te jake command type karni paini aa
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
read 1st page carefully
---------- Post added at 06:57 PM ---------- Previous post was at 06:53 PM ----------
rushilkr said:
The file is named 'NOT FLASHABLE'.You have to install it via terminal emulator.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
IF USING FLASHABLE VERSION Find the flash able zip file on your sdcard then flash it.
7.) Boot out of recovery [ONLY FOR FLASHABLE VERSION]
read 1st page carefully
sarabjit singh said:
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
read 1st page carefully
---------- Post added at 06:57 PM ---------- Previous post was at 06:53 PM ----------
v0.5.2: - THIS IS NOW A FLASHABLE ZIP AGAIN
IF USING FLASHABLE VERSION Find the flash able zip file on your sdcard then flash it.
7.) Boot out of recovery [ONLY FOR FLASHABLE VERSION]
read 1st page carefully
Click to expand...
Click to collapse
Read the title of this thread.Its about v 0.5.4 .It is NOT flashable.
Sent from my GT-I9070 using xda premium
Datico said:
Very good, Great job
Enviado desde mi GT-I9070 usando Tapatalk 2
Click to expand...
Click to collapse
ramansehra said:
I'm currently using LightJB 1.2 with co core 6.0.
. 0.4.2 version of 4cylturbo works good with me, but this version hangs my phone to black screen while using.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I had the same problem too. A new version came out, hopefully all issues resolved. Check OP!
sarabjit singh said:
not able to flash through recovery method
Click to expand...
Click to collapse
Only version v0.5.2 is with flash method.
Flash method:
Code:
1.) Make sure you meet the requirements above
2.) Download the version of NOS FLASH
3.) Boot into recovery (TWRP or CWM doesn't matter)
4.) Make a nandroid backup
5.) Find the flashable zip file on your sdcard then flash it.
6.) Boot out of recovery
To me it worked without problems.
0.5.2
Grady22 said:
I had the same problem too. A new version came out, hopefully all issues resolved. Check OP!
Only version v0.5.2 is with flash method.
Flash method:
Code:
1.) Make sure you meet the requirements above
2.) Download the version of NOS FLASH
3.) Boot into recovery (TWRP or CWM doesn't matter)
4.) Make a nandroid backup
5.) Find the flashable zip file on your sdcard then flash it.
6.) Boot out of recovery
To me it worked without problems.
Click to expand...
Click to collapse
i tried 0.5.2v dude but not succeed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OPERATION KILLJOY™
S & A TECHNOLOGY™ PRESENTS...
Operation Killjoy™ This tweak package takes your android device to a whole new level of awesomeness. Big thanks to all the developers involved.
THIS TWEAK PACKAGE IS 100% UNIVERSAL ON ALL DEVICES RUNNING ANDROID 2.3 Gingerbread OR HIGHER!!!
CREDITS:
@malybru (for the awesome banner)
@LENAROX(For all your recommendations)
@Koush(For being an awesome coder)
@CyanogenMod(Do I need to say why)
@zeppelinrox(Awesome scripter, most scripts on xda is because of your genius)
@Chainfire(Amazing app and script developer)
@ImbaWind(ICS ram flush boost script)
@RErick(Team k)
@decialman(Team k)
@castle_bravo(Team k)
Honorable mentions: @slaid480 (Just in case something matches) @paget86 (He's a great dude) @darky (Zipalign original developer)
Any one else? If I forgot you please pm me and it will be fixed ASAP!!!
General Q & A Section:
Q.)How can I tell if this is actually working or not?
A.)Open Terminal Emulator and type this command...
Code:
su
killjoy
Q.)Help!!! Why is my phone bootlooping?
A.)I need more detailed information like what device you have, what version of android are you on, what recovery are you using? Better yet please get me a full adb boot logcat as well.
Q.)Build.prop tweaks did not inject!!! Why?
A.)You don't have init.d support!!!
Q.)But my kernel supports init.d so why is my buildprop not getting injected?
A.)Well obviously you don't have init.d support cause if you did the build.prop would have been injected.
Q.)How can I test to see if I have init.d support?
A.)Look in /data/killjoy and open the log files, if it says "YOU DO NOT HAVE INIT.D SUPPORT" then that will answer your question!
Standard Disclaimer: Flash at your own risk. If your phone blows up after flashing this and you point the finger at me I will laugh at you! Neither myself or S & A Technology will be liable for your expensive paper weight!
GENERAL WARNING: Do NOT I repeat DO NOT use ANY other tweaks with this package. If you choose to do so after reading this you do so AT YOUR OWN RISK. If you ask bout other tweaks in my thread YOU WILL BE IGNORED.
WHAT IS NEEDED:
1.) Root access (su binary required)
2.) Need to be on Android 2.3 or higher
3.) Terminal Emulator app
4.) Enough space in your /system partition (11 mb available minimum)
If you do not meet these requirements then DO NOT USE IT!!!
5.) No other mods installed including Xposed framework
6.) Well versed in flashing and handling basic Linux scripts
1.) Make sure you meet the requirements above
2.) Download the latest version of Operation Killjoy™
3.) Boot into recovery (All recoveries supported)
4.) Make a nandroid backup (Please do NOT complain to me that you lost your data after bootlooping and you didn't make a backup)
5.) Flash inside custom recovery
6.) Reboot...
7.) Profit...????
ABOUT THE TWEAKS:
1.) Multiple init.d script w/ built in logging of script activities located in /data/killjoy
2.) Entropy Generator via either 3 different rngd binaries or 2 different haveged binaries
Turn on entropy...
Code:
su
entro_on
Then pick your poison
Turn off entropy...
Code:
su
entro_off
Check available entropy levels type (YOU MUST HAVE ACTIVATED ENTROPY RESTORE BEFORE ATTEMPTING THIS)
Code:
su
entro
3.) Multiple VM, Kernel, and block modifications (Speed, No lag, Awesome battery life)
4.) Battery life increases by up to 75% (When using 'boost' binary every few hours)
Want to setup daily or hourly cleaning of partitions and clearing RAM? Simply type:
Code:
su
zealot
To turn of zealot simply type:
Code:
su
zealot_off
5.) Trim the fat off of /data /cache & /system
Code:
su
cleanup
This also runs on reboot so only do it if you haven't rebooted in a while.
6.) Calibrates your battery automatically and backup the old battery stats in case of calibration error (init.d script)
7.) Browser cache removed on each reboot and startup (init.d support)
8.) SuperSU is the REQUIRED Superuser application for Operation Killjoy™ (Fixes mounting issues)
9.) RAM booster binary (Recover lost ram on the go without rebooting)
Choose between light, moderate and aggressive ram boost...
Code:
su
boost
10.) Killjoy™ Binary (Exit_Only Exclusive) (Check to make sure mod installed correctly)
Type this command in Terminal Emulator:
Code:
su
killjoy
11.) CpuControl script that is 100% user tweaked via "cputuner" binary
To activate simply type in Terminal Emulator:
WARNING: If you are running ANY overclock apps then cputuner IS NOT for you!!!
Code:
su
cputuner
WARNING: If you are running ANY overclock apps then cputuner IS NOT for you!!!
12.) Zealot binary for timing of script execution (Choose hourly or daily script execution via my executive zealot binary)
Simply type in Terminal Emulator:
Code:
su
zealot
To turn zealot off simply type in Terminal Emulator:
Code:
su
zealot_off
13.) Set selinux status from ENFORCING to PERMISSIVE plus reboot survival.
Also sets default.prop from "0" or "1" and back again!
Simply type in Terminal Emulator:
Code:
su
selinux
ALL CHANGELOG INFO CAN NOW BE FOUND BY INSTALLING THE NEWEST VERSION OF OKJ AND TYPING
Code:
su
changelog
OFFICIAL RELEASE FOLDER
DISCONTINUED!!!
ABOUT EXPERIMENTAL RELEASES - These releases should be stable enough for daily use, may or may not contain errors.
EXPERIMENTAL RELEASE FOLDER | Check Daily/Nightly: (Not always everyday)
DISCONTINUED!!!
OPERATION KILLJOY HAS BEEN OFFICIALLY DISCONTINUED DUE TO HORRIBLE DOWNLOAD NUMBERS! I DO NOT ASK FOR DONATIONS SO THE DOWNLOAD COUNT WAS MY MOTIVATOR! OPERATION KILLJOY WAS ONLY DOWNLOADED 479 TIMES FROM 09/04/2015 AND 09/21/2015. IN 2013, OKJ WAS DOWNLOADED 1,500 TIMES DAILY! I WANTED TO COME BACK WITH A BANG BUT BECAUSE OF OTHER DEVELOPERS USING OPERATION KILLJOY FRAMEWORK AND STRUCTURE WHILE I WAS GONE FROM XDA, THEY ENDED UP WITH MY DOWNLOADS AND I COULD NOT RECOVER! I WAS THE LAST ACTUAL LINUX DEVELOPER WHO WAS RELEASING BLEEDING EDGE MODIFICATIONS! THAT IS NO LONGER THE CASE DUE TO THIS! GOOD LUCK TO EVERYONE!
How to uninstall killjoy!!!
1.) Open terminal emulator
2.) Type these commands
Code:
su
uninstall
3.) Reboot your device
4.) Killjoy is gone
Reserved!!!
First and dominating the world. One KillJoy at a time! great job EO
Sent from my SPH-L710 using Tapatalk 4
There might be some typos so let me know. Generally it is stable!!! Developers please read our new policy on using this.
Sent from my Direct Injected, Turbo charged SPH-L710 using TapaTalk BETA
Want to be direct injected? View my thread!!!
DL in progress
Sent from my Galaxy Nexus using xda app-developers app
You combined all of direct inject scripts on single script, So is this a new thing ?
Waiting for updates lol
Flashing will report bakc
drankn BL SMOOTHIEZ
Exit_Only said:
OPERATION KILLJOY™
Click to expand...
Click to collapse
Been using your package since the wee days where it was only for the E4GT It's good to see your project is now properly copyrighted and you'll be continuing to develop awesome tweak packages for us
If anyone is new to @Exit_Only's tweaks, trust me, you won't be disappointed
Battery life with my SPH-D710 E4GT with stock battery
Sent from my Direct Injected SPH-D710 running PACMan v23.0.0, JB 4.2.2.
Flashing right away!
Sent from my 6th phone.
Dreams don't work if you don't do them.
Testing! Way to go!:beer:
Sent from a well via Tapatalk from my LG-Optimus L7
I can't delete the zip from my SD card!
Sent from my GT-I5500 [CM7.2]
Definitely gonna test this out! Thanks Exit!
LuigiBull23 said:
Definitely gonna test this out! Thanks Exist!
Click to expand...
Click to collapse
Exit*
Sent from my SCH-I535 using Tapatalk 4
Thank you for your work. Flashing now.
Excellent work @Exit_Only, OP is looking top notch. It has been stellar working with you so far. Great things are going to be happening on this new project. Looking forward to the future from here, the initial release is great. Hit me up soon as your working on the next parts and we will discuss lots more. Welcome again to Team Kernelizers Exit_Only, let's give everyone something to talk about
Looking my man :good:
Yeah my ish flying
drankn BL SMOOTHIEZ
Looks great! Is there a way to uninstall?
SCH-I535 on SlimRom & KT747
Wi1son said:
Looks great! Is there a way to uninstall?
SCH-I535 on SlimRom & KT747
Click to expand...
Click to collapse
su
uninstall