I AM CURRENTLY WORKING ON A TOTAL REVAMP OF THIS TOOL, SO ANY VERSION IN OP IS A NON WORKING VERSION, BECAUSE SIMPLY THE SCRIPT REFUSES TO RUN IN RECOVERY MODE!
Disclaimer:
This mod is meant to be used in every single device that exists in the market in a worldwide basis despite providers and so on!
THIS MOD IS TO BE CONSIDERED A WIP aka Work In Progress!
Click to expand...
Click to collapse
AUTOMAGIC zInternal 2 zExternal Memory 2.2
The main purpose of this mod:
To all people out there that use our beautiful devices, there is a thing that i hate and that is: LIMITED MEMORY in our device!
Then i had the idea along with my coder and friend zeppelinrox to make a UNIVERSAL memory switcher and along with it being able to use the microSDXC cards of 64Gb as INTERNAL MEMORY!
Click to expand...
Click to collapse
What does this MOD do after all?
This mod switches the internal memory of your device with the external SDCard, and when your rom boots Android will "think" that your external SDCard is actually the internal memory and will use it to install data and so on!
Click to expand...
Click to collapse
Screenshots of this MOD working:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
2.2:(non-funcional):
zExternal2InternalCard_zwitcher_2.2_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.2_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.2_CWM-signed.zip
Click to expand...
Click to collapse
2.0(non-funcional):
zExternal2InternalCard_zwitcher_2.0_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.0_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.0_CWM-signed.zip
2.1(non-funcional):
zExternal2InternalCard_zwitcher_2.1_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.1_CWM-signed.zip
zExternal2InternalCard_zwitcher_2.1_CWM-signed.zip
Click to expand...
Click to collapse
This MOD it was tested in several devices as follows:
Samsung Galaxy S
Samsung Galaxy S2 (all brands)
Samsung Galaxy S3 (all brands)
Samsung Galaxy Note (all brands)
Samsung Galaxy Note II (all brands)
Samsung Galaxy Note 10.1
Samsung Galaxy Tab
Samsung Tab 2
Samsung Tab 10.1
Micromax A110
Sony Xperia Sola
Sony Xperia T
HTC Amaze 4G
Sony Xperia Go
Sony Xperia Miro
and many more that i don't remember right now!
it should be compatible with every device that exists in the market!
Click to expand...
Click to collapse
The base of this MOD came from an already posted mod which was considered to be NOT N00B FRIENDLY:
http://forum.xda-developers.com/showthread.php?t=1991583
FAQ's
Changelog's
ToDo's and improvements!
Credits:
zeppelinrox for being my coder and my sidekick! :highfive:
droidiser for the initial idea that he gave me and for the images!
And thanks to all community that helped me to learn how to make stuff by my own :victory:
FAQ:
1) Whoaaaaa my device is not supported because i get an error when i try to flash the mod via recovery... what now?
Go to: /system/etc and post your vold.fstab and we will make it work with your device!
2) Cool it works but i wanted to change it back to it's original form... how can i do so?
Just flash the zip again and it will reverse the changes!
Changelog:
1.0 alpha:
New: Initial idea for the script and i wrote a very simple script, but didn't do what i intended!
1.1 alpha
Fixed: Script was searching for the file in the wrong folder, without the right permissions!
Fixed: Permissions fixed and now searches for the right file in the right directory!
1.4 alpha
Fixed: Permissions (again lol)
New: Added error if script finds a non working file that can be modded!
1.6 beta
Fixed: Script works but was changing the mounting points to the wrong point of volume mounter inside Android
2.0 stable release!
New: Added feature to detect non working volume mounter in a non working device!
Fixed: Detected right mounting and if there are spaces or wrong lines only the right ones are detected and properly edited now!
2.1 stable
New: Capability of creating a binary on init.d so a developer can include this script in a ROM!
New: The script does now create a backup of the original vold.fstab!
New: Capability of in case of existence of backup, it restores to the original vold.fstab that comes with the ROM that you are using!
New: The script on init.d checks if the MOD was installed already and in case it was it won't change all the time you reboot your device, so the change is only done once you flash the zip
New: Possibility of running this MOD thru terminal with: su -c zwitcher
Fix: Typo in installation script where it was supposed to say 2.0 and it said 1.0 (ups)
2.2:
Major fix: Permissions correctly implemented in recovery to run the script!
To Do List:
Currently nothing but i will add new features because i have many changes in mind!
Ah... I was gonna say "FIRST!"
But I'll settle for...
FIFTH!
lol
Of course I'll be available for increasing compatibilty... because there is always stuff changing
Oh yeah, if users have a vold.conf file as well it may not work "as is".
In that case they should post both vold.fstab and vold.conf
Well i have edited the first topic to be a little bit more interesting and i hope people find it useful
Thanks a lot my friend :good:
Version 2.1 is OUT with many addictions and a little fix for a typo!
Changelog:
2.1 stable
New: Capability of creating a binary on init.d so a developer can include this script in a ROM!
New: The script does now create a backup of the original vold.fstab!
New: Capability of in case of existence of backup, it restores to the original vold.fstab that comes with the ROM that you are using!
New: The script on init.d checks if the MOD was installed already and in case it was it won't change all the time you reboot your device, so the change is only done once you flash the zip
New: Possibility of running this MOD thru terminal with: su -c zwitcher
Fix: Typo in installation script where it was supposed to say 2.0 and it said 1.0 (ups)
Well so far i tried to flash today the MOD that we were creating and came to the conclusion:
Lack of permissions to run the script thru recovery! (major UPS )
And i didn't made the correct command to run the script without errors!
Don't try to flash 2.1 and neither 2.0 because both builds are broken due to a lack of permissions to run the script in recovery!
Will fix ASAP! :good:
Errors happen and since we are humans and we make mistakes here is 2.2 release!
Changelog for 2.2:
Major fix: Permissions correctly implemented in recovery to run the script!
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.1]
I fashed u r mod on my neo v
No change after rebooting help needed
And I don't hve internal sd I only hve
Internel mem and external sd card
Sent from my MT11i using xda premium
praveenpgeb said:
I fashed u r mod on my neo v
No change after rebooting help needed
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Don't flash 2.2 because it's still broken!
A NEW VERSION IS BEING WORKED ON! :laugh:
Zep i've come to a conclusion and now i need your help because i need two things:
First of all i have discovered why the script was refused to run in recovery:
Not an edify script (DUH) so it needed to be run like this:
Code:
run_program("/sbin/busybox", "sh", "/tmp/mod_vold.fstab.sh");
But i need you to do two things for me that will be:
Making the main script to edit ONLY the vold.fstab
And the binary that goes on xbin and the init need to be different files, cannot be created from recovery!
So:
Script to edit vold.fstab with a temporary directory for example: /tmp_vold/
the binary already compiled to run from xbin
and init.d script!
Can you do it my good friend?
:good::highfive:
Before doing anything drastic, test with a blank line at the end of the script
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
zeppelinrox said:
Before doing anything drastic, test with a blank line at the end of the script
Click to expand...
Click to collapse
Will do
Sent from my GT-N7000 using Tapatalk 2
No changes on recovery :S
Can you do what i told you? Just edit the vold.fstab and the binary is a different file?
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
I have a Doubt. if the SD card becomes the internal storage then where will we store music and other stuff?
karan128 said:
I have a Doubt. if the SD card becomes the internal storage then where will we store music and other stuff?
Click to expand...
Click to collapse
Wherever you want?
This is just the memory for storage, doesn't affect the internal partitions!
I mean for example:
For Galaxy Note /system is and always will be: mmcblk0p9
And so on!
It only edits the mounter to switch the mounting of the partition of storage between: /sdcard and /external_sd
So when you access inside Android to a file manager
/external_sd is actually phisically speaking your internal memory (device memory)
And /sdcard is the SDCard (your microSD card)
got it?
It's just to improve the space to store the data for huge games like gameloft games
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
Does it really work on neo v
Sent from my MT11i using xda premium
praveenpgeb said:
Does it really work on neo v
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Running thru script manager yes, but currently we were trying to make it run in recovery mode to spare the user two reboots!
But tomorrow i will post a new version (ALL THE VERSIONS included in OP are BROKEN so flashing won't do nothing to your phone lol)
I will post a new version that is to be flashed via script manager with root and it will install a binary and in case you wanna undo or include this in your own rom all you have to do is pickup zwitch from /system/xbin and give it the proper permissions!
For now this script is useless LOL
Tomorrow i will post a totally revamped version because only using recovery for now it's impossible since i am currently working on it!
:good:
Re: [MOD][ALL DEVICES][WIP]AUTOMAGIC zInternal 2 zExternal Memory[CWM][2.2]
if I have 16gb SD card then will I get all of the 16gb as internal space?
Related
Welcome to my OTPA roms!
Version 1.2.x -> Base build is 1.79.482.3 146733
Version 1.4.x -> Base build is 2.73.405.38
Version 1.5.x -> Base build is a mix of 2.73.405.38 and Sense UI 4 Magic
Version 2.0.x -> Base build is a mix of 2.73.405.38, Sense UI 4 Magic, updated kernel, and etc
Version 3.0.x -> Base build is a mix of 2.73.405.38/3.03.990.6, Sense UI 4 Magic, updated kernel, and etc
Credit/Thanks goes to MLIGN, JAC, CC, Paul @ MoDaCo, Drizzy, QTek, Cyanogen, Haykuro, Twistedumbrella, DWang, bouyark, jabbawalkee, sardoid, others, and of course XDA itself.
The Beta Testers
bouyark
sardoid
jabbawalkee
djlman
Donators:
Bouyark
DJlman
PDL
WebghostDK
tfoteh
Requirements:
Format your sdcard with the following specs.
Fat32
ext2/3
linux-swap - At least 96mb
How to setup sdcards
How To Partition SD Card With Ubuntu
From the recovery mod
Manual partition of sdcard w/parted,goto ext3/4 from adb. no liveCD req'd
==================================
Then use the following command or your own.
Run the following command in the adb shell
# Backup your apps using the following commands.
mkdir /sdcard/backup
mkdir /sdcard/backup/app
mkdir /sdcard/backup/app-private
cp -R /system/sd/app/*.* /sdcard/backup/app
cp -R /system/sd/app-private/*.* /sdcard/backup/app-private
# Remove app_s files from system before starting the flashing process.
rm -r /system/sd/app_s/*.*
reboot recovery
Then a WIPE is required...!
These steps need to be performed before flashing this rom.
My otpi will do the same one you've already flashed this rom.
Disclaimer:
This rom is for "HTC Magic/MyTouch 3G/32B devices only.
Please make sure to make a nandroid backup before flashing this rom.
I am not responsible for bricked devices, dead sdcards, and etc.
Please do some research before trying to flash this rom.
Mods:
Added: Bluetooth fix
Moved to app: BizCardReader
Moved to app: HTC_IME
Moved to app: Maps
Moved to app: Quickoffice 1.0.1
Moved to app: teeter
Settings:
Default with Linux Swap set at 60 swappiness
If for some reason it does not set swappiness to 60, then please use swapper to adjust as needed.
Tips:
Create a folder called backup on your sdcard before flashing this rom.
Then another folder called app within the backup folder.
Copy your currenlty used apps into the app folder.
Once your done flashing this rom, connect your device and within adb shell, type otpr.
This will copy all files within your sdcard/backup/app onto /system/sd/app
Tools:
The following tools will be added to this rom, simply connect your system via adb shell and type names below.
otpi
This simple add-on script will backup your app to sdcard/backup/app, then remove all existing files from app_s and app.
Once completed it will reboot your device into recovery mode so that you can flash another rom.
otpm
This simple add-on script will simply mount your sd card with read + write options.
otpr
This simple add-on script will restore your save files from sd/backup/app to your /system/sd/app folder.
=======================================================================
Still working on fixing the following:
1. FC when searching contacts
2. Full Bluetooth support
============================
Version 1.5
OTPA.v.1.5.5 - Updates
This update will fix the miss call issues when present.
It also includes Java and a few addional apps.
It also fixes the sound issue.
There are two versions one with A2sd as with the current rom and one without A2sd.
Do not perform a wipe when using Updates.
If the swappiness drops from 60 to 10 after a reboot, please download swapper and adjust as needed. I will include swapper in the next update.
==========================================
OTPA.v.2.0 - Sense UI 4 Magic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Contents:
Bluetooth muisc still works
Faster
More Stable
Black Dialer -> Thanks to twisted for his help
Transparent Lockscreen -> Got bored waiting for a new phone...lol
Replaced kernel with drizzy's -> with some minor edits to the boot.img by me
Removed all warez
Hard coded swappiness to 60 -> Yes, it will stay at 60 after reboots. Do no use swapper on this version...!
Set cpu to 38400 instead of max to help reduce battery drain.
And other things I forgot about.
Wifi Fix - OTPA.v.2.0 - Magic Users Only and Not MyTouch
Do not perform a wipe when using Updates.
====================================
Version 3.0
New Rosie look
Black out theme
Back with old screen lock since people did not like the clear look..lol
Update apks and framework
Two different versions
One with BT Music (Music streaming only not full BT)
One without BT Music (Much smoother since it has the newer core, people search works...lol)
and etc
All roms moved to 4shared folder.
====================================
App Pack v.1.1
Roms Folder - 4shared
========================================
Enjoy,
Suggestions.
If I may:
- Add Plurk, including the widget.
- Render the notification tray transparent.
- Implement EXT4 support.
- Be sure that the Compcache modules are correct.
- Linux-swap supported AND/OR back_swap supported.
- Add Stocks, including the widget. (It's not that much of a resource hog.)
- Add Spare Parts.
- Keep all standard wallpapers to avoid gallery selection force closes.
- Keep all media to avoid "Ringdroid" or "Rings Extended" force closes.
- Keep the standard lock screen w/ throttle bar. (It's gorgeous.)
- Be sure that the latest kernel is the BFS-222 kernel. (Cyanogen's latest is.)
- (Opt.) Twisted's "black dialer."
- (Opt.) 2.73 based-build number. (Modaco's latest WWE dump.)
If you can make that happen before your release...or keeps your initial release HELD OFF...that's fine, trust me ---> it'll be worth it!
The community would be going nuts if you can make some of that happen!
Seriously, if you make at least half of that happen, I'll flash this ROM to both of my devices, and promote the hell outta' this.
Thanks.
EDIT: The reason for the Modaco dump suggestion is because he has the only build that DOES NOT force close while using the People Search function in the contacts. That's a big deal. IMO.
haha am i following you or the other way around. i Used your rom on my Wing, so i will be sure to check this one out.
TTran!!! Dude!! Your on sapph and dream roms now. You are my hero from herald forum!! I cant wait to see what happens with you toying with android!! Now lets go get Ivan lol!!
Be waiting for your upload
Ttran...
Great you here on andriod LOL. I used your rom for HTC Wing LOL..and i still have it..(too bad you retired from it) look foward in your work...
downloading now. About to install. Will report back shortly
vtecbros said:
downloading now. About to install. Will report back shortly
Click to expand...
Click to collapse
Thank you for the response,
Please remember that this is a full version so it might run a bit slower.
I'm running a strip down version of this rom and its working great so far.
E:Failure at line 3:
copy_dir PACKAGE:system System:
Installation aborted.
Tried twice...and still have this message??
x1tyme said:
E:Failure at line 3:
copy_dir PACKAGE:system System:
Installation aborted.
Tried twice...and still have this message??
Click to expand...
Click to collapse
That's strange, I've test it before uploading, the file must have gotten corrupted or something.
I'm going to download it and try again.
File is not available from megaupload...
nevermind, i guess you're uploading it again
Bro this thing is very fast. And as what you said its a full verison so it might be a bit slow. But i dont think its slow at all. I have a class 2 4gb. Its still fast! Getting my class 6 in 3 days
I did notice one thing, with JACHEROski builds the prediction on QWERTY mode prediction dont work. But that is not a problem to me i can just use better keyboard while this whole thing gets figured out why it wont work on texting mode only.
But hey other than that this ROM is go for.
Thanks.
x1tyme said:
E:Failure at line 3:
copy_dir PACKAGE:system System:
Installation aborted.
Tried twice...and still have this message??
Click to expand...
Click to collapse
I just flahed it again did not have any problem, but I've already started uploading it again so, please hang in there.
schtuka said:
File is not available from megaupload...
nevermind, i guess you're uploading it again
Click to expand...
Click to collapse
The upload has been completed.
Thank you for taking the time to try my rom out.
vtecbros said:
Bro this thing is very fast. And as what you said its a full verison so it might be a bit slow. But i dont think its slow at all. I have a class 2 4gb. Its still fast! Getting my class 6 in 3 days
I did notice one thing, with JACHEROski builds the prediction on QWERTY mode prediction dont work. But that is not a problem to me i can just use better keyboard while this whole thing gets figured out why it wont work on texting mode only.
But hey other than that this ROM is go for.
Thanks.
Click to expand...
Click to collapse
Thank you for your feedback.
Hey ttran001,
I seen that you had to re-upload the file.
The one you just re-upload were there any chance to it? There is 3mb less then the first one you uploaded?
vtecbros said:
Hey ttran001,
I seen that you had to re-upload the file.
The one you just re-upload were there any chance to it? There is 3mb less then the first one you uploaded?
Click to expand...
Click to collapse
Man, I'm starting to hate megaupload.
It should be the same file.
As for changes, I'm going to wait until tomorrow after folks have had time to download it and provide their feedback.
I personally like the other build I have of JaCs, but it looks as if people want MoDaCo rom.
ttran001 said:
Man, I'm starting to hate megaupload.
It should be the same file.
As for changes, I'm going to wait until tomorrow after folks have had time to download it and provide their feedback.
I personally like the other build I have of JaCs, but it looks as if people want MoDaCo rom.
Click to expand...
Click to collapse
Well The MoDaCo is running smooth right now. But maybe you can make a build with JaCs and then just upload for testing.
idk?
ttran001 said:
I just flahed it again did not have any problem, but I've already started uploading it again so, please hang in there.
Click to expand...
Click to collapse
I tried to dl it..(even switch memory card) still have the same message???
ttran001 when will you be releasing the Lite verison?
later today?
Hi there!
I made some changes to the samsung stock firmware and i want to share it with you.
I take no responsabilty if your phone explodes or brick!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to: My cedar tree for logo
New Version 3.0 now available in two version!
Features of radioactive tree version (heavy modded):
- Custom bootanimation
- Modded Dialer and Wood Radio!
- JPM Framework (next week i will upload a radioactive with jpq frameworks)
- Perfomance upgrades of stock version
Features of stock version:
-I5800XXJPQ Base the stablest rom ever
-JPQ stock frameworks, faster phone
-JIT enabled
-Odexed for faster apps
-App2SD v2 so no more Link2SD. Many people wanted it
-Maybe new special scripts....
- Fixed lag, multitasking freeze, market installations...
Stay tuned...
CyanoBrozzu is a very fast rom (not the fastest ) Here some of cool functions of this rom:
- I5800XWJPF base = VERY FAST!
- Base ROM will be updated everytime a new stable firmware is released(stable=working)
- 5 LockScreen Mod
- JPM themes and framework support! If phone crashes first time just wait another start and it will work (tested by me with Darkfroyo theme)
- Bash shell
- Jit enabled
- Remount script (just type remount to mount /system rw )
- Prerooted
- Deodexed
- ALL STOCK APPS!!!!
- Htc Themed (Theme by The Dark Lestat)
- Busybox
- Good 2d and 3d graphics performance (Angry Birds works well except some textures, Fruit Ninja is a little bit slow)
- Live Wallpapers
- 25 MB free in /system (I5800XWJPF has no Samsung Apps, if you want it click on Samsung Apps icon and it will download the apk from Samsung site, it's a Samsung decision)
- Extended Power Menu
- NO a2sd! Link2SD (more stable)
v2.0 Final NOW AVAILABLE!!!
-Almost fixed lags after apps installation. I've tried to install shazam while listening to music with stock music player and it lagged just for 3 second after installation.
-Altered minfree settings.
-Fast Reboot (free version) included to completely fix all lags after installation!
-Automatic framework changer. Type theme_changer in terminal to replace framework-res and twframework-res from sdcard (tested with adb and Terminal Emulator)
- Two version: one stock themed (no extended power menu and lockscreen mod), one HTC themed both with JPM frameworks support!
- New scripts: theme_changer (type this in terminal to move framework-res and twframework-res from sdcard to /system/framework), dump (dump your factoryfs.rfs by typing dump )
v2.0 Beta NOW AVAILABLE:
-JIT Enabled
-FuguTweaks
-CWM Recovery
-Modded FMRadio Theme by me. Now is wood style
-ADW Mod Sense Launcher included. More fast than TouchWiz. TouchWiz is still included
-No More a2sd. Replaced with Link2SD. More Space used but more performance (If you want a2sd i will post a tutorial or an alternative version)
-No Wipe update!
-Sense Launcher included. More Stable than TouchWiz launcher.
-Fugumod kernel 2.4 beta3
-Other performance optimizations...
-other ideas... just ask in posts and i'll see what i can do... NO OC posts please
Some Screenshots
Download:
CyanoBrozzu v3.0 radioactive tree ----> Part1 Part2
CyanoBrozzu v3.0 stock version ----> Part1 Part2
CyanoBrozzu v2.0 Final Stock XWJPF frameworks ----> Part1 Part2
CyanoBrozzu v2.0 Final Stock ----> Part1 Part2
CyanoBrozzu v2.0 Final HTC theme ----> Part1 Part2
CyanoBrozzu V2.0 ----> Part1 Part2
CyanoBrozzu V1.0 ----> http://www.megaupload.com/?d=SC2QQMEJ
Issues:
-After changing framework-res the phone will crash first time just reboot or wait for second boot
-Boot will take longer with a2sd enabled
-If an app force gets closed after backup remove data and try to open the app again. Now try restoring backup again
-When an app force closes will vibrate three times. It's a minor bug if an app force closes it's an app fault
Scroll down second post for Flash instructions... & various tutorials
Tips:
- If you want a faster phone don't use link2sd or data2sd and leave all apps on internal memory
- For a faster boot use stock version (Available in hours)
- If you don't want to reboot use Fast Reboot regularly
- Don't leave too much app active and terminate useless apps
- Clean Level 2 RAM regularly
HOW-TO Install 2.0:
1. Extract the RAR file in a folder
2. Open odin in flashing tools folder
3. Click on OPS button and select apollo_0531.ops in Flashing_Tools folder (the same folder of odin)
4. Tick One Package
5. Click One Package button and select OnePackage.tar
6. Poweroff your phone
7. Press Home+VolDown+Power and wait 10 sec~ till you see Downloading... screen
8. Now connect the phone through USB cable
9. When Odin detects phone press Start
10. Now wait 7 minutes~ and phone will boot up
Note: If you have problem after upgrading to CyanoBrozzu 2.0 from another rom I suggest you to do a wipe/factory reset from recovery (Home+MiddleVolume+Power)
HOW-TO Link2sd v2.0:
1. Do the step 3.1 of this guide http://forum.xda-developers.com/showthread.php?t=999856
2. Reboot phone with sdcard in
3. Open Link2SD and link interested apps
4. Open Settings and enable Auto-Link
Link2sd and Titanium Restore:
After enabling AutoLink restore ONLY USER APPS and restore just important system settings or telephone memory will be full.
Bootloops fix (for I5801 & I5800, quote from fourth page)
bootloop after flashing this rom.tried data/cache wipe too.....still cant boot .....
Sent from my GT-I5801 using Tapatalk
Click to expand...
Click to collapse
Ouch! Maybe it could be an issue with i5801 phones. But you cant try this:
1. Flash I5800XXJPF. (i suggest you the version without bootloader)
2. Flash CyanoBrozzu v2
3. After flash in GT-i5801 screen press HOME+MiddleVol+POWER wait for reboot and release keys.
4. When you enter in recovery wipe data and cache
5. Reboot
6. Now it should work (The first boot can take up to 7 minutes just wait)
If you think you are in bootloop try this.
1. Poweroff phone
2. Connect it via usb cable
3. Turn on phone
4. Wait for bootanimation
5. With adb open a shell and type dmesg
6. if a message like modem_ioctl arg=2 appaer you're not in bootloop just wait.
Click to expand...
Click to collapse
thanks.....reverted back to ddjg6 then to --->XWJPF-->your ROM
had to wipe data n cache to boot sucessfully...
Click to expand...
Click to collapse
HOW-TO Change theme (v2.0 final only!):
1. Download framework-res.apk and twframework-res.apk JPM compatible!
2. Move them to sdcard
3. In Terminal emulator or adb type theme_changer (in terminal emulator remember to type su!)
4. Phone will freeze and autoreboot
5. Boot will take longer be cool
6. Your theme is now installed!
I tested this procedure with some themes from here http://forum.xda-developers.com/showthread.php?t=1035775
HOW-TO Install 1.0:
NOTE!!!: ALL YOUR DATA WILL BE DELETED MAKE A BACKUP FIRST!
1. Extract the RAR file in a folder
2. Open odin in flashing tools folder
3. Click on OPS button and select apollo_0531.ops in Flashing_Tools folder (the same folder of odin)
4. Tick One Package
5. Click One Package button and select OnePackage.tar
6. Poweroff your phone
7. Press Home+VolDown+Power and wait 10 sec~ till you see Downloading... screen
8. Now connect the phone through USB cable
9. When Odin detects phone press Start
10. Wait 7 minutes~ and your phone will boot up
11. Now go Settings>Privacy>Factory Reset (IMPORTANT)
12. Wait 7 minutes~ and CyanoBrozzu is now installed!
How To data2sd (v1.0):
1. Do the step 3.1 of this guide http://forum.xda-developers.com/showthread.php?t=999856
2. Reboot phone with sdcard in
3. Data2SD is now enabled
NOTE: NEVER REMOVE SDCARD WHEN PHONE IS ON
Happy Flashing!
nice one...so finally someone releasing a XWJPF based ROM...many people wanted it...all the best for your ROM
Good work! I like the idea of stock rom, only with performance upgrades. I would try it but i flashed yesterday so i dont have the nerves. Keep up the good work!
What about cwm recovery?
Sent from my GT-I5800 using XDA Premium App
:-D i read the topic as cyanogen mod and i was stunned :-D stupid me
Sent from my GT-I5800 using XDA App
jazux said:
:-D i read the topic as cyanogen mod and i was stunned :-D stupid me
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
at first even i thought so
the remount script is a very nice idea, i like it
deox91 said:
the remount script is a very nice idea, i like it
Click to expand...
Click to collapse
i'm interested about it too
jazux said:
:-D i read the topic as cyanogen mod and i was stunned :-D stupid me
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
i realized only after reading ur comment and checked back
nice one...so finally someone releasing a XWJPF based ROM...many people wanted it...all the best for your ROM
Click to expand...
Click to collapse
Thanks! I will try to update the base ROM every time a new working firmware will be released.
What about cwm recovery?
Click to expand...
Click to collapse
For now i will try not to add things that can confuse noobs (OC etc...) and can hard brick phone (i experienced the problem )
The remount script is very convenient i use it always!
superfrancy97 said:
Thanks! I will try to update the base ROM every time a new working firmware will be released.
For now i will try not to add things that can confuse noobs (OC etc...) and can hard brick phone (i experienced the problem )
The remount script is very convenient i use it always!
Click to expand...
Click to collapse
you have hard bricked your phone with cwm?
No i didn't! And i know that CWM won't hard brick the phone but for now i don't want do add CWM recovery. Maybe in 2.0 or 2.1...
superfrancy97 said:
No i didn't! And i now that CWM won't hard brick the phone but for now i don't want do add CWM recovery. Maybe in 2.0 or 2.1...
Click to expand...
Click to collapse
ok, thats cool
Are you sure that just flashing over will delete our data? I had a softbrick the other day and just flashed XWJPF without any loss. Just had to root and enable some modes I had.
I put a datafs.rfs in One Package file to auto-wipe and avoid problems but if you flashed succesfully under JPM i can try to create a no wipe version.
deox91 said:
- Remount script (just type remount to mount /system rw )
Click to expand...
Click to collapse
how does it work?via init.d?
dxdiag32 said:
how does it work?via init.d?
Click to expand...
Click to collapse
its a file which contains the remount code
Code:
mount -o remount,rw /dev/block/stl6 /system
and is placed in /system/bin/ ; chmodded 755 that you can run it
if you have named the file "remount" then you only have to enter "remount" in the terminal emulator or via adb shell... if you have named the file "a" you have to enter "a" and so on..
its a file which contains the remount code
Code:
mount -o remount,rw /dev/block/stl6 /system
and is placed in /system/bin/ ; chmodded 755 that you can run it
if you have named the file "remount" then you only have to enter "remount" in the terminal emulator or via adb shell... if you have named the file "a" you have to enter "a" and so on..
Click to expand...
Click to collapse
Yes it is you thinked a different thing?
superfrancy97 said:
Yes it is you thinked a different thing?
Click to expand...
Click to collapse
no i thought exactly that
dxdiag32 asked how it works and i explained it to him
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
an AROMA based Touch UI Recovery Installer
As seen on Valhalla Black Edition and Team Acid AOKP
Please tell me if you're going to use this in your ROMs just so I know who is using it . Thank you.
This is for ROM chefs only, not for regular users. Regular users, you will see this in all your ROMs soon .
All the instructions below refer to the files in META-INF/com/google/android
You can change the splash image by replacing aroma/splash.png (make sure it's a PNG though)
As mentioned in the installation instructions, make sure your ROM's zip file matches that of Valhalla Black Final's for best results.
Full touch screen support
Allows for a typical install, using default settings
Allows the user to customize the ROM installation
Allows the chef to customize the user experience
Support for different themes/skins
Installs Busybox
Installs kernel if you desire
Installs modem if you desire
No need to check mounts, the installer properly mounts the partitions for you.
No need to format partitions, the installer can wipe them for you.
Download and extract the installer zip file
Edit aroma/installer.default.prop to set your ROM's information
Rename installer.default.prop to installer.prop
Edit aroma-config and updater-script to your liking
Extract your current ROM's zip
Delete your ROM's META-INF folder
Put the new SGS4G CWM Rom Installer's META-INF and tools folders in your ROM's root
Make sure your ROM's file structure matches that of AOKP Unofficial by TeamAcid, unless you know what you're doing
Create a new zip file
Flash away and test!
If you use this tool you have to link back to this thread and give me credit using the link. Example:
My ROM uses the SGS4G ROM Installer by FBis251
http://forum.xda-developers.com/showthread.php?t=1481228
installer.zip
Installer on GitHub
You can download installer.zip from the link above to get the latest version of the installer files to package into your own rom.
Octoboer 13, 2012
Remove touchscreen calibration fix /data extract bug
-- With aroma 2.55+ touchscreen calibration is no longer necessary
-- /data packages should get extracted properly after a /data restore
Updated to latest AROMA binary (2.56)
-- Much more stable binary in ICS recovery!
---- The newest binary hasn't crashed on me yet during testing unlike the older version (2.50) that was included in the last version of the SGS4G Installer.
Here is the AROMA changelog since the last version included in the SGS4G Installer
EDELWEIS - 2.56 - BUILD 121004-031
Fix capacitive button
Remove calibration tools
EDELWEIS - 2.55 - BUILD 121003-030
Completely new Input/Touchscreen Handler - Thanks to agrabren from TWRP
Remove all calibration need. calibtool(), calibrate() and calibrate_matrix() won't do anything now.
EDELWEIS - 2.51 - BUILD 120810-026
Supported Galaxy Nexus Touch Screen - And maybe other devices now supported
Click to expand...
Click to collapse
July 18, 2012
ICS public release
May 25, 2012
Fixed bug that wouldn't mount partitions
-- Added support for mounting /efs
Added /efs partition info to installer.default.prop
Fixed a bug that would cause redbend_ua to restart the phone while flashing
-- (Thanks to itzik2sh from xda-developers for the fix)
Updated efs-backup
Now only checks whether /efs is empty
-- Will be compatible with devices that don't use an nv_data.bin
May 23, 2012
Updated scripts for easier porting
-- aroma-config and updater-script now uses information from installer.prop
-- porting to new devices will now be a lot easier because of this
Updated efs-backup script
--Backups now only take up ~560kB of space, compared to 6.3mB before!
Added colors to the installation confirmation screen
May 2, 2012
Changed to using installer.prop file for controlling all the variables
-- Chefs no longer need to edit the main AROMA script
-- AROMA checks if the installer.prop file exists to prevent users who flash the zip from messing up their phones
Added an installation option confirmation screen to make sure users know what options were selected
April 15, 2012
Updated to aroma-2.00-120414-A7
Now checking for phone version using a kernel check. Should prevent Froyo users from installing a GB ROM
Fixed a bug that would always do a free space check even when the user didn't try to do a /data backup
Now doing a /data restore before the kernel flash. Some ROMs caused the phone to reboot once the kernel flashed which means the /data restore never happened.
March 11, 2012
Updated AROMA binary to 2.0a4
Changed busybox version back to busybox v1.19.0.git
Now using aroma's TrueType font support
-- Installer uses the rom's default font (DroidSans)
Updated ROM information screen
Reboot prompt moved to the end of the installation
Updated Agreement to add formatting
Added efs-backup script which makes a backup of the efs partition
-- Saved under /sdcard/aroma-backup
Now has UTF-8 and RTL support!
March 3, 2012
Forced installation of busybox
Updated busybox to bonsai's version v1.17.1 (2010-08-12 23:44:34 CDT)
Fixed a bug that wouldn't allow the data backup and restore scripts to run
Moved mke2fs.conf to tools directory
Updated the sdcard free space check for /data backup
-- Will now only warn users when they selected the backup option in customized installs
March 3, 2012
Cleaned up a lot of the aroma-config code for easier reading
Deleted duplicate busybox binary
Deleted changelog.txt since no one used it
Added .gitignore
Updated busybox binary to version 1.19.4
Added monospace font
Now using the latest aroma nightly Version 1.62 build 120303-030
Using the latest themes from the nightly
Added a check to disallow /data backup when there isn't enough free sdcard space
-- Added a warning for the user to know the backup isn't going to happen
Updated touchscreen calibration values
Now displays filesystem and ROM information on the same screen
-- Added sdcard filesystem information
Reboot no longer done in the updater-script
Changed symlinks in updater-script to use busybox for more functions
Feb 12, 2012
Added aroma theme support. Check aroma/themes/
Added three themes, sense, MIUI and ICS (default ICS)
Added MIUI icons
Added filesystem (disk free/total and percentage used) information viewbox
Added ext4 format from bonsai's installer script.
-- Now does a full ext4 format and tuning before the install
Now allows choice of splash animation instead of static splash screen
Removed a lot of whitespace from aroma-config
Removed options to do wipes since the format takes care of this
Added data backup option
Now using bonsai backup. Left compression enabled for minimal sd storage usage.
Backup may take up to 10 minutes to complete!
Removed color.prop (no longer needed due to themes)
Changed checking for SGH-T959V to allow you to continue in case there is no ROM installed.
Feb 5, 2012
Edited updater script to output all installer options to one prop file
Now using variables in aroma-config for easier writing of the final options.prop file
Cleaned up updater-script to only use one .prop file
Fixed a bug that would make the wipe /data dialog come up even when deselected in the customized install
The script will now ask the user if they want to reboot their phones in all instances before the install gets going.
Now using Roboto font
Added color.prop file to control theme colors
Updated the wording on the install type chooser
Click to expand...
Click to collapse
FB
I was just gonna thank you for this over on Black thread. Glad you got this out for folks. Slick very slick. Who needs ROM manager(mangler) when you're around. So thanks to you and everyone else who worked on it.
I just used this a few hours ago I installed the black final rom with touch screen features is cool!
Sent from my SGH-T959V using XDA Premium App
FB, I will be using it for the next edition of AOSP Style coming out soon. I have already built mos of the rom and its installer, but I needed verification.
airfluip1 said:
FB, I will be using it for the next edition of AOSP Style coming out soon. I have already built mos of the rom and its installer, but I needed verification.
Click to expand...
Click to collapse
Sounds good. Just follow the OP if you'd like. I'm sure you already looked through the scripts. You should theme the installer to make it look like your ROM .
airflip if u are using my rom as a base its already in there .... which u asked me to use so.....
FB, I just flashed Raver's final and everything flashed fine then when the installer was done it showed an error having to do with not finding a path for something. I was going to re do it and copy the error down but now the phone is stuck at the T-Mo screen and it won't go into recovery with the button combo. I'm going to Odin it in the morning and re-flash and see if it throws the error again and I'll let you know.
bswann said:
FB, I just flashed Raver's final and everything flashed fine then when the installer was done it showed an error having to do with not finding a path for something. I was going to re do it and copy the error down but now the phone is stuck at the T-Mo screen and it won't go into recovery with the button combo. I'm going to Odin it in the morning and re-flash and see if it throws the error again and I'll let you know.
Click to expand...
Click to collapse
Same error on my sgs4g I think it was a temp file error, didn't affect my rom booting though.
Sent from my Glacier using xda premium
bswann said:
FB, I just flashed Raver's final and everything flashed fine then when the installer was done it showed an error having to do with not finding a path for something. I was going to re do it and copy the error down but now the phone is stuck at the T-Mo screen and it won't go into recovery with the button combo. I'm going to Odin it in the morning and re-flash and see if it throws the error again and I'll let you know.
Click to expand...
Click to collapse
If it happens again, hit save log and send that to me. I'd really like to see it.
Gr8 job FB - thank you very much.
We'll probably also use it in our next version
10x
Thanks Guys!!!(Raver,FB)
FBis251 said:
If it happens again, hit save log and send that to me. I'd really like to see it.
Click to expand...
Click to collapse
FB, awesome work man. Lovin it. I had an error on my install but the ROM installed fine and booted fine. I made a log anyway so I could send it to you. Maybe it can be of some use.
alon2 said:
Gr8 job FB - thank you very much.
We'll probably also use it in our next version
10x
Click to expand...
Click to collapse
Awesome, don't forget to post here if you have any usage questions. I wound up taking out a lot of the comments for space, but I learned the syntax of the AROMA functions pretty well.
putsometrebleinit said:
FB, awesome work man. Lovin it. I had an error on my install but the ROM installed fine and booted fine. I made a log anyway so I could send it to you. Maybe it can be of some use.
Click to expand...
Click to collapse
Yes I'd love to see that.
airfluip1 said:
Thanks Guys!!!(Raver,FB)
Click to expand...
Click to collapse
No problem. I'm guessing it's working fine?
Cool very very neat. Never seen this on a phone before
Sent from my SGH-T959V using xda premium
FBis251 said:
Awesome, don't forget to post here if you have any usage questions. I wound up taking out a lot of the comments for space, but I learned the syntax of the AROMA functions pretty well.
Yes I'd love to see that.
No problem. I'm guessing it's working fine?
Click to expand...
Click to collapse
You are right. I am making this installer so customizable, from kernel to bootanimation.
airfluip1 said:
You are right. I am making this installer so customizable, from kernel to bootanimation.
Click to expand...
Click to collapse
I'm gonna release an update soon. You should look into it once I'm done since I simplified the updater-script portion of it.
What do you mean by "soon" because i may release 4.0 tomorrow. I just need to test my new features.
I'm doing final testing of the installer so in about an hour.
Feb 5, 2012
Edited updater script to output all installer options to one prop file
Now using variables in aroma-config for easier writing of the final options.prop file
Cleaned up updater-script to only use one .prop file
Fixed a bug that would make the wipe /data dialog come up even when deselected in the customized install
The script will now ask the user if they want to reboot their phones in all instances before the install gets going.
Now using Roboto font
Added color.prop file to control theme colors
Updated the wording on the install type chooser
Panicking right now because I can't seem to PM you FB.
I hope I don't come off as a stickler for details, but there's just a single typo in what is the 6th screenshot posted in the OP. It's for the option where you can choose to Wipe Data.
"...another ROM. Don't select if you want to keep your ap"
I'm assuming it was supposed to say "apps."
Just wanted to make note of it as I saw that Raver updated the contents in the aroma folder within the META-INF directory for his Valhalla Black rom. I was just thinking the typo might've been updated or something somehow.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With this tool, you can completely backup your device without root or unlocked bootloader.
I have tested it so far only with my Galaxy Nexus, but it should also work with other devices running Android 4.0+.
So you can unlock your bootloader without losing your data.
With version 1.1, not all parts of the program will be downloaded, only the necessary.
The most tools in the "Tools" section are for the Galaxy Nexus, but more devices will follow soon.
Now the final release of v2 is out!
The UI is complete, it's much easier to use.
Screenshots
Tutorial (thanks to AndyCr15)
http://www.youtube.com/watch?v=Xa0vnq_ce-M
If you use v1.2.2 you don't need to copy the UBT to platform-tools.
It would be nice if someone would do a tutorial for v2
German Tutorial:*click*
Download
Windows
Ultimate Backup Tool v1
Ultimate Backup Tool v1.1
Ultimate Backup Tool v1.2
Ultimate Backup Tool v1.2.1
Ultimate Backup Tool v1.2.2
Ultimate Backup Tool v1.3
Ultimate Backup Tool v1.3.1
Ultimate Backup Tool v1.3.2
mod edit: Using pay per click links is against XDA rule 13
3. Advertising and Income Generation
Commercial advertising, advertising referral links, pay-per-click links and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.
Click to expand...
Click to collapse
Mirror link (not always up to date; thanks to chip.de)
ROM Backup Digital Cryptor
Mac OS / Linux
Ultimate Backup Tool v1 (thanks to eyrienne)
mod edit" more pay per click links
Source
UBT
ROM Backup Digital Cryptor(Alpha, post bugs below; big thanks to Marijuana Legal/Marijsoft )
Changelog
v1
Initial release
v1.1
Added download feature
Changeable path for backup
Added "Tools" section
ADB preloads
Added pauses
Added ADB and fastboot check
changed Window size
returning to .bat because some virus scanners have indentified it as malware
v1.2
Path will now be saved
fixed problem with preloading ADB
added version number
added Option to backup a single app
added CWM for GS2 and GS3
fixed Option 2 to install CWM to Verizon
v1.2.1
hopefully fixed the bug with backup functions
v1.2.2
changed window size
spelling mistake corrected
advanced ADB and fastboot check (thanks to 2uk3y)
some UI adjustments (thanks to 2uk3y)
recognizes if it runs on x64 or x86
v1.3
full S2 and S3 support
german translation (thanks to TheMaurice)
added device and version check
added notification if backup has been finished
added device informations
added "Incorrect input" notification to all menus
added pop-ups
v1.3.1
fixed a bug with pop-ups
added pop-ups for backups of a single app
fixed a bug with path of backup of a single app
v1.3.2
option to capture a problem
added package list
added Galaxy Note support
ADB updated
Fastboot updated
v2.0
Added rootmethod for Samsung Galaxy S4
Added option to flash zip
Added rootmethod for many devices (Doom4lord4Root)
Updated option to block ads
Added cloudservice box
Added form to report bug in programm
Updated gpubli (google ads)
Add image to cloud (experimental) (save your photo sdcard cloudservice picasa or flikr - only donation***ImageToCloud) in this version zip file folder image and uploading to google drive
Added CloudManager to add upload to your cloud with a application you get if you donate
Added donationbutton (Marijuana Legal don't have a job, he's so sorry)
Fixed language(English language is default)
Fixed update search and download
Fixed Backup/restore list single app
Known problems
Problems with the HTC One series
Problems with Sony devices from 2011
When you have a problem make sure you have correctly installed drivers.
Donations
Nobody has donated so far, be the first
Our little team
Gigadroid (Scripting)
Marijuana Legal (GUI for Windows and Mac)
Well...tried this on my GF's Droid Razr Maxx but all it did was display the adb.exe help text and then re-start. Does this util require an ADB connection? Or maybe anything else? I'm thinking some more info would be helpful...
Great idea, though -- I really hope it works.
Sent from my halfway-decent Acer A100 running WDS's JB with godmachine's kernel v1.3a cranked up to a sweet "battery life is for chumps" 1.5GHz using xda premium...like a boss!
I have fixed the problem.
The compiler has built crap.
And yes, it requires a ADB connection
I would like to see your source on this, is it possible to create a git?
Sent from my Galaxy Nexus using Tapatalk 2
It's just a .bat file.
Here is the code:
http://pastebin.com/pCHm38Ry
Gigadroid said:
It's just a .bat file.
Here is the code:
http://pastebin.com/pCHm38Ry
Click to expand...
Click to collapse
Thank you
Maybe post it in the first post, as I am not the only one who will want to see the source on a developers forum
does NOT work on sprint's galaxy s III running CM10
A simple gift for this wonderful promising tool...
Since this uses ADB, if adb.exe is not found, it would not give any error/information to the user, of what is happening. It will just exit to the menu. Thus, I have added some ADB detection in the script here. http://pastebin.com/mFXJ3w36
PS: If @Gigadroid would put this up on github, more expansion and contribution is expected.
hai Gigadroid,
can u explain more about each option? coz i a little bit confuse about option 3,4 and 5.
if i need to backup game apps and data saved, which one should i choice ?
sorry for my English.
TQ
UI for your tool
Where can I contribute a simple Windows WinForms based UI for your tool? I am envisioning a save folder for backups, a file selection for restore. Backup name with date and time in file name if so desired, custom file name, ADB existense check, all garnished with explanative messages and an interminent progress bar so as to not block the UI while performing backup or restore.
BTW I just tried it on my SGS2 a day I after I rooted it for backups and it work fine
Now if I could only see how in ADB a package list can be retrieved with friendly names (Don't tell me... let me learn alone)
Does it work with<strikethrough> ICS 4.0.3(galaxy S2)</strikethrough> or even Gingerbread 2.3.6 (Galaxy Y) ?
I got this on galaxy S2
tapatalk سے لکھا گیا
drraptor said:
I got this on galaxy S2View attachment 1285550
tapatalk سے لکھا گیا
Click to expand...
Click to collapse
it's was an old issue with screenadjuster, just disable it. and tap back up my data.
What option to use to Backup everything like in a Nandroid?
bonell said:
What option to use to Backup everything like in a Nandroid?
Click to expand...
Click to collapse
It's data backupper, I think
jaguaralani said:
A simple gift for this wonderful promising tool...
Click to expand...
Click to collapse
Thank you, I will try to include it in the next version.
I have big plans.
It will not only be a backup tool.
ameer1234567890 said:
Since this uses ADB, if adb.exe is not found, it would not give any error/information to the user, of what is happening. It will just exit to the menu. Thus, I have added some ADB detection in the script here. http://pastebin.com/mFXJ3w36
PS: If @Gigadroid would put this up on github, more expansion and contribution is expected.
Click to expand...
Click to collapse
I will also include it in the next version.
Then I will put it up to github.
2uk3y said:
hai Gigadroid,
can u explain more about each option? coz i a little bit confuse about option 3,4 and 5.
if i need to backup game apps and data saved, which one should i choice ?
sorry for my English.
TQ
Click to expand...
Click to collapse
Option 3 is for backup device and app data.
That means when you restore you have only the system apps on your device.
The data of your apps is still present.
If you've done a mission in Dead trigger and install the app again, you're where you left off.
Option 4 is for backup your apps without data.
When you restore you aren't where you left off.
Option 5 is for backup music, pics, etc. hat are saved on your device
I would say you should choose 3 and 4, but with 1 you can do nothing wrong
AlbertoBN said:
Where can I contribute a simple Windows WinForms based UI for your tool? I am envisioning a save folder for backups, a file selection for restore. Backup name with date and time in file name if so desired, custom file name, ADB existense check, all garnished with explanative messages and an interminent progress bar so as to not block the UI while performing backup or restore.
BTW I just tried it on my SGS2 a day I after I rooted it for backups and it work fine
Now if I could only see how in ADB a package list can be retrieved with friendly names (Don't tell me... let me learn alone)
Click to expand...
Click to collapse
I had the same idea for a future release.
Maybe we can work together.
Send me a PM.
drraptor said:
Does it work with<strikethrough> ICS 4.0.3(galaxy S2)</strikethrough> or even Gingerbread 2.3.6 (Galaxy Y) ?
Click to expand...
Click to collapse
Please read the first post. :/
Does not work on stock ROM in Sprint Epic 4G Touch (SPH-D710) "adb: unable to connect for backup" every other adb functions work.
Nice script nonetheless.
bonell said:
What option to use to Backup everything like in a Nandroid?
Click to expand...
Click to collapse
You can't compare this tool with a Nandroid backup.
Option 2 is the closest Option.
Is there a restore data ONLY button for a specific app?
EDIFY CODE FOR ANDROID KITCHEN WITH CORRECT MOUNTING POINTS
So this is our newly created (by me) edify code file specific for our device...
Tested on Raw firmware and now the updater script has correct mounting points...:fingers-crossed::fingers-crossed:
Replace this file in cygwin/home/kitchen/tools/edify_defs folder
File name is delos3geur which has all mounting points and system path and file system formats...specific for our device
If you dont have this file in that directery to replace then just add it to the folder
Now cook roms (anybody) with this in their kitchen..modify and add scripts, theme etc...
http://www.4shared.com/file/VjtKxCcl/delos3geur.html
INIT.D FOLDER SUPPORT
OK GUYS here i present you the method to install init.d folder support without a custom kernel so that we can use any scripts or app2sd etc...
IT WORKED AND TESTED IN MY DEVICE :highfive::highfive::highfive:
Requirements:
#1 You must be rooted
#2 You must have busybox intalled
#3 ADB driver installed in your pc
Procedure to install:
- Download 'Busy Box" and install from playstore {select /system/xbin/
- Download attached 'DOC_INIT.D.zip' file and extract it to your pc {in to C:/} {dont extract in any folder}
- Now run 'runme.bat' file
- Grant permission in phone to ADB Shell then rest it will do by default {Dont Do Anything Else}
- your phone will show the process on screen
After installation complete terminal shows 'All Done' press any key to continue
Check for init.d folder in Root/etc/init.d
How to confirm its working?
Reboot after install
Check u will see root/data/local/temp/init.d_log_text.txt
Open the file in text viewer it will show 'done'
Now you successsfully installed init.d folder
Now its time to test all the scripts available in XDA...
Finally you guys also check the scripts....download Script manager app - put the script file in that init.d folder - select the script through smanager
Screen shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installing busybox
Showing init.d folder in place
Confirmation that it's installed correctly
Confirmation that it's working
Please press thanks button if i helped u
Scripts All are Working for Quattro
| SCRIPT | Supremacy Trilogy
Trilogy Features::
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
HOW TO:
Install:
1. Boot into CWM
2. Wipe dalvik cache
3. Flash zip
4. Reboot
Uninstall:
Didn't work out for you? lag? Freezing?
Flash the uninstaller in the attachments.
Thanks:
EMWNO for this script
Adrenaline™ Boost
Description
This script act like an nitro boost for your Android.
It helps you to clear your system cache, get more free ram for you and gravely boost your phone's performance !
*Best use before gaming !
How it works?
Your phone's ram usage will get higher and higher everyday then you will find your ace become an @SS because it's turtle speed and only reboot fix this problem.
Our android os create system cache everyday, but after one day or so, those old caches are not longer in use but the os continuously create newer cache that's why the ram get heavier and heavier everyday !
Adrenaline Boost help you to clear those caches ! So you won't have to reboot again !
For those who have sharp eyes may find your battery life decreased. WHY?
Adrenaline Boost clear your system cache and your cpu will work harder to build back needed cache.
Some have reported to me that the Opera browser crash after boost when open over 3 tabs.
You system need caches to work , this boost is intended to clear old cache that are no longer using and let the system to build new cache, so if u boost it too often , your cpu will be very busy building needed caches and may consume more battery than normal !
Boost it only when it's needed then there will be no problem !
How To Install ?
1) Download from the attachment below
2) Put into your sdcard
3) Reboot into CWM
4) Mounts /system
5) Flash it
6) Reboot
How to Use It?
1) Open terminal emulator
2) Type :su [hit enter]
:boost [hit enter]
How to uninstall adrenaline boost
just flash uninstaller
Thanks:
IMBAWIND for adrenaline boost script
Note:
Dont use bothe scripts simultaneously please uninstalling the script before u try another one
[SOLUTION] No lockscreen and No power option
Guys most of us encountered a similar problem like this - for no reason the lockscreen and power option menu wont work
sometimes you will get red warning like 'factory mode is on' some features wont work properly
Guys it's because of Corrupted EFS folder
So here is the exact solution to get rid of factory mode into user mode [get back your lockscreen and power option menu]
Its a proven method
You have to root your phone and install Terminal Emulator from Google Play.
Open terminal emulator and type as ;
su
rm /efs/FactoryApp/keystr
rm /efs/FactoryApp/factorymode
echo -n ON >> /efs/FactoryApp/keystr
echo -n ON >> /efs/FactoryApp/factorymode
chown 1000.1000 /efs/FactoryApp/keystr
chown 1000.1000 /efs/FactoryApp/factorymode
chmod 0744 /efs/FactoryApp/keystr
chmod 0744 /efs/FactoryApp/factorymode
reboot
You now should not see the that message anymore. Its because of an EFS corruption.
Hope it helps!!!
Time to enjoy 'hurray' i got my lockscreen and power option menu :fingers-crossed::fingers-crossed::fingers-crossed:
Memory Swap Method
External to Internal Memory Swap method :victory::victory::victory:
please follow the steps carefully :laugh::laugh::laugh:
- Download and install the app that i attached here
- open the app and grant permission
- pop up message will appear press'I dont care'
- go to settings:
1.check 'send rescan'
2. check 'Use per default'
- press original mounting point and change as 'sdcard0'
- press Ext.sdcard device Access and change the value from 179:49 to 179:33 its our device access value
- press back button and come to main screen
- check 'At Boot' box
- Now press External>Internal*
- wait till u get a small fraction popup message like 'Android sdcard permission granted' something like this
- Now go to storage option in settings there u will see your ext sdcard is swaped as internal sdcard
- Reboot device to work properly
Guys it works only on JB 4.1.2 and if you dont like to swap just uninstall app and reboot
Use Class 6 or Class 10 Sdcards...I prefer Class 10 :angel::angel::angel:
Dont worry all your apps data will be swaped to ext sdcard so apps will work normally
I swaped my 8gb sdcard as internal memory:
If u use 16gb - internal will be 16gb
If u use 32gb - internal will be 32gb
Screenshots:
Guys solution for No lockscreen and No power option updated in the thread
Thx doc for the gud work but I have not tested yet
Sent from my GT-I8552 using xda app-developers app
Guys on behalf of our device I sent a form to xda owners requesting for a forum for us and also told that we have been shouting since so many months...I think it will work and waiting for reply.
We have positive signs now to get separate forum.
Sent from my GT-I8552 using Tapatalk 2
Sent from my GT-I8552 using Tapatalk 2
Guys wat ever doubt u have please discuss here in the thread so that this thread will become popular to all and we will have more people to see so don't PM me for doubts and I'll help here rather....
Sent from my GT-I8552 using Tapatalk 2
thanks buddy
thanks bro yesterday i tried ur method of Supremacy Trilogy ,feels good battery back and increased performance. .
Thanks for reporting tony....check this thread it will be updated regularly
Sent from my GT-I8552 using Tapatalk 2
thanks rahul and tony for feedback...its a very good script those who need to increase their phone performance, battery backup and to improve game performance in stock rom
try adrenaline boost when u play games...its totally awesome with 'Zero' lag..
try it guys everybody
Thanks ash for trying and feedback
Sent from my GT-I8552 using Tapatalk 2
Guys updating memory swap (working) method for our device...
With screenshots
Sent from my GT-I8552 using Tapatalk 2
Guys thread updated with memory swap methods have a try those who want to increase thier internal memory :victory::fingers-crossed:
Doc seperated threads will.increase the popularity
Sent from my GT-I8552 using XDA Premium 4 mobile app
rahulsnair said:
Doc seperated threads will.increase the popularity
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok I'll separate it
Sent from my GT-I8552 using Tapatalk 2
Doc busy wood xams till 10 th later a new rom for u guys and aim tryn yr script
Sent from my GT-I8552 using xda premium
Rohit Shrothrium said:
Doc busy wood xams till 10 th later a new rom for u guys and aim tryn yr script
Sent from my GT-I8552 using xda premium
Click to expand...
Click to collapse
Try it rohit it will really boost your phone battery and cpu..
Sent from my GT-I8552 using Tapatalk 2
Doc any costume kernels
Sent from my GT-I8552 using xda premium
No not yet rohit
Sent from my GT-I8552 using Tapatalk now Free