Welcome to my OTPA roms!
Version 1.2.x -> Base build is 1.79.482.3 146733
Version 1.4.x -> Base build is 2.73.405.38
Version 1.5.x -> Base build is a mix of 2.73.405.38 and Sense UI 4 Magic
Version 2.0.x -> Base build is a mix of 2.73.405.38, Sense UI 4 Magic, updated kernel, and etc
Version 3.0.x -> Base build is a mix of 2.73.405.38/3.03.990.6, Sense UI 4 Magic, updated kernel, and etc
Credit/Thanks goes to MLIGN, JAC, CC, Paul @ MoDaCo, Drizzy, QTek, Cyanogen, Haykuro, Twistedumbrella, DWang, bouyark, jabbawalkee, sardoid, others, and of course XDA itself.
The Beta Testers
bouyark
sardoid
jabbawalkee
djlman
Donators:
Bouyark
DJlman
PDL
WebghostDK
tfoteh
Requirements:
Format your sdcard with the following specs.
Fat32
ext2/3
linux-swap - At least 96mb
How to setup sdcards
How To Partition SD Card With Ubuntu
From the recovery mod
Manual partition of sdcard w/parted,goto ext3/4 from adb. no liveCD req'd
==================================
Then use the following command or your own.
Run the following command in the adb shell
# Backup your apps using the following commands.
mkdir /sdcard/backup
mkdir /sdcard/backup/app
mkdir /sdcard/backup/app-private
cp -R /system/sd/app/*.* /sdcard/backup/app
cp -R /system/sd/app-private/*.* /sdcard/backup/app-private
# Remove app_s files from system before starting the flashing process.
rm -r /system/sd/app_s/*.*
reboot recovery
Then a WIPE is required...!
These steps need to be performed before flashing this rom.
My otpi will do the same one you've already flashed this rom.
Disclaimer:
This rom is for "HTC Magic/MyTouch 3G/32B devices only.
Please make sure to make a nandroid backup before flashing this rom.
I am not responsible for bricked devices, dead sdcards, and etc.
Please do some research before trying to flash this rom.
Mods:
Added: Bluetooth fix
Moved to app: BizCardReader
Moved to app: HTC_IME
Moved to app: Maps
Moved to app: Quickoffice 1.0.1
Moved to app: teeter
Settings:
Default with Linux Swap set at 60 swappiness
If for some reason it does not set swappiness to 60, then please use swapper to adjust as needed.
Tips:
Create a folder called backup on your sdcard before flashing this rom.
Then another folder called app within the backup folder.
Copy your currenlty used apps into the app folder.
Once your done flashing this rom, connect your device and within adb shell, type otpr.
This will copy all files within your sdcard/backup/app onto /system/sd/app
Tools:
The following tools will be added to this rom, simply connect your system via adb shell and type names below.
otpi
This simple add-on script will backup your app to sdcard/backup/app, then remove all existing files from app_s and app.
Once completed it will reboot your device into recovery mode so that you can flash another rom.
otpm
This simple add-on script will simply mount your sd card with read + write options.
otpr
This simple add-on script will restore your save files from sd/backup/app to your /system/sd/app folder.
=======================================================================
Still working on fixing the following:
1. FC when searching contacts
2. Full Bluetooth support
============================
Version 1.5
OTPA.v.1.5.5 - Updates
This update will fix the miss call issues when present.
It also includes Java and a few addional apps.
It also fixes the sound issue.
There are two versions one with A2sd as with the current rom and one without A2sd.
Do not perform a wipe when using Updates.
If the swappiness drops from 60 to 10 after a reboot, please download swapper and adjust as needed. I will include swapper in the next update.
==========================================
OTPA.v.2.0 - Sense UI 4 Magic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Contents:
Bluetooth muisc still works
Faster
More Stable
Black Dialer -> Thanks to twisted for his help
Transparent Lockscreen -> Got bored waiting for a new phone...lol
Replaced kernel with drizzy's -> with some minor edits to the boot.img by me
Removed all warez
Hard coded swappiness to 60 -> Yes, it will stay at 60 after reboots. Do no use swapper on this version...!
Set cpu to 38400 instead of max to help reduce battery drain.
And other things I forgot about.
Wifi Fix - OTPA.v.2.0 - Magic Users Only and Not MyTouch
Do not perform a wipe when using Updates.
====================================
Version 3.0
New Rosie look
Black out theme
Back with old screen lock since people did not like the clear look..lol
Update apks and framework
Two different versions
One with BT Music (Music streaming only not full BT)
One without BT Music (Much smoother since it has the newer core, people search works...lol)
and etc
All roms moved to 4shared folder.
====================================
App Pack v.1.1
Roms Folder - 4shared
========================================
Enjoy,
Suggestions.
If I may:
- Add Plurk, including the widget.
- Render the notification tray transparent.
- Implement EXT4 support.
- Be sure that the Compcache modules are correct.
- Linux-swap supported AND/OR back_swap supported.
- Add Stocks, including the widget. (It's not that much of a resource hog.)
- Add Spare Parts.
- Keep all standard wallpapers to avoid gallery selection force closes.
- Keep all media to avoid "Ringdroid" or "Rings Extended" force closes.
- Keep the standard lock screen w/ throttle bar. (It's gorgeous.)
- Be sure that the latest kernel is the BFS-222 kernel. (Cyanogen's latest is.)
- (Opt.) Twisted's "black dialer."
- (Opt.) 2.73 based-build number. (Modaco's latest WWE dump.)
If you can make that happen before your release...or keeps your initial release HELD OFF...that's fine, trust me ---> it'll be worth it!
The community would be going nuts if you can make some of that happen!
Seriously, if you make at least half of that happen, I'll flash this ROM to both of my devices, and promote the hell outta' this.
Thanks.
EDIT: The reason for the Modaco dump suggestion is because he has the only build that DOES NOT force close while using the People Search function in the contacts. That's a big deal. IMO.
haha am i following you or the other way around. i Used your rom on my Wing, so i will be sure to check this one out.
TTran!!! Dude!! Your on sapph and dream roms now. You are my hero from herald forum!! I cant wait to see what happens with you toying with android!! Now lets go get Ivan lol!!
Be waiting for your upload
Ttran...
Great you here on andriod LOL. I used your rom for HTC Wing LOL..and i still have it..(too bad you retired from it) look foward in your work...
downloading now. About to install. Will report back shortly
vtecbros said:
downloading now. About to install. Will report back shortly
Click to expand...
Click to collapse
Thank you for the response,
Please remember that this is a full version so it might run a bit slower.
I'm running a strip down version of this rom and its working great so far.
E:Failure at line 3:
copy_dir PACKAGE:system System:
Installation aborted.
Tried twice...and still have this message??
x1tyme said:
E:Failure at line 3:
copy_dir PACKAGE:system System:
Installation aborted.
Tried twice...and still have this message??
Click to expand...
Click to collapse
That's strange, I've test it before uploading, the file must have gotten corrupted or something.
I'm going to download it and try again.
File is not available from megaupload...
nevermind, i guess you're uploading it again
Bro this thing is very fast. And as what you said its a full verison so it might be a bit slow. But i dont think its slow at all. I have a class 2 4gb. Its still fast! Getting my class 6 in 3 days
I did notice one thing, with JACHEROski builds the prediction on QWERTY mode prediction dont work. But that is not a problem to me i can just use better keyboard while this whole thing gets figured out why it wont work on texting mode only.
But hey other than that this ROM is go for.
Thanks.
x1tyme said:
E:Failure at line 3:
copy_dir PACKAGE:system System:
Installation aborted.
Tried twice...and still have this message??
Click to expand...
Click to collapse
I just flahed it again did not have any problem, but I've already started uploading it again so, please hang in there.
schtuka said:
File is not available from megaupload...
nevermind, i guess you're uploading it again
Click to expand...
Click to collapse
The upload has been completed.
Thank you for taking the time to try my rom out.
vtecbros said:
Bro this thing is very fast. And as what you said its a full verison so it might be a bit slow. But i dont think its slow at all. I have a class 2 4gb. Its still fast! Getting my class 6 in 3 days
I did notice one thing, with JACHEROski builds the prediction on QWERTY mode prediction dont work. But that is not a problem to me i can just use better keyboard while this whole thing gets figured out why it wont work on texting mode only.
But hey other than that this ROM is go for.
Thanks.
Click to expand...
Click to collapse
Thank you for your feedback.
Hey ttran001,
I seen that you had to re-upload the file.
The one you just re-upload were there any chance to it? There is 3mb less then the first one you uploaded?
vtecbros said:
Hey ttran001,
I seen that you had to re-upload the file.
The one you just re-upload were there any chance to it? There is 3mb less then the first one you uploaded?
Click to expand...
Click to collapse
Man, I'm starting to hate megaupload.
It should be the same file.
As for changes, I'm going to wait until tomorrow after folks have had time to download it and provide their feedback.
I personally like the other build I have of JaCs, but it looks as if people want MoDaCo rom.
ttran001 said:
Man, I'm starting to hate megaupload.
It should be the same file.
As for changes, I'm going to wait until tomorrow after folks have had time to download it and provide their feedback.
I personally like the other build I have of JaCs, but it looks as if people want MoDaCo rom.
Click to expand...
Click to collapse
Well The MoDaCo is running smooth right now. But maybe you can make a build with JaCs and then just upload for testing.
idk?
ttran001 said:
I just flahed it again did not have any problem, but I've already started uploading it again so, please hang in there.
Click to expand...
Click to collapse
I tried to dl it..(even switch memory card) still have the same message???
ttran001 when will you be releasing the Lite verison?
later today?
Related
This is an old thread now. Moved to keep things easier. new thread ?t=670098
Download:
"Full" Version - (full dc, JIT/Swap/a2sd with dalvik/apps moved, 32apks banned) - more @&postcount=84
If you want to disable JIT & go back to sense just pull your /system/etc/dc.conf and replace it with the one code quotes below.
4-23 http://www.4shared.com/file/bVN1T-zN/TrevE_NewDamageMods423FULL.html
-(hopefully) fixes issues with new install & no wallpaper :|
-fix up fb sync again
-few other goodies (yes shes bloated,ill optimize when its reported working)
If you get bootloops upgrading try whacking private apps
adb remount
adb shell rm /data/app-private/*
adb shell reboot
older versions: (not recommended)
4-22 - http://www.4shared.com/file/smHMIWMe/TrevE_NewDamageMods422FULL.html
-Fixes issues with JIT & launcher.
-Adds in live wallpapers. libgsl.so is included (should make lwp stick but could cause graphics issues in opengl games. youo should be able to adb shell rm /system/lib/libgsl.so if you want 'unsticky' lwp but fixed games. Will eventually have a switch if you want lwp or Weather wp in sense.
-minor
4-21 version http://www.4shared.com/file/U8lsLrsv/TrevE_NewDamageMods421FULL.html
Update Version
***This is alittle outdated now. Once i have confirmation newer updates work ill fix this as well****
update.zip (only modifies files needed should be flashable on anything based on DC, JIT/swap/banned apps OFF, dalvik/apps moved) - http://www.4shared.com/file/8j7J5_y6/update_signed.html
*4/21 @ 5pm est version* --Fixes permissions issue with zipalign
Fixes:
-Avalaunches 'Eris' Audio fix for this kernel (still testing only flash if your having a problem) - http://www.4shared.com/file/Y7czJU0K/AvalaunchErisFix420_TrevE.html
More info ?t=657244 (do not use the zips from his thread they will not work with this)
About this mod:
just a few features
-new more robust a2sd should fix alot of issues. Logs to /data/dcboot.log if you lock on boot pull that file before you restart and post here. (overwritten each reboot)
-zipalign apks in /data/app if they need it on boot. Logs output to above log aswell.
-first boot will take forevor. just wait. We wipe dalvik, check for app uuid mismatches & potentially move files around for a2sd. Only the initial boot will be painful but Its worth it for a clean upgrade.
-easy JIT. Been using LWP in helix launcher for awhile now. pretty stable
-everythings stored in a nice dc config file. no dummy folder mess. now dc can be tweaked more than ever & makes saving settings for upgrades easy.
*Testing now* Adding in a delete parameter to bannedapps.conf. if you delete the same apps every upgrade now just make a list of them and it will be automatic.
Still testing, havent heard of any bugs so far. let me know ill get it working. also if you want to help build off of this shoot me a PM
TrevE:
stock 4.0-4.2 ish mem, 2.254 MFLOPS (ss above)
with just [email protected] enabled 4.7ish mem
[email protected] & JIT enabled (8-8.5ish memory, 3.6 MFLOPS): &postcount=18
Is HTCLockscreen the Vanilla one or the big gray pulldown bar? Downloaded. Will flash after I have had some coffee.
Downloading and flashing.
tejasrichard said:
Downloading and flashing.
Click to expand...
Click to collapse
me 2chars
Treve, a few Q's:
Is this newer than than the one from yesterday afternoon? - nvm, i learned how to read
This requires a wipe and reflash of the rom first? - gonna give it a try without reflashing the rom, hope it goes well
Is autokiller compatible with these kernel mods or do I have to edit dc.conf to change the minfree settings?
Can someone post membench with jit enabled. Using this rom and these mods.
Well I flashed it over the rom I was running (modified dc2.07.2) with no ill effects that I can tell so far.
I am still curious though how to go about manipulating minfree...
I guess I'll toy with dc.conf
Thanks TrevE!!
wow
I know you said it was a long boot but wow that took me 10 minutes first time trying to use a2sd hope things go well
Ok so the long boot only come to it a boot loop when ever i touch the screen it now reboots, I wiped the phone clean everything then reflashed DC2.07.2 booted made sure everything worked turned off the phone applied the update and again as soon as i touch the screen the phone freezes and reboots. what am i doing wrong
Just did the update. For some reason rosie seems to force close whenever I change to any page other than the main home screen. Kind of strange, really.
Do you have JIT on? Seems even having the files there with the build.prop line thats suppose to disable is causing issues for some people. Already have a new script to try to keep JIT files elsewhere until enabled just finishing up code checking now, for now you can try to
adb remount
adb shell rm /system/bin/dalvikvm
adb shell rm /system/lib/libdvm.so
adb shell rm /system/lib/libnativehelper.so
adb shell reboot
Click to expand...
Click to collapse
see if that helps. If nto reboot to recovery + wipe dalvik-cache.
TrevE, this is awesome! I'm going to see if I can start to build a plain Vanilla ROM off of this with JIT and everything enabled (that is if you don't mind).
mrinehart93 said:
TrevE, this is awesome! I'm going to see if I can start to build a plain Vanilla ROM off of this with JIT and everything enabled (that is if you don't mind).
Click to expand...
Click to collapse
thats fine by me just give me props where props are due feel free to work off the code i started too, im just an IT guy not a dev so im sure theres things that can be cleaner.
New version will be up shortly
looks cool good work...if i dont use a2sd and dont partition my sd and all that but enable JIT will this **** anything up?
TrevE said:
thats fine by me just give me props where props are due feel free to work off the code i started too, im just an IT guy not a dev so im sure theres things that can be cleaner.
New version will be up shortly
Click to expand...
Click to collapse
All I will basically end up doing is creating an AOSP-style ROM that is clean and fast, JIT-enabled, but keeps the stability of the HTC ROM's.
mrinehart93 said:
All I will basically end up doing is creating an AOSP-style ROM that is clean and fast, JIT-enabled, but keeps the stability of the HTC ROM's.
Click to expand...
Click to collapse
The faster you do this, the faster I will be a happy camper! lol
Hah alright. You can try Ic3Rom right now if you want... mine will be similar in appearance, but will have the old OpenGL (better Launcher2 performance), no LWP's since IMO they slow things down and drain battery faster, and will obviously be JIT enabled. There is really no reason NOT to use JIT anymore... especially since we're getting it figured out more.
Ahh speaking of figuring jit out more i just realized the build.prop isn't even used for jit. As soon as the files hit /system/lib/ its enabled.
New version that fixes JIT enable/disable has been uploaded to same link in first post. Ill post screenshots in a sec of benchmarks for swapping + jit on my c6 card.
**Remember if your using JIT delete HTC lockscreen (or just use menu+menu to unlock, swipe and youll freeze up.) also use homeswitcher to set launcher as a default before flashing**
Here is tests of swapping set to 30, a2sd & dalvik moved to sd & JIT enabled
Using a c6 sd card
Swap is working:
Code:
# free
free
total used free shared buffers
Mem: 195632 193408 2224 0 984
Swap: 31704 1020 30684
Total: 227336 194428 32908
I see a buncha messages about JIT floating by logcat. Its def on. Im impressed almost doubled mem scores...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TrevE said:
Do you have JIT on? Seems even having the files there with the build.prop line thats suppose to disable is causing issues for some people. Already have a new script to try to keep JIT files elsewhere until enabled just finishing up code checking now, for now you can try to
see if that helps. If nto reboot to recovery + wipe dalvik-cache.
Click to expand...
Click to collapse
JIT is not on. It didn't seem to have helped, the phone has been sitting at the HTC screen for about 40 minutes. I did a nandroid restore. Going to try wiping dalvik cache in the recovery screen.
how can we enable JIT without enabling a2sd?
As many of you know, Firerat is a genius, and has made an amazing implementation of lbcoder's idea for mtd partitions in this thread below (the link)
Disclaimer said:
You must read this thread and understand that these are not conventional, easy-to-flash roms. You must understand how to do the process in the thread below, as well as a comprehensive idea of what is going on at each step, and so on. Good luck, feel free to use the following list of roms to your disposal.
If you don't have the experience to do this, stay out of the thread until you've figured it out. I don't like stupid questions that are answered by this simple link:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=7061471
This is the place collection of roms I will make that work with this hack, and are unusually fast and stable, due to no symlinks and no a2sd. People please keep posting your mods, i'm just the keeper of this thread because i'm online often and can update op. Thanks to the community for this amazing method.
Firerat said:
you only need to flash the recovery patch once, each time you want to resize
you must reboot each time you resize
you must fastboot erase system -w each time you resize, or for convenience use clockworks partition formats (before reboot)
you must use the bootpatcher, unless the ROM is pre-patched with AutoMTD
if you need many apps, keep a2sd
if you want to remove a2sd (old style, pre cm5), you must replace with
Code:
#!/system/bin/sh
cm.filesystem.ready 1
read the custom MTD thread, your question is probably already answered
Click to expand...
Click to collapse
ZXhero 1.4.4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
161 2
is your mtdpartmap.txt
Link: http://mediafire.com/?0m4hqxeanbkhend
Notes: you may have to adb shell and type
Code:
setprop cm.filesystem.ready 1
to get it to boot, i forget if I've fixed that in this rom.
Sensehero 1.4 Themed
Code:
133 2
is your mtdpartmap.txt
link: http://mediafire.com/?p6wbs6l444gsopa
Notes: my favorite hero of all time, now faster than ever. You may have to adb shell and type
Code:
setprop cm.filesystem.ready 1
to get it to boot, i forget if I've fixed that in this rom.
Froyo by Studjuice
Code:
90 2
is your mtdpartmap.txt
link: look in here for latest: http://www.mediafire.com/studjuice
gapps: http://kanged.net/mirror/download.php?file=gapps-mdpi-FRF91-3-signed.zip
Notes:http://forum.xda-developers.com/showpost.php?p=7214299&postcount=1281 for more info. READ IT
reserved!!!!!1
bro are you saying that i can run sense hero 1.4 themed (which by the way is also my favourite sense rom for the htc magic) with this this new txt file that will make it run smoother then before??? This was the 1st rom I ever used after my magic was rooted.
koolbear said:
bro are you saying that i can run sense hero 1.4 themed (which by the way is also my favourite sense rom for the htc magic) with this this new txt file that will make it run smoother then before??? This was the 1st rom I ever used after my magic was rooted.
Click to expand...
Click to collapse
guaranteed. Turn off compcache, too and it'll fly. You have to install and patch the awesome recovery image in firerat's thread linked above. it's pretty complicated for most users, but if you can/already have done it, then go ahead. firerat makes it easy!
So is the patch already integrated into the ROM? Just download and flash? If so, you are my "hero"
that would be really awesome! but wow that guide given by Sir Firerat looks complicated to me I'll wait to see if a more simplified instruction is supplied lol. anyways thanks for your hard work brother
infinitybiff said:
So is the patch already integrated into the ROM? Just download and flash? If so, you are my "hero"
Click to expand...
Click to collapse
haha no you still need the custom recovery and the sdcard file...
and the fr boot patch.
I've just rearranged these roms for optimal performance with the above configuration.
I vote for FR's MTSlide
would you added to the collection?
EDIT: I just tested SenseHero and runs really smooth but, oh surprise when I realized it is Firmware 1.5 still
also you have to type: "setprop cm.filesystem.ready 1" on every reboot or it won't boot.. very inconvenience (b/c of adb)
thanks for sharing this anyways
jcarrz1 said:
haha no you still need the custom recovery and the sdcard file...
and the fr boot patch.
I've just rearranged these roms for optimal performance with the above configuration.
Click to expand...
Click to collapse
Hey if you could help me get this to work, i could add it into my rom and you could include it. that way you don't only have sense roms and you can have a flying froyo.
This would also be good because i yanked the a2sd script from my rom and recommended people use the mtd hack if they needed more space, and if they needed MORE space then they could add the a2sd script themselves.
I've tried previously to get the mtd part hacks going in my tests. but never successfully got it. this was back using the froyo aosp. When i tried doing the mtd hack it wouldn't run scripts on boot. (that's not good ) and my data size never changed
i had flashed the recovery1_1, and added the automtd stuff that firerat had created and posted in our thread for the rom (replaced the boot.img and edited the updater-script to flash it correctly).
I notice that now there might be newer stuff, so if he got that working, great. let me know the proper procedure for a cm6 based rom, and i'll try it and offer it for a test.
Thanks man, hope this works out!
Edit: well i tried this all again on my own. and got it working.
now i can't "touch the android to begin".. i just get "ignoring touch event because phone interface was null" from logcat. and i just did a fastboot wipe. ? do you think it's because of this? turns out it was because some idiot (me) decided to replace the phone.apk. but didn't notice he replaced it with phone.zip........... hahahahaha
anyways i now have a working MTD Froyo rom that's good news right? well, you would think so, but there is better news. I didn't think this rom could get faster. well damn was i wrong. this MTD hack really sped up not just the rom, but the boot up (not first boot).
Here's my post with my rom in it
There is no theme on it (yet). so flash any theme you want. metamorphs are recommended. dont blame me if you flash a theme through recovery and get a bootloop.
Hmm, mine says Insufficient storage space when I try to install things. Was I not supposed to flash firerat's no-A2SD patch?
on ZXHero
Can`t download anything from mediafire I would really like to try your work:|
eXase said:
Hmm, mine says Insufficient storage space when I try to install things. Was I not supposed to flash firerat's no-A2SD patch?
on ZXHero
Click to expand...
Click to collapse
ummm no. firerat's no-a2sd patch is completely unrelated. this if for firerats custom MTD patch.. lol
and that sounds like it was because you tried flashing one of those hero roms onto yourphone and you don't have room for it in /system. those roms need to use the mtd patch to increase system so they fit. mine decreases /system a tiny bit (default with mtd patch)
bubert said:
Can`t download anything from mediafire I would really like to try your work:|
Click to expand...
Click to collapse
dude that really sucks considering this whole page is mediafire links i'm uploading a mirror to megaupload, and i'll pm you when it's done. be about 6 minutes.
studjuice said:
ummm no. firerat's no-a2sd patch is completely unrelated. this if for firerats custom MTD patch.. lol
and that was because you tried flashing one of those hero roms onto yourphone and you don't have room for it in /system. those roms need to use the mtd patch to increase system so they fit. mine decreases /system a tiny bit (default with mtd patch)
.
Click to expand...
Click to collapse
I can fit the hero rom ANYWAY, I just wanted to see if there was a speed boost. and I'm pretty sure I followed instructions correctly.
I installed the firerats no-a2sd patch because i have no ext partition, and some roms don't boot without one and then continud to flash the custom MTD patch
eXase said:
I can fit the hero rom ANYWAY, I just wanted to see if there was a speed boost. and I'm pretty sure I followed instructions correctly.
I installed the firerats no-a2sd patch because i have no ext partition, and some roms don't boot without one and then continud to flash the custom MTD patch
Click to expand...
Click to collapse
Do you know how to flash the custom MTD patch? you need to patch the recovery, and then have the mtdpartmap.txt file on your sd card
then you flash the rom
studjuice said:
Do you know how to flash the custom MTD patch? you need to patch the recovery, and then have the mtdpartmap.txt file on your sd card
then you flash the rom
Click to expand...
Click to collapse
added your froyo to op. People please keep posting your mods, i'm just the keeper of this thread because i'm online often and can update op.
jcarrz1 said:
added your froyo to op. People please keep posting your mods, i'm just the keeper of this thread because i'm online often and can update op.
Click to expand...
Click to collapse
Thanks man, would you like me to PM you when there are updates? Because there are updates often
studjuice said:
Do you know how to flash the custom MTD patch? you need to patch the recovery, and then have the mtdpartmap.txt file on your sd card
then you flash the rom
Click to expand...
Click to collapse
the point of this rom is that you don't even need ext on ANY phone, g1 or mytouch... so the patch might have broken the a2sd bypass... lol
studjuice said:
Thanks man, would you like me to PM you when there are updates? Because there are updates often
Click to expand...
Click to collapse
The section of the post that is for your rom is actually future-proof... just pm me if the 90 has to grow at some point.
jcarrz1 said:
The section of the post that is for your rom is actually future-proof... just pm me if the 90 has to grow at some point.
Click to expand...
Click to collapse
Oh haha wow man you're badass, I didn't actually check where the links went
Oh dude i think you should include in the OP info about the two different types of mtdpartmap.txts and the recovery patches, just so we have a few less noob questions. Just say that they should make sure that the type of mtdpartmap.txt corresponds to the type of recovery patch they used, and example "this goes with this", "that goes with that"
jcarrz1 said:
the point of this rom is that you don't even need ext on ANY phone, g1 or mytouch... so the patch might have broken the a2sd bypass... lol
Click to expand...
Click to collapse
Hmm, so any suggestions how to fix it? I think its ignoring no-a2sd and is trying to install into my non-existant ext partition
This ROM is for ADVANCED S-OFF Users. Be aware, you must understand what your doing.
WIKI: http://insertcoin.baadnwz.eu please experienced users and fans bring your contribution to the wiki ..
IRC: irc.freenode.net #baadnwz-roms
The theory
ClassicalDude said:
Premise:
1. Performance degradation with HD roms (and regular ones as well) occur when essential parts of the device's operation are from the sd card, instead of working as much as possible from the internal memory.
2. Deodexed roms render a substantial part of the /system partition into a bloated archive, since no apk or jar file is actually used. Everything is odexed and copied into the dalvik-cache, which leads to -
3. The dalvik-cache of a deodexed rom is much larger than that of an odexed rom. So now we have large portions of the system partition that are not used, and a clogged data partition.
4. So we use a2sd, a2sd+, d2ext or d2we - and essentially, what we get is that almost nothing is being run from the internal memory. What a waste.
Click to expand...
Click to collapse
If this is true, only intensive testing will reveal. So lets give it a shot.
1st things 1st, you need to flash Bravo CM7 Hboot. either from fastboot or from hboot.- goto alpharev.nl site - is there together with all the info how to flash it
Rom Download link:
http://baadnewz.lcdc.sk/InsertCoinDATAplusplus/
Rom is the same as InsertCoin 2.0.0 A2SD+. But edited to fit to 130 nand, you'll need 1 gb ext2/3/4 partition.
P.S. framework folder lies under /system/sd/framework so you CANT flash zips directly from UOT, get the zip unpack it and push the framework-res.apk to /system/sd/framework
(you should know this if your a poweruser)
Free space after 1st boot
/dev/block/mtdblock3 130.0M 114.9M 15.1M 88% /system
/dev/block/mtdblock5 302.6M 93.6M 209.1M 31% /data
Freespace after i restored my apps:
/dev/block/mtdblock3 130.0M 114.9M 15.1M 88% /system
/dev/block/mtdblock5 302.6M 187.4M 115.2M 62% /data
Changelog:
27.03 UPDATE - new kernel
http://baadnewz.lcdc.sk/Desire_HD_B.../kernel-bravo-2.6.32.36-insertcoin-110327.zip
Changes in -110327:
* Usb/gadget code backports
* Updates from Google/CAF (fb, gpu)
* Upstream Linux update (2.6.32.36)
Changes in -110324:
Updates/fixes from HTC (usb/gadget/msm72k_udc, video/msm/mdp_ppp, binder, lowmemorykiller, serial/msm_serial_hs_bcm, atmega_microp)
Updates from Google/CAF (ashmem, cgroup, cpufreq, lowmemorykiller, evdev, gpu)
Linux update from upstream (2.6.32.35)
Extended CPU Vdd levels sysfs interface (vdd_min, vdd_max, vdd_step for scripting/frontend purposes)
Callrec support (avs333) included by default
19.03 - new kernel
http://baadnewz.lcdc.sk/Desire_HD_B.../kernel-bravo-2.6.32.33-insertcoin-110319.zip
flash from recovery, fixed slow charging bug - credits snq-
v03
- changed where market downloads, now it wont touch ur sdcard, you dont need a download folder - credits coolexe.
P.S. if you are brave enough ill just upload the boot.img, fastboot flash it on v02 and ur done (fastboot flash boot boot.img)
v02
- added powernotification widget
- changed battery icon to honeycomb
- updated busybox to 1.19
- FIXED MARKET DOWNLOADS (you must have a download folder on /sdcard)
just downloaded angry birds from market 16 mB .. all fine - again thanks alot to coolexe
v01
- initial release
If you want to show your appreciation click the button below
Thanks to the following developers (not in a specific order)
robocik, snq-, ownhere, coutts, melethron, Leedroid, Sub501, NeoPhyTe.x360, coolexe, sibere, droidzone, ClassicalDude, AlphaRev Team and all others who contributed somehow to Desire community.
Thanks to Donors:
stoeckler kookysan rexypow lcdc Mr_Kruz shatdhehat dongerado shadeofblue golightlygl yordaniy latawa 2 times Decibelnet dimcus ozjubb faceN D3n1s Karukera Tsuneku kingqueen trikpa KuliX pjm77 kartoffel1212 gajow Broquen FiremakerP SpeedyCarv Yod-b kizuodoko Hardianto photovirus aaargh777 fran_ele Sylaan Mr.Stylo nyunyu, Anakha56, malachay, Octosi, pasteyface, wboevink, odl, puneet_si Merchandraies, sandreiutz, sudkcoce, pexon, aleksb, tinky1, Odinbear, neoghio, 5om
Plus the ones who didnt want to be mentioned here.
I don't want to be misunderstood, I don't have a problem with noobs, we all were noobs once. But i mentioned this before, since you are flashing a hboot, if you are not an advanced user stay away. or 1st understand what you are doing, don't just follow steps and copy/ paste. And please, don't spam this thread with question like "how do i go back to stock hboot" "what addons are working" "why my uot update zip didn't work". If you have some basic knowledge of how an update.zip works you know what wrong.
reserved. 10char
We use the data Partition for Cache and Apps and the sdext for other data or system files ?
With the old scripts we do not really use the Data partition? I understand it right?
Sry for my bad english.... i need further infromation but it looks very good!
Downloading right now.
xtcislove said:
We use the data Partition for Cache and Apps and the sdext for other data or system files ?
With the old scripts we do not really use the Data partition? I understand it right?
Sry for my bad english.... i need further infromation but it looks very good!
Downloading right now.
Click to expand...
Click to collapse
Applications and system framework files don't run from jar or apk files. They run from odex files within the Dalvik Cache. So placing the Dalvik Cache on the sd card causes performance degradation, and keeping these jar and apk files in the internal memory is a waste of space.
In this method, we try to keep in the internal memory only the files the phone actually uses during its runtime, and move to the sd card all the archive files that are not in use.
Quadrant tests will probably not reveal an improved performance. They don't test for what we have done. But the user experience is much, much better.
Complete explanation: http://forum.xda-developers.com/showthread.php?t=992176
ClassicalDude said:
Applications and system framework files don't run from jar or apk files. They run from odex files within the Dalvik Cache. So placing the Dalvik Cache on the sd card causes performance degradation, and keeping these jar and apk files in the internal memory is a waste of space.
In this method, we try to keep in the internal memory only the files the phone actually uses during its runtime, and move to the sd card all the archive files that are not in use.
Quadrant tests will probably not reveal an improved performance. They don't test for what we have done. But the user experience is much, much better.
Complete explanation: http://forum.xda-developers.com/showthread.php?t=992176
Click to expand...
Click to collapse
Many thanks!
This was my Idea after reading this (but bad english [writing])
Quadrant Scores are not very itresting.... User Experience counts more.... I take a look now ;-) Few minutes and i can give a little feedback ;-)
awolbriggy said:
I am assuming this means the black out is over... This seems like an excellent direction to be heading, and the logic sounds sound! It is bed time on my side of the world, but I will definitely be testing this one out in the morning (or once i can slack off at work...)
For people who struggle with running commands, there is a windows app for flashing hboots/recoverys - fast boot commander which is a fairly easy way to proceed...
Big thanks to baadnewz (and co) for being so prolific in work of late.... keeps us compulsive rom swappers happy...
Click to expand...
Click to collapse
i still dont have a working pc @ home. cooked this @ work
are market download working for you ?
Works fine for now, market download works too!
baadnewz said:
are market download working for you ?
Click to expand...
Click to collapse
Just got a "not enough space" message while restoring my Apps from Market. Maybe to many downloads at once.
zomfgitsDace said:
Just got a "not enough space" message while restoring my Apps from Market. Maybe to many downloads at once.
Click to expand...
Click to collapse
That's the one problem with a tiny cache partition. You cannot have too many market downloads at once, and you cannot flash a new radio with a zip file. I sent a message to the wonderful people at alpharev, asking for a new partition layout. If this type of rom gains traction, they will probably accommodate us.
Device booted very fast And market is working.
Very responsive.
tomcat84 said:
Are market downloads saved to the cache partition?
What about market apps that are like 40 MB large?
Or did I get that wrong?
Click to expand...
Click to collapse
don't worry. coolexe helped with a workaround, now im testing the new full rom and will upload a new version
upload completed for some time enjoy
Here is PowerControl and Green Ginger Battery Mod for this ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
These toggles are available
Edit before start widget.txt if you want your power control.
toggleAirplane
toggleAutoRotate
toggleBluetooth
toggleBrightness
toggleFlashlight
toggleGPS
toggleLockScreen
toggleMobileData
toggleScreenTimeout
toggleSleepMode
toggleSound
toggleSync
toggleWifi
toggleWimax
Installation:
1- Copy "greenginger-insertcoin" folder to your sdcard
2- Reboot Recovery (i use Clockworkmod)
mount system
mount sdcard
mount sd-ext
3- Open cmd
cd C:/yoursdkfolder/tools
Code:
adb shell
cp /sdcard/greenginger-insertcoin/framework/framework-res.apk /sd-ext/framework_s/framework-res.apk
cp /sdcard/greenginger-insertcoin/framework/framework.jar /sd-ext/framework_s/framework.jar
cp /sdcard/greenginger-insertcoin/framework/services.jar /sd-ext/framework_s/services.jar
cp /sdcard/greenginger-insertcoin/app/PowerControlSettings.apk /sd-ext/app_s/PowerControlSettings.apk
cp /sdcard/greenginger-insertcoin/app/PCSCII.apk /sd-ext/app_s/PCSCII.apk
cp /sdcard/greenginger-insertcoin/customize/notification_config.txt /system/customize/notification_config.txt
cp /sdcard/greenginger-insertcoin/customize/widget.txt /system/customize/widget.txt
exit
adb reboot
4- Reboot your Desire
Enjoy!
Credits: GingerCarbon Mod by Krzysiec and me (installation)
MrLuje said:
Any feedback on the responsiveness between this ROM and the "classic" iNsertCoinHD a2sd?
I'm going to flash it after work
@proxuser : what is PCSCII.apk used for ?
Click to expand...
Click to collapse
PCSCII.apk is the USB connection stuff, the menu you see after usb connection.
Rom is still deodexed...coz we can't customized odexed files...
janikjan said:
Hi, is this ROM still deodexed or not? From yout first post I understood, that odexed rom has lower dalvik-cache than deodexed one. Thanks
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
Sent From Nokia 1100...!!!
i can odex files, but then using themes is a big nono
baadnewz said:
i can odex files, but then using themes is a big nono
Click to expand...
Click to collapse
If there are any improvements with odexing the ROM. You should do it! Unodexing is very easy!
This ROM is great so far. Your new script is great! It RUNßs a huge smoother as with Data2ext! Many thanks! Ive got this idea, too But no skills ^^
Hum, just flashed hboot cm7 and rom InsertCoinDATAplusplusv02
df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 203.2M 0 203.2M 0% /dev
/dev/block/mtdblock4 5.0M 852.0K 4.2M 17% /cache
/dev/block/mmcblk0p1 6.2G 4.9G 1.3G 79% /sdcard
/dev/block/mtdblock3 130.0M 31.0M 99.0M 24% /system
/dev/block/mmcblk0p2 1.1G 164.2M 943.8M 15% /sd-ext
/dev/block/mtdblock5 302.6M 15.6M 287.0M 5% /data
Click to expand...
Click to collapse
and I got this from logcat (while on bootscreen)
link_image[1995]: failed to link /system/bin/sh
CANNOT LINK EXECUTABLE
Click to expand...
Click to collapse
Any hints?
Edit : Flashed InsertCoinDATAplusplusv02 again and it worked, this time
MrLuje said:
Hum, just flashed hboot cm7 and rom InsertCoinDATAplusplusv02
and I got this from logcat (while on bootscreen)
Any hints?
Edit : Flashed InsertCoinDATAplusplusv02 again and it worked, this time
Click to expand...
Click to collapse
Same Problem here! just wipe and reflash always solve bootlops on InsertCoin ROM´s ;-) perfect and best rom =)
Edit: ROM is so responsive and quick! So great!
SuperAosp 6.4
Statement: http://www.movilzona.es/foro/superaosp-para-nexus-one-by-superatmel-tolemac-t4675.html
Special thanks to [email protected] workgroup for letting me join this group.
This ROM (not a mod) has been developed from the source of
Google (AOSP) and a very little part of Cyanogen framework.
Thanks to Cyanogen and all his staff for the contributions received.
I strongly recommend formatting SDCARD with the three
partitions, VFAT 7.4 GB / EXT3 512MB / LinuxSwap 64MB, you can do
from the recovery, but remember to save before your pictures and music.
This is because directories are created in the sdcard called Android in which
recording data that I have found that negatively affect the ROM.
This is only necessary if you want to have Apps2sd or Linux Swap,
if you're not going to make any of these things is not necessary to format
SDCARD with three partitions.
Steps:
1 .- is necessary to WIPE, since changes in the system have been
many are not compatible.
2 .- Reboot into recovery mode and install the downloaded file. Zip.
3 .- When you first start, do not worry if you reboot one or
twice, it can also take a while to leave the first splash, is
completely normal and running multiple configuration files in the first
home.
4 .- In the Welcome screen when you ask for the account
google, skip the configuration recommended giving ignored. This is
Auto connect the phone because the market and begin downloading
automatically all the applications you had installed and it saturates
terminal because it does blow, it also puts the background image
previous ROM. In this way you will do a clean install.
5 .- End to indicate the values that you requested and once in the
launcher set the phone to your liking.
6 .- Very attentive to you to do restorations of any kind or
ROM program against which you can have problems. (I mean backups,
including their own SupSetup least in the section on applications), special
attention to restore configuration data of any kind. Do
little by little to make sure everything is properly restored.
7 .- After you enter the market and a free application instaláis
either to refresh which you have installed in the terminal.
The new integrated SupSetup activation brings on-demand applications in
extra applications section.
It is important before you set up Google account are activated
from applications before SupSetup so that when you connect to the
servers to configure your Google account, they come under the heading of
downloads.
Apps2sd
Apps2sd is to pass the phone applications both current
future to the ext3 partition, it is essential not to trigger any mode
sd application to move or change from internal to external location
applications. Simply activate it from the SupSetup without touching any
configuration in the Spare Parts or applications from the ROM settings.
Apps2sd not activate without at least once you have restarted
Kernel
At the end of the kernel is not mine, of all the comments of several forums, I have
opted to include the COS-Stock kernel-2.6.36.4_EzTerry_05092011
that supports multiple versions of the radio and hboot.
NEWS from version 6.0
- Based on Ginger 2.3.4
- SOLUTION failure camera.
- New kernel (COS-Stock-2.6.36.4_EzTerry_05092011), with improved management
memory and battery.
- New languages: Polish (pl_PL) and Dutch (nl_NL).
- New translations into Spanish.
- Compact bar notifications.
- Removed support for NFC.
- Removed support for LED Flash.
- Removed support for WiMax.
Applications
- You can install more from applications SupSetup extras.
- Google Apps (Youtube, Gmail, Maps, Car home, Voice Search).
- Wireless Tether.
- Terminal emulator.
- Mini file manager
Download:
http://cdn.movilzona.es/repos/podxboq/roms/[email protected]
Performance statistics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
twitter: podxboq
Aha! Wonder if this would happen to work on the Dream? I may as well try it out!
Radio SPL Board?
This rom is for which Radio new or old, 32A or 32B board ?
Is it for multiple Radios?
podxboq said:
SuperAosp 6.4
Statement: http://www.movilzona.es/foro/superaosp-para-nexus-one-by-superatmel-tolemac-t4675.html
Special thanks to [email protected] workgroup for letting me join this group.
This ROM (not a mod) has been developed from the source of
Google (AOSP) and a very little part of Cyanogen framework.
Thanks to Cyanogen and all his staff for the contributions received.
I strongly recommend formatting SDCARD with the three
partitions, VFAT 7.4 GB / EXT3 512MB / LinuxSwap 64MB, you can do
from the recovery, but remember to save before your pictures and music.
This is because directories are created in the sdcard called Android in which
recording data that I have found that negatively affect the ROM.
This is only necessary if you want to have Apps2sd or Linux Swap,
if you're not going to make any of these things is not necessary to format
SDCARD with three partitions.
Steps:
1 .- is necessary to WIPE, since changes in the system have been
many are not compatible.
2 .- Reboot into recovery mode and install the downloaded file. Zip.
3 .- When you first start, do not worry if you reboot one or
twice, it can also take a while to leave the first splash, is
completely normal and running multiple configuration files in the first
home.
4 .- In the Welcome screen when you ask for the account
google, skip the configuration recommended giving ignored. This is
Auto connect the phone because the market and begin downloading
automatically all the applications you had installed and it saturates
terminal because it does blow, it also puts the background image
previous ROM. In this way you will do a clean install.
5 .- End to indicate the values that you requested and once in the
launcher set the phone to your liking.
6 .- Very attentive to you to do restorations of any kind or
ROM program against which you can have problems. (I mean backups,
including their own SupSetup least in the section on applications), special
attention to restore configuration data of any kind. Do
little by little to make sure everything is properly restored.
7 .- After you enter the market and a free application instaláis
either to refresh which you have installed in the terminal.
The new integrated SupSetup activation brings on-demand applications in
extra applications section.
It is important before you set up Google account are activated
from applications before SupSetup so that when you connect to the
servers to configure your Google account, they come under the heading of
downloads.
Apps2sd
Apps2sd is to pass the phone applications both current
future to the ext3 partition, it is essential not to trigger any mode
sd application to move or change from internal to external location
applications. Simply activate it from the SupSetup without touching any
configuration in the Spare Parts or applications from the ROM settings.
Apps2sd not activate without at least once you have restarted
Kernel
At the end of the kernel is not mine, of all the comments of several forums, I have
opted to include the COS-Stock kernel-2.6.36.4_EzTerry_05092011
that supports multiple versions of the radio and hboot.
NEWS from version 6.0
- Based on Ginger 2.3.4
- SOLUTION failure camera.
- New kernel (COS-Stock-2.6.36.4_EzTerry_05092011), with improved management
memory and battery.
- New languages: Polish (pl_PL) and Dutch (nl_NL).
- New translations into Spanish.
- Compact bar notifications.
- Removed support for NFC.
- Removed support for LED Flash.
- Removed support for WiMax.
Applications
- You can install more from applications SupSetup extras.
- Google Apps (Youtube, Gmail, Maps, Car home, Voice Search).
- Wireless Tether.
- Terminal emulator.
- Mini file manager
Download:
http://cdn.movilzona.es/repos/podxboq/roms/[email protected]
Performance statistics:
twitter: podxboq
Click to expand...
Click to collapse
Hebrew language pack
Dear podxboq,
I would appreciate if you you add Hebrew language pack (flash zip) to your excellent new 6.4 ver rom?
Any one try this rom on 32A magic?
what are impressions?
Thanks
@podxboq
Thanks for the great work! Love the new version as I have every version. Also, very happy to see you posting it on xda personally.
liderzre said:
Any one try this rom on 32A magic?
what are impressions?
Thanks
Click to expand...
Click to collapse
+1....................
Glad you started a thread here. I'm going to flash up to the new version. Thanks
You do know that the link at the top of the op takes you to the 8.0 version for the nexus one right? http://www.movilzona.es/foro/superao...mac-t4675.html
johnson8cyl said:
Glad you started a thread here. I'm going to flash up to the new version. Thanks
You do know that the link at the top of the op takes you to the 8.0 version for the nexus one right?
Click to expand...
Click to collapse
Yes, but the first post is for all devices, and all versions, and for everyone, is our agree license
guy8zv said:
Dear podxboq,
I would appreciate if you you add Hebrew language pack (flash zip) to your excellent new 6.4 ver rom?
Click to expand...
Click to collapse
Yes, your locale he_IL
turkeyshark said:
@podxboq
Thanks for the great work! Love the new version as I have every version. Also, very happy to see you posting it on xda personally.
Click to expand...
Click to collapse
Yes, and is hard for me, but I'll try.
karym1969 said:
This rom is for which Radio new or old, 32A or 32B board ?
Is it for multiple Radios?
Click to expand...
Click to collapse
This ROM has 3 kernel for various models, exactly i don't know which radio, boot and model combination work
This ROM has 3 kernel for various models, exactly i don't know which radio, boot and model combination work
Click to expand...
Click to collapse
Well until you can actually provide information on this Rom I don't think anyone should even touch it. If you guys are developers you should be able to provide this info no problem.
What about OC?
And screen on/off animation working?
Tested on new radio
I have tested it on my
HTC 32A
Radio 6.35.16.19
SPL : 1.76.2007
Recovery: Seo+-2.01
Stuck on the vodafone Splash screen for more than 10 minutes...
Back to CM7.
podxboq said:
Yes, but the first post is for all devices, and all versions, and for everyone, is our agree license
Yes, your locale he_IL
Yes, and is hard for me, but I'll try.
This ROM has 3 kernel for various models, exactly i don't know which radio, boot and model combination work
Click to expand...
Click to collapse
karym1969 said:
I have tested it on my
HTC 32A
Radio 6.35.16.19
SPL : 1.76.2007
Recovery: Seo+-2.01
Stuck on the vodafone Splash screen for more than 10 minutes...
Back to CM7.
Click to expand...
Click to collapse
you need the old radio and SPL . i've tried .
Yes said:
How I can get and flash Locale he_IL?
Click to expand...
Click to collapse
Immense pleasure to have you around here, @ PodxBoq .....
Thanks For Everything
With SuperAOSP 6.4 .....
Marabillas: Graphic level and performance level ................
My Settings:
Jit: On
Min Speed: 245
Max Speed: 576
Pitcher In Memory: From the Launcher, not from The Parts.
Probably not a good idea to put all models in the my touch section. Just a thought.
@ trebol what launcher are u using?
sent from my transparent xda app by the impaler747
I have it running for a day very smooth no FC's pretty fast and respnsive the battery life is OK could be better. I noticed that the WIFI does not switch to DATA when the Phone is in idle mode other than that I like it.
Good Job Thanks
really a great rom, I'm trying it on the old radio 32A.the installations from the market are now very quickly, well done keep it up
Sent from my HTC Magic using XDA App
Awesome ROM.
PD: GPS it's broken.
T-Mobile G1 - 32B
HBOOT-1.33.0013d (DREA10000)
RADIO-2.22.27.08
Give me back my GPS !!!
PD2: Just kidding, anyone else have this issue after flashing 6.4 ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
an AROMA based Touch UI Recovery Installer
As seen on Valhalla Black Edition and Team Acid AOKP
Please tell me if you're going to use this in your ROMs just so I know who is using it . Thank you.
This is for ROM chefs only, not for regular users. Regular users, you will see this in all your ROMs soon .
All the instructions below refer to the files in META-INF/com/google/android
You can change the splash image by replacing aroma/splash.png (make sure it's a PNG though)
As mentioned in the installation instructions, make sure your ROM's zip file matches that of Valhalla Black Final's for best results.
Full touch screen support
Allows for a typical install, using default settings
Allows the user to customize the ROM installation
Allows the chef to customize the user experience
Support for different themes/skins
Installs Busybox
Installs kernel if you desire
Installs modem if you desire
No need to check mounts, the installer properly mounts the partitions for you.
No need to format partitions, the installer can wipe them for you.
Download and extract the installer zip file
Edit aroma/installer.default.prop to set your ROM's information
Rename installer.default.prop to installer.prop
Edit aroma-config and updater-script to your liking
Extract your current ROM's zip
Delete your ROM's META-INF folder
Put the new SGS4G CWM Rom Installer's META-INF and tools folders in your ROM's root
Make sure your ROM's file structure matches that of AOKP Unofficial by TeamAcid, unless you know what you're doing
Create a new zip file
Flash away and test!
If you use this tool you have to link back to this thread and give me credit using the link. Example:
My ROM uses the SGS4G ROM Installer by FBis251
http://forum.xda-developers.com/showthread.php?t=1481228
installer.zip
Installer on GitHub
You can download installer.zip from the link above to get the latest version of the installer files to package into your own rom.
Octoboer 13, 2012
Remove touchscreen calibration fix /data extract bug
-- With aroma 2.55+ touchscreen calibration is no longer necessary
-- /data packages should get extracted properly after a /data restore
Updated to latest AROMA binary (2.56)
-- Much more stable binary in ICS recovery!
---- The newest binary hasn't crashed on me yet during testing unlike the older version (2.50) that was included in the last version of the SGS4G Installer.
Here is the AROMA changelog since the last version included in the SGS4G Installer
EDELWEIS - 2.56 - BUILD 121004-031
Fix capacitive button
Remove calibration tools
EDELWEIS - 2.55 - BUILD 121003-030
Completely new Input/Touchscreen Handler - Thanks to agrabren from TWRP
Remove all calibration need. calibtool(), calibrate() and calibrate_matrix() won't do anything now.
EDELWEIS - 2.51 - BUILD 120810-026
Supported Galaxy Nexus Touch Screen - And maybe other devices now supported
Click to expand...
Click to collapse
July 18, 2012
ICS public release
May 25, 2012
Fixed bug that wouldn't mount partitions
-- Added support for mounting /efs
Added /efs partition info to installer.default.prop
Fixed a bug that would cause redbend_ua to restart the phone while flashing
-- (Thanks to itzik2sh from xda-developers for the fix)
Updated efs-backup
Now only checks whether /efs is empty
-- Will be compatible with devices that don't use an nv_data.bin
May 23, 2012
Updated scripts for easier porting
-- aroma-config and updater-script now uses information from installer.prop
-- porting to new devices will now be a lot easier because of this
Updated efs-backup script
--Backups now only take up ~560kB of space, compared to 6.3mB before!
Added colors to the installation confirmation screen
May 2, 2012
Changed to using installer.prop file for controlling all the variables
-- Chefs no longer need to edit the main AROMA script
-- AROMA checks if the installer.prop file exists to prevent users who flash the zip from messing up their phones
Added an installation option confirmation screen to make sure users know what options were selected
April 15, 2012
Updated to aroma-2.00-120414-A7
Now checking for phone version using a kernel check. Should prevent Froyo users from installing a GB ROM
Fixed a bug that would always do a free space check even when the user didn't try to do a /data backup
Now doing a /data restore before the kernel flash. Some ROMs caused the phone to reboot once the kernel flashed which means the /data restore never happened.
March 11, 2012
Updated AROMA binary to 2.0a4
Changed busybox version back to busybox v1.19.0.git
Now using aroma's TrueType font support
-- Installer uses the rom's default font (DroidSans)
Updated ROM information screen
Reboot prompt moved to the end of the installation
Updated Agreement to add formatting
Added efs-backup script which makes a backup of the efs partition
-- Saved under /sdcard/aroma-backup
Now has UTF-8 and RTL support!
March 3, 2012
Forced installation of busybox
Updated busybox to bonsai's version v1.17.1 (2010-08-12 23:44:34 CDT)
Fixed a bug that wouldn't allow the data backup and restore scripts to run
Moved mke2fs.conf to tools directory
Updated the sdcard free space check for /data backup
-- Will now only warn users when they selected the backup option in customized installs
March 3, 2012
Cleaned up a lot of the aroma-config code for easier reading
Deleted duplicate busybox binary
Deleted changelog.txt since no one used it
Added .gitignore
Updated busybox binary to version 1.19.4
Added monospace font
Now using the latest aroma nightly Version 1.62 build 120303-030
Using the latest themes from the nightly
Added a check to disallow /data backup when there isn't enough free sdcard space
-- Added a warning for the user to know the backup isn't going to happen
Updated touchscreen calibration values
Now displays filesystem and ROM information on the same screen
-- Added sdcard filesystem information
Reboot no longer done in the updater-script
Changed symlinks in updater-script to use busybox for more functions
Feb 12, 2012
Added aroma theme support. Check aroma/themes/
Added three themes, sense, MIUI and ICS (default ICS)
Added MIUI icons
Added filesystem (disk free/total and percentage used) information viewbox
Added ext4 format from bonsai's installer script.
-- Now does a full ext4 format and tuning before the install
Now allows choice of splash animation instead of static splash screen
Removed a lot of whitespace from aroma-config
Removed options to do wipes since the format takes care of this
Added data backup option
Now using bonsai backup. Left compression enabled for minimal sd storage usage.
Backup may take up to 10 minutes to complete!
Removed color.prop (no longer needed due to themes)
Changed checking for SGH-T959V to allow you to continue in case there is no ROM installed.
Feb 5, 2012
Edited updater script to output all installer options to one prop file
Now using variables in aroma-config for easier writing of the final options.prop file
Cleaned up updater-script to only use one .prop file
Fixed a bug that would make the wipe /data dialog come up even when deselected in the customized install
The script will now ask the user if they want to reboot their phones in all instances before the install gets going.
Now using Roboto font
Added color.prop file to control theme colors
Updated the wording on the install type chooser
Click to expand...
Click to collapse
FB
I was just gonna thank you for this over on Black thread. Glad you got this out for folks. Slick very slick. Who needs ROM manager(mangler) when you're around. So thanks to you and everyone else who worked on it.
I just used this a few hours ago I installed the black final rom with touch screen features is cool!
Sent from my SGH-T959V using XDA Premium App
FB, I will be using it for the next edition of AOSP Style coming out soon. I have already built mos of the rom and its installer, but I needed verification.
airfluip1 said:
FB, I will be using it for the next edition of AOSP Style coming out soon. I have already built mos of the rom and its installer, but I needed verification.
Click to expand...
Click to collapse
Sounds good. Just follow the OP if you'd like. I'm sure you already looked through the scripts. You should theme the installer to make it look like your ROM .
airflip if u are using my rom as a base its already in there .... which u asked me to use so.....
FB, I just flashed Raver's final and everything flashed fine then when the installer was done it showed an error having to do with not finding a path for something. I was going to re do it and copy the error down but now the phone is stuck at the T-Mo screen and it won't go into recovery with the button combo. I'm going to Odin it in the morning and re-flash and see if it throws the error again and I'll let you know.
bswann said:
FB, I just flashed Raver's final and everything flashed fine then when the installer was done it showed an error having to do with not finding a path for something. I was going to re do it and copy the error down but now the phone is stuck at the T-Mo screen and it won't go into recovery with the button combo. I'm going to Odin it in the morning and re-flash and see if it throws the error again and I'll let you know.
Click to expand...
Click to collapse
Same error on my sgs4g I think it was a temp file error, didn't affect my rom booting though.
Sent from my Glacier using xda premium
bswann said:
FB, I just flashed Raver's final and everything flashed fine then when the installer was done it showed an error having to do with not finding a path for something. I was going to re do it and copy the error down but now the phone is stuck at the T-Mo screen and it won't go into recovery with the button combo. I'm going to Odin it in the morning and re-flash and see if it throws the error again and I'll let you know.
Click to expand...
Click to collapse
If it happens again, hit save log and send that to me. I'd really like to see it.
Gr8 job FB - thank you very much.
We'll probably also use it in our next version
10x
Thanks Guys!!!(Raver,FB)
FBis251 said:
If it happens again, hit save log and send that to me. I'd really like to see it.
Click to expand...
Click to collapse
FB, awesome work man. Lovin it. I had an error on my install but the ROM installed fine and booted fine. I made a log anyway so I could send it to you. Maybe it can be of some use.
alon2 said:
Gr8 job FB - thank you very much.
We'll probably also use it in our next version
10x
Click to expand...
Click to collapse
Awesome, don't forget to post here if you have any usage questions. I wound up taking out a lot of the comments for space, but I learned the syntax of the AROMA functions pretty well.
putsometrebleinit said:
FB, awesome work man. Lovin it. I had an error on my install but the ROM installed fine and booted fine. I made a log anyway so I could send it to you. Maybe it can be of some use.
Click to expand...
Click to collapse
Yes I'd love to see that.
airfluip1 said:
Thanks Guys!!!(Raver,FB)
Click to expand...
Click to collapse
No problem. I'm guessing it's working fine?
Cool very very neat. Never seen this on a phone before
Sent from my SGH-T959V using xda premium
FBis251 said:
Awesome, don't forget to post here if you have any usage questions. I wound up taking out a lot of the comments for space, but I learned the syntax of the AROMA functions pretty well.
Yes I'd love to see that.
No problem. I'm guessing it's working fine?
Click to expand...
Click to collapse
You are right. I am making this installer so customizable, from kernel to bootanimation.
airfluip1 said:
You are right. I am making this installer so customizable, from kernel to bootanimation.
Click to expand...
Click to collapse
I'm gonna release an update soon. You should look into it once I'm done since I simplified the updater-script portion of it.
What do you mean by "soon" because i may release 4.0 tomorrow. I just need to test my new features.
I'm doing final testing of the installer so in about an hour.
Feb 5, 2012
Edited updater script to output all installer options to one prop file
Now using variables in aroma-config for easier writing of the final options.prop file
Cleaned up updater-script to only use one .prop file
Fixed a bug that would make the wipe /data dialog come up even when deselected in the customized install
The script will now ask the user if they want to reboot their phones in all instances before the install gets going.
Now using Roboto font
Added color.prop file to control theme colors
Updated the wording on the install type chooser
Panicking right now because I can't seem to PM you FB.
I hope I don't come off as a stickler for details, but there's just a single typo in what is the 6th screenshot posted in the OP. It's for the option where you can choose to Wipe Data.
"...another ROM. Don't select if you want to keep your ap"
I'm assuming it was supposed to say "apps."
Just wanted to make note of it as I saw that Raver updated the contents in the aroma folder within the META-INF directory for his Valhalla Black rom. I was just thinking the typo might've been updated or something somehow.