Related
Can you experienced doods, help out a noob? I have recently rooted my phone (after MUCH research and reading) and just installed Set CPU app. I have been reading about the different settings for Set CPU, and it appears to be device specific, so I wanted to know if any can suggest some stable and useful settings and profiles I can use.
My goal would be to extend battery life and increase erformance while the phone is being used. I kinda guess this is most peoples reason for using this app. Slow the CPU down while the screen is off, and increase it a bit when the screen is on. I am not totally sure why you adjust it while it is charging. And wold this fi into the screen is off profile.
Ok enough rambling, and thanks for any assistance!
Forget SETCPU. Voltage Control is the way to go. For battery life, I would underclock to 100-800mhz and have -100mv all through the range. For performance, 100-1400 mhz (1.5 & 1.6 ghz are heavily overvolted) and have -100mv from 100-1000 mhz and -75 for 1100-1400. Leave the governers and io schedulers where they are.
Sent from my Droid Charge running GummyFroyo 1.9.1
kvswim said:
Forget SETCPU. Voltage Control is the way to go. For battery life, I would underclock to 100-800mhz and have -100mv all through the range. For performance, 100-1400 mhz (1.5 & 1.6 ghz are heavily overvolted) and have -100mv from 100-1000 mhz and -75 for 1100-1400. Leave the governers and io schedulers where they are.
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
Using the voltage control within SetCPU or a voltage control app?
Thanks
Edit: after installing set CPU my phone seems to be running slower than usual. So, I ran a quadrant benchmark and it is coming up with much lower scores than it did before. Is there any way to set it back to the original cpu speeds with out deleting the app?
Delete setcpu and get voltage control from the market.
Sent from my SCH-I510 using Tapatalk
sneakysolidbake said:
Delete setcpu and get voltage control from the market.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
anoninja118 said:
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
Click to expand...
Click to collapse
Thanks, can I use this with imnuts OTB kernal?
gdubya34 said:
Thanks, can I use this with imnuts OTB kernal?
Click to expand...
Click to collapse
you should be able to yeah.. try a different set of settings every day to find whats the most fast and stable on your phone, what works on mine may not necessarily work on yours or someone elses
blazing through on my VZ Droid Charge 4G
anoninja118 said:
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
Click to expand...
Click to collapse
Tried those settings and my phone froze a few times so I upped the voltage to get it to work for me. This is my first time overclocking a phone. Do any of these settings look strange using voltage control?
100-400mhz uv-75
800-1000mhz uv-50
1200-1300mhz uv-25
I haven't froze yet, although I noticed my battery drains a little faster then normal (that was expected).
hmmm.... The GummyCharged GBE 1.9RC1 8/13/11 kernel is not incompatible with the Voltage control free app.
Error message "Unsupported kernel detected. The kernel your device is running is incompatible with Voltage control."
praveen1789 said:
hmmm.... The GummyCharged GBE 1.9RC1 8/13/11 kernel is not incompatible with the Voltage control free app.
Error message "Unsupported kernel detected. The kernel your device is running is incompatible with Voltage control."
Click to expand...
Click to collapse
GummyCharge GBE is gingerbread which means stock kernel, no voodoo and therefore no changing of voltage settings
blazing through on my VZ Droid Charge 4G
Gotcha! Thanks to that.
Now I have a crazy question below. (trust me there are even more questions all over my mind now)
When they say "ROM", I'm assuming that its collective of Kernel, all the apps and the radio.... Can't we just downgrade the kernel of "GummyCharge GBE" Rom?
anoninja118 said:
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
Click to expand...
Click to collapse
These gave me a reboot watching netflix on wifi. Will try -25 @ 1300 and see what happens. Thanks for the post though. Its a great starting place for me.
running humble 1.51
Khanusma said:
These gave me a reboot watching netflix on wifi. Will try -25 @ 1300 and see what happens. Thanks for the post though. Its a great starting place for me.
running humble 1.51
Click to expand...
Click to collapse
Yeah those are kinda high 'performance' settings, not all phones like being overclocked or undervolted much less both lol.. Start with it just overclocked for a day or two and see how it runs, however there's gonna be some serious battery drain obviously. Then move on to undervolting slowly like maybe -25 across the board and leave 1400 alone for another day or two... just experiment like this until you have the right balance of speed, stability and battery life. As a matter of fact I toned mine down a bit afterwards and it worked nice:
Overclocked to 1.2ghz (1200mhz),
took out 600mhz frequency and set 100 to -75, then 200-800 at -50, 1000 and 1200 at -25
or if you want battery life and don't mind sacrificing a little performance you can underclock to 800mhz and set all to maybe -75... its a lot of testing to find what works for your phone, if it reboots freezes or lags too much its either overclocked too much or undervolted too much
edit: I also use the free voltage control app from the market, it lets you set min. and max. clock speeds as well as voltage so thats all I need lol
blazing through on my VZ Droid Charge 4G
praveen1789 said:
Gotcha! Thanks to that.
Now I have a crazy question below. (trust me there are even more questions all over my mind now)
When they say "ROM", I'm assuming that its collective of Kernel, all the apps and the radio.... Can't we just downgrade the kernel of "GummyCharge GBE" Rom?
Click to expand...
Click to collapse
Roms are not always all inclusive with a kernel and whatnot.. Most are custom apps, themes, and build/framework remakes to operate on top of the stock roms and will use stock radio and kernel to operate unless a custom radio/kernel is flashed. While most radios and apps will work well with different roms, kernels (being basically the 'engine' for the android OS i believe) are dependant on baseband and will not work by switching them around or flashing one over the other. This is the way I understand it to be anyway, I just know kernels are not compatible between 2.2 and 2.3
blazing through on my VZ Droid Charge 4G
anoninja118 said:
Roms are not always all inclusive with a kernel and whatnot.. Most are custom apps, themes, and build/framework remakes to operate on top of the stock roms and will use stock radio and kernel to operate unless a custom radio/kernel is flashed. While most radios and apps will work well with different roms, kernels (being basically the 'engine' for the android OS i believe) are dependant on baseband and will not work by switching them around or flashing one over the other. This is the way I understand it to be anyway, I just know kernels are not compatible between 2.2 and 2.3
blazing through on my VZ Droid Charge 4G
Click to expand...
Click to collapse
Makes sense. I'm sure the apps and radio are dependent on the kernel as it is the core. (like an Operating system that provides the platform for applications to work.)
I'm sure the developers thoroughly test these combinations before releasing any ROM, .
However I want to have some fun updating the kernel on the GC GBE 1.9 that I currently have on my charge with couple other kernels out there....
Will see if I create some magic
praveen1789 said:
Makes sense. I'm sure the apps and radio are dependent on the kernel as it is the core. (like an Operating system that provides the platform for applications to work.)
I'm sure the developers thoroughly test these combinations before releasing any ROM, .
However I want to have some fun updating the kernel on the GC GBE 1.9 that I currently have on my charge with couple other kernels out there....
Will see if I create some magic
Click to expand...
Click to collapse
don't use froyo kernels with GB (as of right now there's only one custom GB kernel, navenedrobs nameless ext4 one), it will just lead to a soft bricked phone... i could be wrong but i think imnuts and imoseyon from team gummy are working on some GB kernel awesomeness
blazing through on my VZ Droid Charge 4G
What about the noop, fifo, bfq, vr options? What do these mean?
Sent from my gummycharged SCH-I510 using XDA Premium App
gdubya34 said:
What about the noop, fifo, bfq, vr options? What do these mean?
Sent from my gummycharged SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
Don't touch them. They will either make your phone crawl or have FCs. It hasn't been implemented in the kernel yet.
Sent from my Droid Charge running GummyFroyo 1.9.1
kvswim said:
Don't touch them. They will either make your phone crawl or have FCs. It hasn't been implemented in the kernel yet.
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
Oh crap, I am not sure what one it was on when I installed it. I think I changed it by accident. right now it is on the vr setting.
Are there any setting s to avoid when messing with the voltage control, and if I delete the app does go back to the default settings?
gdubya34 said:
Oh crap, I am not sure what one it was on when I installed it. I think I changed it by accident. right now it is on the vr setting.
Are there any setting s to avoid when messing with the voltage control, and if I delete the app does go back to the default settings?
Click to expand...
Click to collapse
To avoid: IO schedulers, overvolting (only done in Extreme), and going above 1400 mhz, as 1500 & 1600 are HEAVILY overvolted. Toasted processors=bad magic.
However, you can switch the governers from conservative to performance, but its kind of useless.
If you delete the app it will NOT go back to default...I think. The default io scheduler for imoseyon's kernel is deadline, I forgot what PBJ's is. If you switched it and its still working, don't worry about it.
Sent from my Droid Charge running GummyFroyo 1.9.1
I am using Tsugi 2.3.4 with the Oyasumi 0.1 UV kernal I want to overclock to 1500 but what settings should I undervolt it to that is stable thanks in advance for the info.
DirtyPISTOLA said:
I am using Tsugi 2.3.4 with the Oyasumi 0.1 UV kernal I want to overclock to 1500 but what settings should I undervolt it to that is stable thanks in advance for the info.
Click to expand...
Click to collapse
We can't tell you not all phones are the same, uv a little (10 or 25) run it for a day or two see how it acts, if its steady, uv a little more, when it starts acting up thats your limit go back to previous settings.
NVIDIA NEVER AGAIN!
fcisco13 said:
We can't tell you not all phones are the same, uv a little (10 or 25) run it for a day or two see how it acts, if its steady, uv a little more, when it starts acting up thats your limit go back to previous settings.
NVIDIA NEVER AGAIN!
Click to expand...
Click to collapse
Alright thanks will try
Sent from my LG-P999 using Tapatalk
I've seen some general advice not to UV for anything over 1ghz speeds as well, but it may not hurt to try if you want and adjust as needed for stability.
I'm running on a -75mv at 1.5Ghz faux kernel 0.4.7..
Perfectly stable, benchmarked AnTuTu, Quadrant, and all those other good stuff.
I have not tried -100mv yet, I doubt it will be stable.
Every phone is different, but I run mine at -20 up to 1 G, and -10 for the rest.
Mine I cant undervolt shoot I have to keep my minimum frequency at 500 to be stable, course I can also run at 1.5 all day (I keep it at 1.2).
Well I guess I can't say I cant UV since I use pimp my cpu and it only gives you options in 25 increments, maybe I would be stable at like -10. But coming from my galaxy s 4g where I could UV over -150 and still be stable, that just doesnt even sound worth doing.
Edit: I just thought about it and maybe the reason I cant UV (more) is because I'm using fauxs pre UV/OC kernel, so I dont even know what stock voltage is. But comparing to my sgs4g at stock voltage I am running considerably lower voltages on the g2x.
The faux thread says it's pre uv at -50 across the board.
Beekersguy said:
The faux thread says it's pre uv at -50 across the board.
Click to expand...
Click to collapse
I been running it so long and flashed so many friends phones I can't even remember details anymore!
Sent from my LG-P999 using xda premium
I have installed rooted stock FP1 with voodoo lagfix and the PBJ 5/24 kernel installed... what else should i do to speed this puppy up....
I would recommend the tweaked rom.
Sent from my handheld Linux computer using electromagnetic radiation.
I recommend not making a new thread just for this.
Sent from my SCH-I510 using xda premium
What launcher is in tweaked Rom.. I love touch wiz... Which is why im asking... Also what the best overclock app to use.. is it setcpu?
Sent from my SCH-I510 using Tapatalk 2
miguel11691 said:
What launcher is in tweaked Rom.. I love touch wiz... Which is why im asking... Also what the best overclock app to use.. is it setcpu?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
Wow that's a first but yeah tweaked has tw launcher ad default. Also voltage control is free and works fine for oc/uv.
Sent from my handheld Linux computer using electromagnetic radiation.
SetCPU works for OC/UV, but I find it much less intuitive than Voltage Control.
JihadSquad said:
Wow that's a first but yeah tweaked has tw launcher ad default. Also voltage control is free and works fine for oc/uv.
Sent from my handheld Linux computer using electromagnetic radiation.
Click to expand...
Click to collapse
what is a first.... and does someone have th ebest settings for VC.. i just always overlcocked... never messed with voltage
miguel11691 said:
what is a first.... and does someone have th ebest settings for VC.. i just always overlcocked... never messed with voltage
Click to expand...
Click to collapse
Someone liking TouchWiz
100MHz: -100
200MHz: -100
400MHz: -100
800MHz: -75
1000MHz: -50
Those seem to be good starting points for most people...most phone seem to be stable at that. You can continue experimentally reducing it from there. Some processors handle it better than others (mine can go lower than that pretty much across the board but some can't). The worst that happens is that it's unstable and randomly reboots...you aren't going to permanently hurt it by undervolting.
For higher frequencies, it's more down to experimentation. When you get into the overclocking ranges, it gets really individual to the processor.
wow, I thought nobody liked TouchWiz.
My setup:
-Tweaked ROM
-PBJ kernel (NOT using EXT4...it always makes my phone run very sluggishly)
-The SQL cleanup script found here: http://rootzwiki.com/topic/25072-sqlite3-phone-is-snappier-than-ever/ (I really have nothing but anecdotal evidence but I'm overly convinced that this helps)
-Autokiller memory manager app set to the "Strict" preset. imnuts's new kernel (524) makes similar changes to the values that AKM changes, but "Strict" is slightly higher (60/70/80 vice 50/60/70) and I find it to work better for my phone. The next highest setting seems to be working too much to kill things off, which also slows down the device. This seems to be the happy medium for my phone, YMMV.
-Overclocked to 1.2 using Voltage Control. This doesn't seem to effect my regular operations but I do notice a difference with more intense games (which I don't use very often). I can't go higher than 1.2 and my UV settings are more conservative than those listed in this thread.
-ADWex (the paid one) is the smoothest launcher I've used. I kept hearing this for the longest time but my experience with the trial version was the opposite. Turns out, they are totally different. Give it a shot. ADW has some neat features, too.
-Also make sure you go through and debloat as far as you can. For instance, I only use gmail but the stock email app will always run in the background and eat up RAM...so I uninstalled it. Since I don't use things like the TW launcher or the TW calculator (Realcalc is a better, free alternative), they're gone, regardless of whether it makes a difference to my experience. I'm also a FB user and the official FB app will eat RAM in the background regardless of your sync and alert settings. Friendcaster won't, so I use it (disclosure: I only have the app so I can share things like photos. For status updates and browsing I just use the mobile site in the browser). People will argue, especially when the topics of task killers comes up, that Android handles its own memory management great. It largely does, but this phone is very susceptible to bogging down when you get to the upper limits of RAM usage. That's why I believe changing the minfree values in AKM is so important, an improvement that is maximized by getting rid of superfluous RAM eating processes. Obviously, the more crap you have on your homescreen, the more resources it takes to run your homescreen. Do what you're comfortable with.
My phone is running really well for me right now. I hope you can get the same enjoyment out of yours.
Thanks a lot...
Sent from my SCH-I510 using Tapatalk 2
BleedsOrangeAndBlue took my recommendation to install sqlite but i actually use different OC/UV settings:
100mhz -200
200mhz -150
400mhz -125
800mhz -100 (i'm underclocked at 800 right now and have no issues besides games)
1000mhz -75
1200mhz -50
also I recommend tweaked2.1 because the included tweaktools script comes with a lot of good kernel tweaks like darkly zip-align and renice which speed up application use
also use an auto cache cleaner with the sqlite cleaner because that lowers lag as well
My setup: 100Mhz -200
200Mhz -100
400Mhz - 75
800Mhz -125
1000Mhz - 50
1200Mhz -50
1300Mhz -25
SetCPU: ondemand, sio, up treshold 97, sampling rate 100000
Profiles: screen off- 100 to 200Mhz at 75
In call - 100 to 1000Mhz at 80
Screen unlocked - 100 to 1300Mhz at 99
This works for me. If I put the 200 or 400Mhz any lower my music player stars skipping. Music player mostly uses the 200 n 400Mhz while video n Netflix uses 800Mhz CPU speeds. Its what I noticed. Also am on Tweeked 2.1 with PBJ 524 n this http://forum.xda-developers.com/showthread.php?t=1684997. On Antutu with this setup my score was 3171 I ran it just b4 I posted this. But my best score was 3404 but I forgot what setup I had for that. Anyway this seems to b fast n smooth so I'll stick wirh it, for a while.
p2kmafia said:
BleedsOrangeAndBlue took my recommendation to install sqlite
Click to expand...
Click to collapse
I truly appreciate it, too! It really makes my phone run much smoother and with a widget on my "Utilities" screen for it, I can get back up to speed with one push in less than a minute.
Thanks for the UV settings. I don't underclock, but I do run the conservative governor to stay on lower settings more of the time. I could probably be more aggressive with some of my lower settings, I think I'm going to play around with them now.
---------- Post added at 08:08 AM ---------- Previous post was at 08:06 AM ----------
Lehocki said:
Music player mostly uses the 200 n 400Mhz while video n Netflix uses 800Mhz CPU speeds. Its what I noticed.
Click to expand...
Click to collapse
This could vary based on your governor settings, too. For instance, if I'm using ondemand, Pandora will use my max clock speed most of the time. If I use conservative, it flickers between 200 and 400.
Just putting that out there so you can further optimize if need-be. I've become a bit of a battery fanatic recently.
" This could vary based on your governor settings, too. For instance, if I'm using ondemand, Pandora will use my max clock speed most of the time. If I use conservative, it flickers between 200 and 400."
Yes that is why I have the sampling rate at 100000. It is my stable setting , but the 80000 also works fine and 60000 I also notice some skips but not as much as with the 40000 setting
BleedsOrangeandBlue said:
wow, I thought nobody liked TouchWiz.
My setup:
-Tweaked ROM
-PBJ kernel (NOT using EXT4...it always makes my phone run very sluggishly)
...
Click to expand...
Click to collapse
It's no longer sluggish. The problem has been solved and it's noticeably faster than non EXT4. You should try it.
Ted A said:
It's no longer sluggish. The problem has been solved and it's noticeably faster than non EXT4. You should try it.
Click to expand...
Click to collapse
do you have a link to the fixed version? I did it with the TonsitPBJ ext4 converter package for tweaked 2.1 and it was awful... not to say that its anyone's fault, this is consistent with every ext4 conversion I've ever done.
I posted a method in rootzwiki http://rootzwiki[dot]com/topic/24729-recommend-conversion-to-ext4/
it is a little tedious but if the method you used did not work well I recommend this method because I had no problems during or after the conversion.
So basically this is a general discussion or chit chatting for all of you about which governer is better ,best etc. I/O schedulers etc.
You can also ask question, queries about your current settings is it good and etc.
There are also three sections in this post too. Recommended settings by me, Tested ones. And also ones that I am testing. Those that I have tested have my remarks on them too
RECOMMENDED
Here are my recommended No-Frills CPU settings:
Max:1200
Min:300
Gov. InteractiveX(Gives a lot of performance boost and also battery friendly)
I/O: BFQ(Im now checking out other IO schedulers after found a good or better one i will update )(and also Because it fixes this issue.)
These are the setting that gives me the best/positive results on my unit. I do not OC as I see no obvious differences in speed as these settings are already more than good enough. And furthermore OC will decrease the life of the device so no point.
TESTED
I have tested these:
Max:1200
Min: 300
Gov: Smartassv2
IO: SIO
Remarks: I have tested these and I must say the performance and battery life was almost as good as those of the recommended settings These do perform almost the same as the recommended ones but battery wise is definitely an out for these if compared to the recommended one. I personally would still recommend and prefer those in the recommended section as both almost perform the same and this is more unbattery friendly.
TESTING
This are the settings that I am testing now:
Max: 1000
Min: 300
Gov: Conservative
IO: Noop
Remarks: So as usual, I will test and report back after about a week. As of now, performance wise, these really lose out to all the others that are present in this post. But battery wise its definitely a clear winner
SHORT VIDEO THAT I FOUND ON YOUTUBE
As usual, DO ANY CHANGES TO YOUR PHONE AT YOUR OWN RISK
Enjoy! And I hope that this thread has been helpful for you.
Reference: http://forum.xda-developers.com/showthread.php?t=1242323. Also, I believe many threads like this have been made . To me, everyone's experience is not entirely the same, therefore this would only help to a certain extend .
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
bscraze said:
Reference: http://forum.xda-developers.com/showthread.php?t=1242323. Also, I believe many threads like this have been made . To me, everyone's experience is not entirely the same, therefore this would only help to a certain extend .
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Click to expand...
Click to collapse
Hmmm... havent really seen one around in I9003 forums tho. And seen alot of discussion about this in dev thread so...
crazbanditz said:
Hmmm... havent really seen one around in I9003 forums tho. And seen alot of discussion about this in dev thread so...
Click to expand...
Click to collapse
Just Google 'best governor'/best scheduler/best governor and scheduler.
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
first i have to say that there are big differences in CPU-Tools... i got myself cpumaster,nofrills and finally setcpu... cpumaster made my phone laggy even with lionheartgovernors and stuff...nofrills has no support for different profiles...so i highly recommend invest the little mlney for the incredible setcpu. basically i use smartassV2 at 1000mhz min 300mhz with sio scheduler...and then much profiles like change to vr scheduler when playing videos or in call 600mhz max or at night when i sleel keep the phone at 300mhz max; )
Sent from my GT-I9003 using XDA
Hi. I was just wondering... Do Kernel Govs and I/O selections match well with V6 Supercharger? Or is it better to supercharge with a stock kernel?
Sorry for the noob question. Im just concerned if its possible that all these mods im applying might be cancelling out each other at some point... Or worse might be contradicting each other too...
Sent from my Galaxy SL with CM9A6, Vurrut Kernel v17 & V6 Supercharged.
hpog said:
Hi. I was just wondering... Do Kernel Govs and I/O selections match well with V6 Supercharger? Or is it better to supercharge with a stock kernel?
Sorry for the noob question. Im just concerned if its possible that all these mods im applying might be cancelling out each other at some point... Or worse might be contradicting each other too...
Sent from my Galaxy SL with CM9A6, Vurrut Kernel v17 & V6 Supercharged.
Click to expand...
Click to collapse
Nope they don't they do different things . Supercharger manages minfree values while governors and schedulers manage the CPU speed
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
felixchris said:
first i have to say that there are big differences in CPU-Tools... i got myself cpumaster,nofrills and finally setcpu... cpumaster made my phone laggy even with lionheartgovernors and stuff...nofrills has no support for different profiles...so i highly recommend invest the little mlney for the incredible setcpu. basically i use smartassV2 at 1000mhz min 300mhz with sio scheduler...and then much profiles like change to vr scheduler when playing videos or in call 600mhz max or at night when i sleel keep the phone at 300mhz max; )
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
Umm smart ass v2 has built in screen off profiles if I'm not wrong.
Cheers
Sent from my GT-i9003 powered by RemICS S III-looking rom!
bscraze said:
Umm smart ass v2 has built in screen off profiles if I'm not wrong.
Cheers
Sent from my GT-i9003 powered by RemICS S III-looking rom!
Click to expand...
Click to collapse
It does
Updated op with testing status
Does oc to 1.1 ghz drains the same amount of battery as oc to 1.3ghz ?? Can i use screen off profile in set cpu with conservative 300 mhz max and 300 mhz min ?? will it drain battery or improve battery ???
anuraagkochar said:
Does oc to 1.1 ghz drains the same amount of battery as oc to 1.3ghz ?? Can i use screen off profile in set cpu with conservative 300 mhz max and 300 mhz min ?? will it drain battery or improve battery ???
Click to expand...
Click to collapse
This is my recommendation for SetCPU max 1200 min 300 gov interactiveX io:BFQ When asleep profile: Max 600 min 300 gov and io same as above
Press thanks if this helped
Updated OP with alot of changes Including the new section guide and also the tested section as well as remarks to help people with choosing their settings
Gv smartassv2 Io sio
Sent from my GT-I9003 using Tapatalk
juanra88 said:
Gv smartassv2 Io sio
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Ermmmm... Sorry why are you saying that all of a suddden?
Press Thanks if I helped
In my opinion, this topic is kinda useless.
I know and i respect your effort, but these settings really depend on the user and how they use the device.
If i try the same settings and try it myself, i will probably have another opinion and other results.
Benchmarks mean nothing.
Also many other threads all over XDA were made to explain governors and I/O schedulers, and users can simply Google it and read, then chose what suits them.
Skander1998 said:
In my opinion, this topic is kinda useless.
I know and i respect your effort, but these settings really depend on the user and how they use the device.
If i try the same settings and try it myself, i will probably have another opinion and other results.
Benchmarks mean nothing.
Also many other threads all over XDA were made to explain governors and I/O schedulers, and users can simply Google it and read, then chose what suits them.
Click to expand...
Click to collapse
Yea... but this is particularly for our device and I did do a remarks section to what is better for performance and battery. So that the user will better know which one suits them I didnt mention anything about benchmarks... right?
Press Thanks if I helped
crazbanditz said:
Yea... but this is particularly for our device and I did do a remarks section to what is better for performance and battery. So that the user will better know which one suits them I didnt mention anything about benchmarks... right?
Press Thanks if I helped
Click to expand...
Click to collapse
The benchmarks note was for other people, it's in another line
Also, it doesn't matter if it's for our device or not, the topic give YOU the best results, others will probably have to test themselves, so i still see no point in this.
However, i am just saying my opinion, good luck
Skander1998 said:
The benchmarks note was for other people, it's in another line
Also, it doesn't matter if it's for our device or not, the topic give YOU the best results, others will probably have to test themselves, so i still see no point in this.
However, i am just saying my opinion, good luck
Click to expand...
Click to collapse
Okay. But it will still save people from going off topic in devs thread...
which kernel r u using? bam v14 doesnt have interactivex !!
Is it bfq or cfq?
And should I choose performance over conservative in voltage control?
I always got kernel panic when I undervolted, too.
Sent from my Saurom'd Infuse
I always left my infuse CPU/voltage at stock settings....never had any probs and the phone was fast enough and lasted me the day...not that is helpful for you question...but if I were you I wouldnt mess with CPU and voltage...but that's just me
Sent from my HTC PH39100 using Tapatalk 2
Crinkypops said:
Is it bfq or cfq?
And should I choose performance over conservative in voltage control?
I always got kernel panic when I undervolted, too.
Sent from my Saurom'd Infuse
Click to expand...
Click to collapse
I have been using cfq with ondemand, and undervolt 50 mV each not much but its stable. Performance setting will kill your battery.
I was under the impression that noop is theoretically the best I/O scheduler for flash devices, but I can't find any good benchmarks comparing its performance to the others in a typical real world smartphone workload.
Btw I don't consider using "time dd" to be very helpful in replicating a real world multitasking workload. What's the point of testing a scheduler with a single file read or write? You may or may not have background processes reading or writing at the time of the test, but you wouldn't necessarily know it. As such, I would take any single threaded I/O benchmarks or simple tests with a grain of salt, even on a smartphone.
If someone with more knowledge of smartphone I/O access patterns sees a need to correct me on this, I would appreciate it. I'm an experienced *nix admin, but pretty much still a noob regarding android.
Sent from my SGH-I997 using xda app-developers app