I have installed rooted stock FP1 with voodoo lagfix and the PBJ 5/24 kernel installed... what else should i do to speed this puppy up....
I would recommend the tweaked rom.
Sent from my handheld Linux computer using electromagnetic radiation.
I recommend not making a new thread just for this.
Sent from my SCH-I510 using xda premium
What launcher is in tweaked Rom.. I love touch wiz... Which is why im asking... Also what the best overclock app to use.. is it setcpu?
Sent from my SCH-I510 using Tapatalk 2
miguel11691 said:
What launcher is in tweaked Rom.. I love touch wiz... Which is why im asking... Also what the best overclock app to use.. is it setcpu?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
Wow that's a first but yeah tweaked has tw launcher ad default. Also voltage control is free and works fine for oc/uv.
Sent from my handheld Linux computer using electromagnetic radiation.
SetCPU works for OC/UV, but I find it much less intuitive than Voltage Control.
JihadSquad said:
Wow that's a first but yeah tweaked has tw launcher ad default. Also voltage control is free and works fine for oc/uv.
Sent from my handheld Linux computer using electromagnetic radiation.
Click to expand...
Click to collapse
what is a first.... and does someone have th ebest settings for VC.. i just always overlcocked... never messed with voltage
miguel11691 said:
what is a first.... and does someone have th ebest settings for VC.. i just always overlcocked... never messed with voltage
Click to expand...
Click to collapse
Someone liking TouchWiz
100MHz: -100
200MHz: -100
400MHz: -100
800MHz: -75
1000MHz: -50
Those seem to be good starting points for most people...most phone seem to be stable at that. You can continue experimentally reducing it from there. Some processors handle it better than others (mine can go lower than that pretty much across the board but some can't). The worst that happens is that it's unstable and randomly reboots...you aren't going to permanently hurt it by undervolting.
For higher frequencies, it's more down to experimentation. When you get into the overclocking ranges, it gets really individual to the processor.
wow, I thought nobody liked TouchWiz.
My setup:
-Tweaked ROM
-PBJ kernel (NOT using EXT4...it always makes my phone run very sluggishly)
-The SQL cleanup script found here: http://rootzwiki.com/topic/25072-sqlite3-phone-is-snappier-than-ever/ (I really have nothing but anecdotal evidence but I'm overly convinced that this helps)
-Autokiller memory manager app set to the "Strict" preset. imnuts's new kernel (524) makes similar changes to the values that AKM changes, but "Strict" is slightly higher (60/70/80 vice 50/60/70) and I find it to work better for my phone. The next highest setting seems to be working too much to kill things off, which also slows down the device. This seems to be the happy medium for my phone, YMMV.
-Overclocked to 1.2 using Voltage Control. This doesn't seem to effect my regular operations but I do notice a difference with more intense games (which I don't use very often). I can't go higher than 1.2 and my UV settings are more conservative than those listed in this thread.
-ADWex (the paid one) is the smoothest launcher I've used. I kept hearing this for the longest time but my experience with the trial version was the opposite. Turns out, they are totally different. Give it a shot. ADW has some neat features, too.
-Also make sure you go through and debloat as far as you can. For instance, I only use gmail but the stock email app will always run in the background and eat up RAM...so I uninstalled it. Since I don't use things like the TW launcher or the TW calculator (Realcalc is a better, free alternative), they're gone, regardless of whether it makes a difference to my experience. I'm also a FB user and the official FB app will eat RAM in the background regardless of your sync and alert settings. Friendcaster won't, so I use it (disclosure: I only have the app so I can share things like photos. For status updates and browsing I just use the mobile site in the browser). People will argue, especially when the topics of task killers comes up, that Android handles its own memory management great. It largely does, but this phone is very susceptible to bogging down when you get to the upper limits of RAM usage. That's why I believe changing the minfree values in AKM is so important, an improvement that is maximized by getting rid of superfluous RAM eating processes. Obviously, the more crap you have on your homescreen, the more resources it takes to run your homescreen. Do what you're comfortable with.
My phone is running really well for me right now. I hope you can get the same enjoyment out of yours.
Thanks a lot...
Sent from my SCH-I510 using Tapatalk 2
BleedsOrangeAndBlue took my recommendation to install sqlite but i actually use different OC/UV settings:
100mhz -200
200mhz -150
400mhz -125
800mhz -100 (i'm underclocked at 800 right now and have no issues besides games)
1000mhz -75
1200mhz -50
also I recommend tweaked2.1 because the included tweaktools script comes with a lot of good kernel tweaks like darkly zip-align and renice which speed up application use
also use an auto cache cleaner with the sqlite cleaner because that lowers lag as well
My setup: 100Mhz -200
200Mhz -100
400Mhz - 75
800Mhz -125
1000Mhz - 50
1200Mhz -50
1300Mhz -25
SetCPU: ondemand, sio, up treshold 97, sampling rate 100000
Profiles: screen off- 100 to 200Mhz at 75
In call - 100 to 1000Mhz at 80
Screen unlocked - 100 to 1300Mhz at 99
This works for me. If I put the 200 or 400Mhz any lower my music player stars skipping. Music player mostly uses the 200 n 400Mhz while video n Netflix uses 800Mhz CPU speeds. Its what I noticed. Also am on Tweeked 2.1 with PBJ 524 n this http://forum.xda-developers.com/showthread.php?t=1684997. On Antutu with this setup my score was 3171 I ran it just b4 I posted this. But my best score was 3404 but I forgot what setup I had for that. Anyway this seems to b fast n smooth so I'll stick wirh it, for a while.
p2kmafia said:
BleedsOrangeAndBlue took my recommendation to install sqlite
Click to expand...
Click to collapse
I truly appreciate it, too! It really makes my phone run much smoother and with a widget on my "Utilities" screen for it, I can get back up to speed with one push in less than a minute.
Thanks for the UV settings. I don't underclock, but I do run the conservative governor to stay on lower settings more of the time. I could probably be more aggressive with some of my lower settings, I think I'm going to play around with them now.
---------- Post added at 08:08 AM ---------- Previous post was at 08:06 AM ----------
Lehocki said:
Music player mostly uses the 200 n 400Mhz while video n Netflix uses 800Mhz CPU speeds. Its what I noticed.
Click to expand...
Click to collapse
This could vary based on your governor settings, too. For instance, if I'm using ondemand, Pandora will use my max clock speed most of the time. If I use conservative, it flickers between 200 and 400.
Just putting that out there so you can further optimize if need-be. I've become a bit of a battery fanatic recently.
" This could vary based on your governor settings, too. For instance, if I'm using ondemand, Pandora will use my max clock speed most of the time. If I use conservative, it flickers between 200 and 400."
Yes that is why I have the sampling rate at 100000. It is my stable setting , but the 80000 also works fine and 60000 I also notice some skips but not as much as with the 40000 setting
BleedsOrangeandBlue said:
wow, I thought nobody liked TouchWiz.
My setup:
-Tweaked ROM
-PBJ kernel (NOT using EXT4...it always makes my phone run very sluggishly)
...
Click to expand...
Click to collapse
It's no longer sluggish. The problem has been solved and it's noticeably faster than non EXT4. You should try it.
Ted A said:
It's no longer sluggish. The problem has been solved and it's noticeably faster than non EXT4. You should try it.
Click to expand...
Click to collapse
do you have a link to the fixed version? I did it with the TonsitPBJ ext4 converter package for tweaked 2.1 and it was awful... not to say that its anyone's fault, this is consistent with every ext4 conversion I've ever done.
I posted a method in rootzwiki http://rootzwiki[dot]com/topic/24729-recommend-conversion-to-ext4/
it is a little tedious but if the method you used did not work well I recommend this method because I had no problems during or after the conversion.
Related
So I've been searching the forums for a good thread on optimizing setcpu for specifically the Mytouch 4G. I couldn't find one so after i read up on it i created this profile. The tweaks that I've found make this run very fast and gets me easily 18 hours of battery life, and that is with moderate usage. These setting should work for most if not all devices. I don't get any real noticeable lag even when turning the screen on. I'm Using SetCPU 2.1.0 on a Grankin01 Kernel on a Stock ROM, and I'm also using "Autokiller Memory Optimizer" using moderate preset. Hopefully people will post there profiles anyway here it is.
Here is the thread for the Kernel I'm usinghttp://forum.xda-developers.com/showthread.php?t=876848
and here is a link for setcpu basics.
http://androidforums.com/evo-4g-all-things-root/210253-setcpu-guide.html
Alright here are my most recent setting I've been running.
I get around 20 hours of battery life on my phone with moderate use my set CPU settings are
Overclocked to 1.5 ghz minimum 245 ghz
Battery below 30% Max 1 ghz min 245 ghz
Screen off max 245 ghz min 245 ghz
Latest Cyanogen mod Alpha 7.0
I use max 1113 min 245 scaling on demand...screen off min 245 max 350
MT4G + CM7
Pretty sure this is in the wrong place. I guess you read up on everything except where would an appropriate place to post this be.
Sent from my MT4G running Gingerbread
I get 24hrs if I put my phone away! 6hrs on average lol. Cm7 stock kernel. Grankins breaks youtube everytime. Screen off 328 max 248 min. On demand.
Sent from my HTC Glacier using XDA App
With all the CM7 flashing, I get about 12-15hrs with 149760-245760
Sent from my Gridlocks' CM7 MT4G using XDA App
stlouie65 said:
With all the CM7 flashing, I get about 12-15hrs with 149760-245760
Sent from my Gridlocks' CM7 MT4G using XDA App
Click to expand...
Click to collapse
louie i dont know what to make of your preset here... Either you are running your phone incredibly slowly or you have forgotten a 0 on the end and are crazy OCing it...
Have mine set at 76800-1113600 on demand and I demand a lot and average about 8hrs. CM7, zinx kernel,with superpower.
I've been trying to get profiles and triggers down except I use CPU tuner inserted of setcpu. Is it possible to over clock yet still save battery? I doubt that somehow lol. If anyone can post full settings that save battery but still runs well I'd appreciate it. Ill copy one of you guys.
Questions though. What is all the governor stuff like performance, conservative, on demand, etc? What are the thresholds? What are the min max standards? Like if I have 300 and 1500, which does it user and why? Those are the only things I can't grasp
Sent from my HTC Glacier using XDA App
xFate said:
I've been trying to get profiles and triggers down except I use CPU tuner inserted of setcpu. Is it possible to over clock yet still save battery? I doubt that somehow lol. If anyone can post full settings that save battery but still runs well I'd appreciate it. Ill copy one of you guys.
Questions though. What is all the governor stuff like performance, conservative, on demand, etc? What are the thresholds? What are the min max standards? Like if I have 300 and 1500, which does it user and why? Those are the only things I can't grasp
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Check out this link it has all you'll need to know http://androidforums.com/evo-4g-all-things-root/210253-setcpu-guide.html
What you want is your device to throttle based on the load being put on it. When you aren't doing much i.e. reading a text it should be clocked at 245760 for example because that's not a demanding task. and versely when you play a graphics intensive app or something, it should use just over the maximum amount of cpu power needed to run the app so the app runs smooth. but wont waste battery by overclocking to 1708800 when only a speed of 1017600 is needed. For this i use "conservative" on SetCPU because it will allow more customization.
My advanced settings for SetCPU are as follow. i haven't use CPU Tuner but hopefully it's similar.
Sample Rate you want kinda low 200000 is what i have and i don't get much if any lag.
Up Threshold is at what percentage of processor usage that the clock speed is increased. for me its set to 60. in other words at 60% load on the processor it will start to increase the clock speed.
Down Threshold is the load percentage where the clock speed will be reduced. i have mine set to 33.
Ignore Nice Load will just ignore nice processes. This includes system i believe. i have mine set to 0.
Grabbed this from a mac forum but it should apply.
"A process's priority is determined with a complex formula that includes what the process is doing and how much CPU time the process has already consumed. A special number, called the nice number or simply the nice, biases this calculation: the lower a process's nice number, the higher its priority, and the more likely that it will be run."
Frequency Step is how much of a jump the CPU will take to meet the load. mine is set low, (12) because most processes and apps wont need a whole lot of boost to run smoothly. For my device on average it will be under 768000 which is what you want and is where the battery saving really comes in. Because the CPU is under-clocked most the time its using a lot less battery but is still running everything smoothly.
A lot of people set there devices to ondemand because it's, "very responsive." although true its responsiveness comes from big steps in clock speed as opposed to the small ones that will most likely get the same job done. i.e. a clock speed of 902400 is more then enough to run the process quickly ondemand will jump to 1708800 to handle the same task.
copied from the above link at android forums.
" * ondemand - Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
* conservative - Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
* performance - Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking.
* powersave - Available in some kernels. It will keep the CPU running at the "min" set value at all times.
* userspace- A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor."
Please post in General section, not dev.
Well i changed my setting a little to be a bit more responsive and i haven't noticed a increase in battery usage. I set my max speed to 1516800 and min to 368640 and its running quite nicely.
Anyone else getting good result with the conservative setting?
Keldarr said:
So I've been searching the forums for a good thread on optimizing setcpu for specifically the Mytouch 4G. I couldn't find one so after i read up on it i created this profile. The tweaks that I've found make this run very fast and gets me easily 18 hours of battery life, and that is with moderate usage. I don't get any real noticeable lag even when turning the screen on. I'm Using a Grankin01 Kernel and I'm also using "Autokiller Memory Optimizer" using moderate preset. Hopefully people will post there profiles anyway here it is.
Here is the thread for the Kernel I'm usinghttp://forum.xda-developers.com/showthread.php?t=876848
and here is a link for setcpu basics.
http://androidforums.com/evo-4g-all-things-root/210253-setcpu-guide.html
Edit: I've been using my phone for the last 12 hours I unplugged it this morning and have only plugged it in to pull a screen shots with android commander then unplugged it and my battery is at 53% I've watch youtube, txt, made calls, taken pictures ect, ect normal crap, and its running strong. I've made small adjustments on some of my thresholds but they are mostly similar.
Click to expand...
Click to collapse
What version of SetCPU are you using? In mine I don't have the threshold for down, and my sampling rates are way different. Mine is set as from install at 50000. Running cm7alpha.
Using 2.1.0 and I have all the mentioned settings Bob
bobsbbq said:
What version of SetCPU are you using? In mine I don't have the threshold for down, and my sampling rates are way different. Mine is set as from install at 50000. Running cm7alpha.
Click to expand...
Click to collapse
Sent from my stickie key HTC Glacier using XDA App
Is there a way to change voltage? Frequency rules saves are minumum on cellphones.
I'm using Setcpu 2.1.0 and I'm using a stock OC Kernel from Grankin01 and u have to set the profile to conservative.
NovoRei said:
Is there a way to change voltage? Frequency rules saves are minimum on cellphones.
Click to expand...
Click to collapse
Frequency rules saves do save a lot of battery. Combine with undervolting and memory optimizations and you'll get big saves. But no setcpu is solely for cpu settings.
Whats the most stable speed to run this at?
So far i haven't had any stability issues on the Grankin01 Kernel. They ironed out most the stability issues in the Kernel its self. I do however keep my main profile around 1708800 - 1516800, generally 1516800, and min is set to 368640 and I've had no problem not even a signal freeze or crash. I've also run at 1708800 for most of the day plugged in and no issues other then heat. So i think is up to mostly prefrence.
I'm using a stock rom with bloatware removed and as i mentioned the Grankin01 1.7 OC Kernel.
Here is what I'm talking about. Sometimes the auto detect or something is wrong and I get this screen instead of the one you get. I don't understand why. I change ROMS a lot and I don't know if it is ROM specific or not. I'm currently on the cm7 preview from Zinx. Although I have seen it on other ROMS also as I posted before. Here is a pic.
Ignore the dropcap2 as I had just used it to take the picture.
bobsbbq said:
Here is what I'm talking about. Sometimes the auto detect or something is wrong and I get this screen instead of the one you get. I don't understand why. I change ROMS a lot and I don't know if it is ROM specific or not. I'm currently on the cm7 preview from Zinx. Although I have seen it on other ROMS also as I posted before.
Click to expand...
Click to collapse
Looks like from your screen shot that the profile SetCPU is using is on On demand, interactive or some default. What Kernel are you using? that may be the issue. If not a kernel issue. Then it may be a issue with CM7 and how SetCPU interacts with it. try disabling all your profiles and make sure that your main profile is for sure set to conservative.
Nothing else make a backup and try a different Kernel. Grankin01 has a few great ones and even a CM7 kernel with tunes and tweaks. As well as Gorilla. but id try the CM7 Kernel Grankin01 has first my buddy is running it and hasn't had problems. Just make you do a full backup to avoid a FUBAR situation.
http://forum.xda-developers.com/showthread.php?t=876848 Grankin01
http://forum.xda-developers.com/showthread.php?t=846451 Gorilla
Keldarr said:
Looks like from your screen shot that the profile SetCPU is using is on On demand, interactive or some default. What Kernel are you using? that may be the issue. If not a kernel issue. Then it may be a issue with CM7 and how SetCPU interacts with it. try disabling all your profiles and make sure that your main profile is for sure set to conservative.
Nothing else make a backup and try a different Kernel. Grankin01 has a few great ones and even a CM7 kernel with tunes and tweaks. As well as Gorilla. but id try the CM7 Kernel Grankin01 has first my buddy is running it and hasn't had problems. Just make you do a full backup to avoid a FUBAR situation.
http://forum.xda-developers.com/showthread.php?t=876848 Grankin01
http://forum.xda-developers.com/showthread.php?t=846451 Gorilla
Click to expand...
Click to collapse
You are right it was the main profile was set to on demand and when set to on demand these available options change.
As far as kerenls go I have not had good luck with Grankin CM Gingerbread kernels but he is working on a fix.
Read the thread before posting bugs or issues or questions
Table of contents:
Intro
Features/what this includes
Quirks of the kernel
Why it's labeled unstable
Disclaimer
Latest kernels
Methods of flashing
Benchmarks!
Instructions for using swap
Governor exlainations
Governor strategies
Recommended apps
Locating cpu% Eaters && other negative items towards battery life
FAQ!
Changelog
Stable/safe voltage kernels
Notes
Source
Credits
Old links, go here for other aosp roms with older video drivers & older builds
Intro: I'm scaryghoul
What this includes
It's scary!
Swap
Deadline I/o scheduler
Extreme undervolt
Overclocked & underclocked values
Sleepers disabled
Toast's new video drivers
Smartass governor
New Scary governor!
Tweaked conservative governor
and much more(All of toast's kernel)
Quirks of this kernel:
Sometimes when changing speeds with something like setcpu, they take a few seconds to actually clock to that speed, turning the screen on and off fixes it and clocks it right away though.
I would advise against using the speeds 66mhz->180mhz during real usage. It's a little laggy, but works =)
This doesn't work with sense based roms like mikshift, yes it needs to be said more than once
Why it's labeled unstable: So I don't get people poking me in the eyes with spoons if/when it freezes up. It actually works quite well, but since I heavily undervolted an undervolted kernel, it is bound to not be 100% stable(It is about 90% stable =P)
Disclaimer: What everyone else puts in kernel threads, about me not being responsible, ect.
Latest kernels
The voltages of the superUV will not work for everyone, if they don't work for you, then try the builds labeled stable
Recommended speeds 245-800mhz or 245-1ghz on scary governor && no setcpu profiles - I'll keep my current speeds in my signature.
Mirrors of kernels uploaded by VICODAN
Super SUV
http://www.mediafire.com/?47perl0d43n1nyr
Super Stable kernel
http://www.mediafire.com/?9qmtzuu35cpr8yz
Super Girly kernel
http://www.mediafire.com/?1s4z4y7bh78e04j
Methods of flashing
Joeykrim's "flashimage gui" app on the market using one of the zImage files from the zips. http://forum.xda-developers.com/showthread.php?t=1045797
Teamwin's "Kernel manager" app on the market. http://forum.xda-developers.com/showthread.php?t=1030500
Flashing via recovery using one of the zips here.
Benchmarks! - All done at 1.8ghz on cm7
Quadrant standard 1.1.7 - 3900 is the highest I've seen so far I believe.
Smartbench(2runs) - 2150/1850 - Mine were around there
Linpack(3runs) - 61, 63, 63 - These won't change much at all.
Instructions for using swap
For a swapfile do something like this.
dd if=/dev/zero of=$Swapfile bs=1048576 count=$Size
Where $Swapfile is the location of the file you want, and $Size is the amount of mb for swap you want to use.
Then type
mkswap $Path
swapon $Path
Replacing $Path/$Size with your own values of course, so if I wanted 20mb of swap I'd execute the commands
dd if=/dev/zero of=/sdcard/swapfile bs=1048576 count=20
mkswap /sdcard/swapfile
swapon /sdcard/swapfile
Governor exlainations
Toasty makes one transition to the max speed and stays there(benchmarks only usually)
Batterysave! sits at the bottom and when the cpu load increases past the threshhold it scales up to the next speed and takes another load sample and keeps doing that(best on battery life/performance ratio)
Ondemand sits at the bottom and when the cpu load increases past the threshhold, it scales ot the max speed then takes another load sample and scales down accordingly
Powersave makes one transition to the bottom speed and stays there
Smartass(Quoted from another author http://www.ziggy471.com/2010/11/07/smartass-governor-info ) - "is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works – by taking over the idle loop – is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the “old” minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 352Mhz (or if your min frequency is higher than 352 – why?! – it will cap it to your min frequency). Lets take for example the 528/176 kernel, it will sleep at 352/176. No need for sleep profiles any more!"
Scary - A new governor I wrote based on conservative with some smartass features, it scales accordingly to conservatives laws. So it will start from the bottom, take a load sample, if it's above the upthreshold, ramp up only one speed at a time, and ramp down one at a time. It will automatically cap the off screen speeds to 245Mhz, and if your min freq is higher than 245mhz, it will reset the min to 120mhz while screen is off and restore it upon screen awakening, and still scale accordingly to conservatives laws. So it spends most of its time at lower frequencies. The goal of this is to get the best battery life with decent performance. It will give the same performance as conservative right now, it will get tweaked over time.
Governor strategies
Conservative - Upthreshold 85, downthreshold 60
Smartass - Sleep max 245760Hz, Ramp up at 384000Hz at a time, up threshold 90, downthreshold 60
Scary - Upthreshold 80, down threshold 45, sleep max 245760Hz, sleep min, 122880Hz
Recommended apps =)
Nofrills - App to manage I/O scheduler, clock speeds & governors.
Adw ex or go launcher ex
Colorize widgets - Great widgets to replace the lpp ones for those converting to other launchers.
AppMonster(pro or free) - Great backup utility, automatically backs up all apps.(I like it better than TB)
GPS Status - Great application for finding satalites near you and helping get a quick lock.
Any go dev team app - Great dev team, all their apps are worth looking at.
Frequently asked questions
Question: My phone is boot looping/not booting on the released suv, what do I do?
Answer: Your phone cannot handle the super undervolted values, you will need to flash the stable undervolted kernel or girly kernel
Question: My phone's graphics are running really lagishly, why is this happening? It worked fine on version 1.4 and before.
Answer: You are likely running an outdated version of your rom not supporting the new video drivers in version 1.5+, you will need to roll back to v1.4 and before
Question: My phone is running slow on the batterysave or scary governors, what do I do?
Answer: Set your minimum speed higher, those governors spend a lot of time at the lowest values
Question: My wifi/wifitether and other stuff is broken and wasn't before I flashed your kernel
Answer: READ THE BIG BOLD STATEMENT AT THE TOP OF THE THREAD THAT SAYS THIS IS NOT FOR SENSE
Question: How do I flash this?
Answer: You probably shouldn't be flashing a kernel labeled unstable if you don't know how
Question: I'm not getting the amazing battery life/benchmark scores that others are getting
Answer: Well, every device is different, so you may not be able to score as high as some others, but you should get close at least, and the battery completely depends on usage patterns
Question: My phone can't clock to 1.8ghz, or some of the other higher values but does fine on the lower ones
Answer: Every device is different and not all can handle the same speeds/voltages, you are probably better off staying away from the higher speeds, I enabled the speeds but hope that you all are mature enough to handle them
Locating cpu% eating applications.
When in ADB shell type the following
top |grep app
or if your rom supports it htop is much better(Without grep, so just "htop")
Then look for items with high amounts of cpu% while the phone is idle.
changelog:
Release1:
Swap support enabled
Unlocked 1.6-1.8ghz
Superundervolted
Release 2(1.1):
Unlocked 3 new underclock values
Took the undervolt farther.
Release 3(1.2):
Added hw3d
Release 4(1.3):
Removed interactive governor since it only causes trouble
Overall undervolt taken farther. May be unstable for some
Release5(1.4)
Disabled sleepers
Changed kernel name
Added an alternative voltage kernel
Release 6(1.5)
Cleaned up the source
Updated to toastcfh's new video drivers, greatly improved video performance and fixed a lot of issues with aosp video. - Thanks toast =D
Release 7(1.6)
Still cleaning up source
Addeed smartass governor && tweaked it, Down thresh: 70, up: 90
Added a real kernel name
Added lulz
Added two new clock speeds && modified voltage table
Tweaked conservative governor(Should be less erradict now, so scaling less==less power consumption==Yay =D)
Release 8(1.7)
Added Scarygov 0.5
Removed userspace governor
Release 9(1.7.2)
Tweaked scarygov to 0.6, removing a bug
Release 10(1.7.3)
Fixed a lag issue on scary governor by slightly optimizing the code.
Tweaked smartass.
Release 11(1.8)
Optimized scary governor's code
Safe voltage kernels && Stable kernels(come here if you can't handle the super undervolt
NEW VIDEO DRIVERS
1.8
ScaryKernel 1.8 stable http://dl.dropbox.com/u/15373824/ScaryKernel1.8safe.zip
Girly Kernel 1.8 stable http://dl.dropbox.com/u/15373824/GirlyKernel1.8safe.zip
1.7.3
ScaryKernel v1.7.3 stable http://dl.dropbox.com/u/15373824/ScaryKernel1.7.3Stable.zip
v1.7.2
ScaryKernel v1.7.2 safe uv http://dl.dropbox.com/u/15373824/Scarykernel1.7v2Safe.zip
v1.6
[UNTESTED]1.8Ghz safe voltage no sleepers http://dl.dropbox.com/u/15373824/ScaryKernel1.6SafeJesusNoSleep.zip
v1.5
[UNTESTED]1.8Ghz safe voltage no sleepers http://dl.dropbox.com/u/15373824/Scarykernel1.5StableJesus.zip
[UNTESTED]1.5Ghz safe voltage no sleepers http://dl.dropbox.com/u/15373824/Scarykernel1.5StableNoJesus.zip
OLD VIDEO DRIVERS(1.4) - For roms that don't support the new video drivers.
1.5Ghz safe voltage kernel no sleepers http://dl.dropbox.com/u/15373824/ScarykernelSafe1.5NoSleepers.zip
1.5ghz safe voltage kernel, sleepers enabled http://dl.dropbox.com/u/15373824/ScarykernelSafe1.5Sleepers.zip
1.8ghz safe voltage kernel, no sleepers http://dl.dropbox.com/u/15373824/ScarykernelSafe1.8NoSleepers.zip
1.8ghz safe voltage kernel, sleepers enabled http://dl.dropbox.com/u/15373824/ScarykernelSafe1.8Sleepers.zip
Notes:
Nothing for now.
Here is the source code for this build. I'll try to maintain it, I have a lot of kernel sources, but this will always be the latest release code, unless I state otherwise.
https://github.com/Scaryghoul
Credits: Toastcfh/bcnice20 - For 99.8% of their kernel source.
Dogejcr/Preludedrew - For helping me get my laptop setup for kernel compiling.
Testers - For flashing this even though it says unstable :-X
JoesephMother - For helping me unlock the new lower clock values && other kernel related matters =)
x99percent - I used his middle clock speeds between the 3xx->7xx values as a base(edited voltages) as well as used his smartass source.
I just got my shifty two days ago from having the heroc. It took me a full five minutes to root the sob. This kernel clocking it to 1.8ghz is sick. Good job!
On my Gingerbreaded Evo-Shifted Premium XDA App.
Nice work again scaryghoul. Quadrant scores are very reflective of real-world performance in this case.
Awesome numbers coming off this kernel.
Quadrant = 3104
SmartBench 2011 = 2095/1887
SmartBench numbers were incredible!!!!
It was unstable for me.. 1.8 frozen my phone and it wouldn't even boot up when I tried 1.5
crump84 said:
It was unstable for me.. 1.8 frozen my phone and it wouldn't even boot up when I tried 1.5
Click to expand...
Click to collapse
Just curious but what rom?
Sent from my PG06100 using XDA App
I used 1.5 SUV no sleepers and the responsiveness of the screen lags while scrolling in adw. I flashed back to the stock #29 on N#32 and the lag is gone
Sent from my PG06100 using XDA Premium App
CrashV2010 said:
I just got my shifty two days ago from having the heroc. It took me a full five minutes to root the sob. This kernel clocking it to 1.8ghz is sick. Good job!
On my Gingerbreaded Evo-Shifted Premium XDA App.
Click to expand...
Click to collapse
Glad you can handle it.
smoothtaste said:
Nice work again scaryghoul. Quadrant scores are very reflective of real-world performance in this case.
Click to expand...
Click to collapse
Thanks =O
jjb61 said:
Awesome numbers coming off this kernel.
Quadrant = 3104
SmartBench 2011 = 2095/1887
SmartBench numbers were incredible!!!!
Click to expand...
Click to collapse
Thanks for sharing here =)
crump84 said:
It was unstable for me.. 1.8 frozen my phone and it wouldn't even boot up when I tried 1.5
Click to expand...
Click to collapse
What rom and which kernel....
threeFiftyLi said:
I used 1.5 SUV no sleepers and the responsiveness of the screen lags while scrolling in adw. I flashed back to the stock #29 on N#32 and the lag is gone
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
Interesting. Never had that issue, what range of speeds are you using?
JKILO said:
Just curious but what rom?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Scaryghoul said:
What rom and which kernel
Click to expand...
Click to collapse
The latest Cyanogen build, tried both Release 3 1.5ghz and Release3 1.8ghz. I downloaded them last night, I may have to tried the newest release.
crump84 said:
The latest Cyanogen build, tried both Release 3 1.5ghz and Release3 1.8ghz. I downloaded them last night, I may have to tried the newest release.
Click to expand...
Click to collapse
Kernels before 1.5 aren't meant for the newest Cm.
1.5+the testing ones with the New video drivers, are the ones meant for it.
Scaryghoul said:
Kernels before 1.5 aren't meant for the newest Cm.
1.5+the testing ones with the New video drivers, are the ones meant for it.
Click to expand...
Click to collapse
Well I guess that would explain why I was having issues..
crump84 said:
Well I guess that would explain why I was having issues..
Click to expand...
Click to collapse
Version 1.5+ is meant for cm7's nightlies from 31+.
When I first tried it, I felt a little lag but after I wiped it ran better than before.
Scaryghoul said:
Interesting. Never had that issue, what range of speeds are you using?
Click to expand...
Click to collapse
Stock default 245/1200.
I'll try to wipe and start fresh when I have time. I started Nightly #27 freshly wiped but haven't wiped since.
Just flashed the 1.8 kernel with the new video drivers and its a little funky on the latest evervolv. My phone can do 1.8 stable but it is probably the video drivers acting up, gonna flash the uv kernel next
Edit: flashed release 1.5 uv 1.8ghz and it was acting up as well, on release 1.4 @ 1.8 ghz and the phone is really smooth, very fast and very stable. On a side note my performance numbers blow compared to the cm7 numbers, 1400/1400 smart bench, 48 avg linpack and like 2k on quadrant.....?
Sent from my PG06100 using XDA App
threeFiftyLi said:
Stock default 245/1200.
I'll try to wipe and start fresh when I have time. I started Nightly #27 freshly wiped but haven't wiped since.
Click to expand...
Click to collapse
Okay.
DWake014 said:
Just flashed the 1.8 kernel with the new video drivers and its a little funky on the latest evervolv. My phone can do 1.8 stable but it is probably the video drivers acting up, gonna flash the uv kernel next
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Try one of the earlier kernels then, there might be some sort of aosp framework change required to take use of the new video drivers, I can't confirm it without hearing from toastcfh but that's why I say v1.5+ is for cm7 nightly31+.
I may be completely wrong about it though.
DWake014 said:
Just flashed the 1.8 kernel with the new video drivers and its a little funky on the latest evervolv. My phone can do 1.8 stable but it is probably the video drivers acting up, gonna flash the uv kernel next
Edit: flashed release 1.5 uv 1.8ghz and it was acting up as well, on release 1.4 @ 1.8 ghz and the phone is really smooth, very fast and very stable. On a side note my performance numbers blow compared to the cm7 numbers, 1400/1400 smart bench, 48 avg linpack and like 2k on quadrant.....?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Edit for your edit.
Yes, as I just said I think there might be some sort of framework change required/recompile of evervolv to support the new drivers.
Are you sure the speeds are taking? As described in the quirks, it takes a few seconds to take a speed for some, and sometimes requires screen off/on. I usually don't benchmark until linpack hits 60+
crump84 said:
The latest Cyanogen build, tried both Release 3 1.5ghz and Release3 1.8ghz. I downloaded them last night, I may have to tried the newest release.
Click to expand...
Click to collapse
I thought that was the problem
Sent from my PG06100 using XDA App
Ran some more tests, this is on Evervolv with release 1.4. Set it on 1.8/1.8 performance and:
Linpack (12 runs): avg 61, few 62s
quadrant free ( 8 runs) : avg ~2600, high was 2900
smartbench (7 runs) : avg 1800/1800, high of 1800/1900
Scaryghoul said:
Okay.
Try one of the earlier kernels then, there might be some sort of aosp framework change required to take use of the new video drivers, I can't confirm it without hearing from toastcfh but that's why I say v1.5+ is for cm7 nightly31+.
I may be completely wrong about it though.
Edit for your edit.
Yes, as I just said I think there might be some sort of framework change required/recompile of evervolv to support the new drivers.
Are you sure the speeds are taking? As described in the quirks, it takes a few seconds to take a speed for some, and sometimes requires screen off/on. I usually don't benchmark until linpack hits 60+
Click to expand...
Click to collapse
I think you're right on Evervolv cause mine from yesterday works great but my testkern.a2 is crap on there.
Nice job on the undervolting. I couldnt even boot the newest one! As always, appreciate your help with all my n00b questions.
Toasted by Nightly.
DWake014 said:
Ran some more tests, this is on Evervolv with release 1.4. Set it on 1.8/1.8 performance and:
Linpack (12 runs): avg 61, few 62s
quadrant free ( 8 runs) : avg ~2600, high was 2900
smartbench (7 runs) : avg 1800/1800, high of 1800/1900
Click to expand...
Click to collapse
Thanks for sharing =D
smoothtaste said:
I think you're right on Evervolv cause mine from yesterday works great but my testkern.a2 is crap on there.
Nice job on the undervolting. I couldnt even boot the newest one! As always, appreciate your help with all my n00b questions.
Toasted by Nightly.
Click to expand...
Click to collapse
Thanks =)
---------------------------------------------------
1.6 is out for the unstable voltage.
I'll compile the stable ones later, already made the commits to the github for what I can remember I changed
Check the changelog people =D
Can you experienced doods, help out a noob? I have recently rooted my phone (after MUCH research and reading) and just installed Set CPU app. I have been reading about the different settings for Set CPU, and it appears to be device specific, so I wanted to know if any can suggest some stable and useful settings and profiles I can use.
My goal would be to extend battery life and increase erformance while the phone is being used. I kinda guess this is most peoples reason for using this app. Slow the CPU down while the screen is off, and increase it a bit when the screen is on. I am not totally sure why you adjust it while it is charging. And wold this fi into the screen is off profile.
Ok enough rambling, and thanks for any assistance!
Forget SETCPU. Voltage Control is the way to go. For battery life, I would underclock to 100-800mhz and have -100mv all through the range. For performance, 100-1400 mhz (1.5 & 1.6 ghz are heavily overvolted) and have -100mv from 100-1000 mhz and -75 for 1100-1400. Leave the governers and io schedulers where they are.
Sent from my Droid Charge running GummyFroyo 1.9.1
kvswim said:
Forget SETCPU. Voltage Control is the way to go. For battery life, I would underclock to 100-800mhz and have -100mv all through the range. For performance, 100-1400 mhz (1.5 & 1.6 ghz are heavily overvolted) and have -100mv from 100-1000 mhz and -75 for 1100-1400. Leave the governers and io schedulers where they are.
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
Using the voltage control within SetCPU or a voltage control app?
Thanks
Edit: after installing set CPU my phone seems to be running slower than usual. So, I ran a quadrant benchmark and it is coming up with much lower scores than it did before. Is there any way to set it back to the original cpu speeds with out deleting the app?
Delete setcpu and get voltage control from the market.
Sent from my SCH-I510 using Tapatalk
sneakysolidbake said:
Delete setcpu and get voltage control from the market.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
anoninja118 said:
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
Click to expand...
Click to collapse
Thanks, can I use this with imnuts OTB kernal?
gdubya34 said:
Thanks, can I use this with imnuts OTB kernal?
Click to expand...
Click to collapse
you should be able to yeah.. try a different set of settings every day to find whats the most fast and stable on your phone, what works on mine may not necessarily work on yours or someone elses
blazing through on my VZ Droid Charge 4G
anoninja118 said:
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
Click to expand...
Click to collapse
Tried those settings and my phone froze a few times so I upped the voltage to get it to work for me. This is my first time overclocking a phone. Do any of these settings look strange using voltage control?
100-400mhz uv-75
800-1000mhz uv-50
1200-1300mhz uv-25
I haven't froze yet, although I noticed my battery drains a little faster then normal (that was expected).
hmmm.... The GummyCharged GBE 1.9RC1 8/13/11 kernel is not incompatible with the Voltage control free app.
Error message "Unsupported kernel detected. The kernel your device is running is incompatible with Voltage control."
praveen1789 said:
hmmm.... The GummyCharged GBE 1.9RC1 8/13/11 kernel is not incompatible with the Voltage control free app.
Error message "Unsupported kernel detected. The kernel your device is running is incompatible with Voltage control."
Click to expand...
Click to collapse
GummyCharge GBE is gingerbread which means stock kernel, no voodoo and therefore no changing of voltage settings
blazing through on my VZ Droid Charge 4G
Gotcha! Thanks to that.
Now I have a crazy question below. (trust me there are even more questions all over my mind now)
When they say "ROM", I'm assuming that its collective of Kernel, all the apps and the radio.... Can't we just downgrade the kernel of "GummyCharge GBE" Rom?
anoninja118 said:
+1 for this
running Imoseyon's OC/UV test kernel:
100-1000mhz uv -75
1200-1400 uv -50
IO: deadline and Governor: conservative
smooth as butter and fast when it needs to be, getting a little over 2200 in quadrant
Click to expand...
Click to collapse
These gave me a reboot watching netflix on wifi. Will try -25 @ 1300 and see what happens. Thanks for the post though. Its a great starting place for me.
running humble 1.51
Khanusma said:
These gave me a reboot watching netflix on wifi. Will try -25 @ 1300 and see what happens. Thanks for the post though. Its a great starting place for me.
running humble 1.51
Click to expand...
Click to collapse
Yeah those are kinda high 'performance' settings, not all phones like being overclocked or undervolted much less both lol.. Start with it just overclocked for a day or two and see how it runs, however there's gonna be some serious battery drain obviously. Then move on to undervolting slowly like maybe -25 across the board and leave 1400 alone for another day or two... just experiment like this until you have the right balance of speed, stability and battery life. As a matter of fact I toned mine down a bit afterwards and it worked nice:
Overclocked to 1.2ghz (1200mhz),
took out 600mhz frequency and set 100 to -75, then 200-800 at -50, 1000 and 1200 at -25
or if you want battery life and don't mind sacrificing a little performance you can underclock to 800mhz and set all to maybe -75... its a lot of testing to find what works for your phone, if it reboots freezes or lags too much its either overclocked too much or undervolted too much
edit: I also use the free voltage control app from the market, it lets you set min. and max. clock speeds as well as voltage so thats all I need lol
blazing through on my VZ Droid Charge 4G
praveen1789 said:
Gotcha! Thanks to that.
Now I have a crazy question below. (trust me there are even more questions all over my mind now)
When they say "ROM", I'm assuming that its collective of Kernel, all the apps and the radio.... Can't we just downgrade the kernel of "GummyCharge GBE" Rom?
Click to expand...
Click to collapse
Roms are not always all inclusive with a kernel and whatnot.. Most are custom apps, themes, and build/framework remakes to operate on top of the stock roms and will use stock radio and kernel to operate unless a custom radio/kernel is flashed. While most radios and apps will work well with different roms, kernels (being basically the 'engine' for the android OS i believe) are dependant on baseband and will not work by switching them around or flashing one over the other. This is the way I understand it to be anyway, I just know kernels are not compatible between 2.2 and 2.3
blazing through on my VZ Droid Charge 4G
anoninja118 said:
Roms are not always all inclusive with a kernel and whatnot.. Most are custom apps, themes, and build/framework remakes to operate on top of the stock roms and will use stock radio and kernel to operate unless a custom radio/kernel is flashed. While most radios and apps will work well with different roms, kernels (being basically the 'engine' for the android OS i believe) are dependant on baseband and will not work by switching them around or flashing one over the other. This is the way I understand it to be anyway, I just know kernels are not compatible between 2.2 and 2.3
blazing through on my VZ Droid Charge 4G
Click to expand...
Click to collapse
Makes sense. I'm sure the apps and radio are dependent on the kernel as it is the core. (like an Operating system that provides the platform for applications to work.)
I'm sure the developers thoroughly test these combinations before releasing any ROM, .
However I want to have some fun updating the kernel on the GC GBE 1.9 that I currently have on my charge with couple other kernels out there....
Will see if I create some magic
praveen1789 said:
Makes sense. I'm sure the apps and radio are dependent on the kernel as it is the core. (like an Operating system that provides the platform for applications to work.)
I'm sure the developers thoroughly test these combinations before releasing any ROM, .
However I want to have some fun updating the kernel on the GC GBE 1.9 that I currently have on my charge with couple other kernels out there....
Will see if I create some magic
Click to expand...
Click to collapse
don't use froyo kernels with GB (as of right now there's only one custom GB kernel, navenedrobs nameless ext4 one), it will just lead to a soft bricked phone... i could be wrong but i think imnuts and imoseyon from team gummy are working on some GB kernel awesomeness
blazing through on my VZ Droid Charge 4G
What about the noop, fifo, bfq, vr options? What do these mean?
Sent from my gummycharged SCH-I510 using XDA Premium App
gdubya34 said:
What about the noop, fifo, bfq, vr options? What do these mean?
Sent from my gummycharged SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
Don't touch them. They will either make your phone crawl or have FCs. It hasn't been implemented in the kernel yet.
Sent from my Droid Charge running GummyFroyo 1.9.1
kvswim said:
Don't touch them. They will either make your phone crawl or have FCs. It hasn't been implemented in the kernel yet.
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
Oh crap, I am not sure what one it was on when I installed it. I think I changed it by accident. right now it is on the vr setting.
Are there any setting s to avoid when messing with the voltage control, and if I delete the app does go back to the default settings?
gdubya34 said:
Oh crap, I am not sure what one it was on when I installed it. I think I changed it by accident. right now it is on the vr setting.
Are there any setting s to avoid when messing with the voltage control, and if I delete the app does go back to the default settings?
Click to expand...
Click to collapse
To avoid: IO schedulers, overvolting (only done in Extreme), and going above 1400 mhz, as 1500 & 1600 are HEAVILY overvolted. Toasted processors=bad magic.
However, you can switch the governers from conservative to performance, but its kind of useless.
If you delete the app it will NOT go back to default...I think. The default io scheduler for imoseyon's kernel is deadline, I forgot what PBJ's is. If you switched it and its still working, don't worry about it.
Sent from my Droid Charge running GummyFroyo 1.9.1
I just purchased SETCPU from the market. I know its free here but from what I've read it is well worth 2 bucks (or a lot more).
I'm running bamf 1.0,9 cubed and I verified in setcpu it is set to low of 368 and high of 1 ghz.
I am using stock kernel but thinking of trying adynaline's new kernel.
Anyway should I set a custom profile? Any suggestions on settings? I'm more interested in avoiding screen freeze than speeding up anything.
Profiles are not needed.
They're just usefull if you want to underclock at a certain battery level or temperature to save battery or cool down the device in my opinion.
Sent from my LT15i using XDA Premium App
I just overclocked to 1.28 we'll see how it goes....
recDNA said:
I just overclocked to 1.28 we'll see how it goes....
Click to expand...
Click to collapse
should be fine.
i had some profiles of:
screen on - min was as low as it could go, max = 1.4ghz -ondemand
screen off - min was as low as it could go, maz = 5xx mhz - batt saver or conservative
battery at 50%, put max at 1ghz- on demand
battery at 15% max was at 7xx mhz -batt saver/conservative
temp>115 max was 7xx mhz-batt saver
this yeilded pretty good battery life. i am a heavy data user in a 4g area and on a sense ROM i could easily get 12 hours. pushed it over a day with me trying to get the best battery life possible.
Sounds good. I'm also a heavy user.
Profiles aren't needed with a lot of kernels. Some have built in profiles and in others some governors include profiles such as smartass and interactivex.
The only thing I really use it for is if I overclock, which I rarely ever do, and to change the governor.
Sent from my ADR6400L using XDA App
I use SetCPU with imo's latest kernel and I never let it go above the 1.59GHz mark, but that is where I usually put it when charging via AC.
bamf forever already has the ability to set cpu speeds, its in the bamf settings
It says in the op of bamf kernel thread that bamf setting is unable to retain kernel settings so use setcpu.
ok so it was running ok with minimal lag now it lags like crazy where you cant even move at times with unexpected closes or pauses in the game. Very frustrating. Running Fp1 Stock
Any help appreciated
Works fine for me in Eclipse 2.0, even with conservative governor. My brother was on stock fp1 and he was lagging out so he made me root his phone and put eclipse on it
JihadSquad said:
Works fine for me in Eclipse 2.0, even with conservative governor. My brother was on stock fp1 and he was lagging out so he made me root his phone and put eclipse on it
Click to expand...
Click to collapse
Yeah thought about placing eclipse 2.0 on the phone although i couldnt get some of the stock apps to migrate with it Backup manager, Feeds & updates, Buddies Now, and the weather widget but, ill try
Whats conservative governor ?
babyjake said:
Whats conservative governor ?
Click to expand...
Click to collapse
It makes the CPU frequency go up slower to save battery. Basically in games it reduces performance if it doesn't demand max speed all the time.
I'm running Eclipse 2.0 as well but when I play Temple run o just overclock to 1.2 with smartassv2 governor and there's no lag at all.
Sent from my SCH-I510 using XDA
Interesting i guess i should try Eclipse 2.0 Just going to be hard to get used to not having my stock widgets
If I'm on Eclipse 2.0 with the stock FP1 kernel . What is the safest and most stable way to bump my Charge CPU up to 1.2 ghz ?
- I experienced quite a bit of lag as well while trying to play Temple Run .
The only way to do it on a stock kernel is with Tegrak Overclock from the Market. The free version will overclock. To make it stick on boot, you have to buy the pay version.
I was on FP1 stock and temple run was working fine without any lags. And yesterday I put the Tweaked v2.0 on my phone and now temple run lags a lot. Kinda weird
Sent from my SCH-I510 using XDA
the sandman89 said:
I was on FP1 stock and temple run was working fine without any lags. And yesterday I put the Tweaked v2.0 on my phone and now temple run lags a lot. Kinda weird
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
Im Running Tweaks 1.4 with PBnJ at 1.2GHz with Smartass V2 and mine lags as well.
I suspect that this may be a memory contention problem. When I play Temple Run with my phone on Tweaked 2.1 with imnuts PBJ 0524, it's horribly laggy - if my Yahoo! Mail and Facebook (official) apps are either sitting in the background constantly hitting the network or trying to reload whenever OOM-killed. If I go to Titanium Backup and freeze those two, Temple Run becomes playable again.
There are a number of fat, pushy apps out there that just won't back off even when your phone is otherwise busy, including the two mentioned above. Try trimming your widgets and temporarily freezing things you don't want to uninstall, and you'll get a better user experience on heavyweight games like Temple Run.
ya I run my charge on tweaked 2.1 UV'd at 800mhz but I use tasker to OC my phone to 1.2 whenever I open a CPU intensive game it takes a second for it to run without lag but then it works with no problems
p2kmafia said:
ya I run my charge on tweaked 2.1 UV'd at 800mhz but I use tasker to OC my phone to 1.2 whenever I open a CPU intensive game it takes a second for it to run without lag but then it works with no problems
Click to expand...
Click to collapse
What does your setup look like to stay UVd (which you can't do in tasker afaik) while not in the game? I've played with some things, but they turned out to be kind of cumbersome.
BleedsOrangeandBlue said:
What does your setup look like to stay UVd (which you can't do in tasker afaik) while not in the game? I've played with some things, but they turned out to be kind of cumbersome.
Click to expand...
Click to collapse
I run:
100mhz -200
200mhz -150
400mhz -125
800mhz -100
1000mhz -75
1200mhz -50
I'm always UV'd at the 800 mark but I think when tasker overclocks me to 1.2ghz it keeps my UV settings but idk.
edit: I use smartass v2 governor
Whenever I would have tasker take over, I would later reopen Voltage Control and all the voltage settings would be reset to their standard values.
I actually just noticed that my tasker isn't actually doing anything lol. I'll set up the task and press the play (test) button and it'll work but then I'll go into an app I've set up and my max is set to 1200 but my phone is maxing at 800 still. I don't think that voltage control and tasker integrate very well and that might be your problem but my UV setting are intact.