I am currently on Viper Xl rom.
I am not able to connect my one xl to pc.
Usb debugging is on.
Currently running win 7 ultimate.
i am able to connect phone & transfer data from my netbook which is running win7 home.
so i assume there is some problem in my pc.
are there any drivers missing..?
if yes then when i can find them..?
already tried some from ineternet but no result.
Related
Hi, I'm running windows 8.1
I've installed nexus root kit with appropriate drivers. I've rooted my nexus 5 which still runs 4.4.
But since a few days, I can't see it anymore using USB connection, neither as a multimedia neither as a photo device.
A bit disappointed with this since I need it !
I've tried to follow NRK steps without success.
Any idea or suggestions ?
Sent from my Nexus 5 using xda app-developers app
Don't mean to hijack the thread, but I'm having the exact same problem.
It's literally like earlier today I had my Nexus connected to my computer and it showed up as a drive as per usual. Then I disconnected it for whatever reason and a bit later when I tried to reconnect it, it no longer showed up at all. I've tried it on multiple computers, in both media and camera mode with usb debugging on and off. Basically I've tried the obvious stuff, but it just no longer shows up.
If you guys used ABD to sideload 4.4.1 or 4.4.2 then you will need to take off the drivers for that before your Nexus will be recognised as a standard media device in My Computer - it's because the ADB overwrites standard Google USB drivers
Had same issue yesterday
Turn off usb debugging. Mine only recognises it as a storage device with it off
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Turn off usb debugging. Mine only recognises it as a storage device with it off
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Interestingly enough I had the problem with the PC not recognizing my phone.
When I turned USB debugging ON, *tada* it worked. I don't know the background why this even makes a difference.
However for me it worked.
Disabling debugger change just nothing, neither than disabling developer tools...
I used Wugfresh's Toolkit to get the drivers. Make sure you use the usbdeview tool to delete any other drivers on your computer associated with the device. Then I did the install of the PDAnet drivers through the toolkit. When installing the drivers, there is actually a prompt that comes up on your phone that you have to "ok" as well. After two hours, that is how I got the drivers to work on Windows 8.1.
lowandbehold said:
I used Wugfresh's Toolkit to get the drivers. Make sure you use the usbdeview tool to delete any other drivers on your computer associated with the device. Then I did the install of the PDAnet drivers through the toolkit. When installing the drivers, there is actually a prompt that comes up on your phone that you have to "ok" as well. After two hours, that is how I got the drivers to work on Windows 8.1.
Click to expand...
Click to collapse
I did this. But my phone now is only detected as a Camera and not a Media Device. Any idea why this is?
Hi! I'm having some issues trying to unlock my bootloader so I can root my new one mini.
I've been trying to follow the instructions here: http://www.htcdev.com/bootloader/unlock-instructions/
But when I get to step five, fastboot won't detect the phone. adb can't see the phone either. My computer cannot recognize the device
I have sync killed on my computer, I've tried both USB 2.0 and 3.0 ports, and I know my USB driver is up to date.
Something with my computer's OS or drivers is not working, and I can't figure out how to progress. Can anyone help?
HTC USB drivers don't work on Windows 8/8.1.
Sent from my HTC One mini using Tapatalk
I have an SCH-i535 running CM-11, M3-SNAPSHOT. My desktop is running Linux Mint 16 in one partition and Win 7 in another.
I cannot get the phone to show up when plugged into a USB hub. It isn't simply that MTP is not working, but that the USB connection doesn't even show up in dmesg. I have android debugging turned on and have tried to connect via adb in recovery also. In no situation have I been able to establish any sort of USB connection since changing to M3. Setting/toggling MTP under settings>>storage>>menu>>USB computer connection also fails.
I have also tried to connect from my Win 7 partition and nothing shows up at all.
Does anyone have any suggestions other than going back to 10.2?
polymath257 said:
I have an SCH-i535 running CM-11, M3-SNAPSHOT. My desktop is running Linux Mint 16 in one partition and Win 7 in another.
I cannot get the phone to show up when plugged into a USB hub. It isn't simply that MTP is not working, but that the USB connection doesn't even show up in dmesg. I have android debugging turned on and have tried to connect via adb in recovery also. In no situation have I been able to establish any sort of USB connection since changing to M3. Setting/toggling MTP under settings>>storage>>menu>>USB computer connection also fails.
I have also tried to connect from my Win 7 partition and nothing shows up at all.
Does anyone have any suggestions other than going back to 10.2?
Click to expand...
Click to collapse
I was having a similar issue, I followed the instructions in this post and it fixed the issue:
http://forum.xda-developers.com/showpost.php?p=47140274&postcount=11732
yoda2nd said:
I was having a similar issue, I followed the instructions in this post and it fixed the issue:
http://forum.xda-developers.com/showpost.php?p=47140274&postcount=11732
Click to expand...
Click to collapse
I did not have an issue with the M7 snapshot. I have not yet tried for the M8.
Good morning
I tried updating the rom on my htc sensation and to do so i usualy have to flash the boot.img aswell to get rid of the infinite startup screen
but my device doesnt work anymore when im in the bootloader in fastboot mode on windows i get a message usb device malfunctioned
i know the usb works as when im booted up in my (previous rom) i can still send data from my pc to my phone over the usb cable
any ideas?
regards
frayful said:
Good morning
I tried updating the rom on my htc sensation and to do so i usualy have to flash the boot.img aswell to get rid of the infinite startup screen
but my device doesnt work anymore when im in the bootloader in fastboot mode on windows i get a message usb device malfunctioned
i know the usb works as when im booted up in my (previous rom) i can still send data from my pc to my phone over the usb cable
any ideas?
regards
Click to expand...
Click to collapse
Might be a driver issue. Can you try a different USB port?
Sent from my HTC Desire S using Tapatalk
Heya i tried different usb ports tried different cables and tried it on 2 other laptops aswell all gave the error usb device not recognized, device malfunctioned after like 10 seconds after being connected
regards
Which Windows do you have?
tested on 3 windows 8.1 pc's
frayful said:
tested on 3 windows 8.1 pc's
Click to expand...
Click to collapse
maybe you are facing now connectivity issues with w8
write in the search box "how to set up adb/fastboot in windows 8"
check some threads and see if you have any success
Hi XDA !
I have a problem with my HTC ONE S.
When i plug my phone to the computer, the computer doesn't recognize the phone.
It's the same things when i plug when i am in FASTBOOT mode, never the screen display FASTBOOT USB.
I'm in original rom, HBOOT 2.15, no-root.
I'm using the original HTC cable. i have try with other cable (LOGITECH, SAMSUNG, LG....)
My PC is on Windows 8.1 Update 1 (i have try on Windows XP, 7 and Ubuntu)
Have you an idea for solve my problem ?
Sorry for my english, i'm french.
Search & instal the latest HTC drivers and ADB.
8.1 its a problem. Mine not recognize phone. So i go back to 8
I have the latest driver and ADB but is doesn't work.
and i have try with a different OS.....
It's windows 8.1. for some reason it won't recognize most android phones properly for fastboot.
EDIT: I may be wrong. looks like there's a few workarounds out there now. Try these:
http://forum.xda-developers.com/dro...er-fix-windows-8-1-update-2-fastboot-t2831385
http://blogs.msdn.com/b/usbcoreblog...with-code-43.aspx?CommentPosted=true#10530595