I have an SCH-i535 running CM-11, M3-SNAPSHOT. My desktop is running Linux Mint 16 in one partition and Win 7 in another.
I cannot get the phone to show up when plugged into a USB hub. It isn't simply that MTP is not working, but that the USB connection doesn't even show up in dmesg. I have android debugging turned on and have tried to connect via adb in recovery also. In no situation have I been able to establish any sort of USB connection since changing to M3. Setting/toggling MTP under settings>>storage>>menu>>USB computer connection also fails.
I have also tried to connect from my Win 7 partition and nothing shows up at all.
Does anyone have any suggestions other than going back to 10.2?
polymath257 said:
I have an SCH-i535 running CM-11, M3-SNAPSHOT. My desktop is running Linux Mint 16 in one partition and Win 7 in another.
I cannot get the phone to show up when plugged into a USB hub. It isn't simply that MTP is not working, but that the USB connection doesn't even show up in dmesg. I have android debugging turned on and have tried to connect via adb in recovery also. In no situation have I been able to establish any sort of USB connection since changing to M3. Setting/toggling MTP under settings>>storage>>menu>>USB computer connection also fails.
I have also tried to connect from my Win 7 partition and nothing shows up at all.
Does anyone have any suggestions other than going back to 10.2?
Click to expand...
Click to collapse
I was having a similar issue, I followed the instructions in this post and it fixed the issue:
http://forum.xda-developers.com/showpost.php?p=47140274&postcount=11732
yoda2nd said:
I was having a similar issue, I followed the instructions in this post and it fixed the issue:
http://forum.xda-developers.com/showpost.php?p=47140274&postcount=11732
Click to expand...
Click to collapse
I did not have an issue with the M7 snapshot. I have not yet tried for the M8.
Related
Ics says nothing. JB says it charging lol.
With my usb data. It was connected succefully before. So i am clue less
Are you trying to connect to transfer files, sync outlook or issue ADB or APX commands?
Does your computer play the new hardware sound?
What OS is your computer running?
Do you have USB Debugging checked?
Have you tried another USB port on your computer?
Also, many of the JB ROMs show a charging indicator via USB even if it is not really charging.
frederuco said:
Are you trying to connect to transfer files, sync outlook or issue ADB or APX commands?
Does your computer play the new hardware sound?
What OS is your computer running?
Do you have USB Debugging checked?
Have you tried another USB port on your computer?
Also, many of the JB ROMs show a charging indicator via USB even if it is not really charging.
Click to expand...
Click to collapse
APX commands
No
OS: Windows 7 64 bit.
Yes, I haave checked
I have .... 9 usb ports. None of them works.
I did use other and it didnt work.
I will test on other pc's.
Are you sure you are getting it booted up into APX mode? I know it is a bit tricky to do.
frederuco said:
Are you sure you are getting it booted up into APX mode? I know it is a bit tricky to do.
Click to expand...
Click to collapse
I used my apx mode arround 2012 so i still have it and boot up.
As for cable they claim it's 40 pin ( my second non legemit cable).
I'm gonna test today on 2 pc's :3
Also i npotic my secondary cable has usb 3.0 + there is numbers of peopel has same PROBLEM! : http://forum.xda-developers.com/showthread.php?t=1913912
Good morning
I tried updating the rom on my htc sensation and to do so i usualy have to flash the boot.img aswell to get rid of the infinite startup screen
but my device doesnt work anymore when im in the bootloader in fastboot mode on windows i get a message usb device malfunctioned
i know the usb works as when im booted up in my (previous rom) i can still send data from my pc to my phone over the usb cable
any ideas?
regards
frayful said:
Good morning
I tried updating the rom on my htc sensation and to do so i usualy have to flash the boot.img aswell to get rid of the infinite startup screen
but my device doesnt work anymore when im in the bootloader in fastboot mode on windows i get a message usb device malfunctioned
i know the usb works as when im booted up in my (previous rom) i can still send data from my pc to my phone over the usb cable
any ideas?
regards
Click to expand...
Click to collapse
Might be a driver issue. Can you try a different USB port?
Sent from my HTC Desire S using Tapatalk
Heya i tried different usb ports tried different cables and tried it on 2 other laptops aswell all gave the error usb device not recognized, device malfunctioned after like 10 seconds after being connected
regards
Which Windows do you have?
tested on 3 windows 8.1 pc's
frayful said:
tested on 3 windows 8.1 pc's
Click to expand...
Click to collapse
maybe you are facing now connectivity issues with w8
write in the search box "how to set up adb/fastboot in windows 8"
check some threads and see if you have any success
Hi Guys,
I've had a few problems with my N5 recently...
If I plug my N5 into my PC via the stock USB cable and boot into the Bootloader (PWR+VOLDN) then it will allow me to flash the original N5 firmware, located here: https://developers.google.com/android/nexus/images, this would indicate to me that there is no issue with the actual devices ability to transfer files via USB connection... Right?
No!
For some strange reason my phone will allow me to push a full factory image to it and will also process any Fastboot commands that are sent to it but as soon as you boot into something like TWRP and try to control the phone's ADB functionality it will not find the device at all! The new MTP option in TWRP 2.8 will allow my computer to see my phone's MTP connection for about 1 second and then will immediately disconnect, the same happens when trying to connect to MTP from within Android too.
USB debugging doesn't show that it is connected when my phone is plugged into my PC and Windows makes the 'device connected' sound and then straight after makes the 'device disconnected' sound...
Any ideas? I am certain that this is an issue with my handset's hardware or software rather than any of the computers or cables... I have tried 3 different cables (including the stock cable) and also three different computers (Windows 8.1 @ Work, Mac OS X @ Work and my own personal PC running Windows 8.1 & Ubuntu @ Home)... All OSs and all computers run into exactly the same issue, device connects briefly and then disconnects.
I have troubleshooted issues relating to the driver. This is not the issue... Device Manager cannot even see the hardware after the disconnect.
Thanks for any help in advance,
Lewis
Also:
-Android does not detect that the USB is charging the device unless the device is booted with the cable attached (if it's not attached before the 'Google' screen then it can't see the USB input at all, within android or TWRP, of course...).
Having the exact same problem. Did you find a solution?
EvilBetty said:
Having the exact same problem. Did you find a solution?
Click to expand...
Click to collapse
It's most likely a driver issue.
Elluel said:
It's most likely a driver issue.
Click to expand...
Click to collapse
Not a driver issue.
3 different Nexus 5s, 5 different workstations. Other two Nexi are fine on all 5 PC's.
1 PC used for ADB forensics, 2 used for ADB development work, one known working for ROM'ing / rooting.
Phone has been factory reset, factory ROM'd from Fastboot. Connects fine on Fastboot. Will not connect on ADB / MTP.
On a fresh PC / phone reboot, the PC will detect the phone for just a second and then it will not reconnect until process is completed.
-EB
What's your adb version?
Went on for about 2 weeks, then suddenly went away on its own. I have no idea what the problem was or the solution. Sorry.
i have a nexus 5 which has stock ROM and blu spark kernel . i locked the bootloader while on the same kernel and again unlocked it . . the phone is bootlooping into twrp and the google logo . in twrp it says unable to mount data . i can access twrp . . i am unable to flash anything . it says unable to mount data/ . please the attachment
Hi,
I'm using this CM 11 http://forum.xda-developers.com/showthread.php?t=2922500 but I have strange problem with my laptop. It periodically looses driver information for my device. I don't know how but when I re-installed my OS Windows 7 (32bit) it found the proper driver. Later I've got a message that my USB device is not recognized and can't connect to my device. Does anyone else have the same problem and do you know a fix? I've tried a lot and different driver versions but without success. Logcat doesn't show anything last time but I will try later or when I loose drivers again (it seems I cannot use USB again).
BTW I don't have this problem with my desktop PC which has always connected USB cable to it. Also everything works fine with CM 10.1, MIUI or Sense ROMs but they are based on lower Android versions.
P.S. I was trying to connect with another USB cable. I've found my cable that I used to install drivers and USB is working again. This is really strange behaviour
Logcat from device terminal
Logcat when plug in or out my USB connector is attached.
Use this tool
http://forum.xda-developers.com/showthread.php?t=2588979
I tried to access my phone's internal storage but the phone doesn't show in My Computer. The Portable Device in Device manager says MTP USB device and it has the yellow triangle on it. The Samsung driver is the Android Composite ADB Interface with no triangle. I have debugging on but the MTP device driver always fails whether debugging is on or not. I used Koush's drivers found here on XDA but same old thing. The Portable Device used to show up as A0001 and /or One but now it doesn't and I don't understand how that happened. Can someone enlighten me and perhaps solve this problem? It's been very frustrating as I just spent 13 hours trying to get my phone working (Thanks Heisenberg for fixing) and now another 6 trying to figure this out. Please HELP if you can. Thanks!
kristorm said:
I tried to access my phone's internal storage but the phone doesn't show in My Computer. The Portable Device in Device manager says MTP USB device and it has the yellow triangle on it. The Samsung driver is the Android Composite ADB Interface with no triangle. I have debugging on but the MTP device driver always fails whether debugging is on or not. I used Koush's drivers found here on XDA but same old thing. The Portable Device used to show up as A0001 and /or One but now it doesn't and I don't understand how that happened. Can someone enlighten me and perhaps solve this problem? It's been very frustrating as I just spent 13 hours trying to get my phone working (Thanks Heisenberg for fixing) and now another 6 trying to figure this out. Please HELP if you can. Thanks!
Click to expand...
Click to collapse
Even I had faced this problem on Windows 8. I had installed drivers 4-5 odd times. But later I just flashed CM11S zip via recovery and enabled USB Debugging Mode and it finally got recognized on my laptop.
I was facing many issues with all lollipop ROMs. Hence I reverted back and now everything is working fine.
I, too am using CM11s as Lollipop has too many bugs for me at this time. Maybe I'll try re-flashing CM and see what happens. Thanks for the reply
My question is: How can one flash from recovery when the file that needs to be flashed cannot be sent to the phone because it's not recognized by the computer?
Nevermind...I figured it out and flashed 11S successfully! Everything shows up now on computer. WOOT!