Bricked? Please help, phone barely boots... Wifes phone and she is ticked - HTC Inspire 4G

Some background... The whole reason I was rooting this phone was the volume button was malfunctioning... constantly pressing up. I used the hack-ace tool linked somewhere else and followed the directions. At one point during the install the phone went black and the red light began to blink... in command prompt window it just said waiting for device for a long time. Now all it will do it go into the clockworkmod recovery screen. If I try to restart hack ace it says the sd card is either not mounted or corrupted. Any help?!? this is my wifes phone so I need to fix it fast!

soniktoothe said:
Some background... The whole reason I was rooting this phone was the volume button was malfunctioning... constantly pressing up. I used the hack-ace tool linked somewhere else and followed the directions. At one point during the install the phone went black and the red light began to blink... in command prompt window it just said waiting for device for a long time. Now all it will do it go into the clockworkmod recovery screen. If I try to restart hack ace it says the sd card is either not mounted or corrupted. Any help?!? this is my wifes phone so I need to fix it fast!
Click to expand...
Click to collapse
When did you use AAHK? It has recently been retired and the files it needs are gone, so using it now can get you stuck. If you have CWM the phone was either S-Off or bootloader-unlocked at some point. Which is it?

bananagranola said:
When did you use AAHK? It has recently been retired and the files it needs are gone, so using it now can get you stuck. If you have CWM the phone was either S-Off or bootloader-unlocked at some point. Which is it?
Click to expand...
Click to collapse
Thanks so much for the quick reply! IT had no rooting done before today, it had gotten a little ways into the rooting before it quit... That must be how CWM is on there. It had gotten to the point of HBoot being installed when it quit.

soniktoothe said:
Thanks so much for the quick reply! IT had no rooting done before today, it had gotten a little ways into the rooting before it quit... That must be how CWM is on there. It had gotten to the point of HBoot being installed when it quit.
Click to expand...
Click to collapse
What does hboot say? In case you don't know how to get there, reboot holding power and volume-down.

bananagranola said:
What does hboot say? In case you don't know how to get there, reboot holding power and volume-down.
Click to expand...
Click to collapse
The only thing I can get into is CWM, and it is tricky getting it to run... I think it quit before loading HBoot... TO do that I have to pull the battery and have it hooked up by USB, then turn it on.

Hold volume down as you do your power up procedure
Sent from my ADR6425LVW using Tapatalk 2

soniktoothe said:
The only thing I can get into is CWM, and it is tricky getting it to run... I think it quit before loading HBoot... TO do that I have to pull the battery and have it hooked up by USB, then turn it on.
Click to expand...
Click to collapse
Turn off your phone (you can pull the battery), then hold power and volume-down.

dlamber7 said:
Hold volume down as you do your power up procedure
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
It doesnt seen to respond to that...

Do you have adb? You could try adb reboot bootloader.

bananagranola said:
Do you have adb? You could try adb reboot bootloader.
Click to expand...
Click to collapse
Is that accessed from cwm?

soniktoothe said:
Is that accessed from cwm?
Click to expand...
Click to collapse
From your computer. You will need to install adb.

bananagranola said:
From your computer. You will need to install adb.
Click to expand...
Click to collapse
Okay, I have the adb installed and went through the process of connecting my inspire with the adb. A serial number came up so assume all is not lost because it installed the drivers for this device.
Where shall I go from here? Once again I can't say thanks enough...

Connect your phone and type adb devices. If it finds a device, type adb reboot bootloader. What does it say?

Send him over to #aceroot, it will be faster.
Sent from a dream.

Yeah, do what Tei says. Head to the freenode channel #AceRoot.

Webchat.freenode.net
In channel put "#aceroot" without the quotation.
Sent from a dream.

Thanks for your time last week on this, today the phone booted up with one press of the power button. No idea what happened but whatever glitch there was... it appears to have worked itself out.

Go there and get it set up properly anyway. That should have never happened.
Sent via LG E970 SlickROM v6

Related

Solid amber light with no/long boot

I know this title comes up a lot but I can't seem to find my problem.
I wanted to go back to the stock rom and I used the proper RUU but totally forgot to use the S-ON tool before hand. It installed successfully but now I get a solid amber light and so far I got my inspire to boot once only to get stuck on the splash screen with it vibrating non-stop.
And now it just vibrated once, went to a black screen and then shut off. I really don't know what to do since I can't even get to HBOOT nor will the computer recognize it.
I've done numerous batter/sim card pulls as well as clean them out.
Any help would be greatly appreciated
Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA
I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium
lay012 said:
I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?
moutansos said:
Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Never do a factory reset on a S-OFF device....it will jam u up.
greggyt79 said:
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?
Click to expand...
Click to collapse
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....
Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA
greggyt79 said:
Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA
Click to expand...
Click to collapse
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....
glevitan said:
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....
Click to expand...
Click to collapse
I will get back on the IRC this evening when I get home from work thanks again!!!
Does it say anything about QHUSB_DLOAD USB device being connected?
I ran into a similar problem not too long ago, immediate vibrating followed by a solid amber light and no phone activity (nothing on the screen at all). I knew I had a backup in Recovery, but I couldn't even get into recovery.
In order to work around this, I did the following steps.
1. Deleted the PD98IMG file from my SD card (so I could get to recovery once I made it to the bootloader).
2. Take out the battery, then put it back in.
3. Plug in the phone, and let it sit for a few minutes.
4. Start into bootloader (hold power + Volume Down)
Now, in my case I was just trying to get back into recovery. if you don't have a working recovery, or no ROM to flash, you'll want to grab a few RUU 's to try from the bootloader. Try stock GB first, then try a stock Froyo just for the heck of it.
Hope this helps! Good luck to anyone else that's stumbled into this problem.
side note: I've also heard of this "power problem" occurring to other people without bootloops or screwed up bootloaders: which is solved by doing steps 2 and 3, then it'll boot up normally.
help
im having same issue i have gb stock and i accidtly did froyo ruu phones power bottun does nothing i have to plug it into computer and it will get solid amber light then eventually it either brings up battery charge icon and then if i press power button or unplug it. it just shuts off the i plug it back in and wait sometimes white htc screen comes up and it vibrates for a while then boots ad works like nothing is wrong but i cant flash gb ruu when i try to do that or re root and go to recovery to reistall ics that is on my sd as soon as phone restarts during process it doesnt reboot then i have to go threw whole procss of trying to get it to boot back up
glevitan said:
Never do a factory reset on a S-OFF device....it will jam u up.
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....
Click to expand...
Click to collapse
im new to this site but i did exactly what you said in your post and now my inspire wont reboot unless i go threw a few hour process of plugin my phone in and i get solid amber light for like 5 min then a battery charge screen comes up then i have to unplug my phone and plug it back in the last time i did this it took about 8 hours of tryin until it finally got amber light for like 5 min then started vibrating for a min or 2 then it booted up and its bin workin fine for like a week now ive tried to reflash gingerbread ruu ive tried doin upgrade from my phone and tried reroot but as soon as it shuts down to start upgrade my phone is off and wont reboot

[Q] stuck on lg screen on my lg g2x

i recently got into rooting and setting up my phone for new roms but im still new at it. i ended up bricking my phone to the lg screen with the blue swipe across the screen. my computer will not register the driver to use recovery flasher. i need help. anyone wanna help out a noob?
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
jj_z1 said:
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
Click to expand...
Click to collapse
i tried to use nv flash but no matter what i do i cant seem to make my phone register in the usb driver. if i could make it register i would be able to flash it then.
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
jj_z1 said:
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
Click to expand...
Click to collapse
i dont know how to go about it.
laroacha said:
i dont know how to go about it.
Click to expand...
Click to collapse
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
jj_z1 said:
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
Click to expand...
Click to collapse
every time i look at my apx driver it always tells me to troubleshoot but it always says driver not installed. ive downloaded the same driver in different posts just to make sure but nothing helps. Wireless shops are useless. I live in vegas and there isnt a single store with a person smart enough to figure it out.lol. ive given my phone up for days at a time to shops who brag about "WE CAN FIX ANYTHING" they lied. well i guess im going to search for a few more hours on here to get some kind of lead. thanks for the help. if you kknow anything else or figure something out i would appreciate the help.
Have you tried this stuff?
http://forum.xda-developers.com/showthread.php?t=1619932
It sounds to me like your pc's jacked up the driver somehow. Try plugging in the phone with the battery out and holding all 3 buttons, go into your device manager and uninstall all the USB drivers. Then reboot and try following the apx driver installation procedure again.
Sorry if you tried all this stuff a million times already.
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
superhero7 said:
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Have you tried taking out your SIM card and micro SD card?
Usually right after I take them out and plug in my phone while holding volume up and volume down... it usually works after that.
Yup, that's my problem. No matter how many USB ports I tried it still wouldn't read it until I took out the SIM card and micro SD ;p.
Try this on for size...
laroacha said:
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
Click to expand...
Click to collapse
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
RVD1 said:
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
Click to expand...
Click to collapse
He can't flash anything to his phone -__- that's the problem we are all trying to solve.
May sound stupid, but have you tried different cords? Maybe your USB cord is bad. Just a thought.
Sent from my LG-P999 using xda premium
@op can you give us screenshots of:
A: what your device manager looks like when you plug your phone in not in apx mode.
And
B: When it is in apx mode.
To do this: right click on my computer>properties>on left hand side, click on device manager. Hit print screen, open paint and tell it to paste. Save and upload here.
Sent from my LG-P999 using xda premium
EEngineer said:
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Click to expand...
Click to collapse
well i brought it to two shops and were both unsuccessful. wireless toyz and smart fix. i have it back and it goes to the lg screen. and instead of the second it flashes from black to a very dim gray back and forth. when i hold the power button along with the volume down it does a master reset and i can press the home button then it takes me to a screen to delete cache partition and what not and you move up and down with the volume keys but i cannot select anything. i think i really messed my phone up.
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Волк said:
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
idk how to post screenshots of my phone without a camera.lol. im about ready to give up. its been way too long with not having a phone.
You hit the print screen button, open paint, and tell it to paste/paste from clipboard.
Sent from my LG-P999 using xda premium

[Q] Bricked HTC One S HELP!

So I just got my phone today, rooted and installed the Viper rom. Then I installed the blackout kernel. It installed fine but it wont start up anymore. The phone won't go to bootloader or anything. I tried the 10 second power +volume down, ill get the screen that says htc one s this is a development phone and thats it. it turns off after that. When i plug the phone into a charger the light doesnt come up, i tried to use fastboot from my computer but it can't find the device since its not in fastboot. what should i do?!
This is odd. Even when you try turning the phone on with the volume down button depressed you can't get into bootloader? I've always been able to get to bootloader so this one is a challenge. I would make sure you have enough battery life in your phone too. Even if you have kernel issues you should still be able to make it back to bootloader. It should pop up instantly without any other boot screens. I imagine you can't see your phone from your computer with either adb devices or fast boot devices?
Sent from my HTC One S using xda premium
Are you sure you flashed the right kernel? I know quite a few Blackout kernels.
You did flash the boot.img, right? You can try flashing it again. If nothing works, try an RUU, or let the battery drain.
Are you sure you're trying to go into the bootloader the right way? The trick for me was to hold down only the power button, then once it goes off, hold down the volume down and the power button.
I remember the time another person had a similar issue, and managed to get in after about 30 tries.
Sent from my HTC One S using Tapatalk 2
usaff22 said:
Are you sure you flashed the right kernel? I know quite a few Blackout kernels.
You did flash the boot.img, right? You can try flashing it again. If nothing works, try an RUU, or let the battery drain.
Are you sure you're trying to go into the bootloader the right way? The trick for me was to hold down only the power button, then once it goes off, hold down the volume down and the power button.
I remember the time another person had a similar issue, and managed to get in after about 30 tries.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
thank you! that worked, i didnt flash the boot.img.. i forgot that part lol im used to having s-off where its so much simpler, but luckily i had a backup i could use. i know this is a dumb question but how do i install the kernel with boot.img?
deepshah420 said:
thank you! that worked, i didnt flash the boot.img.. i forgot that part lol im used to having s-off where its so much simpler, but luckily i had a backup i could use. i know this is a dumb question but how do i install the kernel with boot.img?
Click to expand...
Click to collapse
Go into fastboot in the bootloader. Then type fastboot flash boot boot.img in your Windows command prompt.
You should be able to extract the boot.img from the relevant zip file of your custom kernel. Then put that file (assuming its named boot.img) in the same folder as fastboot.exe

[Q] One X Not Responding. To Anything.

I was rooting my One X and everything was going great, but I flashed a ROM that was meant for the international version and not the At&T version and now the screen is off and it won't turn on or do anything. Help?
_jakeryan said:
I was rooting my One X and everything was going great, but I flashed a ROM that was meant for the international version and not the At&T version and now the screen is off and it won't turn on or do anything. Help?
Click to expand...
Click to collapse
Are you able to go into the a fast boot screen by holding the volume down button and power button together the same time?
Sent from my HTC One XL using xda app-developers app
No
anandsamuel said:
Are you able to go into the a fast boot screen by holding the volume down button and power button together the same time?
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
No. Nothing happens. I've been trying for awhile now..
_jakeryan said:
No. Nothing happens. I've been trying for awhile now..
Click to expand...
Click to collapse
I have had this before when i first started to flash and messed up! all you have to do is keep holding down the power and volume down! just wait keep trying it. eventually it will go in fastboot . Connect your phone to your PC then in recovery click mount PUT THE RIGHT VERSION OF THE ROM in your sd card and then unmount, Go to Wipe (factory reset, system,cache,cache delvik) do it in that order then install the zip.
?
ronnyg12 said:
I have had this before when i first started to flash and messed up! all you have to do is keep holding down the power and volume down! just wait keep trying it. eventually it will go in fastboot . Connect your phone to your PC then in recovery click mount PUT THE RIGHT VERSION OF THE ROM in your sd card and then unmount, Go to Wipe (factory reset, system,cache,cache delvik) do it in that order then install the zip.
Click to expand...
Click to collapse
Do you mean constantly hold it or just hold it for awhile and then let go?
_jakeryan said:
Do you mean constantly hold it or just hold it for awhile and then let go?
Click to expand...
Click to collapse
Hold it for 15-20 seconds try again.
Do you remember what firmware or hboot you had? What Rom did you flash last?
Sent from my HTC One XL
_jakeryan said:
I was rooting my One X and everything was going great, but I flashed a ROM that was meant for the international version and not the At&T version and now the screen is off and it won't turn on or do anything. Help?
Click to expand...
Click to collapse
It depends on what Tegra rom you flashed. Some of them will hard brick your phone (which sounds like you), some can be recovered.
If you have a Windows PC, plug your phone in and open Device Manager and see what pops up. If you see QHUSB_DLOAD, you've got a brick.
Thanks
iElvis said:
It depends on what Tegra rom you flashed. Some of them will hard brick your phone (which sounds like you), some can be recovered.
If you have a Windows PC, plug your phone in and open Device Manager and see what pops up. If you see QHUSB_DLOAD, you've got a brick.
Click to expand...
Click to collapse
Yeah I get QHUSB_DLOAD. So if i take it in to get it replaced, is it so messed up that they won't even be able to tell it's been unlocked, and just replace it? I have insurance and I've had it less than 14 days. Or could I just report it stolen or lost?
The AT&T insurance covers pretty much everything. No need to lie, just tell them it doesn't work.
redpoint73 said:
The AT&T insurance covers pretty much everything. No need to lie, just tell them it doesn't work.
Click to expand...
Click to collapse
Correct, although, he may not be aware of the deductible.
Sent from my HTC One XL

[Q] Google Nexus 5 bricked? [Resolved]

Issue resolved
Hey, I was messing with ROMs on my Google Nexus 5 trying to return it to stock as it was getting a bit bloated, and wanted to try customize it using Xposed modules, after following this tutorial: http://www.droidviews.com/how-to-restoreunroot-nexus-5-by-flashing-factory-images/ It seems my phone has been bricked, anyone got any idea what to do to fix the phone?
VincibleStatue4 said:
Hey, I was messing with ROMs on my Google Nexus 5 trying to return it to stock as it was getting a bit bloated, and wanted to try customize it using Xposed modules, after following this tutorial: http://www.droidviews.com/how-to-restoreunroot-nexus-5-by-flashing-factory-images/ It seems my phone has been bricked, anyone got any idea what to do to fix the phone?
Click to expand...
Click to collapse
Can you enter bootloader?
krystyuc said:
Can you enter bootloader?
Click to expand...
Click to collapse
No, after I exited the boot loader the phone was stuck on teh booting "Google" message and that lasted about 5 mins, I tried to restart it, turned it off and now nothing will happen.
VincibleStatue4 said:
No, after I exited the boot loader the phone was stuck on teh booting "Google" message and that lasted about 5 mins, I tried to restart it, turned it off and now nothing will happen.
Click to expand...
Click to collapse
I believe it's fixable
So try this.
Keep pressing power button till shut down,then try to enter bootloader by power button + volume down.
The guide you linked....if followed properly will not brick you.
Any more details? What you did exactly....errors....anything??
Did you press the power button for a very long time to see if anything happens?
Are you sure its fully charged? Any sign of life when plugged into charger....or computer???
KJ said:
The guide you linked....if followed properly will not brick you.
Any more details? What you did exactly....errors....anything??
Did you press the power button for a very long time to see if anything happens?
Are you sure its fully charged? Any sign of life when plugged into charger....or computer???
Click to expand...
Click to collapse
I get a sound when plugged into the computer, I'm not sure if I extracted the right files to the platform-tools thing or whatnot, I also entered "fastboot flash boot boot.img" not sure if any of those was ment to be the name of my image.
This is what my platform-tools folder looks like.
http://i.gyazo.com/799347219207e1d45cb6ed52b9970357.png
Edit: Holding the power button for a very long time got the phone to show the "Google" logo again, I'll try and get it to boot into bootloader.
The phone is now in bootloader.
VincibleStatue4 said:
I get a sound when plugged into the computer, I'm not sure if I extracted the right files to the platform-tools thing or whatnot, I also entered "fastboot flash boot boot.img" not sure if any of those was ment to be the name of my image.
This is what my platform-tools folder looks like.
http://i.gyazo.com/799347219207e1d45cb6ed52b9970357.png
Click to expand...
Click to collapse
Stop doing commands!
You can't do anything until you get your phone into bootloader!
So try again to enter it!!!
PM me with your skype and ill help fix it just don't do any more stupid things!
krystyuc said:
Stop doing commands!
You can't do anything until you get your phone into bootloader!
So try again to enter it!!!
Click to expand...
Click to collapse
I only did the 1 command and the phone is now in bootloader.
VincibleStatue4 said:
I only did the 1 command and the phone is now in bootloader.
Click to expand...
Click to collapse
Good,give me your skype or yahoo id and ill guide you to every process.It'll show you a easyer method.
Don't worry the phone will be fixed.
Or check out this video https://www.youtube.com/watch?v=UzX5XHNy8S8
krystyuc said:
Good,give me your skype or yahoo id and ill guide you to every process.It'll show you a easyer method.
Don't worry the phone will be fixed.
Click to expand...
Click to collapse
I will PM you my skype now, thank you.
It's fixed no more problems.
yuhuu very helped bro

Categories

Resources