Database Info

[Rom][ACS][ODIN] ED12 Gingerbread 4/30 LINK NOW UP

Jez2cool and the Android Creative Syndicate present...
ED12 Gingerbread​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT!!!!! MUST READ
Disclaimer: Neither myself nor ACS are responsible for any damage that may occur to your personal device, and you hereby accept total responsibility for flashing said material to your device. As mentioned before, these have been tested and are in working order.
Official support for this and all ACS products at irc.fossnet.info #acs-users!
How to get your phone to stock ED12:​
1. Download File (Mirror) and Odin
2. Open Odin
3. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold 1 on the keyboard while powering up)
4. Connect phone to computer you should then see Odin put a Com (Number) in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning Odin can see it.
5. In the PDA Section place your tar for a full wipe and full return to Stock
6. Check reboot on the left with DebugEn (only those should be checked)
7. Hit start ( If it sits on File Analysis for longer than 1 min it’s not going to happen Redo Steps 2-7) you should see the progress bar then just wait for reboot.
8. ENJOY!!
​
Troubleshooting:
1. Reboot your PC
2. pull the battery on your phone
3. Wait for PC to reboot
4. Do steps 2-7 in section above
Known Bugs
-4G non-functional
- GPS non-functional out of the box - WORKAROUND: get GPS Status from the Market; reset AGPS status (works with wireless networks off)
- Wake lag present
- Does not boot when plugged in and powered off, unplug to boot
- Temperature sensor readings are incorrect. You may see interrupted charging due to bad battery temp readings.
HIT THE THANKS BUTTON. THANKS

Awesome thanks for this. One question does this use the ed12 modem?
Sent from my SPH-D700 using XDA Premium App

Awesome
Sent from my SPH-D700 using XDA App

Estewa_619 said:
Awesome thanks for this. One question does this use the ed12 modem?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
its the full tar it comes with all

Jez2cool said:
its the full tar it comes with all
Click to expand...
Click to collapse
OK cool. I ask cuz k0ane said there is 3g problems with the ed12 modem. I running it with the ec05 modem.
Sent from my SPH-D700 using XDA Premium App

Estewa_619 said:
OK cool. I ask cuz k0ane said there is 3g problems with the ed12 modem. I running it with the ec05 modem.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
For some phones yes but ec05 is a quick fix

Is it EXT4
Sent from my SPH-D700 using XDA App

E Dub78 said:
Is it EXT4
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Its a stock tar all stock Roms are RFS

Thanks!
Error 404 on the download link, though.

I was hoping Samsung wouldn't stick with RFS for gingerbread :/

bigray327 said:
Thanks!
Error 404 on the download link, though.
Click to expand...
Click to collapse
working on fix dont freak

Not in your public folder perhaps?

what are the main changes?

Daddy43205 said:
what are the main changes?
Click to expand...
Click to collapse
Gingerbread...man
android version 2.3.3 i believe

in the words of JIM CAREY ....... yes yes yes yes CAN YOU FEEL THAT http://bit.ly/ljHi0N

Daddy43205 said:
what are the main changes?
Click to expand...
Click to collapse
Facepalm...

Does the one click root work?
Sent From My Evo Killer!

Does anyone have a mirror? The file is broken.

Whosdaman said:
Does anyone have a mirror? The file is broken.
Click to expand...
Click to collapse
He said he's working on it ...
Im kinda waiting also lol

musclehead84 said:
Does the one click root work?
Sent From My Evo Killer!
Click to expand...
Click to collapse
Yes the 2.5.5 ...
Haven't tried the 3.0 since no need for it yet..

Captuvate help

I brought this phone last year and it turns to show me this picture
RST_STAT =0x1
PWIC_IRQ1 =0x0
PWIC_IRQ2 =0x0
PWIC_IRQ3 =0x0
PWIC_IRQ4 =0x0
PWIC_STATUS1=0x00
PWIC_STATUS2=0x0
What should I do?
Can I repair it?
Please help.

Try a Jig to get it in Download mode and then Odin/Heimdall a Stock Rom.
If u r on a pc, check out my signature below for some links...
Sent by XDA Premium App

I tried and no result
what I do wrong?

Looks like kernel panic. If your PC doesn't recognize your phone prior to using Odin to get back to stock, take the battery out for a few minutes and try again or use heimdall
Sent from my SGH-I897 using XDA

clipocel said:
I tried and no result
what I do wrong?
Click to expand...
Click to collapse
What specific result did u get...?
Sent by XDA Premium App

I must buy 3 100k resistors NEW because I make the jig but when I measure it it has 291 k
so i must go to my shop to buy the real ones
I will be back tomorrow with an answer
thx again guys

I think 291k should be enough resistance. I remember watching a video of someone using about 291k. But I could be mistaken. Please anyone correct me if I am wrong.
Sent from my Serendipity VII flashed Captivate using xda premium

hello again
i buyed all pieces I build the jig but still nothing
i tried also with a variable resistor of 500k and set it up to 300k, 301k, 291k but still nothing
Can you light me much further?
pls
thx

yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Please help
291k with the variable resistor IS THE WINNER
TRUST it
I will put a picture when i make 8 posts

clipocel said:
yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Click to expand...
Click to collapse
1. Go here and download a stock rom to install on your captivate.
http://forum.xda-developers.com/showthread.php?t=1300843
Instructions on how to do that are on this page. I suggest going for 2.3.5 gingerbread I897UCKJ3...with bootloaders, then flash the kernel with CWM which is what you use to install other roms.
2. If you are not happy with Gingerbread, and want to get ICS or other custom roms, go here and read up on how to install a new rom over stock.
http://forum.xda-developers.com/showthread.php?t=1350266
Actually, do read up on both stickies to have a better idea of the flashing process. I didn't know a damn thing about flashing 3 weeks ago, and now I've been flashing roms, kernels and modems without any problems. Just make sure to read everything carefully before doing anything. As for which rom is best...well, that's up to you to try and pick out which one is best for you.
Good luck.

hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my JIG, my winner

Damn Bricks!
Bricked my phone a few times and fixed it OK until i ran into the "ICS RESET PHONE" bug
Now the only way to fix is by tricking the phone into thinking the external sd card is the inernal sdcard....ADB SDK AVD...three big acronyms for IM SCREWED!
Or am I?
Found some people over at mobiletechvideos to apply the Unbrickable MOD created by Adam Outler (Genius of sorts).
Also they can provide someting called JTAG for very reasonable prices... that is unless you know you can fix it yourself. Which unfortunately I cant right now
or I would just because I know its possible, just not for me..right now.
I think its really sad that the only software to really screw up my phone ICS
was my favorite of all. I hope all is fixed when I get my Unbrickable phone back I CANT WAIT!!!!!!!!!

clipocel said:
hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
Click to expand...
Click to collapse
U could try flashin a newer modem.
I897ucKK4 of course is the latest for captivate.
Sent from my SAMSUNG-SGH-I777 using xda premium

this version of modem I already use it
I have a question : Can I put i9000 rom and stuff?
I know better how to deal with this version.
thx

Yep...as long as u use the ones in the captivate development forum because they have been ported and/or dev'd to work for the cappy--(reoriented kernels, etc, etc.)
Sent from my SAMSUNG-SGH-I777 using xda premium

is anything to tknow before I will try to put i9000 rom on my captivate?

Just read and read and read and be sure that u understand and know what u are doin, as well as the risks and rewards involved. And hit the Dev's thanks button for 'em. They put a lot of time and work in.
Sent from my SAMSUNG-SGH-I777 using xda premium

I think I did something wrong
help

U r soft bricked.
U need a Jig to get ur phone in download mode and then u can flash a Stock Firmware through Odin or Heimdall to get ur phone going again.
If u r on a pc, look in my signature link below. There are links there on how to make a jig or where to buy one.
--U can try to see if ur pc recognizes that screen as an alternate download mode 1st though, because some here have stated that they were able to do that with that screen.--
Sent from my SAMSUNG-SGH-I897 using xda premium

when i put my jig into phone it is show me the same picture.
what is wrong?

[Q] bad flash will not will not turn on!

to start, my phone is rooted and unlocked and ive flashed plenty of times. ive even lost my meid and restored it before but, this is different.
I downloaded slimbean rom which iv flashed before in the past and worked fine. when i flashed this time though (i always clear cach clear data) and soon at it was done i rebooted my phone and it completely turned of imediately( I had roughly 50% battery left). my computer recognizes my phone but the phones screen stays black and will not charge. It will not power on in any mode download recovery etc....
Any suggesttions guys?

Did u try battery pull?
Android 4 Life

Droopydroors said:
Did u try battery pull?
Android 4 Life
Click to expand...
Click to collapse
Or holding power down for 10-15 seconds?
Sent from my SPH-L710 using Tapatalk 2

What does or PC see the phone as? MTP, modem, adb?

barkermichaelj said:
Or holding power down for 10-15 seconds?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
ive done them both...they were my first things i tried..
I acctually think i may have downloaded a fake/corrupt rom..if it was a rom.
when i flashed it loaded extremely fast. my initial reaction was, wow this is super light weight but, it should have been a flag....i could be wrong.

billard412 said:
What does or PC see the phone as? MTP, modem, adb?
Click to expand...
Click to collapse
windows devic installation
hs-usb diagnostics 9008 (com-10)
my pc says its installed

A battery pull then volume up+home+power?
Sent from my SPH-L710 using Tapatalk 2

barkermichaelj said:
A battery pull then volume up+home+power?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
This!
or
Can you boot into Odin mode?

Something went wrong. Hate to tell you but, You're bricked.
Qhsusb_dload is what it should be but windows installed the diagnostic drivers instead. All in all, not what you want to see in device manager. its the kiss of death for our phone. Your gna need to jtag it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<<<<<-----bricked phone in device mgr

billard412 said:
Something went wrong. Hate to tell you but, You're bricked.
Qhsusb_dload is what it should be but windows installed the diagnostic drivers instead. All in all, not what you want to see in device manager. its the kiss of death for our phone. Your gna need to jtag it
<<<<<-----bricked phone in device mgr
Click to expand...
Click to collapse
. lets say i decide not to jtag it and just send my phone in for replacment through my warranty...is it void? can they tell? its free according to my warranty if the phone is "faulty". (either bad processor or something went wrong through a ota update) would that work?
whats gna and jtag?
thanks for the help!! thats all the questions i can think of lol

Sorry thats Gonna need JTAG ------>>> http://www.youtube.com/watch?v=XnA8Djs55Ds Technically yes your warranty is void. Samsung should/can see that you flashed it but you can send it to them and they will fix and send back according to other members. Appearently they arent checking/dont care. Verizon will probably replace it if you play stupid seeing as how it was "locked" and there no way you could messed with it *cough *cough. Although samsung can, Verizon cant tell in that state

Terry_blair said:
. lets say i decide not to jtag it and just send my phone in for replacment through my warranty...is it void? can they tell? its free according to my warranty if the phone is "faulty". (either bad processor or something went wrong through a ota update) would that work?
whats gna and jtag?
thanks for the help!! thats all the questions i can think of lol
Click to expand...
Click to collapse
You mean commit fraud? MD5sum. It exists for a reason. Admit your screw up and pay to have it jtaged.
Sent from my SCH-I535 using xda app-developers app

nosympathy said:
You mean commit fraud? MD5sum. It exists for a reason. Admit your screw up and pay to have it jtaged.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
^^^^Saw that coming.
why i always recomend jtag first. Then fraud only after its suggested by someone else. And i say **** it, verizon screwed people that bought it not knowing it was locked, time to screw em back
btw when was the last time you flashed a rom in recovery and it had an md5 on it? I mean lets get real here. MD5 wouldnt have saved him here anyway

You can use Android File Verify to make sure MD5 is correct. It is in the market....
Sent from my SCH-I535 using xda premium

Pull the bat wait a cpl seconds and just leave it on ur wall charger. It should come back on..
Sent from my GS3 using xda premium
---------- Post added at 07:45 PM ---------- Previous post was at 07:37 PM ----------
P2o8wer said:
Pull the bat wait a cpl seconds and just leave it on ur wall charger. It should come back on..
Sent from my GS3 using xda premium
Click to expand...
Click to collapse
Nevermind
Sent from my GS3 using xda premium

billard412 said:
^^^^Saw that coming.
why i always recomend jtag first. Then fraud only after its suggested by someone else. And i say **** it, verizon screwed people that bought it not knowing it was locked, time to screw em back
btw when was the last time you flashed a rom in recovery and it had an md5 on it? I mean lets get real here. MD5 wouldnt have saved him here anyway
Click to expand...
Click to collapse
Never seen a rom brick a phone on any device. If it did it is something new to the S3. Usually something else done wrong in the flashing procedure. Funny if you look at them all I've seen are coming back from AOKP.

Galaxy S4 Google Editions - Which one?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TOO. MANY. ROMs.
Seriously guys, which one are you guys going to flash?
I'm going nuts here. :silly:

The first one isn't giving me any issues at all. Seems flawless.
Sent from my GT-I9505G using xda premium

Using the JanJan one, just followed the steps, and it's freakin awesome

All those versions seems nice, I'm holding out til October to upgrade but seeing these roms make my wallet itch.
Sent from my SPH-L710 using xda premium

I'm using HazAnwar's latest one. I helped him deodex, root and zipalign and he fixed the broken wifi and camera. Now everything is smooooooooth sailing and Theshawty's happy! I'm sticking with this until I get the urge to flash AOSP.

Theshawty said:
I'm using HazAnwar's latest one. I helped him deodex, root and zipalign and he fixed the broken wifi and camera. Now everything is smooooooooth sailing and Theshawty's happy! I'm sticking with this until I get the urge to flash AOSP.
Click to expand...
Click to collapse
Wondering, is this flashable via Odin and would it then be okay to flash back if needed via Odin also?
Just wanted to clarify that because it's technically stock firmware if it increased the flash counter or not

KinetiClutch said:
Wondering, is this flashable via Odin and would it then be okay to flash back if needed via Odin also?
Just wanted to clarify that because it's technically stock firmware if it increased the flash counter or not
Click to expand...
Click to collapse
It's a CWM/TWRP flashable package. Don't worry too much about the counter crap. The only time you should ever bother about that is if you have to send your device in.

Theshawty said:
It's a CWM/TWRP flashable package. Don't worry too much about the counter crap. The only time you should ever bother about that is if you have to send your device in.
Click to expand...
Click to collapse
That's my only issue what if I do? Is It an easy or simple process?
Sent from my GT-I9505 using xda app-developers app

Are all have 9GB free space (16GB partitioned) ?
Sent using GT-i9505~

To clearify mine isn't a rom, its an installable deodex package that deodexes your current rom! So its more a mod.

Are they completely stable with everything working? This will be my first Sammy root/flash. Been holding out for the Google experience is it worth flashing now or waiting a bit for bugs to get ironed out
Sent from my GT-I9505 using xda premium

I've just flashed via CWM and the speed is unreal! this is seriously how the S4 should of bin.

As stable as stable can get with the Jan jan. I'm sure from the comments I'm reading the other ones are too
Sent from my GT-I9505G using xda premium

BIGSx420 said:
As stable as stable can get with the Jan jan. I'm sure from the comments I'm reading the other ones are too
Sent from my GT-I9505G using xda premium
Click to expand...
Click to collapse
One thing I didn't like about JanJan version is that there are a number of things we need to flash to make it work.
It doesn't come rooted either.

All I did was flash the KT-Kernal along with the rom, and everythings been running smooth
Sent from my GT-I9505G using xda premium

Oh yessss
But I don't think I'll be flashing of these.
I like the features of TouchWiz, and everything looks great thanks to master Vertumus

I've flashed two separate ROMs so far, and both are completely smooth except for one problem: I can't get mobile data to work.
Wifi works great, and when I'm connected through wifi the signal bars in the status bar turn blue. But as soon as I deactivate wifi, the signals turn grey and all Internet capabilities are lost. So, naturally, as soon as I'm outside of wifi range I can't use the Internet.
I'm still able to send messages and make phone calls.
Could this be a problem with the kTweaker kernel? I'm with Telstra in Australia.
Thanks

1337RYoN said:
Oh yessss
But I don't think I'll be flashing of these.
I like the features of TouchWiz, and everything looks great thanks to master Vertumus
Click to expand...
Click to collapse
the gimmicks? because this is still TW framework so any tw bloat and app and mod will work
Sent from my GT-I9505G using xda premium

simplecow said:
I've flashed two separate ROMs so far, and both are completely smooth except for one problem: I can't get mobile data to work.
Wifi works great, and when I'm connected through wifi the signal bars in the status bar turn blue. But as soon as I deactivate wifi, the signals turn grey and all Internet capabilities are lost. So, naturally, as soon as I'm outside of wifi range I can't use the Internet.
I'm still able to send messages and make phone calls.
Could this be a problem with the kTweaker kernel? I'm with Telstra in Australia.
Thanks
Click to expand...
Click to collapse
You just have to manually input you apn's again mate! I'm in the exact same boat

hey guys will any of these Roms work on a i9500?
Thanks
B

droid ultra maxx bricked... no breath... no bootloader no fastboot no ap fastboot..

hello sir... i was rooting my ultra maxx by a method with blbroke.bat. but after that i try to root.bat its take about 2 hours but not happen with my ultra maxx ... no recovery no fast boot no bootloader... sometime bling a green light near sencer... i dont know what can i do now.... its on 6-7 kk... i try alot method but still 0% success... help me thanks

Well unfortunately you're out of luck in this situation. What I recommend is to see if you have a warranty then you can send your phone and get the new one, just don't tell the carrier it was your fault just tell them you left it charge and its broken now. Good luck
Sent from my SAMSUNG-SM-G890A using Tapatalk

Sinmaker69 said:
Well unfortunately you're out of luck in this situation. What I recommend is to see if you have a warranty then you can send your phone and get the new one, just don't tell the carrier it was your fault just tell them you left it charge and its broken now. Good luck
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
thanks for reply ..... any other idea....

majjo1990 said:
thanks for reply ..... any other idea....
Click to expand...
Click to collapse
Try searching for forums with similar problems I believe it's call debricking or something because androids are similar so if someone have fixed it then it will probably work for you too
Sent from my SAMSUNG-SM-G890A using Tapatalk

Sinmaker69 said:
Try searching for forums with similar problems I believe it's call debricking or something because androids are similar so if someone have fixed it then it will probably work for you too
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
okay sir thanks.... i am waiting may be someone help ....

u didn t charge the phone enough to have all the tim to make upload the system to phone.
if u upload the bootloader file,u can restore to stock firmware.
try it

danger2u said:
u didn t charge the phone enough to have all the tim to make upload the system to phone.
if u upload the bootloader file,u can restore to stock firmware.
try it
Click to expand...
Click to collapse
how i can charge even its tottly died.....

majjo1990 said:
how i can charge even its tottly died.....
Click to expand...
Click to collapse
need a fastboot adapter
i will provide u a link soon
Inviato dal mio XT1080 utilizzando Tapatalk

danger2u said:
need a fastboot adapter
i will provide u a link soon
Inviato dal mio XT1080 utilizzando Tapatalk
Click to expand...
Click to collapse
thank you so much i m waiting.....

Hi friend
Hi, I'm using Google translator, so forgive errors.
I do not know if you know a little Spanish (help me more) I'm from Mexico, Mexicali Baja Califoria, to be exact.
I have a Droid Mini XT1030 and I had the same problem trying to give you root the phone. But I need the details to help you better. Send me a message with your detailed problem (The tutorial you were following the model of the mobile version of android, stuff) also steps you followed. I hope to be helpful.

today i try many methods.... now its give me a very small breath ... like 5 to 10 seconds... i see some messages like:
failed to hab check for gpt_mainx4e
cid read failure
invaild cid status 0x69
customer id error. contect dealer: oxdead
fastboot reason invalid cid.

In the zip file for the CrashXXL blbroke method, there is a batch file called Run_SBL.bat ... This should pull your phone out of Qualcomm mode. If you reboot and see the "M" logo you'll be able to get back into fastboot and reflash. As someone mentioned before, you'll need a factory cable if your battery is dead.

DmdStar said:
In the zip file for the CrashXXL blbroke method, there is a batch file called Run_SBL.bat ... This should pull your phone out of Qualcomm mode. If you reboot and see the "M" logo you'll be able to get back into fastboot and reflash. As someone mentioned before, you'll need a factory cable if your battery is dead.
Click to expand...
Click to collapse
sir what you mean of factory cable???

majjo1990 said:
sir what you mean of factory cable???
Click to expand...
Click to collapse
I explained it earlier in the the thread. You can also google Motorola factory cable for info. I bought mine from Amazon.
Sent from my XT1080 using Tapatalk

DmdStar said:
I explained it earlier in the the thread. You can also google Motorola factory cable for info. I bought mine from Amazon.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
...is needed to short in cable VCC to ID (host). Thats all
Or you can remove battery and connect to battery pins 3.7V from external power supply.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

CornholioGSM said:
...is needed to short in cable Ground to ID (host). Thats all
Or you can remove battery and connect to battery pins 3.7V from external power supply.
Click to expand...
Click to collapse
This phone doesn't have removable battery. Factory cable would be way easier.
Sent from my XT1080 using Tapatalk

DmdStar said:
This phone doesn't have removable battery. Factory cable would be way easier.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
...all phones have removable batteries

CornholioGSM said:
...all phones have removable batteries
Click to expand...
Click to collapse
Lol... I'm not fielding those questions.
Sent from my XT1080 using Tapatalk

use this file.
Unbrick_SU6-7
solve your problem 100%.
http://s3.picofile.com/file/82044228...SU6_7.rar.html
http://uploadboy.com/mkelk9txjjkz.html

jalal-jap said:
use this file.
Unbrick_SU6-7
solve your problem 100%.
http://s3.picofile.com/file/82044228...SU6_7.rar.html
http://uploadboy.com/mkelk9txjjkz.html
Click to expand...
Click to collapse
sorry sir file is not downloading by this website.... any solution...