Hi to all i'm a noob on tablet and i wanna need some thing first i update.
I have a wowpad 10'' with a deb-r2.1.1001, i can update to 1623???
when i enter on the recovery with ( home+power+ circle) i can't select nothing, i can't move with volume - + the system do the recovery without asking nothing.
Tnks to all and sorry for my english
Hey guys I updated my Razr HD to JB then after that factory reset then never boot up and just a boot cycle between motorola logo and dead android logo and retailer replaced that for me.and second one the same problem again and they send it to repair .they called me from repair centre that your mobile is rooted and you should pay and the thing is i didnt root and i dont know how to root and they said you installed an app and the app rooted your device by itself. Funny isnt it? I told them that i just indtalled flash player from xda and they said yesss they hacked yr device and rooted it by flash player so blah blah blah. Im with telstra australia and just wondering anyone with telestra in australia has this problem. Factory reset after jb update i saw other people with this issue.i appreciate anyhelp or test thank you in advanced.
M4zi4r said:
Hey guys I updated my Razr HD to JB then after that factory reset then never boot up and just a boot cycle between motorola logo and dead android logo and retailer replaced that for me.and second one the same problem again and they send it to repair .they called me from repair centre that your mobile is rooted and you should pay and the thing is i didnt root and i dont know how to root and they said you installed an app and the app rooted your device by itself. Funny isnt it? I told them that i just indtalled flash player from xda and they said yesss they hacked yr device and rooted it by flash player so blah blah blah. Im with telstra australia and just wondering anyone with telestra in australia has this problem. Factory reset after jb update i saw other people with this issue.i appreciate anyhelp or test thank you in advanced.
Click to expand...
Click to collapse
I had the exact same problem with my first handset and there was a thread in here somewhere. Took it back to Fone Zone and they replaced the handset for me as it was within the first 30 days. After the replacement I brought the handset home and let JB install before doing anything else. Has been solid and I wouldn't want to risk having the same thing happen again.
Ruxin said:
I had the exact same problem with my first handset and there was a thread in here somewhere. Took it back to Fone Zone and they replaced the handset for me as it was within the first 30 days. After the replacement I brought the handset home and let JB install before doing anything else. Has been solid and I wouldn't want to risk having the same thing happen again.
Click to expand...
Click to collapse
Hey. Mine is in 30 days too but because it was the second one they did not replace.you did not factory reset yeah? Its the issue with factory reset im sure. Im waiting . I dont know what they gonna do and its not fair.
M4zi4r said:
Hey. Mine is in 30 days too but because it was the second one they did not replace.you did not factory reset yeah? Its the issue with factory reset im sure. Im waiting . I dont know what they gonna do and its not fair.
Click to expand...
Click to collapse
First handset was factory reset after the update to JB. Second was not.
I was lucky that I got my phone through Fone Zone as they are a reseller which is why I was allowed to swap it out, but if I had got it through Telstra they would have needed to send it away to assess it because that's their policy.
Fix
I had the exact same problem that you describe on a phone from french carrier SFR.
Update to jelly bean ==> factory reset ==> dead device.
I followed the steps in the alternate method for factory reset of the "old" razr (xt910)
The trick worked for me (XT 925) I saw some french people that also managed to recover it this way:
(I found it on verizon website but don't have the righ to post link yet)
1] Power the device off.
---(Note Press the Power button then select Power off.)
---(Note If the device doesn't respond to input, press and hold the Volume Up/Down then press and hold Power button. When the device screen goes blank release the Power button while continuing to hold Volume Up/Down, proceed with step 3.)
2] Press and hold the Volume Up/Down then press the Power button.
3] When presented with the Boot Mode Selection Menu release all buttons.
4] Press Volume Down to select Recovery then press Volume Up.
5] From the Droid triage screen, simultaneously press Volume Up/Down.
6] Select wipe data /Factory Reset then press the Power button.
---(Note Use Volume keys to navigate options.)
7] Select Yes -- delete all user data then press the Power button.
---(Note Use Volume keys to navigate options.)
---(Note Data wipe may take several moments.)
8] Select reboot system now then press the Power button.
---(Note Use Volume keys to navigate options.)
Hope that can help someone !
Try booting into recovery and wiping cache.
I have yet to see an app than can root your phone without you knowing. Bollocks....
HEllo,
Yestarday i puted on my TF300T cynagogen rom. To did it before i unlock the bootloader and put a recovery in fastboot mode (all seems succed because i well the devise is unlocked at startup) BUT i do a wipe cashe, and reboot my TF300T too earlier i guess... now my TF300T cannot reboot and it stucks to the screen logo with msg at top right (devise is unlocked)...
I'm very sad.. and try to correct this issue :
- i cannot use adb and fastboot (devise no recognize because F300T did not start and stuck at logo screen)
- i install android drivers
- i can use APX mode
In APX mode i try to ip contains in this zip file download from asus : TF300T-WW_epad-10_6_1_27_5-UpdateLauncher.zip (put in SDcard)
but i have no update message so i search another solution...
I see that there is a tools "NVFlash" but i m not really technicall and i don't really understand ... because in this step :
https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
it write to begin "connect in fastbooot mode", ... me ? i cannot connect to fastbootmode, juste APX...
So if somebody can help me to unlock my tablette and resused it ...
Thanks a lot...
Rgds
To use nvflash you need a set of files that are special for your device. If you have not created them before, nvflash won't help you now.
However there are a lot of things people tried successfully to get into fastboot mode. Search a little in the forums. Some quick examples: hold power and vol-down for more than 10 secs, use the reset hole and vol-down, power off and attach the charger holding vol-down, etc.
Sent from my TF300T using Tapatalk
Honestly i sought during 4 hours yesterday if i posted a message it because im desesparate. I already try all solutions that you are talking about except the reset hole... I will try it tonight
Thanks
Hi again,
nothing works, i test reset button et vol down but i still have logo Asus, inspiring innovation, persistent perfection"
and message the device is unlocked.
And when i connect no fastboot devices detected i g
have
" waiting for devise "
I guess it's deads for me tablet is KO there is no more bootloader (when tablet was KO yesterday it's after the "wipe data" at bootloader... so i guess i can
put my tablet in the recycler bin.
Thanks.
the issue :
The big problem: Ultimately... when I rebooted the tablet, I just see the initial "ASUS" screen with "The Device is UnLocked." in the top-left corner. When I hold the power button to turn it off... it powers back on within a few seconds, and stays at the "ASUS" screen again. It will not stay off... and will not show anything but the "ASUS" splash screen. (With one exception, described later - "the only ray of hope...") If I hold the volume up or down buttons when powering on the device, absolutely nothing different happens. (since it doesn't STAY off... I've tried all kinds of different combinations of pushing/holding the appropriate buttons for when the tablet comes back on) IMPORTANT: I never see the "three icons" as expected when holding the volume button(s). No RCK, USB, etc... when the unit turns back on, it goes to the ASUS screen, and stays there until the battery dies. As a result... I can't get into recovery, fastboot, whatever in the traditional way. I have Just APX.
Pressing the reset button alone, or reset + volume down has the effect of temporarily turning off the unit and then on again, the same as holding the power button to turn it off and letting it turn itself back on again.
Which version of CWM did you use?
First, recovery-clockwork-5.5.0.4-tf300t.img from koush's ClockworkMod Recovery: (WARNING: this does not work with the newer Jelly Bean versions. Flashing this will brick your tablet!) download
ANd after i said **** i have JB 4.2.1 ... but at this time tablet works
after i download this :
http://forum.xda-developers.com/attachment.php?attachmentid=1077648&d=1337726179
Tablet always works.. then in recovery i have three icon RCK , ANDROID and WIPE and i did a mistake and click on WIPE and after it was ... the blackout for my tablette
I know that i did a mistake ... a mistake which cost me 326 e
So as there is no solution on, could you confirm me if I buy a motherbroard for my TF300T it will be ok ? Or i need to change something else ? Thanks
reikanou said:
So as there is no solution on, could you confirm me if I buy a motherbroard for my TF300T it will be ok ? Or i need to change something else ? Thanks
Click to expand...
Click to collapse
A working motherboard (new or used) will certainly solve your problem. Just be careful in replacing it. If you need more info on this, holler.
Hum ok thans i will do that but i told me mother cost .. 80 € ... 130 €.. and a new : 160 €.. and there is a possibility that it didn't work..
Can i put a motherbroad 32 Go on my tablette 16 Go ?
there is somme tablette 8" as nexus galaxy tab 3 .. between 150 e and 200 e ...
So now it's a reflexion about athat
Best Rgs,
reikanou said:
Hum ok thans i will do that but i told me mother cost .. 80 € ... 130 €.. and a new : 160 €.. and there is a possibility that it didn't work..
Can i put a motherbroad 32 Go on my tablette 16 Go ?
there is somme tablette 8" as nexus galaxy tab 3 .. between 150 e and 200 e ...
So now it's a reflexion about athat
Best Rgs,
Click to expand...
Click to collapse
It all boils down to personal preferences. You can always install a 32GB motherboard on a 16GB tab, The only difference in hardware is the internal storage capacity. I'd say if you can find a used working motherboard for a reasonable price, go for it. I've tried the galaxy tab 3, which I don't think has the same computing capability as the TF300, and a smaller screen, but it's newer.
I buy the motherbroad 60€. I will keep inform about replace of it
Thanks a lot
reikanou said:
I buy the motherbroad 60€. I will keep inform about replace of it
Thanks a lot
Click to expand...
Click to collapse
A friendly reminder: Don't go it alone if you're unsure. THIS thread should provide you with all the essential information about how to replace it. If it's too long, remember to first, right after you take the back cover off, turn off the service switch (the attached thumb shows its location at the top), and be careful with the power button ribbon at the right top corner when you look at the tab from the back.
When i will receipt motherbroad i will follow this guide :
http://forum.xda-developers.com/showthread.php?t=2368372
When i rremount the motherboard, soulhd i put some glue on CPU to fix the orange object ?
Thanks a lot for your answer.
Hi guys.
I have a problem with my new tablet.
I rooted it with Kingroot, and had no problems for about a week. Then it began to be a bit slow, so i pressed reset in the settings menu (without deleting the root), and now it won't start up again.
I tried soft reset, hard reset and the part where you press the Power button + Volume up button, but it's stuck on the "Powered by Android" screen, and has been for 6 days.
Anyone know what i have to do? It's brand new.
Many greetings from Martin, Denmark
MartinBjorn said:
Hi guys.
I have a problem with my new tablet.
I rooted it with Kingroot, and had no problems for about a week. Then it began to be a bit slow, so i pressed reset in the settings menu (without deleting the root), and now it won't start up again.
I tried soft reset, hard reset and the part where you press the Power button + Volume up button, but it's stuck on the "Powered by Android" screen, and has been for 6 days.
Anyone know what i have to do? It's brand new.
Many greetings from Martin, Denmark
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here. This thread seems to be the most relevant for your issue:
[Guide] Lenovo Tab 2 A10-70 Root, Recovery, Xposed and Others
Try posting your query there. Experts there may be able to help you.
Good luck
1º thanks for all your help
2º Sorry for my bad english
3º I have a Samsung Galaxy Tab 2 10.1 GT-P5110, it has got a lot of viruses. I have found the Stock firmware and i have installed it with "ODIN". The problem was when the tablet restarted, all the aplications was installed and the virus too.
Can you help me, what steps i must do? Because iwant to install the rom and to delete the virus.
I think that im doing a really noob question, but i cant find the answer by me self.
Thanks for your help friends!!!
Nice to meet you!!
Go to recovery mode (can be accessed by powering down tablet, then holding down the volume up button while powering on) then navigate the recovery mode by using up and down volume keys as arrow keys and power button as select. Choose wipe factory data and select yes, then wipe cache. Then reboot system now. Finished! Leave a thanks if I helped!