Database Info

GALAXY Y Boots only in Stock ROM even after flash

I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.

Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

[email protected] said:
Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Click to expand...
Click to collapse
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.

try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium

DJDSB said:
try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium
Click to expand...
Click to collapse
I have tried the following steps:
1. Odin stock rom: I just have pda,csc and modem. I do not have bootloader and pit.
2. Then went to Recovery and installed CWM
3. Installed custom rom JELLY Blast which previously had no issues. (Before this I wiped data,cache & dalvik)
4. Result - > Stuck on Samsung screen.
After which I cannot get back to any recovery mode anymore, it is stuck on samsung screen. All I have to do is go back to download mode and odin it again. But I really want to be back on custom roms

pavitar said:
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.
Click to expand...
Click to collapse
Yes u have to install rom by normal way
Updare your cwm to V6
Cwm will ask u to disable it
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

Generic Rom Flashing Issues
pavitar said:
I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.
Click to expand...
Click to collapse
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.

keeploving said:
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.
Click to expand...
Click to collapse
Thanks a Ton, this helped me. The only step I did not perform earlier is Fix Permissions.

[Q] ViperS 3.1.2 + Sensation XE

Hi.
I want to switch to ViperS 3.1.2 but have few questions before I do so. I've never done it before so I'm new to this.
Does it come rooted (or do all ROMs come rooted)?
Is there any instruction on how to do it or just flash it from .zip via the recovery mode (I have CWM 5.x.x installed already)?
And are there any bugs with it such as Wi-Fi problems/tethering, or calls (speaker)?
Also, what if something goes wrong? I've got a backup of my current ROM (stock), so do I just flash that one back or try ViperS' in case it was a mistake on my side?
Lastly, I've heard some people mentioning OTA updates. I'm assuming it's done in the same way as stock ROMs, so you just need Wi-Fi/working internet and the new update will install on its own, or do I have to download the update from here and then do it myself?
Thanks!

MrCatalyst said:
Hi.
I want to switch to ViperS 3.1.2 but have few questions before I do so. I've never done it before so I'm new to this.
Does it come rooted (or do all ROMs come rooted)?
Is there any instruction on how to do it or just flash it from .zip via the recovery mode (I have CWM 5.x.x installed already)?
And are there any bugs with it such as Wi-Fi problems/tethering, or calls (speaker)?
Also, what if something goes wrong? I've got a backup of my current ROM (stock), so do I just flash that one back or try ViperS' in case it was a mistake on my side?
Lastly, I've heard some people mentioning OTA updates. I'm assuming it's done in the same way as stock ROMs, so you just need Wi-Fi/working internet and the new update will install on its own, or do I have to download the update from here and then do it myself?
Thanks!
Click to expand...
Click to collapse
Are you S-Off or S-On? If S-Off then you can flash the zip directly from recovery and if you're S-On then you gotta flash 4EXT recovery first and enable smart flash feature and then flash the zip file.
There are no major bugs in the Rom except the ones listed on the OP of the official thread. Enjoy flashing.
Sent from my HTC Sensation Z710e using xda app-developers app

I'm S-Off. I've had root earlier but I've installed SuperSU and accidentally pressed Clean SU which has pretty much wiped it. :|

Post your bootloader details to make things more clearer. Flashing a custom Rom doesn't need root access. You can flash it as you're s-off.
What Rom you're using currently? What firmware?
Sent from my HTC Sensation Z710e using xda app-developers app

I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?

MrCatalyst said:
I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?
Click to expand...
Click to collapse
Yup they come pre-rooted

Thanks for the help, everyone! Managed to install the ROM, despite being stuck in bootloop for 2 hours but it works flawlessly now.

MrCatalyst said:
I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?
Click to expand...
Click to collapse
Most roms come rooted, and the rest provide root tools so you have a choice while flashing.
To return to stock look up ruu. An ruu + s on = your device as it came.

If you had flashed Firmware-3.33 before the ROM - you would have had no "bootloops" at all! The most important thing is to have Firmware-3.33

Rom is broken , EMERGENCY , plz help
Hello everybody. I'm in a real trouble with my phone. it's very emergency , so i really need your help please. My ViperS 3.1.2 is broken and doesn't boot. i reinstalled Rom without wiping and again with update only setting but still doesn't boot.I flashed boot.img again but still... i did everything i could such as wiping cache and dalvik cache but again the same problem. the phone stays on "SENSATION" boot screen with beats audio on bottom for 20 seconds and suddenly screen become dark and phone restarts . i wiped dalvik and again "android is upgrading" starts and after it finished the phone restarts again i know if i perform a full wipe during Rom installation it will be fixed but i REALLY,REALLY,REALLY need my contacts and messages.... is there anyway i could fix my phone or make a backup of contacts and messages??? PLEEAAASSSE help me . tnx

VAHIDHAVASBEIGY said:
Hello everybody. I'm in a real trouble with my phone. it's very emergency , so i really need your help please. My ViperS 3.1.2 is broken and doesn't boot. i reinstalled Rom without wiping and again with update only setting but still doesn't boot.I flashed boot.img again but still... i did everything i could such as wiping cache and dalvik cache but again the same problem. the phone stays on "SENSATION" boot screen with beats audio on bottom for 20 seconds and suddenly screen become dark and phone restarts . i wiped dalvik and again "android is upgrading" starts and after it finished the phone restarts again i know if i perform a full wipe during Rom installation it will be fixed but i REALLY,REALLY,REALLY need my contacts and messages.... is there anyway i could fix my phone or make a backup of contacts and messages??? PLEEAAASSSE help me . tnx
Click to expand...
Click to collapse
If you made a backup before flashing you should restore it, or else flash the ROM you had before flashing.
Then use "Titanium Backup" and back up your messages (your contacts are automatically synced with your google account, unless you saved them on the phone, but you can change that with the "people" app.
after you backed your phone up, make a full wipe, and flash the new ROM. Install Titanium Backup and restore your messages backup.
Good luck.

astar26 said:
If you made a backup before flashing you should restore it, or else flash the ROM you had before flashing.
Then use "Titanium Backup" and back up your messages (your contacts are automatically synced with your google account, unless you saved them on the phone, but you can change that with the "people" app.
after you backed your phone up, make a full wipe, and flash the new ROM. Install Titanium Backup and restore your messages backup.
Good luck.
Click to expand...
Click to collapse
excuse me, you said 2 options . first is to restore backup , unfortunately i don't have backup. second is flashing the rom i had before flashing ! i didn't understand what you said... what do you mean? i don't have any backup, if you can help me to boot up phone just for 2 mins to backup my contacts! they aren't synced to my google account....

pleeeeaaaaaaaaaasssseeeee helppp meee. i am becoming crazyy because of my problem.... HELP PLZZZ :crying:

VAHIDHAVASBEIGY said:
excuse me, you said 2 options . first is to restore backup , unfortunately i don't have backup. second is flashing the rom i had before flashing ! i didn't understand what you said... what do you mean? i don't have any backup, if you can help me to boot up phone just for 2 mins to backup my contacts! they aren't synced to my google account....
Click to expand...
Click to collapse
Get a download of the ROM you had before, and you can flash it normally. If you had stock, find a download of stock ROM (although Sense 3.6 custom ROMs might actually work too).

Right
i dont had a Problem :good:

astar26 said:
Get a download of the ROM you had before, and you can flash it normally. If you had stock, find a download of stock ROM (although Sense 3.6 custom ROMs might actually work too).
Click to expand...
Click to collapse
excuse me again! you mean install another ROM without Wiping on ViperS? I am using ViperS for about 1 years, Are you sure? now i should download another ROM like Android Revolution HD for sensation and install it on my phone without performing full wipe and it can fix boot problem?

VAHIDHAVASBEIGY said:
excuse me again! you mean install another ROM without Wiping on ViperS? I am using ViperS for about 1 years, Are you sure? now i should download another ROM like Android Revolution HD for sensation and install it on my phone without performing full wipe and it can fix boot problem?
Click to expand...
Click to collapse
Oh no, I thought you wanted to flash viperS. Flash the ROM you had before flashing, whichever ROM that was (but flash that specific ROM, not a different one. My advice from the previous comment was if you came from stock ROM). If you flash the same ROM you don't have to wipe, and then you can back up your phone.

astar26 said:
Oh no, I thought you wanted to flash viperS. Flash the ROM you had before flashing, whichever ROM that was (but flash that specific ROM, not a different one. My advice from the previous comment was if you came from stock ROM). If you flash the same ROM you don't have to wipe, and then you can back up your phone.
Click to expand...
Click to collapse
ohhh , in my first post i said ( i reinstalled Rom without wiping and again ...) i mean i did your advice , but it doesn't fix my problem... :crying:

VAHIDHAVASBEIGY said:
ohhh , in my first post i said ( i reinstalled Rom without wiping and again ...) i mean i did your advice , but it doesn't fix my problem... :crying:
Click to expand...
Click to collapse
I hope you can operate adb, because the solution I found requires it.
Go to recovery, and use adbto pull the contacts database with the following command:
adb pull data/data/com.android.providers.contacts/databases/contacts.db
It might give an error for a protected directory (but I don't know since it's going to be done in recovery), if that happens, use 'adb shell' and then 'su'. then exit, and you have root access to the device (do it only if required).
Once you obtained the file, it should be on your adb folder. you need to open it with a database app which supports SQLite3 (I won't reccomend anyrhing since I've never used them. but from a quick search I found a few. and searching in the context of reading android databases would give some recommendations.).
Good luck
p.s - It's hard for me to believe this is the simplest solution. It might work, but it's not easy. So others might give better solutions.

astar26 said:
I hope you can operate adb, because the solution I found requires it.
Go to recovery, and use adbto pull the contacts database with the following command:
adb pull data/data/com.android.providers.contacts/databases/contacts.db
It might give an error for a protected directory (but I don't know since it's going to be done in recovery), if that happens, use 'adb shell' and then 'su'. then exit, and you have root access to the device (do it only if required).
Once you obtained the file, it should be on your adb folder. you need to open it with a database app which supports SQLite3 (I won't reccomend anyrhing since I've never used them. but from a quick search I found a few. and searching in the context of reading android databases would give some recommendations.).
Good luck
p.s - It's hard for me to believe this is the simplest solution. It might work, but it's not easy. So others might give better solutions.
Click to expand...
Click to collapse
tnx , if i try i can do it. i can operate adb easily . but a person said me to backup /data partition with recovery and then perform a full wipe and install viperS again then restore /data . do you have any idea abou it? can it help?

[Q] Installation aborted

Hi,
I’m really new at rooting and was just following videos…
I rooted my Samsung Galaxy Tab 2 7.0 P3113 (with CWM recovery) no problem…superuser app all good. I found droidcheats youtube video to install the CM10.2 (cyanogenmod) Jellybean 4.3 rom
https://www.youtube.com/watch?v=uooLuG0Ydr8&list=WLjdPTB2mWRMy4mUvbarAjZEaZRdNawRmD
I downloaded the rom, google apps, tablet ui, and CWM recovery update.
Xda Thread from Codyf86:
http://forum.xda-developers.com/showt...
ClockWorkMod Recovery flashable update:
https://www.file1.info/Rzhs9La
Checked USB debugging, moved files to device, unplugged and put into recovery mode, now 6.0.1.1 version, updated CWM, advanced boot recovery, now version 6.0.3.7, wiped data factory reset, wiped dalik cache, flashed rom….installation aborted.
Looks like I installed the wrong rom file.
Now I’m stuck in recovery or at reboot screen. I think I have the right rom file now but my computer doesn’t recognize my device.
I’m not sure what to do next…Can you help.
Thanks

sd card
I'm thinking if I install the correct rom from the micro sd card, it might work?
ladyrae said:
Hi,
I’m really new at rooting and was just following videos…
I rooted my Samsung Galaxy Tab 2 7.0 P3113 (with CWM recovery) no problem…superuser app all good. I found droidcheats youtube video to install the CM10.2 (cyanogenmod) Jellybean 4.3 rom
https://www.youtube.com/watch?v=uooLuG0Ydr8&list=WLjdPTB2mWRMy4mUvbarAjZEaZRdNawRmD
I downloaded the rom, google apps, tablet ui, and CWM recovery update.
Xda Thread from Codyf86:
http://forum.xda-developers.com/showt...
ClockWorkMod Recovery flashable update:
https://www.file1.info/Rzhs9La
Checked USB debugging, moved files to device, unplugged and put into recovery mode, now 6.0.1.1 version, updated CWM, advanced boot recovery, now version 6.0.3.7, wiped data factory reset, wiped dalik cache, flashed rom….installation aborted.
Looks like I installed the wrong rom file.
Now I’m stuck in recovery or at reboot screen. I think I have the right rom file now but my computer doesn’t recognize my device.
I’m not sure what to do next…Can you help.
Thanks
Click to expand...
Click to collapse

ladyrae said:
I'm thinking if I install the correct rom from the micro sd card, it might work?
Click to expand...
Click to collapse
edit: nevermind, re-read your OP.

Thanks for trying
RikRong said:
edit: nevermind, re-read your OP.
Click to expand...
Click to collapse
I'm really lost...guess I shouldn't have got into this without knowing what to do if something goes wrong.

ladyrae said:
I'm really lost...guess I shouldn't have got into this without knowing what to do if something goes wrong.
Click to expand...
Click to collapse
brother reverting back to stock rom will help you
good luck :good::good:

Thanks
I just found a video on that...thank-you, wish me luck
aditya rathee said:
brother reverting back to stock rom will help you
good luck :good::good:
Click to expand...
Click to collapse

ladyrae said:
I just found a video on that...thank-you, wish me luck
Click to expand...
Click to collapse
you will succeed brother :good::good::good::good:

[Q] First boot taking forever .

Hi ,guys .
So my problem is the first boot (on my p3110 )takes an eternity , whatever I'm trying to flash it wouldn't succesfully have the first boot .
I've tried omni,slimkat and CM but nothing works .
Dumb I was ,in my blind tries, I've deleted my backups and now the only place i can flash is my microSD card.
Help please , I'm really stuck . :crying:

TheHelplessGuy said:
Hi ,guys .
So my problem is the first boot (on my p3110 )takes an eternity , whatever I'm trying to flash it wouldn't succesfully have the first boot .
I've tried omni,slimkat and CM but nothing works .
Dumb I was ,in my blind tries, I've deleted my backups and now the only place i can flash is my microSD card.
Help please , I'm really stuck . :crying:
Click to expand...
Click to collapse
The first boot always takes longer as it is setting up, but no longer than ~5 minutes.
Anyway... If you've waited and it is boot looping, try these steps:
Make sure your recovery is up to date.
Wipe system, data, cache, and dalvik cache.
Flash ROM, gapps, and any addons
Wipe cache and dalvik
Reboot. After first reboot is complete and on setup screen, wait 5 minutes and reboot into recovery.
Wipe cache and dalvik again. Reboot
This reboot could also take ~5 minutes, but the others shouldn't as long as you don't wipe cache and dalvik.
You should see an "Android is Upgrading" screen. After this is done, complete setup and you should be good to go.
Sent from my SGH-T989

The same
jrc2 said:
The first boot always takes longer as it is setting up, but no longer than ~5 minutes.
Anyway... If you've waited and it is boot looping, try these steps:
Make sure your recovery is up to date.
Wipe system, data, cache, and dalvik cache.
Flash ROM, gapps, and any addons
Wipe cache and dalvik
Reboot. After first reboot is complete and on setup screen, wait 5 minutes and reboot into recovery.
Wipe cache and dalvik again. Reboot
This reboot could also take ~5 minutes, but the others shouldn't as long as you don't wipe cache and dalvik.
You should see an "Android is Upgrading" screen. After this is done, complete setup and you should be good to go.
Sent from my SGH-T989
Click to expand...
Click to collapse
The same loading image .(You know ,when you first boot something it appears the custom flash's logo) . what can i do ?

TheHelplessGuy said:
The same loading image .(You know ,when you first boot something it appears the custom flash's logo) . what can i do ?
Click to expand...
Click to collapse
How long have you tried waiting? Which room door you flash on which device?
Sent from my SGH-T989

jrc2 said:
How long have you tried waiting? Which room door you flash on which device?
Sent from my SGH-T989
Click to expand...
Click to collapse
I've waited more than usual 5-10 mins ,even 6 hours ,but nothing, ,I'm curently trying to flash slimkat 4.4.4 but i've tried omni ,CM all kitkat .
What is your advice ?

TheHelplessGuy said:
I've waited more than usual 5-10 mins ,even 6 hours ,but nothing, ,I'm curently trying to flash slimkat 4.4.4 but i've tried omni ,CM all kitkat .
What is your advice ?
Click to expand...
Click to collapse
What version of unroofed TouchWiz were you running before rooting and flashing?
Sent from my SGH-T989

jrc2 said:
What version of unroofed TouchWiz were you running before rooting and flashing?
Sent from my SGH-T989
Click to expand...
Click to collapse
The one with Android 4.1 my guess is Nature UX

TheHelplessGuy said:
The one with Android 4.1 my guess is Nature UX
Click to expand...
Click to collapse
Then idk what the problem is. You were on jelly bean already so that isn't a problem.
Sent from my SGH-T989

jrc2 said:
Then idk what the problem is. You were on jelly bean already so that isn't a problem.
Sent from my SGH-T989
Click to expand...
Click to collapse
What do you suggest ?

TheHelplessGuy said:
What do you suggest ?
Click to expand...
Click to collapse
I don't know, sadly. Maybe someone else will know and we'll both learn something.
Sent from my SGH-T989

Back to stock rom for now, prepare (charge until full).
Re-root, then reboot to recovery to try again flashing the rom.
Always format /system, /cache, /data/media first when installing different roms. Good luck

150208 said:
Back to stock rom for now, prepare (charge until full).
Re-root, then reboot to recovery to try again flashing the rom.
Always format /system, /cache, /data/media first when installing different roms. Good luck
Click to expand...
Click to collapse
I did exactly as you said but nothing happened .
1. It's a problem that i install zips from my external storage ?
2.Do you know where i can find a nandroid backup to download ?
3.What do you suggest for my issue ?

TheHelplessGuy said:
I did exactly as you said but nothing happened .
1. It's a problem that i install zips from my external storage ?
2.Do you know where i can find a nandroid backup to download ?
3.What do you suggest for my issue ?
Click to expand...
Click to collapse
Stock rom is working fine? Is root working on stock?
Did you get any errors while flashing costom roms?
I remember a folk here got a same problem as you, and i think it's not resolved yet..
Maybe you and him have a "special" devices.
Don't worry, it's not a problem with your ext-sd because i use it all the time. and if it was ext-sd problem, you'll get an error while flashing.
I suggest messages devs in developement section, maybe they can figure out what is wrong.
And of course i think it's not safe to restore others nandroid backup, so don't mind find it.
God speed, wish I can help you more :angel:

150208 said:
Stock rom is working fine? Is root working on stock?
Did you get any errors while flashing costom roms?
I remember a folk here got a same problem as you, and i think it's not resolved yet..
Maybe you and him have a "special" devices.
Don't worry, it's not a problem with your ext-sd because i use it all the time. and if it was ext-sd problem, you'll get an error while flashing.
I suggest messages devs in developement section, maybe they can figure out what is wrong.
And of course i think it's not safe to restore others nandroid backup, so don't mind find it.
God speed, wish I can help you more :angel:
Click to expand...
Click to collapse
Sadly my stock rom is gone.
So yesterday when I've rerooted whit your link I've received two errors :
- SOKP and when I've flash it something like poped up : E:Cannot write to sd card clockworkmod recovery etc.
- CM 11 :
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix

TheHelplessGuy said:
Sadly my stock rom is gone.
So yesterday when I've rerooted whit your link I've received two errors :
- SOKP and when I've flash it something like poped up : E:Cannot write to sd card clockworkmod recovery etc.
- CM 11 :
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
Click to expand...
Click to collapse
Like I said earlier, you should have flashing stock rom first to remove root via odin/hemidall.. you can find it at sammobile,com
then re-root with link i gave earlier again via odin/hemidall, and format in recovery like i said earlier. no wonder you still fail..
you should have philz touch recovery instead cwm if you succeed.

150208 said:
Like I said earlier, you should have flashing stock rom first to remove root via odin/hemidall.. you can find it at sammobile,com
then re-root with link i gave earlier again via odin/hemidall, and format in recovery like i said earlier. no wonder you still fail..
you should have philz touch recovery instead cwm if you succeed.
Click to expand...
Click to collapse
re-rooted as you said still the same loading screen , you can give me a link to the part of the forum where I can speak with developers as you said few comments ago

[Q] Unfortunately "<system app>" has stopped

Hi there, i am newbie here and this is my first post. So i'm not quite sure if im following all the forum rules properly or if im using the right terms to explain my issue. Please overlook the same and help me asap.
Im using a Canvas 2 a110, rooted,
I had installed some custom rom,
the name is like MMX_JB Stock rom or something,
i am not able to access my phone so i cant check either.
In the process of troubleshooting, i have now installed the Thunderzapv2 kernel
Please let me know if any more details are required.
The issue
Out of nowhere, my phone just popped up a message saying "Unfortunately, Launcher has stopped".
I did a reboot and it was still the same.
Now since the launcher isnt working, i cant get around the apps or do anything.
I try to open the Settings app from the notification panel, but then a msg saying "Unfortunately, Settings has stopped" pops up.
If there are new messages, i can open the Hideitpro app, but i cant click a single thing coz the Launcher error notification
keeps popping up. And i ve to press Ok and any app that is open closes.
So basically i cannot do anything but press the power button and switch off. And i have no idea how i messed up my system files.
I created a backup in CWM. Deleted all system and user data and flashed the same ROM again.
Then i could use the phone like new. But the issue is that i really need to get some of my messages and contacts back.
So i entered CWM again and chose Advanced Restore. Then selected Data from the options.
I only needed the data so thats all i restored. Did not restore system/cache/boot or any of that.
I reboot thinking all my data will be back with my system files back in place.
However, i get the same errors and issues again like before. So now i only have the option to either forget all data
and use the phone as new. Or keep the data when the system files are corrupted somehow.
Please let me know how i can restore my data and make my mob work properly again.
Thanks and Regards.

nyazmohsin said:
Hi there, i am newbie here and this is my first post. So i'm not quite sure if im following all the forum rules properly or if im using the right terms to explain my issue. Please overlook the same and help me asap.
Im using a Canvas 2 a110, rooted,
I had installed some custom rom,
the name is like MMX_JB Stock rom or something,
i am not able to access my phone so i cant check either.
In the process of troubleshooting, i have now installed the Thunderzapv2 kernel
Please let me know if any more details are required.
The issue
Out of nowhere, my phone just popped up a message saying "Unfortunately, Launcher has stopped".
I did a reboot and it was still the same.
Now since the launcher isnt working, i cant get around the apps or do anything.
I try to open the Settings app from the notification panel, but then a msg saying "Unfortunately, Settings has stopped" pops up.
If there are new messages, i can open the Hideitpro app, but i cant click a single thing coz the Launcher error notification
keeps popping up. And i ve to press Ok and any app that is open closes.
So basically i cannot do anything but press the power button and switch off. And i have no idea how i messed up my system files.
I created a backup in CWM. Deleted all system and user data and flashed the same ROM again.
Then i could use the phone like new. But the issue is that i really need to get some of my messages and contacts back.
So i entered CWM again and chose Advanced Restore. Then selected Data from the options.
I only needed the data so thats all i restored. Did not restore system/cache/boot or any of that.
I reboot thinking all my data will be back with my system files back in place.
However, i get the same errors and issues again like before. So now i only have the option to either forget all data
and use the phone as new. Or keep the data when the system files are corrupted somehow.
Please let me know how i can restore my data and make my mob work properly again.
Thanks and Regards.
Click to expand...
Click to collapse
Hi there,
Don't worry about it, it can be cured as before. Just answer my questions as accurately as you can:
1) How did you take the backup and how much was the backup file size?(complete step by step process that you followes and which ROM was installed in your phone when you were taking the backup? If possible, which kernel was installed at the time of taking backup?)
2) Which ROM you flashed again?
And how?
3) how you tried to restore the data back?
If you can give some more information which can help, please provide.
And, don't worry about it. Your phone will work as before :thumbup:
Hit thanks button only if this was helpfull in any way:thumbup:
Sent from my Micromax A110

Reply
@B#! said:
Hi there,
Don't worry about it, it can be cured as before. Just answer my questions as accurately as you can:
1) How did you take the backup and how much was the backup file size?(complete step by step process that you followes and which ROM was installed in your phone when you were taking the backup? If possible, which kernel was installed at the time of taking backup?)
2) Which ROM you flashed again?
And how?
3) how you tried to restore the data back?
If you can give some more information which can help, please provide.
And, don't worry about it. Your phone will work as before :thumbup:
Hit thanks button only if this was helpfull in any way:thumbup:
Sent from my Micromax A110
Click to expand...
Click to collapse
Hi there,
Currently i have installed the same old custom rom i used before and the phone is working.
But as mentioned before there seems to be no way to restore my data.
1. I created a backup after the phone system files got corrupted. Using CWM.
The backup i scurrently in my external storage card. Ext/clockworkmod- two folders (backup & blobs)
The total backup size is 1.09 gb.
The custom ROM (rooted) that i was using and have currently installed is Micromax_a110_jellybean_stock_cwm_paplu3
I have been using this rom for more than a year now.
Backed up data using the backup option in CWM recovery.
The kernel that i had at that time, i dont remember at all. It may have been something like 1.xxx. But im not sure.
The kernel i currently have is Thunderzap 2
2. The current ROM is the same. I just deleted all system and user data after taking backup and installed
the zip file using the "Install zip from sd card" option in CWM.
3. Tried to restore after flashing by going to CWM, selecting "Advanced Restore", and then "Data"

nyazmohsin said:
Hi there,
Currently i have installed the same old custom rom i used before and the phone is working.
But as mentioned before there seems to be no way to restore my data.
1. I created a backup after the phone system files got corrupted. Using CWM.
The backup i scurrently in my external storage card. Ext/clockworkmod- two folders (backup & blobs)
The total backup size is 1.09 gb.
The custom ROM (rooted) that i was using and have currently installed is Micromax_a110_jellybean_stock_cwm_paplu3
I have been using this rom for more than a year now.
Backed up data using the backup option in CWM recovery.
The kernel that i had at that time, i dont remember at all. It may have been something like 1.xxx. But im not sure.
The kernel i currently have is Thunderzap 2
2. The current ROM is the same. I just deleted all system and user data after taking backup and installed
the zip file using the "Install zip from sd card" option in CWM.
3. Tried to restore after flashing by going to CWM, selecting "Advanced Restore", and then "Data"
Click to expand...
Click to collapse
Hello nyazmohsin,
It seems now you got a solution and your phone is working fine. Good to hear this
I don't wish but if in case you face any problems in future, feel free to ask me:thumbup:
Sent from my Micromax A110

@B#! said:
Hello nyazmohsin,
It seems now you got a solution and your phone is working fine. Good to hear this
I don't wish but if in case you face any problems in future, feel free to ask me:thumbup:
Sent from my Micromax A110
Click to expand...
Click to collapse
Hey. NO! NO!
I have not found a fix. I could make my mob work by flashing even before. Thats not the problem.
Let me try to explain in brief.
My mob suddenly crashed all of a sudden. And i could not take a backup.
The only option i had was to flash. So i did that by taking a backup from CWM.
I flashed the mob and now its working. But i am not able to restore data that i backed up using CWM.

nyazmohsin said:
Hey. NO! NO!
I have not found a fix. I could make my mob work by flashing even before. Thats not the problem.
Let me try to explain in brief.
My mob suddenly crashed all of a sudden. And i could not take a backup.
The only option i had was to flash. So i did that by taking a backup from CWM.
I flashed the mob and now its working. But i am not able to restore data that i backed up using CWM.
Click to expand...
Click to collapse
Hi nyazmohsin,
You said your phone is working now so, i got confused.
If you still have the backup file in your phone, try doing this:
1) goto CWM --> backup and restore --> restore --> chose the backup file
--> restoration process will begin --> let it complete.
Note: Donot go for advanced restore
2) Now after the restore is complete --> wipe data/factory reset --> wipe cache partition --> advanced --> wipe dalvik cache --> reboot system
Try this and let me know if this worked.
:thumbup:
Sent from my Micromax A110

@B#! said:
Hi nyazmohsin,
You said your phone is working now so, i got confused.
If you still have the backup file in your phone, try doing this:
1) goto CWM --> backup and restore --> restore --> chose the backup file
--> restoration process will begin --> let it complete.
Note: Donot go for advanced restore
2) Now after the restore is complete --> wipe data/factory reset --> wipe cache partition --> advanced --> wipe dalvik cache --> reboot system
Try this and let me know if this worked.
:thumbup:
Sent from my Micromax A110
Click to expand...
Click to collapse
Did not work
Even if i restore data as said above, and then if i do a wipe data/factory rest, wont that remove the data i restored in step 1?
Just an amateur doubt.

nyazmohsin said:
Did not work
Even if i restore data as said above, and then if i do a wipe data/factory rest, wont that remove the data i restored in step 1?
Just an amateur doubt.
Click to expand...
Click to collapse
Hi,
Try these steps and check if the phone is working fine after the reboot.
If it's working fine : goto CWM again and restore the backed up file again > then this time don't wipe data/factory reset > just wipe dalvik cache from advanced.
Check this and let me know.
Sent from my Micromax A110

@B#! said:
Hi,
Try these steps and check if the phone is working fine after the reboot.
If it's working fine : goto CWM again and restore the backed up file again > then this time don't wipe data/factory reset > just wipe dalvik cache from advanced.
Check this and let me know.
Sent from my Micromax A110
Click to expand...
Click to collapse
Out of despair, after trying out the previous procedure I flashed the SUVI rom.
So should i do the above mentioned steps now?
Would it cause any issues since the backed up data is of the custom Jelly bean 4.2.1 rom and the current rom is SUVI?
I can flash the previous rom again and try this procedure if required.

nyazmohsin said:
Out of despair, after trying out the previous procedure I flashed the SUVI rom.
So should i do the above mentioned steps now?
Would it cause any issues since the backed up data is of the custom Jelly bean 4.2.1 rom and the current rom is SUVI?
I can flash the previous rom again and try this procedure if required.
Click to expand...
Click to collapse
Hi,
Dude you said u had mmx stock jellybean ROM which is supposed to be 4.1.1 and now you are saying it was 4.2.1. You are creating a huge confusion
However, if you want your data back, flash the stock jellybean 4.1.1 by paplu3. And, then follow all steps carefully as i mentioned.
It' all your wish, and if you don't want the data back you can continue using the SUVI ROM.:thumbup:
Note: Everytime if you'll keep on changing the ROM and kernel, none of my solutions will workout for you:thumbdown:
Sent from my Micromax A110

@B#! said:
Hi,
Dude you said u had mmx stock jellybean ROM which is supposed to be 4.1.1 and now you are saying it was 4.2.1. You are creating a huge confusion
However, if you want your data back, flash the stock jellybean 4.1.1 by paplu3. And, then follow all steps carefully as i mentioned.
It' all your wish, and if you don't want the data back you can continue using the SUVI ROM.:thumbup:
Note: Everytime if you'll keep on changing the ROM and kernel, none of my solutions will workout for you:thumbdown:
Sent from my Micromax A110
Click to expand...
Click to collapse
Tried doing the same from 4.1.1 rom but it did not work.
Switching back to SUVI. There seems to be no workaround
@B#!- Thanks a ton for your time and patience.
People like you hold the reputation of Android and open source operating systems.
Have a great day!

Same problem
Hii !! i have the same problem !! i fixed it after many flashing and wiping !! and i dont have the true solution !!