Help me, my DNA RUU power outages, lead to cell phones don't boot, the physical button failure, connected to a computer error
Qualcomm HS-USB QDLoader 9008(com10)，Is there any way to recover?：哭：
You could search in One X box, there is a topic guide to charge and restart phone to bootloader in case phone to be bricked and battery run out of power.
Sorry that I do not remember and provide ecxactly link, try search and hope it could hep.
Thanks!~
snipervn said:
You could search in One X box, there is a topic guide to charge and restart phone to bootloader in case phone to be bricked and battery run out of power.
Sorry that I do not remember and provide ecxactly link, try search and hope it could hep.
Click to expand...
Click to collapse
Thank you!~
Related
i have a htc droid incredible 4g. i was rooting it through this guide.
Team Infernal FakeCid AUTOMATIC bootloader unlock
i followed it step by step completing it until i reached to step to change the values with hex editor. i think i have changed the wrong values so when i came to end to enter " start a new one and type "adb reboot bootloader" " the phone restarted and wouldn't turn back on in no way. it wont vibrate, go to bootloader or the led wont come on when charging. i would like to bring it back to stock. i live in jamaica so i cannot carry it to htc. any advice would be greatly appreciated.
Did you make sure that your Battery has a charge. It is possible that if you started the process with less than a full battery, you may have completely discharged the battery. Plug the device in for a while. Then see if you can Boot it up. If you can Boot into Fastboot Recovery, and run the RUU. I take it that you are on Verizon ? That your device is the HTC Droid Incredible 4G LTE correct ? If so you can find the RUU to take it back to completely Stock in the link below.
As always read, read, and reread the thread / posts before doing anything.
Droid Incredible 4G LTE (Fireball) Stock ROMs
EDIT:
You may also want to check out the link below.
Droid Incredible 4G LTE Resource Index
i plugged the phone into the wall charger for about two hours and still nothing is happening
after checking on the pc again i saw this in devices and printers. Qualcomm HS-USB QDLoader 9008 (COM13). is there a possiblity that it can be unbricked?
realkilla99 said:
i plugged the phone into the wall charger for about two hours and still nothing is happening
Click to expand...
Click to collapse
realkilla99 said:
after checking on the pc again i saw this in devices and printers. Qualcomm HS-USB QDLoader 9008 (COM13). is there a possiblity that it can be unbricked?
Click to expand...
Click to collapse
What you are seeing on the PC / Laptop with the Device not connected are the drivers for when you connect your device. If you cannot get into Fastboot then it is most likely Bricked. I would suggest checking out THIS THREAD. Lastly you can try posting HERE in the Droid Incredible Q/A section to see if anyone can further assist you.
Hello,
I have a RIFF Box and an Adapter for sensation XE.
I tried to resurrect and rewrite all. I've tried once to do with s-off and once without. The flashing itself went straight, no log errors in riff.
However, the phone is still bricked upon assembling it. When I connect the phone to the PC via usb, it is still appearing as qhsusb_dload under device manager. (with riff driver it's named Qualcomm HS-USB QDLoader 9008 (COM16))
I've also tried this guide: http://forum.xda-developers.com/showthread.php?t=2775115 and everything went straight. The problem is, after I assembled the phone, it is not being charged or responding to entering hboot.
please help.
Click to expand...
Click to collapse
EDIT: I've tried few things, long story short: it was a hardware failure. I took my friend's old sensation xe which was bricked also and because his phone was in bad shape, I took only the motherboard, JTAGed it, and the magic happened. Everything works.
bump!
Romansko said:
bump!
Click to expand...
Click to collapse
try with a different battery if you have
or charge the device without battery,sim and sdcard for 4-5 hours
put them back and try to switch on the device
rzr86 said:
try with a different battery if you have
or charge the device without battery,sim and sdcard for 4-5 hours
put them back and try to switch on the device
Click to expand...
Click to collapse
Thanks for advise, I'll try to charge without a battery.
I will report.
EDIT: It didn't help kind sir. I don't have another battery though.
dead..
so I guess my device is dead.. probably some hardware fault?
Romansko said:
so I guess my device is dead.. probably some hardware fault?
Click to expand...
Click to collapse
probably yes
I am looking for somebody whose phone in Qualcomm HS-USB QDLoader 9008 mode. I want to try out something to unbrick nexus 5's stucked in Qualcomm HS-USB QDLoader 9008 mode.
Contact me on facebook or hangouts: [email protected]
I want you to allow me to connect to your pc through teamviewer.
bitdomo said:
I am looking for somebody whose phone in Qualcomm HS-USB QDLoader 9008 mode. I want to try out something to unbrick nexus 5's stucked in Qualcomm HS-USB QDLoader 9008 mode.
Contact me on facebook or hangouts: [email protected]
I want you to allow me to connect to your pc through teamviewer.
Click to expand...
Click to collapse
Can I just say that anything this guy does ^^^ is for the good of the community, so if you have one in this state, definitely contact @bitdomo
bitdomo said:
I am looking for somebody whose phone in Qualcomm HS-USB QDLoader 9008 mode. I want to try out something to unbrick nexus 5's stucked in Qualcomm HS-USB QDLoader 9008 mode.
Contact me on facebook or hangouts: [email protected]
I want you to allow me to connect to your pc through teamviewer.
Click to expand...
Click to collapse
So basically u r trying to unbrick a hardbricked phone...?thats seems interesting..
I will try my best to get u what u need...
doctor_droid said:
So basically u r trying to unbrick a hardbricked phone...?thats seems interesting..
I will try my best to get u what u need...
Click to expand...
Click to collapse
Come on..... Brick it! ?
Darth said:
Come on..... Brick it! ?de00
Click to expand...
Click to collapse
Lol.....when did i said i was rich ?
bitdomo said:
I am looking for somebody whose phone in Qualcomm HS-USB QDLoader 9008 mode. I want to try out something to unbrick nexus 5's stucked in Qualcomm HS-USB QDLoader 9008 mode.
Contact me on facebook or hangouts: [email protected]
I want you to allow me to connect to your pc through teamviewer.
Click to expand...
Click to collapse
well now i have if you want, i (dont ask me why) wrongly flashed lg g2´s rpm into my nexus 5 rpm partition, and now it only starts at that mode or some kind of download mode
(see http://forum.xda-developers.com/google-nexus-5/help/dead-nexus-5-t2954709)
Hey, I have a totally Hard-bricked nexus 5.
Still wondering how it got bricked although i was not flashing anything it was just sitting there.
Check my post: http://forum.xda-developers.com/google-nexus-5/help/android-lollipop-nexus-5-discovered-t2960372
he never contact me , the guys ho's saying that he can fix ours phone
sahouli31 said:
he never contact me , the guys ho's saying that he can fix ours phone
Click to expand...
Click to collapse
What guy?
Darth said:
What guy?
Click to expand...
Click to collapse
I'm guessing @bitdomo He hasn't posted on XDA since December 1st. Hoping he's just busy because I'd really like to see if he can fix the qhusb brick without a riff box.
theesotericone said:
I'm guessing @bitdomo He hasn't posted on XDA since December 1st. Hoping he's just busy because I'd really like to see if he can fix the qhusb brick without a riff box.
Click to expand...
Click to collapse
i flash it with a riff box , and the flash was succesful , but the phone won't boot up
He didn't say he could fix it.... He wanted a bricked device to test on. ?
And tis the season to be busy with real life.... He'll be back. ?
Just messaged him. Just thought i should post here to let others know.
"Hi i have a water damaged nexus 5 which can boot (but dead lcd and digitizer) and is fully functioning when normally turned on. (Can hear notifications, and is detected normally). However, when its at the bootloader its detected as Qualcomm HS-USB QDLoader 9008. (twrp was installed, but cant get into it).
I want to sell it for parts but I have no way of doing a factory reset to remove my data from it. How do i know my data is still on there? Because i was able to get into the storage and get my photos, music, etc from it when it booted normally (before digitizer died, after lcd died).
If i am of any help, just reply. If not, then im sorry."
Hopefully my "bricked?" nexus can help the community and myself cause currently its a brick.
alb3rtt said:
Just messaged him. Just thought i should post here to let others know.
"Hi i have a water damaged nexus 5 which can boot (but dead lcd and digitizer) and is fully functioning when normally turned on. (Can hear notifications, and is detected normally). However, when its at the bootloader its detected as Qualcomm HS-USB QDLoader 9008. (twrp was installed, but cant get into it).
I want to sell it for parts but I have no way of doing a factory reset to remove my data from it. How do i know my data is still on there? Because i was able to get into the storage and get my photos, music, etc from it when it booted normally (before digitizer died, after lcd died).
If i am of any help, just reply. If not, then im sorry."
Hopefully my "bricked?" nexus can help the community and myself cause currently its a brick.
Click to expand...
Click to collapse
Water damaged is different.. That's physical damage. Can't reverse that with software
rootSU said:
Water damaged is different.. That's physical damage. Can't reverse that with software
Click to expand...
Click to collapse
So.. my data is trapped on that nexus... and its of no use...
Just was wondering cause it had the Qualcomm HS-USB QDLoader 9008 issue.
Would you say it safe to sell that phone for parts even though it has personal contacts and my debit card on it? I think i had a pattern lock on it (but lets just say i didnt), would you think they would be able to access that data?
It depends how determined they are. Plus i doubt its worth anything due to the damage. I'd scrap it info were you.
rootSU said:
It depends how determined they are. Plus i doubt its worth anything due to the damage. I'd scrap it info were you.
Click to expand...
Click to collapse
Ill find a creative way of destroying it.. lmao
alb3rtt said:
Ill find a creative way of destroying it.. lmao
Click to expand...
Click to collapse
Haha
Got to be blender or acid, surely?
alb3rtt said:
Ill find a creative way of destroying it.. lmao
Click to expand...
Click to collapse
Microwave. ?
Um.... In the middle of an open field of course. Not in the kitchen. ?
BUMP!BUMP!BUMP!
I have something working. I can read and write partitions when phone is in qdloader 9008 mode, but before publishing I want to test it on some real hard bricked nexus to make it sure it works.
Edit: Tested. I bricked and unbricked my device a few times. I am making a thread about it in the General forum.
Hi there,
I accidentally flashed (inside twrp) my HTC m8 with a bootstack/modem of a different phone (39a,LG G2). I'm pretty embarrassed about it, didn't mean to do it...I thought I was following instructions to install a new rom for the m8,except I was in the wrong forum..
details: in TWRP I flashed the wrong file, then went on to install a new rom and an error appeared: this is not vs980, this device is m8wl...so I thought, what? strange....
I turned off the phone (without realizing yet what happened. Sorry, stressful couple of weeks) and when I tried to turn it back on, it wouldn't. No matter how long I held the power button, or power and vol down. It will not go in download mode, neither detect it is plugged in to charger or a computer. Basically totally off without any response.
My question: is there any way possible to resuscitate this phone? please help me! any advice is appreciated.
before I had the m8 with s-off,rooted,with a 5.1 rom installed.
Thank you in advance!!!
HTC m8
danielr324 said:
Hi there,
I accidentally flashed (inside twrp) my HTC m8 with a bootstack/modem of a different phone (39a,LG G2). I'm pretty embarrassed about it, didn't mean to do it...I thought I was following instructions to install a new rom for the m8,except I was in the wrong forum..
details: in TWRP I flashed the wrong file, then went on to install a new rom and an error appeared: this is not vs980, this device is m8wl...so I thought, what? strange....
I turned off the phone (without realizing yet what happened. Sorry, stressful couple of weeks) and when I tried to turn it back on, it wouldn't. No matter how long I held the power button, or power and vol down. It will not go in download mode, neither detect it is plugged in to charger or a computer. Basically totally off without any response.
My question: is there any way possible to resuscitate this phone? please help me! any advice is appreciated.
before I had the m8 with s-off,rooted,with a 5.1 rom installed.
Thank you in advance!!!
Click to expand...
Click to collapse
You need all in one kit 2.0
M8 firmwareTWRP or probably RUU file
my choice will be firmware TWRP
you can flash it with help of All in one tool kit 2.0
ok_then_so said:
You need all in one kit 2.0
M8 firmwareTWRP or probably RUU file
my choice will be firmware TWRP
you can flash it with help of All in one tool kit 2.0
Click to expand...
Click to collapse
No, a toolkit won't help. He needs a new phone.
Sent from my HTC6535LVW using Tapatalk
beaups said:
No, a toolkit won't help. He needs a new phone.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
thanks for the help so far guys!
Here's another funny thing. After a few attempts of plugging it in to a computer, it was recognized and it showed up in the device manager. The phones still did not turn on though. Additionally it seems that the phone is seen as an LG model (even though it's not), but I am not sure yet. I will get the HTC drivers installed,and if it doesn't work, I will try the LG drivers.
by the way, isn't there a way to flash the correct modem/bootstack with ones of those kits? i also remember from downloading the wrong LG G2 modem/bootstack that it didn't come with fastboot in it.
I will try a few things and report it back.
thanks again,
danielr324 said:
thanks for the help so far guys!
Here's another funny thing. After a few attempts of plugging it in to a computer, it was recognized and it showed up in the device manager. The phones still did not turn on though. Additionally it seems that the phone is seen as an LG model (even though it's not), but I am not sure yet. I will get the HTC drivers installed,and if it doesn't work, I will try the LG drivers.
by the way, isn't there a way to flash the correct modem/bootstack with ones of those kits? i also remember from downloading the wrong LG G2 modem/bootstack that it didn't come with fastboot in it.
I will try a few things and report it back.
thanks again,
Click to expand...
Click to collapse
If your device doesn't light the power button but for a single flash when you try to power it on your board is toast.
If it shows up in device manager as a qusb bulk device the board is toast.
Sent from my HTC6535LVW using Tapatalk
dottat said:
If your device doesn't light the power button but for a single flash when you try to power it on your board is toast.
If it shows up in device manager as a qusb bulk device the board is toast.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
I got it to be recognized on a computer again, and windows installs a driver. The name of the device is forge hs-usb qdloader 9008.
I tried the all in one 2.0 kit, adb sideload, etc but anything I try I get a "device not found".
I think I am giving up unless someone finds a way to unbrick this kind of severe problem in the future. I also researched a bit on google, and there's a way to unbrick the LG G2 when it's seen as forge hs-usb qdloader 9008, which is known as a board unbrick. I found nothing for the HTC m8 though.
We tried all we could Thanks all for the help, it's very much appreciated! You guys are the best and this forum is awesome. I also ordered a new phone...and I will root it too
dottat said:
If your device doesn't light the power button but for a single flash when you try to power it on your board is toast.
If it shows up in device manager as a qusb bulk device the board is toast.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
Might be completely wrong on this.
Wouldn't he be able to JTAG the appropriate boot image back onto the device?
Also, I know we had a hard brick recovery for the S3 back in the day. Worked consistently on full hard brick's.
http://forum.xda-developers.com/showthread.php?t=2581166
Isn't it possible to dump a debrick image from a working device and follow the guide with that? I know the two devices are completely different, but the premise is the same.
My technical know-how isn't anywhere near your level, just thought I'd throw these ideas out there is case it hasn't been thought of yet. I'd be happy to put together a guide on how to do this if it can work on the M8.
BadUsername said:
Might be completely wrong on this.
Wouldn't he be able to JTAG the appropriate boot image back onto the device?
Also, I know we had a hard brick recovery for the S3 back in the day. Worked consistently on full hard brick's.
http://forum.xda-developers.com/showthread.php?t=2581166
Isn't it possible to dump a debrick image from a working device and follow the guide with that? I know the two devices are completely different, but the premise is the same.
My technical know-how isn't anywhere near your level, just thought I'd throw these ideas out there is case it hasn't been thought of yet. I'd be happy to put together a guide on how to do this if it can work on the M8.
Click to expand...
Click to collapse
Not likely with the nand used on this device.
Sent from my HTC6535LVW using Tapatalk
I Just attempted a root on my xt1060 vzn moto x and i think i hard bricked it. I was supposed to update the Qhsusb_dload drivers on my windows 7 yet i didn't find them. At this point my device was turned off an i had no way of getting it back on, no fastboot or anything. The green led light will light up when its plugged in and i hold the power button for a while. When i plug the usb and phone into the pc it will briefly show up as Qhsusb_driver in the device manager then switch to Relink HS USB QDloader 900. If there is any hope for my device and someone could share it that would be greatly appreciated. If someone could post a solution you are a lifesaver.
Maxim b said:
I Just attempted a root on my xt1060 vzn moto x and i think i hard bricked it. I was supposed to update the Qhsusb_dload drivers on my windows 7 yet i didn't find them. At this point my device was turned off an i had no way of getting it back on, no fastboot or anything. The green led light will light up when its plugged in and i hold the power button for a while. When i plug the usb and phone into the pc it will briefly show up as Qhsusb_driver in the device manager then switch to Relink HS USB QDloader 900. If there is any hope for my device and someone could share it that would be greatly appreciated. If someone could post a solution you are a lifesaver.
Click to expand...
Click to collapse
Hello,
You may try posting your query here Moto X Verizon Topics and Discussion forum, the experts there maybe able to assist you.
-Vatsal
Vatsal said:
Hello,
You may try posting your query here Moto X Verizon Topics and Discussion forum, the experts there maybe able to assist you.
-Vatsal
Click to expand...
Click to collapse
Thanks!