Database Info

[CWM] Recovery For Micromax A35 Bolt

Hoooray!!! We got you root method, now we bring you ClockworkMod Recovery to your A35 Bolt!!!
This is just a quick guide for experienced users, you can find the detailed guide here : [CWM] for Micromax A35
CWM recovery courtesy of our group member : Vibhav Jha
Catch up with latest discussions on the awesome FB group : Micromax A35 Bolt group on Facebook
Downloads :
CWM Recovery
Procedure:
-- Copy the downloaded recovery.img to your ADB folder
-- Turn off your phone
-- Boot into fastboot mode by pressing power button and volume down keys together for sometime.
-- After sometime when it gets stuck at the logo, connect your phone to PC using USB cable
-- If you are in WinXP, open command prompt and browse to your ADB folder using cd commands.
If you are in Windows7, right click in the ADB folder and click to open command prompt there.
-- Type this in the command prompt :
Code:
fastboot devices
This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
-- Type this command to flash CWM recovery to your phone
Code:
fastboot flash recovery recovery.img
It will show the progress and completion dialogue within seconds when it finishes successfully. Now you can try if CWM is working.
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key to boot into recovery mode.
-- You should see CWM now, otherwise try flashing again
Thats it!! Congrats

jyothisthaliath said:
Hoooray!!! We got you root method, now we bring you ClockworkMod Recovery to your A35 Bolt!!!
This is just a quick guide for experienced users, you can find the detailed guide here : [CWM] for Micromax A35
CWM recovery courtesy of our group member : Vibhav Jha
Catch up with latest discussions on the awesome FB group : Micromax A35 Bolt group on Facebook
Downloads :
CWM Recovery
Procedure:
-- Copy the downloaded recovery.img to your ADB folder
-- Turn off your phone
-- Boot into fastboot mode by pressing power button and volume down keys together for sometime.
-- After sometime when it gets stuck at the logo, connect your phone to PC using USB cable
-- If you are in WinXP, open command prompt and browse to your ADB folder using cd commands.
If you are in Windows7, right click in the ADB folder and click to open command prompt there.
-- Type this in the command prompt :
Code:
fastboot devices
This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
-- Type this command to flash CWM recovery to your phone
Code:
fastboot flash recovery recovery.img
It will show the progress and completion dialogue within seconds when it finishes successfully. Now you can try if CWM is working.
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key to boot into recovery mode.
-- You should see CWM now, otherwise try flashing again
Thats it!! Congrats
Click to expand...
Click to collapse
coolll work buddy thnx a lot

Thanks, but I am not able to Use the root tool by binary, The phone seems to having problem connecting
Installed Universal ADB Drivers/PDA Net still binary tool gets stuck.
Have rooted many device earlier but this A35 Aka BOLT is a tough cookie
It can with Android 2.3.5 and manufacture/import date is march-2013 is is locked somehow ???

jyothisthaliath said:
Hoooray!!! We got you root method, now we bring you ClockworkMod Recovery to your A35 Bolt!!!
This is just a quick guide for experienced users, you can find the detailed guide here : [CWM] for Micromax A35
CWM recovery courtesy of our group member : Vibhav Jha
Catch up with latest discussions on the awesome FB group : Micromax A35 Bolt group on Facebook
Downloads :
CWM Recovery
Procedure:
-- Copy the downloaded recovery.img to your ADB folder
-- Turn off your phone
-- Boot into fastboot mode by pressing power button and volume down keys together for sometime.
-- After sometime when it gets stuck at the logo, connect your phone to PC using USB cable
-- If you are in WinXP, open command prompt and browse to your ADB folder using cd commands.
If you are in Windows7, right click in the ADB folder and click to open command prompt there.
-- Type this in the command prompt :
Code:
fastboot devices
This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
-- Type this command to flash CWM recovery to your phone
Code:
fastboot flash recovery recovery.img
It will show the progress and completion dialogue within seconds when it finishes successfully. Now you can try if CWM is working.
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key to boot into recovery mode.
-- You should see CWM now, otherwise try flashing again
Thats it!! Congrats
Click to expand...
Click to collapse
Rooted the phone
Using this recovery link, it doesn't appears to be a CWM recovery, it has all test options and is not cwm recovery.
can someone post the working recovery for Micromax BOLT.

not able to install recovery after rooting
jyothisthaliath said:
Hoooray!!! We got you root method, now we bring you ClockworkMod Recovery to your A35 Bolt!!!
This is just a quick guide for experienced users, you can find the detailed guide here : [CWM] for Micromax A35
CWM recovery courtesy of our group member : Vibhav Jha
Catch up with latest discussions on the awesome FB group : Micromax A35 Bolt group on Facebook
Downloads :
CWM Recovery
Procedure:
-- Copy the downloaded recovery.img to your ADB folder
-- Turn off your phone
-- Boot into fastboot mode by pressing power button and volume down keys together for sometime.
-- After sometime when it gets stuck at the logo, connect your phone to PC using USB cable
-- If you are in WinXP, open command prompt and browse to your ADB folder using cd commands.
If you are in Windows7, right click in the ADB folder and click to open command prompt there.
-- Type this in the command prompt :
Code:
fastboot devices
This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
-- Type this command to flash CWM recovery to your phone
Code:
fastboot flash recovery recovery.img
It will show the progress and completion dialogue within seconds when it finishes successfully. Now you can try if CWM is working.
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key to boot into recovery mode.
-- You should see CWM now, otherwise try flashing again
Thats it!! Congrats
Click to expand...
Click to collapse
Hello jyothisthaliath, I have rooted my a35 but I am not able to install recovery. Fastboot method is running successfully but when I check the phone while holding vol+ and power button, it shows stock recovery.. I am attaching the fastboot image..
can you help me out..........

How do u guys created it plz let me know I wanna create a cwm recovery for micromax a 30 (smarty 3.0)

hi all devs working for the development of a35....
Can any one provide me stockboot.img
Bcoz i hav made a custom s4 rom for a35 but it is not booting
So if any one can provide the boot.img we can get a custom rom

jyothisthaliath said:
Hoooray!!! We got you root method, now we bring you ClockworkMod Recovery to your A35 Bolt!!!
This is just a quick guide for experienced users, you can find the detailed guide here : [CWM] for Micromax A35
CWM recovery courtesy of our group member : Vibhav Jha
Catch up with latest discussions on the awesome FB group : Micromax A35 Bolt group on Facebook
Downloads :
CWM Recovery
Procedure:
-- Copy the downloaded recovery.img to your ADB folder
-- Turn off your phone
-- Boot into fastboot mode by pressing power button and volume down keys together for sometime.
-- After sometime when it gets stuck at the logo, connect your phone to PC using USB cable
-- If you are in WinXP, open command prompt and browse to your ADB folder using cd commands.
If you are in Windows7, right click in the ADB folder and click to open command prompt there.
-- Type this in the command prompt :
Code:
fastboot devices
This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
-- Type this command to flash CWM recovery to your phone
Code:
fastboot flash recovery recovery.img
It will show the progress and completion dialogue within seconds when it finishes successfully. Now you can try if CWM is working.
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key to boot into recovery mode.
-- You should see CWM now, otherwise try flashing again
Thats it!! Congrats
Click to expand...
Click to collapse
Hi,,
Does this recovery would also work for Bolt A40 .. ??
Thanks in advance.!

@jyothisthaliath iam looking forward to rooting my a35 bolt ... but i'd found that there is no thread for a35 and no roms... for the phone ....... KINDLY can You please help me in finding things for a35.......

Recovery for micromax a37
Hello everyone can any one help me.?
i want recovery for my micromax a37

babadepa said:
Hello jyothisthaliath, I have rooted my a35 but I am not able to install recovery. Fastboot method is running successfully but when I check the phone while holding vol+ and power button, it shows stock recovery.. I am attaching the fastboot image..
can you help me out..........
Click to expand...
Click to collapse
Same problem bro plz help me

[Q] How to Unlock bootloader in Funbook P310?

I have CWM Installed and also rooted my phone Micromax Funbook P310. To boot my phone into recovery, i press power button and volume up. It shows up a menu containing Fastboot mode ,Recovery mode and Normal mode. when i select fastboot the micromax logo comes and hangs . In recovery mode it goes CWM Recovery and normal mode it reboots. I tried Fastboot in computer and it didnt help. Quick boot also didnt work. Plzz Help

Bharathjo said:
I have CWM Installed and also rooted my phone Micromax Funbook P310. To boot my phone into recovery, i press power button and volume up. It shows up a menu containing Fastboot mode ,Recovery mode and Normal mode. when i select fastboot the micromax logo comes and hangs . In recovery mode it goes CWM Recovery and normal mode it reboots. I tried Fastboot in computer and it didnt help. Quick boot also didnt work. Plzz Help
Click to expand...
Click to collapse
How can you flash custom recovery without unlocking your bootloader?
May be it's already unlocked. In the adb mode type
Adb reboot bootloader

I used MTK Droid tools to Install CWM Recovery. I Didn't use Rom Manager. If I use adb reboot bootloader from my pc in fastboot terminal it can find my device but if I use that command it simply reboots the phone I have tried it several times it doesn't work. Plzz help!!
Sent from my GT-I9192 using XDA mobile app

{Recovery}(Boot with hardKeys fix)Boot into CWM recovery with hardkeys Micromax a27

Recovery Tutorial(How to Boot into recovery With Hardkeys)
Tutorial
Boot into recovery with hard keys
First start ur phone in fastboot mode and
connect it with pc via usb cable
and download the Mmx a27 tools.rar link
below
then follow this Tutorial
Step2- open adb folder in pc put Recovery.img
and Boot.img there
Step3- press and hold shift and open command
prop
Step4- type
fastboot devices
next
fastboot flash recovery boot.img
next
fastboot flash boot recovery.img
next
disconnect your phone
remove battry
reinsert
now switch on
you will see recovery
Now in recovery go to advance ===> Then
Reboot Recovery ===> Ur phone will Start
normally
Note:- When u will Turn on ur phone ur phone
will boot into Cwm and u need to Follow same
procedure again
==> In recovery go to Advance ===> Then Reboot
recovery
i have used this procedure with stock rom only
(dont know about the custom rom will it work
or not)
cheers now u will able to boot into recovery
with hard key(use power key only)
linkFile attached Below
mmx a27 tools.............
this package contain :- Adb
Fastboot
Recovery.img
Boot.img
This is all u need this all is in only 7 mb
Bugs In above Recovery Tutorial:-
Offline charging is not working
If u give restart command by any application ur device will not restart it will turn on with cwm again u need to go to advance >> reboot recovery
link to Mmx tool :- http://forum.xda-developers.com/attachment.php?attachmentid=3245674&d=1428206317

QMobile Noir E2 Root Method (No Bootloader Unlock Method Added)

Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
fastboot reboot
Click to expand...
Click to collapse
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!ewVSyI7B!xAvgnzYORGFCtXLyxerNt9hx8Awz-5hNO2vlz5uabfo
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.

Reserved
1) SDCard works fine with recovery
2) Found identical device . Panasonic Eluga A3
3) Will test Recovery of Eluga A3 soon :fingers-crossed:

i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"

bluedrago said:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
Click to expand...
Click to collapse
The Stock System of Noir E2 is Encrypted ..... all nougat based systems are encrypted
You need to backup all data in internal storage to your pc and go to TWRP and Go to Wipe and CLICK ON FORMAT DATA BUTTON
that will remove encryption and allow you to flash zip files

Do you have any custom rom for qmobile e2 like Cm14 rom or miui rom or any other
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.

Aqdas Iftikhar said:
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Click to expand...
Click to collapse
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply

Yes I Want Bro. Also share the method to port/Flash it. And have u tested it.
andromodgod said:
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Click to expand...
Click to collapse
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.

Aqdas Iftikhar said:
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Click to expand...
Click to collapse
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.

I got an error in sp flash tool and also Non removable battery problem
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.

Aqdas Iftikhar said:
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Click to expand...
Click to collapse
Download Latest Version of SP Flash tool from http://spflashtool.com
Then extract the Downloaded OS into a separate folder on your desktop.
Then open SPFlash tools and Switch off your device ...
Load the scatter file on to SPFlash tolls that you extracted ... It will be in the OS folder with all the .img files.
Press the start button.
Then connect your device to the PC ... Remember device must be switched off properly.
Flashing should begin automatically.

Many Thanks bro I have flashed the ROM successfully
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.

Aqdas Iftikhar said:
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Click to expand...
Click to collapse
i forgot ... the link that i shared had the lastest update already .

I tried to root my device and in fast boot i encountered a problem
andromodgod said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Click to expand...
Click to collapse
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom

Aqdas Iftikhar said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Press enter
then type
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Click to expand...
Click to collapse
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though ??

andromodgod said:
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though
Click to expand...
Click to collapse
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:

Aqdas Iftikhar said:
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Click to expand...
Click to collapse
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.

I have rooted my device but cannot boot into system twrp opens again and again.
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro after rooting my device i restarted my device but twrp recovery boots again and again and not boot the system.
in twrp i selected to reboot to system but it open twrp recovery again.
i wipe the data and cache but still twrp is openeing.
plzz help me i even cannot acces my device in this situation.
Reply fast.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro tell me can i relock bootloader and remove or unflash twrp recovery after gaining root access.
if yes tell me how i can remove twrp recovery becasue it is irritating.
Plzz help me out.

When I click Mount/System it returns back to first option (Reboot) with a blink.
I am following first method.
Please help me.
PLzzzzzzzzzzzzzzz

PLz update the link of magisk zip file
The current link is not working. So plz update the link of magisk zip file.

FIXED: Mount Internal Storage in TWRP (Q Mobile Noir E2)
To mount internal storage in TWRP Recovery, Click on Wipe > Format Data > Type "yes" and Click on Ok. Then Reboot into Recovery. Now your Internal Storage is Mounted in TWRP. But it will format whole internal storage and factory reset rom so make a backup before doing this.

[twrp][recovery][root][hs3]micromax infinity pro hs3 twrp recovery and root

Hello Guys
this is my first threads
my english is not good so if you have any questions pls ask in hindi if possible
here i present TWRP RECOVERY FOR MICROMAX INFINITY PRO HS3
STEPS TO FLASH
1- UNLOCK BOOT LOADER
POWER OFF THE PHONE
BATTERY AT LEAST 60%
PRESS AND HOLD POWER KEY AND VOLUME UP
IT ASK YOU ---VOLUME UP-RECOVERY
VOLUME DOWN-FASTBOOT
PRESS VOLUME DOWN AND ITS BOOT INTO FASTBOOT MODE THEN
OPEN ADB AND FASTBOOT FOLDER
ON KEYBOARD PRESS SHIFT AND MOUSE RIGHT CLICK TOGETHER
NOW GO TO OPEN COMMAND WINDOW HERE OPTION
fastboot flashing unlock
or
fastboot oem unlock-go{UNLOCKING BOOTLOADER YOU LOST YOUR HOLE DATA SO FIRST BACKUP YOUR DATA}
2- AFTER UNLOCK ITS TAKE 5-10 MIN TO BOOT {ALERT----XDA AND IM NOT RESPONCIBLE FOR ANY KIND OF DAMAGE YOUR DEVICE SO BE CARE AND BACKUP YOUR DATA}
3-FLASH RECOVERY
fastboot flash recovery recovery.img
4-THEN REBOOT
fastboot reboot
*******WHEN YOU FLASH RECOVERY AND REBOOT WITH CMD {fastboot reboot} ENTER THEN PRESS VOLUME TO GO TWRP AND IN TWRP PRESS REBOOT***********
DOWNLOAD LINK
FASTBOOT FOLDER
[url]http://www.mediafire.com/file/gdd94yv78wen99m/fastboot_folder.zip[/URL]
HS3 RECOVERY
http://www.mediafire.com/file/bfx3cu8un6h9fkl/hs3recovery.img
SUPER SU
http://www.mediafire.com/file/n8uw77pm0v4ru8x/SuperSU-v2.82-201705271822.zip
SUPER SU FLASHING
COPY SUPER SU ZIP IN YOUR INTERNAL STORAGE
SWITCH OFF HS3 AND REBOOT IN RECOVERY WITH VOLUME UP
TAP INSTALL
AND ISNTALL SUPER SU
:victory::victory::victory:ROOT:victory::victory:
vedio link
MOD Edit -Links Removed

recovery not working...could you mail at [email protected]

i want to install oreo updates in micromax infinity but i didn't get rom
can i install rom of anyother android in my phone
please reply me ........

neeraj sharma.... said:
i want to install oreo updates in micromax infinity but i didn't get rom
can i install rom of anyother android in my phone
please reply me ........
Click to expand...
Click to collapse
sorry for late reply
dont try anyother rom untill it ported for this device

Thanks
Thanks

Will this work on any phone?