Related
Hi all,
I am generally not a XDA active reply user. I worked on a lot of Android fixing project. And here is one of mine result.
Please read the whole thread before working on it.
I know everyone is frustrating in upgrading to 4.4.2 but brick during odin process (ext4 fail) and stuck in 4.4.2 bootloader.
PS: This method is currently work on HK note3, but i think this method would work on all note3, Please try this will your own risk, I would not be responsible to all trouble according to this method. Varied N9005 would require different N9005 4.3 Firmware, I personally use HK Firmware because Mine is 16gb Note 3.
Here is the method to solve this problem:
Before working on it, we have to prepare the following things:
1. Odin 3.07 (Yes, 3.09 does not work)
2. HK firmware odin pack (Pit, BL (DO NOT WORK WITH IT, AP, CP, CSC) (Sorry for it is a Chinese link)
OR Workable N9005 4.3 firmware
3. 4.4.2 leaked firmware
4. 4.4.2 rom (I used sweet rom v.7 to fix it)
5. 4.4.2 recovery cwm @Chenglu
5. Samsung driver (bullshxt)
Now lets get started:
1. Flash the 4.4.2 firmware BL by odin.
2. Flash the HK Firmware AP, CP &CSC (Do not use the HK firmware BL)
3. once it done, turn to Download mode again and flash 4.4.2 recovery cwm by odin
4. Run Recovery
5. Wipe everything
6. Flash 4.4.2 rom ( I flashed sweet rom v7 currently)
7. Boot to system and do all the setting ( The sound and the signal are not working)
8. Boot back to download mode
9. Boot the 4.4.2 leaked firmware's CP ( DO NOT WIPE AFTERWARD)
10. Prepare coffee and cookies
11. Enjoy your device!
karnavont said:
Hi all,
...
Click to expand...
Click to collapse
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
xclub_101 said:
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
Click to expand...
Click to collapse
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
xclub_101 said:
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
Click to expand...
Click to collapse
Okay, i changed it, in term of a reference instead
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
maumarti2k said:
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
Click to expand...
Click to collapse
What version of Odin did you used? For the past 24 hours is it stable and any FC's? Are all apps working? I wanna try your guide. Having problem on the O.P. guides.
I am in the exact same situation, all over methods have failed, im going to try this!
3. 4.4.2 leaked firmware is a dead link!
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
jetbruceli said:
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
Click to expand...
Click to collapse
Seems I have had some success. Although, I found a couple of the instructions difficult to understand. Thanks for posting this, as I no longer have a brick.
Cheers.
filchi756 said:
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
Click to expand...
Click to collapse
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Samsung Note 3 Region Taiwan Softbrick UDC START
AldrichDSaints said:
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Samsung Note 3 Region Taiwan Softbrick UDC START
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
budi_west said:
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Click to expand...
Click to collapse
i also have the same problem. what should i do
Samsung note 3 Region Taiwan UDC START
sagsans said:
i also have the same problem. what should i do
Click to expand...
Click to collapse
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
budi_west said:
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
Click to expand...
Click to collapse
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Samsung Note 3 Taiwan UDC START
sagsans said:
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Click to expand...
Click to collapse
How do you flash the SweetROM what version? have you try locky guide?
Technology: The Ultimate Guide To Unbrick 16 Gb International Samsung Galaxy Note 3
http://forum.xda-developers.com/showthread.php?t=2627291
by: Locky Loki
Try this something else out
[ROM]N9005ZHUENB1 Android 4.4.2 Kitkat
http://forum.xda-developers.com/showthread.php?t=2636699
Or
[SOLUTION] Successful flash of leaked NA6 ROM on Hong Kong 32g N9005
http://forum.xda-developers.com/showthread.php?t=2613374
Actually i have started a question [Q] about Note 3 Taiwan UDC START at this forum but with no reply
[Q] Samsung Galaxy Note 3 SM-N9005 Region Taiwan Softbrick UDC START
http://forum.xda-developers.com/showthread.php?p=50061661
Lately i found out somebody posting That he is from Region taiwan anda he is able to flash firmware from region Hongkong and Taiwan Only..
So, i suppose Taiwan Region can seek help from Hongkong Region
Hi all, got an update this morning for the baltic variant of kit kat.
27mb
Sent from my SM-N9005 using XDA Premium 4 mobile app
Details from my Note 3
Sent from my SM-N9005 using XDA Premium 4 mobile app
Downloading...
Off the 3 official kitkat 4.4.2 roms I have tested, Switzerland & Poland & Baltic, I find the Baltic one the best.
At least I get to use kitkat before the BTU variant is released,as long as I use the official sam-mobile firmware, basically I can test the different country variants of the new kitkat 4.4.2 without fear of tripping knox, and I still get the OTA updates.
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Before update...
After update...
But here you don't see the CSC.You must install phone info and there you can see what country you have.
orly_mihai said:
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Click to expand...
Click to collapse
Hi orly.
Didn't see that, weird? why would an update change the CSC back to Poland, my CSC also shows N9005OXXENB1 and kies still says its an official version?
So to try to understand process I did a wipe cache and wipe data in recovery and it still shows N9005OXXENB1, so I re flashed Baltic ROM again and it now shows CSC N9005OXXENA5, now when I plug my note 3 into kies it says it wants to change it back
Just realised that the CSC has changed but both were the same XEO!
See screen dump.
Yes it's like mine.But the problem is that i have the Baltic CSC and now i have the Polonian CSC. Only with OTA update.
orly_mihai said:
But here you don't see the CSC.You must install phone info and there you can see what country you have.
Click to expand...
Click to collapse
To see CSC put in *#1234# in phone dialer
I will flash the Switzerland ROM again after tea and report back, I am guessing that the first kitkat ROM you flash is the CSC you get stuck with unless you root, and the CSC variations are only small software programs that are country specific like the Switzerland ROM. As I flashed the first official Poland ROM I am stuck with XEO.
The core features like like say having 4G in settings are ROM specific not the CSC files, which is why I swapped between all the 3 kitkat versions I have tested..
My first rom was a baltic 4.3 with that one i bought the Phone.First time i have Baltic CSC then uk CSC after flash i made a full wipe and then Netherland CSC. I verify in kies3.
Phew..
So I flashed the Switzerland ROM again and my CSC is now N9005PHNENA2, I tried hard reset from menu and hasen't changed, plugged into pc for kies and says its latest? So I was wrong you can change the CSC it appears?
Which is great as I am waiting for the BTU variant this month hopefully.
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
orly_mihai said:
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
Click to expand...
Click to collapse
Hi orly.
No my Knox fine, as long as I use official 4.4.2 ROM's. Now on latest Poland ROM.
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
SPYRO80 said:
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
Click to expand...
Click to collapse
I have never been rooted on my Note 3, and I only flashed official firmware from samfirmare.com, not posted ones on XDA just in case, I use odin 3.09
You can see from my previous screen dumps while I flashed different variants this week, and I include a screen shot from my note 3 as of today with the latest Poland ROM.
I've flashed Official Poland 4.4.2 Feb 2014 too... just curious can you install an application from APK files ? I seems having problems not able to do it short while after Factory Reset... already enable in setting thou but still the Install bar can't be click...
? SM-N9005 @ Tapatalk ?
Yes you can.But first you must enable from settings unknown sources.Everything it's ok no wifi drop or something else sayed somebody.
New Poland ROM has same problems for me as first Poland release, i.e.. screen off f-ups and wake lock problems, phone does random lock ups when switching screen back on, and no buttons seem work for a few seconds and screen blank, capacitive buttons sometimes light up? I had to hold power button down for 10 seconds once to get a re boot!
So I am flashing back to the Baltic ROM again.
The problem I'm running into is that there is no stock firmware for the United States that I can find anywhere for me to unroot my Gear 2 ending in "NE5". Samsung-updates is the same way. No USA firmware. There has to be something I can do.
kouichi74 said:
The problem I'm running into is that there is no stock firmware for the United States that I can find anywhere for me to unroot my Gear 2 ending in "NE5". Samsung-updates is the same way. No USA firmware. There has to be something I can do.
Click to expand...
Click to collapse
Go to http://www.sammobile.com/ create an account go to firmware put in your model and download the firmware then unzip and flash using Odin
kouichi74 said:
The problem I'm running into is that there is no stock firmware for the United States that I can find anywhere for me to unroot my Gear 2 ending in "NE5". Samsung-updates is the same way. No USA firmware. There has to be something I can do.
Click to expand...
Click to collapse
the thing with firmware for these devices, they dont carry a gsm/cdma chip, so it doesnt matter what firmware you use, juas as long its in the desired language you use nativly, any english speaking country will work , uk, australia, new zealand, canada, take your pic, but saying that any ota updates would be placed in sammobile anyway after a day or two, so its pretty pointless really to sacrifice root for ota when u can flash it manually via odin
Dambuzbee said:
Go to http://www.sammobile.com/ create an account go to firmware put in your model and download the firmware then unzip and flash using Odin
Click to expand...
Click to collapse
Hes tried that, there is none, only for certain territories of the usa, i think its some northern, or similar
rm
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
ok
sinbrad said:
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
Click to expand...
Click to collapse
Is your phone international unlocked out of the box? I dont believe it was, because as far as I've read international unlocked phones come with "unbranded" firmware. The unlocked ones I know can be pretty much flashed with "any" international firmware, which is what you are trying to do.
If you dont know for sure. Odin the stock German Vodaphone. Let the phone boot. Boot back to stock recovery, then factory reset and clear cache.
Then let the phone boot...Download phone info app by vndnguyen (free version is fine)...Open the app, go to CSC Code tab. Then that will tell you the active CSC code and your firmware CSC code...you are looking for the line that says Available CSC Codes. If it only lists German Vodaphone (VD2), then I believe you are stuck til the phone is unlocked.
Anyone, jump in here if I'm mistaken. I am using this as reference as, I've checked my G920F. Mine is unlocked tho and I can flash any firmware from any region with no problem. Hopefully I've answered your question.
I had no luck with the firmwares on the firmware page either.
If you are on OI9 check http://forum.xda-developers.com/galaxy-s6/general/guide-android-6-0-marshmallow-beta-how-t3277533
And try flashing the first stock firmware https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list (not the android M one!) via ODIN.
Basic process is:
Download the above file, extract, there should be 4 files inside (AP,BL,CP,CSC), simply select each one to go in the relevant box on ODIN, then go into download mode on your phone and click start...
N.B. Be aware that the above firmware contains a PIT file which will reformat and resize the partitions on your phone, so make sure you have a copy of the stock firmware that works before trying the flash (i.e. the one which Smart Switch downloads). You can grab it from your windows %TEMP% directory during the smart switch download (it first downloads a file to TMPxxx, then extracts it into a directory of the same name, its these files you want. They should be the four files beginning with the type of ODIN file you are flashing (AP,BL,CP,CSC). The files get deleted after the firmware has flashed so make sure you watch the process. If things go wrong you can re-flash these files via ODIN
As far as I was led to believe and when I purchased the phone it did state factory unlocked. I was able to put in any sim when I received it and didn't have to go through any aftermarket unlock process?
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
So, seems this is not uncommon?
ok the way to do it is download this file
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
its BTU firmware of 5.1.1
and flash this firmware you'll have 4 files AP,BL,CP,CSC,put it in the respective boxes in odin.I have tested this right now and it works
Press "thanks" if i have helped
Well downloaded the app for CSC info and it states available CSC codes are...
ATL, AVF, CNX, CYV, MOB, MTL, OMN, SIM, SWC, TCL, VD2, VDC, VDF, VDH, VDI, VGR, VIP & VOD
Any ideas?
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
sinbrad said:
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
Click to expand...
Click to collapse
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
No probs here
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
sd_N said:
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
Click to expand...
Click to collapse
Which file and which method?
aaronjp said:
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
Click to expand...
Click to collapse
Ok, Got it this time, all four files. Will give the method above a go and if it fails at least I've got the stock firmware to fall back on?
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
sinbrad said:
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
Click to expand...
Click to collapse
Glad you are sorted
Hi everybody, I do not know if there is some discussion open yet but I can not speak and write so much in English.
I come to the problem already written on the SAMSUNG ASSISTENZA forums without solving anything, the only solution to bring it into service.
Ok I have a Samsung S6 SM-G920F which now works only with 2g network, with 3g and 4g network does not work, has field but does not surf.
These tests have been carried out:
Tested SIM sim card on another phone works.
Try other cards on my phone do not work.
Done Update ITV has solved nothing.
Tried other roms I now have French Android firmware 7.0 (I've read that many have solved) flashing and hard reset all the same problem.
I have no root.
Other evidence, removed the board inserted another card nothing.
Changed APN manually.
Restore Factory Settings.
Restore network settings.
The problem has never been resolved.
Here you are a lot better in the world, maybe you know how to do it and thank you.
Sorry for my English but I used Google Translate
Did you tried to flash only modem...?
Maybe that can solve the problem, not shure....!
And better to flash the stock rom that device had when you bought it
vforvlive said:
Did you tried to flash only modem...?
Maybe that can solve the problem, not shure....!
And better to flash the stock rom that device had when you bought it
Click to expand...
Click to collapse
I tried to change only the modem I did not solve anything ....
MikiGra said:
I tried to change only the modem I did not solve anything ....
Click to expand...
Click to collapse
Ok....
Last time try this
1. Wipe everything
2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware
3. Wipe again and restart
vforvlive said:
Ok....
Last time try this
1. Wipe everything
2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware
3. Wipe again and restart
Click to expand...
Click to collapse
Ok two questions:
1 Can I flash the original modem of the device even if I have android 7.0?
2 what do you mean by "2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware" what is BTU or DBT ... sorry i do not understand some terms
MikiGra said:
Ok two questions:
1 Can I flash the original modem of the device even if I have android 7.0?
2 what do you mean by "2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware" what is BTU or DBT ... sorry i do not understand some terms
Click to expand...
Click to collapse
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
vforvlive said:
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
Click to expand...
Click to collapse
Ok ok, understand, perfect.
I noticed unpacking the firmware ITV Italia no brands that until December had a modem, modem.bin then in the next releases the modem has always been updated, since December I got the problems.
As you said you might be the file modem.bin thread that does not work well.
I tried with Odin 3.12.3 to mount the only modem.bin file in CP .... just do not install me Odin is stuck before downloading it on the phone.
Do you know how to do it and why do not you install me?
I'll try to do this and then if it's okay I'll go to the Firmware BTU or DBT .... I think the modem is the problem too because the rest of the phone works and goes only in 2G/Edge
Thanks !!!!!!!!!!!!
Ciao vforvlive
Then I tried how you said to wipe ... install the DBT 6.0.1 firmware of the latest in germany and then wipe again nothing works .... only working with 2g network.
I just noticed that H + just keeps the uploaded arrow down there is virtually no data exchange.
I also tried to put the modem.bin file when my phone worked with odin not installing me.
It's absurd I changed 20 firmware nothing ever does the same thing.
It is not even the antenna or some other thing because in 2g it normally works it obviously travels like a snail.
vforvlive said:
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
Click to expand...
Click to collapse
Then I tried how you said to wipe ... install the DBT 6.0.1 firmware of the latest in germany and then wipe again nothing works .... only working with 2g network.
I just noticed that H + just keeps the uploaded arrow down there is virtually no data exchange.
I also tried to put the modem.bin file when my phone worked with odin not installing me.
It's absurd I changed 20 firmware nothing ever does the same thing.
It is not even the antenna or some other thing because in 2g it normally works it obviously travels like a snail.
I am also facing the same issue and did not find any solution yet. If you have more info please share it