Does anyone have screen latency issues, and if so, how did you correct them?
I'm on Viper XL 3.2.6, Elemental X 5.2 and have basically reduced all OC/UV settings back to stock. When I go to wake my screen, the lock ring may be off to the side and it takes a second or two to relocate to the bottom of the screen. Then, it may unlock OK but when I go to do anything, there are delays. For example, I'll launch my Touchdown client and the PIN pad doesn't show up for a few seconds. Or I launch Apollo music and it takes a few seconds to show my installed music. Or my BT headset takes a while to connect.
All of this seemed more instant on older versions of this ROM, so I'm just wondering if there were any issues. I thought it was my overclocked GPU settings (3D 512 MHz, 2D 320 MHz), and once I reset those to stock it seemed to get better, but not as good as I think it should be. BTW, I am still getting relatively high scores in Quadrant Standard (in the high 6000s), so I know the thing is running fast.
Any ideas?
Thanks!!
I do not know if this will fix your problem but I was having the same issue. I noticed that when I went into the venom/ kernel folder there were 2 kernel images. I deleted the stock image and kept the elemental. Then ran the installer again and everything is working fine.
Sent from my HTC One X using xda premium
try changing minfree settings in tweaks app to stock
I don't have a Venom/Kernel folder. What versions are you on?
JohnnyMac999 said:
I don't have a Venom/Kernel folder. What versions are you on?
Click to expand...
Click to collapse
Lol don't think that's gonna work. That is for the venom installer I believe. Your kernel will not be there, and you cannot be running two kernels at once. Have you tried full wipe and flash a jb ROM keeping its stock kernel?
Sent from my HTC One X using xda app-developers app
ethantarheels123 said:
Lol don't think that's gonna work. That is for the venom installer I believe. Your kernel will not be there, and you cannot be running two kernels at once. Have you tried full wipe and flash a jb ROM keeping its stock kernel?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
If setting minfree back to stock doesn't take care of it, that was my plan. Thanks for the suggestion.
Related
I just recently S-off, rooted, and put ARHD on my sensation. When im using my camera then while still in camera go to lock my phone, when i try to unlock my phone it seems my phone is frozen, like its turned off, without any power. I have to take the battery out to get it to power up again.
Anyone know what the problem is?
if you have custom kernel and it downclocks during screen off that happens. Happens to me before also. I guess the camera uses much of the cpu resources, not sure... that happens to me when i set the cpu to lower clock speed at screen off.
AndroidNeophyte said:
if you have custom kernel and it downclocks during screen off that happens. Happens to me before also. I guess the camera uses much of the cpu resources, not sure... that happens to me when i set the cpu to lower clock speed at screen off.
Click to expand...
Click to collapse
I havent messed with any custom kernals.
still looking for answers...
Is this something that everyone running ARHD GB are experiencing?
el7145 said:
still looking for answers...
Is this something that everyone running ARHD GB are experiencing?
Click to expand...
Click to collapse
What kernal did you choose when installing?
Sent from my HTC Sensation XE with Beats Audio using xda premium
adamgaltress said:
What kernal did you choose when installing?
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
I chose the 1.5 OC and sony engine
el7145 said:
I chose the 1.5 OC and sony engine
Click to expand...
Click to collapse
Since you are arhd gb rom I believe you are on faux kernel. Faux gb kernels have his own implemented system which does not allow you to turn off your screen while in camera. try to avoid doing that and you are all good. Or simply move on to ics. Its about time
Sent from my Sensation running HyperNonsense v1.5
Similar issue with freezing but on ics and instead of doing it for camera it does it when I normally lock phone..Any suggestions? Havent messed with kernel either..running opensensation
sickorwuut said:
Similar issue with freezing but on ics and instead of doing it for camera it does it when I normally lock phone..Any suggestions? Havent messed with kernel either..running opensensation
Click to expand...
Click to collapse
Some kernels/apps downclock and change governor when screen goes off, if setcpu is doing it, superuser may not grant it permission for another few seconds when you try to turn on, causing it to lag, easy fix is if you just locked and want to unlock screen then press power button 3 times, will turn on instantly
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA Premium HD app
remus82 said:
Since you are arhd gb rom I believe you are on faux kernel. Faux gb kernels have his own implemented system which does not allow you to turn off your screen while in camera. try to avoid doing that and you are all good. Or simply move on to ics. Its about time
Sent from my Sensation running HyperNonsense v1.5
Click to expand...
Click to collapse
you sure about that?...my kernel is faux 004u and i didn't have any problems locking the phone and unlocking it while camera is open or may this prob is in 003m edition i guess which comes with 6.6.2
remus82 said:
Since you are arhd gb rom I believe you are on faux kernel. Faux gb kernels have his own implemented system which does not allow you to turn off your screen while in camera. try to avoid doing that and you are all good. Or simply move on to ics. Its about time
Sent from my Sensation running HyperNonsense v1.5
Click to expand...
Click to collapse
Thanks for the answer. I did a search in the faux kernel thread and confirmed the same thing. I guess the HTC camera has its own power management system which interferes with the faux PM
OllieArmageddon said:
Some kernels/apps downclock and change governor when screen goes off, if setcpu is doing it, superuser may not grant it permission for another few seconds when you try to turn on, causing it to lag, easy fix is if you just locked and want to unlock screen then press power button 3 times, will turn on instantly
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA Premium HD app
Click to expand...
Click to collapse
Wow! Really? I'm going to try this next time but I'm starting to think this is a battery issue any suggestions on how to fix battery?
Bought Mass Effect Infiltrator today as it was on sale. Wouldn't boot until I installed Chainfire 3D and disabled MapBuffer Emu I think it was.
Now after logging into Origin for first time, it crashes phone every time I try and reload the game.
My question: Whats the best SetCPU settings? I've been trying a number of max settings, and governors, and all have caused phone to reboot. If anyone knows a magic setting that would keep me from rebooting for hours and hours, it would make my night much easier.
Or are there other tricks I can try?
YouArePoop said:
Bought Mass Effect Infiltrator today as it was on sale. Wouldn't boot until I installed Chainfire 3D and disabled MapBuffer Emu I think it was.
Now after logging into Origin for first time, it crashes phone every time I try and reload the game.
My question: Whats the best SetCPU settings? I've been trying a number of max settings, and governors, and all have caused phone to reboot. If anyone knows a magic setting that would keep me from rebooting for hours and hours, it would make my night much easier.
Or are there other tricks I can try?
Click to expand...
Click to collapse
It doesn't seem to be the phone's settings. Have you tried some other ROMs? I don't know if it was posted here or not, but CM7 reloaded had a change in the video driver and may prove diagnosticly beneficial. What ROM are you running? You may want to try a FroYo ROM. Maybe one with b_kernel?
It runs fine for me on Minimal Triumph and Sharp Roms.
Sent from my ADR6400L using XDA
Running AOKP, which i realize will likely be the most problematic. Quallcomm plugin in chainfire got it running, though phone got super hot and the text was completely illegible.
Sent from my WX435 using Tapatalk 2
I think AOKP is gingerbread, right? Do you know what drivers they are using? If stock, they would have their hands full trying to make all of the connections
Sent from my Triumph using XDA
dsmryder said:
I think AOKP is gingerbread, right? Do you know what drivers they are using? If stock, they would have their hands full trying to make all of the connections
Sent from my Triumph using XDA
Click to expand...
Click to collapse
ICS
Sent from my WX435 using Tapatalk 2
I just swapped to a froyo rom definitely working alot better for games...if you have to back up and restore
I'm looking for Blues, and Strappeds Kernels. I want to get my Kernel thread updated. So hoepfully I can get a hold of a couple. Then main one I really want is Blues UV 8% Kernel. Thanks.
Sent from my myTouch 4G Slide using xda app-developers app
I got some of that stuff. I have a strapped kernel, a couple Blue kernels, a He Who Must Not be Named kernel, Virtuous V1A, bone stock that kind of thing. (I'll have to dig). I'll put up some db links a little later.
Hastily spouted for your befuddlement
AgentCherryColla said:
I'm looking for Blues, and Strappeds Kernels. I want to get my Kernel thread updated. So hoepfully I can get a hold of a couple. Then main one I really want is Blues UV 8% Kernel. Thanks.
Sent from my myTouch 4G Slide using xda app-developers app
Click to expand...
Click to collapse
I believe it's listed here in the 3rd post under BulletProof 1.1
http://forum.xda-developers.com/showthread.php?t=1835645
I'm afraid I don't have anything on any of Strapped's GB ROMs. Sorry.
I found a couple.
Stock from one of the first two firmware versions IIRC as supplied by he who must not be named - https://www.dropbox.com/s/dmfetmygompfkf6/Stock_Kernel_v1.0_CIFS_UTF8_TUN_KINETO_UC_Stable.zip
Strapped Mik touch 1.5 - https://www.dropbox.com/s/yxxpp004j4ha548/Mik-Touch-1.5 Ghz-Kernel.zip
Blue kernels - https://www.dropbox.com/s/genofmizy5zgvv9/doubleshot_GB_Base_1-7-A_kernel_2-6-35-10_installer.zip
https://www.dropbox.com/s/nuk0fgul5fwgcpd/doubleshot_GB_OC_1-5-A_kernel_2-6-35-10_installer.zip
https://www.dropbox.com/s/2x7s4koipkxjw63/doubleshot_GB_UV6_kernel_2-6-35-10_installer.zip
Unity v1a - https://dl.dropbox.com/u/22171764/unity_v1a_doubleshot.zip
Unity v2 - https://dl.dropbox.com/u/22171764/unity_v2_doubleshot.zip
I have one other I can't identify but can PM.
I have Romanbb's Kanged stock voltage and undervolted GB if you want them.
I'll see if there is anything else I can find...
AgentCherryColla said:
I'm looking for Blues, and Strappeds Kernels. I want to get my Kernel thread updated. So hoepfully I can get a hold of a couple. Then main one I really want is Blues UV 8% Kernel. Thanks.
Sent from my myTouch 4G Slide using xda app-developers app
Click to expand...
Click to collapse
I have the stock 1.63.531.2 HTC kernel as well as 3 of Strapped's 1.7 OC/UV kernels (the original, plus the remix and remix2).
We should rekang the already kanged kernel for the new stock source. Maybe today ill cook one with just a kanged clock table to see how it works out
Sent from my HTC MyTouch 4G Slide running MikXE
strapped365 said:
We should rekang the already kanged kernel for the new stock source. Maybe today ill cook one with just a kanged clock table to see how it works out
Sent from my HTC MyTouch 4G Slide running MikXE
Click to expand...
Click to collapse
Any plans for a 3.0 Sense Kernel? The soucre is public.
Sent from my Bulletproof_Doubleshot using xda app-developers app
AgentCherryColla said:
Any plans for a 3.0 Sense Kernel? The soucre is public.
Sent from my Bulletproof_Doubleshot using xda app-developers app
Click to expand...
Click to collapse
But it won't outright compile. For me at least
Sent from my HTC MyTouch 4G Slide running MikXE
strapped365 said:
But it won't outright compile. For me at least
Sent from my HTC MyTouch 4G Slide running MikXE
Click to expand...
Click to collapse
That sucks Xo
Sent from my Bulletproof_Doubleshot using xda app-developers app
AgentCherryColla said:
That sucks Xo
Sent from my Bulletproof_Doubleshot using xda app-developers app
Click to expand...
Click to collapse
Could have just been the source at the time. I deleted it and haven't looked for it since. I guess I could search for it and redownload it.
I did end up starting over on a GB kernel though, didn't mess with the .config much this time around and gonna do it one slow compile at a time with one change to see when things go south
*edit*
Ok so from the looks of the source roman had changed 2 files when overclocking and undervolting and it was for global cpu voltages (faux code). After using the code changed in arch/arm/mach-msm/kconfig the phone bootlooped at the splash screen, but the change to arch/arm/mach-msm/acpuclock-8x60.c (faux code for 1.5Ghz oc/uv?) it boots just fine,but still at full speed no matter if setcpu is ticked to set at boot or not, and my guess is that's just is what it is, )90% of kernels boot at the speed on this device. Anyways that's what I did today trying to start as simple as using code that already works. Now back to the work week
Sent from my HTC MyTouch 4G Slide running MikXE
strapped365 said:
Could have just been the source at the time. I deleted it and haven't looked for it since. I guess I could search for it and redownload it.
I did end up starting over on a GB kernel though, didn't mess with the .config much this time around and gonna do it one slow compile at a time with one change to see when things go south
*edit*
Ok so from the looks of the source roman had changed 2 files when overclocking and undervolting and it was for global cpu voltages (faux code). After using the code changed in arch/arm/mach-msm/kconfig the phone bootlooped at the splash screen, but the change to arch/arm/mach-msm/acpuclock-8x60.c (faux code for 1.5Ghz oc/uv?) it boots just fine,but still at full speed no matter if setcpu is ticked to set at boot or not, and my guess is that's just is what it is, )90% of kernels boot at the speed on this device. Anyways that's what I did today trying to start as simple as using code that already works. Now back to the work week
Sent from my HTC MyTouch 4G Slide running MikXE
Click to expand...
Click to collapse
Just from my observations, it seems there is something about a Sense ROM that causes the kernel to always boot at max speed of the kernel regardless of any settings in SetCPU or other cpu-clocking app. Only after the device is booted can you manually run SetCPU and then the desired speeds/options will take effect. I've watched it working, as soon as I boot up, I open SetCPU and just watch it... it starts out at 1.7GHz (the max on your kernel). SetCPU will then adjust it down to my desired 1.5GHz. As the phone goes through all its bootup steps (syncing, etc.), suddenly the speed will revert to 1.7GHz again. I can then reset it to 1.5 and it will remain there from then on. So, whatever it is that Sense is doing messes with the cpu clock. Non-sense ROMs don't exhibit this behavior, at least not that I've seen.
Fuzi0719 said:
Just from my observations, it seems there is something about a Sense ROM that causes the kernel to always boot at max speed of the kernel regardless of any settings in SetCPU or other cpu-clocking app. Only after the device is booted can you manually run SetCPU and then the desired speeds/options will take effect. I've watched it working, as soon as I boot up, I open SetCPU and just watch it... it starts out at 1.7GHz (the max on your kernel). SetCPU will then adjust it down to my desired 1.5GHz. As the phone goes through all its bootup steps (syncing, etc.), suddenly the speed will revert to 1.7GHz again. I can then reset it to 1.5 and it will remain there from then on. So, whatever it is that Sense is doing messes with the cpu clock. Non-sense ROMs don't exhibit this behavior, at least not that I've seen.
Click to expand...
Click to collapse
Yeah I've seen it a lot but was just rechecking and after installing super su the speed started sticking after a reboot
*edit*
A few reboots later and all is well
PM me or gtalk me for last nights build
Sent from my HTC MyTouch 4G Slide running MikXE
I'll be diving back into kernels soon.
My laptop is fried, but it'll run in ten/fifteen minute increments sitting on a handful of ice packs fresh from the freezer.
Once I finish migrating everything off of it to usb hdd devices I can start going through what I got.
Meantime, I'll browse through what I got moved onto my phones sdcard and throw some tips out. Been a while, but a quick review and I can throw down what you need to change for stable cpu table edits.
Don't want to steer ya wrong off the top of my head when it's been months since I've looked at it.
Definitely we need to get some stuff thrown around if a lot of old works were lost.
Sent from a digital distance.
This tweak has made a big difference on my phone. It could also be the combination between imo's .9 kernel and this tweak, but my phone is running really smooth and I didnt get passed 75% all day yesterday on my battery. Also when playing NOVA 3, I noticed it was smoother. Check it out and try for yourself, heres the forum link
http://forum.xda-developers.com/showthread.php?t=1877183
Interesting, how did you install it? The flammable file or manual install?
Sent from my SCH-I535 using xda app-developers app
Ok got it installed manually, download the zip, extract it and move it to the according folder, and delete the recommended file. Gonna take some time to see the diffrefences.
Sent from my SCH-I535 using xda app-developers app
I noticed the difference throughout the day. Less lag in some apps plus amazing battery life.
Sent from my SCH-I535 using xda app-developers app
What roms are u all using??
Sent from my SCH-I535 using xda app-developers app
Installed this mod.. not sure if it's really working or not.. I ran a sunspider bench which tests rendering speed of the browser and I got a 1450ms speed on CM10.. seems like it's def faster? I'm not sure though.. I want to say I used to get a 1600ish score beforehand.
ROM/Kernel combination?
I am on Paranandroid's Hybrid CM10 based ROM with Imosyen's Lean Kernel. Has someone tried this tweak with this (or any other CM10 LK combo)? Also, does this have any improvement on HDMI/MHL connectivity? If i play vids using MHL, the video kinda flickers and frames overlap.
I asked this in the main thread but figured I'd pop it here as well. I'm on a T999v GS3 (rooted), and the flash file failed in recovery and my phone doesn't have a system directory to manually put the ecg folder in. What do I do next?
Just curious.
How is this any different than selecting this in developer options?
Sent from my SGH-I535 using Tapatalk 2
Tried tonflash and it failed I'm running synergy r73
Sent from my SCH-I535 using xda app-developers app
I have the same question as WolfePack. Would enabling gpu acceleration in developer settings do just about the same thing?
The guy states...
"On ICS and JB I don't think this tweak is really necessary, GB never had it as an option, I guess that's why it feels more effective on GB roms. It's almost as if it's already rendering for UI with GPU on ICS and JB, correct me if I'm wrong it just seems that way to me. "
"Yeah I noticed that, doesn't make much of a difference on ICS for me. If you can try GB you may see a big difference."
"On ICS I can't really notice a difference, but on GB the difference is very well noticeable."
and
"debug.sf.hw=1 does that, which is very default in most build.prop I think you don't have to mess with egl.cfg if you have debug.sf.hw=1"
and on the SGS3 default is debug.sf.hw=1 already so.....
so.. are you sure your really seeing anything? I think this is bunk for us given the above points.
installed... makes ZERO difference, in feel or scores of bench marks.
but it does install just fine
Well either it's imo's .9 kernel or this mod because I'm getting 14 hours at 48%. Your benchmark scores should be lower. At least the 3d ones. But I'm not sure what the difference is for the option in the dev options
Sent from my SCH-I535 using xda app-developers app
Does LeanKernel work with TW ROMs? Where can I find it?
minmongoblin said:
Does LeanKernel work with TW ROMs? Where can I find it?
Click to expand...
Click to collapse
There is a separate version for TW ROMs.
http://rootzwiki.com/topic/31329-kerneltouchwiz-leankernel-minimalistic-kernel-v09-914/
I've been running them on beans ROMs for a while now.
Sent from my SCH-I535 using xda app-developers app
when i was on ICS rom whether being cleanrom or viperxl i can get at least 24 hours with 2-3 hours of screen time. now with JB i am not getting that. i am using the same apps and widgets. right now i am using custom kernels(that is suppose to improve battery life). is JB using more battery than ICS?
i flash different roms cm10, aopk, miui, and sense base, and using different kernels. is it possible along the way something went wrong causing my battery to deteriorate?
claudiuslu2011 said:
when i was on ICS rom whether being cleanrom or viperxl i can get at least 24 hours with 2-3 hours of screen time. now with JB i am not getting that. i am using the same apps and widgets. right now i am using custom kernels(that is suppose to improve battery life). is JB using more battery than ICS?
i flash different roms cm10, aopk, miui, and sense base, and using different kernels. is it possible along the way something went wrong causing my battery to deteriorate?
Click to expand...
Click to collapse
I think I'm getting just as good battery life now as on ICS. ViperXL + undervolted elementalX.
I still have 29% left on that screenshot.
Try app called greenify from play store. I wasn't sure of it at first but it works great at keeping residual processing hogs like Facebook, Google maps, and anything else you chose in a frozen yet accessible state unlike titanium backups "freeze" which leaves it less accessible
Sent from my HTC One X using xda premium
i will give that app a try.
is one hour of game playing same as one hour of youtube? use same battery?
so i charge my phone this morning and it says 100% with green led light, then i restart the phone now it only shows 87%, so i shut off the phone to charge, took maybe 10 mins and it is back to 100%. any ideas??
Are you overclocking the custom kernel?
What radio? You might try the JB radio, as there might be a ROM/radio mismatch causing some extra battery drain.
i am using latest att JB radio with cleanrom 6. running vanilla elemental x 5.3, cpu set at 192/1350
claudiuslu2011 said:
i am using latest att JB radio with cleanrom 6. running vanilla elemental x 5.3, cpu set at 192/1350
Click to expand...
Click to collapse
Use BetterBatteryStats app to monitor if you have any wakelocks.
http://forum.xda-developers.com/showthread.php?t=1179809
unforseenenemy said:
Try app called greenify from play store. I wasn't sure of it at first but it works great at keeping residual processing hogs like Facebook, Google maps, and anything else you chose in a frozen yet accessible state unlike titanium backups "freeze" which leaves it less accessible
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Maps doesn't seem to show up in my list.
Sent from my HTC One X using xda premium
ECEXCURSION said:
Maps doesn't seem to show up in my list.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Mine didn't at first either until I opened Facebook or some other app like that that was trying to access location.
Sent from my HTC One X using xda premium
Still not showing maps in the list. It shows all of the other apps fine though. Does maps have to be a user app instead of a system app?
Sent from my HTC One X using xda premium