[Q] Wipe data/ factory reset stuck - Samsung Galaxy Tab Plus

I try to turn my tab plus P6200 to CM10, unfortunately my tab stuck when wiping data...
What I do it before this...
I copy cm10, gapps and also clockworkmod into my SDcard..
After that I enter to CWM....
And I install CM10 and gapps...
I wipe cache and wipe data...
I gt stuck when wiping data...
After that, my tab won't boot...
It just stuck on 'Samsung galaxy tab plus' screen...
Anyone can help me?
Thanks..

This has been answered a lot of times before in various threads.
Before you start doing anything....
the most important things to know are:
1. How to use ODIN for desktop (or Heimdall, if yout prefer).
2. How to properly root and install CWM.
3. How to use CWM.
the important things to have handy in a directory in your SDCard:
Mobile recovery (so you're not caught with your pants down while away from a desktop):
1. Rooting files for ICS (non permanent touch CWM and the CWM install file for ROOT).
2. CWM installable Honeycomb or ICS original ROM.
3. CWM installable CWM 6.0.27
4. CM9, CM10 or CM10.1 whatever it is you fancy.
5. Mobile ODIN
If your near a desktop (in a flash drive, or if it's your own computer):
1. Latest installation of KIES.
2. ODIN 1.85
3. Latest ICS or HC MD5's
4. Odin flashable CWM 6.027
NOW.... to recover from your problem.
1. Be sure to have KIES installed on your PC.
2. download the latest firmware from here: http://live.samsung-updates.com/index.php?device=GT-P6200
3. turn of your tab and turn it on while pressing the down volume button. Keep holding power and the (-)vol button until the bootscreen. let go of the power button and keep holding the (-)vol button until you get into "Download Mode"
4. Extract the Firmware. (unzip the firmware in a directory. you'll now have an xxxx.md5 file)
5. open Odin. plug you tab to the computer. 1st bar under ID:COM will turn yellow.
6. click PDA and navigate to and select the md5 file you have extracted.
7. Click start.
in a few minutes you'll have an HC or ICS stock P6200.
in the mean time, read these:
http://forum.xda-developers.com/showthread.php?t=1367249
http://forum.xda-developers.com/showthread.php?t=2112667
http://forum.xda-developers.com/showthread.php?t=1517934

viper001 said:
This has been answered a lot of times before in various threads.
Before you start doing anything....
the most important things to know are:
1. How to use ODIN for desktop (or Heimdall, if yout prefer).
2. How to properly root and install CWM.
3. How to use CWM.
the important things to have handy in a directory in your SDCard:
Mobile recovery (so you're not caught with your pants down while away from a desktop):
1. Rooting files for ICS (non permanent touch CWM and the CWM install file for ROOT).
2. CWM installable Honeycomb or ICS original ROM.
3. CWM installable CWM 6.0.27
4. CM9, CM10 or CM10.1 whatever it is you fancy.
5. Mobile ODIN
If your near a desktop (in a flash drive, or if it's your own computer):
1. Latest installation of KIES.
2. ODIN 1.85
3. Latest ICS or HC MD5's
4. Odin flashable CWM 6.027
NOW.... to recover from your problem.
1. Be sure to have KIES installed on your PC.
2. download the latest firmware from here: http://live.samsung-updates.com/index.php?device=GT-P6200
3. turn of your tab and turn it on while pressing the down volume button. Keep holding power and the (-)vol button until the bootscreen. let go of the power button and keep holding the (-)vol button until you get into "Download Mode"
4. Extract the Firmware. (unzip the firmware in a directory. you'll now have an xxxx.md5 file)
5. open Odin. plug you tab to the computer. 1st bar under ID:COM will turn yellow.
6. click PDA and navigate to and select the md5 file you have extracted.
7. Click start.
in a few minutes you'll have an HC or ICS stock P6200.
in the mean time, read these:
http://forum.xda-developers.com/showthread.php?t=1367249
http://forum.xda-developers.com/showthread.php?t=2112667
http://forum.xda-developers.com/showthread.php?t=1517934
Click to expand...
Click to collapse
hi..i follow all the instruction but still stuck on the samsung galaxy tab 7.0 plus...not the samsung boot logo..any other way to solve this..i've already install permenant cwm6..and it start the tab it self when i'm trying to wipe data n cache..i try to flasing stock rom but it still stuck the same way...thanks in advance..

jerung16 said:
hi..i follow all the instruction but still stuck on the samsung galaxy tab 7.0 plus...not the samsung boot logo..any other way to solve this..i've already install permenant cwm6..and it start the tab it self when i'm trying to wipe data n cache..i try to flasing stock rom but it still stuck the same way...thanks in advance..
Click to expand...
Click to collapse
Are you flashing HC or ICS? Its better (for me) to flash HC first then wipe cache wipe partition.. wiping from HC will get your phone booting.. hope this helps
Sent from my GT-P6200 using XDA Premium HD app

theejay0625 said:
Are you flashing HC or ICS? Its better (for me) to flash HC first then wipe cache wipe partition.. wiping from HC will get your phone booting.. hope this helps
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
i'm wiping ics..i don't try the hc wiping...hope it can solve it..
---------- Post added at 12:08 PM ---------- Previous post was at 12:00 PM ----------
jerung16 said:
i'm wiping ics..i don't try the hc wiping...hope it can solve it..what hc rom can fit xme,idon't find any in the link...only ics
Click to expand...
Click to collapse
..

i've flash the HC but it still like that..its keep restarting at the samsung galaxy tab 7.0plus again and again..it cannot go to recoverymod anymore...just stuck at updating application and restart but still stuck...no reboot..two time flashing still can't...any other way please..

Man, you wipe data over the ICs original recovery????? if yes, your tab as bricked, and you need to return to service the tab...

Wiping from stock recovery ICS causes your tab to be bricked.. weren't you aware of that before? But wiping ICS with CWM is safe and stock recovery of HC is safe
Sent from my GT-P6200 using XDA Premium HD app

Related

My device freezed..plz help

Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.
MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.
mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient

[Q] How To Root Galaxy Tab 7.7 (JB 4.1.2)???

is there anyway root galaxy tab 7.7 jb 4.1.2?
xiaoakio said:
is there anyway root galaxy tab 7.7 jb 4.1.2?
Click to expand...
Click to collapse
CWM from here: http://forum.xda-developers.com/showthread.php?t=2139766 then
SuperSU from here: http://forum.xda-developers.com/showthread.php?t=1538053
Tutorial here
http://forum.xda-developers.com/showthread.php?t=1849235
Thanks
Thanks Everybody....i did it
own u all bro
xiaoakio said:
Thanks Everybody....i did it
own u all bro
Click to expand...
Click to collapse
Glad to help
Maybe click the Button so as to reflect in our Thanks Meter:angel:
Edit
Whoops, back track. I just noticed the OP request is for JB. My link is for ICS. To be safe, this needs confirmation that it works in JB. Sorry.
rebski said:
Glad to help
Maybe click the Button so as to reflect in our Thanks Meter:angel:
Edit
Whoops, back track. I just noticed the OP request is for JB. My link is for ICS. To be safe, this needs confirmation that it works in JB. Sorry.
Click to expand...
Click to collapse
Doesn't work for me. Signature verification failed.
that supersu will work on anything... you just need to flash CWM...
So it must flash cwm first, is it will get yellow triangle and binary counter?
is there temporary cwm?
Sent from my GT-P6800 using Tapatalk 2
nope... we wont have yellow triangle or binary counter count... we are not note/note2/s3/s4
Thanks. So there is no yellow triangle or binary counter effect when flashing via odin for 7.7.
Sent from my GT-P6800 using Tapatalk 2
the universal root works, got my jb4.1.2 rooted. now removing the bloatwares.
Any other way to inject cwm without using odin on pc? I'm trying to root this one but i need first to install cwm. I don't want to increase my flash counter.
| Sent from GT-P6800 using Tapatalk HD |
Well there is heimdall 1.3.1, but you still need a pc..
biopsin said:
Well there is heimdall 1.3.1, but you still need a pc..
Click to expand...
Click to collapse
I guess i have no choice then. Time to say Goodbye to my warranty.
UPDATE:
My custom binary download is still "NO". I think it will start counting when you flashed a full custom rom using odin3 on pc. I'm gonna use mobile odin pro now.
Fulaeetoy said:
I guess i have no choice then. Time to say Goodbye to my warranty.
UPDATE:
My custom binary download is still "NO". I think it will start counting when you flashed a full custom rom using odin3 on pc. I'm gonna use mobile odin pro now.
Click to expand...
Click to collapse
i forgot how many times i had flash my device... the counter still said no... so it wont increase... and i had sent my device in its root condition due to hardware failure... twice... the service centre dont even care... :highfive: i flash the latest jb around 7 times already as i experimenting some other device mod that might be compatible with the tab... (yup i'm lazy to do nandroid backup) and several times more as i am perfecting the damn script for making my new deodexed slim version of current jb release... the counter still NO... so dont worry... flash awayyyy...
edan1979 said:
i forgot how many times i had flash my device... the counter still said no... so it wont increase... and i had sent my device in its root condition due to hardware failure... twice... the service centre dont even care... :highfive: i flash the latest jb around 7 times already as i experimenting some other device mod that might be compatible with the tab... (yup i'm lazy to do nandroid backup) and several times more as i am perfecting the damn script for making my new deodexed slim version of current jb release... the counter still NO... so dont worry... flash awayyyy...
Click to expand...
Click to collapse
True. We're in the same scenario and i thought they didn't care at all about users installing custom roms. One time, i go to their shop to service my unit because of software issues. I was surprised that they recommend me to flash my own unit using odin, even my unit is still under warranty. I think they are too lazy to flash a unit that is still under warranty because it covers it all (No pay). Another day i visit their store and i noticed their 2 tabs has Supersu on it. LOL.
This is is my 1st time to use odin pc to my tab. I frequently used mobile odin pro on my android devices. That's right! Flash to the max!
| Sent from GT-P6800 using Tapatalk HD |
Can someone describe how to root the P6800 with Stock JB in detail? I have tried following the links in the earlier posts, but with no success. I had it rooted with 4.0.4, and need root to get a higher volume.. cwm-6.0.3.0-p6800.tar did not work with Odin. isn't there a zip file so I can root from standard recovery?
jorkus said:
Can someone describe how to root the P6800 with Stock JB in detail? I have tried following the links in the earlier posts, but with no success. I had it rooted with 4.0.4, and need root to get a higher volume.. cwm-6.0.3.0-p6800.tar did not work with Odin. isn't there a zip file so I can root from standard recovery?
Click to expand...
Click to collapse
Below are the instructions i put together for myself when going to ICS, it should work for JB too. This is a link to my dropbox folder with all the files https://www.dropbox.com/sh/ncr4cya5mx8ieje/NKlP1C5naD It may be that your cwm file is corrupt so try downloading again.
Flash the "Root_SuperSU.0.95.Only-signed.zip" directly in stock recovery 3e, no need to cwm:
How to do that?
- Download the Root_SuperSU.0.95.Only-signed.zip
- I will create Universal Root folder (Optional)
- Put the created folder at your External Micro SDcard
- Boot to recovery (Hold Power+Volume Up)
In official stock recovery 3e:
- Use Volume button to navigate to apply update from external storage. > View Image <
- After you choose apply update from external storage
- Press Power button to enter
- Volume button to navigate to the Universal Root folder. > View Image <
- Choose Root_SuperSU.0.95.Only-signed.zip > View Image <
- Press Power button
- Flashing begin >View Image<
Once done
- Navigate to ../ and press Power button
- navigate again to ../ and press power button
- and reboot system now
Your device will be rebooted and enjoy your rooted ICS. No cwm recovery
To install CWM Recovery using Mobile Odin.
- Download Locerra's cwm recovery. Im using Locerra's recovery v5.5.0.4: HERE
- Once download, extract it and it will be recovery.img
- Put it in Internal or External SDcard (Up to you, which convenience for you)
- Launch Mobile Odin
- Choose Open file and choose the location where you put it earlier
- Choose the recovery.img
- Flash firmware
Note: There will be POP UP window indicated
CONTINUE AT YOUR ON RISK - Click Countinue
- Done
To install CWM using PC odin:
Power OFF your device
Boot into download mode by pressing and holding ‘volume down’ + ‘Power’ buttons until your device’s screen displays an yellow warning alert.
Press ‘volume up’ to confirm the download mode boot. Now, an Android logo with the ‘downloading’ text will appear.
Launch Odin executable on your PC.
After Odin launches successfully you need to connect the device to your computer via USB cable.
In Odin you should see the text ‘added’ displayed, which means that all drivers have been installed and you are free to move to the next step.
Go to Odin and click the button that says ‘PDA’. Browse for the CWM recovery .tar file
Next, press the ‘Start’ button and Odin will start to install ‘clockworkmod recovery’ on your device
When the install is finished, your device should restart and when the Samsung loading logo appears you need to disconnect the device from your PC. Odin will now say ‘PASS’ and that would be all. Your phone is now running the CWM Recovery image.
nutley said:
Below are the instructions i put together for myself when going to ICS, it should work for JB too. This is a link to my dropbox folder with all the files https://www.dropbox.com/sh/ncr4cya5mx8ieje/NKlP1C5naD It may be that your cwm file is corrupt so try downloading again.
Flash the "Root_SuperSU.0.95.Only-signed.zip" directly in stock recovery 3e, no need to cwm:
How to do that?
- Download the Root_SuperSU.0.95.Only-signed.zip
- I will create Universal Root folder (Optional)
- Put the created folder at your External Micro SDcard
- Boot to recovery (Hold Power+Volume Up)
In official stock recovery 3e:
- Use Volume button to navigate to apply update from external storage. > View Image <
- After you choose apply update from external storage
- Press Power button to enter
- Volume button to navigate to the Universal Root folder. > View Image <
- Choose Root_SuperSU.0.95.Only-signed.zip > View Image <
- Press Power button
- Flashing begin >View Image<
Once done
- Navigate to ../ and press Power button
- navigate again to ../ and press power button
- and reboot system now
Your device will be rebooted and enjoy your rooted ICS. No cwm recovery
To install CWM Recovery using Mobile Odin.
- Download Locerra's cwm recovery. Im using Locerra's recovery v5.5.0.4: HERE
- Once download, extract it and it will be recovery.img
- Put it in Internal or External SDcard (Up to you, which convenience for you)
- Launch Mobile Odin
- Choose Open file and choose the location where you put it earlier
- Choose the recovery.img
- Flash firmware
Note: There will be POP UP window indicated
CONTINUE AT YOUR ON RISK - Click Countinue
- Done
To install CWM using PC odin:
Power OFF your device
Boot into download mode by pressing and holding ‘volume down’ + ‘Power’ buttons until your device’s screen displays an yellow warning alert.
Press ‘volume up’ to confirm the download mode boot. Now, an Android logo with the ‘downloading’ text will appear.
Launch Odin executable on your PC.
After Odin launches successfully you need to connect the device to your computer via USB cable.
In Odin you should see the text ‘added’ displayed, which means that all drivers have been installed and you are free to move to the next step.
Go to Odin and click the button that says ‘PDA’. Browse for the CWM recovery .tar file
Next, press the ‘Start’ button and Odin will start to install ‘clockworkmod recovery’ on your device
When the install is finished, your device should restart and when the Samsung loading logo appears you need to disconnect the device from your PC. Odin will now say ‘PASS’ and that would be all. Your phone is now running the CWM Recovery image.
Click to expand...
Click to collapse
Thank's for your quick help, and for sharing your files! But... When trying to apply the root_super_su from recovery I get signature verification failed
I've added some newer version of the file, give try those a try.
Also take a look here http://forum.xda-developers.com/showthread.php?t=1746794 It is a very comprehensive guide that shouldnt be any different to the 7.7

[NEW METHOD]Root SGAP GT-S7500[GUIDE][UPDATED]

Install CWM 5.5.0.4, Root, BusyBox & Init.d Support(NEW METHOD)
Samsung Galaxy Ace Plus (GT-S7500)​
Requirements :
Odin3 Flash Program
CWM Package
SuperSU Package
BusyBox.zip
Windows PC
Samsung Drivers Installed (Get from Here If not installed)
GT-S7500 only
Disclaimer:
Make Sure you have GT-S7500 only and no other variant.
Make Sure you are ready with all the stuffs mentioned above
You are Doing all this at your own risk
No developer will be responsible if you Brick your device
CWM Procedure:
Download all the things Mentioned Above
Extract Odin3.zip
Extract cwm-trebon.zip and place it inside Odin3 folder
Copy UPDATE-SuperSU-vx.xx.zip and Busybox.zip to root of External SD of your Phone
Now Open Odin3 v1.85.exe
Check Auto Reboot, F. Reset Time & PDA only
Uncheck everything that is not mentioned above
Now Click on PDA and select cwm-trebon.tar.md5
Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
Now Press Volume Up to Continue
Now the Phone is Ready to be connected to PC
Connect your Phone to PC
Odin3 will detect your Phone and The Box will turn yellow
Now Recheck whether every thing mentioned above is done or not
Now hit Start Button to begin Flashing
After flashing is done the phone will reboot
Now the CWM is installed
Now follow Rooting Procedure
Rooting + BusyBox Procedure:
Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
Now in CWM navigate to Install Zip From SDcard using Volume Keys
Now Select Choose Zip from SDcard by pressing Home Key
Now select UPDATE-SuperSU-vx.xx.zip
Select Yes to Install
Now select BusyBox.zip
Select Yes to Install
After Install is done Reboot Your Phone
Now you are Rooted with Init.d Support
Note :
The Yellow Triangle at boot doesn't matter You can remove it by Using Triangle Away App from Here
(GUIDE FOR TRIANGLE AWAY ON MY FAQ THREAD)
Don't forget to Visit This FAQ thread
Credits :
mb-14
Chainfire
Nice work pawan !
keep it up!!:laugh::laugh:
you rock for ace plus!!!
Awesome
Sent from my GT-I9500 using Tapatalk 2
Guide Updated
why don't you make a package file flashable root (SuperSU + BusyBox) to be more efficient
I have a question. After this root, stock recovery will be replaced by CWM. So is it possible to go back to stock recovery after rooting?? And If it is possible then will be noticeable by samsung if I go to samsung care??
I'm new in rooting....
Jayadratha Mondal said:
I have a question. After this root, stock recovery will be replaced by CWM. So is it possible to go back to stock recovery after rooting?? And If it is possible then will be noticeable by samsung if I go to samsung care??
I'm new in rooting....
Click to expand...
Click to collapse
Yes, You can go back to stock recovery any time you want, just flash stock rom and you will also be unrooted.
Flashing and installing new roms from CWM is different??
Flashing and installing new roms from CWM is different?? I mean in case of installing from CWM, no flashing occurs?? May be its a dump like question but please answer..
1. I want to know the differences between flashing and installing roms from CWM
2. All are those attached files latest versions? i.e CWM, busybox & SuperSU?
Jayadratha Mondal said:
Flashing and installing new roms from CWM is different?? I mean in case of installing from CWM, no flashing occurs?? May be its a dump like question but please answer.. I want to know the differences between flashing and installing roms from CWM
Click to expand...
Click to collapse
We flash Stock Rom using Odin and We install Custom Rom using CWM.
Flashing Stock Rom using Odin includes the whole firmware of our phone including Stock Recovery And Installing Custom Rom from CWM includes Only System folder and kernel.
kk9999gada said:
We flash Stock Rom using Odin and We install Custom Rom using CWM.
Flashing Stock Rom using Odin includes the whole firmware of our phone including Stock Recovery And Installing Custom Rom from CWM includes Only System folder and kernel.
Click to expand...
Click to collapse
Ok both odin and CWM flashes the NAND memory then??
& all are those attached files latest versions? i.e CWM, busybox & SuperSU? Or I can get more latest versions of those files.?
Jayadratha Mondal said:
Ok both odin and CWM flashes the NAND memory then??
& all are those attached files latest versions? i.e CWM, busybox & SuperSU? Or I can get more latest versions of those files.?
Click to expand...
Click to collapse
Yes, all the files attached are latest version.
kk9999gada said:
Yes, all the files attached are latest version.
Click to expand...
Click to collapse
When I flashed CWM now its shows a yellow triangle. So is it necessary to remove using the app before installing custom rom of yours or do that after rom installation???
Sent from my GT-I9300 using xda premium
nightwing90 said:
When I flashed CWM now its shows a yellow triangle. So is it necessary to remove using the app before installing custom rom of yours or do that after rom installation???
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's not necessary to remove it, however, it's better to do so before any rom installation (just in case your rom installation went wrong and you needed to take your phone to samsung care/service center).
Thanks for the wonderful tutorial and effort!
Worked like a charm!
Cheers :good:
Hello guys. One question - why after this rooting, my wifi ability just gone? I can find a wireless networks, i can apply the password, but i can see only "Obtaining IP address..." ?
MoHuToP said:
Hello guys. One question - why after this rooting, my wifi ability just gone? I can find a wireless networks, i can apply the password, but i can see only "Obtaining IP address..." ?
Click to expand...
Click to collapse
The problem must be in connection. It is not due to rooting.
kk9999gada said:
The problem must be in connection. It is not due to rooting.
Click to expand...
Click to collapse
Yes, it looks like bad wireless home network. Thanks for the info!
The method is easy and well constructed, but I want to add something else:
I think is better to add in step 4 - Copy SuperSU-v1.25.zip and BusyBox.zip to root of External SD of your Phone
Newbies will avoid to turn off their devices.
+1 thanks or thumbs up or etc. for ya ; )
Odin has two yellow box and hanging at setup connection
kk9999gada said:
Install CWM 5.5.0.4, Root, BusyBox & Init.d Support(NEW METHOD)
Samsung Galaxy Ace Plus (GT-S7500)​
Requirements :
Odin3 Flash Program
CWM Package
SuperSU Package
BusyBox.zip
Windows PC
GT-S7500 only
Pre-Requisites:
Don't forget to install drivers before doing anything
Make Sure you have GT-S7500 only and no other variant.
Make Sure you are ready with all the stuffs mentioned above
You are Doing all this at your own risk
No developer will be responsible if you Brick your device
CWM Procedure:
Download all the things Mentioned Above
Extract Odin3.zip
Extract cwm-trebon.zip and place it inside Odin3 folder
Copy SuperSU-v1.25.zip and Busybox.zip to root of External SD of your Phone
Now Open Odin3 v1.85.exe
Check Auto Reboot, F. Reset Time & PDA only
Uncheck everything that is not mentioned above
Now Click on PDA and select cwm-trebon.tar.md5
Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
Now Press Volume Up to Continue
Now the Phone is Ready to be connected to PC
Connect your Phone to PC
Odin3 will detect your Phone and The Box will turn yellow
Now Recheck whether every thing mentioned above is done or not
Now hit Start Button to begin Flashing
After flashing is done the phone will reboot
Now the CWM is installed
Now follow Rooting Procedure
Rooting + BusyBox Procedure:
Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
Now in CWM navigate to Install Zip From SDcard using Volume Keys
Now Select Choose Zip from SDcard by pressing Home Key
Now select SuperSU-v1.25.zip
Select Yes to Install
Now select BusyBox.zip
Select Yes to Install
After Install is done Reboot Your Phone
Now you are Rooted with Init.d Support
Note :
The Yellow Triangle at boot doesn't matter You can remove it by Using Triangle Away App from Here
Don't forget to Visit This FAQ thread
Credits :
mb-14
Chainfire
Click to expand...
Click to collapse
Hi kk9999gada
Odin is hanging at Setup connection. I tried all solutions mentioned on this forum and google and tried different Odin versions but still no luck.
could u plz suggest some way or any other replacement of odin. I am new to rooting and very excited to do and worked very hard to resolve that setup connection issue but couldn't find any way yet ... ...
one more thing i noticed that i can see two yellow box in Odin after connecting my mobile to PC 0:COM22 and 1:COM16 .. is it usual.. i saw many screenshot on this forum no one show 2 yellow box.... this happens when i 1st start Odin then connect phone to pc but when i connect phone to pc 1st and then start Odin then only one yellow box is visible that is 0:COM22...please suggest....
aronxda said:
Hi kk9999gada
Odin is hanging at Setup connection. I tried all solutions mentioned on this forum and google and tried different Odin versions but still no luck.
could u plz suggest some way or any other replacement of odin. I am new to rooting and very excited to do and worked very hard to resolve that setup connection issue but couldn't find any way yet ... ...
one more thing i noticed that i can see two yellow box in Odin after connecting my mobile to PC 0:COM22 and 1:COM16 .. is it usual.. i saw many screenshot on this forum no one show 2 yellow box.... this happens when i 1st start Odin then connect phone to pc but when i connect phone to pc 1st and then start Odin then only one yellow box is visible that is 0:COM22...please suggest....
Click to expand...
Click to collapse
Please don't Quote the whole OP it is against xda rules.
You should boot in download mode in order to flash anything via Odin.

Another boot loop

Tried to change roms and somewhere in the process it got to the Samungs logo and wouldn't continue. I've tried changing recoveries and roms with the same results. I even tried CynagenMod rom and it just changes the logos of the boot screen. I can get into recovery and into download mode. Anyone have any ideas? I'm running out.
Please help!
I have this same problem
I have the N8013 version.
Installed a rom then tried to revert back to previous rom. and got stuck on the SAMSUNG logo. Can get into Download mode, and Recovery Mode.,,but nothing helps. I have tried several methods:
1. ODIN- CWM and TWRP recoveries, and a number of stock and custom roms floating around the troubleshoot forum...got" PASS" on the ODin after attempting to install stock tar images but tablet still gets stuck at SAMSUNG
2. Sideloads of zip files..I get 2 different errors that after doing research seem common on the websites. I suggested to use touchwin recovery instead of CWM, CWM gave another error. .Long story short sideloading is not working either.
Any thoughts, suggestions...help please!
KL
wipe data and cache
wipe cache partition
wipe dalvik cache
and reboot the rom will boot up
THERE IS A THANKS BUTTON ON THE LEFT
Tried that numerous times.
Sent from my VS980 4G using xda app-developers app
Jaspreet.master7 said:
wipe data and cache
wipe cache partition
wipe dalvik cache
and reboot the rom will boot up
THERE IS A THANKS BUTTON ON THE LEFT
Click to expand...
Click to collapse
Thanks for the reply....
I tried what you suggested:
wiped data/factory reset
wiped cache
wiped dalvik cache
Then installed the following tar file: N8013RootInjectedSystem from http://forum.xda-developers.com/showthread.php?t=1831152&page=4
Got stuck on the Samsung screen.
From my experience you wipe before installing the rom.. Correct?
Jaspreet.master7 said:
wipe data and cache
wipe cache partition
wipe dalvik cache
and reboot the rom will boot up
THERE IS A THANKS BUTTON ON THE LEFT
Click to expand...
Click to collapse
I installed: CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 via Odin, the process passed, and tablet booted into stock recovery.
Did a factory reset from stock recovery and attempted to reboot, but still got stuck at the Samsung logo.
Any suggestions of how to proceed from here?
Any help or suggestions would be appreciated. I do have 2 backups but they are on my external microsd,and will not load in stock recovery...not even able to access my micro sd from custom recoveries.
Any help or suggestions would be greatly appreciated.
TIA
KL
Fixed following these instructions: http://forum.xda-developers.com/showthread.php?t=2108145
The noteable suggestion seemed to be to format everything except external memory...
the only problem is now i am unable to view microsd....but i am happy happy happy
let me know if this works
HOW TO FIX A STUCK BOOT SCREEN ON GALAXY NOTE 10.1 N8013 4.1.2
1.) Download ODIN (just google it)
2.) FLASH ClockworkMOD (CWM) using ODIN to Device (just google it)
A.) Before pressing "START" Uncheck all options ( Auto-reboot, F-reset (re-partition should already be unchecked etc) Just hold the power button device to reset, it will reset on it's own upon start up
4.) Download Firmware Hotfile Linked By the Beautiful Samir who commented on this thread (just search for him). Make sure that fireware is designated for your particular device. No Samsung SIII firmware for Samsung Galaxy Note 10.1.
A.) Use the "Save to" Option not the "Open With" option...It's just better
5.) Enter Recovery Mode (CWM Mode) on device using the Power + Volume UP key
6.) Factory Reset Wipe
7.) Wipe Cache
8.) Advance Settings - Clear Davlink Cache & Fix Permissions
9.) Mounts & Storage - Format all except your external SD card (be careful and watch what your doing don;t want to delete anything else by mistake..cause you will be really..cough..upset)
A.) be forewarned that after these wipes you won't be able to get past the first Samsung logo screen, it will just remain there on the screen but have no fear it should be fixed when you download the Firmware. KAY. breathe easy.
B.) i mention this because my problem was that i was getting past the first Samsung logo but not past the second one, in the sense that it wasn't even appearing on the screen.
10.) Make sure that your USB drivers for Samsung are working, you can get the driver from Samsung site (Google it) or use KIES (Google it)
A.) if you use KIES i advise you to download it, get the Samsung USB drivers from it, then go to control panel on your desktop and Uninstall it, you can download it again later when your Note is working again but it seems to cause problems with ODIN, better safe than sorry i always say
11.) The Firmware can be a particularly long download, but once it is done and you have extracted it to a folder using WINRAR (remember the name of this folder) make sure that it is saved to your computer then shutdown and restart your computer
12.) Now with your newly restarted computer.........
1.) Open ODIN
2.) Put Samsung Note 10.1 into "Download Mode"
3.) Connect your Note to Computer using USB, it should make the ID:COM turn yellow
4.) Uncheck auto-reboot, F-reset etc
5.) go to PDA and look for the folder that you placed your firmware in :KIES_Blaahblaahblahh_blaah
6.) Press START
7.) you should see a download begin both on device and within ODIN....PASSSSSS (Green Box)
8.) Reset Computer Manually by pressing the power button
9.) turn back on Galaxy Note 10.1 and you should be all set
a.) don't be scared after you turn on your note and you get the Samsung logo and then the little android robot downloading some stuff (that is supposed to happen)

[Q] How to fix samsung galaxy tab 2 7.0 boot loop

Hello, My samsung galaxy tab 2 7.0 stops at android after booting. It wont show anythings but keeps loading at android. How do i fix it.
Hold the volume up and power key together till you enter recovery, then restore backup. If you don't have backup then reflash the rom. You can also try clearing cache and dalvik cache before it. And i think it is the wrong section
---------- Post added at 09:25 AM ---------- Previous post was at 09:25 AM ----------
Do press the thanks button
No recovery
There is no clock workmod recovery installed so i cant recover any backup. It was only rooted
Use stock recovery, wipe, if that doesn't work do a restore.
Pp.
sent from my microwave running lollipop 5.0.
Mostly this problem can be solved by just doing a factory reset in the stock recovery..
If it doesnt help there is only 1 way
-installing stock firmware using odin.
Follow these steps.
1.download the stock firmware from this site.
http://www.sammobile.com/firmwares/
2. Now download odin app in ur pc/laptop.
http://odindownload.com/download/Odin3_v3.10.6.zip
3. Now charge your device above 60%, and go to download mode (power button + vol down)
And connect your device to ur pc.
4. Open odin and then select the firmware you downloaded from PDA button.
5.make sure you dont check/uncheck anything in there.just select the firmware and click start.
6.during this process it is best not to disturb your device, and if you see it rebooting dont worry it is common it will reboot several times if necessary.
7.once it is completed it will show pass in the pc.
And your device must have to reboot automatically, now remove the usb cable.
8.give it some time for booting, if it doesnt get booted even after 20 mins you can just go to the recovery mode,this time you will see the stock recovery, there perform a factory reset
9.now you can reboot,you will come to the stock firmware you had at first.
HURRAY YOU SOLVED YOUR PROBLEM!!!!
Note- remember to install your USB drivers if odin doesnt recognize your device.
Always have your device charged above 60%
Zte blade l said:
HURRAY YOU SOLVED YOUR PROBLEM!!!!
Note- remember to install your USB drivers if odin doesnt recognize your device.
Always have your device charged above 60%
Click to expand...
Click to collapse
u can install samsung kies then uninstall it only (only) to get drivers for all samsung devices

Categories

Resources