Database Info

How to Change Sprint Banner through QPST software . Less then 5 min task !!!

to everyone that want to change their sprint banner & cant or dont want to get CDMA Workshop (due to viruses in every file you can find on the net)
i copied this post from another post that i saw while trying to change my sprint banner & got to this method witch is preaty damn easy ;-)
takes less then 5 min . ** MAKE SURE YOU FOLLOW THE INSTRUCTIONS AND DONT MESS WITH OTHER THINGS IF YOU DONT KNOW WHAT YOUR DOING **
it can BRICK your phone & i will not be held Responsible to any damage you may cause while preforming this task .
I did NOT write this walk-through & again will NOT be responsible for any damages to your phone .
here are the instructions :
1. Install HTC Sync if you haven't already.
2. Download MSL Reader from the market, Run it and save the code for step 8
3. Download QPST:
http://www.x-drivers.com/catalog/fla...pst/12051.html
4. Install QPST software
5. Put phone into Diag mode: dial ##diag# = ##3424#
6. Start QPST service programming. If your phone is in diag mode you will see it listed here.
7. Click Read from phone
8. Enter your SPC number (the one obtained from step number 2)
9. Click the Display tab.
10. Change the banner to what you want.
11. Write to phone. (You may see some Read Only Errors. This is normal)
12. Reboot phone and you will see the new banner.
Should you encounter issues like the phone not showing up in QPST then more then likely
the modem drivers are using a port that QPST does not have as default and you will need to add
the port to QPST. When adding the port to QPST make sure you un-check "Show Serial and
USB/QA Diagnostic ports only" or this will not work.‎
I know there are already other threads out there that offer ways to change the sprint banner.
I wanted to also offer these set of instructions to the community as I get questions about it all the time.
Here is the way I have done it in the past. It does not require HACKED software so this method is fairly safe.
As always do a nand back up before going threw these instructions
and I can not be held responsible if you brick your phone.
Thanks to Slayer69 From XDA for the helpfull information
here is the link to original post :
http://forum.xda-developers.com/showthread.php?t=871601
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Good stuff, I'm going give it a try now.
Sent from the smoke signal app

Works flawlessly just be carefull & good luck
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

post u r new screen
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Ahem. As you can probably see on Slayer's thread, you need to make a note on here that doing this will stop the Nascar and Football apps from working. Some of us, like myself, can't use hacks like this if we use those apps as it will break them and cause them to say that it is for Sprint/Nextel only.

Anyone Evan use them ?
I deleted mine NASCAR & NFL
Never used that stuff ;-)
Sorry .
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

BTW Sprint navigation works just fine & Sprint zone also works .
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Any ideas why my phone does nothing after dialing ##diag#?

Make sure u r using the right port #
Go to device manager & go to ports & check what port # u r phone uses
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

oranium said:
Make sure u r using the right port #
Go to device manager & go to ports & check what port # u r phone uses
Sent From My Fully Rooted HTC Evo 4G Via XDA App.
Click to expand...
Click to collapse
When I plug the phone in, do I select htc sync or a different option? Then confirm the port, then dial?
Edit: where do I find the port number under device manager? For location I have a line like this: 0000.001d.0000.001d.001d.000.000.000
Sent from my PC36100 using XDA App

Connect as disk drive ? Look in device manager for ports then click it to see what port u r connected as (com1-7)
Did u get the u r phone code ?
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

Msl code ?
Sent From My Fully Rooted HTC Evo 4G Via XDA App.

oranium said:
Msl code ?
Sent From My Fully Rooted HTC Evo 4G Via XDA App.
Click to expand...
Click to collapse
MSL Reader http://www.appbrain.com/app/msl-reader/com.esccode.msl

when you plug evo to pc select CHARGE ONLY- then dial ##3424#
then run qpst service programming, read from phone (enter MSL) then, 1st click save so that you have a backup from before you change anything, then change banner text- and save again.
Make sure you have the htc diag driver installed (it won't hurt anything, it just wont connect to qpst", through device manager you might need to go to "Browse my computer for driver software" - Then- "Let me pick from a list of device drivers on my computer"-Then "Show all devices" then "Have disk" Then navigate to your folder where you have htcDiag drivers and install that way

Can anyone with an Airave verify that this mod doesn't cause any conflict with the Airave unit?

oranium said:
Anyone Evan use them ?
I deleted mine NASCAR & NFL
Never used that stuff ;-)
Sorry .
Sent From My Fully Rooted HTC Evo 4G Via XDA App.
Click to expand...
Click to collapse
It's irrelevant to ask if anyone uses them. What is relevant is that you need to add a warning on there that for those that DO use them, they will no longer work after applying this modification. Think outside of what you use.
***SINCE THE OP HAS DECIDED NOT TO ADD A WARNING FOR THOSE THAT DO USE SPRINT NASCAR AND SPRINT FOOTBALL LIVE, I'LL DO IT FOR HIM. FOR THOSE OF YOU THAT USE THESE 2 APPS, IF YOU APPLY THIS MODIFICATION, THESE APPS WILL NO LONGER WORK. THEY WILL SAY THAT THEY ARE FOR SPRINT/NEXTEL ONLY.***
Did it for you. I'll make sure a moderator knows as well. I did ask nicely.

guessing this is pc only. mac sigh...

Well I tried the method and stuff I did everything right. Once i open QPST Service Programming and i go to the display tab i enter the banner then i press write to phone. Instead of doing it, it gives me a error saying "NV_UE_IMEI_I" meaning the NV is locked. How can i unlock it? Thanks.

jay713 said:
Well I tried the method and stuff I did everything right. Once i open QPST Service Programming and i go to the display tab i enter the banner then i press write to phone. Instead of doing it, it gives me a error saying "NV_UE_IMEI_I" meaning the NV is locked. How can i unlock it? Thanks.
Click to expand...
Click to collapse
it's ok just ignore error and reboot

louforgiveno said:
it's ok just ignore error and reboot
Click to expand...
Click to collapse
LOL YEAH. I WAS HOT RESTARTING INSTEAD OF DOING A FULL REBOOT. tHANKS THOUGH

[Q] I have Bricked my "Generic" ICS 4.0.3. Any ideas?

Hi people and sorry for coming in your wonderful community with a question.
I was trying to root my Prestigio PMP3270B ICS 4.0.3 android device and now I can not get it to function.
The screen I see in the recovery mode is a broken android image without any options. Picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In normal mode I get the Touch Screen Calibration, but the touch function does not work....Picture below:
Any ideas as to how I can fix this ???
Thank you

Hi again...
I added some images. You will need to copy paste the links in my above post because I am not allowed to show them here.
Any ideas?
Thank you.

did you try the reset pinhole?
Sent from my GT-S5360 using xda app-developers app

yousef8824 said:
did you try the reset pinhole?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yes, I tried the reset pinhole without results.
If i let the device to boot (second picture link above) and connect usb cable with pc, there are 2 drives that open up in explorer. I can neither access them nor format them.....
I think its time to go for a more expensive tablet like google nexus 7 that will not let me down like this....

the arnova 7h g3 has the same problem go to arctablet fourm sign up and see you there because some one installed cwm recovery and worked
Sent from my GT-S5360 using xda app-developers app

Thanks man but cwm recovery does not work either...
Now my device won't boot at all.... Only the green LED is on when I turn it on.....
Any ideas as to how I install a custom ROM using the SD Card without USB connection?
Because I can not get it to any screen beyond blank.......
Any ideas people?

yousef8824 said:
the arnova 7h g3 has the same problem go to arctablet fourm sign up and see you there because some one installed cwm recovery and worked
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yeahh man you got a point here....
Arnova 7h G3 specs are similar to the Prestigio PMP3270B. Logically any ROM will work on both tablets.

http://www.arctablet.com/blog/forum/arnova-7h-g3/backup-original-rom/
Sent from my GT-S5360 using xda app-developers app

I am trying to "burn" that image to SD card so I can use it on my device without the use of USB....
I have tried the "Phoenix Card Tool" but I got error. I couldn't "burn" the image....
Now I am trying a tool called "Win32 Disk Imager"
I will let you know if it works..... I am up to the limit to give up....
I am going to take the device back to the shop pretending that "Oooops.... Suddenly it does not work... Strange"""
Thanks
Athanasis.
UPDATE:
I tried the tool "Win32 Disk Imager" but it does not restart to the SD card when I insert it in tablet and reset. No green rectangle.

Athanasis said:
I am trying to "burn" that image to SD card so I can use it on my device without the use of USB....
I have tried the "Phoenix Card Tool" but I got error. I couldn't "burn" the image....
Now I am trying a tool called "Win32 Disk Imager"
I will let you know if it works..... I am up to the limit to give up....
I am going to take the device back to the shop pretending that "Oooops.... Suddenly it does not work... Strange"""
Thanks
Athanasis.
UPDATE:
I tried the tool "Win32 Disk Imager" but it does not restart to the SD card when I insert it in tablet and reset. No green rectangle.
Click to expand...
Click to collapse
Try with this: http://yf2.value4it.com/Service_Files/TabletPC/PMP3270B/PMP3270B_V1.0.7_20121210.zip

WOWWW... Looks like the real thing !!!
Lets see if you are my Saint Claus.
I am "burning" it on the SD..... In a couple of minutes I will flash the device and let you know......
---------
For any outcome, thank you anyway.....:highfive:

I don't know who you are really, but I want to thank you man..... That file brought my device back to life !!!!
It was the best present I had for this Christmas......Just a minute after midnight !!!!!
Now I will not go to buy another tablet.......... THANK YOU SO MUCH FOR SAVING MY PRECIOUS CASH AND TIME !!!!!!
THANK YOU......................THANK YOU..............................THANK YOU........................................

Athanasis said:
I don't know who you are really, but I want to thank you man..... That file brought my device back to life !!!!
It was the best present I had for this Christmas......Just a minute after midnight !!!!!
Now I will not go to buy another tablet.......... THANK YOU SO MUCH FOR SAVING MY PRECIOUS CASH AND TIME !!!!!!
THANK YOU......................THANK YOU..............................THANK YOU........................................
Click to expand...
Click to collapse
Glad to hear I helped. btw. another surprise... your device IS rooted. Out of the box. Isn't Xmas time magic? Have a good one. :fingers-crossed:

I love christmas.... I have a rooted device... Wooowwww. This is what I was trying to do before the mess..... Now you came here with your magic link to make my life easier... Wooowww....
Come for a beer friend ....... :laugh:

YOU WANT TO SEE MORE ???????
Actually the link you posted was not a rooted ROM but I have managed to unlock it using the following tool and procedure:
Yes guys. I managed to do it. And yes the application that may root this tablet is called "Android ICS Root Unlocker 1.0" Developed by GreekDev -11th July 2012
This is a Zipped file that you will need to unzip.
View attachment 1591923
Make sure that USB is enabled on your tablet and also USB for debugging option is ticked to ON.
Run CMD as an administrator and then write ICS_Root_Unlocker.bat
It is important that you run it from CMD.
At each tablet reboot wait before pressing a key to continue.
Before pressing key to continue enable USB again on your tablet each time it reboots.
If you have problems contact me by quick PM.....

Athanasis said:
Actually the link you posted was not a rooted ROM but I have managed to unlock it using the following tool and procedure:
Click to expand...
Click to collapse
You have to learn a bit more about Android.
It IS rooted out of the box, script just sat qemu property in local.props to already world writable /data partition and copied su binary and SuperSU apk. It did NOT utilize any exploit to escalate privileges. This is the way how devs prefer their devices set up when developing apps that don't require root but want to keep in control of their devices.

Brother, thanks for the info. I am developing in C sharp in visual studio. Also VBA, PHP, MySQL.
To tell u the truth, this is the 1st tablet I ever had....... so you may forgive me for this initial lack of experience.
Sent from my PMP3270B using Tapatalk 2

marlasr said:
You have to learn a bit more about Android.
It IS rooted out of the box, script just sat qemu property in local.props to already world writable /data partition and copied su binary and SuperSU apk. It did NOT utilize any exploit to escalate privileges. This is the way how devs prefer their devices set up when developing apps that don't require root but want to keep in control of their devices.
Click to expand...
Click to collapse
May I ask if the patch I linked above, would root my device if it were with factory firmware.
Sent from my PMP3270B using Tapatalk 2

Athanasis said:
May I ask if the patch I linked above, would root my device if it were with factory firmware.
Click to expand...
Click to collapse
Yes, script would work. You have factory firmware right now, too. Link I've posted is factory firmware.
As for the Android programming you'll need C for DDK and Java for SDK.
Keep in mind embedded programming is quite different from desktop/web programming.

marlasr said:
Yes, script would work. You have factory firmware right now, too. Link I've posted is factory firmware.
As for the Android programming you'll need C for DDK and Java for SDK.
Keep in mind embedded programming is quite different from desktop/web programming.
Click to expand...
Click to collapse
Thank you so much....
Yes I know embedded programming is much more difficult. If I ever decide, I would probably go for the Java platform but not for complicated programs. Free time is quite limited here !!!
Athanasis
:good:

Cloudfone Excite 350g

This is a rebranded phone in the Philippines running ICS 4.0.4, has 512mb RAM, 1GHZ core. Does anyone know what the original phone is? I've had a hard time looking for pc drivers, but was able to root it with bin4ry.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent from my rooted Cloudfone Excite 350g

I just found out that the phone is a rebranded Mobistar Touch Cream 350.

Rooted the Cloudfone Excite 350g?
Hi mrichiem! I have the same phone but was unable to root it with Bin4ry v17, though I have installed the drivers using Moborobo and also tried with Super OneClick. What process have you made to root it? O_O I tried taking it to safe mode, but still the permission is still denied. I am searching ways to root it but since it was just released last December, I guess the company is suppressing the growth of tutorials of rooting their models. But I guess the company is expecting users to root it because of it's low internal memory. O_O Thanks.

::ROOT:: Cloudfone Excite 350g
Let me set down here exactly what I did to root my excite 350g. The files you will need are attached, but you will have to search and download Moborobo. I had to research the proper way to install the drivers as my first attempt ended up soft-bricking my phone. I had to bring it to the service center to have it repaired. Funny thing was my warranty still covered it, even though it was already rooted and I had changed the boring yellow bootanimation.
So, be warned and root at your own risk!!
Extract the files to a folder or your desktop. Turn off your 350g and remove the battery. The next step will take a bit of dexterity and timing. Plug the USB cable to your PC. Press and hold the Volume up button on the phone and quickly insert the battery. The pc will prompt you to install drivers for the device. Just direct the wizard to the MTK65xx Driver folder. Once drivers are installed release the volume up button. Open the MTK Android PC Sync Tool and select Cloudfone Excite 350g in the popup. This will install the MTK Suite Daemon on the phone. Once done, you can close the tool. Next open Moborobo which will automatically install additional drivers for the phone. Once you have done all of this, you may now proceed with rooting. I have included two versions of bin4ry in the file. Try using Root Mtk Android 4.0.4 v15 first. If this does not work, use Root MTK ICS. The phone should now be rooted.
Download: http://www.4shared.com/rar/kOhRfezo/DEV.html

Great!
Haha. As they were saying that the warranty will be void if you have rooted the phone. Great! Thanks! I'll try it. I hope i won't end up bricking my phone. Thanks mrichiem! :good: I will reply as soon as I have tried the method. :highfive:

Haist... after following all the instruction still after rebooting my phone dont show a super user icon. Even the computer says im already rooted
Sent from my Flare (S100)/A9 using Tapatalk 2

Please try this to know if you are really rooted...
werdna99 said:
Haist... after following all the instruction still after rebooting my phone dont show a super user icon. Even the computer says im already rooted
Sent from my Flare (S100)/A9 using Tapatalk 2
Click to expand...
Click to collapse
Please install this app from the Google PlayStore:
Android Terminal Emulator by Jack Palevich
It is mainly a Linux Command Prompt Emulator that is used to do some functions such as cp (Copy), ifconfig (Get the IP address of your phone), etc.
After you installed it, please follow the instructions below:
Open the Android Terminal Emulator App.
Type: cd root
If you see something like /system/bin/sh: cd: /root - Permission denied, you are not yet rooted. And maybe that is the reason why the SuperUser app was not installed.
Are you rooting the your CM Flare? I guess this trick works only for Cloudfone350g.

Sir, exactly how many seconds does it take for you to plug the phone via usb then hold the volume up and insert the battery?? i cannot seem to get it right. i've tried a dozen times already and i still can't get it.

No sir. Im rooting the cloudfone of my friend. I already root several android phone this unit give me head ache my cm flare ia already rooted
Sent from my Flare (S100)/A9 using Tapatalk 2

Replying to all
HI ALL!
At first I was having difficulty with this method trying this on Windows 7. But I switched to Windows XP in order to see if there would be difference. Use Windows XP instead because I have successfully rooted my phone with that.
I just rooted my phone now, so it took me a long time to reply. It is because I tried to see if someone would verify the trick and to give further instructions to it. But then, it seems no one is willing to share. XD
So here is the reason for each step of the trick.
1. Insert the USB Cable (take note, the USB cable to the PC not to the Phone), insert the battery, then hold Volume UP. This would only take less than 10 seconds. It's aim is to force the PC to detect the MTK Preloader so that you can install it the drivers for it.
2. Run MTK Android PC Sync Tool and let it install the MTK driver for your phone. The aim is to install the "debug mode MTK driver" into your Phone so that the Root by Bin4ry would be able to copy files into your Phone's internal memory and run commands.
3. Lastly, Open moborobo and let it install the Moborobo Suite Daemon into your device. The aim is just like the #2. To add drivers that will support the rooting.
Root it with Root Mtk Android 4.0.4 v15.
I have added some screenshots as a proof Hit thanks for me and mrichiem if you have succeed!

BlueFireSiege said:
HI ALL!
At first I was having difficulty with this method trying this on Windows 7. But I switched to Windows XP in order to see if there would be difference. Use Windows XP instead because I have successfully rooted my phone with that.
I just rooted my phone now, so it took me a long time to reply. It is because I tried to see if someone would verify the trick and to give further instructions to it. But then, it seems no one is willing to share. XD
So here is the reason for each step of the trick.
1. Insert the USB Cable (take note, the USB cable to the PC not to the Phone), insert the battery, then hold Volume UP. This would only take less than 10 seconds. It's aim is to force the PC to detect the MTK Preloader so that you can install it the drivers for it.
2. Run MTK Android PC Sync Tool and let it install the MTK driver for your phone. The aim is to install the "debug mode MTK driver" into your Phone so that the Root by Bin4ry would be able to copy files into your Phone's internal memory and run commands.
3. Lastly, Open moborobo and let it install the Moborobo Suite Daemon into your device. The aim is just like the #2. To add drivers that will support the rooting.
Root it with Root Mtk Android 4.0.4 v15.
I have added some screenshots as a proof Hit thanks for me and mrichiem if you have succeed!
Click to expand...
Click to collapse
Last time i used a windows 7 pc ill try your advice
Sent from my Flare (S100)/A9 using Tapatalk 2

Backup rom
Please backup rom for me, i need rom!!

I also had the same problem as I has already rooted my Excite 350g before backing up the ROM. So I had to search the net to look for a way to restore my phone in case something went wrong. And indeed, something went wrong. I ended up flashing the original Mobiistar firmware and discovered something interesting. The original camera resolution of the device is 3MP, which is what I have now. And after uninstalling the stock Vietnamese files, I ended up with 160MB of free internal memory. The site is in Tieng Viet, so use Chrome to translate the page as it loads and depend more on the screenshots than the actual instructions. As usual, flashing MTK ROMs work best on PCs running Windows XP.
Click Here to Open Link

Posting benchmark results before and after flashing the stock Mobiistar ROM.
sent from my Excite 350g

[TOOL][FAQ] M7 Multi Tool v1.1 [23-may-2013] [Root|Recovery|HTC Code|CID|Backup&R]

[TOOL][FAQ] M7 Multi Tool v1.1 [23-may-2013] [Root|Recovery|HTC Code|CID|Backup&R]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:​I will not be responsible for smashed screens, bricked phones or any other things that you can accuse me of, i've done this tool to help people, use it at your own risk and hit THANKS if you use it and like it.​
Also, to avoid useless threads on general, Q&A or useless posts, please read the FAQ below, it's like a Mini-Guide!
[highlight]This is a ALL-IN-ONE tool that can do almost everything you want with it![/highlight]
It has LINUX/UNIX and MAC support!
In order to use the linux version, read the readme-linux file, do what says there.
After that run M7MultiToolvX.X-L.sh in terminal.
MAC users should run M7MultiToolvX.X-M.sh
Enjoy and press thanks as there was some work involved here! ​[*There is an easter egg in the tool, if don't have what to do, try to find it, tip - in the main menu, find the magic letter *]
Features: ​ - Install device drivers (Windows XP/7) [Beta! Feature].
- Show you the code needed for HTCdev Site.
- Show your CID.
- Flash CWM 6.0.3.1 -Touch and Classic.
- Flash TWRP 2.5.0.0 - Touch.
- Flash Stock Recovery ( 1.29.401.16R )
- Relock your bootloader.
- Make logfiles - logcat/dmesg.
- Permanently Root your device.
- Backup and Restore.
- Fancy reboot your device .​
Download link: ​Latest:
M7 Multi Tool v1.1 - Mediafire Mirror
M7 Multi Tool v1.1 - Dev-Host Mirror ​Oder versions:
M7 Multi Tool v1.0 ​
Any other suggestions are welcomed!
Tutorials/FAQ: ​For best perfomances, extract the .zip to C:/
Q: What do i need to do in order to install a custom ROM?
1.Unlock Bootloader from htcdev.com.
2.Flash a recovery of your choice.
3.Root using the permanent root solution flashed via recovery, found in Data/Root or select the Root menu and flash your desired thingy.
4.Flash custom ROM with no problems via recovery.
All those things are found and can be done via this tool.
Q: Hi, i just downloaded this tool, how do i use it?
First, extract the folder of the archive in the root of some partition, example above and somewhere below.
After that, run M7MultiTool vX.X.bat on windows, M7MultiToolvX.X-M.sh on MAC and M7MultiToolvX.X-L.sh on Linux.
Q: I see you talk about some M7MultiTool vX.X, is that an eXtreme edition or something?
No, vX.X will be replaced with the version from the title of the thread, this is made like this to keep things clean over future updates, so there will be no need to change things all around the thread after each update.
Q: Hi, i just bought a phone what should i do now?
Well, you firstly need to unlock your bootloader, just go to HTCdev.com and follow the instructions to unlock your bootloader.
Q: What is logcat?
Well, you can pretty much use google for that answer, but to put it short, is that thingy that tells you what is happening behind the scenes of your phone.
It is usually used for debugging and entertaiment(?).
When you report an error/bug to somebody, it will be a blessing to provide a logcat (logfile)!
Q: What is DMESG?
According to wikipedia: dmesg (display message or driver message) is a command on most Linux- and Unix-based operating systems that prints the message buffer of the kernel.
We use it for debugging purposes, providing it while reporting a kernel bug/error is a blessing.
Q: Hi, i have an unlocked bootloader, what should i do now?
Well, you should flash a custom recovery via bootloader, for that you just need to turn off your phone without fastboot activated, hold Volume down + Power button untill a white screen appears, if it appears a black one with some blue letters, you probably have a fake one
Q: What is a Custom Recovery and why do i need one?
A custom recovery is that thingy that let's you flash .zip files, use your logic and you wil get it why you need one.
Q: Do i need S-OFF on my phone?
HTC One has a nice unlocked bootloader, S-OFF is not needed as you can flash custom ROM's and kernels directly via Recovery.
Also, S-OFF is not available *YET* for HTC One.
Q:There are others guides/tutorials out there, should i check them instead of this?
If you manage to get things done using this one, no, otherwise yes, note that some could be outdated ​
Changelog: ​v1.1 - 23 May 2013 - Added Permanent Root flashing.
v1.0 - 23 May 2013 - First public release, providing recovery flashing, driver installer, htcdev.com code provider, cid getter, logging (logcat and dmesg), backup and restore, rebooting.​
[highlight]
Special thanks:
- Everybody!
[/highlight]

Post reserved, just for fun

hi
link is down

babakmaham said:
hi
link is down
Click to expand...
Click to collapse
Bad paste, sorry...

Hi Lex great to see you over here on the One thread, sold my sensation XL
Sent from my HTC One using xda app-developers app

Trailblaze said:
Hi Lex great to see you over here on the One thread, sold my sensation XL
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Me too, traded my SXL to my father for the One, well, you will have the familiar Multi-Tool interface on all OS so far.

Lexmazter said:
Me too, traded my SXL to my father for the One, well, you will have the familiar Multi-Tool interface on all OS so far.
Click to expand...
Click to collapse
My friend, glad to see u here too!!!
Sent from my HTC One using xda app-developers app

Chrome keeps giving me a "Oops! Google Chrome could not find d-h.st" everytime I click the download link
edit: I got it to download

I get a dead link as well?

tenshi888 said:
I get a dead link as well?
Click to expand...
Click to collapse
Dev-Host seems to have some problems from time to time, will upload to mediafire then, more stable.

I would like some reports from MAC users, thanks!
Sent from my HTC One using xda app-developers app

Hi, permanent root does not work for me. It says unknown partition etc. etc. and points to the zip file in the /Data/Root

as i'm non-rooted i would like to make a backup of my phone first, then recover after the root process. can this be done successfully.....................sudeki300

frenccw said:
Hi, permanent root does not work for me. It says unknown partition etc. etc. and points to the zip file in the /Data/Root
Click to expand...
Click to collapse
Will investigate this problem this weekend.
sudeki300 said:
as i'm non-rooted i would like to make a backup of my phone first, then recover after the root process. can this be done successfully.....................sudeki300
Click to expand...
Click to collapse
I know you need adb debugging on, don't know if it will work without root, you can give it a try, if it doesn't work, you can use Helium from Google Play, can backup even on non-rooted devices, but beware, i used it and for example CSR Racing couldn't be restored, so i remained with my online save, which was waaay behind.
Hope this helps.

@Lexmazter, luckily the games i have on my phone have not been started yet. only some emulators that have some real-time saves on them, they should be easily copied back and forth from the internal memory. probably just gonna copy all files from internal to pc and then copy them back after rooting then re-install the apps \ games manually.....................sudeki300

sudeki300 said:
@Lexmazter, luckily the games i have on my phone have not been started yet. only some emulators that have some real-time saves on them, they should be easily copied back and forth from the internal memory. probably just gonna copy all files from internal to pc and then copy them back after rooting then re-install the apps \ games manually.....................sudeki300
Click to expand...
Click to collapse
Well, you can try the backup and restore feature, as i didn't had the chance to test it on non-rooted phones and please report your findings as it will help me to improve the tool.
Thanks

Do people still use this tool? I haven't checked it for a while and i can see it has a couple of downloads, more than i expected actually. Should i update it and add new features?
Sent from my HTC One using XDA Premium 4 mobile app

Lexmazter said:
I would like some reports from MAC users, thanks!
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I would love that too..

could i get a little info on how to use this with a mac? im staring at a bunch of files without a clue what to do with them... lol id like to be able to sideload a rom through twrp since i accidentally deleted the system and dont have a rom to flash.

[Toolkit] Wug's Nexus Root Toolkit v2.1.4 [Updated 01/16/16]: Nexus 7 (2013) Thread

Unlocking, rooting, relocking and unrooting simplified! (and much more!)
VERSION 2.1.4 - This program will automatically bring together all the files you need to unlock and root your device in a few clicks, or flash it back to stock and re-lock it. You can also use this program to backup/restore all your important data, flash zips, set file permissions, push and pull files, install apps, generate logcats/bugreports, and much more! With the included file association options, you can perform tasks like flashing zips, installing apps, restoring android backup files, and flashing/booting img files with just a double click! The program includes a full featured interface for automating tasks in TWRP, enhanced restore features, an in-built auto-updater/notification system, ‘any build’ mode, advanced restore features,’NRT- Live Log’ for viewing the adb/fastboot cmds that are run in the background, quick tools utilities, and tools for taking screenshots/screen-recordings. All the latest official Android builds and Nexus devices are supported. The program intelligently and selectively downloads the files it needs for your device and makes sure you are using the latest files available. The program can even auto-detect your device and build. This release brings full Marshmallow root support plus all automated features by utilizing a new system that no longer requires modified boot.imgs. Check out the updated changelog for a more comprehensive breakdown of the feature set and changes in this release.
~ my goal for this project is make the entire process as smooth and simple as possible ~
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please read the FAQs before posting questions: http://www.wugfresh.com/nrt/faqs/
Looking for a walk-through? >> Excellent Instructional/How-To Videos: http://www.wugfresh.com/videos/
More information & Download Links: http://www.wugfresh.com/nrt/
Changelog: http://www.wugfresh.com/nrt/changelog/
Enjoy! ^_^
{{ WugFresh }}

I can't find 1.6.6 it still says "Version 1.6.6 coming soon, ETA = 07.28.2013"
Thanks.

ashik992 said:
I can't find 1.6.6 it still says "Version 1.6.6 coming soon, ETA = 07.28.2013"
Thanks.
Click to expand...
Click to collapse
Maybe try clearing browser cache. Here are some external mirrors:
Mediafire: [redacted]
Dev-host: [redacted]
Enjoy! ^_^
{{ WugFresh }}

Thx Wug! I was wondering if you were going to update the toolkit to work with flo, and BAM! Here it is! Love your work, hope you keep at it. :good:

I did not chose twrp
I use 1.66 to root my nexus 7 (2012) and I did not check the (also flash custom recovery) first pass was pushing temporary twrp, and second it flash the twrp.
Why? I get a real problem with twrp with the 4.3 update, so I did not want it in my device.
Is this a bug in the toolkit? or there is a reason why the twrp is push without asking to flash?
Still the best toolkit I ever use.

You may want to change the main body font. It's almost impossible to read on the xda app with the dark theme selected
prshosting.org

Thanks for your work. I first ran and used the "raw driver" install. Went to step 3 and ran the "check". "Success"! When installing Root & Recovery, it gets to the point where it says pushing root files to device, but when it's supposed to boot into TWRP, it boots into system "android man with red exclamation mark on his belly" mode. Tried it twice with the same result. Any ideas? I did notice that in Device Mgr "portable devices" isn't showing at all. However in Prompt mode, an "adb devices" shows device serial #. It's as if TWRP wasn't flashed correctly.

melfunn said:
Thanks for your work. I first ran and used the "raw driver" install. Went to step 3 and ran the "check". "Success"! When installing Root & Recovery, it gets to the point where it says pushing root files to device, but when it's supposed to boot into TWRP, it boots into system "android man with red exclamation mark on his belly" mode. Tried it twice with the same result. Any ideas? I did notice that in Device Mgr "portable devices" isn't showing at all. However in Prompt mode, an "adb devices" shows device serial #. It's as if TWRP wasn't flashed correctly.
Click to expand...
Click to collapse
Same issue I'm having.

Thanks for the app! Unlocking went fine, I'm hesitant to root if it's going to leave me with TWRP even if I leave that field unchecked, anyone else have the same problem as Lachaine? Or has anyone successfully gained root and maintained stock recovery with this?

funkbucket007 said:
Same issue I'm having.
Click to expand...
Click to collapse
Please try enabling this option:
Cheers.
{{ WugFresh }}

Thanks for all your hard work on this, and for sharing it with the community!! It's great having multiple options!!! I didn't use this, but just wanted to say thanks for building this and freely sharing it!!!! It's devs like you that make XDA such a great community to be a part of!!!
SwiftKey'ed from my White Sprint Note 2 using XDA Premium

WugFresh said:
Please try enabling this option:
Cheers.
{{ WugFresh }}
Click to expand...
Click to collapse
Check that option and start over with the root process?

I'm having the same problem. Made the changes in setting and no difference.

jsnietka said:
I'm having the same problem. Made the changes in setting and no difference.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
---------- Post added at 02:50 PM ---------- Previous post was at 01:53 PM ----------
k5mitch said:
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
jsnietka said:
I'm having the same problem. Made the changes in setting and no difference.
Click to expand...
Click to collapse
Third time is a charm.:good:

k5mitch said:
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
---------- Post added at 02:50 PM ---------- Previous post was at 01:53 PM ----------
Third time is a charm.:good:
Click to expand...
Click to collapse
Are you saying it finally worked?
I've done it twice same lil dead android with the red triangle.
Guess I'll try again

Unlocked, rooted and installed TWRP. No problems.
Thanks!

feron said:
Are you saying it finally worked?
I've done it twice same lil dead android with the red triangle.
Guess I'll try again
Click to expand...
Click to collapse
ODD.. third time it worked... lol

feron said:
ODD.. third time it worked... lol
Click to expand...
Click to collapse
Well after I checked the option wug suggested I closed the program and re-started it. Walah it worked.
Sent from my SAMSUNG-SGH-I317 using xda premium

k5mitch said:
Well after I checked the option wug suggested I closed the program and re-started it. Walah it worked.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Yes don't forget to restart the toolkit before trying again. Worked for me when I did. Thanks wug!

Having an issue. Stock build# is JWR66N but is not listed, so i choose the closest one, JWR66V. So far it installed the adb drivers but fails on the Full Driver Test and Checking ADB Status. The device shows up perfectly now in DM, as a Nexus7, so the drivers have a clean install. Rebooted 2-3 times already. I can go to the adb command line and its installed but not sure why the app or PC doesn't see it setup right? I cant continue to the next steps if adb is not right...lol