Hi guys.
I'm in trouble with my phone (LG P920h). I tried to install Cyanogen but it didn't work. Then, I restored to original ROM using LG Software Update and that's OK.
My cell phone is now with original GB 2.3.5, from LG. But, I have the same problem again: network is not working. I can't make calls. There's no signal.
My friend has the same cell phone. I noticed that, when I type in the dialer 3845#*920#, go to Version Info -> Factory Version, there's difference:
Mine: LGP920hAT-00-V20a-724-06-DEC-22-2011
Him: LGP920hAT-00-V20a-724-XXX-DEC-22-2011
Now I'm wodering if this 'XXX' in the version number is the problem.
I tried to install this baseband: http://forum.xda-developers.com/showthread.php?t=1668541
But, it didn't work.
I tried to restore using this guide: http://forum.xda-developers.com/showthread.php?t=1942836
But it also didn't work.
Does anyone know anything about this? Is my problem that 'XXX' in the version? If it is, how can I fix that?
Try to flash with Smart flash or LG flash tool, Bin files or KDZ file that will help you for sure.
bensmokie said:
Try to flash with Smart flash or LG flash tool, Bin files or KDZ file that will help you for sure.
Click to expand...
Click to collapse
hi bensmokie.
i've tried to use Smart Flash too. I followed this guide: http://forum.xda-developers.com/showthread.php?t=1448803, using this bin: BIN_LGP920hAT-00-V20a-724-XXX-DEC-22-2011-0.zip
It flashed. But, it still isn't working.
Look i am not proffesional in this this stuff but i have been in your place, so i know how you feel right now.
Smart flash isn't working, so try LG flash tool, there was a time when i didn't know nothing about flash i had similar problem like yours , but Lg flash tool cleared all the problems for me, Try to flash your file with LG flash tool Bin and fls, just don't give up yet. or try to flash the baseband only for your country. good luck mate.
bensmokie said:
Look i am not proffesional in this this stuff but i have been in your place, so i know how you feel right now.
Smart flash isn't working, so try LG flash tool, there was a time when i didn't know nothing about flash i had similar problem like yours , but Lg flash tool cleared all the problems for me, Try to flash your file with LG flash tool Bin and fls, just don't give up yet. or try to flash the baseband only for your country. good luck mate.
Click to expand...
Click to collapse
right. i'll try. thanks
adrianohck said:
right. i'll try. thanks
Click to expand...
Click to collapse
Adriano, you should also check if your IMEI has changed or been deleted. That sometimes happens when flashing different roms or basebands.
Check if the IMEI under your battery is the same that shows in system settings.
If they're different, use this tutorial to change it (only the restoring imei part): http://forum.xda-developers.com/showthread.php?t=1734330.
Related
Got a bit of a problem.... I flashed a ROM onto my phone (forgot to back up, that's my big issue) It said it flashed just fine. Went to start up, just ran the lg logo for about 30 mins. Decided to try re-flashing it. Made sure to wipe everything. Nothing, still have the same issue. Tried to get back into CWM, but its gone now. Tried doing emergency download software, now its stuck on the screen "Download is in progress, do not disconnect cable." Im stuck. I dont know what else to do. I've tried the LG Support Tool, but it says to use Verizon Software Upgrade Assistant, which I can't get because I can't find a download for it and I cant get it from my phone.
I have the stock ROM image, but I have no clue how to install it without CWM or something. Any suggestions? Any help would be greatly appreciated! I needs my phone...
iolpiolp8 said:
Got a bit of a problem.... I flashed a ROM onto my phone (forgot to back up, that's my big issue) It said it flashed just fine. Went to start up, just ran the lg logo for about 30 mins. Decided to try re-flashing it. Made sure to wipe everything. Nothing, still have the same issue. Tried to get back into CWM, but its gone now. Tried doing emergency download software, now its stuck on the screen "Download is in progress, do not disconnect cable." Im stuck. I dont know what else to do. I've tried the LG Support Tool, but it says to use Verizon Software Upgrade Assistant, which I can't get because I can't find a download for it and I cant get it from my phone.
I have the stock ROM image, but I have no clue how to install it without CWM or something. Any suggestions? Any help would be greatly appreciated! I needs my phone...
Click to expand...
Click to collapse
they said to use Upgrade Assistant that means you never told them about the truth: phone is not booting....big mistake or let me understand that:Upgrade Assistant works when your phone is in download mode ?!
what is that rom you tried to flash surely was for your phone ?
also you have stock rom this is a .zip file or what format?
can you enter fastboot mode ?
ruscan.calin said:
they said to use Upgrade Assistant that means you never told them about the truth: phone is not booting....big mistake or let me understand that:Upgrade Assistant works when your phone is in download mode ?!
what is that rom you tried to flash surely was for your phone ?
also you have stock rom this is a .zip file or what format?
can you enter fastboot mode ?
Click to expand...
Click to collapse
Um... Let's see... The LG Support Tool which in most cases you can use to return your phone to stock comes up with a message saying "Upgrade tool is preinstalled in your phone. Please allow to install "Verizon Wireless Software Upgrade Assistant" when the phone is being connected to the PC". That's what the tool tells me.
The ROM I tried to flash was BrokenOutConnect v1.0. Its for the LG Connect, which is almost the same phone, and some one said it would be ok to flash it.
The stock ROM is in an .img file, so I need to figure out how to install from that
And I have no idea how to enter fast boot (unless your referring to the vol up+down + pwr, in which case, that doesn't work.
Sorry, can't post the original page for the ROM, I'm too new lol
iolpiolp8 said:
Um... Let's see... The LG Support Tool which in most cases you can use to return your phone to stock comes up with a message saying "Upgrade tool is preinstalled in your phone. Please allow to install "Verizon Wireless Software Upgrade Assistant" when the phone is being connected to the PC". That's what the tool tells me.
The ROM I tried to flash was BrokenOutConnect v1.0. Its for the LG Connect, which is almost the same phone, and some one said it would be ok to flash it.
The stock ROM is in an .img file, so I need to figure out how to install from that
And I have no idea how to enter fast boot (unless your referring to the vol up+down + pwr, in which case, that doesn't work.
Sorry, can't post the original page for the ROM, I'm too new lol
Click to expand...
Click to collapse
ok
I think was a bad idea to flash that rom because is not exactly made for your phone one can damage a phone in this way never do like that !
about your stock rom...maybe this is a backup made by stock recovery ? do you have a recovery.img file in that update ? there is a single img file in that stock rom or more files ?
ruscan.calin said:
ok
I think was a bad idea to flash that rom because is not exactly made for your phone one can damage a phone in this way never do like that !
about your stock rom...maybe this is a backup made by stock recovery ? do you have a recovery.img file in that update ?
Click to expand...
Click to collapse
No I do not... I actually just found that stock image on another forum. File is called LG_Lucid_VS840_4g_system.img . I realize that was a horrible idea... Google kinda led me astray on that one lol. I just wanna figure out how to return it to stock. Or if anyone has a link for "Verizon Wireless Software Upgrade Assistant", that would be much appreciated.
iolpiolp8 said:
No I do not... I actually just found that stock image on another forum. File is called LG_Lucid_VS840_4g_system.img . I realize that was a horrible idea... Google kinda led me astray on that one lol. I just wanna figure out how to return it to stock. Or if anyone has a link for "Verizon Wireless Software Upgrade Assistant", that would be much appreciated.
Click to expand...
Click to collapse
but do you have a backup of your current rom on your sdcard ? It's made by stock recovery if so search for a file named recovery.img
here is the link to your phone check if this is really your phone also download usb drivers and software to update it from LG site
install USB drivers then download and run LG Mobile Support Tool this will connect to LG site download files and finally will request to connect phone to PC then will make update
ruscan.calin said:
but do you have a backup of your current rom on your sdcard ? It's made by stock recovery
to your phone check if this is really your phone also download usb drivers and software to update it from LG site
Click to expand...
Click to collapse
I think I got it working.... We will see in just a minute. Thank you for your help though
SUCCESS!!!!!!!!!!!!! After much trouble, it is finally recovered. Long story short, just had to update using a special tool. Thanks again for your help
iolpiolp8 said:
SUCCESS!!!!!!!!!!!!! After much trouble, it is finally recovered. Long story short, just had to update using a special tool. Thanks again for your help
Click to expand...
Click to collapse
What was the tool?
My vs840 won't allow me to flash a recovery how did you do it?
Hi, I'm new to this so pls bear me... I'm currently running Gb V20C and wanted to flash Jellybam 4.2.1. I know that after flashing it, I need to flash the baseband back to V20C in order for it to use 3G. So how do I do it exactly?
_LGFlashTool _+ lg drivers
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1958484
hope it help you
Thanks
3Dpixel said:
_LGFlashTool _+ lg drivers
http://forum.xda-developers.com/showthread.php?t=1244490
http://forum.xda-developers.com/showthread.php?t=1958484
hope it help you
Click to expand...
Click to collapse
Thanks for the reply, but I have the tools and drivers already... So to flash the baseband, I just put the .dll and .fls files only right?
yes it will faid but its oke
good lluck:]
Thanks
3Dpixel said:
yes it will faid but its oke
good lluck:]
Click to expand...
Click to collapse
Thanks bro!
I really need that modified usb cable to flash baseband? I want to change the baseband because sometimes my phone is unresponsive all i got is black screen and i think is because of the baseband.Or is not?
khrisstyan said:
I really need that modified usb cable to flash baseband? I want to change the baseband because sometimes my phone is unresponsive all i got is black screen and i think is because of the baseband.Or is not?
Click to expand...
Click to collapse
To flash baseband you need the .fls file only.
No modified cable needed. also, LG Flashtool will show "FAIL"after about 89 seconds. this is normal. Just disconnect then and reboot!
all the best.
schubeir
khrisstyan said:
I really need that modified usb cable to flash baseband? I want to change the baseband because sometimes my phone is unresponsive all i got is black screen and i think is because of the baseband.Or is not?
Click to expand...
Click to collapse
to use flash tool u neednt midified cable, only change usb port to 41
Sent from my LG-P920 using xda app-developers app
When i'm tring to install LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe i get the error from the attached pic..
khrisstyan said:
When i'm tring to install LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe i get the error from the attached pic..
Click to expand...
Click to collapse
are u using windows 8?
Sent from my LG-P920 using xda app-developers app
yes, but I ignored the message because at the end said that installed successfully.but now I reached at the step when i have to disconnect the phone and connect it again after 5 seconds but when im connecting it again I get unrecognized device message.I unplugged the phone, removed the battery, put it back and plugged it again and gets recognized but the flash tool after 7 sec give me the error that fls file path incorrect..something like that
update: i think the problem was v21f.fls file because i flashed v.18 and now the phone can't find any network...
Is this normal?
Flashed v20b still no service, tried to flash v21e..can not flash it ..help?
Update...lost my imei..
someone can please help me?I read the forums but i'm verry confused, ai flashed v18 20a 21d and others but i can not make the phone part work, v21e and v21f I could not install them.I have a stock rooted gingerbread
khrisstyan said:
someone can please help me?I read the forums but i'm verry confused, ai flashed v18 20a 21d and others but i can not make the phone part work, v21e and v21f I could not install them.I have a stock rooted gingerbread
Click to expand...
Click to collapse
Hi,
PLease try this.
http://forum.xda-developers.com/showthread.php?t=1942836
I have myself been saved many times by this link.
schubeir
Guys i am trying to flash V18a baseband only and it gives me the Invalid AP path on LG flash tool, CM10 cyanogenMod. with smart flash it work but still don't get no signal. any idea how to get the signal?
Hy. My name is Steven. Yesterday i bought an Lg L Fino d290. I rooted it with purpledrake and i installed Titanium Backup. I restored some backups from my old phone (an Chinese one : Colorovo City Tone Vision). I restored Contact storage, Phone storage and some other apps. After I rebooted the phone an error pops up "Unfortunately the process com.android.phone has stopped". I tapped on "ok" and imediately it apeared again. I pressed ok again and still apeared again and again. I freaked out and i realised what I've done.. Then i delelted all app chache and rebooted the phone. Nthing changed. I entered in stock recovery mode ( i can't install cwm on my phone) and i whiped all data and cache. I rebooted the phone and nothing changed. The error dialogue is still there. I tryed to install Titanium Backup again to see what i can do but it didn't work because the error message poped up contiously. Even if i install the app from Magazine Play or from an apk file it doesn;t work. i have adb connection but not many commands are working. for example install.. I don't know what to do.. the phone keep showing me the error with and without the sim card. I can open the phone app and the contacts but i can't open the message app. Please help me. What shoul I do? I knnow i dit something wrong.. Excuse my bad english
Hello.
I don't know exactly what the problem is, but it seems as you states, that something is corrupted. Therefor i think it's better that you try to do a full restore with the LG software and reinstalling it. Try this link: http://www.downloads.techdiscussion.in/smartphones/lg-l-fino-pc-suite-and-usb-driver/.
yes, lvg2800 bro is right. u have to flash stock rom via pc.
Don't ever restore system data from one phone to another or one rom to another. They each handle this type of stuff differently. What happened is that when you restored you phone and contact data it used a different set up and corrupted your new device setup. Your gonna have to wipe the device now and start over. Lesson learned
question
How can i restore the firmware. the lg mobile supert tool tels me that is up to date and whe i click to repair it tells me that everything is ok... please from when can i get the stock rom
fanno34 said:
How can i restore the firmware. the lg mobile supert tool tels me that is up to date and whe i click to repair it tells me that everything is ok... please from when can i get the stock rom
Click to expand...
Click to collapse
You could try wiping the data from the stuff you restored in TIBU. Or by doing a factory reset
response
zelendel said:
You could try wiping the data from the stuff you restored in TIBU. Or by doing a factory reset
Click to expand...
Click to collapse
i have made five factory reset. i can't event install titanium backup because the error message pops up... i shearched the whole internet for the firmware (
fanno34 said:
i have made five factory reset. i can't event install titanium backup because the error message pops up... i shearched the whole internet for the firmware (
Click to expand...
Click to collapse
To be honest I dont know what to tell you at this point. If a factory rest doesn't work then and you can't restore the default rom I would contact t the company you got it from.
re
ok. and what should i tell them?
fanno34 said:
ok. and what should i tell them?
Click to expand...
Click to collapse
That you need the stock software for the device.
re
zelendel said:
That you need the stock software for the device.
Click to expand...
Click to collapse
Will they give it to me? (the lg service) ? And if the will give it to me, how could I flash it? I can't even make an ADB or fastboot conection.. Thanx for helping me!
fanno34 said:
Will they give it to me? (the lg service) ? And if the will give it to me, how could I flash it? I can't even make an ADB or fastboot conection.. Thanx for helping me!
Click to expand...
Click to collapse
To be honest I dont know but it's your only shot. This device a seldom used and not developed for so it's either that or toss it.
You can try a KDZ firmware, search for LG L FINO FIRMWARE LIST on google and you will find it, download for you correct model (D290) flash it via KDZ and I hope it work...
good luck
re
lucascerqueira said:
You can try a KDZ firmware, search for LG L FINO FIRMWARE LIST on google and you will find it, download for you correct model (D290) flash it via KDZ and I hope it work...
good luck
Click to expand...
Click to collapse
thanx for helping. i have a question. i found this: http://lg-phone-firmware.com/index.php?id_mod=103 . there are some firmwares for my phone but in lg support software it tells me tha i have the D9010a software version. can i flash any of them?
fanno34 said:
thanx for helping. i have a question. i found this: http://lg-phone-firmware.com/index.php?id_mod=103 . there are some firmwares for my phone but in lg support software it tells me tha i have the D9010a software version. can i flash any of them?
Click to expand...
Click to collapse
No, download only the firmware for you model, If was D290 download the hungary version if was D295 (like mine) download CIS/CIS or another of them...
Note the number of firmware...
re
lucascerqueira said:
No, download only the firmware for you model, If was D290 download the hungary version if was D295 (like mine) download CIS/CIS or another of them...
Note the number of firmware...
Click to expand...
Click to collapse
Thank you very much for helping me. I stil have some questions. What does it mean "Note the number of firmware"? In LG Spupport Tool it tells me that is have the software D29010a and my phone is D290N. What does it mean that "10a"? On the site I gave you last time at HUN firmware version it writes "10b" not "10a" and "D290" not "D290N". Can I flash the HUN firmware or those details are important and I can't? Thank you!
fanno34 said:
Thank you very much for helping me. I stil have some questions. What does it mean "Note the number of firmware"? In LG Spupport Tool it tells me that is have the software D29010a and my phone is D290N. What does it mean that "10a"? On the site I gave you last time at HUN firmware version it writes "10b" not "10a" and "D290" not "D290N". Can I flash the HUN firmware or those details are important and I can't? Thank you!
Click to expand...
Click to collapse
10a is the version of firmware i think, no problem if you flash 10b, the only problem is that it version v10b have difficults to root, but if you don't whant do it, its perfect to you
You can flash the HUN firmware, v10b or v10c...
re
lucascerqueira said:
10a is the version of firmware i think, no problem if you flash 10b, the only problem is that it version v10b have difficults to root, but if you don't whant do it, its perfect to you
You can flash the HUN firmware, v10b or v10c...
Click to expand...
Click to collapse
I understand. So how could I flash it? I have de kdz software and the firmware but i can'make an adb connection because i can't acces the settings window. Can i use the download mode or what can i do? Thank you!
I SOLVE IT! Suddently in LG SUPPORT TOOL it apeard that i cand update from D29010A to D29010D. Thank you very much for helping. after i repaired it i noticed that sometimes when the screen is off and i press the power button the phone reacts in about 5 seconds. this only happends sometimes. what cand i do? this is not a lagg problem.
I flashed a T-Mobile Kit Kat 20g based rom on my D800 and got a lot of problems and can`t flash back to stock AT&T Kit Kat rom.The problems I`m having with the Kit Kat rom is no Play Store,no internet, and brightness don`t work.I tried tots method and that don`t work.It appears that my D800 is now a D801 with no way to return.If anybody got a fix let me know.
Also I have to reboot several times to get the usb to work to transfer files.
AtrixHDMan said:
I flashed a T-Mobile Kit Kat 20g based rom on my D800 and got a lot of problems and can`t flash back to stock AT&T Kit Kat rom.The problems I`m having with the Kit Kat rom is no Play Store,no internet, and brightness don`t work.I tried tots method and that don`t work.It appears that my D800 is now a D801 with no way to return.If anybody got a fix let me know.
Also I have to reboot several times to get the usb to work to transfer files.
Click to expand...
Click to collapse
Sounds like a mess. Have you tried this method? http://forum.xda-developers.com/showthread.php?t=2663369 If not read the whole first post and at the bottom of it there is a custom DLL you'll need instead of the DLL that comes packed with the tool. Good luck!
Really now said:
Sounds like a mess. Have you tried this method? http://forum.xda-developers.com/showthread.php?t=2663369 If not read the whole first post and at the bottom of it there is a custom DLL you'll need instead of the DLL that comes packed with the tool. Good luck!
Click to expand...
Click to collapse
I all ready tried keeps failing.My device has been converted to a D801.Also my IMEI is null and service is disabled.I can install any T-Mobile stock ROM and even ota if no custom recovery is installed but network services.
Really now said:
Sounds like a mess. Have you tried this method? http://forum.xda-developers.com/showthread.php?t=2663369 If not read the whole first post and at the bottom of it there is a custom DLL you'll need instead of the DLL that comes packed with the tool. Good luck!
Click to expand...
Click to collapse
I found a way to fix my AT&T G2 from thinking it is a T-Mobile D801 bad flash.
AtrixHDMan said:
I found a way to fix my AT&T G2 from thinking it is a T-Mobile D801 bad flash.
Click to expand...
Click to collapse
Good for you! Do you mind sharing for the record and the next person that may face the same issue? I'll bet that's a load off of your mind! :good:
Really now said:
Good for you! Do you mind sharing for the record and the next person that may face the same issue? I'll bet that's a load off of your mind! :good:
Click to expand...
Click to collapse
First make sure your rooted with twrp.Basically what I did was flashed a already stock rooted AT&T rom in twrp which I knew would brick it.That will turn it back to the correct stock ROM which in this case D800 even though the device is brick.Next get out of recovery and get the device in download mode.Then I flashed stock AT&T Kit Kat rom using tot method and the no check DLL file.May work with AT&T DLL.Didn't test.Flash it,should be successful.I will assume this method will work for others on different devices if flashed wrong rom,didn't make a backup,or however they ended up changing the device because of flashing wrong ROM.
AtrixHDMan said:
First make sure your rooted with twrp.Basically what I did was flashed a already stock rooted AT&T rom in twrp which I knew would brick it.That will turn it back to the correct stock ROM which in this case D800 even though the device is brick.Next get out of recovery and get the device in download mode.Then I flashed stock AT&T Kit Kat rom using tot method and the no check DLL file.May work with AT&T DLL.Didn't test.Flash it,should be successful.I will assume this method will work for others on different devices if flashed wrong rom,didn't make a backup,or however they ended up changing the device because of flashing wrong ROM.
Click to expand...
Click to collapse
Good for you, I'm glad that you straightened it out. :good: One last thing, you should edit the title of the thread and insert "Problem solved" or something like that. Have a good one!
Really now said:
Good for you, I'm glad that you straightened it out. :good: One last thing, you should edit the title of the thread and insert "Problem solved" or something like that. Have a good one!
Click to expand...
Click to collapse
I see when I get back on my computer.Thanks.
hi, i got my lg g3 at&t from my cousin upstate and i was trying to get some apps running on it and it most of them werent really functioning well because my playstore couldnt connect with google through mobile data and facebook app was doing the same so i decided to download the stock firmware for the phone. the phone used to start up as sprint so i download the sprint stock kitkat firmware and used lg flash tool to change it back to stock firmware. Then the network stopped working so decided to do background check and found that it was actually at&t version.
Long and short of it all is that i tried putting the stock at&t kitkat firmware on it using lg flash tool and always outputs download failed( mismatch device and firmware ). can anyone help with this.
i read on some forum that theres a universal dll that can with all versions for Lg G2 and was wondering if theres one for this one too
pls help i really need it to work
qwaiks said:
hi, i got my lg g3 at&t from my cousin upstate and i was trying to get some apps running on it and it most of them werent really functioning well because my playstore couldnt connect with google through mobile data and facebook app was doing the same so i decided to download the stock firmware for the phone. the phone used to start up as sprint so i download the sprint stock kitkat firmware and used lg flash tool to change it back to stock firmware. Then the network stopped working so decided to do background check and found that it was actually at&t version.
Long and short of it all is that i tried putting the stock at&t kitkat firmware on it using lg flash tool and always outputs download failed( mismatch device and firmware ). can anyone help with this.
i read on some forum that theres a universal dll that can with all versions for Lg G2 and was wondering if theres one for this one too
pls help i really need it to work
Click to expand...
Click to collapse
Try this - http://forum.xda-developers.com/attachment.php?attachmentid=2473543&d=1387955530
From my Guide: http://forum.xda-developers.com/showthread.php?t=2785089
If that DLL does not work for you, You may need to use a HEX editor to edit the TOT file. But try that first
hyelton said:
Try this - http://forum.xda-developers.com/attachment.php?attachmentid=2473543&d=1387955530
From my Guide: http://forum.xda-developers.com/showthread.php?t=2785089
If that DLL does not work for you, You may need to use a HEX editor to edit the TOT file. But try that first
Click to expand...
Click to collapse
thanks, i already downloaded that and tried it and still fail and i cant wrap my head round the hex editing. Was thinking of installing twrp recovery and doing a full data wipe then after i use the lg flash tool to flash the .tot file on the phone but an having problems with installing the twrp recovery cos the firmware is sprint and the phone is at&t so i dont know which one would work. Thats even if its possible
qwaiks said:
thanks, i already downloaded that and tried it and still fail and i cant wrap my head round the hex editing. Was thinking of installing twrp recovery and doing a full data wipe then after i use the lg flash tool to flash the .tot file on the phone but an having problems with installing the twrp recovery cos the firmware is sprint and the phone is at&t so i dont know which one would work. Thats even if its possible
Click to expand...
Click to collapse
Don't wipe data.. That won't help. You can root and edit build prop to D850
Sent from my iPhone using Tapatalk
hyelton said:
Don't wipe data.. That won't help. You can root and edit build prop to D850
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
okay, when i edit it in build prop, i'm supposed to go through the whole tot firmware process right?
just wanna make sure am on the right track.
qwaiks said:
okay, when i edit it in build prop, i'm supposed to go through the whole tot firmware process right?
just wanna make sure am on the right track.
Click to expand...
Click to collapse
Well that would be the only way to put it back to stock ;p
Sent from my iPhone using Tapatalk