Database Info

my phone wont open without charger

after trying to upgrade leaked gingerbread from kdz file,
it stuck in some where of upgrading, and says, pull you battery and replace etc. etc..
then I install thiaiz 1.5.2 from zip file
nowwww,
my phone wont open if I didnt conncet the charger,
it also not open when connetcted to computer via usb
so i cant do anything
help please

anyone can help?

There's no gingerbread kdz leaked. What did you try to flash??

The only "official" gb kdz file you can have tried to update to is the v20L leaked version some #@[email protected]$ tried to upload which is for 2x not for 3d. If you tried that then you likely [email protected]#@d your phone. Try an emergency restore through lg update tool...

jimakos29 said:
The only "official" gb kdz file you can have tried to update to is the v20L leaked version some #@[email protected]$ tried to upload which is for 2x not for 3d. If you tried that then you likely [email protected]#@d your phone. Try an emergency restore through lg update tool...
Click to expand...
Click to collapse
you are totaly right man,
especially " some #@[email protected]$ tried " part of your post,
emergency update solve the problem,
thanks for help

nurikarakaya said:
you are totaly right man,
especially " some #@[email protected]$ tried " part of your post,
emergency update solve the problem,
thanks for help
Click to expand...
Click to collapse
Glad I could help there...

[GUIDE] Recovering from brick/bootloop

So there have been a spate of people bricking their O3Ds lately... this is the last ditch method to recover your phone if you can't boot into Android, or CWM. No guarantees, but should work so long as your phone is still detected.
Download SmartFlash, then the corresponding packages for your phone:
---P920---
Baseband: http://d-h.st/xci
Baseband Mirror: http://goo.gl/yDnjP
Rom: http://d-h.st/WTE
Rom Mirror: http://goo.gl/UfG85
---P925---
Baseband: http://d-h.st/EBF
Baseband Mirror: http://goo.gl/mdLBn
Rom: http://d-h.st/gTO
Rom Mirror: http://goo.gl/auYkj
Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
If you downloaded the rom from my dev-host link, unzip the .bin file.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls or LGP925_CP.fls for CP bin and LGP920_AP.bin or LGP925_AP.bin for AP bin, depending on your phone model. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a working phone on v21E (P920) or v20P (P925) stock

pandaball said:
So there have been a spate of people bricking their O3Ds lately... this is the last ditch method to recover your phone if you can't boot into Android, or CWM. No guarantees, but should work so long as your phone is still detected.
Download SmartFlash, then the corresponding packages for your phone:
P920: Baseband and Rom.
P925: Baseband and Rom
Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls or LGP925_CP.fls for CP bin and LGP920_AP.bin or LGP925_AP.bin for AP bin, depending on your phone model. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a working phone on v21D (P920) or v20P (P925) stock
Click to expand...
Click to collapse
Thanks for the links! However your P925 V20P baseband link is down. Can we get a mirror?

There was this one already, I used this method countless times. It's basically the same thing, but uses LG flashing software and kdz files, which are easier to find, download and flash. You can also use the marwin one with windows enabler and the hosts file tweak (that's what I use on a win7 x64 machine). I can't get why it hasn't been stickied or something...
http://forum.xda-developers.com/showthread.php?t=1186460

sandulea said:
There was this one already, I used this method countless times. It's basically the same thing, but uses LG flashing software and kdz files, which are easier to find, download and flash. You can also use the marwin one with windows enabler and the hosts file tweak (that's what I use on a win7 x64 machine). I can't get why it hasn't been stickied or something...
http://forum.xda-developers.com/showthread.php?t=1186460
Click to expand...
Click to collapse
Yes I know of that one, however it requires you to download so many pieces of software and block LG in the hosts file. This also works on all windows based systems and does not require just XP. Furthermore, if you're phone is bricked, Marwin wont work if your phone is bricked as your phone needs to be turned on and within Android. This is the simpler method to recover your phone without too much fuss.
Sent from my LG-P920 using Tapatalk 2

Markyzz said:
Thanks for the links! However your P925 V20P baseband link is down. Can we get a mirror?
Click to expand...
Click to collapse
Sorry, will re-up when I reach home. My Dropbox has been generating excessive activity
Sent from my LG-P920 using Tapatalk 2

pandaball said:
Furthermore, if you're phone is bricked, Marwin wont work if your phone is bricked as your phone needs to be turned on and within Android. This is the simpler method to recover your phone without too much fuss.
Sent from my LG-P920 using Tapatalk 2
Click to expand...
Click to collapse
Actually it does, just last night I used Marwin to flash the phone while it was in emergency mode, download mode (as I knew it when I had the LG gt540) or whatever it's called (volume up, plugged in, detected as a modem). It's not the first time either.
As for which option is simpler, I guess I have to try smartflash, because I don't know why i had this idea that it's a complicated and unstable piece of software

hey thanks!
could you re-up the smartflash link. she's not working! much love
nor is the p925 rom.
thanks

please download link for "smartflash".... dropbox not open

advant1985 said:
please download link for "smartflash".... dropbox not open
Click to expand...
Click to collapse
Changed the link. It should work now. Stupid bandwidth limits.

i keep getting a timeout error. i've installed the drivers, using enabler, have the p925 files you posted (and put them in the right spot). keep reseting the pc. the furthest i get is about 60% and it errors. then i keep trying and it gets worse until i restart.
been trying for a couple hours now.
any help? please, as i don't have a working phone right now lol

kylereid said:
i keep getting a timeout error. i've installed the drivers, using enabler, have the p925 files you posted (and put them in the right spot). keep reseting the pc. the furthest i get is about 60% and it errors. then i keep trying and it gets worse until i restart.
been trying for a couple hours now.
any help? please, as i don't have a working phone right now lol
Click to expand...
Click to collapse
This metod never worked for me. Had the same problem. Ive heard that changing the Baud rate , speed of com port where lg is detected, helps sometimes. It didnt help me, but try and see what happens.
Sent from my LG-P920 using XDA

This is the solution
First flash de radio then flash de rom
my solution

i have a problem that i cant wright on data
i cant format data and cant make any chenge on the device and that isnt halp me... do you know somthing else i can try?

eliav076 said:
i have a problem that i cant wright on data
i cant format data and cant make any chenge on the device and that isnt halp me... do you know somthing else i can try?
Click to expand...
Click to collapse
You can't format user data or the /data partition?
In any case, try flashing CWM and see if its able to wipe the partition for you.

Wonderful, thank you! When everything else failed.... you became my new saviour. Cheers.

This doesn't work for me.
I launched getril and it tells me that the RIL is 21e, but the baseband is XMM6260 and it recommends I switch to a 21d RIL.

ofutur said:
This doesn't work for me.
I launched getril and it tells me that the RIL is 21e, but the baseband is XMM6260 and it recommends I switch to a 21d RIL.
Click to expand...
Click to collapse
Why would it recommend that you switch to an older baseband?

Not sure, but this baseband or smartflash method is not working for me. I can't connect to the mobile network.
I've tried a different rom based on 21e and got the same result.

ofutur said:
Not sure, but this baseband or smartflash method is not working for me. I can't connect to the mobile network.
I've tried a different rom based on 21e and got the same result.
Click to expand...
Click to collapse
See if you have IMEI.
Sent from my LG-P920 using XDA

No IMEI, network, phone number, signal, etc.
And I've tried 2 different SIM cards.
---------- Post added at 04:12 PM ---------- Previous post was at 03:15 PM ----------
Just flashed the bin with LGFlashTool and this time everything works as expected, so it seems that smartflash is not doing a great job. Maybe it's not catching some errors? LGFlashTool wouldn't flash the files if they were stored on the network, but smartflash never complained.
Getril still says RIL/baseband don't match, but this time the baseband shows as LGP920AT-00-V21e

[Q] I bricked my phone... need help please...

So, long story short i was successfully installed ICS from xbsall. This is the link:
http://forum.xda-developers.com/showthread.php?t=1956347
But because some bugs, i wanted to switch back to gingerbread. and i found this:
http://forum.xda-developers.com/showthread.php?t=1942836
I had downloaded all necessary files. But in step 1, it's recommended for p920 user to ready the ap file.
Well, all i do is flash cp & ap.:silly: after that, i can't boot my phone. I doesn't even show the lg logo.
please someone can help me?

Did you do the extra steps for P920 users (Rebooter) ??
Sent From My P920 (ICS ported)
Try Use THANKS Button If I Helped

Simlar thing happened to me, I had it to the point where I did have the flash screen, but now I don't get anything. It does still read and comes up as a flash device which is weird, I have a computer at work that has all the tools I need on it which I am going to try when I go back after the new years.
There was a recommendation in the thread I asked about the same thing, http://forum.xda-developers.com/showthread.php?t=2071036
try it out and let me know. The only thing I haven't tried is the fastboot method, let m eknow if this works for you!

I did it today and the fastboot method worked like a charm, let me know if you need help with this ressurection

OS_Hacking said:
Did you do the extra steps for P920 users (Rebooter) ??
Sent From My P920 (ICS ported)
Try Use THANKS Button If I Helped
Click to expand...
Click to collapse
no, all i do was download the necessary files and flash the gb rom (ap & cp).

Alibieli said:
no, all i do was download the necessary files and flash the gb rom (ap & cp).
Click to expand...
Click to collapse
Your phone can't boot without them . You MUST do that step and it's too easy .
every one flashed ICS before MUST do that step in order to downgrade into GB .
Good Luck

One thing to add, try not flashing the CP file, I think that is what bricked me the first time around.

shroomun said:
One thing to add, try not flashing the CP file, I think that is what bricked me the first time around.
Click to expand...
Click to collapse
sorry but that's the main problem. From the start i had flashed the cp file...

OS_Hacking said:
Your phone can't boot without them . You MUST do that step and it's too easy .
every one flashed ICS before MUST do that step in order to downgrade into GB .
Good Luck
Click to expand...
Click to collapse
well, i have another problem. my computer can only detect my phone for 3-4 secs. it's too fast that i can't flash anything.
any idea?

can you enter download mode (S/W Mode) without using "omap4boot" ??

Driver install omap or cosmo

3Dpixel said:
Driver install omap or cosmo
Click to expand...
Click to collapse
if i'm not wrong, you can only install omap when your phone detected (for sometimes) by a pc. But, my pc only detects my phone for only 3-4 secs.

[Q]

Hi guys.
I'm in trouble with my phone (LG P920h). I tried to install Cyanogen but it didn't work. Then, I restored to original ROM using LG Software Update and that's OK.
My cell phone is now with original GB 2.3.5, from LG. But, I have the same problem again: network is not working. I can't make calls. There's no signal.
My friend has the same cell phone. I noticed that, when I type in the dialer 3845#*920#, go to Version Info -> Factory Version, there's difference:
Mine: LGP920hAT-00-V20a-724-06-DEC-22-2011
Him: LGP920hAT-00-V20a-724-XXX-DEC-22-2011
Now I'm wodering if this 'XXX' in the version number is the problem.
I tried to install this baseband: http://forum.xda-developers.com/showthread.php?t=1668541
But, it didn't work.
I tried to restore using this guide: http://forum.xda-developers.com/showthread.php?t=1942836
But it also didn't work.
Does anyone know anything about this? Is my problem that 'XXX' in the version? If it is, how can I fix that?

Try to flash with Smart flash or LG flash tool, Bin files or KDZ file that will help you for sure.

bensmokie said:
Try to flash with Smart flash or LG flash tool, Bin files or KDZ file that will help you for sure.
Click to expand...
Click to collapse
hi bensmokie.
i've tried to use Smart Flash too. I followed this guide: http://forum.xda-developers.com/showthread.php?t=1448803, using this bin: BIN_LGP920hAT-00-V20a-724-XXX-DEC-22-2011-0.zip
It flashed. But, it still isn't working.

Look i am not proffesional in this this stuff but i have been in your place, so i know how you feel right now.
Smart flash isn't working, so try LG flash tool, there was a time when i didn't know nothing about flash i had similar problem like yours , but Lg flash tool cleared all the problems for me, Try to flash your file with LG flash tool Bin and fls, just don't give up yet. or try to flash the baseband only for your country. good luck mate.

bensmokie said:
Look i am not proffesional in this this stuff but i have been in your place, so i know how you feel right now.
Smart flash isn't working, so try LG flash tool, there was a time when i didn't know nothing about flash i had similar problem like yours , but Lg flash tool cleared all the problems for me, Try to flash your file with LG flash tool Bin and fls, just don't give up yet. or try to flash the baseband only for your country. good luck mate.
Click to expand...
Click to collapse
right. i'll try. thanks

adrianohck said:
right. i'll try. thanks
Click to expand...
Click to collapse
Adriano, you should also check if your IMEI has changed or been deleted. That sometimes happens when flashing different roms or basebands.
Check if the IMEI under your battery is the same that shows in system settings.
If they're different, use this tutorial to change it (only the restoring imei part): http://forum.xda-developers.com/showthread.php?t=1734330.

[Q] LG Optimus 3D korean version su760 ICS update file

well to keep it simple i cant access the official rom link may be country issue. so i found a 4shared link http://www.4shared.com/file/x-jB9Qd-/. so can i use this rom to keep the 3d feature and get 100% support for apps? using the upgrade method like this one. http://forum.xda-developers.com/showthread.php?t=1287236&highlight=ics?

Which phone do you have? Use maybe the official isc
Sent from my LG-SU870 using xda app-developers app

well i have the korean version and i hope the 4shared file plus the update method work for me.

MasterTobi said:
Which phone do you have? Use maybe the official isc
Sent from my LG-SU870 using xda app-developers app
Click to expand...
Click to collapse
yeah the koreans locked the link! cant access it and i have su760 version, am looking for confirmation of the link being good cause i can only access 3rd party links about the stock ics rom. i never expected LG bieng so infamous like this so can you do that or point me somewere where i can get it and a safer way to make the jump from froyo to ics wizout droping imei or network! sorry but nearly all guides are for the p version. thanks for the help!

iloveyoumommy said:
yeah the koreans locked the link! cant access it and i have su760 version, am looking for confirmation of the link being good cause i can only access 3rd party links about the stock ics rom. i never expected LG bieng so infamous like this so can you do that or point me somewere where i can get it and a safer way to make the jump from froyo to ics wizout droping imei or network! sorry but nearly all guides are for the p version. thanks for the help!
Click to expand...
Click to collapse
Use the Lg Mobile Support Tool, this have to work =)
if they will not work then i can´t understand LG, they bring the ICS andnobod can download it lol ?!
maybe test http://lg-phone-firmware.com/

MasterTobi said:
Use the Lg Mobile Support Tool, this have to work =)
if they will not work then i can´t understand LG, they bring the ICS andnobod can download it lol ?!
maybe test http://lg-phone-firmware.com/
Click to expand...
Click to collapse
the link seems to be working so i know there's a link for ics. dig that sucka's! now the flashing stuff, can i use the update method? dont mind formating but to save time and some things, downloaded the kdz_fw_upd_en file and just installed the drivers. should i do that or use lg flash tool to fresh install. do i have all the drives i need look at it on the screen shot!
am not faint hearted but bought it for 10.5 grands of my currency! THOUGH FEELS LIKE $10G! Thats why ask a lot of questions! thanks for the link and help!

iloveyoumommy said:
the link seems to be working so i know there's a link for ics. dig that sucka's! now the flashing stuff, can i use the update method? dont mind formating but to save time and some things, downloaded the kdz_fw_upd_en file and just installed the drivers. should i do that or use lg flash tool to fresh install. do i have all the drives i need look at it on the screen shot!
am not faint hearted but bought it for 10.5 grands of my currency! THOUGH FEELS LIKE $10G! Thats why ask a lot of questions! thanks for the link and help!
Click to expand...
Click to collapse
all stuff done, perfect =)
make a backup from your phone and reflash it with lg flash tool. But you have to switch the port to 41 in the Modem Device under the device manager

MasterTobi said:
Use the Lg Mobile Support Tool, this have to work =)
if they will not work then i can´t understand LG, they bring the ICS andnobod can download it lol ?!
maybe test http://lg-phone-firmware.com/
Click to expand...
Click to collapse
hey just found a trick i used against ipods. i put the ipsw in the temp folder that itunes stores the downloaded file when we simply hit restore. so in the LG i am thinking to manually download the ics v30b file and put it there, so that it instantly jump to upgrading the OS to ics. what's my odd of losing it all!?

iloveyoumommy said:
hey just found a trick i used against ipods. i put the ipsw in the temp folder that itunes stores the downloaded file when we simply hit restore. so in the LG i am thinking to manually download the ics v30b file and put it there, so that it instantly jump to upgrading the OS to ics. what's my odd of losing it all!?
Click to expand...
Click to collapse
hm i don´t updated my phone i habe only reflash it lol

am stressing out over the flashing stuff!
MasterTobi said:
hm i don´t updated my phone i habe only reflash it lol
Click to expand...
Click to collapse
Merhaba! and hey most people tend to fail to flash this stuff correctly and the worst part is losing the imei which needs 'sl-box' to fix which is way unavailable to me.
optimusrs said:
Try flash by lg flash tool
if you lose you IMEI .....
Restoring IMEI
1.Connect phone by USB
2.Activate USB debug mode
3.Enter 3845#*920# in dialer if that doesn’t work try 3845#*925# or 3845#*720# if device is SU760
4.Select Port Settings -> Select CP USB
5.A new device should appear at let it install
6.Open Tutty and select serial protocol. Click on open
7.Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
8.Type at%imei, it should display a dummy IMEI
9.Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
10. change Port Settings ->form CP USB TO AP USB
11. reboot your device
Click to expand...
Click to collapse
the number part up to 4 the phone doesnt recognize the code and let me get into what ever is the setting! does it need a better android like gb or better. if it doenst let me go there i will have to stick with the stupid froyo!
just to remind you i have installed every single latest driver and downloaded every flasher, lg flash tool, kdz offline upgrader ,smart flash , installed omap driver, successfully tried to get in s/w mode. tell me sth to relax me go on with the upgrade! am currently downloading v30b, v20f and the resurrection 10a!
[edit] yeah i needed to tick usb debugging and connect it to pc then type the code.

Happiest Day of My Life!
I just followed the Update method, and succesfully upgraded to ICS without losing anything even the wallpaper didnt change. network fine wifi fine faster boot times and cool boot animation. still testing but slower! though i got used to that with Galaxy S duos. thanks for the rom Master. well i couldnt use the notification center in vertical mode and the ics didnt cured that. well am happy! i can now install every single app i want, yippy!:laugh::laugh::laugh::laugh::laugh:

how can I upgrade my lg su760 to ics without any bricks because I try it once but after he upgrade the screen is not respond to touch. I need step by step guide please.
Sent from my TECNO Q1 using xda app-developers app

Baba130 said:
how can I upgrade my lg su760 to ics without any bricks because I try it once but after he upgrade the screen is not respond to touch. I need step by step guide please.
Sent from my TECNO Q1 using xda app-developers app
Click to expand...
Click to collapse
soon, am sorry but am kinda busy. i will list every thing i did!

How did I DID IT!
well at first the lg mobile support tool couldnt recognize my phone, may be because i live in 'unknown' country. so i manually downloaded every driver known to be made for this phone and installed them. when i opened the tool again it recognized it and told me i have to update the drivers i did. so i had the latest drivers for the phone. i downloaded the 'offline installer download' link from the xda link i posted earlier and downloaded v30b from the link i got from MasterTobi. i ticked USB Debugging and connected to pc, then i started the vbs script it did all the modifications i needed then i followed the instruction then viola! android upgraded. i was shocked when the phone lit up on 90% but completed with no errors. B)

SU760, V30B. how to root this official ICS..
SU760, V30B. how to root this official ICS..
i have installed SU760, V30B. how to root this official ICS?
i need step guide plzzz...

Faseh said:
SU760, V30B. how to root this official ICS..
i have installed SU760, V30B. how to root this official ICS?
i need step guide plzzz...
Click to expand...
Click to collapse
Check This

Hi all first i had GB 2.3 prometheus running but apps on my SU760 were not working well probably because prometheus is P920 port.
So i used LG smart flash tool and flashed froyo 2.2 V10 and then upgraded to 2.3.5 GB using LG support tool all is good until now.
Wait !!!!!
-------------
So now i try to upgrade to ICS using LG support tool my phone is detected by the tool but all of a sudden i get a pop up phone not connected properly, so i run LG support tool as SP3 and run as administrator, still no luck !!!
I then extracted V30b KDZ which is ICS 4.0.4 to bin and fls and used LG smart flash tool to flash directly with ICS but the download mode keeps on dropping out hence i cannot flash the SU760 all the wat to 100% with ICS.
I have now been trying to get ICS on my phone for last 48 hours but no luck.
My Question is:-
1) Is it really worth upgrading SU760 to ICS because i had ICS earlier this year and my phone started to crawl and really slow.
2)Is there a way to get ICS on my phone apart from LG support tool and LG smart flasher and offline flashing is not working for me.
3)Even if i do manage to get ICS then is the ICS rom 4.0.4 by xbsall http://forum.xda-developers.com/showthread.php?t=1963847 ported from experia fast enough on SU760 ?
Thanks in advance,
Suhail