[Q] My pOwer button :( - HTC Pico (Explorer)

I am currently on cm10b#3 and when I lock my phone it starts and when I long press power button to reboot it does not work like it used to before...hope u people understand my problem. I would be really thankful to the person who will help me!!

Do you mean that your power button is actually working for powering on but doesn't work when phone is ON/Doesn't bring power Manu on holding?
Is this the problem with this specific ROM?
Did you clean install?
Wipe every thing and flash again.
Sent from my HTC Explorer A310e using xda premium

its not a rom problem its a hardware problem..!! take or device to Service center...theyl repair it ..!!then everything will be oky!!:angel:
other than a maunal fix is comming Soon:fingers-crossed:

Explaination needed..
pknagi said:
I am currently on cm10b#3 and when I lock my phone it starts and when I long press power button to reboot it does not work like it used to before...hope u people understand my problem. I would be really thankful to the person who will help me!!
Click to expand...
Click to collapse
Please explain in more detail what is happening...step by step..

Listen...when i press the power button the screen goes on again and goes off again...this does not always happen but most of the time..secondly when i long press the power button to open power menu.the power menu shows up but when I release the button the screeen goes off!!!

Sounds like it's a hardware problem...
You have to go to the service center for this...
By the way.. Did you try to flash different roms..
Sent from my HTC Explorer A310e using xda app-developers app

its a hardware problem...you can see this thread http://forum.xda-developers.com/showthread.php?t=1927192
I too facing the same problem..but after installing MiniCM9-3.0.5 Build1..the problem almost gone for me..i think so...
Just check it..

akshay4 said:
its not a rom problem its a hardware problem..!! take or device to Service center...theyl repair it ..!!then everything will be oky!!:angel:
other than a maunal fix is comming Soon:fingers-crossed:
Click to expand...
Click to collapse
Any idea abt that guide by bhargav ?
How many more couple of days are left?
Sent from my HTC Explorer A310e using xda premium

Related

[Q] Bricked???

How can you see if your phone is bricked???
Is there maybe a way to unbrick it then???
THX 4 helping
Can you build a wall with it? If yes then it is a brick.
How about you searched before opening a new thread?
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
cryptstyling said:
How can you see if your phone is bricked???
Is there maybe a way to unbrick it then???
THX 4 helping
Click to expand...
Click to collapse
We are not clairvoyent - more info please.
cryptstyling said:
How can you see if your phone is bricked???
Is there maybe a way to unbrick it then???
THX 4 helping
Click to expand...
Click to collapse
1. Does it turn on, at all, no matter what you do? No? Bricked.
2. No, true bricks cannot be fixed. The good news, most bricks aren't bricks, they're "bricks". As in, super easy to fix.
The phone turns on. After the HTC logo the screen stays white.
Is stil can get in the bootloader and recovery.
I tried to restore a previous back-up but the screen stays white.
dexter93 said:
Can you build a wall with it? If yes then it is a brick.
How about you searched before opening a new thread?
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
Click to expand...
Click to collapse
Nice comment. took a while to think about that???
Seriously, there is no search button right now so that i can't search for a related thread.
Don't comment if you ain't saying something usefull.
Sounds like you can flash a rom. Your not bricked.
Sent from my MB855 using xda premium
cryptstyling said:
The phone turns on. After the HTC logo the screen stays white.
Is stil can get in the bootloader and recovery.
I tried to restore a previous back-up but the screen stays white.
Click to expand...
Click to collapse
Just to let you know if you are able to get into bootloader then is not bricked.
Bricks are only if the phone cannot power on. No signs of anything, then it's a bricked.
Yours is not a bricked
Sent from my HTC Sensation 4G using XDA App
rbeavers said:
Sounds like you can flash a rom. Your not bricked.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
I flashed a lot of roms so i know how all of this works here.
But when i try to update my cousins phone this happens.
Is the first time that i ever see something of this.
--------------------------------------------------------
After an hour staying on the white screen the phone started all sudenly.
Now everything works like a charme again.
Guess that there was some kind or bug or something.
Place this in your ad card root http://db.tt/ht4BPIS8 that's a cwm recovery.
After that power off your phone, take out the battery and then re insert it.
Once you do that, hold down the down vol key then hold down the power button.
You will get to the bootloader
Select recovery
Restore your Nandroid or flash ROM
Sorry for the un organize post but I'm writing on my phone.
Let me know how that goes
Sent from my HTC Sensation 4G using XDA App
cryptstyling said:
I flashed a lot of roms so i know how all of this works here.
But when i try to update my cousins phone this happens.
Is the first time that i ever see something of this.
--------------------------------------------------------
After an hour staying on the white screen the phone started all sudenly.
Now everything works like a charme again.
Guess that there was some kind or bug or something.
Click to expand...
Click to collapse
Oh nice
Sent from my HTC Sensation 4G using XDA App
cryptstyling said:
Nice comment. took a while to think about that???
Seriously, there is no search button right now so that i can't search for a related thread.
Don't comment if you ain't saying something usefull.
Click to expand...
Click to collapse
You opened a thread asking for help without explaining what's wrong. Also the sticky threads have all the info you need. There is a thread called "help" for such questions. You are not bricked, you are in a bootloop, flashing a rom will fix it.
I don't see the reason why you should had opened a thread. The same answer has been answered about a hundred times by now. Look at the top of your browsers window.. there is the SEARCH field. Use it next time
Damn. I accidentally thanked that post
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk

Power/lock button not working!

Hey guys as the topic says my lock button ain't responding!..
All was fine until today my phone suddenly hanged and I took off my battery to restart the phone but tit turned on on its own without pressing the power button !..and now when I try to lock the device or turn it off it ain't working!:
I am thinking is it the ROM issue (I'm using official cm7) or hardware issue(key is broken)...
Please help!
Sent from my GT-S5670 using Tapatalk 2
Go with it at a service...oh but if the power button don't work you can't go to download mode...but try with an app from market maybe it will work.
Sent from my GT-S5670 using xda app-developers app
A Guy in my neighborhood runs a repair shop and I took my fit to him!..he said that its not a hardware fault but indeed it's a software defect!..He said that in such a case mostly 80% it is a software defect! ..
So I was planning to flash a stock ROM can anyone provide me with the link of latest Indian Firmware for Galaxy Fit?..(along with a small procedure,if possible) ...
Thanx guys!..
Sent from my GT-S5670 using Tapatalk 2
Should I go for 4 files firmware or .tar?
Sent from my GT-S5670 using Tapatalk 2
It's not an Official CM7 prob. But, since, it seems nothing except repairing ur phone... you should give it a try. Try to flash both stock firmwares one by one, and see whether it's back to normal.It doesn't matter which one u flash first. Flash either four pkg firmware or one pkg.(depends on U).:thumbup::thumbup::thumbup:
Sent Via XDA™ Premium
neil.richard said:
Should I go for 4 files firmware or .tar?
Sent from my GT-S5670 using Tapatalk 2
Click to expand...
Click to collapse
Download stock ROM from here:
http://www.sammobile.com/firmware/
In Search write s5670 and you now have ROMs for download.
After download ROM.zip, extract it.
You now have MD5 File. Flash this 4 MD5 File with ODIN.
This is an example:
Galaxy_Rohit said:
It's not an Official CM7 prob. But, since, it seems nothing except repairing ur phone... you should give it a try. Try to flash both stock firmwares one by one, and see whether it's back to normal.It doesn't matter which one u flash first. Flash either four pkg firmware or one pkg.(depends on U).:thumbup::thumbup::thumbup:
Sent Via XDA™ Premium
Click to expand...
Click to collapse
ya……i also feel the same!..will try asap!
Sent from my GT-S5670 using Tapatalk 2
same problem.....
hey bro i am facing same power button problem....is there any solution for it that we can do manually......???????????????????????????????/
plz plz reply me as soon as possible.......thnk u so much
ANY SOLn YET ??
Any one , know how to get it right ?
Might not be the ROMs fault as I have been using official CM for more than an year
Sent from my Nexus 5 using Tapatalk
Power button issue
Hey admin I have this strange issue with my fit !
Whenever I charge my phone with a different charger of the same specs or if i overcharge my phone the power button responds like its a touchscreen button or so !
I do not need to press the button !
Even if I roll a finger over it it would lock or unlock n may switch off or reboot at random !
Plz solve this thing !
Note: already tryd numerous ROMs !
currently on MII v4 !
Hey i facing the same problem here.
my power button has been broken for a year.
But when i go to service centre, they said they must change all of sparepart. because the thing that broke is the main machine.
I dont know they're trying to trick me or not
i had same problem earlier but not now..
There was a time when my Galaxy fit device started acting weirdly like trunng off automatically, frequent hangs, etc. But i was okay with all those things till my power off button suddenly stopped working at all. Although i still was able to go to safe mode and recovery mode but it wasn't working during normal operations. Till than i was usuing the old FORYO 2.2 version of android. I thought maybe upgrading to Gingerbread can solve the problem. So i tried upgrading my device through Samsung kies. Unfortunately due to slow internet or some other issue i wasn't able to upgrade my device.
Than i finally upgraded my device manually through Odin. All my hopes were dashed when i noticed that my power off button was still not working. Than i flashed various roms like Jana Rom and finally i'm using stock rom.
After using this rom for about 1.5 years one day i suddenly noticed that my power off button started working miraculously. One of my friend who also use Galaxy fit had same problem but his power off problem was automatically fixed quite earlier than me. So i guess it would be best if you wait long enough and hope that the power off button would one day started working again.

Vibration stopped on hTC explorer..

Hi...
My phone's vibration is not working at all...
I am rooted and installed NExtGen v1.5 ROM with yannou's Kernel...
It was running nicely for 5-6 days...
What i did and my observations-
1.) I tried reflashing the rom but nothing happened...
2.) I can hear a very very low tik-tik sound on the phone when it seems to vibrate but it doesn't vibrate...
3.) I gave it a slight smack on the hand and it started vibrating for sometime and then again it stopped
4.) I searched all forums and threads but found nothing for explorer on this topic..
My Questions-
1.) Is this a issue with the phone's vibrator motor.?
2.) Please help to get this fixed....
Thanks in advanced...
artistaditya said:
Hi...
My phone's vibration is not working at all...
I am rooted and installed NExtGen v1.5 ROM with yannou's Kernel...
It was running nicely for 5-6 days...
What i did and my observations-
1.) I tried reflashing the rom but nothing happened...
2.) I can hear a very very low tik-tik sound on the phone when it seems to vibrate but it doesn't vibrate...
3.) I gave it a slight smack on the hand and it started vibrating for sometime and then again it stopped
4.) I searched all forums and threads but found nothing for explorer on this topic..
My Questions-
1.) Is this a issue with the phone's vibrator motor.?
2.) Please help to get this fixed....
Thanks in advanced...
Click to expand...
Click to collapse
flash stock rom.. and check whether ua gettitng this problem or not.. may some files get corrupted.
hit that hell if helped.
shree alwaz said:
flash stock rom.. and check whether ua gettitng this problem or not.. may some files get corrupted.
hit that hell if helped.
Click to expand...
Click to collapse
Thanks.,
I will try it..
It really sounds like a hardware issue, I mean if something gets fixed by smacking it........ Give a try by using stock rom, (as shree alwaz sayed before me) but I have my doubts.
Working now..
shortyoko said:
It really sounds like a hardware issue, I mean if something gets fixed by smacking it........ Give a try by using stock rom, (as shree alwaz sayed before me) but I have my doubts.
Click to expand...
Click to collapse
Yeah i also think the same...
It started vibrating before flashing the stock rom after a slight smack on the hand and is working till now
I flashed the stock rom and then also it worked...
Then i restored the nandroid backup of NextGen made today before flashing stock rom..
It is vibrating fine but sometimes the vibrations intensity get high and low [you understand what i mean]
I am worried there is a hardware problem...
I also saw a tutorial for htc trinity here.... http://forum.xda-developers.com/showthread.php?t=376035
Do i have to do this...?
artistaditya said:
Yeah i also think the same...
It started vibrating before flashing the stock rom after a slight smack on the hand and is working till now
I flashed the stock rom and then also it worked...
Then i restored the nandroid backup of NextGen made today before flashing stock rom..
It is vibrating fine but sometimes the vibrations intensity get high and low [you understand what i mean]
I am worried there is a hardware problem...
I also saw a tutorial for htc trinity here.... http://forum.xda-developers.com/showthread.php?t=376035
Do i have to do this...?
Click to expand...
Click to collapse
Yea.make a trail there is no wrong in dat.but make sure dat is not screwing fone
Typing in swift key3 from tiny explorer with ICS
I am not going to try it till the vibration fully stops again...
I also don't have the size of that screw driver.. ... And also don't know if the vibration motor is located at the same place as in htc trinity ...
Please tell me if you can where it is located ....
Is it the same place as in the trinity ...?
Sent from my HTC Explorer A310e using xda app-developers app
http://www.youtube.com/watch?v=cFtdxiX6YSM Check out this video, I know it's not in English, but it's the best I can find, also I think you can understand what is where. Here is with words what it sayed in the guide
HTC Explorer Take Apart Instructions:
1) Turn off the phone. Remove the back, battery, SIM Card.
2) Using a Torx T6 screwdriver undo the screwdrivers in the corners of the phone. Do note, that on some models of this phone there will be stickers or a housing covering the screws. Removing this voids the warranty, so be sure on this point. For the majority of people the phone will be outside of the warranty period for now.
3) Using the case tool, work a little gap on the front of the phone. This will provide a small gap which you can run around to remove the front face.
4) The keypad is connected via ribbon assembly to the main front face, so this needs to be removed for complete separation.
5) The LCD needs to be removed from the other side of the board. The frame needs to be removed from the chassis of the phone, which can be levered using the case tool. This is clipped in with no screws.
6) The LCD ribbon cable can then be removed and the LCD panel removed and replaced.
7) Reassembly is a reverse of these steps. Make sure you’ve kept all the parts safe.
Click to expand...
Click to collapse
Thank you very much shortyoko...
I will give it a try and post the results here...
Sent from my HTC Explorer A310e using xda app-developers app
Ok..
So it has been like a month now and I am facing no problems with vibration..
It worked then by smacking on the palm and still it's working...
So thanks for the support guys...
Sent from my HTC Explorer A310e using xda app-developers app
It was a hardware error something Must have gotten loose forget it
Sent from my HTC Explorer A310e using xda app-developers app
DanceOff said:
It was a hardware error something Must have gotten loose forget it
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
THought to inform all just in case anyone was waiting for the reply....
I too forgot it by the way....
artistaditya said:
Hi...
My phone's vibration is not working at all...
I am rooted and installed NExtGen v1.5 ROM with yannou's Kernel...
It was running nicely for 5-6 days...
What i did and my observations-
1.) I tried reflashing the rom but nothing happened...
2.) I can hear a very very low tik-tik sound on the phone when it seems to vibrate but it doesn't vibrate...
3.) I gave it a slight smack on the hand and it started vibrating for sometime and then again it stopped
4.) I searched all forums and threads but found nothing for explorer on this topic..
My Questions-
1.) Is this a issue with the phone's vibrator motor.?
2.) Please help to get this fixed....
Thanks in advanced...
Click to expand...
Click to collapse
Best idea is to download zdevice test app from play store and check whether vibrate works or not
Sent from my HTC Explorer A310e using Tapatalk 2
I tried this app just now and it says that the vibrator works..
Sent from my HTC Explorer A310e using xda app-developers app

[Q] Cant remap keys on Jelly Bean 4.1.1

hello O1 people XD. i need help with something that i need to do with my phone 'cause power button is almost broken.
in every rom that i installed in my O1, i remapp the search key as power button. even in ICS i made this change without any problem but i don't know if JB is diferent.
when i try to remap the search key by editing qwerty.kl and/or thunder_keypad.kl, then it looks like it comes unaccesible. so when a restart the phone, all buttons losses their keymaps. i can not do almost anything. I try button remapper apk but it just recognizes power key and headsethook key only.
i made a logcat and there's a message that always repeat: "W/SocketClient( 98): write error (Broken pipe)"
so my question is: do anyone try successfully to remap keys on jellybean? what should i do?
thanks guys...
Check my sig, it works in every roms
Sent from my LG-P500 using xda premium
FPChaim said:
Check my sig, it works in every roms
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Thanks!!!!! it really works... :laugh: :laugh: :laugh: :laugh: :laugh:

[Q] Broken power button

My power button just stopped working for no reason. one day it started to act weird and work very weak and another day it stopped working totally. I seen a video of screen replacement where the person opened the phone and you could see motherboard. I was thinking maybe somehow the wiring got loose but when I looked at the video there was no wire going to power button, What could make it not work? how can I fix it? Thank you
Is there way to bootup phone without power button?
Yes, with latest wkpark bootloaders and with custom kernel. Remove battery and put it back. The phone will start automatically.
Then you can flash kernel from v28b leaked rom. You turn on the screen by pressing volume down button.
Sent from my LG-P920 using XDA Premium 4 mobile app
I have latest wkparks bootloader but phone does not bootup after inserting battery I tried many times before. if connect phone to pc while it's turned off it goes to fastboot . I tried all different combinations of inserting battery and plugging the chaeger but neither works
Sent from my LG-P920 using xda app-developers app
krija said:
Yes, with latest wkpark bootloaders and with custom kernel. Remove battery and put it back. The phone will start automatically.
Then you can flash kernel from v28b leaked rom. You turn on the screen by pressing volume down button.
Sent from my LG-P920 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am using GPCR 2.1 with shazo kernel + wkparks bootloader. phone doesnt boot up after inserting battery
niko22225 said:
I am using GPCR 2.1 with shazo kernel + wkparks bootloader. phone doesnt boot up after inserting battery
Click to expand...
Click to collapse
hmm try diffrent kernel my phone always boot up after inserting battery
Is there a custom kernel for cm 10? :S
Sent from my LG-P920 using XDA Premium 4 mobile app
niko22225 said:
Is there a custom kernel for cm 10? :S
Sent from my LG-P920 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
iodiak kernel for cm10 if not help then you need flash ics with flashtool
michalsk11 said:
iodiak kernel for cm10 if not help then you need flash ics with flashtool
Click to expand...
Click to collapse
I could flash it also through recovery lol. But I really would like to keep it. For now Im booting up phone with os hacking tool through USB what means I can only do so only at home. For now I try battery to not die . Also cm10 has a volume rocker wake option which unfornately stops working when cpu goes to deepsleep so I always must plug headphones in and out so headphone jack is probably next thing Im going to break. Thanks for the tip I will try iodaks kernel .
Sent from my LG-P920 using XDA Premium 4 mobile app
niko22225 said:
I could flash it also through recovery lol. But I really would like to keep it. For now Im booting up phone with os hacking tool through USB what means I can only do so only at home. For now I try battery to not die . Also cm10 has a volume rocker wake option which unfornately stops working when cpu goes to deepsleep so I always must plug headphones in and out so headphone jack is probably next thing Im going to break. Thanks for the tip I will try iodaks kernel .
Sent from my LG-P920 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
remap your power button to 3d button , for example i change volume down to 3d button for playing emulators like ppsspp
michalsk11 said:
remap your power button to 3d button , for example i change volume down to 3d button for playing emulators like ppsspp
Click to expand...
Click to collapse
Sounds good but how can I do that? also if I ever choose to go back to ICS can I safely remap it back as it was before? and could you please send me link for iodaks kernel? i was searching all his threads but I couldnt find it
niko22225 said:
Sounds good but how can I do that? also if I ever choose to go back to ICS can I safely remap it back as it was before? and could you please send me link for iodaks kernel? i was searching all his threads but I couldnt find it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2069166 Here is the link . You can also use in the worst case, the proximity screen off app on Play Store. Its one of the temporary solutions. https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoff&hl=en
Thanks for the link ) May I ask how long it should averagely take to bootup after inserting battery? After flashing kernel , my phone booted up when I inserted battery but sometimes it doesnt. I will be sure after some days of use. For now thank all of you for tips and help
Sent from my LG-P920 using XDA Premium 4 mobile app
niko22225 said:
Sounds good but how can I do that? also if I ever choose to go back to ICS can I safely remap it back as it was before? and could you please send me link for iodaks kernel? i was searching all his threads but I couldnt find it
Click to expand...
Click to collapse
system/usr/keylayout try too change in generic.kl in this folder i will try to remap power button with my phone and post it.
michalsk11 said:
system/usr/keylayout try too change in generic.kl in this folder i will try to remap power button with my phone and post it.
Click to expand...
Click to collapse
You don't need to if you don't want to. I found an solution . Thank you for tips
Sent from my LG-P925 using XDA Premium 4 mobile app

Categories

Resources