well ... the phone is not mine but a friend so no good cause or as a term that way but I want to help her so that's why I am writing to you to see if there is any kind soul who can help me to help :laugh:
the phone does not exceed samsung lyrics, lyrics goes to black screen samsung infinitely, I put the battery only begins with its infinite loop and does not boot, below pictures to see how it looks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if I try to put it in download mode it gives me this (see picture) and odin does not recognize ...
download a 2.3.6 firmware and odin kies and I have installed on the PC, the thing is that I can go from there, if anyone can tell me if I am going wrong in download mode ... or is that really the phone that became a brick and not worth doing anything ... well I hope your comments
This is the model of the phone for what it's worth.
sorry for my English, is the translator of google
Take battery out, hold both volume buttons, put battery in, plug USB cable in
Sent from my SGH-I997 using xda app-developers app
Wakka_Tulkas_Mogue said:
well ... the phone is not mine but a friend so no good cause or as a term that way but I want to help her so that's why I am writing to you to see if there is any kind soul who can help me to help :laugh:
the phone does not exceed samsung lyrics, lyrics goes to black screen samsung infinitely, I put the battery only begins with its infinite loop and does not boot, below pictures to see how it looks.
if I try to put it in download mode it gives me this (see picture) and odin does not recognize ...
download a 2.3.6 firmware and odin kies and I have installed on the PC, the thing is that I can go from there, if anyone can tell me if I am going wrong in download mode ... or is that really the phone that became a brick and not worth doing anything ... well I hope your comments
This is the model of the phone for what it's worth.
sorry for my English, is the translator of google
Click to expand...
Click to collapse
Seems like stuck power button
Okay if it's not stuck power button , Below trick may solve ur problem
1 Go to full stock using heimdal one click, After completetion, U may stuck in bootloop as you said
2 Flash efs.zip found in the link below using odin. put efs.zip in odin and untouch any other setting and flash, (Ur imei may be previously corrupted so u got bootloop). This doesnot do any harm. So flash with confidence. If ur device doesnot show up in odin after u flash with heimdal one click , reinstal drivers with kies mini
Link for download http://forum.xda-developers.com/show....php?t=1729838
3 Now u'll be out of bootloop if ur imei was previously corrupted.
Do as I said stepwise
I was in similar situation. And this solved my problem.
Hit me thanks if I helped you :good:
amritn said:
Seems like stuck power button
Okay if it's not stuck power button , Below trick may solve ur problem
1 Go to full stock using heimdal one click, After completetion, U may stuck in bootloop as you said
2 Flash efs.zip found in the link below using odin. put efs.zip in odin and untouch any other setting and flash, (Ur imei may be previously corrupted so u got bootloop). This doesnot do any harm. So flash with confidence. If ur device doesnot show up in odin after u flash with heimdal one click , reinstal drivers with kies mini
Link for download http://forum.xda-developers.com/show....php?t=1729838
3 Now u'll be out of bootloop if ur imei was previously corrupted.
Do as I said stepwise
I was in similar situation. And this solved my problem.
Hit me thanks if I helped you :good:
Click to expand...
Click to collapse
I will do what I say ... just that I can not go to the link you put, so could you please put back?
but ... now that you mention it .... Power Button when I put the battery automatically turns on and gets stuck in the samsung logo and black screen as in the above pictures ... will you tell me that the power button is stuck? if that's the case ... I fix it?
sorry for my bad English, is the translator of google
Yes, you have a faulty power button. Buy a new one, I guess
Sent from my SGH-I997 using xda app-developers app
magnetboard said:
Yes, you have a faulty power button. Buy a new one, I guess
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Take out the battery for 1 minute and put the battery inside , if again it automatically starts then may be ur power button is stuck;
U need to disassembly according to http://www.youtube.com/watch?v=ewdyo2fkJj8 video
and press the power button from inside after u open the nod
And if ur power button is not stuck ie after u open ur battery and put after 1 min and if doesnot starts automatically,
do the step I mentioned above
For efs download below.
If the process doesnot work let me know
I have next option for you. But do the step i mentioned above step by step.
Hit me thanks if I helped you.:good:
amritn said:
Take out the battery for 1 minute and put the battery inside , if again it automatically starts then may be ur power button is stuck;
U need to disassembly according to http://www.youtube.com/watch?v=ewdyo2fkJj8 video
and press the power button from inside after u open the nod
And if ur power button is not stuck ie after u open ur battery and put after 1 min and if doesnot starts automatically,
do the step I mentioned above
For efs download below.
If the process doesnot work let me know
I have next option for you. But do the step i mentioned above step by step.
Hit me thanks if I helped you.:good:
Click to expand...
Click to collapse
excellent! and if the power button is stuck and let him yesterday when I left work without the battery and when you return in the morning and went back to get quickly rekindled, when you get home you have to hand screwdrivers do, many thank you! then comment as I was :good:
Two things can be wrong here. Power button or bad USB port. I replaced my power button that fixed only part of the problem. Can be imei problem. I'd put it into download mode flash back to stock. If problem persist you can rule out software n proceed to hardware. A way to test the power button is if you were able to boot into recovery.
One way to get it to boot up IF IF IF its not a power button problem
Slide out battery..... Slide battery back in ... right after you put the battery in plug in your USB charging cable(you have to do it pretty quick).... You should get a green recharging battery logo.... While this logo is up continuously press the power button...
Sometimes its just a bad/faulty or dirty USB port. Its a bit difficult to solder a new button thats that's why its best to make sure its the button. I'm talking from experience. you can clean the button.. I read some thread where people would just drop the phone purposely to get the button unstuck.
If not don't worry power button are pretty cheap on eBay as well as ports.
SMiGGs said:
Two things can be wrong here. Power button or bad USB port. I replaced my power button that fixed only part of the problem. Can be imei problem. I'd put it into download mode flash back to stock. If problem persist you can rule out software n proceed to hardware. A way to test the power button is if you were able to boot into recovery.
One way to get it to boot up IF IF IF its not a power button problem
Slide out battery..... Slide battery back in ... right after you put the battery in plug in your USB charging cable(you have to do it pretty quick).... You should get a green recharging battery logo.... While this logo is up continuously press the power button...
Sometimes its just a bad/faulty or dirty USB port. Its a bit difficult to solder a new button thats that's why its best to make sure its the button. I'm talking from experience. you can clean the button.. I read some thread where people would just drop the phone purposely to get the button unstuck.
If not don't worry power button are pretty cheap on eBay as well as ports.
Click to expand...
Click to collapse
well ... Yesterday I opened the phone according to the video tutorial that I spend @amritn as seen in the image.
but when I do what you tell me to put the battery and place the USB cable quickly becomes thus passes this black screen, and press the power button nothing happens.
So if I saw this other tutorial yesterday and when I opened the phone yesterday I did the last step, I opened it and review only the shell of the phone does not have the button stuck and do not touch the equipment itself, not if I have to prove with doing what it says here in whole or proceed to restore the imei .... I say?
sorry for my bad English that comes thanks to google translator
reviewing found this video out there that is exactly what happens to the phone I have, just that I have that piece that put the end of the video that makes it ends in download mode
http://www.youtube.com/watch?v=AdSusfiSjqI
then ... that means the problem is if the power button?
Wakka_Tulkas_Mogue said:
reviewing found this video out there that is exactly what happens to the phone I have, just that I have that piece that put the end of the video that makes it ends in download mode
http://www.youtube.com/watch?v=AdSusfiSjqI
then ... that means the problem is if the power button?
Click to expand...
Click to collapse
If that exactly the same things happen in video, Then i'm afraid to say it's power button failure.
Or if u can go normally to download mode using volume up+ volume down and inserting usb cable when the phone is power of
go to my second process from heimdal one click and restoring efs. This may solve your problem if it's software related.
Hit me thanks if I helped you:good:
Related
Hello
I downloaded the [ROM-ODIN]T959VUVKB5 Stock + Root
but it will not re-install all the Bloatware on my phone
I want to try the [ROM-ODIN] Deodexed KB5 Enhanced v1.5 rom now
However, I just can't enter Download Mode anymore
If I press Volume Up + Volume Down + HOME + Power button, I can enter the recovery mode or whatever it's called
If I press Volume Down + Home Button + Power Button the phone boots normally
I do remember accessing Download Mode before, when I install the Stock + Root ROM
At this point I'm so frustrated I am just going to return the phone to the store and cancel the whole T-Mobile contract
Samsung Galaxy S 4G was supposedly the BEST OF THE BEST but with 200MB out of stock I just can't use this phone too much, since a few apps use 20MB per app (Google Earth, Adobe Air...)
Anyway, I want to reinstall all the Bloatware, so I'd appreciate if someone can tell me how to restore this phone to factory settings, with all the bloatware and all that crap
I appreciate your responses
pop the bat out, remove the sim. put bat back on.
Vol UP+DOWN+PLUG IN USB
rafarataneneces said:
Hello
I downloaded the [ROM-ODIN]T959VUVKB5 Stock + Root
but it will not re-install all the Bloatware on my phone
I want to try the [ROM-ODIN] Deodexed KB5 Enhanced v1.5 rom now
However, I just can't enter Download Mode anymore
If I press Volume Up + Volume Down + HOME + Power button, I can enter the recovery mode or whatever it's called
If I press Volume Down + Home Button + Power Button the phone boots normally
I do remember accessing Download Mode before, when I install the Stock + Root ROM
At this point I'm so frustrated I am just going to return the phone to the store and cancel the whole T-Mobile contract
Samsung Galaxy S 4G was supposedly the BEST OF THE BEST but with 200MB out of stock I just can't use this phone too much, since a few apps use 20MB per app (Google Earth, Adobe Air...)
Anyway, I want to reinstall all the Bloatware, so I'd appreciate if someone can tell me how to restore this phone to factory settings, with all the bloatware and all that crap
I appreciate your responses
Click to expand...
Click to collapse
Shut down your phone. pull the battery out. connect your tether cable to the phone and USB to computer. start oden, put tar file in PDA box. don't change any other settings. Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode, click on Start on oden. As for the bloatware, you are going to get whatever apps that are in the tar file. I think Some of the bloat has been removed. Not sure what, but it seems most of it is still there. I think DriveSmart is gone
nwpro3 said:
Shut down your phone. pull the battery out. connect your tether cable to the phone and USB to computer. start oden, put tar file in PDA box. don't change any other settings. Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode, click on Start on oden. As for the bloatware, you are going to get whatever apps that are in the tar file. I think Some of the bloat has been removed. Not sure what, but it seems most of it is still there. I think DriveSmart is gone
Click to expand...
Click to collapse
THANK YOU BROTHER
I was 20 minutes away from going to T-Mobile
Ok, so why is this procedure different from other procedures?
To recap
1) Shut down your phone
2) Start ODIN and select TAR file
3) Press Volume Up/Volume UP simultaneously
4) Insert battery
5) Click Start in Odin
Now my question, in Step 3, after I press Volume Up/Volume Down, and I insert the battery, should I press the power button or not?
I appreciate your help, however, I have a new problem now
http://img842.imageshack.us/img842/695/72485213.png
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thing is not progressing at all
I remember the first time I did that I saw some progress both in the phone and in the program
Now I see SOME progress in the program, but that progress stopped a WHILE ago
Now the phone tells me
Downloading...
Do not turn off Target!!!
Now what should I do?
I would REALLY appreciate if you can continue helping me please since you seem to have experience with this
The Three fingered salute Vol up/down/power is a master reset to get back to original image file. When you mess-up the image you have to recover some other way. So far with the SGS4G the only way that is working until CWM is fixed is the oden process. It appears that oden is kind of a quirky program. Sometimes it locks up and you have to try again. So you need to have to give it time to work and if it fails you have to try again. Master reset uses files that are on the memory on the phone. Oden uses files on an external source an pushes them to the phone. To enable the push the phone has to be in download mode to receive the files. There is a device you can purchase to plug into the phone that will put the phone into download mode. It cost about $10. Its kinda handy if you are doing this alot, but removing the battery pushing both volume buttons and inserting the battery gets you there. You can also remove and reinsert the battery then plug in the tethering cable while pushing the buttons also as Krylon360 has pointed out.
Yeah if I don't see a progress bar in the phone, I'll just reboot
I finally have flashed the Samsung Galaxy S 4G to two ROMS
1) T959VKB5-Custom
2) KB5Deodexv15
I hope at least one of those can return the Bloatware
I want to recover the bloatware because it was located in the folder
/system/
So it doesn't occupies space in the folder /data/
1) T959VKB5-Custom is a better ROM since it restored Drive Smart and Think Office
The other ROM has nothing
I'm glad I finally discovered how to insert ROMs into my Samsung Galaxy S 4G
rafarataneneces said:
1) T959VKB5-Custom is a better ROM since it restored Drive Smart and Think Office
The other ROM has nothing
I'm glad I finally discovered how to insert ROMs into my Samsung Galaxy S 4G
Click to expand...
Click to collapse
Glad to hear you got it working. You may be able to find some of the apps you are looking for that are missing. Look around XDA I've seen some posts of others asking for some of the missing apps. There are some programs like Android Commander that can install APKs from your computer if you can download them there. You might be able to find some of those apps on the market possibly.
Wow thanks for that taking out the batterry attaching usb chord pressing vol buttons re attaching battery trick for download mode. I tried EVERYTHING else to try and get into download mode after I flashed 2.3.3 to my vibrant with out bootloaders.Was almost gonna Chuck phone against wall.
Very Appreciative and happy samsung vibrant 2.3.3 rooted owner
younglzz said:
Wow thanks for that taking out the batterry attaching usb chord pressing vol buttons re attaching battery trick for download mode. I tried EVERYTHING else to try and get into download mode after I flashed 2.3.3 to my vibrant with out bootloaders.Was almost gonna Chuck phone against wall.
Very Appreciative and happy samsung vibrant 2.3.3 rooted owner
Click to expand...
Click to collapse
It's very weird I know that
Ok so i was able to do it one time. I did and re flashed 2.3.3 with boot loader now I CANNOT GET BACK INTO DOWNLOAD MODE AT ALL. PLEASE HELP!!!
younglzz said:
Ok so i was able to do it one time. I did and re flashed 2.3.3 with boot loader now I CANNOT GET BACK INTO DOWNLOAD MODE AT ALL. PLEASE HELP!!!
Click to expand...
Click to collapse
You know your in the Galaxy S 4G section and NOT the Vibrant section right?
krylon360 said:
pop the bat out, remove the sim. put bat back on.
Vol UP+DOWN+PLUG IN USB
Click to expand...
Click to collapse
Thanks a lot
younglzz said:
Ok so i was able to do it one time. I did and re flashed 2.3.3 with boot loader now I CANNOT GET BACK INTO DOWNLOAD MODE AT ALL. PLEASE HELP!!!
Click to expand...
Click to collapse
Yeah...echoing Beef's question - you know you're in the 4g forum right? You shouldn't be flashing 2.3.3 on a SGS4g. If you're having issues flashing a vibrant (not the 4g), try posting in their forums.
krylon360 said:
pop the bat out, remove the sim. Put bat back on.
Vol up+down+plug in usb
Click to expand...
Click to collapse
thannnkkk you so much...it worked says succeed
nwpro3 said:
The Three fingered salute Vol up/down/power is a master reset to get back to original image file. When you mess-up the image you have to recover some other way. So far with the SGS4G the only way that is working until CWM is fixed is the oden process. It appears that oden is kind of a quirky program. Sometimes it locks up and you have to try again. So you need to have to give it time to work and if it fails you have to try again. Master reset uses files that are on the memory on the phone. Oden uses files on an external source an pushes them to the phone. To enable the push the phone has to be in download mode to receive the files. There is a device you can purchase to plug into the phone that will put the phone into download mode. It cost about $10. Its kinda handy if you are doing this alot, but removing the battery pushing both volume buttons and inserting the battery gets you there. You can also remove and reinsert the battery then plug in the tethering cable while pushing the buttons also as Krylon360 has pointed out.
Click to expand...
Click to collapse
Hi, when i tried rooting gb 2.3.3 with dsexton702's method i have the download mode problem. I tried all the methods possible here (except 4th in my case) but it did not work. It's 3.00 am here and I'm in panic my only way is to get that device because i'm in Turkey and no T-mobile here.
So, please tell me more about the thing you mentioned may be i can find it in here.
Please somebody help me!!
I think it may be because you have gb. Something to do with the boot loaders. There are a few other threads about download mode in gingerbread on the development section.
Sent from my SGH-T959V using XDA Premium App
You can put in download mode through adb... Goto command prompt
Cd/
Cd Androidsdk
Cd tools
Adb reboot download
Sent from my SGH-T959V using XDA App
ozgur1985 said:
Hi, when i tried rooting gb 2.3.3 with dsexton702's method i have the download mode problem. I tried all the methods possible here (except 4th in my case) but it did not work. It's 3.00 am here and I'm in panic my only way is to get that device because i'm in Turkey and no T-mobile here.
So, please tell me more about the thing you mentioned may be i can find it in here.
Please somebody help me!!
Click to expand...
Click to collapse
If you are having issues getting into DL mode after trying to go to GB, this method will likely not help you. This will get you to the recovery menu (blue) or CWM (Red or Orange) depending what you have installed on your phone. To get into recovery press the vol UP/DN/Power then release the buttons just before it cycles off again. I let it cycle once or twice so I can time when to release the buttons. I just count to about 4 or 5 then release the buttons. If you tried to install GB you will have to get into DL mode and flash the phone using Oden again using another ROM such as the KD1 ROM.
EDIT. To get into DL mode I use the method #3. Shut down phone. Pull battery out. Get oden setup on your computer by putting a Rom into the PDA box (Such as PDA_KD1.tar.md5). Put battery back in the phone. Hold the vol/up/dn buttons only. Then plug in your USB cable into your phone. That should put you in DL mode. Oden will detect your phone and light up yellow in the top first box and indicate which COM port you are on. If you can get that far press START and flash away. What you will likely have to do is flash the KC1 ROM with the Hawk_Sidekick_VibrantPlus_831.pit. That should bring your system back so you can flash other ROMs. Check This Post for directions on using this method. This is one way people have been recovering from GB problems. The top part explains how to get KC1 ROM installed. You can flash the KD1 ROM after that if you want, Just don’t use the Pit file or check repartition when going to KD1.
Thanx for your all help here guys! The next day i woke up early and my sister was about to leave home to do some walking, i told the situation to her and when i get back from toilet my phone was in download mode!! she thinks she pressed only vol down button and plugged the usb then the battery. I think the gingerbread download mode button combination can be different than the froyo. I wont try to get into download mode for a while not to have more adrenaline but as soon as i test and confirm i will post it here.
Don't recall seeing this yet on the forum, but here's a list of "keyboard shortcuts" to boot your device into bootloader, factory reset it or boot the recovery.
Recovery:
WARNING: if you have stock recovery and an update.zip in your external sd it will start to flash immediately
Volume- (two dots) and Poweron
Bootloader:
WARNING: this is very similar to factory reset, which will start immediately
Volume- (two dots) and Poweron and then toggle the rotation switch on and off a few times
JB BootLoader:
Boot with Volume- and PowerOn, First vibration => Release PowerOn, Second vibration => Release Vol- and press Vol+
Factory Reset:
WARNING: reset will start immediately
Volume+ (one dot) and Poweron and then toggle the rotation switch on and off a few times
APX Mode (for NVFlash):
WARNING: use APX mode only when you know what you are doing!
Hold Volume- (one dot) and Volume+ (one dot) and press reset button & release volume keys
Screen will stay black and power led will not light up. The only way to check APX mode is enabled is to plug the tablet to the PC and see if the APX device is there.
Regards,
Nika.
Recovery is using [volume-] + power ;-)
Sent from my A701 using xda app-developers app
paugustin said:
Recovery is using [volume-] + power ;-)
Sent from my A701 using xda app-developers app
Click to expand...
Click to collapse
oh silly me, I keep mixing them up. Modified them now... glad I added the warnings :silly:
Indeed, they are still wrong
vol-/power = recovery
vol-/power/rotation lock toggle = fastboot
vol+/power/toggle rotation = hard reset (that one was right )
paugustin said:
Indeed, they are still wrong
vol-/power = recovery
vol-/power/rotation lock toggle = fastboot
vol+/power/toggle rotation = hard reset (that one was right )
Click to expand...
Click to collapse
Yeah, just figured that out myself. Sorry. Changed it now
You can add the APX mode :
hold vol+ & vol-
press [reset] once
release volume keys
Screen will stay black and power led will not lit. The only way to check APX mode is enabled is to plug the tablet to the PC and see if the APX device is there.
paugustin said:
You can add the APX mode :
hold vol+ & vol-
press [reset] once
release volume keys
Screen will stay black and power led will not lit. The only way to check APX mode is enabled is to plug the tablet to the PC and see if the APX device is there.
Click to expand...
Click to collapse
Good one. Added it. Alternatively you can also restore an invalid boot image, and brick your device, or something like that to get into apx automatically
That would be too easy. I have done this in a more
interesting way after corrupting /data by the CM5 wipe and trying to repartition internal mem :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC Desire using xda app-developers
app
torlala101 said:
That would be too easy. I have done this in a more
interesting way after corrupting /data by the CM5 wipe and trying to repartition internal mem :
View attachment 1623041
Sent from my HTC Desire using xda app-developers
app
Click to expand...
Click to collapse
Attachment is unreadable, can you upload the original screenshot as attachment?
nikagl said:
Attachment is unreadable, can you upload the original screenshot as attachment?
Click to expand...
Click to collapse
Pls, excuse me for any inconvenience, I'm not much of a poster here, so the forum didn't allow me to post an external link and the attachment got automatically resized. Going to take super-regulatory measures and override the rules
I soft-bricked the phone with the CWM Recovery 5.0 Wipe, as I mentioned before, after only 3 months of using a rooted device, while trying to get a custom ROM installed to get usb camera driver working, found out that the /data partition has been corrupted by the old CWM ver, read the partition table size somewhere on the net for A510 and tried to repartition the SD to 12GB as it should be, but noticed the 32GB SD/MMC size mark in the output of the parted tool right after I entered the 12800 as the size. Was a little bit shocked, tried to apply some other's tablet partition sizes in the end, and this eventually bricked the device to black screen
And yeah, I did pay for the 16GB ver, the receipt said it's 16GB, the box has 32GB print label, the device has been partitioned as 16GB, I took it apart and read the memory label it was 32GB, if I am not mistaken, I assembled it with no issues and then I was able to partition it AS 32GB, as you can see on the screenshot. All I wanted was my device back to life, but out of curiosity couldn't stand trying to get extra 16GB for free. Curiosity killed the cat
The device now can get into both: APX with both volume down and reset AND into a 1-2 sec boot up with no vibe or screen light up after a short single power button press which is enough to get detected by a PC and power off immediately!
All my attempts to bring it back to life have failed, there is simply no custom software for it yet! NVFLASH was not able to do anything with it either. Acer support told me they do not have any access to give me a temporary login and password for the Acer Download Tool which would save the world for that day, and the device has my corp data within, so I can't handle it to any repair shop and it's just resting on the shelf as a bunch of antiques
Acer, I think this is a bit unfair, so I am putting an EXTRA effort into this...
hxxp://img687.imageshack.us/img687/2507/deadbeef.png
Thanks in advance to whomever will look into the issues with internal memory and perhaps bring a second life to my and such other devices on the planet!
I have to take off my hat in front of the Acer support.
After visiting an office of my local authorized repair center and explaining to them that I cracked the screen in halves, then plugged in a keyboard and killed my tablet with CWM wipe and later manually killed stock file table which finally put the device into a hard-brick state, lost my warranty because I disassembled it and, as a matter of fact, will not be willing to pay the price of a new and a better tablet for the replacement of the screen and the motherboard if they are not be able to recover the software part, I crossed my fingers and took a break.
I gave them a call two weeks after and got and answer that they were awaiting for a spare part, couldn't tell me right away which one. Taken into account that they have already had the screen by the time of my visit, I started worrying if they got me right and sent them an email to make sure if they were waiting for the screen instead of the motherboard and everything is fine with the software part.
Here's their reply:
"The screen has been replaced.
Motherboard has been ordered on warranty, since it is not Your fault.
You will be paying only for the screen replacement, i.e. $200.
As a minus, you will have to wait until we receive the motherboard.
Are you comfortable with this?"
OMG, they have a heart of gold... :good:
torlala101 said:
I have to take off my hat in front of the Acer support.
...
OMG, they have a heart of gold... :good:
Click to expand...
Click to collapse
Just got my tab from the official repair center.
I think they are laughing at me right now - they've put 32Gb motherboard into my 16Gb tablet :good:
How out apx mode acer a510!
nikagl said:
Don't recall seeing this yet on the forum, but here's a list of "keyboard shortcuts" to boot your device into bootloader, factory reset it or boot the recovery.
Recovery:
WARNING: if you have stock recovery and an update.zip in your external sd it will start to flash immediately
Volume- (two dots) and Poweron
Bootloader:
WARNING: this is very similar to factory reset, which will start immediately
Volume- (two dots) and Poweron and then toggle the rotation switch on and off a few times
Factory Reset:
WARNING: reset will start immediately
Volume+ (one dot) and Poweron and then toggle the rotation switch on and off a few times
APX Mode (for NVFlash):
WARNING: use APX mode only when you know what you are doing!
Hold Volume- (one dot) and Volume+ (one dot) and press reset button & release volume keys
Screen will stay black and power led will not light up. The only way to check APX mode is enabled is to plug the tablet to the PC and see if the APX device is there.
Regards,
Nika.
Click to expand...
Click to collapse
How out APX mode acer a510 im stuck here apx! tnx
sebasx said:
How out APX mode acer a510 im stuck here apx! tnx
Click to expand...
Click to collapse
Return your device for warranty... don't think there's any solution for getting out of APX mode...
nikagl said:
Return your device for warranty... don't think there's any solution for getting out of APX mode...
Click to expand...
Click to collapse
Not even reset?
gen_scheisskopf said:
Not even reset?
Click to expand...
Click to collapse
I don't think so... I couldn't get it out... possibly others have other experience?
nikagl said:
I don't think so... I couldn't get it out... possibly others have other experience?
Click to expand...
Click to collapse
Shouldn't it be possible to get out of it using nvflash? I've used it before for a Tegra 2 tablet, but I don't remember the exact steps. :/
Liquidator said:
Shouldn't it be possible to get out of it using nvflash? I've used it before for a Tegra 2 tablet, but I don't remember the exact steps. :/
Click to expand...
Click to collapse
Right, but afaik the key to unlock it is not available...
Hi.
I just got an A510 with a broken USB port. It didn't charge and the owner even sold the charger. I opened it, connected 2 wires at the battery so I charge it now. My only problem is, that I would like to use Android 4.3/4.4 and I don't know how to do it without an USB port. I tried Framaroot, but no luck.
You mention in the first post, that when one boots into recovery and there's an update.zip on the sdcard, then it installs it. Is it possible to root it this way?
Thanks in advance!
lj
liljom said:
Hi.
I just got an A510 with a broken USB port. It didn't charge and the owner even sold the charger. I opened it, connected 2 wires at the battery so I charge it now. My only problem is, that I would like to use Android 4.3/4.4 and I don't know how to do it without an USB port. I tried Framaroot, but no luck.
You mention in the first post, that when one boots into recovery and there's an update.zip on the sdcard, then it installs it. Is it possible to root it this way?
Thanks in advance!
lj
Click to expand...
Click to collapse
Please read alllllll the other threads in the "A510 Android Development" forum and you will learn how to do that...
Specifically the first threads that popup in that forum:
http://forum.xda-developers.com/showthread.php?t=1866378 for getting a CWM recovery on it which can do that
http://forum.xda-developers.com/showthread.php?t=2592095 for getting CM11 (KK 4.4) on it
Good luck!
Regards,
Nika.
i evryone igot some problem and hope to hepl me, i'm sorry if i open thread in a wrong place.
i tried to upgrade my i9003 from 2.3.4 to 2.3.6 and restarts on samsungs logo
i got this screen
http://postimage.org/image/ovgha3rjj/
i searched for hours and after i fashed phone 5 time with 5 file firmware i got nothing then i read somewhere to fash only pit file and i got brick
i canot turn on my phone
please helf me i tried to by this phone for 4 month and its now dead plz help,
Try first flashing xxkpe firmware then your desired firmware.
Sent from my GT-I9003 using xda app-developers app
crk1995 said:
Try first flashing xxkpe firmware then your desired firmware.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
i cant turn on my phone flash only pit got error and phone is dead now
Sent from my GT-I9003 using xda app-developers app wthat is that mean ? how send and what send ?
when i conetc phone to PC searcheing driver for OMAP 3630 what does this mean ?
l3onidas said:
i cant turn on my phone flash only pit got error and phone is dead now
Sent from my GT-I9003 using xda app-developers app wthat is that mean ? how send and what send ?
Click to expand...
Click to collapse
1. Stop panicking.
2. Remove the battery cover.
3. Remove the battery.
4. Reinsert the battery.
5. Now press and hold volume down, then home key, then the power button. IN THE ORDER.
6. If it goes to download mode, your phone still has a life.
7. Open Odin, select PIT, connect the device (In download mode), when it detects, press flash.
8. Disconnect, remove the battery, reinsert the battery.
9. Again, press and hold volume down, home and then power key, again in order. Download mode.
10. Flash XXKPE.
santoshsadani009 said:
1. Stop panicking.
2. Remove the battery cover.
3. Remove the battery.
4. Reinsert the battery.
5. Now press and hold volume down, then home key, then the power button. IN THE ORDER.
6. If it goes to download mode, your phone still has a life.
7. Open Odin, select PIT, connect the device (In download mode), when it detects, press flash.
8. Disconnect, remove the battery, reinsert the battery.
9. Again, press and hold volume down, home and then power key, again in order. Download mode.
10. Flash XXKPE.
Click to expand...
Click to collapse
its dont work dont have a raction when presing thist buttons :crying:
l3onidas said:
its dont work dont have a raction when presing thist buttons :crying:
Click to expand...
Click to collapse
If it can go to recovery, i am sure it can go to download mode also. Try again. Sometimes it doesn't work. Remove the battery and reinsert it and try again. Don't panic just yet.
Press and Hold Volume down. Keep Holding. At the same time press and hold Home (hardware) key. KEEP HOLDING BOTH. And then press and hold the power key. HOLD ON TO ALL THREE. Does it go to download mode?
santoshsadani009 said:
If it can go to recovery, i am sure it can go to download mode also. Try again. Sometimes it doesn't work. Remove the battery and reinsert it and try again. Don't panic just yet.
Press and Hold Volume down. Keep Holding. At the same time press and hold Home (hardware) key. KEEP HOLDING BOTH. And then press and hold the power key. HOLD ON TO ALL THREE. Does it go to download mode?
Click to expand...
Click to collapse
no bro its dont work i remove battery and reinsert it and push the buttonts but have no reactions i searching it on google and i got this if it last way to alive my phone ?
l3onidas said:
no bro its dont work i remove battery and reinsert it and push the buttonts but have no reactions i searching it on google and i got this if it last way to alive my phone ?
Click to expand...
Click to collapse
Sorry friend. I can't help you further because i don't know any more than this. Maybe any other member can help you in this case.
santoshsadani009 said:
Sorry friend. I can't help you further because i don't know any more than this. Maybe any other member can help you in this case.
Click to expand...
Click to collapse
thax you.
if anybody know if this method is working on i9003 if it goes on download mode and flash with XXKPE this version must this work ?
Samsung Galaxy S (How-To Unbrick *USB JIG Method*) video from you tube i dont have permission
Did you flashed the pit file for i9003 or some other phone's pit.
Sent from my GT-I9003 using xda app-developers app
crk1995 said:
Did you flashed the pit file for i9003 or some other phone's pit.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
i flashed same pit bat got error i dont know why
hi buddy, if you're phone is really showing no reaction after putting it to download mode (using the 3button combination), you might want to check this thread out:
http://forum.xda-developers.com/showthread.php?t=1411768
cheers,
ibaz said:
hi buddy, if you're phone is really showing no reaction after putting it to download mode (using the 3button combination), you might want to check this thread out:
http://forum.xda-developers.com/showthread.php?t=1411768
cheers,
Click to expand...
Click to collapse
i alive boot with gtag medusa box awesome box now i want Suitable rom. its restarted on samung logo or freezed on samung and phone is hotting
thanx dude but i alredy flash with KPQ and KP3( on gingerbread) now i trie FROYO i hope its work
now i am gonna mad
i alive dead boot now whant to flash and work ir properly
i go this pictur after flash what i can to do ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi there everyone.
I have a Galaxy tab 2 7" which has developed a problem.
Its stuck in a continuous boot loop when both connected to the computer or unplugged
I have changed the battery as I thought it had not been charged for a while but that has made no difference.
When plugged in the battery symbol shows then goes out
Repreated
When unpluged the Samsung logo shows then goes out
Repeated
I have tried booting into recovery mode which work but then the tab reboots and starts the Samsung Boot loop again
It has never been flashed so Im confused as what to do because the boot loop is continuous until the battery drains.
Any advice would be greatly appreciated
Cheers
bruno116 said:
Hi there everyone.
I have a Galaxy tab 2 7" which has developed a problem.
Its stuck in a continuous boot loop when both connected to the computer or unplugged
I have changed the battery as I thought it had not been charged for a while but that has made no difference.
When plugged in the battery symbol shows then goes out
Repreated
When unpluged the Samsung logo shows then goes out
Repeated
I have tried booting into recovery mode which work but then the tab reboots and starts the Samsung Boot loop again
It has never been flashed so Im confused as what to do because the boot loop is continuous until the battery drains.
Any advice would be greatly appreciated
Cheers
Click to expand...
Click to collapse
Best thing would be flashing firmware ......
Pm me for further assistance
My galaxy tab 2 7" is also having this issue
ashwin007 said:
Hi there everyone.
Best thing would be flashing firmware ......
Pm me for further assistance
Click to expand...
Click to collapse
PM'd you already ashwin007
anybody like to assist further
bruno116 said:
PM'd you already ashwin007
anybody like to assist further
Click to expand...
Click to collapse
Sorry dude for the late reply
A)go to http://www.sammobile.com/firmwares/
B)type the model of tab 2 & download latest firmware
Then.....Extract (unzip) the firmware file
Download Odin v3.09 from. https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Reboot and enjoy
Wont stay in download mode
Hello ashwin 007
I have tried to get into Download mode which i have done but then the tab reboots and leaves this mode and goes back to the Samsung logo continuously.
Therefore cannot seem to reflash firmware this way
Any other options or is it a dead dodo?
bruno116 said:
Hello ashwin 007
I have tried to get into Download mode which i have done but then the tab reboots and leaves this mode and goes back to the Samsung logo continuously.
Therefore cannot seem to reflash firmware this way
Any other options or is it a dead dodo?
Click to expand...
Click to collapse
you seems not be not holding the power button+ volume down properly,,,,,,keep these two buttons pressed for few seconds until you see a blue droid coming,,whenever you see it,,,,,press volume up button immediately,,,
lokesh.3440 said:
you seems not be not holding the power button+ volume down properly,,,,,,keep these two buttons pressed for few seconds until you see a blue droid coming,,whenever you see it,,,,,press volume up button immediately,,,
Click to expand...
Click to collapse
I have the Power and Volume down Button contuniously,
there is no Blue android comes up
the tab reboots even with these buttons pressed down!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bruno116 said:
I have the Power and Volume down Button contuniously,
there is no Blue android comes up
the tab reboots even with these buttons pressed down!
Click to expand...
Click to collapse
when you see this screen,,,immediately leave those two buttons and press volume up button as shown in the screenshot you have shared......then it will go into download mode..
lokesh.3440 said:
when you see this screen,,,immediately leave those two buttons and press volume up button as shown in the screenshot you have shared......then it will go into download mode..
Click to expand...
Click to collapse
I have tried this but its as if the up volume button doesn't respond.
The tab just reboots to the Samsung logo again continously
bruno116 said:
I have tried this but its as if the up volume button doesn't respond.
The tab just reboots to the Samsung logo again continously
Click to expand...
Click to collapse
Try this
Put your phone to charge then keep the power pressed till it shutdown
It should not reboot if u put it in charge
Then unplug charge and then
Keep the volume down pressed and then the power at the same time
U should go to the menu like that picture above
When u see it leave the buttons
Then press volume up
It should get u to the download screen
Then go to the sammobile link above and install a software for your tab
Then load it in Odin as above then press start
--------------------------*-*-*-*-&*8*&&*-8*9*8-%8**-6
If u already have a software u don't need to dop the above
Just
Put it to charge and turn it off
Unplug
Volume up+power till it opens
Wait for the recovery
Wipe data and ...
Wipe cache(not neccecery)
Then reboot
scorpionma said:
Try this
Put your phone to charge then keep the power pressed till it shutdown
It should not reboot if u put it in charge
Then unplug charge and then
Keep the volume down pressed and then the power at the same time
U should go to the menu like that picture above
When u see it leave the buttons
Then press volume up
It should get u to the download screen
Then go to the sammobile link above and install a software for your tab
Then load it in Odin as above then press start
--------------------------*-*-*-*-&*8*&&*-8*9*8-%8**-6
If u already have a software u don't need to dop the above
Just
Put it to charge and turn it off
Unplug
Volume up+power till it opens
Wait for the recovery
Wipe data and ...
Wipe cache(not neccecery)
Then reboot
Click to expand...
Click to collapse
Hi there peeps,
just like to say thanks for the help so far and apologies if i'm not making myself very clear.
I tried as you suggest but when plugged in it shows battery symbol with no charge on constant reboot loop
When NOT t shows samsung logo on constant reboot loop
The Tab does not switch off altogether, it always shows either battery or samsung logo
it remains on some kind off boot loop until battery drains.
Once drained and plugged in again shows boot loop again
I can press power and vol down which takes it to the screen pictured on previous post.
If i take my fingers of all buttons when this happens the tab WILL reboot back to the Samsung boot loop after approx 2 seconds
So i can get to the option screen but cannot press vol up to continue because the tab reboots automatically.
http://youtu.be/x7mj3RRF5bU
bruno116 said:
Hi there peeps,
just like to say thanks for the help so far and apologies if i'm not making myself very clear.
I tried as you suggest but when plugged in it shows battery symbol with no charge on constant reboot loop
When NOT t shows samsung logo on constant reboot loop
The Tab does not switch off altogether, it always shows either battery or samsung logo
it remains on some kind off boot loop until battery drains.
Once drained and plugged in again shows boot loop again
I can press power and vol down which takes it to the screen pictured on previous post.
If i take my fingers of all buttons when this happens the tab WILL reboot back to the Samsung boot loop after approx 2 seconds
So i can get to the option screen but cannot press vol up to continue because the tab reboots automatically.
http://youtu.be/x7mj3RRF5bU
Click to expand...
Click to collapse
Samsung can only save you......all the best!!
Does kies detect your tablet?
Since you have original firmware, may reflashing it again could help.
Sent from my GT-P5100 using xda app-developers app
what happend with u ?
same problem here! but i made it boot!
I have the same problem.
As a matter of fact my device is in boot loop all the time...
What i did is that i cracked open the device... and i tried everything... disconnected the batterry, pressed the power button down for many seconds with and without the batterry... nothing...
After all these, i started disconnecting stuff from the pcb to see what is stopping the system from booting (in the loop it showed that the battery was empty. but it wasn't. when it booted it had 70%)
I disconnected the power button molex and boom! manual recovery mode!
But without any buttons what can you really do.
The moment i put the molex back on and navigated through the selections... after 3 seconds it started looping again...
One of the times, i was fast and i pressed the system restart, then disconnected the molex again. BOOM ! device restarted...
Once in the device started i thought i would plug in the buttons molex back... then the power down menu popped out and ... boot loop started again ...
Now it is still opened in main screen, without buttons connected, and i'm afraid to plug them back in
[edit]
When i disconnect the buttons molex ribbon it boots up normally.
Every time i push the buttons molex ribbon back in it goes in loop.
SOLVED ! ! !
BOOT LOOP... SOLVED ! ! !
I took a cotton bud, dipped in alcohol, then squeezed for the excess liquid to run out (local "Cretan Raki" made from grapes like Italian "Grappa" you could also use vodka), and i cleaned the contacts on the outside of the plastic molex connector of the ribbon.
Then cleaned the area very well, with a dry cotton bud, before reconnecting.
It seams that the dust particles had created a some sort of short circuit. (the device is clean inside! that impresses me the most)
Mine works now!
http://www.fileconvoy.com/dfl.php?id=g801a35ca7d457ed69995777030df56007425cda93
Hello everybody i new on the sony, sry for my english.
Here we are the problem is that my girl try to update the phone and closed cause of battery on the provedure after i tryed to open and it auto deleteed files from inside and closed, when i try to reopen it stuck on the sony logo, i tryed flashing it with the flashh tool but when i go to flashmode the phone its going inside i mean this green led upster, well but nothing rly happen i cant flash nothing ,when i go to fastboot mode the program its recognizing the phone and the computer both from the sound that something connected (on flash mode nothing of this) well i try to do it with fastboot mode and to flash the kernel, ok i did it with the vinays guide from here : ( https://forum.xda-developers.com/xp...-xperia-e3-t3012248/post58410003#post58410003 ) but when i try to do the Step 5 - Now disconnect USB and press power button on phone. Phone will vibrate with WHITE notification light press vol up and down untill you see CWM recovery. just nothing happened cant go to recovery mode not white or purple light appears so do somebody help me to ubrick this phone cause troubles me 3 days pain in the ***. thnx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not sure how to install CWM,i am actually trying to do that too,but i can help you unbrick your phone.
1. Download Xperia Companion and install it http://support.sonymobile.com/global-en/tools/xperia-companion/
2. Run it,and go to software repair,follow the steps until the program requests you to connect the usb to your computer
3. When you get to that part,hold volume UP and the Power button for around 10 seconds and your phone should vibrate 3 times
4. When your phone vibrates,stop holding that buttons and connect your phone to usb while holding volume DOWN and Power button and wait for it to repair your phone
This will delete all of your data but there is no other way(or i haven't heard of it)
Good luck unbricking your phone!
didnt help
AcADebiLcinA said:
I am not sure how to install CWM,i am actually trying to do that too,but i can help you unbrick your phone.
2. Run it,and go to software repair,follow the steps until the program requests you to connect the usb to your computer
3. When you get to that part,hold volume UP and the Power button for around 10 seconds and your phone should vibrate 3 times
4. When your phone vibrates,stop holding that buttons and connect your phone to usb while holding volume DOWN and Power button and wait for it to repair your phone
This will delete all of your data but there is no other way(or i haven't heard of it)
Good luck unbricking your phone!
Click to expand...
Click to collapse
i did it exactly like you said but rly nothing happened yes phone vobrates 3 times after i hold volume down and power button connect to pc for 5 min and nothing ... should i try it more time or its time to throw the phone ?
when xperia companion wants you to plug phone in usb do that vibrating thing and let the buttons go after the third vibrate and wait for 5 seconds and then connect phone to pc with volume down and power button and when you connect it let the buttons go and your phone should turn on the green led light(or some other color,idk,it is green on my phone) and follow the instructions that xperia companion tells you to do
---------- Post added at 10:17 PM ---------- Previous post was at 09:57 PM ----------
EDIT: nevermind,sorry,my bad,after the vibrations thing hold only volume down and connect it,that should work
did you fix it?
AcADebiLcinA said:
did you fix it?
Click to expand...
Click to collapse
sorry for the delay i was little bit outside of internet connection cause lot of work and didnt had time for nothing nope nothing happened still the same thing...
are you sure you did everything same as i told you?
when you come to the vibrating part and you need to plug in your phone to computer hold ONLY VOLUME DOWN BUTTON,without the power,it was my mistake,you only need to hold the volume down,and then connect the phone to pc while still holding the volume down and you should see a green led light on your phone and then let the volume button go and just follow the setup
AcADebiLcinA said:
are you sure you did everything same as i told you?
when you come to the vibrating part and you need to plug in your phone to computer hold ONLY VOLUME DOWN BUTTON,without the power,it was my mistake,you only need to hold the volume down,and then connect the phone to pc while still holding the volume down and you should see a green led light on your phone and then let the volume button go and just follow the setup
Click to expand...
Click to collapse
yes exactly like you said my friend i see the green light but nothing happening after the pcc its staying there where its saying me to connect the phone and nothing else...
xaris3000 said:
yes exactly like you said my friend i see the green light but nothing happening after the pcc its staying there where its saying me to connect the phone and nothing else...
Click to expand...
Click to collapse
uh,not sure then,maybe reinstall sony pc companion,or run an antivirus software so you delete the viruses that may be blocking your repair if you have any viruses? or try from another pc? or use another usb cable? i am running out of ideas,hope you success repairing it
AcADebiLcinA said:
uh,not sure then,maybe reinstall sony pc companion,or run an antivirus software so you delete the viruses that may be blocking your repair if you have any viruses? or try from another pc? or use another usb cable? i am running out of ideas,hope you success repairing it
Click to expand...
Click to collapse
well imagine that i did just before 4 5 hours foarmat my pc and goes back to windows 7 i tried with 5 differents cable and nothing i dont know what can i say...thats why im asking someone who maybe have better knowledge on this things nvm thnx a lot
If your phone is connecting by Flash mode (green LED and turns off) you may use unofficial flashtool and select the XF icon. You have to select your phone name and model (Xperia E3 and D2203). Then choose any rom (the latest one is 18.5.C.0.25) from any country and click on the information next to Available Firmware adn Download it.
Back in the flashtool open lighting icon, select Flashmode. A list will display, select your rom and check all the squares.
Wait. Some time later it will say to connect your phone, do that and tell me if works.
rmnhg said:
If your phone is connecting by Flash mode (green LED and turns off) you may use unofficial flashtool and select the XF icon. You have to select your phone name and model (Xperia E3 and D2203). Then choose any rom (the latest one is 18.5.C.0.25) from any country and click on the information next to Available Firmware adn Download it.
Back in the flashtool open lighting icon, select Flashmode. A list will display, select your rom and check all the squares.
Wait. Some time later it will say to connect your phone, do that and tell me if works.
Click to expand...
Click to collapse
hello, i can connect only on fastbootmode the flashmode its not recognized only the fastbood mode
xaris3000 said:
hello, i can connect only on fastbootmode the flashmode its not recognized only the fastbood mode
Click to expand...
Click to collapse
Try to install PC companion to fix that