Ok, so I am new to rooting Android, and I kinda rushed into it after finally getting the drivers working (curse you Kies and MTP driver for not working on Windows 7), and now my Tab won't actually run. It is stuck at the "Samsung Galaxy Tab 2 7.0" splash screen.
At this point, I just want to get it running again.
The good news is I can still access the downloader (Power button and down volume button), and what is called the "Android system recovery". I tried the factory reset / wipe cache, but no luck.
So, this is what I did to get to this point:
I used the CF-Auto-Root-espressowifi-espressowifiue-gtp3113 package and Odin to load the PDA file. I had previously tried different PDA files.
So, I have given up on root access. How to I set it back to the original "Binary"?
Thank you!
OK, so I got it fixed by uploading a factory firmware, using the latest version of Odin. Thank you for your help (you can find the firmware at various sites on the web)
megahuts said:
OK, so I got it fixed by uploading a factory firmware, using the latest version of Odin. Thank you for your help (you can find the firmware at various sites on the web)
Click to expand...
Click to collapse
i have the same exact problem what did you do.. i have a gt 5113
tsotso15 said:
i have the same exact problem what did you do.. i have a gt 5113
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1704668
sergio_f said:
http://forum.xda-developers.com/showthread.php?t=1704668
Click to expand...
Click to collapse
i tried the file and it didnt work
tsotso15 said:
i tried the file and it didnt work
Click to expand...
Click to collapse
You have flashed with odin ?
Sent from my Xperia X10 using XDA Premium HD app
sergio_f said:
You have flashed with odin ?
Sent from my Xperia X10 using XDA Premium HD app
Click to expand...
Click to collapse
yes i did everything went through but now it is still stock on The Samsung logo and it flashes at times
tsotso15 said:
yes i did everything went through but now it is still stock on The Samsung logo and it flashes at times
Click to expand...
Click to collapse
Strange, have you flashed CWM?
sergio_f said:
Strange, have you flashed CWM?
Click to expand...
Click to collapse
ok so now the tablette loads up .. i havent install the cwm yet because when i go into recovery mode the android robot has a red triangle on top of him.. and if i try to install cwm i get E: Failure to verify whole-file signature E: signature verification failed
so close yet so far lol
tsotso15 said:
ok so now the tablette loads up .. i havent install the cwm yet because when i go into recovery mode the android robot has a red triangle on top of him.. and if i try to install cwm i get E: Failure to verify whole-file signature E: signature verification failed
so close yet so far lol
Click to expand...
Click to collapse
Flash cwm through Odin and when your done. That's if if works correctly shut down the tab and when the samsung galaxy tab 2 7.0 logo appears hold the power and volume down keys at the same time. Let it show the logo twice and it will boot into CWM
Sent from my ThunderBolt using xda premium
Related
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Mohan211 said:
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Click to expand...
Click to collapse
wiping cache shall be helped you.
re-try to re-flash the cwm..maybe you do it wrong.
H.Style86 said:
re-try to re-flash the cwm..maybe you do it wrong.
Click to expand...
Click to collapse
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Mohan211 said:
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Click to expand...
Click to collapse
What android driver?
Sent from my SCH-I500 using Tapatalk 2
Nevermind I fixed it. Not too sure how but it worked.
Thanks anyway guys!
ndaryruro feudal
Sometimes it's just enough to take out the battery and put it in again
Stuck at boot logo
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
SumitBishnoi said:
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
Click to expand...
Click to collapse
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
No ,Only Auto Reboot and F. Reset Time were checked
SumitBishnoi said:
No ,Only Auto Reboot and F. Reset Time were checked
Click to expand...
Click to collapse
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Stuck at boot logo
bbrad said:
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot . I just flashed back after clearing cache and it worked fine. You people rocks.
Hi, I have a problem that has me worried is that I had the latest version for my galaxy s3, but I started to give problems with the camera, when the error was saying abria camera.
Well I decided to flash again using odin android version 3.07 and version I535VRBMF1, but when you finish installing and Restarts the phone enters recovery mode says this
e: failed to Verify whole-file signature
E: signature verification failed
Instalation aborted.
I've tried with version 4.0.4 and also feel the same, not to do never had happened, the stock rom is all and that I had also, in some cases the phone rises to the configuration but remains there, says updating android is not letting me do anything, begins to vibrate.
thanks
Are you sure you have a Verizon GSIII (SCH-I535)?
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Are you sure you have a Verizon GSIII (SCH-I535)?
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Yes sure i535 Verizon
Andr3s said:
Yes sure i535 Verizon
Click to expand...
Click to collapse
Hmm, try Odin flashing one of these tar files, preferably BLK3. I'm somewhat confused by your words. When you Odin flash a tar, it successfully does so then it never boots into the rom and automatically goes back into recovery? Is that what you're saying?
SlimSnoopOS said:
Hmm, try Odin flashing one of these tar files, preferably BLK3. I'm somewhat confused by your words. When you Odin flash a tar, it successfully does so then it never boots into the rom and automatically goes back into recovery? Is that what you're saying?
Click to expand...
Click to collapse
Hi, thanks for your help friend, had not seen what you said and use this method
http://forum.xda-developers.com/showthread.php?t=1762204
It worked fine, then rootie and unlocking the bootloader and then flash this rom
I535VRBMD3_StockRootOdex
Thanks pro everything.
I tried to run CWM in System Recovery but everytime I try to install a ZIP file I get:
E:signature verification failed
Installation aborted.
I read over several posts on this subject but cannot figure it out.
I have:
Samsung Infuse
Gingerbread - installed after I had bricked my phone - UCLB3_Unbrick_root_1.1.zip
My Android Recovery Menu is blue - <3e>
When in my phone, I can run Terminal and get a Linux prompt - so I assume that means its rooted.
Wanting to get CWM.zip installed so I can go on to installing ICS and then on to JB.
Any ideas on how to get passed this roadblock?
Thanks
Carl
cwmoser said:
I tried to run CWM in System Recovery but everytime I try to install a ZIP file I get:
E:signature verification failed
Installation aborted.
I read over several posts on this subject but cannot figure it out.
I have:
Samsung Infuse
Gingerbread - installed after I had bricked my phone - UCLB3_Unbrick_root_1.1.zip
My Android Recovery Menu is blue - <3e>
When in my phone, I can run Terminal and get a Linux prompt - so I assume that means its rooted.
Wanting to get CWM.zip installed so I can go on to installing ICS and then on to JB.
Any ideas on how to get passed this roadblock?
Thanks
Carl
Click to expand...
Click to collapse
Here get the option C http://forum.xda-developers.com/showthread.php?t=1613523 flash this with odin and you will have CWM recovery
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
Here get the option C http://forum.xda-developers.com/showthread.php?t=1613523 flash this with odin and you will have CWM recovery
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Many Thanks again.
That gave me a fresh install with CWM red menu.
Thanks
Carl
cwmoser said:
Many Thanks again.
That gave me a fresh install with CWM red menu.
Thanks
Carl
Click to expand...
Click to collapse
I am glad to be of help, good luck and have a happy flash :thumbup:
Sent from my SGH-I997 using XDA Premium 4 mobile app
can i do the same with bricked chinese phone ?
i have a XPHONEX x550 phone note ...
i have it stuck on android sign , i tried to get its firmware from a similar phone ... i could extract the SYSTEM folder,
but i could't extract BOOT or RECOVERY or BOOTLOADER ...
is there a way to build up an UPDATE.zip from system alone ?? so i can fix mine !
i tried something like signing the system.zip and played a bit with meta-inf ... but i always get to the error : signature verification failed ... and i can't install CWF because i don't have the USB driver for this phone in recovery mode...
it's like a mission impossible case
thank you anyway
help please
alexischino said:
Here get the option C http://forum.xda-developers.com/showthread.php?t=1613523 flash this with odin and you will have CWM recovery
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ser can u help fix signature verification failed in may alcatel one touch pixi 4007d
i tried many things but i always failed huhuhuhuh i want to root may fone but it cant b'coz of that!
Signature verification failed
I have the same error message, with the recovery e3 in a sgs i9000, and no usb port. Anyone can showme a solution without odin or cable? Terminal or something? I don't find anything... Thanks a lot.
When I try the thread that fixes the issue, all file locations are file not found
W0lfman said:
When I try the thread that fixes the issue, all file locations are file not found
Click to expand...
Click to collapse
Some stuff is mirrored luckily...
Hello,
Could anyone help me with this?
I have a Samsung Galaxy S T959V
Stock gingerbread 2.3.6 (Baseband T959VUVKJ6)
Kernel Version (2.6.35.7blastoff-v2.5+) After flashing
CWM-based Recovery v5.0.2.8 - after flashing Kernel
Rooted
Build NUmber (Gingerbreag.VUVKJ6)
The phone wont let me isntall/update cm-7, cm-9, cm-10 or any ROM
i do as it is said on every post and nothing
im trying to install - 4.1.1 Jelly Bean [CyanogenMod 10][05-09-2012] - and nothing
i get this errors:
E:signature verification failed
Installation aborted
E:failed to verify whole-file signature
and so many others
What color is your recovery?
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
Blusteryboat2 said:
Hello,
Could anyone help me with this?
I have a Samsung Galaxy S T959V
Stock gingerbread 2.3.6 (Baseband T959VUVKJ6)
Kernel Version (2.6.35.7blastoff-v2.5+) After flashing
CWM-based Recovery v5.0.2.8 - after flashing Kernel
Rooted
Build NUmber (Gingerbreag.VUVKJ6)
The phone wont let me isntall/update cm-7, cm-9, cm-10 or any ROM
i do as it is said on every post and nothing
im trying to install - 4.1.1 Jelly Bean [CyanogenMod 10][05-09-2012] - and nothing
i get this errors:
E:signature verification failed
Installation aborted
E:failed to verify whole-file signature
and so many others
Click to expand...
Click to collapse
you need a voodoo kernel + voodoo cwm recovery for install any rom
download this and flash with odin
Voodoo CWM + Kernel Odin Tar File
Sgs4g t959v
Thanks for the help.
Could you help me updating to JB 4.0 or 4.1?
Or recommended me an update.
Thanks in advance.
Blusteryboat2 said:
Thanks for the help.
Could you help me updating to JB 4.0 or 4.1?
Or recommended me an update.
Thanks in advance.
Click to expand...
Click to collapse
I'm going to recommend some threads that you should read. Some are old, but still have very good information. The first link will show you the basic, and help you go from stock Froyo to custom GB. Then you can use what you learn there and the install information from the ROM you want to install, and go to JB or ICS.
The other links will come in handy in case of a problem, but I recommend to read them because it's good info to learn. Hope this help you.
1) http://forum.xda-developers.com/showthread.php?t=1470716
2) http://forum.xda-developers.com/showthread.php?t=1358498
3) http://forum.xda-developers.com/showthread.php?t=1500427
Any good stable cm 11 compatible gapps? Because the last ones I used didn't work properly.
Sent from my SGH-T959V using XDA Premium 4 mobile app
SamsungIsBetterThanApple said:
Any good stable cm 11 compatible gapps? Because the last ones I used didn't work properly.
Sent from my SGH-T959V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Download the latest ones from here:
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
FBis251 said:
Download the latest ones from here:
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
Click to expand...
Click to collapse
OK thank you. I am sorry for posting comments on both forums, it was taking a while for a response so I thought I would try a different one. Thanks again!
Sent from my SGH-T959V using XDA Premium 4 mobile app
I was flashing my phone using Odin and noticed after I clicked start that the re-partition option was checked. The Odin screen then froze .. After waiting for a while for it to continue the flashing process I finally close Odin and removed my battery to restart my phone. Unfortunately now I can't restart my phone. When I press the power button nothing happens. Now I also trying to flash using heimdall one click but following error occurred.
" LOCAL AND DEVICE PIT FILES DON'T MATCH AND RE-PARTITION WASN'T SPECIFIED!
Please Help me.. why this happened?
Rehan Siddiqui said:
I was flashing my phone using Odin and noticed after I clicked start that the re-partition option was checked. The Odin screen then froze .. After waiting for a while for it to continue the flashing process I finally close Odin and removed my battery to restart my phone. Unfortunately now I can't restart my phone. When I press the power button nothing happens. Now I also trying to flash using heimdall one click but following error occurred.
" LOCAL AND DEVICE PIT FILES DON'T MATCH AND RE-PARTITION WASN'T SPECIFIED!
Please Help me.. why this happened?
Click to expand...
Click to collapse
First things first, do you have an
SGH-T959V
or
SGH-T959W
?
You can check this by lifting the battery and checking the sticker on the phone.
FBis251 said:
First things first, do you have an
SGH-T959V
or
SGH-T959W
?
You can check this by lifting the battery and checking the sticker on the phone.
Click to expand...
Click to collapse
SGH-T959V
Please Help me I will be really thankful to you..
Are you able to get into download mode?
champ1919 said:
Are you able to get into download mode?
Click to expand...
Click to collapse
Yes have access to download mode..
I'm an odin fan. Does odin detect the phone while it's connected? Do you still have both drivers installed? They will clash.
champ1919 said:
I'm an odin fan. Does odin detect the phone while it's connected? Do you still have both drivers installed? They will clash.
Click to expand...
Click to collapse
Yes odin detect the phone... Yes samsung usb drivers are installed
Try going back to froyo with this http://sourceforge.net/projects/kc1cleanup/files/hawk.zip/download
champ1919 said:
Try going back to froyo with this http://sourceforge.net/projects/kc1cleanup/files/hawk.zip/download
Click to expand...
Click to collapse
Thank You Sooo much brother.. I am very happy my phone is perfect now.. Again Thank you
champ1919 said:
Try going back to froyo with this http://sourceforge.net/projects/kc1cleanup/files/hawk.zip/download
Click to expand...
Click to collapse
NOTE: not for SGH-T959W!!!
Please be careful to make sure you have SGH-T959V under your battery!
Flashing SGH-T959V bootloaders will hose your SGH-T959W!
bhundven said:
NOTE: not for SGH-T959W!!!
Please be careful to make sure you have SGH-T959V under your battery!
Flashing SGH-T959V bootloaders will hose your SGH-T959W!
Click to expand...
Click to collapse
Yes YEs I have T959V
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
MeTheAwesomest said:
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
Click to expand...
Click to collapse
So I think you flashed a incompatible Rom on your tab 2, well the only way to get it back booting is to try restoring it back to stock firmware, just Google how to restore tab 2 to stock, and follow the video on the channel droid cheats but yeah if you have got pretty fast internet and don't want to spend entire life downloading that 1GB file go the general discussion of the tab 2 7.0 forum here and scroll down you will find a thread named fast download link stock firmware I think it should be something like that and download the one made for p3100, want more help comment below
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So I think you flashed a incompatible Rom on your tab 2, well the only way to get it back booting is to try restoring it back to stock firmware, just Google how to restore tab 2 to stock, and follow the video on the channel droid cheats but yeah if you have got pretty fast internet and don't want to spend entire life downloading that 1GB file go the general discussion of the tab 2 7.0 forum here and scroll down you will find a thread named fast download link stock firmware I think it should be something like that and download the one made for p3100, want more help comment below
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
The person who posted it on the site said "THIS IS ONLY FOR P3100! P3110 WILL BE RELEASED LATER BASED ON HOW THIS ONE TURNS OUT" and i have a P3100!
And also, my device is not booting! How will i restore to stock firmware? And, I did a nandroid backup and stored it on my PC. Does that mean i can either restore through the backup, or get my data after restore to stock firmware?
MeTheAwesomest said:
The person who posted it on the site said "THIS IS ONLY FOR P3100! P3110 WILL BE RELEASED LATER BASED ON HOW THIS ONE TURNS OUT" and i have a P3100!
And also, my device is not booting! How will i restore to stock firmware? And, I did a nandroid backup and stored it on my PC. Does that mean i can either restore through the backup, or get my data after restore to stock firmware?
Click to expand...
Click to collapse
So you mean you can't even boot to download mode?
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So you mean you can't even boot to download mode?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
It Literally stays STUCK at the new boot image! The engine heats up and stuff. It ran out of battery, and when i charged and turned it on, it was still just showing the boot image!
MeTheAwesomest said:
It Literally stays STUCK at the new boot image! The engine heats up and stuff. It ran out of battery, and when i charged and turned it on, it was still just showing the boot image!
Click to expand...
Click to collapse
Do you know how to enter download mode, switch on the tablet while holding volume down and power key, tell me if you can do that there's no need to see the new boot image for this
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Do you know how to enter download mode, switch on the tablet while holding volume down and power key, tell me if you can do that there's no need to see the new boot image for this
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
It gives me a screen saying,
Warning!!
A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise, press volume down to cancel.
So, shouldI press volume up?
MeTheAwesomest said:
It gives me a screen saying,
Warning!!
A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise, press volume down to cancel.
So, shouldI press volume up?
Click to expand...
Click to collapse
First tell me have you watched tutorial on YouTube on how to restore the tablet to stock rom?
If no then watch this really well made video
https://youtu.be/7L-UCSKE3Xo
Sent from my GT-P3100 using Tapatalk
shsagnik said:
First tell me have you watched tutorial on YouTube on how to restore the tablet to stock rom?
If no then watch this really well made video
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Thanks for the link. Also i had done a nandroid backup saved on my pc. Can i recover my data?
MeTheAwesomest said:
Thanks for the link. Also i had done a nandroid backup saved on my pc. Can i recover my data?
Click to expand...
Click to collapse
Of course you can do that
Install cwm using Odin or just Google how to do that on tab 2
Then place the nandroid backup on the cwm folder of tab
Then go to cwm using
Volume up and power button
Backup and restore and yeah just restore it
Any doubt, question or query?
Just post it below I will help you
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Of course you can do that
Install cwm using Odin or just Google how to do that on tab 2
Then place the nandroid backup on the cwm folder of tab
Then go to cwm using
Volume up and power button
Backup and restore and yeah just restore it
Any doubt, question or query?
Just post it below I will help you
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
One small Question: Will my root come back if I restore my data?
MeTheAwesomest said:
One small Question: Will my root come back if I restore my data?
Click to expand...
Click to collapse
If you have made an full cwm backup including system partition then yeah your root will come back
Sent from my GT-P3100 using Tapatalk
shsagnik said:
If you have made an full cwm backup including system partition then yeah your root will come back
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Can i just install my Backup when my device is in Download mode? If no, then why?
I just want to understand this. Thanks.
MeTheAwesomest said:
Can i just install my Backup when my device is in Download mode? If no, then why?
I just want to understand this. Thanks.
Click to expand...
Click to collapse
No you can't because Odin can only work with Tar.md5 files and using something else like zip files will cause trouble a lot of trouble and yeah sometimes I forgot to check xda so sorry for late reply by the way what's your age because you sound little bit childish
Sent from my GT-P3100 using Tapatalk
shsagnik said:
No you can't because Odin can only work with Tar.md5 files and using something else like zip files will cause trouble a lot of trouble and yeah sometimes I forgot to check xda so sorry for late reply by the way what's your age because you sound little bit childish
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Yeah, well.
I'm one year before teen. 12.
MeTheAwesomest said:
Yeah, well.
I'm one year before teen. 12.
Click to expand...
Click to collapse
That's great that you are concerned about your devices and want to fix, I am 16 and even people of my age aren't able to fix their devices when they get it bricked
Sent from my GT-P3100 using Tapatalk
did you clear dalvik cache before flashing the kernel and rom?
:good:
MeTheAwesomest said:
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
Click to expand...
Click to collapse
hello sir,
i know how to solve your problem.
the problem you are facing is a boot loop .i.e you get stuck in the boot logo
and your device never goes further.
the common reason is not clearing dalvik cache before flashing a new rom in recovery.
so now solve this problem follow these steps.
1. charge your device fully and go to recovery.
2. do the following-
do a factory data reset.
clear cache and go to advanced and clear dalvik cache.
now flash the kernel and rom and the gapps(if you have).
now reboot and see you will go through the boot logo .
HURRAY YOU HAVE SUCCESSFULLY FLASHED YOUR NEW ROM
NOTE: all the steps above are only to practice in CWM Recovery.
if you still have any problems let mw know.
thanks
Zte blade l said:
:good:
hello sir,
i know how to solve your problem.
the problem you are facing is a boot loop .i.e you get stuck in the boot logo
and your device never goes further.
the common reason is not clearing dalvik cache before flashing a new rom in recovery.
so now solve this problem follow these steps.
1. charge your device fully and go to recovery.
2. do the following-
do a factory data reset.
clear cache and go to advanced and clear dalvik cache.
now flash the kernel and rom and the gapps(if you have).
now reboot and see you will go through the boot logo .
HURRAY YOU HAVE SUCCESSFULLY FLASHED YOUR NEW ROM
NOTE: all the steps above are only to practice in CWM Recovery.
if you still have any problems let mw know.
thanks
Click to expand...
Click to collapse
Thanks, I figured out the problem. Now I am on CM12.1! Yay!
Could you please guide me to install a Custom ROM in my galaxy tab GT-P3100?
How do I flash recovery?
How do I root?
How do I install a Custom ROM?
Provide me the link to download required files.
Thanks in advance!!
Sent from my Sparkle V using Tapatalk
Hello guys.i wanna ask about my tab 2 stuck on firmware upgrade.i cant go to download mode.i have flash stock firmware.its success.but not boot .do anyone have any idea to fix this thing
Sent from my GT-N7000 using xda Forums PRO