[GUIDE] ALL WIFI ISSUES , Turning on... , No network accessible , speed - HTC Sensation

Hi all,
I think I've experienced ALL KINDS of WiFi issues! And so far, thanks God I've taken over all of them successfully! :good:
So I wanted to share my experiences so that they would help someone.
1st. The first problem I got, was the way when I turned on WiFi, it would RAPIDLY get back to its off state at once! But that was a simple issue which ONLY needed to GET MY PHONE "S-OFF" and it got OK.
2nd. The second issue, was that the WiFi would turn on on the next ROM, but STUCK ON "Searching for WiFi Networks..."; After searching a bit through the Net and the Forum, I tried "WiFix Manager.apk" which was supposed to figure out those issues related to the regional problems, and fortunately it did work and the WiFi Networks nearby just began to be found on my phone!
3rd. The third of my issue-buddies (!) was horrible speed over WiFi using the next ROM, which I never figured out and I think related to that ROM, as my WiFi worked quite great on the one after that with great speed.
4th. The fourth, The last, and the most "SCREWING UP" issue, was GETTING STUCK ON THE WIFI SETTINGS PAGE IN TURNING EITHER ON OR OFF THE WIFI RADIO AND EVENTUALLY FINDING NO NETWORKS on the next ROM (!! ) ; As the phone would start to lag, I mean TREMENDOUS LAG to an extend which it was really hard to resist against getting slept while waiting for a response!!! After LOOOOONG hours of self-mind-eating and asking questions and reading articles and blah blah blah..., finally reached......... NO WHERE! !! (Only a little clue of that it maybe relates to the bootloader) So, something just bumped into my mind, I looked at the bootloader specifications and just realized that the version of the radio was somehow, a little, you know... OUT OF IT! I mean it seemed a little old to me, according to a light little dream of the very start status of my bootloader came across my mind. Thus, I downloaded the latest available Radio, based on ICS from "HERE" (huge thanks to stempox) and the matching RIL from "HERE" (again thanks to stempox) and put them in root of my SD Card, then booted into the bootloader so that the phone would automatically detect the Radio and ask for upgrade or not, then booted into Recovery and flashed the ZIP file relating to the RIL, and re-booted to my ROM. GREAT! IT APPARENTLY WORKED AND STILL IS!! :good::good:
[KEEP THIS IN MIND: CRITERIA FOR "THE LATEST ISSUE" IS FOR S-OFF PHONES ONLY, IF YOU ARE NOT S-OFF, THEN GO HERE DO THE REST ACCORDING TO THE INSTRUCTIONS FOR S-ON BOOTLOADERS.]
--------------------------------------------------------------------------------------------------------------------------------------------------------------
That pretty "Thanks" button's waiting for you, in case I helped

Related

Can't turn on the bluetooth

hello,
unfortunately i cannot turn on the bluetooth from comm manager, it turns on and after 1 second is off again.
any solution for this problem?
thanks.
I have had this problem before and unfortunately am having it again. Only solution I have ever found for this is a hard reset and then reinstalling all your apps. If you try to restore from a backup from Sprite Backup, for instance, the problem remains. This would lead me to believe that it's a setting or a registry issue somewhere but I haven't been able to locate exactly what would be causing it and don't know enough about programming in WM to write something to figure it out.
Not a great answer but there it is.
db
MegaHz said:
hello,
unfortunately i cannot turn on the bluetooth from comm manager, it turns on and after 1 second is off again.
any solution for this problem?
thanks.
Click to expand...
Click to collapse
Hi, I have a Uk version of the touch cruise and I have the same problem. I just did a hard reset but the problem remains. Turning bluetooth on is impossible. It just try's to turn it on and shuts it off immediately.
Maybe it has something to do with GPRS? I am always connected to the internet. I tried to disconnect but then bluetooth still doesn't work. Can anyone help? Thnx!
No one has a clue?
I had this prob with bluetooth and wifi following the use of wmwifirouter- after hard reset and no wmwifi all goes well...
On a French SFR rom
any other idea?
Same problem... beginning to wish I'd gone all Apple and bought an iPhone. Anyway.... To trun it on, I had to go to Comm Manager>Settings>Bluetooth>Mode>Turn on Bluetooth. That worked despite the Comm Manager still showing Bluetooth as "off".
It only connects 1/2 the time to my headset or handsfree in the car
Otherwise, the phone crashes only once a day! Great! Thanks!
ok, great to see more people having the same problem but i hope that someone has a sollution...
When I try to turn bluetooth on in the communications settings i get a message saying there is a hardware error! :S
Ohw btw, I'm not using any router programs or other and my WIFI works fine.
has anybody of you having this problem tried to change to another rom?
if yes? did this worked?
any news on this?
No news, I don't want to try for a different rom because i don't think it will change anything. It just seems like its a faulty device which is a real shame. I've already contacted the place where i bought it and see if i can get a new one.
I also have problems with my microphone during calls, photo camera does often not work and the touchpad reacts very slowly to my touches. Very annoying!!!!
Yup, am returning mine to HTC aswell. Not even sure I want it back. WiFi stopped working too, and then it stopped receiving text messages, and everyone said they couldn't hear me when I called them. Great
Some of you guys got a bad device, there are thousands out there working properly.
If some of you guys flashed a newer Radio, the one form the test-ROM, then this is your problem.
And some of you guys have a quite gay branded ROM (slow responsiveness of touchpad). The original HTC ROM on the FTP and even more so a cooked ROM would solve alot of your problems. But be aware, flashing without having a backup ready is going to void your warranty if you want to exchange it having a custom/non-original ROM on the device.
What's up Schaggo
I am experiencing the same problem these gentlemen are mentioning and my ROM is not gay or lesbian. It is the original one.
TC is my 7th HTC device and I can see the quality of the ROMs decreasing a lot on every new device. I feel like HTC needs a real competitor to move up its arse quicker.
All I can say is that it really annoys me to hard reset this [email protected] everytime I "accidentally" use a native feature called Flight Mode. By bluetooth seems to fly away and never get back.
Lots of time the GPRS settings have to be reconfigured too. Some people I know have problems with GMail IMAP4 accounts when sending messages after some time. I never had this problem on my Kaiser neither on my Niki.
The lack of a video driver really is an egg on our faces, because I can't believe my ole Qtek 9100 responds quicker than these "all the bells and whistles" Qualcomm 7200 super-duper geared up devices.
So, if you feel like not contributing, please do not mess around.
Your signature tells me you are a wise man, but your comments show me otherway.
-Feaps
PB of BT still there with custom rom
MegaHz said:
has anybody of you having this problem tried to change to another rom?
if yes? did this worked?
Click to expand...
Click to collapse
Hi
I've tried many custom rom and the PB continue. "PB with the hardware oh BT".
Hard reset doent change anything.
my initial rom (SFR France) was working
custom rom (blackwidow + Bepe 058) are buging...
nedd some help !
Thanks alot for that input feaps. I guess I have to clarify a little bit.
My answer was supposed to be pointing in different directions. The first and general information I tried to contribute was, that it is not a common Polaris problem to have a broken Bluetooth unit. Which doesn't help at all to ppl affected, but it should tell them, that they probably got a bad device and should exchange it first before blameing htc in general and shouting for an iPhone.
It only was partially directed at specific persons. At madinga for example: did you try hardresetting your device? It could be a corruption in your system which causes all those problems. I doubt it though, if you suffer the loss of so many functions at the same time I suspect the mainboard to be broken. But nonetheless, hardreset it, see if its working, BEFORE you put your backup back on the device again since that could restore the corruption. If it doesnt work, exchange your unit, I hope you'll get a working one back.
My second line was directed at all people which have overwritten their original Radio with the 1.58.25.14 originating from the HTC Test ROM which can be found on the ftp server. The Bluetooth part of that Radio is flawed and leads to the problems described in this thread. I quite nicely pointed that out and told people where to have a look before shouting around. I do know that because I tried it myself and couldnt get my Bluetooth devices working. Once I flashed the original Radio back, my BT problems were gone.
And my third line - in which I may chose the wrong words, 'gay' for example - holds information targeted at people with for example the branded french SFR ROM or the original HTC french ROM. The SFR ROM is just horribly branded and if you go through the threads here you'll find people complaining about problems which then turn out to be related to the ROM. The french HTC ROM is flawed as well, it has severe problems with the volume control. I don't exactly remember what it was, but it's a flawed ROM, thats for sure. The German o2 ROM isnt flawless either, I know that because I originally had that ROM. Once I flashed my orbit 2 with the original HTC WWE ROM, I found it to be working alot better and smoother than with the o2 ROM originally provided. And this is where my last line comes into play: if you suffer problems related to your currently flashed ROM, they could be diminished by flashing an alternative ROM. But if your device is broken, and I personally and strongly believe that everybody fooling around in this forum should be intelligent enough and able to determine the sense of my words, eg. if he/she suffers a ROM problem or if the device just simply is dead and take appropriate actions.
And now to your contribution feaps. I feel personally attacked by your words. Thats why I defended my words in all the paragraphs above. Trust me, I've had enough mobile devices of all sorts to know what it means to get a not working once. Its frustrating and makes you want to throw it out of the window. And being able to see the quality decrease over time is just another drop on a hot stone. I agree. But be honest, if your BT unit works and stopps working once you engage a software based function, the problem is software related, dont you think? As for the GPRS settings, I cant tell. Since I use a free ROM which has the wizard built in (o2 removed it from their ROM) I didnt switch my SIM and the configuration worked, automatically and every single time. And I do use IMAP as well on my personal E-Mail account. Until now I didnt run across any problems, so I cant give you any feedback on that either.
So rethink again if I mess around or not or if I actually try to contribute and help the freshmen, coming into this forum and flashing whatever they find and breaking their devices. And recommending to flash the original HTC ROM, which should be/is the base for everything floating around, breaking your devices, is a serious input to everybody.
Edit: I forgot to add, pointed at nooms, there are cooked ROMs out there which stupidly have the new, flawed Radio baked in. Which Radio are you on? Try Start > Settings > Tab System > Device Information > Tab Version. Are you inadvertedly still on Radio 1.58.25.14 or back to (original) 1.58.21.23?
Hi everyone,
I agree with Schaggo completely. Most of the time problems have something to do with the software on the device. But I a not a tweaker like most of you guys, i've just bought my first (and hopefully not last) HTC phone. If i have problems of some kind, all i can do is reset the thing. A hard reset if necessary. I've done that many times. I can't change the software that comes standard and i don't think i should be the one who has to do that. Shouldnt HTC be doing that??
Anyway, Bluetooth keeps saying it has an hardware error. My radio version is a standard 1.58.21.23 but isnt finding any radiostations here in holland. Is it also broken? (sorry, i know, its a bit off topic)
You're right
schaggo said:
(...)
My answer was supposed to be pointing in different directions.
(...)
And now to your contribution feaps. I feel personally attacked by your words.
(...)
But be honest, if your BT unit works and stopps working once you engage a software based function, the problem is software related, dont you think?
(...)
As for the GPRS settings, I cant tell. Since I use a free ROM which has the wizard built in (o2 removed it from their ROM) I didnt switch my SIM and the configuration worked, automatically and every single time. And I do use IMAP as well on my personal E-Mail account. Until now I didnt run across any problems, so I cant give you any feedback on that either.
(...)
So rethink again if I mess around or not or if I actually try to contribute and help the freshmen, coming into this forum and flashing whatever they find and breaking their devices.
Click to expand...
Click to collapse
Well put. Sorry for being rude, but I keep seeing people offending others day after day in this forum that used to be high level; but that doesn't mean I should act the same way.
I totally misread you and please accept my apologies.
My ROM is: 1.25.405.1 WWE
ROM Date: 12/11/07
Radio Version: 1.58.21.23
Protocol Version: 25.65.30.04H
One thing I could notice is that HTC has a flaw in the Flush HKCU to Permanent Memory While Shutting Down. Some keys are not written.
One example is the MagiCall (an app I use) registration key. The software maker had to write a flush app for doing that. Another example is the Start>Settings>System>Error reporting. No matter what you chose, after a power cycle or a soft reset, it always go back to "Disable...".
I have, also, already tested the device after the hard reset with no extra apps on it. Same lame behavior on BT...
So, SW QA levels are really dropping fast on new HTC models. That is pretty bad.
But anyway, I have an open case with HTC and if I find something contributive I will toch base with this thread.
Once again, sorry for being rude.
Best,
-Feaps
Furio83 said:
Anyway, Bluetooth keeps saying it has an hardware error. My radio version is a standard 1.58.21.23 but isnt finding any radiostations here in holland. Is it also broken? (sorry, i know, its a bit off topic)
Click to expand...
Click to collapse
Then I guess you most probably got a bad unit. I guess the only solution at this time is an exchange.
The Radio-Firmware doesnt control the FM Radio btw The Radio-Firmware controls connections to the providers network, Wireless LAN and Bluetooth. But the FM Radio seems to be really bad in the Polaris, a lot of ppl I know complain about it.
feaps said:
please accept my apologies.
Click to expand...
Click to collapse
No problem dude! There is no need for such an excessive appology. We are in a Forum and people have different oppinions and I think its totally acceptable to shout at each other. I just wanted to express that I'm not in accord regarding your judgement of my post. But thanks a lot, I seriously really appreciate it!
Yes, your device seems pretty standard to me and the scenario you described logically made me think of a software error. But this seems very unlikely now. I'm out of ideas for the moment then, I guess you have to return or exchange it too.
You are perfectly right about the dropping SW QA though. You can notice the registry glitch in other areas as well: backlight timer always reset to 30 sec, and there are more settings all over the place which don't get saved properly.
Again, no problem, everybody lets be cool
Bluetooth doesn't turn on
I have the same problem. Did anyone find a solution?
Also camera fails to initialize, touch pad is sometimes very slow for initial reaction. I have NO added programs beyond manafacturer originals and have tried a number of hard resets. Doesn't help.
Jeremy

Odd GPS issues

OK, so I've dug around the forums and have yet to really find anyone who had a similar issue and wasn't able to fix it with either FasterFix or GPSStatus so thought I'd start a new thread. If anyone knows this answer and knows it's in another thread then let me know and I'll shut this one down...
Anyways, the issue in a nutshell is that Maps refuses to work without "Wireless Networks" being checked (it throws up an error that tells me to turn on My Locations or to turn on either "Wireless Networks" or "GPS satellites" even though GPS sats is checked in the settings) and even then the accuracy is horrible (on tower-based, which is more or less to be expected since it's a triangulation, I believe), Navigation/Locations will both get a location but it appears to be "Wireless Network" based, GPSStatus shows a max of only 3/3 sats even outside on a clear day but no other app sees those even those 3 sats. I basically think my GPS chip is locked up. (Is that even possible?)
The GPS issues started one night on CoreDroid's V5.0 after working for quite some time on CD's various builds, including working on 5.0, so I flashed up to 5.1 and still no-go. Wiped everything, reflashed 5.1 and still nothing. Moved over to RCMixHD 5.9 and it still acts up. It used to be that I could uncheck "Wireless Networks" and it would just bounce off of the GPS sats but now nothing seems to see the chip. I've wiped everything, reflashed numerous times, flashed a new radio (the latest Mar leaked GB radio), gone inside, outside, around the house, around the town, etc etc etc, cleared the Maps cache, uninstalled/reinstalled Maps, reinstalled Locations several times, reset the GPS state with GPS Status, redownloaded the GPS data w/ GPS Status, changed out the gps.spade.so file in CoreDroid 5.0/1 with one from the Inspire Dev Forum (I think, may have been General) that modded files based off of FasterFix files that were supposed to fix the GPS if FasterFix doesnt (the files worked for a whole one test...then everything quit working right again) and I've reset the NTP to North America's server via FasterFix and STILL nothing. I'm getting rather frustrated at this point and any help would be appreciated. Thanks guys!
How about flashing back to stock Rom?
Sent from my calculator
What would the advantage be? I mean I've already flashed different ROMs and gotten the same issue so part of me doesn't care to flash another couple of times but another part of me wonders why it'd help any since it's just going to be overwritten when I flash back to RC or any other custom. Will flashing to stock somehow reset the GPS. I know flashing to stock is generally one of the first suggestions but I've always wondered how it actually helps. Guess I'm off to hunt down the stock on my computer while I wonder lol...thanks
Did you use RUU to get back to stock Rom and radio? RUU does more than just flash the Rom. It flashes the radio to stock. Only reason I'm saying this is cause someone else had Gps issues and when they went to stock unrooted, everything worked as it should.
Sent from my calculator
Do a forum search for inspire RUU. Should come up.
Sent from my calculator
Awesome, thanks. I was unaware that the Inspire had an RUU. Well, most RUU's I've run across have been packaged into a program like ODIN but I think I can do the RUU manually via ADB. Hopefully they have a program out, though. Think all my stock stuff has been done via ADB and the Hack Kit so I'll dig around for an all-in-one program. Thanks!
Sadness...no such luck even on RUU stock.
Just curious, what method did you use to do this?
Is this the same one you used?
http://www.filefactory.com/file/b50...60.19_26.06.04.06_M_release_166557_signed.exe
Sent from my calculator
I have been having similar GPS issues on my stock Inspire. After a long HTC customer service call, I was advised to do a factory reset on the phone. Voila, the problem appears to be solved. I now get 8 or 9 satellites and lock in about 30 seconds. Also, after this reset, my battery life is much better. So, I am not sure what bug I eliminated in the factory reset, but I accomplished something. What would affect both battery and GPS? I know this is not the same as for a rooted phone, but perhaps there is some connection. By the way, just what SNR do users with solid GPS performance get on GPS Test? I never get SNR over 25 on any satellite, whether indoors or out...
HtcOmega,
I helped another person with an inspire, so maybe it might work for you too, Try the link in my sig and see if replacing the gps.conf with one of mine may help you. It has been very successful so far, it might help with your dilema as well. And if your going to ask whats different about mine then fasterfix app, the answer is alot.
Let me know.
AngelDeath said:
HtcOmega,
I helped another person with an inspire, so maybe it might work for you too, Try the link in my sig and see if replacing the gps.conf with one of mine may help you. It has been very successful so far, it might help with your dilema as well. And if your going to ask whats different about mine then fasterfix app, the answer is alot.
Let me know.
Click to expand...
Click to collapse
I was having the same issue as HtcOmega and decided check out your link. I must say that my GPS is working as it should now. Takes at most 30 seconds for a lock without the case on. I flashed the north america zip instead of choosing the north east version. Is there any reason why you wanted people to choose their specific region?
Primarily the reason is I broke up the USA into 6 regions and made a script for 62+ individual countries because I am not using the generic ntp servers from the pool, these are ntp servers specifically for that location, and by narrowing down the location and not using a general ntp it should make lock times faster. If you read the thread for the most part quick reading you will see that the NA script is made primarily for people who travel to many places frequently and do not want to keep changing scripts, as well as people in the common wealth countries would use the NA script.
I am currently testing out 1.2 with a handful of beta testers to see if the new script can be a little more consistent, there are new commands in the new script, which is phase one at least for the HD2 since the HD2 is a prt and lacks the support for true agps.

Wi-FI Hardware or Software | 4.4.2 | S-OFF / [EDIT:SOLVED] IT'S THE HARDWARE

I've been using albinoman887's ROMs for quite a while, moving from 10.1 to 10.2 and finally CM11. Never had an issues. In November I changed to sultanxda's current 4.4.2 ROM and have updated it ever since. Roughly since the late December 2013 updates (I cant recall excactly as I didn't use this phone over this period and my 2,4h Ghz Wlan failed), the Wi-Fi fails to turn on. I have read countless threads, here and elsewhere, and I am sure that this question has been asked many times - yet, despite hours of research I haven't been able to locate the reason.
S-OFF
Hboot 1.27 with juopunutbear's method
currently using
3.0.101-Sultan-kernel-ION-r57
Baseband version 11.76C.3504.00P-11.29A.3504.18M
Bootloader Locked
I have tried
- flashing several different ROMs, from Sense-based to RUU, older albinoman887 and sultanxda's, with and withouth GAPPS and different kernels
- WiFix Manager
- Tried to flash a new radio
I am not entirely sure whether the last bit worked; I followed to guidelines in this thread. The first option didn't work as it said "Remote not allowed" (is that due to my locked bootloader?). The second one with the sd-card showed no errors (actually showed "success"), however the Radio in the fastboot remains unchanged at RADIO-11.29A.3504.18_M (I tried to flash Radio 11.76C.3504.00P_11.29A.3504.18_M)
I have followed the guidelines precisely, although I am pretty sure I do not understand exactly what's happening behind certain commands (and hope not having to do so for getting further with this issue).
I am using teamwin recovery.
I have suspected that perhaps there is a mismatch somewhere along the lines of my radio. GetRIL has reported that RIL/baseband doesn't match, but I am not sure whether I understand what that means.
RIL 4.0.0013HMQ
Baseband 11.76C.3504.00P-11.29.A350
Is it a problem that the baseband in CM11 and GetRIL is shown as 11.76, while in fastboot the Radio is as 11.29 - or are these different things?
Bluetooth is btw working just fine, so is everything else. At one point in time, after wildly flashing several roms I got to the point where it rebooted constantly, however, this seems to be (as far as I can tell) gone.
3G and everything else seems to be working.
RIL/Baseband is meanwhile matching, yet to no avail regarding the WI-FI; it keeps "turning WiFi on..."
I currently have:
RIL 4.0.0024HMQ
Baseand 11.72.3504.00P-11.23.3504 ;
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
Dear filosofem
thanks for the quick reply. I followed the instructions, then went into my current ROM (one using 3.4.10-SebastianFM-1.0.3 Kernel) and the WI-Fi is still trying to turn on constantly.
Wiped cache and dalvik (and everything else excepct SD card) and installed the latest sultanxda ROM, in the following order:
1. Kernel Aroma Installer, 2. ROM (cm-11-20140217-Sultan-pyramid.zip); 3. mini-GAPPS - yet the problem persists.
htc-sen said:
Dear filosofem
thanks for the quick reply. I followed the instructions, then went into my current ROM (one using 3.4.10-SebastianFM-1.0.3 Kernel) and the WI-Fi is still trying to turn on constantly.
Wiped cache and dalvik (and everything else excepct SD card) and installed the latest sultanxda ROM, in the following order:
1. Kernel Aroma Installer, 2. ROM (cm-11-20140217-Sultan-pyramid.zip); 3. mini-GAPPS - yet the problem persists.
Click to expand...
Click to collapse
try this my metaller mate
go to system->etc->wifi and delete the wpa_supplicant.conf. file
first back it up in your sdcard just in case
see how it goes
Unfortunately I forgot to mention in the first post that I have tried this method as well. I have also deleted the entire "wifi" folder where the supplicant file is stored (as suggested in one of many threads as a workaround)
Edit: Managed to get the supplicant file deleted again after the firmwire update to 3.33, yet again to no avail.
did you try to change WiFi region code ? you can change it by pressing settings button while in wifi, choose advance and change it over
Yes, I have tried that with the WiFix app, but also manually. Manually at least it doesn't stick to either Germany or Europe - although I am not sure whether this should really make a difference in not turning on at all. Isn't the main difference that the US merely uses additional channels that routers in Europe may not allow?
I cannot scan for networks since I don't even get there; the rest of the Advanced Wi-Fi settings will be saved, but not the region code (it states "specify the region code for Wi-Fi" every time I enter, no matter what I've selected before).
I have also ordered a new back cover, since afaik that houses the antenna, although I remain doubtful that this will work. Or does anyone think it could be worth a shot if its a hardware issue? Or would a hardware issue rather affect another part; i.e. a connector or a cable?
htc-sen said:
Yes, I have tried that with the WiFix app, but also manually. Manually at least it doesn't stick to either Germany or Europe - although I am not sure whether this should really make a difference in not turning on at all. Isn't the main difference that the US merely uses additional channels that routers in Europe may not allow?
I cannot scan for networks since I don't even get there; the rest of the Advanced Wi-Fi settings will be saved, but not the region code (it states "specify the region code for Wi-Fi" every time I enter, no matter what I've selected before).
I have also ordered a new back cover, since afaik that houses the antenna, although I remain doubtful that this will work. Or does anyone think it could be worth a shot if its a hardware issue? Or would a hardware issue rather affect another part; i.e. a connector or a cable?
Click to expand...
Click to collapse
can I say I had the same exact problem updated to kitkat "4.4.2" and my wifi n Bluetooth was killed just like how u explained n i read all thread on google, one method i haven't tried is pulling the phone apart n clean it .......
Thanks to everybody for the many suggestions - It seems, at least for me, that the problem has clearly been hardware-related. So many hours flashing countless of ROMS and yet the solutions was probably somewhere in the antenna. Today I received a new cover and after a reboot WiFi returned as normal.
I would therefore advice everyone who is in the same position (and judging by the many forum posts, it is quite common) to first try a new cover. I ordered mine for 17€ from amazon (and had it not worked, I could have returned it).
htc-sen said:
Thanks to everybody for the many suggestions - It seems, at least for me, that the problem has clearly been hardware-related. So many hours flashing countless of ROMS and yet the solutions was probably somewhere in the antenna. Today I received a new cover and after a reboot WiFi returned as normal.
I would therefore advice everyone who is in the same position (and judging by the many forum posts, it is quite common) to first try a new cover. I ordered mine for 17€ from amazon (and had it not worked, I could have returned it).
Click to expand...
Click to collapse
Hey, i had the same problem as you and for some reason as soon as i remove the back cover my wifi problem was fixed. Mine fixed it self over time
But then withouth a back cover you would only have a small percent of both network and Wi-Fi coverage (if you were lucky to get any at all), wouldn't you?
htc-sen said:
But then withouth a back cover you would only have a small percent of both network and Wi-Fi coverage (if you were lucky to get any at all), wouldn't you?
Click to expand...
Click to collapse
No, you misunderstood me. What i did to fix it was basically remove the back cover which gave me signal instantaneously and then i placed my finger on the gold thing ( the one above the camera) and this boosted my signal to max and then i put my case back on and my wifi was fixed for about 30 mins. Each and every time the time limit increased and one day later my wifi stopped disconnecting.

Blaze Signal Keeps Going Out Problem(On Any ROM!)

So here's my issue, my Galaxy S Blaze has been switched from ROM to ROM constantly, I have seen ROMS with modified build.props, other added features, and a bunch of other tweaks, you name it! I don't know what all those tweaks mean, I have no idea if it could affect the way my phone receives the signal but it got me so frustrated that I kept switching roms until finally then I went back to stock and am no longer am switching to another ROM.
Here's a history of the ROM switching I've made in the past couple of months:
1st - MIUI
2nd- Cyanogenmod
3rd- Gummy ROM
4th- Liquidsmooth ROM
5th- Cyanogenmod
6th- Dirty Unicorns (problems with signal started occurring right about here, and onwards)
7th- Stock ROM (hmm... nope nothing fixed.)
8th- Validus (still no, I didn't like the constant force-closing of many apps)
9th- Gummy ROM (nope, what's worse is my screen kept freezing if I had atleast 2 apps open and I slid down the notification drawer)
10th- Cyanogenmod (well, maybe switching to cyanogenmod will fix it)
11th- Gummy ROM (*sigh* switching back? Nope, still didn't help my signal)
12th- Stock ROM (you would expect it to be fixed right about here, but nope)
So what's up what is the exact problem with my signal? Here's the thing: My signal works! That's a start atleast. However, if I turn on my Wi-Fi while I'm home, I can still call/text people, all of that works. But after maybe 2 hours or so, the signal bar is still there, it's telling me it has signal and it's connected, SOMETIMES it will be empty meaning I have no signal(when I really do). But in reality, I can't receive texts, nor calls, none of that. So how do I fix it? By restarting my phone sadly, that has been the only solution for me for these past 2 months. People have complained to me because I don't answer my phone anymore, well I'm sorry my phone can't receive those calls due to this messed up signal. There are 3 other T-Mobile phones in the house that have no problem! The problem here is with my Blaze phone.
So what if I turn the Wi-Fi off for the whole day and see if it's the main thing causing the issue? Well, I did this. Turns out that the signal stays on longer than when I'm on Wi-Fi but it still goes out. I have switched SIM Cards, I have tried switching my APN: from "epc.tmobile.com" to "fast.t-mobile.com" but the problem appears to happen more quickly on the "epc" one than the "fast" one. Please help me with this, this has been frustrating me a lot lately. I'm not sure if anyone has even had the same exact problem that I'm having, I've searched online but haven't seen a similar problem.
Some of you might say, wow that is a lot of ROMS you've switched to, I'm sure there were more that I missed but that's as of recent. I can install ROMS correctly, I know how to use CWM when installing a .zip and using Odin when it's a .tar(or other supported file extensions). I've factory reset, wiped the cache, the dalvik cache, all before installing a new rom. After installing each rom, I've also factory reset and wiped the cache to make sure no other problems could affect the way the rom would work. Hopefully I did the procedure right, thanks for anyone who's willing to help me!
Right now I am running:
Baseband Version:
T769UVLH5
Kernel Version:
3.0.8-perf-T769UVLH5-CL990184
[email protected] #1
SMP PREEMPT Fri Aug 17 15:12:14 KST 2012
Android Version:
4.0.4
Another Issue is that I can't even transfer files to and from my phone when connected to my computer! This is another big issue, here are some images:
http :// i.imgur.com/xx699ss.png
http :// i.imgur.com/1wRzJpX.png
Here's what happens when I turn Wi-Fi Calling on but maybe it's just a built-in function that I forgot it had and it's probably normal:
http :// i.imgur.com/cTSqRci.png
By the way, sorry for the links just copy and paste them in a browser to and remove the spaces between the http :// and i.imgur, thanks! Unfortunately, I can't post links until I reach 10 posts. If the links don't work for you, I've also provided attachments.
Many thanks!!!
That last picture does show the proper function of Wi-Fi calling however I don't know what to say about the rest of your problems.
Sent from my SAMSUNG-SGH-T769 using XDA Free mobile app
There are two things I would recommend trying...
1. Use Blackhole System Wipe
I know you've been following all the proper steps in CWM (and I would say to keep doing so), but I've added using Blackhole, in addition to the first steps, and I always get great system performance on my phone, and my parent's phones (I put them on ProvisionMod after stock was being stupid). It works well for pre installation for ANY ROM and helps prevent pesky issues. However, chances are, your issue is baseband related and this probably won't solve it... But still! You never know! It's worth a shot!
2. Reroot your phone
I know this will be annoying and pesky... but sometimes the process goes wrong from the beginning and starts giving issues later on... When I first rooted my mom's blaze, something went wrong, despite my following all the directions, and one of her partitions was completely disabled, no matter the ROM. I redid the process of rooting her phone (not from GB though... From the ICS stock) and fixed the issue instantly! I would try these two steps first and see if they do anything! Good luck!
Sent from The Doctor's Blaze

[Q&A] [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart

Q&A for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
no sound, no auto-rotate
I am fairly new to Rooting and updating my Xoom to the newest Kitkat system. I am having 2 issues as of right now. The sound has never worked no matter what the settings say, and initially the auto-rotate was functioning and suddenly it stopped.
I have checked all options/setting and see nothing that should explain either of these 2 issues. I also didnt add any new apps in the time from initial update to the auto-rotate not working so if anyone has any suggestions or ideas, it would be greatly appreciated.
Again I am fairly new to all this, so the simpler or more detailed the potential solution the more likely I will understand it.
Thanks.
No sound on Omni 4.4 cmda version
I love the rom, only problem is I have no sound on the cmda version. I read the comments and saw people suggest install the top rom version over the bottom and then reflashing gapps. Should have sound. When I do this tablet boots but keeps giving me error "Unfortunately, the process com.android.phone has stopped" I say ok but it keeps coming up and wont let me get any further. Any suggestions?
volume issue
Anyone know how to fix the no sound issue in omni rom 4.4.4 stingray cdma? I cant get any sound at all. Help would be appreciated.
Took a couple go's but now up and running 4.4.2!
Thank you!
First time I've moved from the standard stock implementation, never even rooted the device before, but a couple attempts and following your instructions I managed to install BigPart, Flash omni-4.4.2-201XXXXX-everest-HOMEMADE_XXXX.zip, gapps-xxxx.zip & UPDATE-SuperSU-v1.86.zip.
I was about to give up on the Xoom and buy something newer, Tab S or something, but this appears to have put new life back into the old Xoom!
Followed the instructions above, but could not get it to clear Dalvik, failed every time. In the end I bit the bullet and formatted the internal drive, then flashed again - worked like a charm - figured since I was going to pass it over for a new one or this was going to work I had little to lose. As it happens I now seem to have it back & working well.
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Blackdogn3 said:
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Click to expand...
Click to collapse
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
slow1234 said:
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
Click to expand...
Click to collapse
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Blackdogn3 said:
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Click to expand...
Click to collapse
It has also been noted that 9.2.0 is rolling out and that it works on the Xoom. I updated yesterday and did a quick check - it does appear to work fine!
No Sound
After I flashed "[ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart." onto my Verizon Motorola Xoom 4G Tablet,
I have no sound at all and also the auto-rotate feature does not work (stays locked in portrait mode until reboot).
A number of other forum members have posted the same problem. Can we get a solution from someone on the forum?
have all but twrp v 2.6.3 big part
I have every thing I need except big part v2.6.3, none of the links I've found work? Does it have to be v2.6..3. ? There seem to be updated versions?
No 3g or 1x fallback
Install this today, everything went ok, execpt i could not get verizon 3g or 1x service. 4g works fine, when i have coverage. SBF back to stock again i guess.
e:unable to mount '/cache
The process for flashing the xoom (stingray model) seems somewhat straightforward. Yet I can't seem to get a working flash from the effort. Two problems:
1) during the "wipe this and that" stage while running in recovery, I get "FAILED" for each of the requisite areas to wipe, along with other messages such as that in the title. while i find a handful of other posts within this forum from folks experiencing the same problem, i find nothing in response with useful suggestions to fix what's apparently broken;
2) the tablet boots up to the OMNI splash-screen, and that's it.
I've repeated the steps at the head of this thread umpteen-zillion times. But the result is the same after each attempt. Either some critical step (or two) is/are missing from the initial (and horribly written) description, or I have the most stubborn tablet built.
i haven't bricked the thing... i can access it via adb, and i can get into recovery with no issues. what i can't seem to do is:
1) find a TWRP download using the links provided that doesn't trip quarantine due to virus detection; or,
2) find a coherent set of instructions that correctly describe the logical flow of the process of flashing a ROM on a Xoom.
Suggestions?
CDMA Voice and data programming
Hi,
Thanks for your effort and excellent work but I need some help, The main thing i want to try, is to get back my CDMA signal because since i tried the stock rom 4.1.2 i was not able to get any Data working there, my xoom is a just CDMA with no sim or LTE upgrade and i already tried 2 basebands on it the one with the last version of the stock room and the one that gets installed with the IMML update but no luck, if by any chance you have the first baseband it would be great i guess its something like 2.00.
Another question that I have is related to BP tools or programming the Cdma xoom, every time I try to start in bp tools I was not able to see the utility, just today i tried to connect to my PC and its not able to connect to CDMA Workshop or QPST, is there a way to do that? i need to activate something? any idea would be great!
And would be great if you have any MZ600 SBF where has included the first baseband 2.00 'cause probably it will help me to recover my 3g data (it's the only thing i didn't find and try).
Thanks!!!
is this have a default calling future like any mobile?
Thank You to OmniRom for xoom devolopers (all of you)
I just wanted to post a thank you to all of the developers of the omnirom for xoom. I was able to install it tonight, with a couple soft brick scares, but it is up and ruining. I love my xoom and am very appreciative.
Thanks....Steve
Xoom OnmiROM freezes
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
semi-anonymous said:
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
Click to expand...
Click to collapse
It's not real common for this to happen, but this same issue does occasionally happen on the CyanogenMod 11 Rom also. Other than this, and the workarounds to do a few other things in Android 4.4.4, the Xoom has been a real God send that is just amazing.
Non-Functioning Sensors post-flash w/Omni Stingray
Finished flashing XOOM 4G with (in order listed):
Xoom-Universal-Root
R.A.H._TWRPv2.6.3
omni-4.4.4-20141130-1816+0100-stingray_cdma-HOMEMADE
pa_gapps-modular-pico-4.4.4-20150215-signed
UPDATE-SuperSU-v2.45
After I noticed that the auto-rotate didn't work, I downloaded "My Android Sensors" from the Play Store. It shows the NO sensor is working. What gives..?
Looking for file EOS-Stingray-imm76l-radios-update.zip
Hi all,
Can someone help with the file ?
EOS-Stingray-imm76l-radios-update.zip
Thank you
The Rom works great.
I installed it month ago and it is working fine.
Batterylife is perfect and all things are working.
Thanks

Categories

Resources