Ok noob alert..just a prelude I've done alot of searching and reading, and *think I have some answers, but if some kind soul were to take a quick look and maybe verify what I've found, I'd be eternally grateful. I used to have a LG Optimus and easily rooted/upgraded to CM7 by reading this forum and didn't have to ask any questions.
Now I've gone and signed up for WIND (Canada) and picked up an XT720. It's my budget and I'm not overly concerned about whether or not I have ICS immediately. I'd rather have something stable and $$ saving.
OK so I'm noticing a serious difference in the way the XT720 handles the WIFI/mobile data situation compared to the LG: it doesn't. First off, there's no easy way to turn off mobile data. Secondly, enabling WIFI gets me a connection to my router, yes, but browsers and apps that require a connection just refuse to use the WIFI unless: 1. there is 3G data connection - in other words, it ain't using WIFI 2. I put the phone in Airplane Mode, and turn WIFI back on. Great, but now no phone calls or SMS. Not a viable workaround. Option 3 involves hard resetting the phone with a battery pull which sometimes works and sometimes doesn't.
From scouring around various sites, this seems to have been a common problem with 2.1 and this model of phone. And thus the workarounds I tried were also employed by others.
From what I know of all versions custom ROMs etc from 2.2 onward for other models of phones, though, this wasn't an issue, and also in 2.2 and onward you can switch off Mobile Data which will force the WIFI connection if turned on.
So is this something that I will see an improvement on if I install say CM 6.3 onward or whatever? I'll get the ability to turn off mobile data, right? And then there theoretically shouldn't be a conflict, right?
That's my biggest issue. I don't get enough 3G signal in my house to just use the mobile data connection, I absolutely have to be able to use WIFI and receive phone calls/texts at the same time, so if custom roms aren't going to help me, I'd best return the phone.
Some other things I'm curious about:
- do most of the normal functions of the phone work with CM 6.3? HD recording, camera, HDMI out etc? Anything I've missed?
- I see quite a bit of talk about people running out of RAM and using sd swapping etc is this a common problem? Even with about 20 or so apps and CM7 on my LG Optimus I was still able to maintain about 110 mb RAM free at all times by judicious use of installing apps on SD card...will I be ok?
- Probably the biggest question before I root/install...most of the guides I'm reading talk about installing various stock sbfs etc etc...I'm coming in from a WIND stock rom so I don't *THINK* I need to do this, right? I should be nandroid'ing, Open Recovery, flash custom rom....right?
Here's my specs
Xt720 Wind Canada
s/w STR_U2_05.1F.2
f/w 2.1-update1
f/w config GAS_NA_NAWIND_P012
Baseband 3GSMEPU91A_U_91.075EI
kernel 2.6.29-omap1
I realize that some of this is covered in other threads. To be honest tho some respondents/contributors aren't English first language and I just want to make sure I haven't misunderstood anything. Anyone who has done similar to what I'm trying to do, especially coming from a WIND perspective, lemme know your thoughts, please and thanks alot!
acrobat69 said:
Now I've gone and signed up for WIND (Canada) and picked up an XT720. It's my budget and I'm not overly concerned about whether or not I have ICS immediately. I'd rather have something stable and $$ saving.
Click to expand...
Click to collapse
I've picked up the XT720 myself from Wind a few days ago at the clearance price ($150 outright, no plan). They even told me there are no guarantees with the phone with its stock ROM and seemed glad to hear that I was gonna use it with a custom ROM. I knew what I was getting into and the only reason I still bought the phone is this:
http://forum.xda-developers.com/showthread.php?t=1300246
We are extremely lucky to get Gingearbread on our phones, so don't even think of ICS at this moment. As you noticed already the stock 2.1 is useless and I flashed mine the 1st day.
acrobat69 said:
That's my biggest issue. I don't get enough 3G signal in my house to just use the mobile data connection, I absolutely have to be able to use WIFI and receive phone calls/texts at the same time, so if custom roms aren't going to help me, I'd best return the phone.
Click to expand...
Click to collapse
The ROM I linked above (the only 2.3, actually CM 7.1 available for XT720) works as you'd expect with wifi and 3g, that is it uses wifi when connected to both. Any decent ROM will do that.
acrobat69 said:
- do most of the normal functions of the phone work with CM 6.3? HD recording, camera, HDMI out etc? Anything I've missed?
Click to expand...
Click to collapse
HD recording - not yet (you don't lose much anyway, the camcorder quality would be crappy, check reviews with the stock OS)
camera - yes (pretty good quality)
HDMI - not yet (I'm guessing it will be fixed very soon, the devs are working on exactly this)
everything else - yes
acrobat69 said:
- I see quite a bit of talk about people running out of RAM and using sd swapping etc is this a common problem? Even with about 20 or so apps and CM7 on my LG Optimus I was still able to maintain about 110 mb RAM free at all times by judicious use of installing apps on SD card...will I be ok?
Click to expand...
Click to collapse
This one is tricky, the phone only has about 225mb usable RAM, there's not much multi-tasking you can do with that amount but it's workable. There are some performance tweaks you can do (overclocking, CM settings, V6 SuperCharger, etc.) to make it decent. Moving apps on sd card is a good idea in order to save storage space on the phone (another limited resource at only 174mb) but has nothing to do with RAM.
acrobat69 said:
- Probably the biggest question before I root/install...most of the guides I'm reading talk about installing various stock sbfs etc etc...I'm coming in from a WIND stock rom so I don't *THINK* I need to do this, right? I should be nandroid'ing, Open Recovery, flash custom rom....right?
Click to expand...
Click to collapse
I've been wondering the same thing, what's up with all the SBFs people are talking about left and right? The answer is don't worry about them, you don't need any SBF. They are just that, stock ROMs, all 2.1. You would only need one (the Wind version) if you wanted to take the phone back for servicing and wanted to return to the original non-rooted state. Apparently even if you take a full nandroid backup with your stock ROM now and restore it later, the phone will still be rooted and this is where a stock SBF would help. I'm not gonna bother, even if I do take it back (highly doubt it, with the custom ROM it's a very good phone for $150 outright), I'm just gonna restore my stock nandroid backup.
So what you need is:
1. root the phone (personally I used SuperOneClick, google for the latest version)
2. install OpenRecovery: http://modmymobile.com/forums/563-m.../531599-open-recovery-v1-46-11-21-2010-a.html
I can send you the file you need if you pm your email address. I HATE it when I have to register on some forum just to get 1 stupid file. And you absolutely CANNOT get that stupid file anywhere else on the face of the Earth/internet.
3. install this mod for OpenRecovery: http://forum.xda-developers.com/showthread.php?t=1242259
4. go to the ROM's thread, dl the latest build linked in the 1st post, copy the zip file to your sdcard\openrecovery\updates, reboot into recovery mode, apply update, format data&cache, reboot. Done. Enjoy!
BuddyBud said:
2. install OpenRecovery: http://modmymobile.com/forums/563-m.../531599-open-recovery-v1-46-11-21-2010-a.html
I can send you the file you need if you pm your email address. I HATE it when I have to register on some forum just to get 1 stupid file. And you absolutely CANNOT get that stupid file anywhere else on the face of the Earth/internet.
Click to expand...
Click to collapse
There's an OpenRecovery apk floating around here to install ther OR bootstrap, no need to register at ModMyMobile.
:Edit:
Woodrube has it attached to this thread. Install the apk from the sdcard, reboot, then run the apk & install OR. (Now you can switch out the OR files with Mioze's modded OR)
here you go
I knew that thread would come in handy one of these days. Plus Buddy and Acro there are other handy APKs in there too.
Mioze actually have all the necessary Open Recovery files linked in his CM6.3 topic
that's the most updated version
THANK YOU THANK YOU THANK YOU to James and everyone who has responded so far - even going so far as to direct link me to files I'll need? You guys are the best!!.
I really appreciate the encouragement. I think tonight's the night.
I'll try and log my procedures and steps and make note of anything I run into for future noobs like me I might be able to help..that's how community works, right?
Wish me luck!
Good luck
One more tip: If you find that Market keeps crashing after you flash fjfalcon's ROM, flash this updated Google Apps package - gapps-gb-20111216 (dl link here).
It worked for me. Put the zip file on the sdcard right next to the ROM file and flash it just like the ROM file.
PS: Who's James?
Ah BuddyBud sorry, there is another Canadian Wind guy named Biker Bob (real name James) who was posting about his experiences in another thread, and I mixed the two of you up..
About to try this...couple questions
Has anyone watched/used Reverend's tutorial video? Results?
I don't need to unlock the phone first, right? Please tell me no, I just got it! lol
The Revs videos are a good reference & if you are talking about a sim unlock that's not necessary.
Yes Revs videos are good to show.a visual of what you should do. Don't worry about it. I know it is scary the first time but once you do it, it will become second nature. Don't forget to wipe cache, dalvik and factory reset. If you bootloop, that is probably why.
No you don't need to be unlocked. That just deals with carriers and not ROMs.
Im on the edge of the decision precipice..am not too nervous about doing this, as in fact I'm pretty technically proficient..it just seemed that this process was a bit more convoluted than the one I picked up on easily for the LG.
Decisions decisions...6.3 or go all the way to 7.1
I think I need stability...and I'm not sure I want to get into a whole bunch of swapping locations etc. I noticed The Reverend mentioned he didn't bother with swaps. Mind you, I don't even think he made an ext partition either, which boggles my mind, I was almost sure you had to make at least one for any custom ROM. I might be showing just how little I know here! lol
Is it just that 7.1 is more of an ongoing thing, or by now are most of the +/- s of both pretty much on par? I know, I should be reading all 78 pages of the damn thread, right??
Oh boy, I just read through the Bravo thread...and the LED notification sounds SOOO tempting. No LED notification bugged the hell outta me on the LG. Hmmmm...
Ok...have settled on the ROM in this thread (Bravo):
http://forum.xda-developers.com/showthread.php?t=1332410
I just want to make sure of one thing...the VERY helpful steps that you all have outlined ie BuddyBuds...they stay the same up to step 4 (ROM + update) no matter what ROM I choose, pretty much.
Brians instructions are just a slight bit confusing in that Im not sure if I have to apply just the most recent update for LED ie v1.6...or if I have to install ALL the updates from the start on up (I think there are 4 of them). To me it would seem logical that each new version would be cumulative ie include the stuff from previous versions...but I just want to make sure!
One more thing..I didnt notice any mention of gapps in the download in that thread (nor did I see a gapps apk in the files I unzipped, but might have missed it..)...if not, Ill need to apply that too, right..any special version to useÉ
Ok so...
I went with Brian's BRAVO. I followed some of the steps provided in this thread, coupled with Reverand's video. I used his OpenRecovery install method (ie original from the Dexter build, copy new over top that) because I've never installed OpenRecovery before and it just seemed confusing on other threads.
To root, I used UltimateAndroot, in order to have the ability to unroot the machine (you'll see why...)
The first thing I checked, of course, was the pull down power/status bar to see about turning off various connections (ie Wifi, Bluetooth, Refresh, Mobile Data, etc). Unlike other 2.2 Froyo's I've used, specifically..LG..there is no pull down/status bar. Damn. Went thru every Setting imaginable, but won't work. This isn't looking great.
Next thing I tested was my 3G/Wifi issue. To my dismay...the issue remains. Browser and apps are still trying to use 3G first and foremost, as far as I can see. How do I know? Because if I leave Data Network Settting to "Allowed", browser/apps work, and *seem to be using the WiFi, but the second the 3G signal fades or is dropped, I get connection issues, and WiFi is still on. If I turn Data Network Setting to "Not Allowed", it might/might not use the WiFi for a bit and then pretty consistently stop. When I mean "stop", I mean the phone is still showing connected to WiFi yet there are data connection errors on all browsers/apps that need data etc. Sometimes, if the 3G signal returns, I get the pop-up asking me to Allow the data, and if I say yes it works for a bit (but then, because of the 3G signal issue, it cuts out again).
The fix - again - turn on Airplane mode, which disconnects all connections, turn on WiFi, then go back into Call Settings and search for the Home Network again. This is crazy, I can't do this every time, and eventually it craps out again and I have to do it all over.
The other really frustrating thing is I powered it down to do a full recharge overnight...when I booted back up it didn't find my Home Network at all and I had to rescan for it. Testing that out, sure enough, rebooting the phone I have to reselect the Network. Argh.
Any thoughts? The whole necessity of being able to turn 3G data off is so I can avoid this very problem. Basically, I walk in my front door, turn off data over the mobile network, and let my WiFi do it all while I'm home. I wish I could do this as effectively as with my LG on 2.2 (and later, CM7)
acrobat69 said:
Ok...have settled on the ROM in this thread (Bravo):
http://forum.xda-developers.com/showthread.php?t=1332410
I just want to make sure of one thing...the VERY helpful steps that you all have outlined ie BuddyBuds...they stay the same up to step 4 (ROM + update) no matter what ROM I choose, pretty much.
Click to expand...
Click to collapse
Once you get to step 4 inn Buddy's list check out this. It will explain it a little bit better. Brought someone back from the brink on this thread. Where is says Dexter, just replace that with Bravo.
Brians instructions are just a slight bit confusing in that Im not sure if I have to apply just the most recent update for LED ie v1.6...or if I have to install ALL the updates from the start on up (I think there are 4 of them). To me it would seem logical that each new version would be cumulative ie include the stuff from previous versions...but I just want to make sure!
Click to expand...
Click to collapse
Per Brian's OP the v1.9 has all the patches.
v1.9,A new Nandroid IMG backup,All patches included(20111217).
Click to expand...
Click to collapse
One more thing..I didnt notice any mention of gapps in the download in that thread (nor did I see a gapps apk in the files I unzipped, but might have missed it..)...if not, Ill need to apply that too, right..any special version to useÉ
Click to expand...
Click to collapse
Gapps is for CM builds. Bravo is a 2.2 build.
Side note: If you are going to partition it is up to you. I and a few other don't but it is really a personal preference. When I did, I used MiniTool Partition Wizard and it worked like a charm.
A few things though:
1: Your partitions must be set up this way---> Fat then EXT2/3 then Swap (if you choose-I don't and never did-requires you to fastboot a custom kernel and since this is your first experience, I would not suggest it)
2: Sizes. Many noobs will set their EXT2/3 partition to 1gb. That is way too big and you are just wasting space. I find that somewhere between 350-400mb is more than enough.
3: Do not convert your Ext partition to EXT4 unless the ROM you choose supports it. If/when the time comes, use MZ's open recovery utility to do it and not GPArted or MiniTool. The creat a Hugefile that has to be deleted and is a PITA.
4: If you do decide to partition, you will have to boot up fully, then go into your root explorer and in the SD-ext, you will need to create a folder called App (not apps-no S) so it will look like this sdcard/sdext/app. Then reboot and your apps will auto-install there.
Sorry for the long post and good luck.
---------- Post added at 11:30 AM ---------- Previous post was at 10:42 AM ----------
acrobat69 said:
Any thoughts? The whole necessity of being able to turn 3G data off is so I can avoid this very problem. Basically, I walk in my front door, turn off data over the mobile network, and let my WiFi do it all while I'm home. I wish I could do this as effectively as with my LG on 2.2 (and later, CM7)
Click to expand...
Click to collapse
Once you click on WIFI it should take over as your primary source of data. Not sure why unless I think I might have figured it out. Go into settings>wireless>tick your WIFI and once your router pops up leave it alone and hit your menu button. Set your WIFI sleep policy to NEVER and I bet that takes care of it. Pretty sure that is toggling off your WIFI when 3g is present.
Other solution is Widgetsoid and Elixir both have a widget to toggle off data (so does Beautiful widgets too for that matter). You can use those but I really think the above solution should work for you.
Woodrube said:
Per Brian's OP the v1.9 has all the patches.
Click to expand...
Click to collapse
Ah, figured..however when I go into LED Notification, it says "revision 1.6" (or some wording to that effect) at the bottom. Maybe that's just an error, but I just used that to gauge whether or not I had installed the latest revisions etc.
LED Notification works for text messages. I haven't seen it work for calls yet, but maybe I'm doing something wrong. I call the phone, the screen lights up that there's a call, and then ultimately closes when noone answers it. It was at this point that I'd assume the LED notification would come on. Screen is out, so LED, right?
Woodrube said:
Gapps is for CM builds. Bravo is a 2.2 build.
Click to expand...
Click to collapse
Ok I guess I goofed then, because I tried to update with Gapps after I installed Bravo. One thing I noticed is that I wasn't prompted to sign up/into my Google accounts or set up the phone when I rebooted following the Bravo ROM + Gapps install..that had always happened on my LG when I did CM installs...your explanation makes sense!
But...isn't CM6 basically 2.2 and Bravo basically 2.2? Or maybe I misread that.
At any rate, the real reason I updated Gapps is because I wanted the "new" Market look. I don't like the old one very much, really like the My Apps function. Is there way I can just patch this in to Bravo?
Woodrube said:
Side note: If you are going to partition it is up to you. I and a few other don't but it is really a personal preference.
Click to expand...
Click to collapse
Why do people partition? I did it on my LG, but never used it. Partitioning has nothing to do with installing user apps to the SD card, right? I can do that anyways, true?
Speaking of which..in CM there is the ability to set the default install location. I searched to find something similar in Bravo, to no avail. Is there a way to do this?
Wait...I think you just gave me the answer to both these questions...duh me..
Woodrube said:
4: If you do decide to partition, you will have to boot up fully, then go into your root explorer and in the SD-ext, you will need to create a folder called App (not apps-no S) so it will look like this sdcard/sdext/app. Then reboot and your apps will auto-install there.
Click to expand...
Click to collapse
I guess I do in fact want to partition, then. I can't imagine how one wouldn't want to, I mean you don't want apps clogging up internal memory, right?
Woodrube said:
Sorry for the long post and good luck.
Click to expand...
Click to collapse
Never apologize for long posts...I'm the worst at it and I love pouring over every single last detail. I'm sure there are lurkers who appreciate also, I know I really did when learning on my LG. Thanks a million!!
Woodrube said:
Once you click on WIFI it should take over as your primary source of data. Not sure why unless I think I might have figured it out. Go into settings>wireless>tick your WIFI and once your router pops up leave it alone and hit your menu button. Set your WIFI sleep policy to NEVER and I bet that takes care of it. Pretty sure that is toggling off your WIFI when 3g is present.
Other solution is Widgetsoid and Elixir both have a widget to toggle off data (so does Beautiful widgets too for that matter). You can use those but I really think the above solution should work for you.
Click to expand...
Click to collapse
DOHHHHH!!!! I knew I had forgotten something about past settings that made my LG work so well.. I have modified the Wi-Fi sleep policy and hopefully it will work better now! One constant in all the issues I was having, now that you've mentioned this, is that the screen was sleeping/timing out while things were going on. I'd bring it back up, and be all "like, wtf" when my browser wouldn't work or apps that were downloading hung, etc. Mind you, it probably should have reconnected by itself, but whatever, if it doesn't, there's no harm in using Never Sleep for WiFi. I'm not that much of a stickler for battery usage. I go to bed, I charge the phone, I wake up, repeat. I don't need 4 days battery life and if I ever am in a situation where I do, I'm camping or somewhere remote ie no WiFi hence this doesn't apply as I'd just toggle WiFi off completely anyways.
You're right, I could use a Widget to manage my connections and I managed to grab Beautiful when it was 10 cents..but those reside on the screen and I would love to get that pull-down bar back, just so handy to drag down no matter what app/screen you're in...I know, I'm picky
You know what? I got a Notification Toggle app on my PC at home that I'll upload here tonight. I just remembered it while I was at lunch. It is from an older ROM so not sure it will work but worth a try. Usual directions. Push it to /system/apps reboot. It should be just what you are looking for if it works. Might not though so you'll just have to see.
CM6 is 2.2 and so is Bravo only Bravo was made from the official Korean update that was handed down and Mioze has created the CM6 from source. So yes they are both 2.2 but very different.
Edit: I have the latest Market.apk too. It is floating around here somewhere but I can't find in for some reason. I'll upload them tonight.
acrobat69 said:
Decisions decisions...6.3 or go all the way to 7.1
Click to expand...
Click to collapse
try them both first, then see which one you want to use as your daily driver.
i personally like the 6.3 better because it runs the fastest even on stock speed 720 Mhz
you can use Open Recovery to do a full backup, and switch back and forth between 7.1 and 6.3 until you decide which one you like best
7.1 has more themes to choose from and is more up to date, but... less free resources vs. 6.3 which is indirectly related to why it feels less quick than 6.3
7.1 feels similar to the speed you get on the stock ROM from Wind, 6.3 feels like a brand new device
I followed directions to wipe everything as suggested in this post:
http://forum.xda-developers.com/showpost.php?p=20485148&postcount=146
Was using Alfa 13 just fine, but on Alfa 17 I can not get cellular data to work. Confirmed my WAP settings are correct for my carrier.
My baseband it says its a i9020xxkf1 and everything else on the phone works. I can access the market, wifi works, account sync if i have wifi on. I have doubled checked every possible setting. But it will not bring up a data connection over the cellular radio. It even takes calls over the radio. Just no data connectivity.
Any suggestions or reasons why this is occurring? I can easily swap back to an older nandroid image of alfa 13, but I would really like to get on a new version etc.
(Also, I would have made this post in the right dev section, but i lack 10 posts to gain access to it.)
Have you tried removing and replacing your SIM card ?
Also, check if your data counter has a limit set on
You could also manually configure your APN settings with your carrier's settings
Unfortunatly I have done all of those things. It doesn't even attempt to connect to data. I sit at 4 or 5 bars of signal and it never even connects to EDGE/3g at all. Yet if I flip back over to my older image it works flawlessly.
i have also problem with version 17, but i can't post it to developer forum (newbie here)
problem is that i can't hook on any network, no calls no messegas, i'm using croatian tele2/t-mobile....sometimes it connects but still nothing, no calss etc.
also problem (not so much a problem but a solution) when i installed ROM it went to bootloop, all you have to do is remove battery and power up again, and voila, it works, same problem happened when i installed gapps (same solution worked, everything installed from CWM latest version)
there were also posts regarding cwm not stiking after installing cynogen, i had no problem with it, i have latest cwm 5.0.2.3 (think so), sticks like hell tried couple of roms, still sticking
cheers
I have the same problem here... ICS 4.0.3 and my 3G stopped to work.
also tried new 18 version, still no luck, i'm staying on cynogenmod 7 (GB), only ICS version that worked was MUI but i don't like it very much....
http://forum.xda-developers.com/showthread.php?t=1398691
It has been messed around with a fair bit. Various methods have worked for different people. YMMV. I myself had such an issue with the stock FW (of all FWs...).
Hi people,
I'm opening a new thread because I have not seen a post about my kind of data drops here and couldn't find any by searching.
Thing is, since switching to Cyanogenmod 9 my data dropped. However these drops are kind of "invisible" because the system bar shows H/ G/ or else, but download/ upload arrows show only sometimes and if they don't, there's no data transmission. So I have to wait all the time until finally the system seemingly randomly decides to download stuff although there is a H/ G/ ... shown.
It worked with stock ROM and Bulletproof, but this issue arose when I flashed CM 9 and also persists with CM 10. Only thing I can find that looks like it can be similar to my problem is this thread: http://forum.xda-developers.com/showthread.php?t=2034998
Today I updated my radio finally, but still no change. Checked APN settings, everything seems to be fine.
Any help is greatly appreciated.
Unrelashade said:
Hi people,
I'm opening a new thread because I have not seen a post about my kind of data drops here and couldn't find any by searching.
Thing is, since switching to Cyanogenmod 9 my data dropped. However these drops are kind of "invisible" because the system bar shows H/ G/ or else, but download/ upload arrows show only sometimes and if they don't, there's no data transmission. So I have to wait all the time until finally the system seemingly randomly decides to download stuff although there is a H/ G/ ... shown.
It worked with stock ROM and Bulletproof, but this issue arose when I flashed CM 9 and also persists with CM 10. Only thing I can find that looks like it can be similar to my problem is this thread: http://forum.xda-developers.com/showthread.php?t=2034998
Today I updated my radio finally, but still no change. Checked APN settings, everything seems to be fine.
Any help is greatly appreciated.
Click to expand...
Click to collapse
Have you tried changing your APN settings to a different one? I've had similar issues with CM to what you're describing, switched to internet2.voicestream.com, haven't had many problems since.
i had the same problem before and i called t-mobile and they took me thru step on reconfiguring the step so now i can talk and surf the web at the same time try that but if that doesnt work try reflashing the rom again
I've just been lucky and it works with CM 9 this time and continues to work through new flashes of CM 9. Well... Sadly I don't know what went wrong, but it works now
Still want to answer you guys for archival purposes and if someone looks for a solution... and thanks for replying, it means a lot to me!
I live in Germany and imported the phone, it hasn't been sold here. So I can't ask for technical support.
I looked after the APNs but they were already the ones described as by my carrier.
So... Problem solved... for now. And thanks again!
Q&A for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
no sound, no auto-rotate
I am fairly new to Rooting and updating my Xoom to the newest Kitkat system. I am having 2 issues as of right now. The sound has never worked no matter what the settings say, and initially the auto-rotate was functioning and suddenly it stopped.
I have checked all options/setting and see nothing that should explain either of these 2 issues. I also didnt add any new apps in the time from initial update to the auto-rotate not working so if anyone has any suggestions or ideas, it would be greatly appreciated.
Again I am fairly new to all this, so the simpler or more detailed the potential solution the more likely I will understand it.
Thanks.
No sound on Omni 4.4 cmda version
I love the rom, only problem is I have no sound on the cmda version. I read the comments and saw people suggest install the top rom version over the bottom and then reflashing gapps. Should have sound. When I do this tablet boots but keeps giving me error "Unfortunately, the process com.android.phone has stopped" I say ok but it keeps coming up and wont let me get any further. Any suggestions?
volume issue
Anyone know how to fix the no sound issue in omni rom 4.4.4 stingray cdma? I cant get any sound at all. Help would be appreciated.
Took a couple go's but now up and running 4.4.2!
Thank you!
First time I've moved from the standard stock implementation, never even rooted the device before, but a couple attempts and following your instructions I managed to install BigPart, Flash omni-4.4.2-201XXXXX-everest-HOMEMADE_XXXX.zip, gapps-xxxx.zip & UPDATE-SuperSU-v1.86.zip.
I was about to give up on the Xoom and buy something newer, Tab S or something, but this appears to have put new life back into the old Xoom!
Followed the instructions above, but could not get it to clear Dalvik, failed every time. In the end I bit the bullet and formatted the internal drive, then flashed again - worked like a charm - figured since I was going to pass it over for a new one or this was going to work I had little to lose. As it happens I now seem to have it back & working well.
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Blackdogn3 said:
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Click to expand...
Click to collapse
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
slow1234 said:
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
Click to expand...
Click to collapse
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Blackdogn3 said:
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Click to expand...
Click to collapse
It has also been noted that 9.2.0 is rolling out and that it works on the Xoom. I updated yesterday and did a quick check - it does appear to work fine!
No Sound
After I flashed "[ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart." onto my Verizon Motorola Xoom 4G Tablet,
I have no sound at all and also the auto-rotate feature does not work (stays locked in portrait mode until reboot).
A number of other forum members have posted the same problem. Can we get a solution from someone on the forum?
have all but twrp v 2.6.3 big part
I have every thing I need except big part v2.6.3, none of the links I've found work? Does it have to be v2.6..3. ? There seem to be updated versions?
No 3g or 1x fallback
Install this today, everything went ok, execpt i could not get verizon 3g or 1x service. 4g works fine, when i have coverage. SBF back to stock again i guess.
e:unable to mount '/cache
The process for flashing the xoom (stingray model) seems somewhat straightforward. Yet I can't seem to get a working flash from the effort. Two problems:
1) during the "wipe this and that" stage while running in recovery, I get "FAILED" for each of the requisite areas to wipe, along with other messages such as that in the title. while i find a handful of other posts within this forum from folks experiencing the same problem, i find nothing in response with useful suggestions to fix what's apparently broken;
2) the tablet boots up to the OMNI splash-screen, and that's it.
I've repeated the steps at the head of this thread umpteen-zillion times. But the result is the same after each attempt. Either some critical step (or two) is/are missing from the initial (and horribly written) description, or I have the most stubborn tablet built.
i haven't bricked the thing... i can access it via adb, and i can get into recovery with no issues. what i can't seem to do is:
1) find a TWRP download using the links provided that doesn't trip quarantine due to virus detection; or,
2) find a coherent set of instructions that correctly describe the logical flow of the process of flashing a ROM on a Xoom.
Suggestions?
CDMA Voice and data programming
Hi,
Thanks for your effort and excellent work but I need some help, The main thing i want to try, is to get back my CDMA signal because since i tried the stock rom 4.1.2 i was not able to get any Data working there, my xoom is a just CDMA with no sim or LTE upgrade and i already tried 2 basebands on it the one with the last version of the stock room and the one that gets installed with the IMML update but no luck, if by any chance you have the first baseband it would be great i guess its something like 2.00.
Another question that I have is related to BP tools or programming the Cdma xoom, every time I try to start in bp tools I was not able to see the utility, just today i tried to connect to my PC and its not able to connect to CDMA Workshop or QPST, is there a way to do that? i need to activate something? any idea would be great!
And would be great if you have any MZ600 SBF where has included the first baseband 2.00 'cause probably it will help me to recover my 3g data (it's the only thing i didn't find and try).
Thanks!!!
is this have a default calling future like any mobile?
Thank You to OmniRom for xoom devolopers (all of you)
I just wanted to post a thank you to all of the developers of the omnirom for xoom. I was able to install it tonight, with a couple soft brick scares, but it is up and ruining. I love my xoom and am very appreciative.
Thanks....Steve
Xoom OnmiROM freezes
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
semi-anonymous said:
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
Click to expand...
Click to collapse
It's not real common for this to happen, but this same issue does occasionally happen on the CyanogenMod 11 Rom also. Other than this, and the workarounds to do a few other things in Android 4.4.4, the Xoom has been a real God send that is just amazing.
Non-Functioning Sensors post-flash w/Omni Stingray
Finished flashing XOOM 4G with (in order listed):
Xoom-Universal-Root
R.A.H._TWRPv2.6.3
omni-4.4.4-20141130-1816+0100-stingray_cdma-HOMEMADE
pa_gapps-modular-pico-4.4.4-20150215-signed
UPDATE-SuperSU-v2.45
After I noticed that the auto-rotate didn't work, I downloaded "My Android Sensors" from the Play Store. It shows the NO sensor is working. What gives..?
Looking for file EOS-Stingray-imm76l-radios-update.zip
Hi all,
Can someone help with the file ?
EOS-Stingray-imm76l-radios-update.zip
Thank you
The Rom works great.
I installed it month ago and it is working fine.
Batterylife is perfect and all things are working.
Thanks