Database Info

latest TWRP not installing android revolution HD ROM

I transferred the android revolution HD ROM and the super wipe script to my external SD card. after running the wipe script (successful) I tried flashing the ROM but TWRP keeps booting itself again. It doesnt flash the ROM. Now I have no OS installed. Please help!!

I have a similar issue except I just got the latest TWRP for TF101 on GooManager, and now it keeps saying Failed when I try to flash CM10

theratdude64 said:
I have a similar issue except I just got the latest TWRP for TF101 on GooManager, and now it keeps saying Failed when I try to flash CM10
Click to expand...
Click to collapse
I had installed CM10 with the Rayman modification earlier using the same version of TWRP. there was no issue. Has anyone else faced this as well?

Look at the instructions, download twrp 2.2.2.1 through too manager and flash... I updated mine like that and it works like a charm..
Sent from my Transformer using xda app-developers app

udupa82 said:
Look at the instructions, download twrp 2.2.2.1 through too manager and flash... I updated mine like that and it works like a charm..
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
I think there was a problem with the ROM zip I downloaded. I downloaded the Rayman JB AOSP, put it into the external SD via my phone and then tried flashing it. It worked. So now all ok. This ROM is very good so far. thanks for reply.

My problem was my ROM Zip as well, went through hell to redownload CM10, and finally worked. Was hard to figure it was that because it had the issue with all downloads. Apparently all corrupted that day

theratdude64 said:
My problem was my ROM Zip as well, went through hell to redownload CM10, and finally worked. Was hard to figure it was that because it had the issue with all downloads. Apparently all corrupted that day
Click to expand...
Click to collapse
HaHa...all's well that ends well right

Can't Flash CROM 4.1 please help!

I am having problems flashing Clean Inheritance Rom 4.1 and I believe my TWRP 2.4.4.0 may be the problem because it seems corrupted.
I followed the instructions on this thread. http://forum.xda-developers.com/showthread.php?t=2187982
So far I have been able to flash the patched twrp 2.4.4.0 and install the Asus stock 4.2.1 but every time I try to flash CROM 4.1 twrp will initiate updating partition and then it will just restart w/o warning to its home screen. I think that my twrp may be corrupted but i have used fastboot to repush the twrp multiple times and the asus stock 4.2.1 multiple times but this is not solving my issue. I see that fastboot has a erase command and wanted to know if i would use that to erase the recovery img completely and then try flashing twrp again to see if this resolves the issue or will the erase command brick my device? Also do I need to have my stock kernel for the CROM 4.1 to work? I am attaching screenshot of my tablet info, please let me know if more info is needed or if i need to upload a video of what is going on thanks.

have you redownloaded twrp mate it might have been a dodgy download or maybe a bad download of cromi, or you could try installing cromi 4.0 first
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD

robgee789 said:
have you redownloaded twrp mate it might have been a dodgy download or maybe a bad download of cromi, or you could try installing cromi 4.0 first
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Thanks robgee for the response, I have tried downloading the twrp patch and crom 4.0 and 4.1 but I am still having the same issue. Is there a way to flash CROM 4.1 without using twrp?

Hi Williams,
I'm also facing the same as you, and still searching for an answer. Tried flashing the SuperSU patch and my tablet is still not rooted.
Running the WW version. Wonder if anyone can help us....

What OS are you using?
xgrind said:
Hi Williams,
I'm also facing the same as you, and still searching for an answer. Tried flashing the SuperSU patch and my tablet is still not rooted.
Running the WW version. Wonder if anyone can help us....
Click to expand...
Click to collapse
I am still having issues but I am using Windows 8. Are you using Windows 8 as well?

im using windows 7 but i dont know if that has anything to do with it

No, im using Windows 7
williams2657 said:
I am still having issues but I am using Windows 8. Are you using Windows 8 as well?
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD

Update! bump please help someone
I am still having issues installing clean rom 4.1 but I noticed that if I keep selecting to flash the CROM 4.1 or 4.0 rom it will eventually initiate and let me choose the options and actually start flashing but once it says it is complete and i reboot it does not boot CROM just gets stuck at the asus boot screen. Then i must use fastboot to flash the stock android 4.2.1 to get the thing up and running and then twrp pretty much breaks after i use fastboot to flash teh android 4.2.1 blob file so I have to reflash the patched 2.4.4.0 again. I really do think the problem is with twrp because ever since this new 2.4.4.0 update i have been having issues i remember before twrp was a great utility but now it seems like it is a nightmare is there a way from me to try flashing crom 4.1 with clockwork mod yet?

williams2657 said:
I am still having issues installing clean rom 4.1 but I noticed that if I keep selecting to flash the CROM 4.1 or 4.0 rom it will eventually initiate and let me choose the options and actually start flashing but once it says it is complete and i reboot it does not boot CROM just gets stuck at the asus boot screen. Then i must use fastboot to flash the stock android 4.2.1 to get the thing up and running and then twrp pretty much breaks after i use fastboot to flash teh android 4.2.1 blob file so I have to reflash the patched 2.4.4.0 again. I really do think the problem is with twrp because ever since this new 2.4.4.0 update i have been having issues i remember before twrp was a great utility but now it seems like it is a nightmare is there a way from me to try flashing crom 4.1 with clockwork mod yet?
Click to expand...
Click to collapse
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1

evo bryan said:
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
Click to expand...
Click to collapse
I haven't tried that yet, I will try and let you know. Thanks for the response.

I did try to flash the SuperSU zip to root the stock rom. Able to flash in the SuperSU but still not rooted
evo bryan said:
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD

I was able to flash SuperSU as well
I was able to flash SuperSU and it was confirmed rooted with root checker. I still don't know why CleanROM will not work I have downloaded the ROM multiple times but it just refuses to flash is there something else I need to check in order to flash the rom or is TWRP partially broken where it can only flash very small simple files but not a complete custom rom?

I just downloaded the energy rom and tried to flash it do my device and ended up having the same issue. It says the rom has been flashed and completes but after reboot it is just stuck on Asus bootscreen and never boots into the OS. What the hell is going on

I think my bootloader is somehow screwed up because it can't boot any custom roms it can only boot the asus stock 4.2.1 when i flash the blob file using fastboot. Did i miss a step or something to allow the bootloader to boot custom roms

I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD

I'm using the WW version and has the same problem
robgee789 said:
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2

Update
robgee789 said:
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
xgrind said:
I'm using the WW version and has the same problem
Sent from my iPhone using Tapatalk 2
Click to expand...
Click to collapse
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.

Hi William,
Hope to hear good news
williams2657 said:
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2

williams2657 said:
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Click to expand...
Click to collapse
any news and just so you know clean rom just got updated

Yesterday tried again,
Still no luck. Anyone can share the link to patched TWRP for me to try again?
evo bryan said:
any news and just so you know clean rom just got updated
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2

[Q] confused how to flash cromi-xenogenesis. please help to ease my thoughts up

Good day. So my tf300t is rooted from stock 4.2.1 ota. Now im planning to flash my tablet using a new rom cromi-xenog...
Can you guys check if going on the right track installing this rom?
1. My tab is rooted 4.2.1 stock
2. Installed twrp 2.4.4.0
3. Whare should i put the files after download?
Thanks guys

brianaudio said:
Good day. So my tf300t is rooted from stock 4.2.1 ota. Now im planning to flash my tablet using a new rom cromi-xenog...
Can you guys check if going on the right track installing this rom?
1. My tab is rooted 4.2.1 stock
2. Installed twrp 2.4.4.0
3. Whare should i put the files after download?
Thanks guys
Click to expand...
Click to collapse
Put them anywhere on the sdcard. TWRP lets you select the ZIP file, when selecting "install".
You can even select multiple files into a queue and then flash them in one go.
Be sure to wipe everything from TWRP, including cache, data (factory reset) and system.
Note that this will not wipe the contents of your sdcard (at least the version for BL 4.1 won't).
Sent from my TF300T using Tapatalk HD

f69m said:
Put them anywhere on the sdcard. TWRP lets you select the ZIP file, when selecting "install".
You can even select multiple files into a queue and then flash them in one go.
Be sure to wipe everything from TWRP, including cache, data (factory reset) and system.
Note that this will not wipe the contents of your sdcard (at least the version for BL 4.1 won't).
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
So this means, the new 4.2.1 boot loader is good to go on this rom before flashing? Thanks so much

brianaudio said:
So this means, the new 4.2.1 boot loader is good to go on this rom before flashing? Thanks so much
Click to expand...
Click to collapse
Yes, currently CROMi is one of the two ROMs supporting BL 4.2.
Just make sure to pick the right version (4.3b6 seems OK).
Sent from my TF300T using Tapatalk HD

Just something to take note of is you said that you installed twrp 2.4.4.0, I hope you meant the patched 2.4.4.0 - 4.2 version which is the only compatible twrp version for the 4.2.1 bootloader.
All other version of twrp for the tf300 will ask for password and will not be able to mount partitions which in about 90% of cases will cause the device to brick - fastboot will no longer be able to flash anything http://forum.xda-developers.com/showthread.php?t=2179874
Patched version of twrp 2.4.4.0 - 4.2 can be found here
http://forum.xda-developers.com/showthread.php?t=2187982
or
http://forum.xda-developers.com/showthread.php?t=2195883

pjc21 said:
Just something to take note of is you said that you installed twrp 2.4.4.0, I hope you meant the patched 2.4.4.0 - 4.2 version which is the only compatible twrp version for the 4.2.1 bootloader.
All other version of twrp for the tf300 will ask for password and will not be able to mount partitions which in about 90% of cases will cause the device to brick - fastboot will no longer be able to flash anything http://forum.xda-developers.com/showthread.php?t=2179874
Patched version of twrp 2.4.4.0 - 4.2 can be found here
http://forum.xda-developers.com/showthread.php?t=2187982
or
http://forum.xda-developers.com/showthread.php?t=2195883
Click to expand...
Click to collapse
Yeah i did this tutorial on twrp http://forum.xda-developers.com/showthread.php?t=2187982. So this mean if i flash my tablet using this tutorial i will be safe? Im just getting overwhelmed, please bare with me guys. Idont want to brick my tf. Thanks so much.

f69m said:
Yes, currently CROMi is one of the two ROMs supporting BL 4.2.
Just make sure to pick the right version (4.3b6 seems OK).
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
So the other 2 roms in cromi are no good? I downloaded the 2nd one not the 4.3b. Am i still good to flash it?

brianaudio said:
Yeah i did this tutorial on twrp http://forum.xda-developers.com/showthread.php?t=2187982. So this mean if i flash my tablet using this tutorial i will be safe? Im just getting overwhelmed, please bare with me guys. Idont want to brick my tf. Thanks so much.
Click to expand...
Click to collapse
Yes that's the guide you want, follow that and you should be fine.
As to the roms you can flash on the 4.2.1 bootloader, you have only the following choices at the moment:
- CROMi-Xenogenesis 4.2 by sbdags, or you can go with the 4.3 beta , up to 4.3b6 at the moment (I'm using b6 now)
http://forum.xda-developers.com/showthread.php?t=2204166
- Energy by NRGZ28, stock or themed versions
http://forum.xda-developers.com/showthread.php?t=2010108

brianaudio said:
Yeah i did this tutorial on twrp http://forum.xda-developers.com/showthread.php?t=2187982. So this mean if i flash my tablet using this tutorial i will be safe? Im just getting overwhelmed, please bare with me guys. Idont want to brick my tf. Thanks so much.
Click to expand...
Click to collapse
Yes, if you used the patched TWRP from that thread you should be fine.
brianaudio said:
So the other 2 roms in cromi are no good? I downloaded the 2nd one not the 4.3b. Am i still good to flash it?
Click to expand...
Click to collapse
Just had a quick look. CROMi 4.2 should be fine too.
Sent from my TF300T using Tapatalk HD

f69m said:
Yes, if you used the patched TWRP from that thread you should be fine.
Just had a quick look. CROMi 4.2 should be fine too.
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
Can confirm CROMI 4.2 works fine installed from patched TWRP 2.4.4.0. Did exactly that and it has been running flawlessly.

f69m said:
Yes, currently CROMi is one of the two ROMs supporting BL 4.2.
Just make sure to pick the right version (4.3b6 seems OK).
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
What is the other rom? I tried xeno and its so stable and smooth.

brianaudio said:
What is the other rom? I tried xeno and its so stable and smooth.
Click to expand...
Click to collapse
Energy: http://forum.xda-developers.com/showthread.php?t=2010108
Sent from my TF300T using Tapatalk HD

[Q] CM Stuck on logo animation while booting

Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
- Rooted it using the following guide (it now has ICS)
- SIM Unlocked it using the following guide (now it works on other networks)
- Updated to CWM 6.0.3.8, since JB roms needs it
- Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.

TINGEA said:
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
-Rooted it using the following guide (it now has ICS)
-SIM Unlocked it using the following guide (now it works on other networks)
-Updated to CWM 6.0.3.8, since JB roms needs it
-Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
Click to expand...
Click to collapse
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Somcom3X said:
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!

TINGEA said:
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
Click to expand...
Click to collapse
No boot loaders man. This is before Samsung's complications.
Recovery is here.
http://d-h.st/AFu
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

TINGEA said:
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.

Somcom3X said:
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Click to expand...
Click to collapse
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?

BTW - when I was flashing via Odin my upload phone screen was showing that I have a custom rom and the counter was 1.... do I need to fix that?

TINGEA said:
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
Click to expand...
Click to collapse
SOLUTION:
The reason your stock recovery system keeps getting overwritten at Android startup is because of a script that is being run.* All you need to do is either rename this script or simply delete it.
Please keep in mind that if you restore your stock ROM, this script will be restored with it so you will have to rename or delete it again.* Do the following:*
1.
Make sure your device is powered on and running normally,
2.
Make sure you have rooted your device and that you have all of the necessary permissions in order to manipulate system files.*
3.
In the root file system go to \system\etc
4.
Find the file named install-recovery.sh and either rename it or, as I did, delete it.*
That’s all there is to it.*
Please keep in mind that you will need to flash your custom system recovery one more time after modifying the script file.* After that, reboot away and you will always be able to get back into your new system recovery.
Good Luck and Happy Tweaking.
Click to expand...
Click to collapse
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Somcom3X said:
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but I'm not sure this is needed for my case. I read the original blog post and my recovery does not get overwritten. I actually rebooted multiple times into CWM recovery and each time it is the same 6.0.4.4.
I also went into the /system/etc folder and there is no install_recovery.sh file.
to clarify, here is where I'm stuck now:
- when I use CWM 6.0.3.8 CM install completes successfully, but then CM will not boot, and will keep on cycling on the boot logo screen.
- when I use CWM 6.0.4.4 I can't start to install CM as it complained that my phone is not t769.
in all cases I'm using CM 10.2 nightly for T769.
Thanks for the help.

You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

TINGEA said:
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Somcom3X said:
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but this is more trouble than what I wanted to put in - I'll stick with the rooted stock ROM I have. I was hoping the process was a little more straight forward, similar to my SGS3.
thanks for all your help thus far!

Somcom3X said:
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!

TINGEA said:
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
Click to expand...
Click to collapse
Hmm. Go back to stock ics, flash a 10.2 recovery, then flash whatever you desire.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

TINGEA said:
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It would be cwm 6.0.2.7
You can flash the img through a zip or by terminal on the phone.
Odin needs a tar'd recovery img
Sorry been very busy.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=2577265
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.

TINGEA said:
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
Click to expand...
Click to collapse
I'm very sorry for the delay. Been very very busy.
https://www.dropbox.com/s/awp1zy4u3x34a2v/CWM-cm-10.2-Recovery-t769.zip
That is my personal 10.2 recovery. Works fine for me.
The author is me, but I was too lazy to change the lines.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

CWM v6.0.4.5

So I'm running CWM 6.0.4.5 and was playing with 4.4 Roms but every time I try to flash a 4.3 or 4.2 I get am error (I think it was status 7) I thought CWM could flash any Android version. Or does CWM have the same issue TWRP has?

bucket81 said:
So I'm running CWM 6.0.4.5 and was playing with 4.4 Roms but every time I try to flash a 4.3 or 4.2 I get am error (I think it was status 7) I thought CWM could flash any Android version. Or does CWM have the same issue TWRP has?
Click to expand...
Click to collapse
For KitKat, you will need to use this version of CWM:
http://forum.xda-developers.com/showpost.php?p=48507691&postcount=1

cmendonc2 said:
For KitKat, you will need to use this version of CWM:
http://forum.xda-developers.com/showpost.php?p=48507691&postcount=1
Click to expand...
Click to collapse
No I can install kitkat with my current CWM just not any other roms no 4.2 or 4.3 roms.
Sent from my XT907 using Tapatalk

bucket81 said:
No I can install kitkat with my current CWM just not any other roms no 4.2 or 4.3 roms.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Is that the custom CWM or the regular one? I can't imagine why the regular one won't, but I don't really keep up with CWM.

cmendonc2 said:
Is that the custom CWM or the regular one? I can't imagine why the regular one won't, but I don't really keep up with CWM.
Click to expand...
Click to collapse
I got it from @lj50036 but cant find the link he gave so I'm not sure....

And I can't restore my factory back up, it just boots to the Asus logo and sticks. But I can reinstall 4.4 roms and they work fine and I can restore them as backups.
Sent from my XT907 using Tapatalk

CM-11
bucket81 said:
I got it from @lj50036 but cant find the link he gave so I'm not sure....
Click to expand...
Click to collapse
That link came from the CM-11 Fourm for the 300!! :silly:

lj50036 said:
That link came from the CM-11 Fourm for the 300!! :silly:
Click to expand...
Click to collapse
Yea, I found it last night messing with my recovery. I haven't been able to succsesfully downgrade. I tried the old CWM and TWRP 2.5.0.0 but haven't been able to mount any storage again... but I reflashed that recovery and can mount things. I'm just going to stick with the CM 11 nightlys they seam stable enough.
Sent from my TF300T