I transferred the android revolution HD ROM and the super wipe script to my external SD card. after running the wipe script (successful) I tried flashing the ROM but TWRP keeps booting itself again. It doesnt flash the ROM. Now I have no OS installed. Please help!!
I have a similar issue except I just got the latest TWRP for TF101 on GooManager, and now it keeps saying Failed when I try to flash CM10
theratdude64 said:
I have a similar issue except I just got the latest TWRP for TF101 on GooManager, and now it keeps saying Failed when I try to flash CM10
Click to expand...
Click to collapse
I had installed CM10 with the Rayman modification earlier using the same version of TWRP. there was no issue. Has anyone else faced this as well?
Look at the instructions, download twrp 2.2.2.1 through too manager and flash... I updated mine like that and it works like a charm..
Sent from my Transformer using xda app-developers app
udupa82 said:
Look at the instructions, download twrp 2.2.2.1 through too manager and flash... I updated mine like that and it works like a charm..
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
I think there was a problem with the ROM zip I downloaded. I downloaded the Rayman JB AOSP, put it into the external SD via my phone and then tried flashing it. It worked. So now all ok. This ROM is very good so far. thanks for reply.
My problem was my ROM Zip as well, went through hell to redownload CM10, and finally worked. Was hard to figure it was that because it had the issue with all downloads. Apparently all corrupted that day
theratdude64 said:
My problem was my ROM Zip as well, went through hell to redownload CM10, and finally worked. Was hard to figure it was that because it had the issue with all downloads. Apparently all corrupted that day
Click to expand...
Click to collapse
HaHa...all's well that ends well right
Related
Hello, I installed wildchild on my 4gslide and I wanted to know is there a way to get to the market. I am starting to think I should have kept my original rom. Any suggestions??? I wanted to download a few games. Am I bleep out off luck???
wesomatic said:
Hello, I installed wildchild on my 4gslide and I wanted to know is there a way to get to the market. I am starting to think I should have kept my original rom. Any suggestions??? I wanted to download a few games. Am I bleep out off luck???
Click to expand...
Click to collapse
Click on the icon in your app drawer that says "Play."
Flash gapps
Sent from my myTouch_4G_Slide using Tapatalk 2
I am flashing gapps as I speak...
Downloaded gapps and flashed but do not see any differance and do no see how to download any games. What did I do wrong? I followed all of the prompts... No luck...
If you did everything the right way you should see either "Market" or "Play Store" in your app drawer. Did you flash the gapps for ICS?
I flashed the gapps for rom wildchild through goomanager. Did I miss something?
wesomatic said:
I flashed the gapps for rom wildchild through goomanager. Did I miss something?
Click to expand...
Click to collapse
Sent from my myTouch_4G_Slide using Tapatalk 2
Wow!!! Thats nice! I do not have that.... What rom do you use?
The gapps .zip file is supposed to be flashed through ClockworkMod Recovery.
OK. When I flashed the updates and the gapps, it takes me to clockwork recovery. Do I look for the zipfile from the sd card? Or is it an update flash from the sd card? I know I must be doing something wrong. But I am very close!!! I was just rebooting my phone from clockwork recovery thinking the update and gapps were flashed already...
I found out what I did wrong. I was not flashing correctly. I was supposed to find the goomaneger file and flashed from that. Flashed the first update corectly...
Now I have to fine what gapps to flash... Seems like I should start from the oldest to the newest? Some will take and some dont... Is it hit and miss????
wesomatic said:
Now I have to fine what gapps to flash... Seems like I should start from the oldest to the newest? Some will take and some dont... Is it hit and miss????
Click to expand...
Click to collapse
You need ICS gapps
Sent from my myTouch_4G_Slide using Tapatalk 2
I remember my first AOSP flash. I went one month with out GAPP's. Then my friend showed me my error Xo
Sent from my myTouch_4G_Slide using Tapatalk 2
Thank you. This is my first use of a custom rom. I have been playing around with this for about a month. I wound up buying a back up phone "Samsung Galaxy S 4g" for 98 cents for a backup. Rooted that with no problem. Did not put a rom on it yet until I get my Doubleshot running right... This is fun. I am hooked. Thanks to everybody for their help. I am HOOKED!!!! Will keep you posted....:good:
Everything is working... Got the market. Thank you very much for all of your help. Soooo... S3 or HTC1????
All of a sudden yesterday my phone started boot looping while I was running Invisiblek's CM10. I finally got that sorted out, and used ODIN to get me to the rooted version of the stock ROM. However, now when I flash custom ROMs, I get a boot loop and have to restore back to the rooted version of stock. I've tried Invisiblek's CM10 again, Bean's... oh, and my CWM background is missing and is just black. I've also noticed(not sure if this could be why) that when I go to the mount section under CWM, both system and data keep defaulting to unmounted. Any suggestions?
Have you been using ezrecovery to flash recoveries before flashing ROMs??
Sent from my SCH-I535 using Tapatalk 2
hopesrequiem said:
Have you been using ezrecovery to flash recoveries before flashing ROMs??
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Hm, no. The installation instructions never made any mention of ezrecovery. Is that my problem?
Flashed CWM through ezrecovery. CWM is working again it appears. Thank you very much!!
Krog216 said:
Hm, no. The installation instructions never made any mention of ezrecovery. Is that my problem?
Click to expand...
Click to collapse
What recovery are you using?
Sent from my Synergy GS3
I have a quick question. If I want to go from TWRP 2.2.0 to CWM Touch is it as simple as flashing the CWM Touch zip in TWRP? I'm a little worried about flashing it within TWRP and bricking my phone. Coming from CWM touch to TWRP I simply downloaded GooManager and installed it within the app but going back to Touch seems trickier.
Why leave twrp what's the problem
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
Why leave twrp what's the problem
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Exactly what i was about to ask
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
hudson2508 said:
I have a quick question. If I want to go from TWRP 2.2.0 to CWM Touch is it as simple as flashing the CWM Touch zip in TWRP? I'm a little worried about flashing it within TWRP and bricking my phone. Coming from CWM touch to TWRP I simply downloaded GooManager and installed it within the app but going back to Touch seems trickier.
Click to expand...
Click to collapse
Yup, its as simple as flashing the zip. Make a fresh backup with cwm after you do it:thumbup:
Sent from my SGH-I727 using Tapatalk 2
I tried to flash Liquid Pre RC1 and got an error. I think you have to use CWM Touch to get it to flash and figured I'd go back to CWM. TWRP has been great but I feel like most all Roms work in CWM Touch but not all work in TWRP.
I've been trying to find a more stable JB rom from CM10 Alpha 3 and heard Liquid was pretty strong. Just tired of all the lockups and not ready to go back down to CM9 yet.
I flash everything in twrp your doing something wrong
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hudson2508 said:
I tried to flash Liquid Pre RC1 and got an error. I think you have to use CWM Touch to get it to flash and figured I'd go back to CWM. TWRP has been great but I feel like most all Roms work in CWM Touch but not all work in TWRP.
Click to expand...
Click to collapse
I've found it's the exact opposite. TWRP and CWM Touch are slightly different in how they work; you sure you're not hitting the wrong button by mistake?
Not sure what happened but I tried flashing it once and it failed. Re downloaded the zip and tried a second time with the same error. The MD5 checked out and everything. I've flashed many times with TWRP with no issue so I'm not sure what's going on. Can anyone confirm that Liquid flashes successfully in TWRP? Not counting out user error but I've never had an issue flashing anything.
hudson2508 said:
Not sure what happened but I tried flashing it once and it failed. Re downloaded the zip and tried a second time with the same error. The MD5 checked out and everything. I've flashed many times with TWRP with no issue so I'm not sure what's going on. Can anyone confirm that Liquid flashes successfully in TWRP? Not counting out user error but I've never had an issue flashing anything.
Click to expand...
Click to collapse
What error is it returning
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
What error is it returning
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Finished running boot script
E: Unable to open zip file.
Error flashing zip '/sdcard/goomanager/>_Liquid....
I had issues with that use twrps built in file manager and change the permissions Chmod 777 it was once but it may help
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Probably a stupid question, but have you tried re-downloading Liquid? MD5 checks don't always reveal all flaws.
T.J. Bender said:
Probably a stupid question, but have you tried re-downloading Liquid? MD5 checks don't always reveal all flaws.
Click to expand...
Click to collapse
I did, tried downloading on the phone once and on my pc. Both failed.
im using the latest twrp and im not getting to install cm10.1 roms... how do i install cwm recovery over twrp to install the cm10.1 roms?
kemroy said:
im using the latest twrp and im not getting to install cm10.1 roms... how do i install cwm recovery over twrp to install the cm10.1 roms?
Click to expand...
Click to collapse
Wrong forum to post your question in but should be able to use your pc to flash the cwm
Sent from my SAMSUNG-SGH-I747 using xda premium
thanx bro could u direct me to a detailed guide because ive been searching like crazy
You can install CM10.1 on TWRP, U don't need CWM bro.
Hazard17 said:
You can install CM10.1 on TWRP, U don't need CWM bro.
Click to expand...
Click to collapse
trust me im trying and no matter what im gettin error 7 using the latest twrp and im on cleanrom inheritance 3.3
kemroy said:
trust me im trying and no matter what im gettin error 7 using the latest twrp and im on cleanrom inheritance 3.3
Click to expand...
Click to collapse
I had the same problem, installing cwm solved it for me. I used the guide in this forum.
http://forum.xda-developers.com/showthread.php?t=1668173
Sent from my DROIDX using Tapatalk 2
Try to install Cyanogenmod 10.1 by the newest TWRP 2.4.2.0. Update TWRP to the newest version, could fix your problem.
Hazard17 said:
Try to install Cyanogenmod 10.1 by the newest TWRP 2.4.2.0. Update TWRP to the newest version, could fix your problem.
Click to expand...
Click to collapse
still wont work bro..same error...just dont get why
kemroy said:
still wont work bro..same error...just dont get why
Click to expand...
Click to collapse
I was having the same error 7 when trying to install 10.1. In my case, I went back to the TWRP download site, and saw that I had simply went to the end of the download list for tf300 and downloaded the last entry for JB. But that actually was the TF300TG not TF300T (which I have). After downloading and installing TWRP for TF300T, 10.1 installed perfectly.
Again, this was my case, operator error. :fingers-crossed:
flipflargin said:
I was having the same error 7 when trying to install 10.1. In my case, I went back to the TWRP download site, and saw that I had simply went to the end of the download list for tf300 and downloaded the last entry for JB. But that actually was the TF300TG not TF300T (which I have). After downloading and installing TWRP for TF300T, 10.1 installed perfectly.
Again, this was my case, operator error. :fingers-crossed:
Click to expand...
Click to collapse
im normally sure not to make that mistake..i upgraded to the newest twrp this mornin and same error with a stable and a nightly rom...im loosing faith..
kemroy said:
im normally sure not to make that mistake..i upgraded to the newest twrp this mornin and same error with a stable and a nightly rom...im loosing faith..
Click to expand...
Click to collapse
i had also error 7, when tried to install jellybro CM.
latest TWRP-
sad
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
explicitKC said:
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
Click to expand...
Click to collapse
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
explicitKC said:
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
Click to expand...
Click to collapse
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
explicitKC said:
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
explicitKC said:
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
Click to expand...
Click to collapse
I am currently using TWRP, but I have used PhilzTouch in the past. They both work pretty well. TWRP has bigger buttons that are spaced out better and has an easier interface to use. PhilzTouch has some other features but isn't as polished. It is just a matter of personal preference. Some Roms will have a recommended recovery listed, though.
Also, to make sure that the zip you download isn't corrupted, check the md5 of the zip you download against the md5 on the download page.
Sent from my SGH-T989 using Tapatalk
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Edit:-
One more thing I would like to add,Phillz touch blackhawk supports dual-booting through next kernel
lokesh.3440 said:
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Click to expand...
Click to collapse
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
really,which one are you referring to ? TWRP 2.7.0.3 ?
lokesh.3440 said:
really,which one are you referring to ? TWRP 2.7.0.3 ?
Click to expand...
Click to collapse
I am currently using 2.7.0.1 but 2.7.0.3 also has it. The one that I linked to was compiled by Android-Andi
Sent from my SGH-T989 using XDA mobile app
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Just wanted to say thanks again to jrc2. I went with TWRP because backup to sd card was not working on CWM and Philz. Backup would start and in the middle of backing up data or system tab would just reboot. But TWRP looks ok and flashed with no problems.